- Add validation in accordance with WebGPU `setViewport` valid usage for `x`, `y` and `this.[[attachment_size]]`. By @James2022-rgb in [#4058](https://github.com/gfx-rs/wgpu/pull/4058)
-`wgpu::CreateSurfaceError` and `wgpu::RequestDeviceError` now give details of the failure, but no longer implement `PartialEq` and cannot be constructed. By @kpreid in [#4066](https://github.com/gfx-rs/wgpu/pull/4066) and [#4145](https://github.com/gfx-rs/wgpu/pull/4145)
- Add stub support for device destroy and device validity. By @bradwerth in [4163](https://github.com/gfx-rs/wgpu/pull/4163) and in [4212](https://github.com/gfx-rs/wgpu/pull/4212)
- Don't bother calling `vkFreeCommandBuffers` when `vkDestroyCommandPool` will take care of that for us. By @jimblandy in [#4059](https://github.com/gfx-rs/wgpu/pull/4059)
-`Queue::on_submitted_work_done` callbacks will now always be called after all previous `BufferSlice::map_async` callbacks, even when there are no active submissions. By @cwfitzgerald in [#4036](https://github.com/gfx-rs/wgpu/pull/4036).
- Fix `clear` texture views being leaked when `wgpu::SurfaceTexture` is dropped before it is presented. By @rajveermalviya in [#4057](https://github.com/gfx-rs/wgpu/pull/4057).
- Add `Feature::SHADER_UNUSED_VERTEX_OUTPUT` to allow unused vertex shader outputs. By @Aaron1011 in [#4116](https://github.com/gfx-rs/wgpu/pull/4116).
- Fix a panic in `surface_configure`. By @nical in [#4220](https://github.com/gfx-rs/wgpu/pull/4220) and [#4227](https://github.com/gfx-rs/wgpu/pull/4227)
- Fix enabling `wgpu::Features::PARTIALLY_BOUND_BINDING_ARRAY` not being actually enabled in vulkan backend. By @39ali in[#3772](https://github.com/gfx-rs/wgpu/pull/3772).
- Don't pass `vk::InstanceCreateFlags::ENUMERATE_PORTABILITY_KHR` unless the `VK_KHR_portability_enumeration` extension is available. By @jimblandy in[#4038](https://github.com/gfx-rs/wgpu/pull/4038).
- Added the following examples: By @JustAnotherCodemonkey in [#3885](https://github.com/gfx-rs/wgpu/pull/3885).
- repeated-compute
- storage-texture
- render-to-texture
- uniform-values
- hello-workgroups
- hello-synchronization
- Created `wgpu-example::utils` module to contain misc functions and such that are common code but aren't part of the example framework. Add to it the functions `output_image_wasm` and `output_image_native`, both for outputting `Vec<u8>` RGBA images either to the disc or the web page. By @JustAnotherCodemonkey in [#3885](https://github.com/gfx-rs/wgpu/pull/3885).
- Removed `capture` example as it had issues (did not run on wasm) and has been replaced by `render-to-texture` (see above). By @JustAnotherCodemonkey in [#3885](https://github.com/gfx-rs/wgpu/pull/3885).
- Fix x11 hang while resizing on vulkan. @Azorlogh in [#4184](https://github.com/gfx-rs/wgpu/pull/4184).
## v0.17.1 (2023-09-27)
### Added/New Features
- Add `get_mapped_range_as_array_buffer` for faster buffer read-backs in wasm builds. By @ryankaplan in [#4042] (https://github.com/gfx-rs/wgpu/pull/4042).
### Bug Fixes
#### DX12
- Fix panic on resize when using DX12. By @cwfitzgerald in [#4106](https://github.com/gfx-rs/wgpu/pull/4106)
#### Vulkan
- Suppress validation error caused by OBS layer. This was also fixed upstream. By @cwfitzgerald in [#4002](https://github.com/gfx-rs/wgpu/pull/4002)
- Work around bug in nvidia's vkCmdFillBuffer implementation. By @cwfitzgerald in [#4132](https://github.com/gfx-rs/wgpu/pull/4132).
This is the first release that featured `wgpu-info` as a binary crate for getting information about what devices wgpu sees in your system. It can dump the information in both human readable format and json.
Up until this point, wgpu has made the assumption that threads do not exist on wasm. With the rise of libraries like [`wasm_thread`](https://crates.io/crates/wasm_thread) making it easier and easier to do wasm multithreading this assumption is no longer sound. As all wgpu objects contain references into the JS heap, they cannot leave the thread they started on.
As we understand that this change might be very inconvenient for users who don't care about wasm threading, there is a crate feature which re-enables the old behavior: `fragile-send-sync-non-atomic-wasm`. So long as you don't compile your code with `-Ctarget-feature=+atomics`, `Send` and `Sync` will be implemented again on wgpu types on wasm. As the name implies, especially for libraries, this is very fragile, as you don't know if a user will want to compile with atomics (and therefore threads) or not.
By @daxpedda in [#3691](https://github.com/gfx-rs/wgpu/pull/3691)
#### Power Preference is now optional
The `power_preference` field of `RequestAdapterOptions` is now optional. If it is `PowerPreference::None`, we will choose the first available adapter, preferring GPU adapters over CPU adapters.
By @Aaron1011 in [#3903](https://github.com/gfx-rs/wgpu/pull/3903)
Removed the backend_bits parameter from `initialize_adapter_from_env` and `initialize_adapter_from_env_or_default`. If you want to limit the backends used by this function, only enable the wanted backends in the instance.
- Added support for importing external buffers using `buffer_from_raw` (Dx12, Metal, Vulkan) and `create_buffer_from_hal`. By @AdrianEddy in [#3355](https://github.com/gfx-rs/wgpu/pull/3355)
- Work around [Vulkan-ValidationLayers#5671](https://github.com/KhronosGroup/Vulkan-ValidationLayers/issues/5671) by ignoring reports of violations of [VUID-vkCmdEndDebugUtilsLabelEXT-commandBuffer-01912](https://registry.khronos.org/vulkan/specs/1.3-extensions/html/vkspec.html#VUID-vkCmdEndDebugUtilsLabelEXT-commandBuffer-01912). By @jimblandy in [#3809](https://github.com/gfx-rs/wgpu/pull/3809).
