CFI: Append debug location to CFI blocks
Currently we're not appending debug locations to the inserted CFI blocks. This shows up in #132615 and #100783. This change fixes that by passing down the debug location to the CFI type-test generation and appending it to the blocks.
Credits also belong to `@jakos-sec` who worked with me on this.
Add a default implementation for CodegenBackend::link
As a side effect this should add raw-dylib support to cg_gcc as the default ArchiveBuilderBuilder that is used implements create_dll_import_lib. I haven't tested if the raw-dylib support actually works however.
coverage: Restrict empty-span expansion to only cover `{` and `}`
Coverage instrumentation has some tricky code for converting a coverage-relevant `Span` into a set of start/end line/byte-column coordinates that will be embedded in the CGU's coverage metadata.
A big part of this complexity is special code for handling empty spans, which are expanded into non-empty spans (if possible) because LLVM's coverage reporter does not handle empty spans well.
This PR simplifies that code by restricting it to only apply in two specific situations: when the character after the empty span is `{`, or the character before the empty span is `}`.
(As an added benefit, this means that the expanded spans no longer extend awkwardly beyond the end of a physical line, which was common under the previous implementation.)
Along the way, this PR also removes some unhelpful code for dealing with function source code spread across multiple files. Functions currently can't have coverage spans in multiple files, and if that ever changes (e.g. to properly support expansion regions) then this code will need to be completely overhauled anyway.
After link_binary the temporary files referenced by CodegenResults are
deleted, so calling link_binary again with the same CodegenResults
should not be allowed.
LLVM does not expect to ever see multiple dbg_declares for the same variable at the same
location with different values. proc-macros make it possible for arbitrary code,
including multiple calls that get inlined, to happen at any given location in the source
code. Add discriminators when that happens so these locations are different to LLVM.
This may interfere with the AddDiscriminators pass in LLVM, which is added by the
unstable flag -Zdebug-info-for-profiling.
Fixes#131944
Rollup of 5 pull requests
Successful merges:
- #132552 (Add v9, v8plus, and leoncasa target feature to sparc and use v8plus in create_object_file)
- #132745 (pointee_info_at: fix logic for recursing into enums)
- #132777 (try_question_mark_nop: update test for LLVM 20)
- #132785 (rustc_target: more target string fixes for LLVM 20)
- #132794 (Use a separate dir for r-a builds consistently in helix config)
r? `@ghost`
`@rustbot` modify labels: rollup
Trim and tidy includes in `rustc_llvm`
These includes tend to accumulate over time, and are usually only removed when something breaks in a new LLVM version, so it's nice to clean them up manually once in a while.
General strategy used for this PR:
- Remove all includes from `LLVMWrapper.h` that aren't needed by the header itself, transplanting them to individual source files as necessary.
- For each source file, temporarily remove each include if doing so doesn't cause a compile error.
- If a “required” include looks like it shouldn't be needed, try replacing it with its sub-includes, then trim that list.
- After doing all of the above, go back and re-add any removed include if the file does actually use things defined in that header, even if the header happens to also be included by something else.
Functions currently can't have mappings in multiple files, and if that ever
changes (e.g. to properly support expansion regions), this code will need to be
completely overhauled anyway.
We already had a dedicated `LocalFileId` index type, but previously we used a
raw `u32` for global file IDs, because index types were harder to pass through
FFI.
Simplify FFI calls for `-Ztime-llvm-passes` and `-Zprint-codegen-stats`
The existing code for these unstable LLVM-infodump flags was jumping through hoops to pass an allocated C string across the FFI boundary, when it's much simpler to just write to a `&RustString` instead.
coverage: Extract safe FFI wrapper functions to `llvm_cov`
This PR takes all of the inline `unsafe` calls in coverage codegen, and all the safe wrapper functions in `coverageinfo/mod.rs`, and moves them to a new `llvm_cov` submodule that is dedicated to safe FFI wrapper functions. This reduces the mixing of abstraction levels in the rest of coverage codegen.
As a follow-up, this PR also tidies up the names and signatures of several of the coverage FFI functions.
