Remove `verbose_generic_activity_with_arg`
This removes `verbose_generic_activity_with_arg` and changes users to `generic_activity_with_arg`. This keeps the output of `-Z time` readable while these repeated events are still available with the self profiling mechanism.
This commit adds support for a `#[diagnostic::on_unimplemented]`
attribute with the following options:
* `message` to customize the primary error message
* `note` to add a customized note message to an error message
* `label` to customize the label part of the error message
Co-authored-by: León Orell Valerian Liehr <me@fmease.dev>
Co-authored-by: Michael Goulet <michael@errs.io>
interpret: change ABI-compat test to be type-based
This makes the test consistent across targets. Otherwise the chances are very high that ABI mismatches get accepted on x86_64 but still fail on many other targets with more complicated ABIs.
This implements (most of) the rules described in https://github.com/rust-lang/rust/pull/115476.
also handle 2 panics when dumping proof trees for the whole test suite
- need to actually tell the proof tree builder about overflow
- need to handle a recursion_limit of 0 :<
Enable incremental-relative-spans by default.
This was enabled on nightly in https://github.com/rust-lang/rust/pull/84762.
It has been a while, without obvious bugs. It's time to enable it by default for incremental runs.
The `Debug` impl for `Ty` just calls the `Display` impl for `Ty`. This
is surprising and annoying. In particular, it means `Debug` doesn't show
as much information as `Debug` for `TyKind` does. And `Debug` is used in
some user-facing error messages, which seems bad.
This commit changes the `Debug` impl for `Ty` to call the `Debug` impl
for `TyKind`. It also does a number of follow-up changes to preserve
existing output, many of which involve inserting
`with_no_trimmed_paths!` calls. It also adds `Display` impls for
`UserType` and `Canonical`.
Some tests have changes to expected output:
- Those that use the `rustc_abi(debug)` attribute.
- Those that use the `EMIT_MIR` annotation.
In each case the output is slightly uglier than before. This isn't
ideal, but it's pretty weird (particularly for the attribute) that the
output is using `Debug` in the first place. They're fairly obscure
attributes (I hadn't heard of them) so I'm not worried by this.
For `async-is-unwindsafe.stderr`, there is one line that now lacks a
full path. This is a consistency improvement, because all the other
mentions of `Context` in this test lack a path.
Avoid a `source_span` query when encoding Spans into query results
This avoids a `source_span` query when encoding `Span`s into query results. It's not sound to execute queries here as the query caches can be locked and the dep graph is no longer writable.
r? `@cjgillot`
Use `Freeze` for `SourceFile`
This uses the `Freeze` type in `SourceFile` to let accessing `external_src` and `lines` be lock-free.
Behavior of `add_external_src` is changed to set `ExternalSourceKind::AbsentErr` on a hash mismatch which matches the documentation. `ExternalSourceKind::Unneeded` was removed as it's unused.
Based on https://github.com/rust-lang/rust/pull/115401.
Don't suggest dereferencing to unsized type
Rudimentary check that the self type is Sized. I don't really like any of this diagnostics code -- it's really messy and also really prone to false positives and negatives, but oh well.
Fixes#115569
Print the path of a return-position impl trait in trait when `return_type_notation` is enabled
When we're printing a return-position impl trait in trait, we usually just print it like an opaque. This is *usually* fine, but can be confusing when using `return_type_notation`. Print the path of the method from where the RPITIT originates when this feature gate is enabled.
Implement refinement lint for RPITIT
Implements a lint that warns against accidentally refining an RPITIT in an implementation. This is not a hard error, and can be suppressed with `#[allow(refining_impl_trait)]`, since this behavior may be desirable -- the lint just serves as an acknowledgement from the impl author that they understand that the types they write in the implementation are an API guarantee.
This compares bounds syntactically, not semantically -- semantic implication is more difficult and essentially relies on adding the ability to keep the RPITIT hidden in the trait system so that things can be proven about the type that shows up in the impl without its own bounds leaking through, either via a new reveal mode or something else. This was experimentally implemented in #111931.
Somewhat opinionated choices:
1. Putting the lint behind `refining_impl_trait` rather than a blanket `refine` lint. This could be changed, but I like keeping the lint specialized to RPITITs so the explanation can be tailored to it.
2. This PR does not include the `#[refine]` attribute or the feature gate, since it's kind of orthogonal and can be added in a separate PR.
r? `@oli-obk`
Use a specialized varint + bitpacking scheme for DepGraph encoding
The previous scheme here uses leb128 to encode the edge tables that represent the incr comp dependency graph. The problem with that scheme is that leb128 has overhead for larger values, and generally relies on the distribution of encoded values being heavily skewed towards smaller values. That is definitely not the case for a dep node index, since they are handed out sequentially and the whole range is covered, the distribution is actually biased in the opposite direction: Most dep nodes are large.
This PR implements a different varint encoding scheme. Instead of applying varint encoding to individual dep node indices (which is extremely branchy) we now apply it per node.
While being built, each node now stores its edges in a `SmallVec` with a bit of extra logic to track the max value of each edge. Then we varint encode the whole batch. This is a gamble: We save on space by only claiming 2 bits per node instead of ~3 bits per edge which is a nice savings but needs to balance out with the space overhead that a single large index in a node with a lot of edges will encode unnecessary bytes in each of that node's edge indices.
Then, to keep the runtime overhead of this encoding scheme down we deserialize our indices by loading 4 bytes for each then masking off the bytes that are't ours. This is much less code and branches than leb128, but relies on having some readable bytes past the end of each edge list. We explicitly add such padding to the in-memory data during decoding. And we also do this decoding lazily, turning a dense on-disk encoding into a peak memory reduction.
Then we apply a bit-packing scheme; since in https://github.com/rust-lang/rust/pull/115391 we now have unused bits on `DepKind`, we use those unused bits (currently there are 7!) to store the 2 bits that we need for the byte width of the edges in each node, then use the remaining bits to store the length of the edge list, if it fits.
r? `@nnethercote`
Represent MIR composite debuginfo as projections instead of aggregates
Composite debuginfo for MIR is currently represented as
```
debug name => Type { projection1 => place1, projection2 => place2 };
```
ie. a single `VarDebugInfo` object with that name, and its value a `VarDebugInfoContents::Composite`.
This PR proposes to reverse the representation to be
```
debug name.projection1 => place1;
debug name.projection2 => place2;
```
ie. multiple `VarDebugInfo` objects with each their projection.
This simplifies the handling of composite debuginfo by the compiler by avoiding weird nesting.
Based on https://github.com/rust-lang/rust/pull/115139
Add `FreezeLock` type and use it to store `Definitions`
This adds a `FreezeLock` type which allows mutation using a lock until the value is frozen where it can be accessed lock-free. It's used to store `Definitions` in `Untracked` instead of a `RwLock`. Unlike the current scheme of leaking read guards this doesn't deadlock if definitions is written to after no mutation are expected.
Use relative positions inside a SourceFile.
This allows to remove the normalization of start positions for hashing, and simplify allocation of global address space.
cc `@Zoxc`
Encode DepKind as u16
The derived Encodable/Decodable impls serialize/deserialize as a varint, which results in a lot of code size around the encoding/decoding of these types which isn't justified: The full range of values here is rather small but doesn't quite fit in to a `u8`. Growing _all_ serialized `DepKind` to 2 bytes costs us on average 1% size in the incr comp dep graph, which I plan to recoup in https://github.com/rust-lang/rust/pull/110050 by taking advantage of the unused bits in all the serialized `DepKind`.
r? `@nnethercote`
Make `get_return_block()` return `Some` only for HIR nodes in body
Fixes#114918
The issue occurred while compiling the following input:
```rust
fn uwu() -> [(); { () }] {
loop {}
}
```
It was caused by the code below trying to suggest a missing return type which resulted in a const eval cycle: 1bd043098e/compiler/rustc_hir_typeck/src/fn_ctxt/suggestions.rs (L68-L75)
The root cause was `get_return_block()` returning an `Fn` node for a node in the return type (i.e. the second `()` in the return type `[(); { () }]` of the input) although it is supposed to do so only for nodes that lie in the body of the function and return `None` otherwise (at least as per my understanding).
The PR fixes the issue by fixing this behaviour of `get_return_block()`.
Remove conditional use of `Sharded` from query state
`Sharded` is already a zero cost abstraction, so it shouldn't affect the performance of the single thread compiler if LLVM does its job.
r? `@cjgillot`
Allow explicit `#[repr(Rust)]`
This is identical to no `repr()` at all. For `Rust, packed` and `Rust, align(x)`, it should be the same as no `Rust` at all (as, afaik, `#[repr(align(16))]` uses the Rust ABI.)
The main use case for this is being able to explicitly say "I want to use the Rust ABI" in very very rare circumstances where the first obvious choice would be the C ABI yet is undesirable, which is already possible with functions as `extern "Rust"`. This would be useful for silencing https://github.com/rust-lang/rust-clippy/pull/11253. It's also more consistent with `extern`.
The lack of this also tripped me up a bit when I was new to Rust, as I expected this to be possible.
Point at return type when it influences non-first `match` arm
When encountering code like
```rust
fn foo() -> i32 {
match 0 {
1 => return 0,
2 => "",
_ => 1,
}
}
```
Point at the return type and not at the prior arm, as that arm has type `!` which isn't influencing the arm corresponding to arm `2`.
Fix#78124.
Couple of global state and driver refactors
* Remove some unused global mutable state
* Remove a couple of unnecessary queries (both driver and `TyCtxt` queries)
* Remove an unnecessary use of `FxIndexMap`
When encountering code like
```rust
fn foo() -> i32 {
match 0 {
1 => return 0,
2 => "",
_ => 1,
}
}
```
Point at the return type and not at the prior arm, as that arm has type
`!` which isn't influencing the arm corresponding to arm `2`.