- Add `get_mapped_range_as_array_buffer` for faster buffer read-backs in wasm builds. By @ryankaplan in [#4042] (https://github.com/gfx-rs/wgpu/pull/4042).
- Better documentation for draw, draw_indexed, set_viewport and set_scissor_rect. By @genusistimelord in [#3860](https://github.com/gfx-rs/wgpu/pull/3860)
- Validate that `descriptor.usage` is not empty in `create_buffer` by @nical in [#3928](https://github.com/gfx-rs/wgpu/pull/3928)
- Update `max_bindings_per_bind_group` limit to reflect spec changes by @ErichDonGubler and @nical in [#3943](https://github.com/gfx-rs/wgpu/pull/3943) [#3942](https://github.com/gfx-rs/wgpu/pull/3942)
- Add better docs for `Limits`, listing the actual limits returned by `downlevel_defaults` and `downlevel_webgl2_defaults` by @JustAnotherCodemonkey in [#3988](https://github.com/gfx-rs/wgpu/pull/3988)
- Fix OpenGL/EGL backend not respecting non-sRGB texture formats in `SurfaceConfiguration`. by @liquidev in [#3817](https://github.com/gfx-rs/wgpu/pull/3817)
- Fix Multiview to disable validation of TextureViewDimension and ArrayLayerCount. By @MalekiRe in [#3779](https://github.com/gfx-rs/wgpu/pull/3779#issue-1713269437).
#### Vulkan
- Fix incorrect aspect in barriers when using emulated Stencil8 textures. By @cwfitzgerald in [#3833](https://github.com/gfx-rs/wgpu/pull/3833).
- Implement depth-clip-control using depthClamp instead of VK_EXT_depth_clip_enable. By @AlbinBernhardssonARM [#3892](https://github.com/gfx-rs/wgpu/pull/3892).
- Fix enabling `wgpu::Features::PARTIALLY_BOUND_BINDING_ARRAY` not being actually enabled in vulkan backend. By @39ali in[#3772](https://github.com/gfx-rs/wgpu/pull/3772).
- Make the `Id` type that is exposed when using the `expose-ids` feature implement `Send` and `Sync` again. This was unintentionally changed by the v0.16.0 release and is now fixed.
- Increase the `max_storage_buffers_per_shader_stage` and `max_storage_textures_per_shader_stage` limits based on what the hardware supports. by @Elabajaba in [#3798]https://github.com/gfx-rs/wgpu/pull/3798
The `TextureFormat::describe` function was removed in favor of separate functions: `block_dimensions`, `is_compressed`, `is_srgb`, `required_features`, `guaranteed_format_features`, `sample_type` and `block_size`.
Buffers used as the `destination` argument of `CommandEncoder::resolve_query_set` now have to contain the `QUERY_RESOLVE` usage instead of the `COPY_DST` usage.
```diff
let destination = device.create_buffer(&wgpu::BufferDescriptor {
- Change type of `mip_level_count` and `array_layer_count` (members of `TextureViewDescriptor` and `ImageSubresourceRange`) from `Option<NonZeroU32>` to `Option<u32>`. By @teoxoy in [#3445](https://github.com/gfx-rs/wgpu/pull/3445)
- Change type of `bytes_per_row` and `rows_per_image` (members of `ImageDataLayout`) from `Option<NonZeroU32>` to `Option<u32>`. By @teoxoy in [#3529](https://github.com/gfx-rs/wgpu/pull/3529)
- On Web, `Instance::create_surface_from_canvas()` and `create_surface_from_offscreen_canvas()` now take the canvas by value. By @daxpedda in [#3690](https://github.com/gfx-rs/wgpu/pull/3690)
- Don't include ANSI terminal color escape sequences in shader module validation error messages. By @jimblandy in [#3591](https://github.com/gfx-rs/wgpu/pull/3591)
- Error in native when using a filterable `TextureSampleType::Float` on a multisample `BindingType::Texture`. By @mockersf in [#3686](https://github.com/gfx-rs/wgpu/pull/3686)
- On Web, the size of the canvas is adjusted when using `Surface::configure()`. If the canvas was given an explicit size (via CSS), this will not affect the visual size of the canvas. By @daxpedda in [#3690](https://github.com/gfx-rs/wgpu/pull/3690)
-`copyTextureToTexture` src/dst aspects must both refer to all aspects of src/dst format. By @teoxoy in [#3431](https://github.com/gfx-rs/wgpu/pull/3431)
- Validate before extracting texture selectors. By @teoxoy in [#3487](https://github.com/gfx-rs/wgpu/pull/3487)
- Fix fatal errors (those which panic even if an error handler is set) not including all of the details. By @kpreid in [#3563](https://github.com/gfx-rs/wgpu/pull/3563)
- Validate shader location clashes. By @emilk in [#3613](https://github.com/gfx-rs/wgpu/pull/3613)
- Fix surfaces not being dropped until exit. By @benjaminschaaf in [#3647](https://github.com/gfx-rs/wgpu/pull/3647)
- Fix handling of `None` values for `depth_ops` and `stencil_ops` in `RenderPassDescriptor::depth_stencil_attachment`. By @niklaskorz in [#3660](https://github.com/gfx-rs/wgpu/pull/3660)
- Fix `copy_external_image_to_texture`, `copy_texture_to_texture` and `copy_buffer_to_texture` not taking the specified index into account if the target texture is a cube map, 2D texture array or cube map array. By @daxpedda [#3641](https://github.com/gfx-rs/wgpu/pull/3641)
- Fix disabling of vertex attributes with non-consecutive locations. By @Azorlogh in [#3706](https://github.com/gfx-rs/wgpu/pull/3706)
#### Metal
- Fix metal erroring on an `array_stride` of 0. By @teoxoy in [#3538](https://github.com/gfx-rs/wgpu/pull/3538)
-`create_texture` returns an error if `new_texture` returns NULL. By @jinleili in [#3554](https://github.com/gfx-rs/wgpu/pull/3554)
- Fix shader bounds checking being ignored. By @FL33TW00D in [#3603](https://github.com/gfx-rs/wgpu/pull/3603)
#### Vulkan
- Treat `VK_SUBOPTIMAL_KHR` as `VK_SUCCESS` on Android due to rotation issues. By @James2022-rgb in [#3525](https://github.com/gfx-rs/wgpu/pull/3525)
### Examples
- Use `BufferUsages::QUERY_RESOLVE` instead of `BufferUsages::COPY_DST` for buffers used in `CommandEncoder::resolve_query_set` calls in `mipmap` example. By @JolifantoBambla in [#3489](https://github.com/gfx-rs/wgpu/pull/3489)
## v0.15.3 (2023-03-22)
### Bug Fixes
#### Metal
- Fix incorrect mipmap being sampled when using `MinLod <= 0.0` and `MaxLod >= 32.0` or when the fragment shader samples different Lods in the same quad. By @cwfitzgerald in [#3610](https://github.com/gfx-rs/wgpu/pull/3610).