Set "symbol name" in raw-dylib import libraries to the decorated name
`windows-rs` received a bug report that mixing raw-dylib generated and the Windows SDK import libraries was causing linker failures: <https://github.com/microsoft/windows-rs/issues/3285>
The root cause turned out to be #124958, that is we are not including the decorated name in the import library and so the import name type is also not being correctly set.
This change modifies the generation of import libraries to set the "symbol name" to the fully decorated name and correctly marks the import as being data vs function.
Note that this also required some changes to how the symbol is named within Rust: for MSVC we now need to use the decorated name but for MinGW we still need to use partially decorated (or undecorated) name.
Fixes#124958
Passing i686 MSVC and MinGW build: <https://github.com/rust-lang/rust/actions/runs/11000433888?pr=130586>
r? `@ChrisDenton`
Add a new `wide-arithmetic` feature for WebAssembly
This commit adds a new rustc target feature named `wide-arithmetic` for WebAssembly targets. This corresponds to the [wide-arithmetic] proposal for WebAssembly which adds new instructions catered towards accelerating integer arithmetic larger than 64-bits. This proposal to WebAssembly is not standard yet so this new feature is flagged as an unstable target feature. Additionally Rust's LLVM version doesn't support this new feature yet since support will first be added in LLVM 20, so the feature filtering logic for LLVM is updated to handle this.
I'll also note that I'm not currently planning to add wasm-specific intrinsics to `std::arch::wasm32` at this time. The currently proposed instructions are all accessible through `i128` or `u128`-based operations which Rust already supports, so intrinsic shouldn't be necessary to get access to these new instructions.
[wide-arithmetic]: https://github.com/WebAssembly/wide-arithmetic
rustc_codegen_llvm: Add a new 'pc' option to branch-protection
Add a new 'pc' option to -Z branch-protection for aarch64 that enables the use of PC as a diversifier in PAC branch protection code.
When the pauth-lr target feature is enabled in combination with -Z branch-protection=pac-ret,pc, the new 9.5-a instructions (pacibsppc, retaasppc, etc) will be generated.
mark some target features as 'forbidden' so they cannot be (un)set with -Ctarget-feature
The context for this is https://github.com/rust-lang/rust/issues/116344: some target features change the way floats are passed between functions. Changing those target features is unsound as code compiled for the same target may now use different ABIs.
So this introduces a new concept of "forbidden" target features (on top of the existing "stable " and "unstable" categories), and makes it a hard error to (un)set such a target feature. For now, the x86 and ARM feature `soft-float` is on that list. We'll have to make some effort to collect more relevant features, and similar features from other targets, but that can happen after the basic infrastructure for this landed. (These features are being collected in https://github.com/rust-lang/rust/issues/131799.)
I've made this a warning for now to give people some time to speak up if this would break something.
MCP: https://github.com/rust-lang/compiler-team/issues/780
Support clobber_abi and vector registers (clobber-only) in PowerPC inline assembly
This supports `clobber_abi` which is one of the requirements of stabilization mentioned in #93335.
This basically does a similar thing I did in https://github.com/rust-lang/rust/pull/130630 to implement `clobber_abi` for s390x, but for powerpc/powerpc64/powerpc64le.
- This also supports vector registers (as `vreg`) as clobber-only, which need to support clobbering of them to implement `clobber_abi`.
- `vreg` should be able to accept `#[repr(simd)]` types as input/output if the unstable `altivec` target feature is enabled, but `core::arch::{powerpc,powerpc64}` vector types, `#[repr(simd)]`, and `core::simd` are all unstable, so the fact that this is currently a clobber-only should not be considered a blocker of clobber_abi implementation or stabilization. So I have not implemented it in this PR.
- See https://github.com/rust-lang/rust/pull/131551 (which is based on this PR) for a PR to implement this.
- (I'm not sticking to whether that PR should be a separate PR or part of this PR, so I can merge that PR into this PR if needed.)