Fix#78124.
feat: `riscv-interrupt-{m,s}` calling conventions
Similar to prior support added for the mips430, avr, and x86 targets this change implements the rough equivalent of clang's [`__attribute__((interrupt))`][clang-attr] for riscv targets, enabling e.g.
```rust
static mut CNT: usize = 0;
pub extern "riscv-interrupt-m" fn isr_m() {
unsafe {
CNT += 1;
}
}
```
to produce highly effective assembly like:
```asm
pub extern "riscv-interrupt-m" fn isr_m() {
420003a0: 1141 addi sp,sp,-16
unsafe {
CNT += 1;
420003a2: c62a sw a0,12(sp)
420003a4: c42e sw a1,8(sp)
420003a6: 3fc80537 lui a0,0x3fc80
420003aa: 63c52583 lw a1,1596(a0) # 3fc8063c <_ZN12esp_riscv_rt3CNT17hcec3e3a214887d53E.0>
420003ae: 0585 addi a1,a1,1
420003b0: 62b52e23 sw a1,1596(a0)
}
}
420003b4: 4532 lw a0,12(sp)
420003b6: 45a2 lw a1,8(sp)
420003b8: 0141 addi sp,sp,16
420003ba: 30200073 mret
```
(disassembly via `riscv64-unknown-elf-objdump -C -S --disassemble ./esp32c3-hal/target/riscv32imc-unknown-none-elf/release/examples/gpio_interrupt`)
This outcome is superior to hand-coded interrupt routines which, lacking visibility into any non-assembly body of the interrupt handler, have to be very conservative and save the [entire CPU state to the stack frame][full-frame-save]. By instead asking LLVM to only save the registers that it uses, we defer the decision to the tool with the best context: it can more accurately account for the cost of spills if it knows that every additional register used is already at the cost of an implicit spill.
At the LLVM level, this is apparently [implemented by] marking every register as "[callee-save]," matching the semantics of an interrupt handler nicely (it has to leave the CPU state just as it found it after its `{m|s}ret`).
This approach is not suitable for every interrupt handler, as it makes no attempt to e.g. save the state in a user-accessible stack frame. For a full discussion of those challenges and tradeoffs, please refer to [the interrupt calling conventions RFC][rfc].
Inside rustc, this implementation differs from prior art because LLVM does not expose the "all-saved" function flavor as a calling convention directly, instead preferring to use an attribute that allows for differentiating between "machine-mode" and "superivsor-mode" interrupts.
Finally, some effort has been made to guide those who may not yet be aware of the differences between machine-mode and supervisor-mode interrupts as to why no `riscv-interrupt` calling convention is exposed through rustc, and similarly for why `riscv-interrupt-u` makes no appearance (as it would complicate future LLVM upgrades).
[clang-attr]: https://clang.llvm.org/docs/AttributeReference.html#interrupt-risc-v
[full-frame-save]: 9281af2ecf/src/lib.rs (L440-L469)
[implemented by]: b7fb2a3fec/llvm/lib/Target/RISCV/RISCVRegisterInfo.cpp (L61-L67)
[callee-save]: 973f1fe7a8/llvm/lib/Target/RISCV/RISCVCallingConv.td (L30-L37)
[rfc]: https://github.com/rust-lang/rfcs/pull/3246
Similar to prior support added for the mips430, avr, and x86 targets
this change implements the rough equivalent of clang's
[`__attribute__((interrupt))`][clang-attr] for riscv targets, enabling
e.g.
```rust
static mut CNT: usize = 0;
pub extern "riscv-interrupt-m" fn isr_m() {
unsafe {
CNT += 1;
}
}
```
to produce highly effective assembly like:
```asm
pub extern "riscv-interrupt-m" fn isr_m() {
420003a0: 1141 addi sp,sp,-16
unsafe {
CNT += 1;
420003a2: c62a sw a0,12(sp)
420003a4: c42e sw a1,8(sp)
420003a6: 3fc80537 lui a0,0x3fc80
420003aa: 63c52583 lw a1,1596(a0) # 3fc8063c <_ZN12esp_riscv_rt3CNT17hcec3e3a214887d53E.0>
420003ae: 0585 addi a1,a1,1
420003b0: 62b52e23 sw a1,1596(a0)
}
}
420003b4: 4532 lw a0,12(sp)
420003b6: 45a2 lw a1,8(sp)
420003b8: 0141 addi sp,sp,16
420003ba: 30200073 mret
```
(disassembly via `riscv64-unknown-elf-objdump -C -S --disassemble ./esp32c3-hal/target/riscv32imc-unknown-none-elf/release/examples/gpio_interrupt`)
This outcome is superior to hand-coded interrupt routines which, lacking
visibility into any non-assembly body of the interrupt handler, have to
be very conservative and save the [entire CPU state to the stack
frame][full-frame-save]. By instead asking LLVM to only save the
registers that it uses, we defer the decision to the tool with the best
context: it can more accurately account for the cost of spills if it
knows that every additional register used is already at the cost of an
implicit spill.
At the LLVM level, this is apparently [implemented by] marking every
register as "[callee-save]," matching the semantics of an interrupt
handler nicely (it has to leave the CPU state just as it found it after
its `{m|s}ret`).
This approach is not suitable for every interrupt handler, as it makes
no attempt to e.g. save the state in a user-accessible stack frame. For
a full discussion of those challenges and tradeoffs, please refer to
[the interrupt calling conventions RFC][rfc].
Inside rustc, this implementation differs from prior art because LLVM
does not expose the "all-saved" function flavor as a calling convention
directly, instead preferring to use an attribute that allows for
differentiating between "machine-mode" and "superivsor-mode" interrupts.
Finally, some effort has been made to guide those who may not yet be
aware of the differences between machine-mode and supervisor-mode
interrupts as to why no `riscv-interrupt` calling convention is exposed
through rustc, and similarly for why `riscv-interrupt-u` makes no
appearance (as it would complicate future LLVM upgrades).
[clang-attr]: https://clang.llvm.org/docs/AttributeReference.html#interrupt-risc-v
[full-frame-save]: 9281af2ecf/src/lib.rs (L440-L469)
[implemented by]: b7fb2a3fec/llvm/lib/Target/RISCV/RISCVRegisterInfo.cpp (L61-L67)
[callee-save]: 973f1fe7a8/llvm/lib/Target/RISCV/RISCVCallingConv.td (L30-L37)
[rfc]: https://github.com/rust-lang/rfcs/pull/3246
Map RPIT duplicated lifetimes back to fn captured lifetimes
Use the [`lifetime_mapping`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_hir/hir/struct.OpaqueTy.html#structfield.lifetime_mapping) to map an RPIT's captured lifetimes back to the early- or late-bound lifetimes from its parent function. We may be going thru several layers of mapping, since opaques can be nested, so we introduce `TyCtxt::map_rpit_lifetime_to_fn_lifetime` to loop through several opaques worth of mapping, and handle turning it into a `ty::Region` as well.
We can then use this instead of the identity substs for RPITs in `check_opaque_meets_bounds` to address #114285.
We can then also use `map_rpit_lifetime_to_fn_lifetime` to properly install bidirectional-outlives predicates for both RPITs and RPITITs. This addresses #114601.
I based this on #114574, but I don't actually know how much of that PR we still need, so some code may be redundant now... 🤷
---
Fixes#114597Fixes#114579Fixes#114285
Also fixes#114601, since it turns out we had other bugs with RPITITs and their duplicated lifetime params 😅.
Supersedes #114574
r? `@oli-obk`
Store the laziness of type aliases in their `DefKind`
Previously, we would treat paths referring to type aliases as *lazy* type aliases if the current crate had lazy type aliases enabled independently of whether the crate which the alias was defined in had the feature enabled or not.
With this PR, the laziness of a type alias depends on the crate it is defined in. This generally makes more sense to me especially if / once lazy type aliases become the default in a new edition and we need to think about *edition interoperability*:
Consider the hypothetical case where the dependency crate has an older edition (and thus eager type aliases), it exports a type alias with bounds & a where-clause (which are void but technically valid), the dependent crate has the latest edition (and thus lazy type aliases) and it uses that type alias. Arguably, the bounds should *not* be checked since at any time, the dependency crate should be allowed to change the bounds at will with a *non*-major version bump & without negatively affecting downstream crates.
As for the reverse case (dependency: lazy type aliases, dependent: eager type aliases), I guess it rules out anything from slight confusion to mild annoyance from upstream crate authors that would be caused by the compiler ignoring the bounds of their type aliases in downstream crates with older editions.
---
This fixes#114468 since before, my assumption that the type alias associated with a given weak projection was lazy (and therefore had its variances computed) did not necessarily hold in cross-crate scenarios (which [I kinda had a hunch about](https://github.com/rust-lang/rust/pull/114253#discussion_r1278608099)) as outlined above. Now it does hold.
`@rustbot` label F-lazy_type_alias
r? `@oli-obk`
Add documentation to has_deref
Documentation of `has_deref` needed some polish to be more clear about where it should be used and what's it's purpose.
cc https://github.com/rust-lang/rust/issues/114401
r? `@RalfJung`
Convert builtin "global" late lints to run per module
The compiler currently has 4 non-incremental lints:
1. `clashing_extern_declarations`;
2. `missing_debug_implementations`;
3. ~`unnameable_test_items`;~ changed by https://github.com/rust-lang/rust/pull/114414
4. `missing_docs`.
Non-incremental lints get reexecuted for each compilation, which is slow. Moreover, those lints are allow-by-default, so run for nothing most of the time. This PR attempts to make them more incremental-friendly.
`clashing_extern_declarations` is moved to a standalone query.
`missing_debug_implementation` can use `non_blanket_impls_for_ty` instead of recomputing it.
