When constant evaluation fails because its MIR is tainted by errors,
suppress note indicating that erroneous constant was used, since those
errors have to be fixed regardless of the constant being used or not.
Shrink `SelectionError` a lot
`SelectionError` used to be 80 bytes (on 64 bit). That's quite big. Especially because the selection cache contained `Result<_, SelectionError>. The Ok type is only 32 bytes, so the 80 bytes significantly inflate the size of the cache.
Most variants of the `SelectionError` seem to be hard errors, only `Unimplemented` shows up in practice (for cranelift-codegen, it occupies 23.4% of all cache entries). We can just box away the biggest variant, `OutputTypeParameterMismatch`, to get the size down to 16 bytes, well within the size of the Ok type inside the cache.
This trait ref is derived from the self type and then equated to the
trait ref from the obligation.
For example, for `fn(): Fn(u32)`, `self_ty_trait_ref` is `Fn()`, which
is then equated to `Fn(u32)` (which will fail, causing the obligation to
fail).
`SelectionError` used to be 80 bytes (on 64 bit). That's quite big.
Especially because the selection cache contained `Result<_,
SelectionError>. The Ok type is only 32 bytes, so the 80 bytes
significantly inflate the size of the cache.
Most variants of the `SelectionError` seem to be hard errors, only
`Unimplemented` shows up in practice (for cranelift-codegen, it occupies
23.4% of all cache entries). We can just box away the biggest variant,
`OutputTypeParameterMismatch`, to get the size down to 16 bytes, well
within the size of the Ok type inside the cache.
Min specialization improvements
- Don't allow specialization impls with no items, such implementations are probably not correct and only occur as mistakes in the compiler and standard library
- Fix a missing normalization call
- Adds spans for lifetime errors from overly general specializations
Closes#79457Closes#109815
Introduce `AliasKind::Inherent` for inherent associated types
Allows us to check (possibly generic) inherent associated types for well-formedness.
Type inference now also works properly.
Follow-up to #105961. Supersedes #108430.
Fixes#106722.
Fixes#108957.
Fixes#109768.
Fixes#109789.
Fixes#109790.
~Not to be merged before #108860 (`AliasKind::Weak`).~
CC `@jackh726`
r? `@compiler-errors`
`@rustbot` label T-types F-inherent_associated_types
Support return-type bounds on associated methods from supertraits
Support `T: Trait<method(): Bound>` when `method` comes from a supertrait, aligning it with the behavior of associated type bounds (both equality and trait bounds).
The only wrinkle is that I have to extend `super_predicates_that_define_assoc_type` to look for *all* items, not just `AssocKind::Ty`. This will also be needed to support `feature(associated_const_equality)` as well, which is subtly broken when it comes to supertraits, though this PR does not fix those yet. There's a slight chance there's a perf regression here, in which case I guess I could split it out into a separate query.
Use fulfillment to check `Drop` impl compatibility
Use an `ObligationCtxt` to ensure that a `Drop` impl does not have stricter requirements than the ADT that it's implemented for, rather than using a `SimpleEqRelation` to (more or less) syntactically equate predicates on an ADT with predicates on an impl.
r? types
### Some background
The old code reads:
```rust
// An earlier version of this code attempted to do this checking
// via the traits::fulfill machinery. However, it ran into trouble
// since the fulfill machinery merely turns outlives-predicates
// 'a:'b and T:'b into region inference constraints. It is simpler
// just to look for all the predicates directly.
```
I'm not sure what this means, but perhaps in the 8 years since that this comment was written (cc #23638) it's gotten easier to process region constraints after doing fulfillment? I don't know how this logic differs from anything we do in the `compare_impl_item` module. Ironically, later on it says:
```rust
// However, it may be more efficient in the future to batch
// the analysis together via the fulfill (see comment above regarding
// the usage of the fulfill machinery), rather than the
// repeated `.iter().any(..)` calls.
```
Also:
* Removes `SimpleEqRelation` which was far too syntactical in its relation.
* Fixes#110557
Implement negative bounds for internal testing purposes
Implements partial support the `!` negative polarity on trait bounds. This is incomplete, but should allow us to at least be able to play with the feature.
Not even gonna consider them as a public-facing feature, but I'm implementing them because would've been nice to have in UI tests, for example in #110671.
Currently a `{D,Subd}iagnosticMessage` can be created from any type that
impls `Into<String>`. That includes `&str`, `String`, and `Cow<'static,
str>`, which are reasonable. It also includes `&String`, which is pretty
weird, and results in many places making unnecessary allocations for
patterns like this:
```
self.fatal(&format!(...))
```
This creates a string with `format!`, takes a reference, passes the
reference to `fatal`, which does an `into()`, which clones the
reference, doing a second allocation. Two allocations for a single
string, bleh.
This commit changes the `From` impls so that you can only create a
`{D,Subd}iagnosticMessage` from `&str`, `String`, or `Cow<'static,
str>`. This requires changing all the places that currently create one
from a `&String`. Most of these are of the `&format!(...)` form
described above; each one removes an unnecessary static `&`, plus an
allocation when executed. There are also a few places where the existing
use of `&String` was more reasonable; these now just use `clone()` at
the call site.
As well as making the code nicer and more efficient, this is a step
towards possibly using `Cow<'static, str>` in
`{D,Subd}iagnosticMessage::{Str,Eager}`. That would require changing
the `From<&'a str>` impls to `From<&'static str>`, which is doable, but
I'm not yet sure if it's worthwhile.
Add `ConstParamTy` trait
This is a bit sketch, but idk.
r? `@BoxyUwU`
Yet to be done:
- [x] ~~Figure out if it's okay to implement `StructuralEq` for primitives / possibly remove their special casing~~ (it should be okay, but maybe not in this PR...)
- [ ] Maybe refactor the code a little bit
- [x] Use a macro to make impls a bit nicer
Future work:
- [ ] Actually™ use the trait when checking if a `const` generic type is allowed
- [ ] _Really_ refactor the surrounding code
- [ ] Refactor `marker.rs` into multiple modules for each "theme" of markers
Tweak await span to not contain dot
Fixes a discrepancy between method calls and await expressions where the latter are desugared to have a span that *contains* the dot (i.e. `.await`) but method call identifiers don't contain the dot. This leads to weird suggestions suggestions in borrowck -- see linked issue.
Fixes#110761
This mostly touches a bunch of tests to tighten their `await` span.
Clear response values for overflow in new solver
When we have an overflow, return a trivial query response. This fixes an ICE with the code described in #110544:
```rust
trait Trait {}
struct W<T>(T);
impl<T, U> Trait for W<(W<T>, W<U>)>
where
W<T>: Trait,
W<U>: Trait,
{}
fn impls<T: Trait>() {}
fn main() {
impls::<W<_>>()
}
```
Where, while proving `W<?0>: Trait`, we overflow but still apply the query response of `?0 = (W<?1>, W<?2>)`. Then while re-processing the query to validate that our evaluation result was stable, we get a different query response that looks like `?1 = (W<?3>, W<?4>), ?2 = (W<?5>, W<?6>)`, and so we trigger the ICE.
Also, by returning a trivial query response we also avoid the infinite-loop/OOM behavior of the old solver.
r? ``@lcnr``
Consider polarity in new solver
It's kinda ugly to have a polarity check in all of the builtin impls -- I guess I could consider the polarity at the top of assemble-builtin but that would require adding a polarity fn to `GoalKind`...
🤷 putting this up just so i dont forget, since it's needed to bootstrap core during coherence (this alone does not allow core to bootstrap though, additional work is needed!)
r? ``@lcnr``
Switch to `EarlyBinder` for `explicit_item_bounds`
Part of the work to finish https://github.com/rust-lang/rust/issues/105779.