Refs:
- PPC32 SysV: Section "Function Calling Sequence" in [System V Application Binary Interface PowerPC Processor Supplement](https://refspecs.linuxfoundation.org/elf/elfspec_ppc.pdf)
- PPC64 ELFv1: Section 3.2 "Function Calling Sequence" in [64-bit PowerPC ELF Application Binary Interface Supplement](https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.html#FUNC-CALL)
- PPC64 ELFv2: Section 2.2 "Function Calling Sequence" in [64-Bit ELF V2 ABI Specification](https://openpowerfoundation.org/specifications/64bitelfabi/)
- AIX: [Register usage and conventions](https://www.ibm.com/docs/en/aix/7.3?topic=overview-register-usage-conventions), [Special registers in the PowerPC®](https://www.ibm.com/docs/en/aix/7.3?topic=overview-special-registers-in-powerpc), [AIX vector programming](https://www.ibm.com/docs/en/aix/7.3?topic=concepts-aix-vector-programming)
- Register definition in LLVM: https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/PowerPC/PPCRegisterInfo.td#L189
If I understand the above four ABI documentations correctly, except for the PPC32 SysV's VR (Vector Registers) and 32-bit AIX (currently not supported by rustc)'s r13, there does not appear to be important differences in terms of implementing `clobber_abi`:
- The above four ABIs are consistent about FPR (0-13: volatile, 14-31: nonvolatile), CR (0-1,5-7: volatile, 2-4: nonvolatile), XER (volatile), and CTR (volatile).
- As for GPR, only the registers we are treating as reserved are slightly different
- r0, r3-r12 are volatile
- r1(sp, reserved), r14-31 are nonvolatile
- r2(reserved) is TOC pointer in PPC64 ELF/AIX, system-reserved register in PPC32 SysV (AFAIK used as thread pointer in Linux/BSDs)
- r13(reserved for non-32-bit-AIX) is thread pointer in PPC64 ELF, small data area pointer register in PPC32 SysV, "reserved under 64-bit environment; not restored across system calls[^r13]" in AIX)
- As for FPSCR, volatile in PPC64 ELFv1/AIX, some fields are volatile only in certain situations (rest are volatile) in PPC32 SysV/PPC64 ELFv2.
- As for VR (Vector Registers), it is not mentioned in PPC32 SysV, v0-v19 are volatile in both in PPC64 ELF/AIX, v20-v31 are nonvolatile in PPC64 ELF, reserved or nonvolatile depending on the ABI ([vec-extabi vs vec-default in LLVM](https://reviews.llvm.org/D89684), we are [using vec-extabi](https://github.com/rust-lang/rust/pull/131341#discussion_r1797693299)) in AIX:
> When the default Vector enabled mode is used, these registers are reserved and must not be used.
> In the extended ABI vector enabled mode, these registers are nonvolatile and their values are preserved across function calls
I left [FIXME comment about PPC32 SysV](https://github.com/rust-lang/rust/pull/131341#discussion_r1790496095) and added ABI check for AIX.
- As for VRSAVE, it is not mentioned in PPC32 SysV, nonvolatile in PPC64 ELFv1, reserved in PPC64 ELFv2/AIX
- As for VSCR, it is not mentioned in PPC32 SysV/PPC64 ELFv1, some fields are volatile only in certain situations (rest are volatile) in PPC64 ELFv2, volatile in AIX
We are currently treating r1-r2, r13 (non-32-bit-AIX), r29-r31, LR, CTR, and VRSAVE as reserved.
We are currently not processing anything about FPSCR and VSCR, but I feel those are things that should be processed by `preserves_flags` rather than `clobber_abi` if we need to do something about them. (However, PPCRegisterInfo.td in LLVM does not seem to define anything about them.)
Replaces #111335 and #124279
cc `@ecnelises` `@bzEq` `@lu-zero`
r? `@Amanieu`
`@rustbot` label +O-PowerPC +A-inline-assembly
[^r13]: callee-saved, according to [LLVM](6a6af0246b/llvm/lib/Target/PowerPC/PPCCallingConv.td (L322)) and [GCC](a9173a50e7/gcc/config/rs6000/rs6000.h (L859)).
Reduce dependence on the target name
The target name can be anything with custom target specs. Matching on fields inside the target spec is much more robust than matching on the target name.
Also remove the unused is_builtin target spec field.
The target name can be anything with custom target specs. Matching on
fields inside the target spec is much more robust than matching on the
target name.
Port most of `--print=target-cpus` to Rust
The logic and formatting needed by `--print=target-cpus` has historically been carried out in C++ code. Originally it used `printf` to write directly to the console, but later it switched over to writing to a `std::ostringstream` and then passing its buffer to a callback function pointer.