`missing_docs` is harder as it needs to track if there is a `doc(hidden)` module surrounding. I hack around this using the lint level engine. That's easy to implement and allows to re-enable the lint for a re-exported module, while a more proper solution would reuse the same device as `unnameable_test_items`.
update overflow handling in the new trait solver
implements https://hackmd.io/QY0dfEOgSNWwU4oiGnVRLw?view. I want to clean up this doc and add it to the rustc-dev-guide, but I think this PR is ready for merge as is, even without the dev-guide entry.
r? `@compiler-errors`
Rework upcasting confirmation to support upcasting to fewer projections in target bounds
This PR implements a modified trait upcasting algorithm that is resilient to changes in the number of associated types in the bounds of the source and target trait objects.
It does this by equating each bound of the target trait ref individually against the bounds of the source trait ref, rather than doing them all together by constructing a new trait object.
#### The new way we do trait upcasting confirmation
1. Equate the target trait object's principal trait ref with one of the supertraits of the source trait object's principal.
fdcab310b2/compiler/rustc_trait_selection/src/traits/select/mod.rs (L2509-L2525)
2. Make sure that every auto trait in the *target* trait object is present in the source trait ref's bounds.
fdcab310b2/compiler/rustc_trait_selection/src/traits/select/mod.rs (L2559-L2562)
3. For each projection in the *target* trait object, make sure there is exactly one projection that equates with it in the source trait ref's bound. If there is more than one, bail with ambiguity.
fdcab310b2/compiler/rustc_trait_selection/src/traits/select/mod.rs (L2526-L2557)
* Since there may be more than one that applies, we probe first to check that there is exactly one, then we equate it outside of a probe once we know that it's unique.
4. Make sure the lifetime of the source trait object outlives the lifetime of the target.
<details>
<summary>Meanwhile, this is how we used to do upcasting:</summary>
1. For each supertrait of the source trait object, take that supertrait, append the source object's projection bounds, and the *target* trait object's auto trait bounds, and make this into a new object type:
d12c6e947c/compiler/rustc_trait_selection/src/traits/select/confirmation.rs (L915-L929)
2. Then equate it with the target trait object:
d12c6e947c/compiler/rustc_trait_selection/src/traits/select/confirmation.rs (L936)
This will be a type mismatch if the target trait object has fewer projection bounds, since we compare the bounds structurally in relate:
d12c6e947c/compiler/rustc_middle/src/ty/relate.rs (L696-L698)
</details>
Fixes#114035
Also fixes#114113, because I added a normalize call in the old solver.
r? types
resolve before canonicalization in new solver, ICE if unresolved
Fold the values with a resolver before canonicalization instead of making it happen within canonicalization.
This allows us to filter trivial region constraints from the external constraints.
r? ``@lcnr``
Perform OpaqueCast field projection on HIR, too.
fixes#105819
This is necessary for closure captures in 2021 edition, as they capture individual fields, not the full mentioned variables. So it may try to capture a field of an opaque (because the hidden type is known to be something with a field).
See https://github.com/rust-lang/rust/pull/99806 for when and why we added OpaqueCast to MIR.
Add `internal_features` lint
Implements https://github.com/rust-lang/compiler-team/issues/596
Also requires some more test blessing for codegen tests etc
`@jyn514` had the idea of just `allow`ing the lint by default in the test suite. I'm not sure whether this is a good idea, but it's definitely one worth considering. Additional input encouraged.
const validation: point at where we found a pointer but expected an integer
Instead of validation just printing "unable to turn pointer into bytes", make this a regular validation error that says where in the value the bad pointer was found. Also distinguish "expected integer, got pointer" from "expected pointer, got partial pointer or mix of pointers".
To avoid duplicating things too much I refactored the diagnostics for validity a bit, so that "got uninit, expected X" and "got pointer, expected X" can share the "X" part. Also all the errors emitted for validation are now grouped under `const_eval_validation` so that they are in a single group in the ftl file.
r? `@oli-obk`
It lints against features that are inteded to be internal to the
compiler and standard library. Implements MCP #596.
We allow `internal_features` in the standard library and compiler as those
use many features and this _is_ the standard library from the "internal to the compiler and
standard library" after all.
Marking some features as internal wasn't exactly the most scientific approach, I just marked some
mostly obvious features. While there is a categorization in the macro,
it's not very well upheld (should probably be fixed in another PR).
We always pass `-Ainternal_features` in the testsuite
About 400 UI tests and several other tests use internal features.
Instead of throwing the attribute on each one, just always allow them.
There's nothing wrong with testing internal features^^
Miri: fix error on dangling pointer inbounds offset
We used to claim that the pointer was "dereferenced", but that is just not true.
Can be reviewed commit-by-commit. The first commit is an unrelated rename that didn't seem worth splitting into its own PR.
r? `@oli-obk`
Don't check unnecessarily that impl trait is RPIT
We have this random `return_type_impl_trait` function to detect if a function returns an RPIT which is used in outlives suggestions, but removing it doesn't actually change any diagnostics. Let's just remove it.
Also, suppress a spurious outlives error from a ReError.
Fixes#114274
Operand types are now tracked explicitly, so there is no need to reserve ID 0
for the special always-zero counter.
As part of the renumbering, this change fixes an off-by-one error in the way
counters were counted by the `coverageinfo` query. As a result, functions
should now have exactly the number of counters they actually need, instead of
always having an extra counter that is never used.
Operand types are now tracked explicitly, so there is no need for expression
IDs to avoid counter IDs by descending from `u32::MAX`. Instead they can just
count up from 0, and can be used directly as indices when necessary.
Because the three kinds of operand are now distinguished explicitly, we no
longer need fiddly code to disambiguate counter IDs and expression IDs based on
the total number of counters/expressions in a function.
This does increase the size of operands from 4 bytes to 8 bytes, but that
shouldn't be a big deal since they are mostly stored inside boxed structures,
and the current coverage code is not particularly size-optimized anyway.
The actual motivation here is to prevent `rustfmt` from suddenly reformatting
these enum variants onto a single line, when they become slightly shorter in
the future.
But there's no harm in adding some helpful documentation at the same time.
Map RPITIT's opaque type bounds back from projections to opaques
An RPITIT in a program's AST is eventually translated into both a projection GAT and an opaque. The opaque is used for default trait methods, like:
```
trait Foo {
fn bar() -> impl Sized { 0i32 }
}
```
The item bounds for both the projection and opaque are identical, and both have a *projection* self ty. This is mostly okay, since we can normalize this projection within the default trait method body to the opaque, but it does two things:
1. it leads to bugs in places where we don't normalize item bounds, like `deduce_future_output_from_obligations`
2. it leads to extra match arms that are both suspicious looking and also easy to miss
This PR maps the opaque type bounds of the RPITIT's *opaque* back to the opaque's self type to avoid this quirk. Then we can fix the UI test for #108304 (1.) and also remove a bunch of match arms (2.).
Fixes#108304
r? `@spastorino`
Rollup of 7 pull requests
Successful merges:
- #114099 (privacy: no nominal visibility for assoc fns )
- #114128 (When flushing delayed span bugs, write to the ICE dump file even if it doesn't exist)
- #114138 (Adjust spans correctly for fn -> method suggestion)
- #114146 (Skip reporting item name when checking RPITIT GAT's associated type bounds hold)
- #114147 (Insert RPITITs that were shadowed by missing ADTs that resolve to [type error])
- #114155 (Replace a lazy `RefCell<Option<T>>` with `OnceCell<T>`)
- #114164 (Add regression test for `--cap-lints allow` and trait bounds warning)
r? `@ghost`
`@rustbot` modify labels: rollup
When `staged_api` is enabled, effective visibilities are computed earlier
and this can trigger an ICE in some cases.
In particular, if a impl of a trait method has a visibility then an error
will be reported for that, but when privacy invariants are being checked,
the effective visibility will still be greater than the nominal visbility
and that will trigger a `span_bug!`.
However, this invariant - that effective visibilites are limited to
nominal visibility - doesn't make sense for associated functions.
Signed-off-by: David Wood <david@davidtw.co>
new unstable option: -Zwrite-long-types-to-disk
This option guards the logic of writing long type names in files and instead using short forms in error messages in rustc_middle/ty/error behind a flag. The main motivation for this change is to disable this behaviour when running ui tests.
This logic can be triggered by running tests in a directory that has a long enough path, e.g. /my/very-long-path/where/rust-codebase/exists/
This means ui tests can fail depending on how long the path to their file is.
Some ui tests actually rely on this behaviour for their assertions, so for those we enable the flag manually.
Normalize the RHS of an `Unsize` goal in the new solver
`Unsize` goals are... tricky. Not only do they structurally match on their self type, but they're also structural on their other type parameter. I'm pretty certain that it is both incomplete and also just plain undesirable to not consider normalizing the RHS of an unsize goal. More practically, I'd like for this code to work:
```rust
trait A {}
trait B: A {}
impl A for usize {}
impl B for usize {}
trait Mirror {
type Assoc: ?Sized;
}
impl<T: ?Sized> Mirror for T {
type Assoc = T;
}
fn main() {
// usize: Unsize<dyn B>
let x = Box::new(1usize) as Box<<dyn B as Mirror>::Assoc>;
// dyn A: Unsize<dyn B>
let y = x as Box<<dyn A as Mirror>::Assoc>;
}
```
---
In order to achieve this, we add `EvalCtxt::normalize_non_self_ty` (naming modulo bikeshedding), which *must* be used for all non-self type arguments that are structurally matched in candidate assembly. Currently this is only necessary for `Unsize`'s argument, but I could see future traits requiring this (hopefully rarely) in the future. It uses `repeat_while_none` to limit infinite looping, and normalizes the self type until it is no longer an alias.
Also, we need to fix feature gate detection for `trait_upcasting` and `unsized_tuple_coercion` when HIR typeck has unnormalized types. We can do that by checking the `ImplSource` returned by selection, which necessitates adding a new impl source for tuple upcasting.
interpret: Unify projections for MPlaceTy, PlaceTy, OpTy
For ~forever, we didn't really have proper shared code for handling projections into those three types. This is mostly because `PlaceTy` projections require `&mut self`: they might have to `force_allocate` to be able to represent a project part-way into a local.