This PR adds `EarlyBinder` to the return type of the `explicit_item_bounds` query and removes `bound_explicit_item_bounds`.
r? `@compiler-errors` (hope it's okay to request you, since you reviewed #110299 and #110498😃)
Break up long function in trait selection error reporting + clean up nearby code
- Move blocks of code into their own functions
- Replace a few function argument types with their type aliases
- Create "AppendConstMessage" enum to replace a nested `Option`.
Allow to feed a value in another query's cache and remove `WithOptConstParam`
I used it to remove `WithOptConstParam` queries, as an example.
The idea is that a query (here `typeck(function)`) can write into another query's cache (here `type_of(anon const)`). The dependency node for `type_of` would depend on all the current dependencies of `typeck`.
There is still an issue with cycles: if `type_of(anon const)` is accessed before `typeck(function)`, we will still have the usual cycle. The way around this issue is to `ensure` that `typeck(function)` is called before accessing `type_of(anon const)`.
When replayed, we may the following cases:
- `typeck` is green, in that case `type_of` is green too, and all is right;
- `type_of` is green, `typeck` may still be marked as red (it depends on strictly more things than `type_of`) -> we verify that the saved value and the re-computed value of `type_of` have the same hash;
- `type_of` is red, then `typeck` is red -> it's the caller responsibility to ensure `typeck` is recomputed *before* `type_of`.
As `anon consts` have their own `DefPathData`, it's not possible to have the def-id of the anon-const point to something outside the original function, but the general case may have to be resolved before using this device more broadly.
There is an open question about loading from the on-disk cache. If `typeck` is loaded from the on-disk cache, the side-effect does not happen. The regular `type_of` implementation can go and fetch the correct value from the decoded `typeck` results, and the dep-graph will check that the hashes match, but I'm not sure we want to rely on this behaviour.
I specifically allowed to feed the value to `type_of` from inside a call to `type_of`. In that case, the dep-graph will check that the fingerprints of both values match.
This implementation is still very sensitive to cycles, and requires that we call `typeck(function)` before `typeck(anon const)`. The reason is that `typeck(anon const)` calls `type_of(anon const)`, which calls `typeck(function)`, which feeds `type_of(anon const)`, and needs to build the MIR so needs `typeck(anon const)`. The latter call would not cycle, since `type_of(anon const)` has been set, but I'd rather not remove the cycle check.
Add `rustc_fluent_macro` to decouple fluent from `rustc_macros`
Fluent, with all the icu4x it brings in, takes quite some time to compile. `fluent_messages!` is only needed in further downstream rustc crates, but is blocking more upstream crates like `rustc_index`. By splitting it out, we allow `rustc_macros` to be compiled earlier, which speeds up `x check compiler` by about 5 seconds (and even more after the needless dependency on `serde_json` is removed from `rustc_data_structures`).
Switch to `EarlyBinder` for `collect_return_position_impl_trait_in_trait_tys`
Part of the work to finish https://github.com/rust-lang/rust/issues/105779.
This PR adds `EarlyBinder` to the return type of the `collect_return_position_impl_trait_in_trait_tys` query and removes `bound_return_position_impl_trait_in_trait_tys`.
r? `@lcnr`
Fluent, with all the icu4x it brings in, takes quite some time to
compile. `fluent_messages!` is only needed in further downstream rustc
crates, but is blocking more upstream crates like `rustc_index`. By
splitting it out, we allow `rustc_macros` to be compiled earlier, which
speeds up `x check compiler` by about 5 seconds (and even more after the
needless dependency on `serde_json` is removed from
`rustc_data_structures`).
Various minor Idx-related tweaks
Nothing particularly exciting here, but a couple of things I noticed as I was looking for more index conversions to simplify.
cc https://github.com/rust-lang/compiler-team/issues/606
r? `@WaffleLapkin`
Remove `TypeSuper{Foldable,Visitable}` impls for `Region`.
These traits exist so that folders/visitors can recurse into types of interest: binders, types, regions, predicates, and consts. But `Region` is non-recursive and cannot contain other types of interest, so its methods in these traits are trivial.
This commit inlines and removes those trivial methods.
r? `@compiler-errors`
Remove `remap_env_constness` in queries
This removes some of the complexities with const traits. #88119 used to be caused by this but was fixed by `param_env = param_env.without_const()`.
These traits exist so that folders/visitors can recurse into types of
interest: binders, types, regions, predicates, and consts. But `Region`
is non-recursive and cannot contain other types of interest, so its
methods in these traits are trivial.
This commit inlines and removes those trivial methods.
Switch to `EarlyBinder` for `impl_subject` query
Part of the work to finish https://github.com/rust-lang/rust/issues/105779.
Several queries `X` have a `bound_X` variant that wraps the output in `EarlyBinder`. This adds `EarlyBinder` to the return type of the `impl_subject` query and removes `bound_impl_subject`.
r? ```@lcnr```
don't uniquify regions when canonicalizing
uniquifying causes a bunch of issues, most notably it causes `AliasEq(<?x as Trait<'a>>::Assoc, <?x as Trait<'a>>::Assoc)` to result in ambiguity because both `normalizes-to` paths result in ambiguity and substs equate should trivially succeed but doesn't because we uniquified `'a` to two different regions.
I originally added uniquification to make it easier to deal with requirement 6 from the dev-guide: https://rustc-dev-guide.rust-lang.org/solve/trait-solving.html#requirements
> ### 6. Trait solving must be (free) lifetime agnostic
>
> Trait solving during codegen should have the same result as during typeck. As we erase
> all free regions during codegen we must not rely on them during typeck. A noteworthy example
> is special behavior for `'static`.
cc https://github.com/rust-lang/rustc-dev-guide/pull/1671
Relying on regions being identical may cause ICE during MIR typeck, but even without this PR we can end up relying on that as type inference vars can resolve to types which contain an identical region. Let's land this and deal with any ICE that crop up as we go. Will look at this issue again before stabilization.
r? ```@compiler-errors```
Improve safe transmute error reporting
This patch updates the error reporting when Safe Transmute is not possible between 2 types by including the reason.
Also, fix some small bugs that occur when computing the `Answer` for transmutability.
This patch updates the error reporting when Safe Transmute is not
possible between 2 types by including the reason.
Also, fix some small bugs that occur when computing the `Answer` for
transmutability.
Check for body owner fallibly in error reporting
Sometimes the "body id" we use for an obligation cause is not actually a body owner, like when we're doing WF checking on items.
Fixes#110157
cleanup our region error API
- require `TypeErrCtxt` to always result in an error, closing #108810
- move `resolve_regions_and_report_errors` to the `ObligationCtxt`
- call `process_registered_region_obligations` in `resolve_regions`
- move `resolve_regions` into the `outlives` submodule
- add `#[must_use]` to functions returning lists of errors
r? types
I'm surprised the compiler doesn't warn about these. It appears having
an `impl` on a struct is enough to avoid a warning about it never being
constructed.
Split implied and super predicate queries, then allow elaborator to filter only supertraits
Split the `super_predicates_of` query into a new `implied_predicates_of` query. The former now only returns the *real* supertraits of a trait alias, and the latter now returns the implied predicates (which include all of the `where` clauses of the trait alias). The behavior of these queries is identical for regular traits.
Now that the two queries are split, we can add a new filter method to the elaborator, `filter_only_self()`, which can be used in instances that we need only the *supertrait* predicates, such as during the elaboration used in closure signature deduction. This toggles the usage of `super_predicates_of` instead of `implied_predicates_of` during elaboration of a trait predicate.
This supersedes #104745, and fixes the four independent bugs identified in that PR.