#### GLES
- Fix `Vertex buffer is not big enough for the draw call.` for ANGLE/Web when rendering with instance attributes on a single instance. By @wumpf in [#3596](https://github.com/gfx-rs/wgpu/pull/3596)
- Enable `WEBGL_debug_renderer_info` before querying unmasked vendor/renderer to avoid crashing on emscripten in [#3519](https://github.com/gfx-rs/wgpu/pull/3519)
`Instance::create_surface()` now returns `Result<Surface, CreateSurfaceError>` instead of `Surface`. This allows an error to be returned if the given window is a HTML canvas and obtaining a WebGPU or WebGL 2 context fails. (No other platforms currently report any errors through this path.) By @kpreid in [#3052](https://github.com/gfx-rs/wgpu/pull/3052/)
A new api, `Queue::copy_external_image_to_texture`, allows you to create wgpu textures from various web image primitives. Specificically from `HtmlVideoElement`, `HtmlCanvasElement`, `OffscreenCanvas`, and `ImageBitmap`. This provides multiple low-copy ways of interacting with the browser. WebGL is also supported, though WebGL has some additional restrictions, represented by the `UNRESTRICTED_EXTERNAL_IMAGE_COPIES` downlevel flag. By @cwfitzgerald in [#3288](https://github.com/gfx-rs/wgpu/pull/3288)
#### Instance creation now takes `InstanceDescriptor` instead of `Backends`
`Instance::new()` and `hub::Global::new()` now take an `InstanceDescriptor` struct which cointains both the existing `Backends` selection as well as a new `Dx12Compiler` field for selecting which Dx12 shader compiler to use.
```diff
- let instance = Instance::new(wgpu::Backends::all());
+ let instance = Instance::new(wgpu::InstanceDescriptor {
+ backends: wgpu::Backends::all(),
+ dx12_shader_compiler: wgpu::Dx12Compiler::Fxc,
+ });
```
`Instance` now also also implements `Default`, which uses `wgpu::Backends::all()` and `wgpu::Dx12Compiler::Fxc` for `InstanceDescriptor`
```diff
- let instance = Instance::new(wgpu::InstanceDescriptor {
- backends: wgpu::Backends::all(),
- dx12_shader_compiler: wgpu::Dx12Compiler::Fxc,
- });
+ let instance = Instance::default();
```
By @Elabajaba in [#3356](https://github.com/gfx-rs/wgpu/pull/3356)
The new `view_formats` field in the `TextureDescriptor` is used to specify a list of formats the texture can be re-interpreted to in a texture view. Currently only changing srgb-ness is allowed (ex. `Rgba8Unorm`<=> `Rgba8UnormSrgb`).
Via the `TEXTURE_ADAPTER_SPECIFIC_FORMAT_FEATURES` feature, MSAA x2 and x8 are now supported on textures. To query for x2 or x8 support, enable the feature and look at the texture format flags for the texture format of your choice.
By @39ali in [3140](https://github.com/gfx-rs/wgpu/pull/3140)
#### DXC Shader Compiler Support for DX12
You can now choose to use the DXC compiler for DX12 instead of FXC. The DXC compiler is faster, less buggy, and allows for new features compared to the old, unmaintained FXC compiler.
You can choose which compiler to use at `Instance` creation using the `dx12_shader_compiler` field in the `InstanceDescriptor` struct. Note that DXC requires both `dxcompiler.dll` and `dxil.dll`, which can be downloaded from https://github.com/microsoft/DirectXShaderCompiler/releases. Both .dlls need to be shipped with your application when targeting DX12 and using the `DXC` compiler. If the .dlls can't be loaded, then it will fall back to the FXC compiler. By @39ali and @Elabajaba in [#3356](https://github.com/gfx-rs/wgpu/pull/3356)
The DX12 backend can now suballocate buffers and textures from larger chunks of memory, which can give a significant increase in performance (in testing a 100x improvement has been seen in a simple scene with 200 `write_buffer` calls per frame, and a 1.4x improvement in [Bistro using Bevy](https://github.com/vleue/bevy_bistro_playground)).
Previously `wgpu-hal`'s DX12 backend created a new heap on the GPU every time you called `write_buffer` (by calling `CreateCommittedResource`), whereas now it uses [`gpu_allocator`](https://crates.io/crates/gpu-allocator) to manage GPU memory (and calls `CreatePlacedResource` with a suballocated heap). By @Elabajaba in [#3163](https://github.com/gfx-rs/wgpu/pull/3163)
#### Backend selection by features in wgpu-core
Whereas `wgpu-core` used to automatically select backends to enable
based on the target OS and architecture, it now has separate features
to enable each backend:
- "metal", for the Metal API on macOS and iOS
- "vulkan", for the Vulkan API (Linux, some Android, and occasionally Windows)
- "dx12", for Microsoft's Direct3D 12 API
- "gles", OpenGL ES, available on many systems
- "dx11", for Microsoft's Direct3D 11 API
None are enabled by default, but the `wgpu` crate automatically
selects these features based on the target operating system and
architecture, using the same rules that `wgpu-core` used to, so users
of `wgpu` should be unaffected by this change. However, other crates
using `wgpu-core` directly will need to copy `wgpu`'s logic or write
their own. See the `[target]` section of `wgpu/Cargo.toml` for
details.
Similarly, `wgpu-core` now has `emscripten` and `renderdoc` features
that `wgpu` enables on appropriate platforms.