This PR finally fixes that, by enhancing `Place::Local` with an `offset` so that such an optimized place can point into a part of a place without having requiring an in-memory representation. If we later write to that place, we will still do `force_allocate` -- for now we don't have an optimized path in `write_immediate` that would avoid allocation for partial overwrites of immediately stored locals. But in `write_immediate` we have `&mut self` so at least this no longer pollutes all our type signatures.
(Ironically, I seem to distantly remember that many years ago, `Place::Local` *did* have an `offset`, and I removed it to simplify things. I guess I didn't realize why it was so useful... I am also not sure if this was actually used to achieve place projection on `&self` back then.)
The `offset` had type `Option<Size>`, where `None` represent "no projection was applied". This is needed because locals *can* be unsized (when they are arguments) but `Place::Local` cannot store metadata: if the offset is `None`, this refers to the entire local, so we can use the metadata of the local itself (which must be indirect); if a projection gets applied, since the local is indirect, it will turn into a `Place::Ptr`. (Note that even for indirect locals we can have `Place::Local`: when the local appears in MIR, we always start with `Place::Local`, and only check `frame.locals` later. We could eagerly normalize to `Place::Ptr` but I don't think that would actually simplify things much.)
Having done all that, we can finally properly abstract projections: we have a new `Projectable` trait that has the basic methods required for projecting, and then all projection methods are implemented for anything that implements that trait. We can even implement it for `ImmTy`! (Not that we need that, but it seems neat.) The visitor can be greatly simplified; it doesn't need its own trait any more but it can use the `Projectable` trait. We also don't need the separate `Mut` visitor any more; that was required only to reflect that projections on `PlaceTy` needed `&mut self`.
It is possible that there are some more `&mut self` that can now become `&self`... I guess we'll notice that over time.
r? `@oli-obk`
This is necessary for closure captures in 2021 edition, as they capture individual fields, not the full mentioned variables. So it may try to capture a field of an opaque (because the hidden type is known to be something with a field).
rustdoc: handle cross-crate RPITITs correctly
Filter out the internal associated types synthesized during the desugaring of RPITITs, they really shouldn't show up in the docs.
This also fixes#113929 since we're no longer invoking `is_impossible_associated_item` (renamed from `is_impossible_method`) which cannot handle them (leading to an ICE). I don't think it makes sense to try to make `is_impossible_associated_item` handle this exotic kind of associated type (CC original author `@compiler-errors).`
@ T-rustdoc reviewers, currently I'm throwing out ITIT assoc tys before cleaning assoc tys at each usage-site. I'm thinking about making `clean_middle_assoc_item` return an `Option<_>` instead and doing the check inside of it to prevent any call sites from forgetting the check for ITITs. Since I wasn't sure if you would like that approach, I didn't go through with it. Let me know what you think.
<details><summary>Explanation on why <code>is_impossible_associated_item(itit_assoc_ty)</code> leads to an ICE</summary>
Given the following code:
```rs
pub trait Trait { fn def<T>() -> impl Default {} }
impl Trait for () {}
```
The generated associated type looks something like (simplified):
```rs
type {opaque#0}<T>: Default = impl Default; // the name is actually `kw::Empty` but this is the `def_path_str` repr
```
The query `is_impossible_associated_item` goes through all predicates of the associated item – in this case `<T as Sized>` – to check if they contain any generic parameters from the (generic) associated type itself. For predicates that don't contain any *own* generics, it does further processing, part of which is instantiating the predicate with the generic arguments of the impl block (which is only correct if they truly don't contain any own generics since they wouldn't get instantiated this way leading to an ICE).
It checks if `parent_def_id(T) == assoc_ty_def_id` to get to know if `T` is owned by the assoc ty. Unfortunately this doesn't work for ITIT assoc tys. In this case, the parent of `T` is `Trait::def` (!) which is the associated function (I'm pretty sure this is very intentional) which is of course not equal to the assoc ty `Trait::{opaque#0}`.
</details>
`@rustbot` label A-cross-crate-reexports
This option guards the logic of writing long type names in files and
instead using short forms in error messages in rustc_middle/ty/error
behind a flag. The main motivation for this change is to disable this
behaviour when running ui tests.
This logic can be triggered by running tests in a directory that has a
long enough path, e.g. /my/very-long-path/where/rust-codebase/exists/
This means ui tests can fail depending on how long the path to their
file is.
Some ui tests actually rely on this behaviour for their assertions,
so for those we enable the flag manually.
Rollup of 4 pull requests
Successful merges:
- #113887 (new solver: add a separate cache for coherence)
- #113910 (Add FnPtr ty to SMIR)
- #113913 (error/E0691: include alignment in error message)
- #113914 (rustc_target: drop duplicate code)
r? `@ghost`
`@rustbot` modify labels: rollup
Still more complexity, but this allows computing exact `NaiveLayout`s
for null-optimized enums, and thus allows calls like
`transmute::<Option<&T>, &U>()` to work in generic contexts.
THis significantly complicates `NaiveLayout` logic, but is necessary to
ensure that bounds like `NonNull<T>: PointerLike` hold in generic
contexts.
Also implement exact layout computation for structs.
Querify unused trait check.
This code transitively loads information for all bodies, and from resolutions. As it does not return a value, it should be beneficial to have it as a query.
Don't translate compiler-internal bug messages
These are not very useful to be translated, as
* translators would get really weird and bad english versions to start out from,
* compiler devs have to do some work for what is supposed to be dead code and just a sanity check,
* the target audience is other compiler devs.
r? `@davidtwco`
Make it clearer that edition functions are `>=`, not `==`
r? `@Nilstrieb`
We could also perhaps derive `Ord` on `Edition` and use comparison operators.
Add the `no-builtins` attribute to functions when `no_builtins` is applied at the crate level.
**When `no_builtins` is applied at the crate level, we should add the `no-builtins` attribute to each function to ensure it takes effect in LTO.**
This is also the reason why no_builtins does not take effect in LTO as mentioned in #35540.
Now, `#![no_builtins]` should be similar to `-fno-builtin` in clang/gcc, see https://clang.godbolt.org/z/z4j6Wsod5.
Next, we should make `#![no_builtins]` participate in LTO again. That makes sense, as LTO also takes into consideration function-level instruction optimizations, such as the MachineOutliner. More importantly, when a user writes a large `#![no_builtins]` crate, they would like this crate to participate in LTO as well.
We should also add a function-level no_builtins attribute to allow users to have more control over it. This is similar to Clang's `__attribute__((no_builtin))` feature, see https://clang.godbolt.org/z/Wod6KK6eq. Before implementing this feature, maybe we should discuss whether to support more fine-grained control, such as `__attribute__((no_builtin("memcpy")))`.
Related discussions:
- #109821
- #35540
Next (a separate pull request?):
- [ ] Revert #35637
- [ ] Add a function-level `no_builtin` attribute?
Safe Transmute: Fix ICE (due to UnevaluatedConst)
This patch updates the code that looks at the `Assume` type when evaluating if transmutation is possible. An ICE was being triggered in the case that the `Assume` parameter contained an unevaluated const (in this test case, due to a function with missing parameter names).
Fixes#110892
This patch updates the code that looks at the `Assume` type when evaluating if
transmutation is possible. An ICE was being triggered in the case that the
`Assume` parameter contained an unevaluated const (in this test case, due to a
function with missing parameter names).
Fixes#110892
Use u64 for incr comp allocation offsets
Fixes https://github.com/rust-lang/rust/issues/76037
Fixes https://github.com/rust-lang/rust/issues/95780
Fixes https://github.com/rust-lang/rust/issues/111613
These issues are all reporting ICEs caused by using `u32` to store offsets to allocations in the incremental compilation cache. This PR aims to lift that limitation by changing the offset type in question to `u64`.
There are two perf runs in this PR. The first reports a regression, and the second does not. The changes are the same in both. I rebased the PR then did the second perf run because I noticed that the primary regression in it was very commonly seen in spurious regression reports.
I do not know what the perf run will report when this is merged. I would not be surprised to see regression or neutral, but the cachegrind diffs for the regression point at `try_mark_previous_green` which is a common source of inexplicable regressions and I don't think should be perturbed by this PR.
I'm not opposed to adding a regression test such as
```rust
fn main() {
println!("{}", [37; 1 << 30].len());
}
```
But that program takes 1 minute to compile and consumes 4.6 GB of memory then writes that much to disk. Is that a concerning amount of resource use for a test?
r? `@nnethercote`
Streamline size estimates (take 2)
This was merged in #113684 but then [something happened](https://github.com/rust-lang/rust/pull/113684#issuecomment-1636811985):
> There has been a bors issue that lead to the merge commit of this PR getting purged from master.
> You'll have to make a new PR to reapply it.
So this is exactly the same changes.
`@bors` r=wesleywiser
Add support for inherent projections in new solver
Not hard to support these, and it cuts out a really big chunk of failing UI tests with `--compare-mode=next-solver`
r? `@lcnr` (feel free to reassign, anyone can review this)
This means we call `MonoItem::size_estimate` (which involves a query)
less often: just once per mono item, and then once more per inline item
placement. After that we can reuse the stored value as necessary. This
means `CodegenUnit::compute_size_estimate` is cheaper.
Resurrect: rustc_target: Add alignment to indirectly-passed by-value types, correcting the alignment of byval on x86 in the process.
Same as #111551, which I [accidentally closed](https://github.com/rust-lang/rust/pull/111551#issuecomment-1571222612) :/
---
This resurrects PR #103830, which has sat idle for a while.