Fixes#104719Fixes#106238Fixes#110023Fixes#109514
r? types
- require `TypeErrCtxt` to always result in an error
- move `resolve_regions_and_report_errors` to the `ObligationCtxt`
- merge `process_registered_region_obligations` into `resolve_regions`
Support safe transmute in new solver
Basically copies the same implementation as the old solver, but instead of looking for param types, we look for type or const placeholders.
Enforce that `PointerLike` requires a pointer-like ABI
At least temporarily, let's ban coercing things that are pointer-sized and pointer-aligned but *not* `Abi::Scalar(..)` into `dyn*`. See: https://github.com/rust-lang/rust/pull/104694#discussion_r1142522073
This can be lifted in the future if we decie that we *want* to be able to coerce something `repr(C)` into a `dyn*`, but we'll have to figure out what to do with Miri and codegen...
r? compiler
Make elaboration generic over input
Combines all the `elaborate_*` family of functions into just one, which is an iterator over the same type that you pass in (e.g. elaborating `Predicate` gives `Predicate`s, elaborating `Obligation`s gives `Obligation`s, etc.)
Implement support for `GeneratorWitnessMIR` in new solver
r? ```@cjgillot```
I mostly want this to cut down the number of failing UI tests when running the UI test suite with `--compare-mode=next-solver`, but there doesn't seem like much reason to block implementing this since it adds minimal complexity to the existing structural traits impl in the new solver.
If others are against adding this for some reason, then maybe we should just make `GeneratorWitnessMIR` return `NoSolution` for these traits. Anything but an ICE please 😸🧊
Tweak debug outputs to make debugging new solver easier
1. Move the fields that are "most important" (I know this is subjective) to the beginning of the structs.
For goals, I typically care more about the predicate than the param-env (which is significantly longer in debug output).
For canonicalized things, I typically care more about what is *being* canonicalized.
For a canonical response, I typically care about the response -- or at least, it's typically useful to put it first since it's short and affects the whether the solver recurses or not...
2. Add some more debug and instrument calls to functions to add more structure to tracing lines.
r? `@oli-obk` or `@BoxyUwU` (since I think `@lcnr` is on holiday)
Remove `intercrate` and `mark_ambiguous` from `TypeRelation`
Fixes#109863
Pulls this logic into `super_combine_tys`, which has access to `InferCtxt` and takes a `ObligationEmittingRelation` -- both of which simplify the logic here.
r? `@oli-obk` `@aliemjay`
This solves a regression where `0.0.cmp()` was ambiguous when a custom
trait with a `cmp` method was in scope.
FOr integers it shouldn't be a problem in practice so I wasn't able to
add a test.
Update `ty::VariantDef` to use `IndexVec<FieldIdx, FieldDef>`
And while doing the updates for that, also uses `FieldIdx` in `ProjectionKind::Field` and `TypeckResults::field_indices`.
There's more places that could use it (like `rustc_const_eval` and `LayoutS`), but I tried to keep this PR from exploding to *even more* places.
Part 2/? of https://github.com/rust-lang/compiler-team/issues/606
Closures always implement `FnOnce` in new solver
We should process `[closure]: FnOnce(Tys...) -> Ty` obligations *before* fallback and closure analysis. We can do this by taking advantage of the fact that `FnOnce` is always implemented by closures, even before we definitely know the closure kind.
Fixescompiler-errors/next-solver-hir-issues#15
r? ``@oli-obk`` (trying to spread the reviewer load for new trait solver prs, and this one is pretty self-contained, though feel free to reassign 😸)
Freshen normalizes-to hack goal RHS in the evaluate loop
Ensure that we repeatedly equate the unconstrained RHS of the normalizes-to hack goal with the *actual* RHS of the goal, even if the normalizes-to goal loops several times and thus we replace the unconstrained RHS var repeatedly.
Alternative to #109583.
And while doing the updates for that, also uses `FieldIdx` in `ProjectionKind::Field` and `TypeckResults::field_indices`.
There's more places that could use it (like `rustc_const_eval` and `LayoutS`), but I tried to keep this PR from exploding to *even more* places.
Part 2/? of https://github.com/rust-lang/compiler-team/issues/606
Canonicalize float var as float in new solver
Typo in new canonicalizer -- we should be canonicalizing float vars as `CanonicalTyVarKind::Float`, not `CanonicalTyVarKind::Int`.
Fixescompiler-errors/next-solver-hir-issues#9
Don't ICE on `DiscriminantKind` projection in new solver
As title says, since we now actually call `Ty::discriminant_kind` on placeholder types 😃
Also drive-by simplify `Pointee::Metadata` projection logic, and fix the UI test because the `<T as Pointee>::Metadata` tests weren't actually exercising the new projection logic, since we still eagerly normalize (which hits `project.rs` in the old solver) in HIR typeck.
r? `@lcnr` tho feel free to re-roll, this pr is very low-priority and not super specific to the new trait solver.
Fixescompiler-errors/next-solver-hir-issues#14
Do not consider elaborated projection predicates for objects in new solver
Object types have projection bounds which are elaborated during astconv. There's no need to do it again for projection goals, since that'll give us duplicate projection candidatesd that are distinct up to regions due to the fact that we canonicalize every region to a separate variable. See quick example below the break for a better explanation.
Discussed this with lcnr, and adding a stop-gap until we get something like intersection region constraints (or modify canonicalization to canonicalize identical regions to the same canonical regions) -- after which, this will hopefully not matter and may be removed.
r? `@lcnr`
---
See `tests/ui/traits/new-solver/more-object-bound.rs`:
Consider a goal: `<dyn Iter<'a, ()> as Iterator>::Item = &'a ()`.
After canonicalization: `<dyn Iter<'!0r, (), Item = '!1r ()> as Iterator>::Item == &!'2r ()`
* First object candidate comes from the item bound in the dyn's bounds itself, giving us `<dyn Iter<'!0r, (), Item = '?!r ()> as Iterator>::Item == &!'1r ()`. This gives us one region constraint: `!'1r == !'2r`.
* Second object candidate comes from elaborating the principal trait ref, gives us `<dyn Iter<'!0r, (), Item = '!1r ()> as Iterator>::Item == &!'0r ()`. This gives us one region constraint: `!'0r == !'2r`.
* Oops! Ambiguity!
Rename `IndexVec::last` → `last_index`
As I've been trying to replace a `Vec` with an `IndexVec`, having `last` exist on both but returning very different types makes the transition a bit awkward -- the errors are later, where you get things like "there's no `ty` method on `mir::Field`" rather than a more localized error like "hey, there's no `last` on `IndexVec`".
So I propose renaming `last` to `last_index` to help distinguish `Vec::last`, which returns an element, and `IndexVec::last_index`, which returns an index.
(Similarly, `Iterator::last` also returns an element, not an index.)
Check for overflow in `assemble_candidates_after_normalizing_self_ty`
Prevents a stack overflow (⚠️❗) in the new solver when we have param-env candidates that look like: `T: Trait<Assoc = <T as Trait>::Assoc>`
The current error message looks bad, but that's because we don't distinguish overflow and other ambiguity errors. I'll break that out into a separate PR since the fix may be controversial.
r? `@lcnr`
As I've been trying to replace a `Vec` with an `IndexVec`, having `last` exist on both but returning very different types makes the transition a bit awkward -- the errors are later, where you get things like "there's no `ty` method on `mir::Field`" rather than a more localized error like "hey, there's no `last` on `IndexVec`".
So I propose renaming `last` to `last_index` to help distinguish `Vec::last`, which returns an element, and `IndexVec::last_index`, which returns an index.
(Similarly, `Iterator::last` also returns an element, not an index.)
Rollup of 8 pull requests
Successful merges:
- #91793 (socket ancillary data implementation for FreeBSD (from 13 and above).)
