We've actually been doing the wrong thing this whole time, for v1 of the
protocol, we should set the refresh_nsec field to 0 if the output does
not have a constant refresh rate. However we've been setting it to the
fastest rate instead since eac7c2ad2f
which is incidentally exactly what v2 of the protocol proposes.
So allow advertising v2, and fix v1 to set refresh_nsec to 0.
When setting the primary buffer location for direct scanout, subtract
the offset of that output to put the buffer location in output-relative
coordinates.
Fixes#3910
Enable scene-tree direct scanout of a single buffer with various options
for scaling and source crop. This is intended to support direct scanout
for fullscreen video with/without scaling, letterboxing/pillarboxing
(e.g. 4:3 content on a 16:9 display), and source crop (e.g. when
1920x1088 planes are used for 1920x1080 video).
This works by explicitly specifying the source crop and destination box
for the primary buffer in the output state. DRM atomic and libliftoff
backends will turn this into a crop and scale of the plane (assuming the
hardware supports that). For the Wayland/X11/DRM-legacy backends I just
reject this so scanout will be disabled.
The previous behaviour is preserved if buffer_src_box and buffer_dst_box
are unset: the buffer is displayed at native size at the top-left of the
output with no crop.
The change to `struct wlr_output_state` makes this a binary breaking
change (but this works transparently for scene-tree compositors like
labwc after a recompile).
Since wlr_damage_ring now only works with buffer local coordinates, this
creates an inpedance mismatch for compositors that want to use this
function. Instead of compositors needing to the the conversion itself,
change thu function to take buffer local coordinates directly.
The output feature flag has a flaw: it's not possible to check
whether the backend supports timelines during compositor
initialization when we need to figure out whether we want to enable
the linux-drm-syncobj-v1 protocol.
Introduce a backend-wide feature flag to indicate support for
timelines to address this defect.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3904
This wasn't that great:
1. Now that damage ring tracks damage across actual wlr_buffer objects,
it can use the buffer size to do any sort of cropping that needs to
happen.
2. The damage ring size really should be the size of the transformed
size of the output. Compositors currently have to call
`wlr_damage_ring_set_bounds()` where it might not be clear when to
call the function. Compositors can just check against the actual
output bounds that they care about when processing the damage.
Fixes: #3891
A struct wlr_xdg_toplevel_configure is passed in with the whole
state. This makes it a lot clearer that the size and WM state are
always sent to the client.
It was completely wrong: according to the protocol, the effective
geometry is only updated on commit time if there pending state has
new state from xdg_surface.set_window_geometry or
xdg_surface.set_window_geometry has never been sent at all.
This commit adds wlr_xdg_surface.geometry which correctly matches the
effective window geometry and removes now-useless
wlr_xdg_surface_get_geometry().
It seems that some scene compositors want to avoid wlr_scene_output_commit
and use the lower lever wlr_scene_output_build_state. However, build
state does not early return if a frame is not needed so compositors will
implement the check themselves. Let's add a helper function that compositors
can use to implement the check.
Technically pending_commit_damage is a private interface, so this lets
compositors not interface with private interfaces to implement the check.
This commit removes extra wlr_xdg_toplevel_set_parent() calls,
simplifies wlr_surface->wlr_xdg_toplevel conversion logic, makes related
structures store wlr_xdg_toplevel objects directly instead of
wlr_surface objects, and improves the code style.
The infrastructure to read _NET_WM_WINDOW_TYPE already exists in wlroots
(it's used for example in wlr_xwayland_or_surface_wants_focus()). But
the window type isn't easily accessible to the compositor because the
atoms to compare against are private to xwm.c.
labwc has recently gone to a fair amount of effort (including opening a
whole new xcb connection) just to get the needed window type atoms:
a04b394e59
It seems much cleaner to add the remaining few (3) atoms to wlroots and
implement a shared function which can be used by any wlroots compositor.
v2: naming updates
Previously it was supplying a pointer to private struct wlr_xwm
which was useless for compositors. The wlr_xwayland pointer in
contrast does have a generic data field and thus can be used by
compositors to attach their own pointer.
Additionally change the return value from int to bool.
This is especially useful if the compositor wants to support X11
panels to control windows. Without the signal a compositor does
have to hook into the user_event_handler callback but that would
not change the _NET_SUPPORTED root window property.
In labwc, we have had trouble with XWayland windows using the Globally
Active input model (see wlr_xwayland_icccm_input_model()). Under
traditional X11, these windows do not expect to be given focus directly
by the window manager; rather, the WM sends them a WM_TAKE_FOCUS message
prompting the client to take focus voluntarily.
Currently, these clients are difficult to support with wlroots, because
wlr_xwayland_surface_activate() assumes the client window will always
accept the keyboard focus after being sent WM_TAKE_FOCUS. Some Globally
Active client windows (e.g. panels/toolbars) don't want to be focused.
It's useless at best to focus them, and might even make them misbehave.
Others do need keyboard focus to be functional -- and there doesn't seem
to be any reliable way to know this in advance.
Adding wlr_xwayland_surface_offer_focus() allows the compositor to send
WM_TAKE_FOCUS to a client window supporting it and then see whether the
client accepts or ignores the offer. If it accepts, the surface will emit
the focus_in signal notifying the compositor that it has received focus.
This is entirely opt-in. A compositor that doesn't want to use the new
function can continue to call wlr_xwayland_surface_activate() directly
just as before.
This swaps the argument order of wlr_surface_accepts_touch() and
wlr_surface_accepts_tablet_v2(), putting the wlr_surface argument first
as should be the case for functions namespaced with wlr_surface_*.
This will let compositors know if changing adaptive_sync state has any
chance of working. When false, then the current state is the only
supported state, including if adaptive_sync is currently enabled as is
the case for Wayland and X11 backends.
When true, changing state might succeed, but no guarantee is made. It
just indicates that the backend does not already know it to be
impossible.
Since wlroots almost always significantly breaks API each minor release,
allowing parallel installation of wlroots helps packagers deal with
programs that require conflicting versions of wlroots.
Closes: #3786
This has been introduced way back in
be297d9d14 but is never used anywhere.
If compositors want to save the old dimensions before reacting to a
fullscreen or maximize event they can just grab the sizes within their
event handlers instead.
Instead of having separate getters for shm formats and DMA-BUF
formats, use the same pattern as wlr_output_impl.get_primary_formats
with a single function which takes buffer caps as input.
The surface argument is only used to obtain a wlr_seat_client and
semantically makes no sense. The wl_touch.cancel event applies to all
touch points and all surfaces of a client.
I decided to make the functions accept a wlr_seat_client rather than a
wl_client as it is directly available in the wlr_touch_point struct and
simplifies the implementation.
This is worth doing despite wl_client_get_destroy_listener() incorrectly
accepting a mutable wl_client pointer since this lookup_client()
function will primarily be used with a wl_display_global_filter_func_t
which only provides a const wl_client pointer.
Work around this libwayland API wart in wlroots so compositors don't
have to.
I wish to use a allowlist of globals for my security context
implementation rather than a blocklist, which means I need access to
the wp_single_pixel_buffer_manager_v1 global in order to allowlist it.
I think using a allowlist will make it harder for me to accidentally
expose globals to a security context that were meant to be restricted.
I wish to use a allowlist of globals for my security context
implementation rather than a blocklist, which means I need access to
the ext_idle_notifier_v1 global in order to allowlist it.
I think using a allowlist will make it harder for me to accidentally
expose globals to a security context that were meant to be restricted.