In previous releases, the `wgpu-core` crate decided which backends to
support. However, this left `wgpu-core`'s users with no way to
override those choices. (Firefox doesn't want the GLES back end, for
example.) There doesn't seem to be any way to have a crate select
backends based on target OS and architecture that users of that crate
can still override. Default features can't be selected based on the
target, for example. That implies that we should do the selection as
late in the dependency DAG as feasible. Having `wgpu` (and
`wgpu-core`'s other dependents) choose backends seems like the best
option.
By @jimblandy in [#3254](https://github.com/gfx-rs/wgpu/pull/3254).
- New downlevel feature `UNRESTRICTED_INDEX_BUFFER` to indicate support for using `INDEX` together with other non-copy/map usages (unsupported on WebGL). By @Wumpf in [#3157](https://github.com/gfx-rs/wgpu/pull/3157)
- Combine `Surface::get_supported_formats`, `Surface::get_supported_present_modes`, and `Surface::get_supported_alpha_modes` into `Surface::get_capabilities` and `SurfaceCapabilities`. By @cwfitzgerald in [#3157](https://github.com/gfx-rs/wgpu/pull/3157)
- Lower the `max_buffer_size` limit value for compatibility with Apple2 and WebGPU compliance. By @jinleili in [#3255](https://github.com/gfx-rs/wgpu/pull/3255)
- Limits `min_uniform_buffer_offset_alignment` and `min_storage_buffer_offset_alignment` is now always at least 32. By @wumpf [#3262](https://github.com/gfx-rs/wgpu/pull/3262)
- Add validation in accordance with WebGPU `GPUSamplerDescriptor` valid usage for `lodMinClamp` and `lodMaxClamp`. By @James2022-rgb in [#3353](https://github.com/gfx-rs/wgpu/pull/3353)
- Remove panics in `Deref` implementations for `QueueWriteBufferView` and `BufferViewMut`. Instead, warnings are logged, since reading from these types is not recommended. By @botahamec in [#3336]
- Set `WEBGPU_TEXTURE_FORMAT_SUPPORT` downlevel flag depending on the proper format support by @teoxoy in [#3367](https://github.com/gfx-rs/wgpu/pull/3367).
- Set `COPY_SRC`/`COPY_DST` only based on Vulkan's `TRANSFER_SRC`/`TRANSFER_DST` by @teoxoy in [#3366](https://github.com/gfx-rs/wgpu/pull/3366).
- Add the `"wgsl"` feature, to enable WGSL shaders in `wgpu-core` and `wgpu`. Enabled by default in `wgpu`. By @daxpedda in [#2890](https://github.com/gfx-rs/wgpu/pull/2890).
- Add `get_default_config` for `Surface` to simplify user creation of `SurfaceConfiguration`. By @jinleili in [#3034](https://github.com/gfx-rs/wgpu/pull/3034)
- Native adapters can now use MSAA x2 and x8 if it's supported , previously only x1 and x4 were supported . By @39ali in [3140](https://github.com/gfx-rs/wgpu/pull/3140)
- Implemented correleation between user timestamps and platform specific presentation timestamps via [`Adapter::get_presentation_timestamp`]. By @cwfitzgerald in [#3240](https://github.com/gfx-rs/wgpu/pull/3240)
- Implemented `TextureFormat::Stencil8`, allowing for stencil testing without depth components. By @Dinnerbone in [#3343](https://github.com/gfx-rs/wgpu/pull/3343)
- Implemented `add_srgb_suffix()` for `TextureFormat` for converting linear formats to sRGB. By @Elabajaba in [#3419](https://github.com/gfx-rs/wgpu/pull/3419)
- Zero-initialize workgroup memory. By @teoxoy in [#3174](https://github.com/gfx-rs/wgpu/pull/3174)
- Surfaces support now `TextureFormat::Rgba8Unorm` and (non-web only) `TextureFormat::Bgra8Unorm`. By @Wumpf in [#3070](https://github.com/gfx-rs/wgpu/pull/3070)
- Add `MULTISAMPLE_X2`, `MULTISAMPLE_X4` and `MULTISAMPLE_X8` to `TextureFormatFeatureFlags`. By @39ali in [3140](https://github.com/gfx-rs/wgpu/pull/3140)
- Bother to free the `hal::Api::CommandBuffer` when a `wgpu_core::command::CommandEncoder` is dropped. By @jimblandy in [#3069](https://github.com/gfx-rs/wgpu/pull/3069).
- Fixed the mipmap example by adding the missing WRITE_TIMESTAMP_INSIDE_PASSES feature. By @Olaroll in [#3081](https://github.com/gfx-rs/wgpu/pull/3081).
- Remove `wgpu_types::Features::DEPTH24PLUS_STENCIL8`, making `wgpu::TextureFormat::Depth24PlusStencil8` available on all backends. By @Healthire in (#3151)[https://github.com/gfx-rs/wgpu/pull/3151]
- Update ash to 0.37.1+1.3.235 to fix CI breaking by changing a call to the deprecated `debug_utils_set_object_name()` function to `set_debug_utils_object_name()` by @elabajaba in [#3273](https://github.com/gfx-rs/wgpu/pull/3273)
- Document and improve extension detection. By @teoxoy in [#3327](https://github.com/gfx-rs/wgpu/pull/3327)
- Don't use a pointer to a local copy of a `PhysicalDeviceDriverProperties` struct after it has gone out of scope. In fact, don't make a local copy at all. Introduce a helper function for building `CStr`s from C character arrays, and remove some `unsafe` blocks. By @jimblandy in [#3076](https://github.com/gfx-rs/wgpu/pull/3076).