- #92284 (Change advance(_back)_by to return the remainder instead of the number of processed elements)
- #102472 (stop special-casing `'static` in evaluation)
- #108480 (Use Rayon's TLV directly)
- #109321 (Erase impl regions when checking for impossible to eagerly monomorphize items)
- #109470 (Correctly substitute GAT's type used in `normalize_param_env` in `check_type_bounds`)
- #109562 (Update ar_archive_writer to 0.1.3)
- #109629 (remove obsolete `givens` from regionck)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Add a builtin `FnPtr` trait that is implemented for all function pointers
r? `@ghost`
Rebased version of https://github.com/rust-lang/rust/pull/99531 (plus adjustments mentioned in the PR).
If perf is happy with this version, I would like to land it, even if the diagnostics fix in 9df8e1befb5031a5bf9d8dfe25170620642d3c59 only works for `FnPtr` specifically, and does not generally improve blanket impls.
stop special-casing `'static` in evaluation
fixes#102360
I have no idea whether this actually removed all places where `'static` matters. Without canonicalization it's very easy to accidentally rely on `'static` again. Blocked on changing the `order_dependent_trait_objects` future-compat lint to a hard error
r? `@nikomatsakis`
Don't elaborate non-obligations into obligations
It's suspicious to elaborate a `PolyTraitRef` or `Predicate` into an `Obligation`, since the former does not have a param-env associated with it, but the latter does. This is a footgun that, while not being misused *currently* in the compiler, easily could be misused by someone less familiar with the elaborator's inner workings.
This PR just changes the API -- ideally, the elaborator wouldn't even have to deal with obligations if we're not elaborating obligations, but that would require a bit more abstraction than I could be bothered with today.
Implement non-const `Destruct` trait in new solver
Makes it so that we can call stdlib methods like `Option::map` in **non-const** environments, since *many* stdlib methods have `Destruct` bounds 😅
This doesn't bother to implement `const Destruct` yet, but it shouldn't be too hard to do so. Just didn't bother since we already don't have much support for const traits in the new solver anyways. I'd be happy to add skeleton support for `const Destruct`, though, if the reviewer desires.
Rollup of 9 pull requests
Successful merges:
- #108629 (rustdoc: add support for type filters in arguments and generics)
- #108924 (panic_immediate_abort requires abort as a panic strategy)
- #108961 (Refine error spans for const args in hir typeck)
- #108986 (sync LVI tests)
- #109142 (Add block-based mutex unlocking example)
- #109368 (fix typo in the creation of OpenOption for RustyHermit)
- #109493 (Return nested obligations from canonical response var unification)
- #109515 (Add AixLinker to support linking on AIX)
- #109536 (resolve: Rename some cstore methods to match queries and add comments)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Return nested obligations from canonical response var unification
Handle alias-eq obligations being emitted from `instantiate_and_apply_query_response` in:
* `EvalCtxt` - by processing the nested obligations in the next loop by `new_goals`
* `FulfillCtxt` - by adding the nested obligations to the fulfillment's pending obligations
* `InferCtxt::evaluate_obligation` - ~~by returning `EvaluationResult::EvaluatedToAmbig` (boo 👎, see the FIXME)~~ same behavior as above, since we use fulfillment and `select_where_possible`
The only one that's truly sketchy is `evaluate_obligation`, but it's not hard to modify this behavior moving forward.
From #109037, I think a smaller repro could be crafted if I were smarter, but I am not, so I just took this from #105878.
r? `@lcnr` cc `@BoxyUwU`
Refine error spans for const args in hir typeck
Improve just a couple of error messages having to do with mismatched consts.
r? `@ghost` i'll put this up when the dependent commits are merged
Rollup of 7 pull requests
Successful merges:
- #108541 (Suppress `opaque_hidden_inferred_bound` for nested RPITs)
- #109137 (resolve: Querify most cstore access methods (subset 2))
- #109380 (add `known-bug` test for unsoundness issue)
- #109462 (Make alias-eq have a relation direction (and rename it to alias-relate))
- #109475 (Simpler checked shifts in MIR building)
- #109504 (Stabilize `arc_into_inner` and `rc_into_inner`.)
- #109506 (make param bound vars visibly bound vars with -Zverbose)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Make alias-eq have a relation direction (and rename it to alias-relate)
Emitting an "alias-eq" is too strict in some situations, since we don't always want strict equality between a projection and rigid ty. Adds a relation direction.
* I could probably just reuse this [`RelationDir`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_infer/infer/combine/enum.RelationDir.html) -- happy to uplift that struct into middle and use that instead, but I didn't feel compelled to... 🤷
* Some of the matching in `compute_alias_relate_goal` is a bit verbose -- I guess I could simplify it by using [`At::relate`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_infer/infer/at/struct.At.html#method.relate) and mapping the relation-dir to a variance.
* Alternatively, I coulld simplify things by making more helper functions on `EvalCtxt` (e.g. `EvalCtxt::relate_with_direction(T, T)` that also does the nested goal registration). No preference.
r? ```@lcnr``` cc ```@BoxyUwU``` though boxy can claim it if she wants
NOTE: first commit is all the changes, the second is just renaming stuff
new solver cleanup + implement coherence
the cleanup:
- change `Certainty::unify_and` to consider ambig + overflow to be ambig
- rename `trait_candidate_should_be_dropped_in_favor_of` to `candidate_should_be_dropped_in_favor_of`
- remove outdated fixme
For coherence I mostly just add an ambiguous candidate if the current trait ref is unknowable. I am doing the same for reservation impl where I also just add an ambiguous candidate.
a general type system cleanup
removes the helper functions `traits::fully_solve_X` as they add more complexity then they are worth. It's confusing which of these helpers should be used in which context.
changes the way we deal with overflow to always add depth in `evaluate_predicates_recursively`. It may make sense to actually fully transition to not have `recursion_depth` on obligations but that's probably a bit too much for this PR.
also removes some other small - and imo unnecessary - helpers.
r? types
Do not suggest bounds restrictions for synthesized RPITITs
Before this PR we were getting ...
```
warning: the feature `async_fn_in_trait` is incomplete and may not be safe to use and/or cause compiler crashes
--> tests/ui/async-await/in-trait/missing-send-bound.rs:5:12
|
5 | #![feature(async_fn_in_trait)]
| ^^^^^^^^^^^^^^^^^
|
= note: see issue #91611 <https://github.com/rust-lang/rust/issues/91611> for more information
= note: `#[warn(incomplete_features)]` on by default
error: future cannot be sent between threads safely
--> tests/ui/async-await/in-trait/missing-send-bound.rs:17:20
|
17 | assert_is_send(test::<T>());
| ^^^^^^^^^^^ future returned by `test` is not `Send`
|
= help: within `impl Future<Output = ()>`, the trait `Send` is not implemented for `impl Future<Output = ()>`
note: future is not `Send` as it awaits another future which is not `Send`
--> tests/ui/async-await/in-trait/missing-send-bound.rs:13:5
|
13 | T::bar().await;
| ^^^^^^^^ await occurs here on type `impl Future<Output = ()>`, which is not `Send`
note: required by a bound in `assert_is_send`
--> tests/ui/async-await/in-trait/missing-send-bound.rs:21:27
|
21 | fn assert_is_send(_: impl Send) {}
| ^^^^ required by this bound in `assert_is_send`
help: consider further restricting the associated type
|
16 | fn test2<T: Foo>() where impl Future<Output = ()>: Send {
| ++++++++++++++++++++++++++++++++++++
error: aborting due to previous error; 1 warning emitted
```
and we want this output ...