Beyond #103830, this also:
- fixes byval alignment for types containing vectors on Darwin (see `tests/codegen/align-byval-vector.rs`)
- fixes byval alignment for overaligned types on x86 Windows (see `tests/codegen/align-byval.rs`)
- fixes ABI for types with 128bit requested alignment on ARM64 Linux (see `tests/codegen/aarch64-struct-align-128.rs`)
r? `@nikic`
---
`@pcwalton's` original PR description is reproduced below:
Commit 88e4d2c from five years ago removed
support for alignment on indirectly-passed arguments because of problems with
the `i686-pc-windows-msvc` target. Unfortunately, the `memcpy` optimizations I
recently added to LLVM 16 depend on this to forward `memcpy`s. This commit
attempts to fix the problems with `byval` parameters on that target and now
correctly adds the `align` attribute.
The problem is summarized in [this comment] by `@eddyb.` Briefly, 32-bit x86 has
special alignment rules for `byval` parameters: for the most part, their
alignment is forced to 4. This is not well-documented anywhere but in the Clang
source. I looked at the logic in Clang `TargetInfo.cpp` and tried to replicate
it here. The relevant methods in that file are
`X86_32ABIInfo::getIndirectResult()` and
`X86_32ABIInfo::getTypeStackAlignInBytes()`. The `align` parameter attribute
for `byval` parameters in LLVM must match the platform ABI, or miscompilations
will occur. Note that this doesn't use the approach suggested by eddyb, because
I felt it was overkill to store the alignment in `on_stack` when special
handling is really only needed for 32-bit x86.
As a side effect, this should fix#80127, because it will make the `align`
parameter attribute for `byval` parameters match the platform ABI on LLVM
x86-64.
[this comment]: #80822 (comment)
Make it clearer that we're just checking for an RPITIT
Tiny nit to use `is_impl_trait_in_trait` more, to make it clearer that we're just checking whether a def-id is an RPITIT, rather than doing something meaningful with the `opt_rpitit_info`.
r? `@spastorino`
Use maybe_body_owned_by for multiple suggestions
This is a continued work from https://github.com/rust-lang/rust/pull/113567
We have several other suggestions not working for closure, this PR use `maybe_body_owned_by` to fix them and add test cases for them.
Add a cache for `maybe_lint_level_root_bounded`
`maybe_lint_level_root_bounded` is called many times and traces node sub-paths many times. This PR adds a cache that lets many of these tracings be skipped, avoiding lots of calls to functions like `Map::attrs` and `Map::parent_id`.
r? `@cjgillot`
refactor proof tree formatting
mostly:
- handle indentation via a separate formatter
- change nested to use a closure
tested it after rebasing on top of #113536 and everything looks good.
r? `````@BoxyUwU`````
miri: protect Move() function arguments during the call
This gives `Move` operands a meaning specific to function calls:
- for the duration of the call, the place the operand comes from is protected, making all read and write accesses insta-UB.
- the contents of that place are reset to `Uninit`, so looking at them again after the function returns, we cannot observe their contents
Turns out we can replace the existing "retag return place" hack with the exact same sort of protection on the return place, which is nicely symmetric.
Fixes https://github.com/rust-lang/rust/issues/112564
Fixes https://github.com/rust-lang/miri/issues/2927
This starts with a Miri rustc-push, since we'd otherwise conflict with a PR that recently landed in Miri.
(The "miri tree borrows" commit is an unrelated cleanup I noticed while doing the PR. I can remove it if you prefer.)
r? `@oli-obk`
Introduce `trait DebugWithInfcx` to debug format types with universe info
Seeing universes of infer vars is valuable for debugging but currently we have no way of easily debug formatting a type with the universes of all the infer vars shown. In the future I hope to augment the new solver's proof tree output with a `DebugWithInfcx` impl so that it can show universes but I left that out of this PR as it would be non trivial and this is already large and complex enough.
The goal here is to make the various abstractions taking `T: Debug` able to use the codepath for printing out universes, that way we can do `debug!("{:?}", my_x)` and have `my_x` have universes shown, same for the `write!` macro. It's not possible to put the `Infcx: InferCtxtLike<I>` into the formatter argument to `Debug::fmt` so it has to go into the self ty. For this we introduce the type `OptWithInfcx<I: Interner, Infcx: InferCtxtLike<I>, T>` which has the data `T` optionally coupled with the infcx (more on why it's optional later).
Because of coherence/orphan rules it's not possible to write the impl `Debug for OptWithInfcx<..., MyType>` when `OptWithInfcx` is in a upstream crate. This necessitates a blanket impl in the crate defining `OptWithInfcx` like so: `impl<T: DebugWithInfcx> Debug for OptWithInfcx<..., T>`. It is not intended for people to manually call `DebugWithInfcx::fmt`, the `Debug` impl for `OptWithInfcx` should be preferred.
The infcx has to be optional in `OptWithInfcx` as otherwise we would end up with a large amount of code duplication. Almost all types that want to be used with `OptWithInfcx` do not themselves need access to the infcx so if we were to not optional we would end up with large `Debug` and `DebugWithInfcx` impls that were practically identical other than that when formatting their fields we wrap the field in `OptWithInfcx` instead of formatting it alone.
The only types that need access to the infcx themselves are ty/const/region infer vars, everything else is implemented by having the `Debug` impl defer to `OptWithInfcx` with no infcx available. The `DebugWithInfcx` impl is pretty much just the standard `Debug` impl except that instead of recursively formatting fields with `write!(f, "{x:?}")` we must do `write!(f, "{:?}", opt_infcx.wrap(x))`. This is some pretty rough boilerplate but I could not think of an alternative unfortunately.
`OptWithInfcx::wrap` is an eager `Option::map` because 99% of callsites were discarding the existing data in `OptWithInfcx` and did not need lazy evaluation.
A trait `InferCtxtLike` was added instead of using `InferCtxt<'tcx>` as we need to implement `DebugWithInfcx` for types living in `rustc_type_ir` which are generic over an interner and do not have access to `InferCtxt` since it lives in `rustc_infer`. Additionally I suspect that adding universe info to new solver proof tree output will require an implementation of `InferCtxtLike` for something that is not an `InferCtxt` although this is not the primary motivaton.
---
To summarize:
- There is a type `OptWithInfcx` which bundles some data optionally with an infcx with allows us to pass an infcx into a `Debug` impl. It's optional instead of being there unconditionally so that we can share code for `Debug` and `DebugWithInfcx` impls that don't care about whether there is an infcx available but have fields that might care.
- There is a trait `DebugWithInfcx` which allows downstream crates to add impls of the form `Debug for OptWithInfcx<...>` which would normally be forbidden by orphan rules/coherence.
- There is a trait `InferCtxtLike` to allow us to implement `DebugWithInfcx` for types that live in `rustc_type_ir`
This allows debug formatting various `ty::*` structures with universes shown by using the `Debug` impl for `OptWithInfcx::new(ty, infcx)`
---
This PR does not add `DebugWithInfcx` impls to absolutely _everything_ that should realistically have them, for example you cannot use `OptWithInfcx<Obligation<Predicate>>`. I am leaving this to a future PR to do so as it would likely be a lot more work to do.
Rename `adjustment::PointerCast` and variants using it to `PointerCoercion`
It makes it sounds like the `ExprKind` and `Rvalue` are supposed to represent all pointer related casts, when in reality their just used to share a little enum variants. Make it clear there these are only coercions and that people who see this and think "why are so many pointer related casts not in these variants" aren't insane.
This enum was added in #59987. I'm not sure whether the variant sharing is actually worth it, but this at least makes it less confusing.
r? oli-obk
It makes it sound like the `ExprKind` and `Rvalue` are supposed to represent all pointer related
casts, when in reality their just used to share a some enum variants. Make it clear there these
are only coercion to make it clear why only some pointer related "casts" are in the enum.
Move `TyCtxt::mk_x` to `Ty::new_x` where applicable
Part of rust-lang/compiler-team#616
turns out there's a lot of places we construct `Ty` this is a ridiculously huge PR :S
r? `@oli-obk`
Specialize `try_destructure_mir_constant` for its sole user (pretty printing)
We can't remove the query, as we need to invoke it from rustc_middle, but can only implement it in mir interpretation/const eval.
r? `@RalfJung` for a first round.
While we could move all the logic into pretty printing, that would end up duplicating a bit of code with const eval, which doesn't seem great either.
Rollup of 8 pull requests
Successful merges:
- #113010 (rust-installer & rls: remove exclusion from rustfmt & tidy )
- #113317 ( -Ztrait-solver=next: stop depending on old solver)
- #113319 (`TypeParameterDefinition` always require a `DefId`)
- #113320 (Add some extra information to opaque type cycle errors)
- #113321 (Move `ty::ConstKind` to `rustc_type_ir`)
- #113337 (Winnow specialized impls during selection in new solver)
- #113355 (Move most coverage code out of `rustc_codegen_ssa`)
- #113356 (Add support for NetBSD/riscv64 aka. riscv64gc-unknown-netbsd.)
r? `@ghost`
`@rustbot` modify labels: rollup
Winnow specialized impls during selection in new solver
We need to be able to winnow impls that are specialized by more specific impls in order for codegen to be able to proceed.
r? ``@lcnr``
Move `ty::ConstKind` to `rustc_type_ir`
Needed this in another PR for custom debug impls, and this will also be required to move the new solver into a separate crate that does not use `TyCtxt` so that r-a and friends can depend on the trait solver.
Rebased on top of #113325, only the second and third commits needs reviewing
Add some extra information to opaque type cycle errors
Plus a bunch of cleanups.
This should help users debug query cycles due to auto trait checking. We'll probably want to fix cycle errors in most (or all?) cases by looking at the current item's hidden types (new solver does this), and by delaying the auto trait checks to after typeck.