- Fix `depth16Unorm` formats by @teoxoy in [#3313](https://github.com/gfx-rs/wgpu/pull/3313)
- Don't re-use `GraphicsCommandList` when `close` or `reset` fails. By @xiaopengli89 in [#3204](https://github.com/gfx-rs/wgpu/pull/3204)
#### Metal
- Fix texture view creation with full-resource views when using an explicit `mip_level_count` or `array_layer_count`. By @cwfitzgerald in [#3323](https://github.com/gfx-rs/wgpu/pull/3323)
- Fixed WebGL not displaying srgb targets correctly if a non-screen filling viewport was previously set. By @Wumpf in [#3093](https://github.com/gfx-rs/wgpu/pull/3093)
- Fix a panic when creating a pipeline with opaque types other than samplers (images and atomic counters). By @James2022-rgb in [#3361](https://github.com/gfx-rs/wgpu/pull/3361)
- Make `wgpu::TextureFormat::Depth24PlusStencil8` available on all backends by making the feature unconditionally available and the feature unneeded to use the format. By @Healthire and @cwfitzgerald in [#3165](https://github.com/gfx-rs/wgpu/pull/3165)
- Add way to create gles hal textures from raw gl names to allow externally managed textures. By @i509VCB [#3046](https://github.com/gfx-rs/wgpu/pull/3046)
- Free `StagingBuffers` even when an error occurs in the operation that consumes them. By @jimblandy in [#2961](https://github.com/gfx-rs/wgpu/pull/2961)
- Fix compilation errors when using wgpu-core in isolation while targetting `wasm32-unknown-unknown` by @Seamooo in [#2922](https://github.com/gfx-rs/wgpu/pull/2922)
- When called in a web worker, `Context::init()` now uses `web_sys::WorkerGlobalContext` to create a `wgpu::Instance` instead of trying to access the unavailable `web_sys::Window` by @JolifantoBambla in [#2858](https://github.com/gfx-rs/wgpu/pull/2858)
- Changed wgpu-hal and wgpu-core implementation to pass RawDisplayHandle and RawWindowHandle as separate
parameters instead of passing an impl trait over both HasRawDisplayHandle and HasRawWindowHandle. By @i509VCB in [#3022](https://github.com/gfx-rs/wgpu/pull/3022)
- Changed `Instance::as_hal<A>` to just return an `Option<&A::Instance>` rather than taking a callback. By @jimb in [#2991](https://github.com/gfx-rs/wgpu/pull/2991)
- Add warning when using CompareFunction::\*Equal with vertex shader that is missing @invariant tag by @cwfitzgerald in [#2887](https://github.com/gfx-rs/wgpu/pull/2887)
- Update Winit to version 0.27 and raw-window-handle to 0.5 by @wyatt-herkamp in [#2918](https://github.com/gfx-rs/wgpu/pull/2918)
- Changed Naga variant in ShaderSource to `Cow<'static, Module>`, to allow loading global variables by @daxpedda in [#2903](https://github.com/gfx-rs/wgpu/pull/2903)
- Explain why `Adapter::as_hal` and `Device::as_hal` have to take callback functions. By @jimblandy in [#2992](https://github.com/gfx-rs/wgpu/pull/2992)
- Prefer `DeviceType::DiscreteGpu` over `DeviceType::Other` for `PowerPreference::LowPower` so Vulkan is preferred over OpenGL again by @Craig-Macomber in [#2853](https://github.com/gfx-rs/wgpu/pull/2853)
- Allow running `get_texture_format_features` on unsupported texture formats (returning no flags) by @cwfitzgerald in [#2856](https://github.com/gfx-rs/wgpu/pull/2856)
- Allow multi-sampled textures that are supported by the device but not WebGPU if `TEXTURE_ADAPTER_SPECIFIC_FORMAT_FEATURES` is enabled by @cwfitzgerald in [#2856](https://github.com/gfx-rs/wgpu/pull/2856)
-`get_texture_format_features` only lists the COPY\_\* usages if the adapter actually supports that usage by @cwfitzgerald in [#2856](https://github.com/gfx-rs/wgpu/pull/2856)
- Fix bind group / pipeline deduplication not taking into account RenderBundle execution resetting these values by @shoebe [#2867](https://github.com/gfx-rs/wgpu/pull/2867)
- Fix panics that occur when using `as_hal` functions when the hal generic type does not match the hub being looked up in by @i509VCB [#2871](https://github.com/gfx-rs/wgpu/pull/2871)
-`DownlevelCapabilities::default()` now returns the `ANISOTROPIC_FILTERING` flag set to true so DX12 lists `ANISOTROPIC_FILTERING` as true again by @cwfitzgerald in [#2851](https://github.com/gfx-rs/wgpu/pull/2851)
- Vulkan 1.0 drivers that support `VK_KHR_multiview` now properly report the `MULTIVIEW` feature as supported by @i509VCB in [#2934](https://github.com/gfx-rs/wgpu/pull/2934).
- Stop using `VkPhysicalDevice11Features` in Vulkan 1.1 which is confusingly provided in Vulkan 1.2 by @i509VCB in [#2934](https://github.com/gfx-rs/wgpu/pull/2934).
- Fix depth stencil texture format capability by @jinleili in [#2854](https://github.com/gfx-rs/wgpu/pull/2854)
-`get_texture_format_features` now only returns usages for formats it actually supports by @cwfitzgerald in [#2856](https://github.com/gfx-rs/wgpu/pull/2856)
- Allow access to the EGLDisplay and EGLContext pointer in Gles hal Adapter and Device by @i509VCB in [#2860](https://github.com/gfx-rs/wgpu/pull/2860)
- Update present_mode docs as most of them don't automatically fall back to Fifo anymore. by @Elabajaba in [#2855](https://github.com/gfx-rs/wgpu/pull/2855)
- Fix out of bounds access when surface texture is written to by multiple command buffers by @cwfitzgerald in [#2843](https://github.com/gfx-rs/wgpu/pull/2843)
#### GLES
- AutoNoVSync now correctly falls back to Fifo by @simbleau in [#2842](https://github.com/gfx-rs/wgpu/pull/2842)
- Fix GL_EXT_color_buffer_float detection on native by @cwfitzgerald in [#2843](https://github.com/gfx-rs/wgpu/pull/2843)
`Limits` has a new field, [`max_buffer_size`](https://docs.rs/wgpu/0.13.0/wgpu/struct.Limits.html#structfield.max_buffer_size) (not an issue if you don't define limits manually):
```diff
Limits {
// ...