```
warning: the feature `async_fn_in_trait` is incomplete and may not be safe to use and/or cause compiler crashes
--> $DIR/missing-send-bound.rs:5:12
|
LL | #![feature(async_fn_in_trait)]
| ^^^^^^^^^^^^^^^^^
|
= note: see issue #91611 <https://github.com/rust-lang/rust/issues/91611> for more information
= note: `#[warn(incomplete_features)]` on by default
error: future cannot be sent between threads safely
--> $DIR/missing-send-bound.rs:17:20
|
LL | assert_is_send(test::<T>());
| ^^^^^^^^^^^ future returned by `test` is not `Send`
|
= help: within `impl Future<Output = ()>`, the trait `Send` is not implemented for `impl Future<Output = ()>`
note: future is not `Send` as it awaits another future which is not `Send`
--> $DIR/missing-send-bound.rs:13:5
|
LL | T::bar().await;
| ^^^^^^^^ await occurs here on type `impl Future<Output = ()>`, which is not `Send`
note: required by a bound in `assert_is_send`
--> $DIR/missing-send-bound.rs:21:27
|
LL | fn assert_is_send(_: impl Send) {}
| ^^^^ required by this bound in `assert_is_send`
error: aborting due to previous error; 1 warning emitted
```
r? `@compiler-errors`
Only implement Fn* traits for extern "Rust" safe function pointers and items
Since calling the function via an `Fn` trait will assume `extern "Rust"` ABI and not do any safety checks, only safe `extern "Rust"` function can implement the `Fn` traits. This syncs the logic between the old solver and the new solver.
r? `@compiler-errors`
Constrain const vars to error if const types are mismatched
When equating two consts of different types, if either are const variables, constrain them to the correct const error kind.
This helps us avoid "successfully" matching a const against an impl signature but leaving unconstrained const vars, which will lead to incremental ICEs when we call const-eval queries during const projection.
Fixes#109296
The second commit in the stack fixes a regression in the first commit where we end up mentioning `[const error]` in an impl overlap error message. I think the error message changes for the better, but I could implement alternative strategies to avoid this without delaying the overlap error message...
r? `@BoxyUwU`
new solver: make all goal evaluation able to be automatically rerun
It is generally wrong to call `evaluate_goal` multiple times or `evaluate_goal` and `evaluate_all` for the same `QueryResult` without correctly handling rerunning the goals when inference makes progress. Not doing so will result in the assertion in `evaluate_goal` firing because rerunning the goal will lead to a more accurate `QueryResult`.
Currently there are lots of places that get this wrong and generally it is complex and error prone to handle correctly everywhere. This PR introduces a way to add goals to the `EvalCtxt` and then run all the added goals in a loop so that `evaluate_goal`/`evaluate_all` is not necessary to call manually.
There are a few complications for making everything work "right":
1. the `normalizes-to` hack that replaces the rhs with an unconstrained infer var requires special casing in the new `try_evaluate_added_goals` function similar to how `evaluate_goal`'s assertion special cases that hack.
2. `assemble_candidates_after_normalizing_self_ty`'s normalization step needs to be reran for each candidate otherwise the found candidates will potentially get a more accurate `QueryResult` when rerunning the projection/trait goal which can effect the `QueryResult` of the projection/trait goal.
This is implemented via `EvalCtxt::probe`'s closure's `EvalCtxt` inheriting the added goals of the `EvalCtxt` that `probe` is called on, allowing us to add goals in a probe, and then enter a nested probe for each candidate and evaluate added goals which include the normalization step's goals.
I made `make_canonical_response` evaluate added goals so that it will be hard to mess up the impl of the solver by forgetting to evaluate added goals. Right now the only way to mess this up would be to call `response_no_constraints` (which from the name is obviously weird).
The visibility of `evaluate_goal` means that it can be called from various `compute_x_goal` or candidate assembly functions, this is generally wrong and we should never call `evaluate_goal` manually, instead we should be calling `add_goal`/`add_goals`. This is solved by moving `evaluate_goal` `evaluate_canonical_goal` and `compute_goal` into `eval_ctxt`'s module and making them private so they cannot be called from elsewhere, forcing people to call `add_goal/s` and `evaluate_added_goals_and_make_canonical_resposne`/`try_evaluate_added_goals`
---
Other changes:
- removed the `&& false` that was introduced to the assertion in `evaluate_goal` in #108839
- remove a `!self.did_overflow()` requirement in `search_graph.is_empty()` which causes goals that overflow to ICE
- made `EvalCtxt::eq` take `&mut self` and add all the nested goals via `add_goals` instead of returning them as 99% of call sites just immediately called `EvalCtxt::add_goals` manually.
r? `````@lcnr`````
- only borrow the refcell once per loop
- avoid complex matches to reduce branch paths in the hot loop
- use a by-ref fast path that avoids mutations at the expense of having false negatives
Install projection from RPITIT to default trait method opaque correctly
1. For new lowering strategy `-Zlower-impl-trait-in-trait-to-assoc-ty`, install the correct default trait method projection predicates (RPITIT -> opaque). This makes default trait body tests pass!
2. Fix two WF-checking bugs -- first, we want to make sure that we're always looking for an opaque type in `check_return_position_impl_trait_in_trait_bounds`. That's because the RPITIT projections are normalized to opaques during wfcheck. Second, fix RPITIT's param-envs by not adding the projection predicates that we install on trait methods to make default RPITITs work -- I left a comment why.
3. Also, just a small drive-by for `rustc_on_unimplemented`. Not sure if it affects any tests, but can't hurt.
r? ````@spastorino,```` based off of #109140
Remove box expressions from HIR
After #108516, `#[rustc_box]` is used at HIR->THIR lowering and this is no longer emitted, so it can be removed.
This is based on top of #108471 to help with conflicts, so 43490488ccacd1a822e9c621f5ed6fca99959a0b is the only relevant commit (sorry for all the duplicated pings!)
````@rustbot```` label +S-blocked
Some cleanups in our normalization logic
Changed a match to be exhaustive and deduplicated some code.
r? ```@compiler-errors```
this pulls out the uncontroversial part of https://github.com/rust-lang/rust/pull/108860
make `define_opaque_types` fully explicit
based on the idea of #108389. Moved `define_opaque_types` into the actual operations, e.g. `eq`, instead of `infcx.at` because normalization doesn't use `define_opaque_types` and even creates it's own `At` with a different `define_opaque_types` internally.
Somewhat surprisingly, coherence actually relies on `DefineOpaqueTypes::Yes` for soundness which was revealed because I've incorrectly used `DefineOpaqueTypes::No` in `equate_impl_headers`. It feels concerning that even though this is the case, we still sometimes use `DefineOpaqueTypes::No` in coherence. I did not look into this as part of this PR as it is purely changing the structure of the code without changing behavior in any way.
r? ```@oli-obk```
Remove some direct calls to local_def_id_to_hir_id on diagnostics
Was playing with `tests/ui/impl-trait/in-trait/default-body-with-rpit.rs` and was able to remove some ICEs. Still getting ...
```
error[E0277]: `impl Future<Output = Foo::{opaque#0}>` is not a future
--> tests/ui/impl-trait/in-trait/default-body-with-rpit.rs:10:28
|
10 | async fn baz(&self) -> impl Debug {
| ^^^^^^^^^^ `impl Future<Output = Foo::{opaque#0}>` is not a future
|
= help: the trait `Future` is not implemented for `impl Future<Output = Foo::{opaque#0}>`
= note: impl Future<Output = Foo::{opaque#0}> must be a future or must implement `IntoFuture` to be awaited
note: required by a bound in `Foo::{opaque#1}`
--> tests/ui/impl-trait/in-trait/default-body-with-rpit.rs:10:28
|
10 | async fn baz(&self) -> impl Debug {
| ^^^^^^^^^^ required by this bound in `Foo::{opaque#1}`
error[E0277]: the size for values of type `impl Future<Output = Foo::{opaque#0}>` cannot be known at compilation time
--> tests/ui/impl-trait/in-trait/default-body-with-rpit.rs:10:28
|
10 | async fn baz(&self) -> impl Debug {
| ^^^^^^^^^^ doesn't have a size known at compile-time
|
= help: the trait `Sized` is not implemented for `impl Future<Output = Foo::{opaque#0}>`
note: required by a bound in `Foo::{opaque#1}`
--> tests/ui/impl-trait/in-trait/default-body-with-rpit.rs:10:28
|
10 | async fn baz(&self) -> impl Debug {
| ^^^^^^^^^^ required by this bound in `Foo::{opaque#1}`
error: internal compiler error: compiler/rustc_hir_typeck/src/closure.rs:724:18: async fn generator return type not an inference variable: Foo::{opaque#1}<'_>
--> tests/ui/impl-trait/in-trait/default-body-with-rpit.rs:10:39
|
10 | async fn baz(&self) -> impl Debug {
| _______________________________________^
11 | | ""
12 | | }
| |_____^
```
But I guess this is a little bit of progress anyway.