Effects/keyword generics MVP
This adds `feature(effects)`, which adds `const host: bool` to the generics of const functions, const traits and const impls. This will be used to replace the current logic around const traits.
r? `@oli-obk`
Make simd_shuffle_indices use valtrees
This removes the second-to-last user of the `destructure_mir_constant` query. So in a follow-up we can remove the query and just move the query provider function directly into pretty printing (which is the last user).
cc `@rust-lang/clippy` there's a small functional change, but I think it is correct?
Make `UnwindAction::Continue` explicit in MIR dump
Makes it easier to spot unwinding related issues in MIR by making `UnwindAction::Continue` explicit, just like all other `UnwindAction`s.
Migrate `TyCtxt::predicates_of` and `ParamEnv::caller_bounds` to `Clause`
The last big change in the series.
I will follow-up with additional filed issues once this PR lands:
- [ ] Investigate making `TypeFoldable<TyCtxt<'tcx>> for ty::Clause<'tcx>` implementation less weird: 2efe091705/compiler/rustc_middle/src/ty/structural_impls.rs (L672)
- [ ] Clean up the elaborator since it should only be emitting child clauses, not predicates
- [ ] Rename identifiers like `pred` and `predicates` to `clause` if they're actually clauses around the codebase
- [ ] Validate that all of the `ToPredicate` impls are acutally still needed, or prune them if they're not
r? `@ghost` until the other branch lands
Various impl trait in assoc tys cleanups
r? `@compiler-errors`
All commits except for the last are pure refactorings. 274dab5bd658c97886a8987340bf50ae57900c39 allows struct fields to participate in deciding whether a function has an opaque in its signature.
best reviewed commit by commit
Migrate `item_bounds` to `ty::Clause`
Should be simpler than the next PR that's coming up. Last three commits are the relevant ones.
r? ``@oli-obk`` or ``@lcnr``
Don't ICE on unnormalized struct tail in layout computation
1. We try to compute a `SizeSkeleton` even if a layout error occurs, but we really only need to do this if we get `LayoutError::Unknown`, since that means our type is too polymorphic to actually compute the full layout. If we have other errors, like `LayoutError::NormalizationError` or `LayoutError::Cycle`, then we can't really make any progress, since this represents an actual error.
2. Avoid using `normalize_erasing_regions` and `struct_tail_erasing_lifetimes` since those ICE on normalization errors, and since we may call `layout_of` in HIR typeck, we don't know for certain that we're on the happy path.
Fixes#112736
Inline before merging cgus
Because CGU merging relies on CGU sizes, but the CGU sizes before inlining aren't accurate.
This change doesn't have much effect on compile perf, but it makes follow-on changes that involve more sophisticated reasoning about CGU sizes much easier.
r? `@wesleywiser`
- Rename `create_size_estimate` as `compute_size_estimate`, because that
makes more sense for the second and subsequent calls for each CGU.
- Change `CodegenUnit::size_estimate` from `Option<usize>` to `usize`.
We can still assert that `compute_size_estimate` is called first.
- Move the size estimation for `place_mono_items` inside the function,
for consistency with `merge_codegen_units`.
Because CGU merging relies on CGU sizes, but the CGU sizes before
inlining aren't accurate.
This requires tweaking how the sizes are updated during merging: if CGU
A and B both have an inlined function F, then `size(A + B)` will be a
little less than `size(A) + size(B)`, because `A + B` will only have one
copy of F. Also, the minimum CGU size is increased because it now has to
account for inlined functions.
This change doesn't have much effect on compile perf, but it makes
follow-on changes that involve more sophisticated reasoning about CGU
sizes much easier.
Add a fully fledged `Clause` type, rename old `Clause` to `ClauseKind`
Does two basic things before I put up a more delicate set of PRs (along the lines of #112714, but hopefully much cleaner) that migrate existing usages of `ty::Predicate` to `ty::Clause` (`predicates_of`/`item_bounds`/`ParamEnv::caller_bounds`).
1. Rename `Clause` to `ClauseKind`, so it's parallel with `PredicateKind`.
2. Add a new `Clause` type which is parallel to `Predicate`.
* This type exposes `Clause::kind(self) -> Binder<'tcx, ClauseKind<'tcx>>` which is parallel to `Predicate::kind` 😸
The new `Clause` type essentially acts as a newtype wrapper around `Predicate` that asserts that it is specifically a `PredicateKind::Clause`. Turns out from experimentation[^1] that this is not negative performance-wise, which is wonderful, since this a much simpler design than something that requires encoding the discriminant into the alignment bits of a predicate kind, or something else like that...
r? ``@lcnr`` or ``@oli-obk``
[^1]: https://github.com/rust-lang/rust/pull/112714#issuecomment-1595653910
Merge `BorrowKind::Unique` into `BorrowKind::Mut`
Fixes#112072
Might have conflict with #112070
r? `@lcnr`
I'm not sure what's the suitable change in a couple places.
Add `implement_via_object` to `rustc_deny_explicit_impl` to control object candidate assembly
Some built-in traits are special, since they are used to prove facts about the program that are important for later phases of compilation such as codegen and CTFE. For example, the `Unsize` trait is used to assert to the compiler that we are able to unsize a type into another type. It doesn't have any methods because it doesn't actually *instruct* the compiler how to do this unsizing, but this is later used (alongside an exhaustive match of combinations of unsizeable types) during codegen to generate unsize coercion code.
Due to this, these built-in traits are incompatible with the type erasure provided by object types. For example, the existence of `dyn Unsize<T>` does not mean that the compiler is able to unsize `Box<dyn Unsize<T>>` into `Box<T>`, since `Unsize` is a *witness* to the fact that a type can be unsized, and it doesn't actually encode that unsizing operation in its vtable as mentioned above.
The old trait solver gets around this fact by having complex control flow that never considers object bounds for certain built-in traits:
2f896da247/compiler/rustc_trait_selection/src/traits/select/candidate_assembly.rs (L61-L132)
However, candidate assembly in the new solver is much more lovely, and I'd hate to add this list of opt-out cases into the new solver. Instead of maintaining this complex and hard-coded control flow, instead we can make this a property of the trait via a built-in attribute. We already have such a build attribute that's applied to every single trait that we care about: `rustc_deny_explicit_impl`. This PR adds `implement_via_object` as a meta-item to that attribute that allows us to opt a trait out of object-bound candidate assembly as well.
r? `@lcnr`
Switch the BB CFG cache from postorder to RPO
The `BasicBlocks` CFG cache is interesting:
- it stores a postorder, but `traversal::postorder` doesn't use it
- `traversal::reverse_postorder` does traverse the postorder cache backwards
- we do more RPO traversals than postorder traversals (around 20x on the perf.rlo benchmarks IIRC) but it's not cached
- a couple places here and there were manually reversing the non-cached postorder traversal
This PR switches the order of the cache, and makes a bit more use of it. This is a tiny win locally, but it's also for consistency and aesthetics.
r? `@ghost`
Make `Bound::predicates` use `Clause`
Part of #107250
`Bound::predicates` returns an iterator over `Binder<_, Clause>` instead of `Predicate`.
I tried updating `explicit_predicates_of` as well, but it seems that it needs a lot more change than I thought. Will do it in a separate PR instead.
Add `<meta charset="utf-8">` to `-Zdump-mir-spanview` output
Without an explicit `<meta charset>` declaration, some browsers (e.g. Safari) won't detect the page encoding as UTF-8, causing unicode characters in the dump output to display incorrectly.
Add `AliasKind::Weak` for type aliases.
`type Foo<T: Debug> = Bar<T>;` does not check `T: Debug` at use sites of `Foo<NotDebug>`, because in contrast to a
```rust
trait Identity {
type Identity;
}
impl<T: Debug> Identity for T {
type Identity = T;
}
<NotDebug as Identity>::Identity
```
type aliases do not exist in the type system, but are expanded to their aliased type immediately when going from HIR to the type layer.
Similarly:
* a private type alias for a public type is a completely fine thing, even though it makes it a bit hard to write out complex times sometimes
* rustdoc expands the type alias, even though often times users use them for documentation purposes
* diagnostics show the expanded type, which is confusing if the user wrote a type alias and the diagnostic talks about another type that they don't know about.
For type alias impl trait, these issues do not actually apply in most cases, but sometimes you have a type alias impl trait like `type Foo<T: Debug> = (impl Debug, Bar<T>);`, which only really checks it for `impl Debug`, but by accident prevents `Bar<T>` from only being instantiated after proving `T: Debug`. This PR makes sure that we always check these bounds explicitly and don't rely on an implementation accident.
To not break all the type aliases out there, we only use it when the type alias contains an opaque type. We can decide to do this for all type aliases over an edition.
Or we can later extend this to more types if we figure out the back-compat concerns with suddenly checking such bounds.
As a side effect, easily allows fixing https://github.com/rust-lang/rust/issues/108617, which I did.
fixes https://github.com/rust-lang/rust/issues/108617
Make assumption functions in new solver take `Binder<'tcx, Clause<'tcx>>`
We just use an if-let to match on an optional clause at all the places where we transition from `Predicate` -> `Clause`, but I assume that when things like item-bounds and param-env start to only store `Clause`s then those can just be trivially dropped.
r? ``@lcnr``
Opportunistically resolve regions in new solver
Use `opportunistic_resolve_var` during canonicalization to collapse some regions.
We have to start using `CanonicalVarValues::is_identity_modulo_regions`. We also have to modify that function to consider responses like `['static, ^0, '^1, ^2]` to be an "identity" response, since because we opportunistically resolve regions, there's no longer a 1:1 mapping between canonical var values and bound var indices in the response...
There's one nasty side-effect -- one test (`tests/ui/dyn-star/param-env-infer.rs`) starts to ICE because the certainty goes from `Yes` to `Maybe(Overflow)`... Not exactly sure why, though? Putting this up for discussion/investigation.
r? ```@lcnr```
This commit reverts a change made in #111425.
It was believed that this change was necessary for implementing type privacy lints, but #111801 showed that it was not necessary.
Quite opposite, the revert fixes some issues.