+ max_buffer_size: 256 * 1024 * 1024, // adjust as you see fit
- Adapter and Instance as_hal functions by @i509VCB in [#2663](https://github.com/gfx-rs/wgpu/pull/2663)
- expose some underlying types in Vulkan hal by @i509VCB in [#2667](https://github.com/gfx-rs/wgpu/pull/2667)
- Add raw_device method for dx12, vulkan hal by @xiaopengli89 in [#2360](https://github.com/gfx-rs/wgpu/pull/2360)
- expose egl display in gles Instance hal by @i509VCB in [#2670](https://github.com/gfx-rs/wgpu/pull/2670)
- Add raw_adapter method for dx12 hal adapter by @xiaopengli89 in [#2714](https://github.com/gfx-rs/wgpu/pull/2714)
- Acquire texture: `Option<std::time::Duration>` timeouts by @rib in [#2724](https://github.com/gfx-rs/wgpu/pull/2724)
- expose vulkan physical device capabilities, enabled device extensions by @i509VCB in [#2688](https://github.com/gfx-rs/wgpu/pull/2688)
#### Emscripten
- feature: emscripten by @caiiiycuk in [#2422](https://github.com/gfx-rs/wgpu/pull/2422)
- feature = emscripten, compability fixes for wgpu-native by @caiiiycuk in [#2450](https://github.com/gfx-rs/wgpu/pull/2450)
### Changes
#### General
- Make ShaderSource #[non_exhaustive] by @fintelia in [#2312](https://github.com/gfx-rs/wgpu/pull/2312)
- Make `execute_bundles()` receive IntoIterator by @maku693 in [#2410](https://github.com/gfx-rs/wgpu/pull/2410)
- Raise `wgpu_hal::MAX_COLOR_TARGETS` to 8. by @jimblandy in [#2640](https://github.com/gfx-rs/wgpu/pull/2640)
- Rename dispatch -> dispatch_workgroups by @jinleili in [#2619](https://github.com/gfx-rs/wgpu/pull/2619)
- Update texture_create_view logic to match spec by @jinleili in [#2621](https://github.com/gfx-rs/wgpu/pull/2621)
- Move TEXTURE_COMPRESSION_ETC2 | ASTC_LDR to web section to match spec by @jinleili in [#2671](https://github.com/gfx-rs/wgpu/pull/2671)
- Check that all vertex outputs are consumed by the fragment shader by @cwfitzgerald in [#2704](https://github.com/gfx-rs/wgpu/pull/2704)
- Convert map_async from being async to being callback based by @cwfitzgerald in [#2698](https://github.com/gfx-rs/wgpu/pull/2698)
- Align the validation of Device::create_texture with the WebGPU spec by @nical in [#2759](https://github.com/gfx-rs/wgpu/pull/2759)
- Add InvalidGroupIndex validation at create_shader_module by @jinleili in [#2775](https://github.com/gfx-rs/wgpu/pull/2775)
- Rename MAX_COLOR_TARGETS to MAX_COLOR_ATTACHMENTS to match spec by @jinleili in [#2780](https://github.com/gfx-rs/wgpu/pull/2780)
- Change get_preferred_format to get_supported_formats by @stevenhuyn in [#2783](https://github.com/gfx-rs/wgpu/pull/2783)
- Restrict WriteTimestamp Inside Passes by @cwfitzgerald in [#2802](https://github.com/gfx-rs/wgpu/pull/2802)
- Flip span labels to work better with tools by @cwfitzgerald in [#2820](https://github.com/gfx-rs/wgpu/pull/2820)
#### Gles
- Make GLES DeviceType unknown by default by @PolyMeilex in [#2647](https://github.com/gfx-rs/wgpu/pull/2647)
#### Metal
- metal: check if in the main thread when calling `create_surface` by @jinleili in [#2736](https://github.com/gfx-rs/wgpu/pull/2736)
#### Hal
- limit binding sizes to i32 by @kvark in [#2363](https://github.com/gfx-rs/wgpu/pull/2363)
### Bug Fixes
#### General
- Fix trac(y/ing) compile issue by @cwfitzgerald in [#2333](https://github.com/gfx-rs/wgpu/pull/2333)
- Improve detection and validation of cubemap views by @kvark in [#2331](https://github.com/gfx-rs/wgpu/pull/2331)
- Don't create array layer trackers for 3D textures. by @ElectronicRU in [#2348](https://github.com/gfx-rs/wgpu/pull/2348)
- Limit 1D texture mips to 1 by @kvark in [#2374](https://github.com/gfx-rs/wgpu/pull/2374)
- Texture format MSAA capabilities by @kvark in [#2377](https://github.com/gfx-rs/wgpu/pull/2377)
- Fix write_buffer to surface texture @kvark in [#2385](https://github.com/gfx-rs/wgpu/pull/2385)
- Improve some error messages by @cwfitzgerald in [#2446](https://github.com/gfx-rs/wgpu/pull/2446)
- Don't recycle indices that reach EOL by @kvark in [#2462](https://github.com/gfx-rs/wgpu/pull/2462)
- Validated render usages for 3D textures by @kvark in [#2482](https://github.com/gfx-rs/wgpu/pull/2482)
- Wrap all validation logs with catch_unwinds by @cwfitzgerald in [#2511](https://github.com/gfx-rs/wgpu/pull/2511)
- Fix clippy lints by @a1phyr in [#2560](https://github.com/gfx-rs/wgpu/pull/2560)
- Free the raw device when `wgpu::Device` is dropped. by @jimblandy in [#2567](https://github.com/gfx-rs/wgpu/pull/2567)
- wgpu-core: Register new pipelines with device's tracker. by @jimblandy in [#2565](https://github.com/gfx-rs/wgpu/pull/2565)
- impl Debug for StagingBelt by @kpreid in [#2572](https://github.com/gfx-rs/wgpu/pull/2572)
- Use fully qualified syntax for some calls. by @jimblandy in [#2655](https://github.com/gfx-rs/wgpu/pull/2655)
- fix: panic in `Storage::get` by @SparkyPotato in [#2657](https://github.com/gfx-rs/wgpu/pull/2657)
- Report invalid pipelines in render bundles as errors, not panics. by @jimblandy in [#2666](https://github.com/gfx-rs/wgpu/pull/2666)
- Perform "valid to use with" checks when recording render bundles. by @jimblandy in [#2690](https://github.com/gfx-rs/wgpu/pull/2690)
- Stop using storage usage for sampling by @cwfitzgerald in [#2703](https://github.com/gfx-rs/wgpu/pull/2703)