This one goes on top of #108700 and #108945
r? `@compiler-errors`
Remove `identity_future` indirection
This was previously needed because the indirection used to hide some unexplained lifetime errors, which it turned out were related to the `min_choice` algorithm.
Removing the indirection also solves a couple of cycle errors, large moves and makes async blocks support the `#[track_caller]`annotation.
Fixes https://github.com/rust-lang/rust/issues/104826.
Add suggestion to diagnostic when user has array but trait wants slice. (rebased)
Rebase of #91314, except for change to multipart suggestion
Resolves#90528
r? ``@compiler-errors`` since you requested the multipart suggestion
tidy: enforce comment blocks to have an even number of backticks
After PR #108694, most unmatched backticks in `compiler/` comments have been eliminated. This PR adds a tidy lint to ensure no new unmatched backticks are added, and either addresses the lint in the remaining instances it found, or allows it.
Very often, backtick containing sections wrap around lines, for example:
```Rust
// This function takes a tuple `(Vec<String>,
// Box<[u8]>)` and transforms it into `Vec<u8>`.
```
The lint is implemented to work on top of blocks, counting each line with a `//` into a block, and counting if there are an odd or even number of backticks in the entire block, instead of looking at just a single line.
This makes it easier to open the messages file while developing on features.
The commit was the result of automatted changes:
for p in compiler/rustc_*; do mv $p/locales/en-US.ftl $p/messages.ftl; rmdir $p/locales; done
for p in compiler/rustc_*; do sed -i "s#\.\./locales/en-US.ftl#../messages.ftl#" $p/src/lib.rs; done
Implement goal caching with the new solver
Maybe it's wrong, idk. Opening mostly for first impressions before I go to sleep.
r? ``@lcnr,`` cc ``@cjgillot``
Don't even try to combine consts with incompatible types
~I left a more detailed explanation for why this fixes this issue in the UI test, but in general, we should not try to unify const infer vars and rigid consts if they have incompatible types. That's because we don't want something like a `ConstArgHasType` predicate to suddenly go from passing to failing, or vice versa, due to a shallow resolve.~
1. Use the `type_of` for a parameter in `try_eval_lit_or_param`, instead of the "expected" type from a `WithOptConstParam` def id.
2. Don't combine consts that have incompatible types.
Fixes#108781
Do not ICE when we have fn pointer `Fn` obligations with bound vars in the self type
We never supported solving `for<'a> fn(&'a ()): Fn(&'a ())` -- I tried to add that support in #104929, but iirc `@lcnr` wanted to support this more generally by eagerly instantiating trait predicate binders with placeholders. That never happened due to blockers in the old solver, but we probably shouldn't ICE in any case.
On the bright side, this passes on the new solver :^)
Emit alias-eq when equating numeric var and projection
This doesn't fix everything having to do with projections and infer vars, but it does fix a common case I saw in HIR typeck.
r? `@lcnr`
Remove `body_def_id` from `Inherited`
We can just use the body id from the obligation cause.
Follow-up to #108945, only my commit is relevant.
r? `@cjgillot` cc `@spastorino`
Rollup of 8 pull requests
Successful merges:
- #108754 (Retry `pred_known_to_hold_modulo_regions` with fulfillment if ambiguous)
- #108759 (1.41.1 supported 32-bit Apple targets)
- #108839 (Canonicalize root var when making response from new solver)
- #108856 (Remove DropAndReplace terminator)
- #108882 (Tweak E0740)
- #108898 (Set `LIBC_CHECK_CFG=1` when building Rust code in bootstrap)
- #108911 (Improve rustdoc-gui/tester.js code a bit)
- #108916 (Remove an unused return value in `rustc_hir_typeck`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Canonicalize root var when making response from new solver
During trait solving, if we equate two inference variables `?0` and `?1` but don't equate them with any rigid types, then `InferCtxt::probe_ty_var` will return `Err` for both of these. The canonicalizer code will then canonicalize the variables independently(!), and the response will not reflect the fact that these two variables have been made equal.
This hinders inference and I also don't think it's sound? I haven't thought too much about it past that, so let's talk about it.
r? ``@lcnr``
Retry `pred_known_to_hold_modulo_regions` with fulfillment if ambiguous
Fixes#108721
The problem here is that when we're checking `is_sized_raw` during codegen on some type that has a lot of opaques in it, something emits several nested obligations that are individually ambiguous, but when processed together in a loop then apply modulo regions. Since the `evaluate_predicates_recursively` inner loop doesn't process predicates until they stop changing, we return `EvaluatedToAmbig`, which makes the sized check return false incorrectly. See:
f15f0ea739/compiler/rustc_trait_selection/src/traits/select/mod.rs (L596-L606)
... Compared to the analogous loop in the new solver:
f15f0ea739/compiler/rustc_trait_selection/src/solve/mod.rs (L481-L512)
To fix this, if we get ambiguous during `pred_known_to_hold_modulo_regions`, just retry the obligation in a fulfillment context.
--
Unfortunately... I don't have a test for this. I've only tested this locally. Pending minimization :/
r? types
Suppress copy impl error when post-normalized type references errors
Suppress spurious errors from the `Copy` impl validity check when fields have bad types *post*-normalization, instead of just pre-normalization.
----
The const-generics test regressed recently due to #107965, cc `````@BoxyUwU.`````
* I think it's because `[_; 0u32]: Copy` now fails to hold because a nested obligation `ConstArgHasType(0u32, usize)` fails.
* It's interesting that `[const_error]` shows up in the type only after normalization, though, but I'm pretty sure that it's due to the evaluate call that happens when normalizing unevaluated consts.
This was previously needed because the indirection used to hide some unexplained lifetime errors, which it turned out were related to the `min_choice` algorithm.
Removing the indirection also solves a couple of cycle errors, large moves and makes async blocks support the `#[track_caller]` annotation.
always resolve to universal regions if possible
`RegionConstraintCollector::opportunistic_resolve_var`, which is used in canonicalization and projection logic, doesn't resolve the region var to an equal universal region. So if we have equated `'static == '1 == '2`, it doesn't resolve `'1` or `'2` to `'static`. Now it does!
Addresses review comment https://github.com/rust-lang/rust/pull/107376#discussion_r1093233687.
r? `@lcnr`
rustc_middle: Remove trait `DefIdTree`
This trait was a way to generalize over both `TyCtxt` and `Resolver`, but now `Resolver` has access to `TyCtxt`, so this trait is no longer necessary.
Don't project specializable RPITIT projection
This effective rejects specialization + RPITIT/AFIT (usages of `impl Trait` in traits) because the implementation is significantly complicated over making regular "default" trait method bodies work.
I have another PR that experimentally fixes all this, but the code may not be worth investing in.
Treat `str` as containing `[u8]` for auto trait purposes
Wanted to gauge ``@rust-lang/lang`` and ``@rust-lang/types`` teams' thoughts on treating `str` as "containing" a `[u8]` slice for auto-trait purposes.