This PR replaces that C++ code with a very simple function that writes a list of CPU names to a `&RustString`, with the rest of the logic and formatting being handled by ordinary safe Rust code.
Move versioned Apple LLVM targets from `rustc_target` to `rustc_codegen_ssa`
Fully specified LLVM targets contain the OS version on macOS/iOS/tvOS/watchOS/visionOS, and this version depends on the deployment target environment variables like `MACOSX_DEPLOYMENT_TARGET`, `IPHONEOS_DEPLOYMENT_TARGET` etc.
We would like to move this to later in the compilation pipeline, both because it feels impure to access environment variables when fetching target information, but mostly because we need access to more information from https://github.com/rust-lang/rust/pull/130883 to do https://github.com/rust-lang/rust/issues/118204. See also https://github.com/rust-lang/rust/pull/129342#issuecomment-2335156119 for some discussion.
The first and second commit does the actual refactor, it should be a non-functional change, the third commit adds diagnostics for invalid deployment targets, which are now possible to do because we have access to the session.
Tested with the same commands as in https://github.com/rust-lang/rust/pull/130435.
r? ``````@petrochenkov``````
Remove support for `-Zprofile` (gcov-style coverage instrumentation)
Tracking issue: #42524
MCP: https://github.com/rust-lang/compiler-team/issues/798
---
This PR removes the unstable `-Zprofile` flag, which enables ”gcov-style” coverage instrumentation, along with its associated `-Zprofile-emit` configuration flag.
(The profile flag predates and is almost entirely separate from the stable `-Cinstrument-coverage` flag.)
Notably, the `-Zprofile` flag:
- Is largely untested in-tree, having only one run-make test that does not check whether its output is correct or useful.
- Has no known maintainer.
- Has seen no push towards stabilization.
- Has at least one severe regression reported in 2022 that apparently remains unaddressed.
- #100125
- Is confusingly named, since it appears to be more about coverage than performance profiling, and has nothing to do with PGO.
- Is fundamentally limited by relying on counters auto-inserted by LLVM, with no knowledge of Rust beyond debuginfo.
The OS version depends on the deployment target environment variables,
the access of which we want to move to later in the compilation pipeline
that has access to more information, for example `env_depinfo`.
LLVM continues to align more 128-bit integers to 128-bits in the data
layout rather than relying on the high level language to do it. Update
SPARC target files to match and add a backcompat replacement for current
LLVMs.
See llvm/llvm-project#106951 for details
Add a new 'pc' option to -Z branch-protection for aarch64 that
enables the use of PC as a diversifier in PAC branch protection code.
When the pauth-lr target feature is enabled in combination
with -Z branch-protection=pac-ret,pc, the new 9.5-a instructions
(pacibsppc, retaasppc, etc) will be generated.
Rename `rustc_abi::Abi` to `BackendRepr`
Remove the confabulation of `rustc_abi::Abi` with what "ABI" actually means by renaming it to `BackendRepr`, and rename `Abi::Aggregate` to `BackendRepr::Memory`. The type never actually represented how things are passed, as that has to have `PassMode` considered, at minimum, but rather it just is how we represented some things to the backend. This conflation arose because LLVM, the primary backend at the time, would lower certain IR forms using certain ABIs. Even that only somewhat was true, as it broke down when one ventured significantly afield of what is described by the System V AMD64 ABI either by using different architectures, ABI-modifying IR annotations, the same architecture **with different ISA extensions enabled**, or other... unexpected delights.
Unfortunately both names are still somewhat of a misnomer right now, as people have written code for years based on this misunderstanding. Still, their original names are even moreso, and for better or worse, this backend code hasn't received as much maintenance as the rest of the compiler, lately. Actually arriving at a correct end-state will simply require us to disentangle a lot of code in order to fix, much of it pointlessly repeated in several places. Thus this is not an "actual fix", just a way to deflect further misunderstandings.
cg_llvm: Clean up FFI calls for operand bundles
All of these FFI functions have equivalents in the stable LLVM-C API, though `LLVMBuildCallBr` requires a temporary polyfill on LLVM 18.
This PR also creates a clear split between `OperandBundleOwned` and `OperandBundle`, and updates the internals of the owner to be a little less terrifying.