- Track depth and stencil writability separately. by @jimblandy in [#2693](https://github.com/gfx-rs/wgpu/pull/2693)
- Improve InvalidScissorRect error message by @jinleili in [#2713](https://github.com/gfx-rs/wgpu/pull/2713)
- Improve InvalidViewport error message by @jinleili in [#2723](https://github.com/gfx-rs/wgpu/pull/2723)
- Don't dirty the vertex buffer for stride/rate changes on bundles. by @jimblandy in [#2744](https://github.com/gfx-rs/wgpu/pull/2744)
- Clean up render bundle index buffer tracking. by @jimblandy in [#2743](https://github.com/gfx-rs/wgpu/pull/2743)
- Improve read-write and read-only texture storage error message by @jinleili in [#2745](https://github.com/gfx-rs/wgpu/pull/2745)
- Change `WEBGPU_TEXTURE_FORMAT_SUPPORT` to `1 << 14` instead of `1 << 15` by @expenses in [#2772](https://github.com/gfx-rs/wgpu/pull/2772)
- fix BufferMapCallbackC & SubmittedWorkDoneClosureC by @rajveermalviya in [#2787](https://github.com/gfx-rs/wgpu/pull/2787)
- Fix formatting of `TextureDimensionError::LimitExceeded`. by @kpreid in [#2799](https://github.com/gfx-rs/wgpu/pull/2799)
- Remove redundant `#[cfg]` conditions from `backend/direct.rs`. by @jimblandy in [#2811](https://github.com/gfx-rs/wgpu/pull/2811)
- Replace android-properties with android_system_properties. by @nical in [#2815](https://github.com/gfx-rs/wgpu/pull/2815)
- Relax render pass color_attachments validation by @jinleili in [#2778](https://github.com/gfx-rs/wgpu/pull/2778)
- Properly Barrier Compute Indirect Buffers by @cwfitzgerald in [#2810](https://github.com/gfx-rs/wgpu/pull/2810)
- Use numeric constants to define `wgpu_types::Features` values. by @jimblandy in [#2817](https://github.com/gfx-rs/wgpu/pull/2817)
#### Metal
- Fix surface texture clear view by @kvark in [#2341](https://github.com/gfx-rs/wgpu/pull/2341)
- Set preserveInvariance for shader options by @scoopr in [#2372](https://github.com/gfx-rs/wgpu/pull/2372)
- Properly set msl version to 2.3 if supported by @cwfitzgerald in [#2418](https://github.com/gfx-rs/wgpu/pull/2418)
- Identify Apple M1 GPU as integrated by @superdump in [#2429](https://github.com/gfx-rs/wgpu/pull/2429)
- Fix M1 in macOS incorrectly reports supported compressed texture formats by @superdump in [#2453](https://github.com/gfx-rs/wgpu/pull/2453)
- Msl: support unsized array not in structures by @kvark in [#2459](https://github.com/gfx-rs/wgpu/pull/2459)
- Fix `Surface::from_uiview` can not guarantee set correct `contentScaleFactor` by @jinleili in [#2470](https://github.com/gfx-rs/wgpu/pull/2470)
- Set `max_buffer_size` by the correct physical device restriction by @jinleili in [#2502](https://github.com/gfx-rs/wgpu/pull/2502)
- Refactor `PrivateCapabilities` creation by @jinleili in [#2509](https://github.com/gfx-rs/wgpu/pull/2509)
- Refactor texture_format_capabilities function by @jinleili in [#2522](https://github.com/gfx-rs/wgpu/pull/2522)
- Improve `push | pop_debug_marker` by @jinleili in [#2537](https://github.com/gfx-rs/wgpu/pull/2537)
- Fix some supported limits by @jinleili in [#2608](https://github.com/gfx-rs/wgpu/pull/2608)
- Don't skip incomplete binding resources. by @dragostis in [#2622](https://github.com/gfx-rs/wgpu/pull/2622)
- Fix `Rgb9e5Ufloat` capabilities and `sampler_lod_average` support by @jinleili in [#2656](https://github.com/gfx-rs/wgpu/pull/2656)
- Fix Depth24Plus | Depth24PlusStencil8 capabilities by @jinleili in [#2686](https://github.com/gfx-rs/wgpu/pull/2686)
- Get_supported_formats: sort like the old get_preferred_format and simplify return type by @victorvde in [#2786](https://github.com/gfx-rs/wgpu/pull/2786)
- Restrict hal::TextureUses::COLOR_TARGET condition within create_texture by @jinleili in [#2818](https://github.com/gfx-rs/wgpu/pull/2818)
#### DX12
- Fix UMA check by @kvark in [#2305](https://github.com/gfx-rs/wgpu/pull/2305)
- Fix partial texture barrier not affecting stencil aspect by @Wumpf in [#2308](https://github.com/gfx-rs/wgpu/pull/2308)
- Improve RowPitch computation by @kvark in [#2409](https://github.com/gfx-rs/wgpu/pull/2409)
#### Vulkan
- Explicitly set Vulkan debug message types instead of !empty() by @victorvde in [#2321](https://github.com/gfx-rs/wgpu/pull/2321)
- Use stencil read/write masks by @kvark in [#2382](https://github.com/gfx-rs/wgpu/pull/2382)
- Vulkan: correctly set INDEPENDENT_BLEND，make runable on Android 8.x by @jinleili in [#2498](https://github.com/gfx-rs/wgpu/pull/2498)
- Fix ASTC format mapping by @kvark in [#2476](https://github.com/gfx-rs/wgpu/pull/2476)
- Support flipped Y on VK 1.1 devices by @cwfitzgerald in [#2512](https://github.com/gfx-rs/wgpu/pull/2512)
- Fixed builtin(primitive_index) for vulkan backend by @kwillemsen in [#2716](https://github.com/gfx-rs/wgpu/pull/2716)
- Fix PIPELINE_STATISTICS_QUERY feature support by @jinleili in [#2750](https://github.com/gfx-rs/wgpu/pull/2750)
- Add a vulkan workaround for large buffers. by @nical in [#2796](https://github.com/gfx-rs/wgpu/pull/2796)
#### GLES
- Fix index buffer state not being reset in reset_state by @rparrett in [#2391](https://github.com/gfx-rs/wgpu/pull/2391)
- Allow push constants trough emulation by @JCapucho in [#2400](https://github.com/gfx-rs/wgpu/pull/2400)