``@dtolnay`` brought this up in https://github.com/rust-lang/rust/issues/13231#issuecomment-1399386472 as a blocker for future `str` type librarification, and I think it's both a valid concern and very easy to fix. I'm interested in actually doing that `str` type librarification (#107939), but this probably should be considered in the mean time regardless of that PR.
r? types for the impl, though this definitely needs an FCP.
(This is a large commit. The changes to
`compiler/rustc_middle/src/ty/context.rs` are the most important ones.)
The current naming scheme is a mess, with a mix of `_intern_`, `intern_`
and `mk_` prefixes, with little consistency. In particular, in many
cases it's easy to use an iterator interner when a (preferable) slice
interner is available.
The guiding principles of the new naming system:
- No `_intern_` prefixes.
- The `intern_` prefix is for internal operations.
- The `mk_` prefix is for external operations.
- For cases where there is a slice interner and an iterator interner,
the former is `mk_foo` and the latter is `mk_foo_from_iter`.
Also, `slice_interners!` and `direct_interners!` can now be `pub` or
non-`pub`, which helps enforce the internal/external operations
division.
It's not perfect, but I think it's a clear improvement.
The following lists show everything that was renamed.
slice_interners
- const_list
- mk_const_list -> mk_const_list_from_iter
- intern_const_list -> mk_const_list
- substs
- mk_substs -> mk_substs_from_iter
- intern_substs -> mk_substs
- check_substs -> check_and_mk_substs (this is a weird one)
- canonical_var_infos
- intern_canonical_var_infos -> mk_canonical_var_infos
- poly_existential_predicates
- mk_poly_existential_predicates -> mk_poly_existential_predicates_from_iter
- intern_poly_existential_predicates -> mk_poly_existential_predicates
- _intern_poly_existential_predicates -> intern_poly_existential_predicates
- predicates
- mk_predicates -> mk_predicates_from_iter
- intern_predicates -> mk_predicates
- _intern_predicates -> intern_predicates
- projs
- intern_projs -> mk_projs
- place_elems
- mk_place_elems -> mk_place_elems_from_iter
- intern_place_elems -> mk_place_elems
- bound_variable_kinds
- mk_bound_variable_kinds -> mk_bound_variable_kinds_from_iter
- intern_bound_variable_kinds -> mk_bound_variable_kinds
direct_interners
- region
- intern_region (unchanged)
- const
- mk_const_internal -> intern_const
- const_allocation
- intern_const_alloc -> mk_const_alloc
- layout
- intern_layout -> mk_layout
- adt_def
- intern_adt_def -> mk_adt_def_from_data (unusual case, hard to avoid)
- alloc_adt_def(!) -> mk_adt_def
- external_constraints
- intern_external_constraints -> mk_external_constraints
Other
- type_list
- mk_type_list -> mk_type_list_from_iter
- intern_type_list -> mk_type_list
- tup
- mk_tup -> mk_tup_from_iter
- intern_tup -> mk_tup
Use `tcx.ty_error_with_guaranteed` in more places, rename variants
1. Use `ty_error_with_guaranteed` more so we don't delay so many span bugs
2. Rename `ty_error_with_guaranteed` to `ty_error`, `ty_error` to `ty_error_misc`. This is to incentivize using the former over the latter in cases where we already are witness to a `ErrorGuaranteed` token.
Second commit is just name replacement, so the first commit can be reviewed on its own with more scrutiny.
Use associated type bounds in some places in the compiler
Use associated type bounds for some nested `impl Trait<Assoc = impl Trait2>` cases. I'm generally keen to introduce new lang features that are more mature into the compiler, but maybe let's see what others think?
Side-note: I was surprised that the only use-cases of nested impl trait in the compiler are just iterator related?!
Remove type-traversal trait aliases
#107924 moved the type traversal (folding and visiting) traits into the type library, but created trait aliases in `rustc_middle` to minimise both the API churn for trait consumers and the arising boilerplate. As mentioned in that PR, an alternative approach of defining subtraits with blanket implementations of the respective supertraits was also considered at that time but was ruled out as not adding much value.
Unfortunately, it has since emerged that rust-analyzer has difficulty with these trait aliases at present, resulting in a degraded contributor experience (see the recent [r-a has become useless](https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/r-a.20has.20become.20useless) topic on the #t-compiler/help Zulip stream).
This PR removes the trait aliases, and accordingly the underlying type library traits are now used directly; they are parameterised by `TyCtxt<'tcx>` rather than just the `'tcx` lifetime, and imports have been updated to reflect the fact that the trait aliases' explicitly named traits are no longer automatically brought into scope. These changes also roll-back the (no-longer required) workarounds to #107747 that were made in b409329c62.
Since this PR is just a find+replace together with the changes necessary for compilation & tidy to pass, it's currently just one mega-commit. Let me know if you'd like it broken up.
r? `@oli-obk`
errors: generate typed identifiers in each crate
Instead of loading the Fluent resources for every crate in `rustc_error_messages`, each crate generates typed identifiers for its own diagnostics and creates a static which are pulled together in the `rustc_driver` crate and provided to the diagnostic emitter.
There are advantages and disadvantages to this change..
#### Advantages
- Changing a diagnostic now only recompiles the crate for that diagnostic and those crates that depend on it, rather than `rustc_error_messages` and all crates thereafter.
- This approach can be used to support first-party crates that want to supply translatable diagnostics (e.g. `rust-lang/thorin` in https://github.com/rust-lang/rust/pull/102612#discussion_r985372582, cc `@JhonnyBillM)`
- We can extend this a little so that tools built using rustc internals (like clippy or rustdoc) can add their own diagnostic resources (much more easily than those resources needing to be available to `rustc_error_messages`)
#### Disadvantages
- Crates can only refer to the diagnostic messages defined in the current crate (or those from dependencies), rather than all diagnostic messages.
- `rustc_driver` (or some other crate we create for this purpose) has to directly depend on *everything* that has error messages.
- It already transitively depended on all these crates.
#### Pending work
- [x] I don't know how to make `rustc_codegen_gcc`'s translated diagnostics work with this approach - because `rustc_driver` can't depend on that crate and so can't get its resources to provide to the diagnostic emission. I don't really know how the alternative codegen backends are actually wired up to the compiler at all.
- [x] Update `triagebot.toml` to track the moved FTL files.
r? `@compiler-errors`
cc #100717
Move some `InferCtxt` methods to `EvalCtxt` in new solver
Moving towards eventually making the `InferCtxt` within `EvalCtxt` private, so that we make sure not to do anything strange in the solver. This doesn't finish this work yet, just gets it started.
r? ``@lcnr``
Instead of loading the Fluent resources for every crate in
`rustc_error_messages`, each crate generates typed identifiers for its
own diagnostics and creates a static which are pulled together in the
`rustc_driver` crate and provided to the diagnostic emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
Use DefKind to give more item kind information during BindingObligation note
The current label says "required by a bound in this". When I see that label, my immediate impression is "this... **what**?". It feels like it was cut short.
Alternative to this would be saying "in this item", but adding the item kind is strictly more informational and adds very little overhead to the existing error presentation.
Fix RPITITs in default trait methods (by assuming projection predicates in param-env)
Instead of having special projection logic that allows us to turn `ProjectionTy(RPITIT, [Self#0, ...])` into `OpaqueTy(RPITIT, [Self#0, ...])`, we can instead augment the param-env of default trait method bodies to assume these as projection predicates. This should allow us to only project where we're allowed to!
In order to make this work without introducing a bunch of cycle errors, we additionally tweak the `OpaqueTypeExpander` used by `ParamEnv::with_reveal_all_normalized` to not normalize the right-hand side of projection predicates. This should be fine, because if we use the projection predicate to normalize some other projection type, we'll continue to normalize the opaque that it gets projected to.
