avoid generalization inside of aliases
The basic idea of this PR is that we don't generalize aliases when the instantiation could fail later on, either due to the *occurs check* or because of a universe error. We instead replace the whole alias with an inference variable and emit a nested `AliasRelate` goal. This `AliasRelate` then fully normalizes the alias before equating it with the inference variable, at which point the alias can be treated like any other rigid type.
We now treat aliases differently depending on whether they are *rigid* or not. To detect whether an alias is rigid we check whether `NormalizesTo` fails. While we already do so inside of `AliasRelate` anyways, also doing so when instantiating a query response would be both ugly/difficult and likely inefficient. To avoid that I change `instantiate_and_apply_query_response` to relate types completely structurally. This change generally removes a lot of annoying complexity, which is nice. It's implemented by adding a flag to `Equate` to change it to structurally handle aliases.
We currently always apply constraints from canonical queries right away. By providing all the necessary information to the canonical query, we can guarantee that instantiating the query response never fails, which further simplifies the implementation. This does add the invariant that *any information which could cause instantiating type variables to fail must also be available inside of the query*.
While it's acceptable for canonicalization to result in more ambiguity, we must not cause the solver to incompletely structurally relate aliases by erasing information. This means we have to be careful when merging universes during canonicalization. As we only generalize for type and const variables we have to make sure that anything nameable by such a type or const variable inside of the canonical query is also nameable outside of it. Because of this we both stop merging universes of existential variables when canonicalizing inputs, we put all uniquified regions into a higher universe which is not nameable by any type or const variable.
I will look into always replacing aliases with inference variables when generalizing in a later PR unless the alias references bound variables. This should both pretty much fix https://github.com/rust-lang/trait-system-refactor-initiative/issues/4. This may allow us to merge the universes of existential variables again by changing generalize to not consider their universe when deciding whether to generalize aliases. This requires some additional non-trivial changes to alias-relate, so I am leaving that as future work.
Fixes https://github.com/rust-lang/trait-system-refactor-initiative/issues/79. While it would be nice to decrement universe indices when existing a `forall`, that was surprisingly difficult and not necessary to fix this issue. I am really happy with the approach in this PR think it is the correct way forward to also fix the remaining cases of https://github.com/rust-lang/trait-system-refactor-initiative/issues/8.
only checking whether nested goals hold means that we don't consider
their inference constraints. Given that we now emit `AliasRelate` when relating
aliases and infer vars, this previously resulted in an "unconstrained" inference var
in `coerce_unsized`.
Fix more #121208 fallout (round 3)
#121208 converted lots of delayed bugs to bugs. Unsurprisingly, there were a few invalid conversion found via fuzzing.
r? `@lcnr`
Correctly handle if rustdoc JS script hash changed
It's something that annoyed me for quite some time: I have nightly docs open (for both std and compiler). And often, I don't look at the page for some days. Then when I come back to it, I make a search... except nothing happens. Took me a while to figure out that it was because the hash of one of the JS files we load for the search (either `search.js` or `search-index.js`) was updated in the meantime, preventing the search to be done. To go around it, I added to press `ENTER` to make the form submitted (which would reload the same page but with the correct hashes this time and the search being run).
r? `@notriddle`
Don't unnecessarily change `SIGPIPE` disposition in `unix_sigpipe` tests
In `auxiliary/sigpipe-utils.rs`, all we want to know is the current `SIGPIPE` disposition. We should not change it. So use `libc::sigaction` instead of `libc::signal`. That way we can also remove the code that restores it.
Part of https://github.com/rust-lang/rust/issues/97889.
Split Diagnostics for Uncommon Codepoints: Add Individual Identifier Types
This pull request further modifies the `uncommon_codepoints` lint, adding the individual identifier types of `Technical`, `Not_NFKC`, `Exclusion` and `Limited_Use` to the diagnostic message.
Example rendered diagnostic:
```
error: identifier contains a Unicode codepoint that is not used in normalized strings: 'ij'
--> $DIR/lint-uncommon-codepoints.rs:6:4
|
LL | fn dijkstra() {}
| ^^^^^^^
= note: this character is included in the Not_NFKC Unicode general security profile
```
Second step of #120228.
Allow tests to specify a `//@ filecheck-flags:` header
This allows individual codegen/assembly/mir-opt tests to pass extra flags to the LLVM `filecheck` tool as needed.
---
The original motivation was noticing that `tests/run-make/instrument-coverage` was very close to being an ordinary codegen test, except that it needs some extra logic to set up platform-specific variables to be passed into filecheck.
I then saw the comment in `verify_with_filecheck` indicating that a `filecheck-flags` header might be useful for other purposes as well.
Add `StructurallyRelateAliases` to allow instantiating infer vars with rigid aliases.
Change `instantiate_query_response` to be infallible in the new solver. This requires canonicalization to not hide any information used by the query, so weaken
universe compression. It also modifies `term_is_fully_unconstrained` to allow
region inference variables in a higher universe.
Always use WaitOnAddress on Win10+
`WaitOnAddress` and `WakeByAddressSingle` are always available since Windows 8 so they can now be used without needing to delay load. I've also moved the Windows 7 thread parking fallbacks into a separate sub-module.