Remember names of `cfg`-ed out items to mention them in diagnostics
# Examples
## `serde::Deserialize` without the `derive` feature (a classic beginner mistake)
I had to slightly modify serde so that it uses explicit re-exports instead of a glob re-export. (Update: a serde PR was merged that adds the manual re-exports)
```
error[E0433]: failed to resolve: could not find `Serialize` in `serde`
--> src/main.rs:1:17
|
1 | #[derive(serde::Serialize)]
| ^^^^^^^^^ could not find `Serialize` in `serde`
|
note: crate `serde` has an item named `Serialize` but it is inactive because its cfg predicate evaluated to false
--> /home/gh-Nilstrieb/.cargo/registry/src/index.crates.io-6f17d22bba15001f/serde-1.0.160/src/lib.rs:343:1
|
343 | #[cfg(feature = "serde_derive")]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
344 | pub use serde_derive::{Deserialize, Serialize};
| ^^^^^^^^^
= note: the item is gated behind the `serde_derive` feature
= note: see https://doc.rust-lang.org/cargo/reference/features.html for how to activate a crate's feature
```
(the suggestion is not ideal but that's serde's fault)
I already tested the metadata size impact locally by compiling the `windows` crate without any features. `800k` -> `809k`
r? `@ghost`
Add `-Ztrait-solver=next-coherence`
Flag that conditionally uses the trait solver *only* during coherence, for more testing and/or eventual partial-migration onto the trait solver (in the medium- to long-term).
* This still uses the selection context in some of the coherence methods I think, so it's not "complete". Putting this up for review and/or for further work in-tree.
* I probably need to spend a bit more time making sure that we don't sneakily create any other infcx's during coherence that also need the new solver enabled.
r? `@lcnr`
Emit an error when return-type-notation is used with type/const params
These are not intended to be supported initially, even though the compiler supports them internally...
- Switch TypeId to 128 bits
- Hack around the fact that tracing-subscriber dislikes how TypeId is hashed
- Remove lowering of type_id128 from rustc_codegen_llvm
- Remove unnecessary `type_id128` intrinsic (just change return type of `type_id`)
- Only hash the lower 64 bits of the TypeId
- Reword comment
Normalize anon consts in new solver
We don't do any of that `expand_abstract_consts` stuff so this isn't sufficient to make GCE work, but it does allow, e.g. `[(); 1]: Default`, to solve.
r? `@BoxyUwU`
Require that const param tys implement `ConstParamTy`
1. Require that const param tys implement `ConstParamTy` instead of using `search_for_adt_const_param_violation`
2. Add `StructuralPartialEq` as a supertrait for `ConstParamTy`, since we need to make sure that we derive *both* `PartialEq` and `Eq`
3. Implement `ConstParamTy` for tuples up to 12 (or whatever the default for tuples is)
4. Add some custom diagnostics to `ConstParamTy` errors, to avoid regressions from (1.). It's still not as great as it could be -- will point out inline in comments.
r? `@BoxyUwU`
Use translatable diagnostics in `rustc_const_eval`
This PR:
* adds a `no_span` parameter to `note` / `help` attributes when using `Subdiagnostic` to allow adding notes/helps without using a span
* has minor tweaks and changes to error messages
`#[cfg]`s are frequently used to gate crate content behind cargo
features. This can lead to very confusing errors when features are
missing. For example, `serde` doesn't have the `derive` feature by
default. Therefore, `serde::Serialize` fails to resolve with a generic
error, even though the macro is present in the docs.
This commit adds a list of all stripped item names to metadata. This is
filled during macro expansion and then, through a fed query, persisted
in metadata. The downstream resolver can then access the metadata to
look at possible candidates for mentioning in the errors.
This slightly increases metadata (800k->809k for the feature-heavy
windows crate), but not enough to really matter.
Preserve substs in opaques recorded in typeck results
This means that we now prepopulate MIR with opaques with the right substs.
The first commit is a hack that I think we discussed, having to do with `DefiningAnchor::Bubble` basically being equivalent to `DefiningAnchor::Error` in the new solver, so having to use `DefiningAnchor::Bind` instead, lol.
r? `@lcnr`
Replace const eval limit by a lint and add an exponential backoff warning
The lint triggers at the first power of 2 that comes after 1 million function calls or traversed back-edges (takes less than a second on usual programs). After the first emission, an unsilenceable warning is repeated at every following power of 2 terminators, causing it to get reported less and less the longer the evaluation runs.
cc `@rust-lang/wg-const-eval`
fixes#93481closes#67217
Only rewrite valtree-constants to patterns and keep other constants opaque
Now that we can reliably fall back to comparing constants with `PartialEq::eq` to the match scrutinee, we can
1. eagerly try to convert constants to valtrees
2. then deeply convert the valtree to a pattern
3. if the to-valtree conversion failed, create an "opaque constant" pattern.
This PR specifically avoids any behavioral changes or major cleanups. What we can now do as follow ups is
* move the two remaining call sites to `destructure_mir_constant` off that query
* make valtree to pattern conversion infallible
* this needs to be done after careful analysis of the effects. There may be user visible changes from that.
based on https://github.com/rust-lang/rust/pull/111768
move `super_relate_consts` hack to `normalize_param_env_or_error`
`super_relate_consts` has as hack in it to work around the fact that `normalize_param_env_or_error` is broken. When relating two constants we attempt to evaluate them (aka normalize them). This is not an issue in any way specific to const generics, type aliases also have the same issue as demonstrated in [this code](https://play.rust-lang.org/?version=stable&mode=debug&edition=2021&gist=84b6d3956a2c852a04b60782476b56c9).
Since the hack in `super_relate_consts` only exists to make `normalize_param_env_or_error` emit less errors move it to `normalize_param_env_or_error`. This makes `super_relate_consts` act more like the normal plain structural equality its supposed to and should help ensure that the hack doesnt accidentally affect other situations.
r? `@compiler-errors`
change `BorrowKind::Unique` to be a mutating `PlaceContext`
fixes#112056
I believe that `BorrowKind::Unique` is a footgun in general, so I added a FIXME and opened https://github.com/rust-lang/rust/issues/112072. This is a bit too involved for this PR though.
refactor and cleanup the leak check, add it to new solver
ended up being a bit more involved than I wanted but is hopefully still easy enough to review as a single PR, can split it into separate ones otherwise.
this can be reviewed commit by commit:
a473d55cdb9284aa2b01282d1b529a2a4d26547b 31a686646534ca006d906ec757ece4e771d6f973 949039c107852a5e36361c08b62821a0613656f5 242917bf5170d9a723c6c8e23e9d9d0c2fa8dc9d ed2b25a7aa28be3184be9e3022c2796a30eaad87 are all pretty straightforward.
03dd83b4c3f4ff27558f5c8ab859bd9f83db1d04 makes it easier to refactor coherence in a later commit, see the commit description, cc `@oli-obk`
4fe311d807a77b6270f384e41689bf5d58f46aec I don't quite remember what we wanted to test here, this definitely doesn't test that the occurs check doesn't cause incorrect errors in coherence, also cc `@oli-obk` here. I may end up writing a new test for this myself later.
5c200d88a91b75bd0875b973150655bd581ef97a is the main refactor of the leak check, changing it to take the `outer_universe` instead of getting it from a snapshot. Using a snapshot requires us to be in a probe which we aren't in the new solver, it also just feels dirty as snapshots don't really have anything to do with universes.
with all of this cfc230d54188d9c7ed867a9a0d1f51be77b485f9 is now kind of trivial.
r? `@nikomatsakis`
`EarlyBinder::new` -> `EarlyBinder::bind`
for consistency with `Binder::bind`. it may make sense to also add `EarlyBinder::dummy` in places where we know that no parameters exist, but I left that out of this PR.
r? `@jackh726` `@kylematsuda`
Make `TyKind: Debug` have less verbose output
Current `TyKind: Debug` impl is basically unusable for debugging, its too verbose even for verbose debugging 🤣 This PR replaces the debug logic for `TyKind` with a more manual debug impl instead of a hand expanded derived impl. This should help make #107084 more reasonable to land since the output of `Ty: Debug` will be better.
This isn't a fully completed change to the `Debug` impl of `TyKind` as there's still logic from the derive macro for some variants. Some of the variants are also not consisten with the `-Zverbose` printing of `Ty`, ideally `-Zverbose` printing of `Ty` would also just defer to the debug impl instead of having lots of checks in pretty printing. I plan on fixing this in follow up PRs since it seems tricky to do in this one and its already a large PR 😅
Use `Cow` in `{D,Subd}iagnosticMessage`.
Each of `{D,Subd}iagnosticMessage::{Str,Eager}` has a comment:
```
// FIXME(davidtwco): can a `Cow<'static, str>` be used here?
```
This commit answers that question in the affirmative. It's not the most compelling change ever, but it might be worth merging.
This requires changing the `impl<'a> From<&'a str>` impls to `impl From<&'static str>`, which involves a bunch of knock-on changes that require/result in call sites being a little more precise about exactly what kind of string they use to create errors, and not just `&str`. This will result in fewer unnecessary allocations, though this will not have any notable perf effects given that these are error paths.
Note that I was lazy within Clippy, using `to_string` in a few places to preserve the existing string imprecision. I could have used `impl Into<{D,Subd}iagnosticMessage>` in various places as is done in the compiler, but that would have required changes to *many* call sites (mostly changing `&format("...")` to `format!("...")`) which didn't seem worthwhile.
r? `@WaffleLapkin`
Each of `{D,Subd}iagnosticMessage::{Str,Eager}` has a comment:
```
// FIXME(davidtwco): can a `Cow<'static, str>` be used here?
```
This commit answers that question in the affirmative. It's not the most
compelling change ever, but it might be worth merging.