- Hal/gles: fix dirty vertex buffers that are unused by @kvark in [#2427](https://github.com/gfx-rs/wgpu/pull/2427)
- Fix texture description for bgra formats by @JCapucho in [#2520](https://github.com/gfx-rs/wgpu/pull/2520)
- Remove a `log::error!` debugging statement from the gles queue by @expenses in [#2630](https://github.com/gfx-rs/wgpu/pull/2630)
- Fix clearing depth and stencil at the same time by @expenses in [#2675](https://github.com/gfx-rs/wgpu/pull/2675)
- Handle cubemap copies by @expenses in [#2725](https://github.com/gfx-rs/wgpu/pull/2725)
- Allow clearing index buffers by @grovesNL in [#2740](https://github.com/gfx-rs/wgpu/pull/2740)
- Fix buffer-texture copy for 2d arrays by @tuchs in [#2809](https://github.com/gfx-rs/wgpu/pull/2809)
#### Wayland
- Search for different versions of libwayland by @sh7dm in [#2336](https://github.com/gfx-rs/wgpu/pull/2336)
#### WebGPU
- Fix compilation on wasm32-unknown-unknown without `webgl` feature by @jakobhellermann in [#2355](https://github.com/gfx-rs/wgpu/pull/2355)
- Solve crash on WebGPU by @cwfitzgerald in [#2807](https://github.com/gfx-rs/wgpu/pull/2807)
#### Emscripten
- Fix emscripten by @cwfitzgerald in [#2494](https://github.com/gfx-rs/wgpu/pull/2494)
### Performance
- Do texture init via clear passes when possible by @Wumpf in [#2307](https://github.com/gfx-rs/wgpu/pull/2307)
- Bind group deduplication by @cwfitzgerald in [#2623](https://github.com/gfx-rs/wgpu/pull/2623)
- Tracking Optimization and Rewrite by @cwfitzgerald in [#2662](https://github.com/gfx-rs/wgpu/pull/2662)
### Documentation
- Add defaults to new limits and correct older ones by @MultisampledNight in [#/2303](https://github.com/gfx-rs/wgpu/pull/2303)
- Improve shader source documentation by @grovesNL in [#2315](https://github.com/gfx-rs/wgpu/pull/2315)
- Fix typo by @rustui in [#2393](https://github.com/gfx-rs/wgpu/pull/2393)
- Add a :star: to the feature matrix of examples README by @yutannihilation in [#2457](https://github.com/gfx-rs/wgpu/pull/2457)
- Fix get_timestamp_period type in docs by @superdump in [#2478](https://github.com/gfx-rs/wgpu/pull/2478)
- Fix mistake in Access doc comment by @nical in [#2479](https://github.com/gfx-rs/wgpu/pull/2479)
- Improve shader support documentation by @cwfitzgerald in [#2501](https://github.com/gfx-rs/wgpu/pull/2501)
- Document the gfx_select! macro. by @jimblandy in [#2555](https://github.com/gfx-rs/wgpu/pull/2555)
- Add Windows 11 to section about DX12 by @HeavyRain266 in [#2552](https://github.com/gfx-rs/wgpu/pull/2552)
- Document some aspects of resource tracking. by @jimblandy in [#2558](https://github.com/gfx-rs/wgpu/pull/2558)
- Documentation for various things. by @jimblandy in [#2566](https://github.com/gfx-rs/wgpu/pull/2566)
- Fix doc links. by @jimblandy in [#2579](https://github.com/gfx-rs/wgpu/pull/2579)
- Fixed misspelling in documentation by @zenitopires in [#2634](https://github.com/gfx-rs/wgpu/pull/2634)
- Update push constant docs to reflect the API by @Noxime in [#2637](https://github.com/gfx-rs/wgpu/pull/2637)
- Exclude dependencies from documentation by @yutannihilation in [#2642](https://github.com/gfx-rs/wgpu/pull/2642)
- Document `GpuFuture`. by @jimblandy in [#2644](https://github.com/gfx-rs/wgpu/pull/2644)
- Document random bits and pieces. by @jimblandy in [#2651](https://github.com/gfx-rs/wgpu/pull/2651)
- Add cross-references to each wgpu type's documentation. by @kpreid in [#2653](https://github.com/gfx-rs/wgpu/pull/2653)
- RenderPassDescriptor: make label lifetime match doc, and make names descriptive. by @kpreid in [#2654](https://github.com/gfx-rs/wgpu/pull/2654)
- Document `VertexStepMode`. by @jimblandy in [#2685](https://github.com/gfx-rs/wgpu/pull/2685)
- Add links for SpirV documents. by @huandzh in [#2697](https://github.com/gfx-rs/wgpu/pull/2697)
- Add symlink LICENSE files into crates. by @dskkato in [#2604](https://github.com/gfx-rs/wgpu/pull/2604)
- Fix documentation links. by @jimblandy in [#2756](https://github.com/gfx-rs/wgpu/pull/2756)
- Improve push constant documentation, including internal docs. by @jimblandy in [#2764](https://github.com/gfx-rs/wgpu/pull/2764)
- Clarify docs for `wgpu_core`'s `Id` and `gfx_select!`. by @jimblandy in [#2766](https://github.com/gfx-rs/wgpu/pull/2766)
- Update the Supported Platforms table in README by @jinleili in [#2770](https://github.com/gfx-rs/wgpu/pull/2770)
- Remove depth image from readme - we don't dictate direction of depth by @cwfitzgerald in [#2812](https://github.com/gfx-rs/wgpu/pull/2812)
### Dependency Updates
- Update `ash` to `0.37` by @a1phyr in [#2557](https://github.com/gfx-rs/wgpu/pull/2557)
- Update parking_lot to 0.12. by @emilio in [#2639](https://github.com/gfx-rs/wgpu/pull/2639)
- Accept both parking-lot 0.11 and 0.12, to avoid windows-rs. by @jimblandy in [#2660](https://github.com/gfx-rs/wgpu/pull/2660)
- Update web-sys to 0.3.58, sparse attachments support by @jinleili in [#2813](https://github.com/gfx-rs/wgpu/pull/2813)
-`resolver = "2"` is now required in top-level cargo manifests
- Fixed:
-`Device::create_query_set` would return an error when creating exactly `QUERY_SET_MAX_QUERIES` (8192) queries. Now it only returns an error when trying to create _more_ than `QUERY_SET_MAX_QUERIES` queries.