Improvements to building and CI for mingw/msys
I was getting error messages when trying to follow the build instructions the mingw build for Rust, and managed to track the issue down to an incomparability of Rust's bootstrap program with MSYS2's version of git. Essentially, the problem is that MSYS2's git works in emulated unix-y paths, but bootstrap expects a Windows path. I found a workaround for this by using relative paths instead of absolute paths.
Along with that fix, this PR also updates the build instructions for MinGW to be compatible with modern versions of MSYS2, and some changes to CI to make sure that MSYS2's version of git is tested. In particular, I'm suggesting using the [MSYS2 github action](https://github.com/marketplace/actions/setup-msys2) specially made for this purpose, which is much less hacky than the old approach and gives us more control of what packages are installed. I also cleaned up as many alternate versions of key tools as I could find from PATH, to avoid accidental usage, and cleaned up some abuses of the `CUSTOM_MINGW` environment variable.
This fixes https://github.com/rust-lang/rust/issues/105696 and fixes https://github.com/rust-lang/rust/issues/117567
Make most bootstrap step types !Copy
This makes all bootstrap types except for `Compiler` and `TargetSelection` `!Copy`. This makes it easier to modify them by adding !Copy types in the future, something that `@saethlin` has complained about before, and comes at no cost of code clarity, the impls were completely unused.
Making `Compiler` and `TargetSelection` `!Copy` (which would allow getting rid of interning) is highly nontrivial as they are used and copied **all over the place**. This should hopefully get most of the benefits.
Fix sgx unit test compilation
Fixes a compilation error:
```
error[E0583]: file not found for module `tests`
--> library/std/src/sys/locks/rwlock/sgx.rs:2:1
|
2 | mod tests;
| ^^^^^^^^^^
|
= help: to create the module `tests`, create file "library/std/src/sys/locks/rwlock/sgx/tests.rs" or "library/std/src/sys/locks/rwlock/sgx/tests/mod.rs"
= note: if there is a `mod tests` elsewhere in the crate already, import it with `use crate::...` instead
For more information about this error, try `rustc --explain E0583`.
error: could not compile `std` (lib test) due to 1 previous error`
```
When running command:
```
`TF_BUILD=True RUST_TEST_THREADS=1 ./x.py test --stage 1 "library/std" tests/assembly tests/run-make --target=x86_64-fortanix-unknown-sgx --no-doc --exclude src/tools/linkchecker --exclude src/tools/rust-demangler --no-fail-fast 2>&1
```
The fix is done by moving a file to the location suggested by the compiler.
The issue was introduced by PR: https://github.com/rust-lang/rust/pull/121177
Prevent cycle in implied predicates computation
Makes #65913 from hang -> fail. I believe fail is the correct state for this test to remain for the long term.
Add newtypes for bool fields/params/return types
Fixed all the cases of this found with some simple searches for `*/ bool` and `bool /*`; probably many more
Stabilize `cfg_target_abi`
This stabilizes the `cfg` option called `target_abi`:
```rust
#[cfg(target_abi = "eabihf")]
```
Tracking issue: #80970fixes#78791resolves#80970
Windows: Use ProcessPrng for random keys
Windows 10 introduced [`ProcessPrng`](https://learn.microsoft.com/en-us/windows/win32/seccng/processprng) for random number generation. This allows us to replace the overly complicated (and prone to failure) `BCryptGenRandom` with a documented function.
For the tier 3 Windows 7 target, we simply use the older `RtlGenRandom`, which is undocumented. It should be fine even on modern systems (for comparability reasons) as it's just a wrapper for `ProcessPrng`. However, it does require loading an extra intermediary DLL which we can avoid when we know we have Windows 10+.
speed up `x install` by skipping archiving and compression
Performing archiving and compression on `x install` is nothing more than a waste of time and resources. Additionally, for systems like gentoo(which uses `x install`) this should be highly beneficial.
[benchmark report](https://github.com/rust-lang/rust/pull/118724#issuecomment-1848964908)
Resolves#109308
r? Mark-Simulacrum (I think you want to review this, feel free to change it if otherwise.)
Implement `MappedMutexGuard`, `MappedRwLockReadGuard`, and `MappedRwLockWriteGuard`.
ACP: https://github.com/rust-lang/libs-team/issues/260
Tracking issue: https://github.com/rust-lang/rust/issues/117108
<details> <summary> (Outdated) </summary>
`MutexState`/`RwLockState` structs
~~Having `sys::(Mutex|RwLock)` and `poison::Flag` as separate fields in the `Mutex`/`RwLock` would require `MappedMutexGuard`/`MappedRwLockWriteGuard` to hold an additional pointer, so I combined the two fields into a `MutexState`/`RwLockState` struct. This should not noticeably affect perf or layout, but requires an additional field projection when accessing the former `.inner` or `.poison` fields (now `.state.inner` and `.state.poison`).~~ If this is not desired, then `MappedMutexGuard`/`MappedRwLockWriteGuard` can instead hold separate pointers to the two fields.
</details>
The doc-comments are mostly copied from the existing `*Guard` doc-comments, with some parts from `lock_api::Mapped*Guard`'s doc-comments.
Unresolved question: Are more tests needed?
Add `#[rustc_no_mir_inline]` for standard library UB checks
should help with #121110 and also with #120848
Because the MIR inliner cannot know whether the checks are enabled or not, so inlining is an unnecessary compile time pessimization when debug assertions are disabled. LLVM knows whether they are enabled or not, so it can optimize accordingly without wasting time.
r? `@saethlin`