This requires changing the `impl<'a> From<&'a str>` impls to `impl
From<&'static str>`, which involves a bunch of knock-on changes that
require/result in call sites being a little more precise about exactly
what kind of string they use to create errors, and not just `&str`. This
will result in fewer unnecessary allocations, though this will not have
any notable perf effects given that these are error paths.
Note that I was lazy within Clippy, using `to_string` in a few places to
preserve the existing string imprecision. I could have used `impl
Into<{D,Subd}iagnosticMessage>` in various places as is done in the
compiler, but that would have required changes to *many* call sites
(mostly changing `&format("...")` to `format!("...")`) which didn't seem
worthwhile.
MIR: opt-in normalization of `BasicBlock` and `Local` numbering
This doesn't matter at all for actual codegen, but after spending some time reading pre-codegen MIR, I was wishing I didn't have to jump around so much in reading post-inlining code.
So this add two passes that are off by default for every mir level, but can be enabled (`-Zmir-enable-passes=+ReorderBasicBlocks,+ReorderLocals`) for humans.
Add warn-by-default lint when local binding shadows exported glob re-export item
This PR introduces a warn-by-default rustc lint for when a local binding (a use statement, or a type declaration) produces a name which shadows an exported glob re-export item, causing the name from the exported glob re-export to be hidden (see #111336).
### Unresolved Questions
- [x] ~~Is this approach correct? While it passes the UI tests, I'm not entirely convinced it is correct.~~ Seems to be ok now.
- [x] ~~What should the lint be called / how should it be worded? I don't like calling `use x::*;` or `struct Foo;` a "local binding" but they are `NameBinding`s internally if I'm not mistaken.~~ ~~The lint is called `local_binding_shadows_glob_reexport` for now, unless a better name is suggested.~~ `hidden_glob_reexports`.
Fixes#111336.
Rollup of 5 pull requests
Successful merges:
- #111384 (Fix linking Mac Catalyst by including LC_BUILD_VERSION in object files)
- #111899 (CGU cleanups)
- #111940 (Clarify safety concern of `io::Read::read` is only relevant in unsafe code)
- #111947 (Add test for RPIT defined with different hidden types with different substs)
- #111951 (Correct comment on privately uninhabited pattern.)
Failed merges:
- #111954 (improve error message for calling a method on a raw pointer with an unknown pointee)
r? `@ghost`
`@rustbot` modify labels: rollup
Ensure Fluent messages are in alphabetical order
Fixes#111847
This adds a tidy check to ensure Fluent messages are in alphabetical order, as well as sorting all existing messages. I think the error could be worded better, would appreciate suggestions.
<details>
<summary>Script used to sort files</summary>
```py
import sys
import re
fn = sys.argv[1]
with open(fn, 'r') as f:
data = f.read().split("\n")
chunks = []
cur = ""
for line in data:
if re.match(r"^([a-zA-Z0-9_]+)\s*=\s*", line):
chunks.append(cur)
cur = ""
cur += line + "\n"
chunks.append(cur)
chunks.sort()
with open(fn, 'w') as f:
f.write(''.join(chunks).strip("\n\n") + "\n")
```
</details>
Handle opaques in the new solver (take 2?)
Implement a new strategy for handling opaques in the new solver.
First, queries now carry both their defining anchor and the opaques that were defined in the inference context at the time of canonicalization. These are both used to pre-populate the inference context used by the canonical query.
Second, use the normalizes-to goal to handle opaque types in the new solver. This means that opaques are handled like projection aliases, but with their own rules:
* Can only define opaques if they're "defining uses" (i.e. have unique params in all their substs).
* Can only define opaques that are from the anchor.
* Opaque type definitions are modulo regions. So that means `Opaque<'?0r> = HiddenTy1` and `Opaque<?'1r> = HiddenTy2` equate `HiddenTy1` and `HiddenTy2` instead of defining them as different opaque type keys.
Don't leak the function that is called on drop
It probably wasn't causing problems anyway, but still, a `// this leaks, please don't pass anything that owns memory` is not sustainable.
I could implement a version which does not require `Option`, but it would require `unsafe`, at which point it's probably not worth it.
Use `Option::is_some_and` and `Result::is_ok_and` in the compiler
`.is_some_and(..)`/`.is_ok_and(..)` replace `.map_or(false, ..)` and `.map(..).unwrap_or(false)`, making the code more readable.
This PR is a sibling of https://github.com/rust-lang/rust/pull/111873#issuecomment-1561316515
Preprocess and cache dominator tree
Preprocessing dominators has a very strong effect for https://github.com/rust-lang/rust/pull/111344.
That pass checks that assignments dominate their uses repeatedly. Using the unprocessed dominator tree caused a quadratic runtime (number of bbs x depth of the dominator tree).
This PR also caches the dominator tree and the pre-processed dominators in the MIR cfg cache.
Rebase of https://github.com/rust-lang/rust/pull/107157
cc `@tmiasko`
Pretty-print inherent projections correctly
Previously, we were trying to pretty-print inherent projections with `Printer::print_def_path` which is incorrect since
it expects the substitutions to be of a certain format (parents substs followed by own substs) which doesn't hold for
inherent projections (self type subst followed by own substs).
Now we print inherent projections manually.
Fixes#111390.
Fixes#111397.
Lacking tests! Is there a test suite / compiletest flags for the pretty-printer? In most if not all cases,
inherent projections are normalized away before they get the chance to appear in diagnostics.
If I were to create regression tests for linked issues, they would need to be `mir-opt` tests to exercise
`-Zdump-mir=all` (right?) which doesn't feel quite adequate to me.
`@rustbot` label F-inherent_associated_types
Check opaques for mismatch during writeback
Revive #111705.
I realized that we don't need to put any substs in the writeback results since all of the hidden types have already been remapped. See the comment in `compiler/rustc_middle/src/ty/typeck_results.rs`, which should make that clear for other explorers of the codebase.
Additionally, we need to do some diagnostic stashing because the diagnostics we produce during HIR typeck is very poor and we should prefer the diagnostic that comes from MIR, if we have one.
r? `@oli-obk`
fix recursion depth handling after confirmation
fixes#111729
I think having to use `Obligation::with_depth` correctly everywhere is very hard because e.g. the nested obligations from `eq` currently do not have the correct obligation depth.
The new solver [completely removes `recursion_depth` from obligations](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/traits/solve/struct.Goal.html) and instead tracks the depth in the solver itself which is far easier to get right. Moving the old solver towards this shouldn't be that hard but is probably somewhat annoying.
r? `@matthewjasper`
Add extra debug assertions for equality for Adt/Variant/FieldDef
Would've made it easier to both catch and test https://github.com/rust-lang/rust/pull/111494. Maybe not worth it, since it does mean that the compiler is doing extra work when debug-assertions are enabled, but also that's what debug assertions are for :^)
This is a revival of #111523 because I think I pushed an empty branch and bors got a bit too excited it closed the PR.
Fix dependency tracking for debugger visualizers
This PR fixes dependency tracking for debugger visualizer files by changing the `debugger_visualizers` query to an `eval_always` query that scans the AST while it is still available. This way the set of visualizer files is already available when dep-info is emitted. Since the query is turned into an `eval_always` query, dependency tracking will now reliably detect changes to the visualizer script files themselves.
TODO:
- [x] perf.rlo
- [x] Needs a bit more documentation in some places
- [x] Needs regression test for the incr. comp. case
Fixes https://github.com/rust-lang/rust/issues/111226
Fixes https://github.com/rust-lang/rust/issues/111227
Fixes https://github.com/rust-lang/rust/issues/111295
r? `@wesleywiser`
cc `@gibbyfree`
Only depend on CFG_VERSION in rustc_interface
This avoids having to rebuild the whole compiler on each commit when `omit-git-hash = false`.
cc https://github.com/rust-lang/rust/issues/76720 - this won't fix it, and I'm not suggesting we turn this on by default, but it will make it less painful for people who do have `omit-git-hash` on as a workaround.
Merge query property modules into one
This merges all the query modules that defines types into a single module per query with a normal naming convention for type aliases.
r? ``@cjgillot``
debug format `Const`'s less verbosely
Not user visible change only visible to people debugging const generics.
Currently debug output for `ty::Const` is super verbose (even for `-Zverbose` lol), things like printing infer vars as `Infer(Var(?0c))` instead of just `?0c`, bound vars and placeholders not using `^0_1` or `!0_1` syntax respectively. With these changes its imo better but not perfect:
`Const { ty: usize, kind: ^0_1 }`
is still a lot for not much information. not entirely sure what to do about that so not dealing with it yet.
Need to do formatting for `ConstKind::Expr` at some point too since rn it sucks (doesn't even print anything with `Display`) not gonna do that in this PR either.
r? `@compiler-errors`
Erase `ReError` properly
Fixes#111341
Since we check whether a type has free regions before erasing (to short circuit unnecesary folding), we need to consider `ReError` as a free region, or else we'll skip it when erasing a type that only mentions `ReError`.
cc `@nnethercote`
Handle error body in generator layout
Fixes#111468
I feel like making this query return `Option<GeneratorLayout>` might be better but had some issues with that approach
Suppress "erroneous constant used" for constants tainted by errors
When constant evaluation fails because its MIR is tainted by errors,
suppress note indicating that erroneous constant was used, since those
errors have to be fixed regardless of the constant being used or not.
Fixes#110891.
Error message all end up passing into a function as an `impl
Into<{D,Subd}iagnosticMessage>`. If an error message is creatd as
`&format("...")` that means we allocate a string (in the `format!`
call), then take a reference, and then clone (allocating again) the
reference to produce the `{D,Subd}iagnosticMessage`, which is silly.
This commit removes the leading `&` from a lot of these cases. This
means the original `String` is moved into the
`{D,Subd}iagnosticMessage`, avoiding the double allocations. This
requires changing some function argument types from `&str` to `String`
(when all arguments are `String`) or `impl
Into<{D,Subd}iagnosticMessage>` (when some arguments are `String` and
some are `&str`).