This also makes it possible to support default trait methods with RPITITs in an associated-type based RPITIT lowering strategy without too much extra effort.
Fixes#107002
Alternative to #108142
Fix some more `non_lifetime_binders` stuff with higher-ranked trait bounds
1. When assembling candidates for `for<T> T: Sized`, we can't ICE because the self-type is a bound type.
2. Fix an issue where, when canonicalizing in non-universe preserving mode, we don't actually set the universe for placeholders to the root even though we do the same for region vars.
3. Make `Placeholder("T")` format like `T` in error messages.
Fixes#108180Fixes#108182
r? types
This function has this line twice:
```
let bound_vars = tcx.intern_bound_variable_kinds(&bound_vars);
```
The second occurrence is effectively a no-op, because the first
occurrence interned any that needed it.
`InternIteratorElement` is a trait used to intern values produces by
iterators. There are three impls, corresponding to iterators that
produce different types:
- One for `T`, which operates straightforwardly.
- One for `Result<T, E>`, which is fallible, and will fail early with an
error result if any of the iterator elements are errors.
- One for `&'a T`, which clones the items as it iterates.
That last one is bad: it's extremely easy to use it without realizing
that it clones, which goes against Rust's normal "explicit is better"
approach to cloning.
So this commit just removes it. In practice, there weren't many use
sites. For all but one of them `into_iter()` could be used, which avoids
the need for cloning. And for the one remaining case `copied()` is
used.
There are several `mk_foo`/`intern_foo` pairs, where the former takes an
iterator and the latter takes a slice. (This naming convention is bad,
but that's a fix for another PR.)
This commit changes several `mk_foo` occurrences into `intern_foo`,
avoiding the need for some `.iter()`/`.into_iter()` calls. Affected
cases:
- mk_type_list
- mk_tup
- mk_substs
- mk_const_list
Switch to `EarlyBinder` for `type_of` query
Part of the work to finish #105779 and implement https://github.com/rust-lang/types-team/issues/78.
Several queries `X` have a `bound_X` variant that wraps the output in `EarlyBinder`. This adds `EarlyBinder` to the return type of the `type_of` query and removes `bound_type_of`.
r? `@lcnr`
Do not ICE on unmet trait alias impl bounds
Fixes#108132
I've also added some documentation to the `impl_def_id` field of `DerivedObligationCause` to try and minimise the risk of such errors in future.
r? `@compiler-errors`
Implement partial support for non-lifetime binders
This implements support for non-lifetime binders. It's pretty useless currently, but I wanted to put this up so the implementation can be discussed.
Specifically, this piggybacks off of the late-bound lifetime collection code in `rustc_hir_typeck::collect::lifetimes`. This seems like a necessary step given the fact we don't resolve late-bound regions until this point, and binders are sometimes merged.
Q: I'm not sure if I should go along this route, or try to modify the earlier nameres code to compute the right bound var indices for type and const binders eagerly... If so, I'll need to rename all these queries to something more appropriate (I've done this for `resolve_lifetime::Region` -> `resolve_lifetime::ResolvedArg`)
cc rust-lang/types-team#81
r? `@ghost`
Rollup of 7 pull requests
Successful merges:
- #106347 (More accurate spans for arg removal suggestion)
- #108057 (Prevent some attributes from being merged with others on reexports)
- #108090 (`if $c:expr { Some($r:expr) } else { None }` =>> `$c.then(|| $r)`)
- #108092 (note issue for feature(packed_bundled_libs))
- #108099 (use chars instead of strings where applicable)
- #108115 (Do not ICE on unmet trait alias bounds)
- #108125 (Add new people to the compiletest review rotation)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Optimize `mk_region`
PR #107869 avoiding some interning under `mk_ty` by special-casing `Ty` variants with simple (integer) bodies. This PR does something similar for regions.
r? `@compiler-errors`
Use `target` instead of `machine` for mir interpreter integer handling.
The naming of `machine` only makes sense from a mir interpreter internals perspective, but outside users talk about the `target` platform. As per https://github.com/rust-lang/rust/pull/108029#issuecomment-1429791015
r? `@RalfJung`
use semantic equality for const param type equality assertion
Fixes#107898
See added test for what caused this ICE
---
The current in assertion in `relate.rs` is rather inadequate when keeping in mind future expansions to const generics:
- it will ICE when there are infer vars in a projection in a const param ty
- it will spurriously return false when either ty has infer vars because of using `==` instead of `infcx.at(..).eq`
- i am also unsure if it would be possible with `adt_const_params` to craft a situation where the const param type is not wf causing `normalize_erasing_regions` to `bug!` when we would have emitted a diagnostic.
This impl feels pretty Not Great to me although i am not sure what a better idea would be.
- We have to have the logic behind a query because neither `relate.rs` or `combine.rs` have access to trait solving machinery (without evaluating nested obligations this assert will become _far_ less useful under lazy norm, which consts are already doing)
- `relate.rs` does not have access to canonicalization machinery which is necessary in order to have types potentially containing infer vars in query arguments.
We could possible add a method to `TypeRelation` to do this assertion rather than a query but to avoid implementing the same logic over and over we'd probably end up with the logic in a free function somewhere in `rustc_trait_selection` _anyway_ so I don't think that would be much better.
We could also just remove this assertion, it should not actually be necessary for it to be present. It has caught some bugs in the past though so if possible I would like to keep it.
r? `@compiler-errors`
Much like there are specialized variants of `mk_ty`. This will enable
some optimization in the next commit.
Also rename the existing `re_error*` functions as `mk_re_error*`, for
consistency.
add an unstable `#[rustc_coinductive]` attribute
useful to test coinduction, especially in the new solver.
as this attribute should remain permanently unstable I don't think this needs any official approval. cc ``@rust-lang/types``
had to weaken the check for stable query results in the solver to prevent an ICE if there's a coinductive cycle with constraints.
r? ``@compiler-errors``
Rollup of 9 pull requests
Successful merges:
- #105019 (Add parentheses properly for borrowing suggestion)
- #106001 (Stop at the first `NULL` argument when iterating `argv`)
- #107098 (Suggest function call on pattern type mismatch)
- #107490 (rustdoc: remove inconsistently-present sidebar tooltips)
- #107855 (Add a couple random projection tests for new solver)
- #107857 (Add ui test for implementation on projection)
- #107878 (Clarify `new_size` for realloc means bytes)
- #107888 (revert #107074, add regression test)
- #107900 (Zero the `REPARSE_MOUNTPOINT_DATA_BUFFER` header)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
correctly update goals in the cache
we may want to actually write the response for our goal into the provisional or global cache instead of simply using the result from the last iteration '^^
r? ```@rust-lang/initiative-trait-system-refactor```
Rename `replace_bound_vars_with_*` to `instantiate_binder_with_*`
Mentioning "binder" rather than "bound vars", imo, makes it clearer that we're doing something to the binder as a whole.
Also, "instantiate" is the verb that I'm always reaching for when I'm looking for these functions, and the name that we use in the new solver anyways.
r? types
Rename `PointerSized` to `PointerLike`
The old name was unnecessarily vague. This PR renames a nightly language feature that I added, so I don't think it needs any additional approval, though anyone can feel free to speak up if you dislike the rename.
It's still unsatisfying that we don't the user which of {size, alignment} is wrong, but this trait really is just a stepping stone for a more generalized mechanism to create `dyn*`, just meant for nightly testing, so I don't think it really deserves additional diagnostic machinery for now.
Fixes#107696, cc ``@RalfJung``
r? ``@eholk``
Modify existing bounds if they exist
Fixes#107335.
This implementation is kinda gross but I don't really see a better way to do it.
This primarily does two things: Modifies `suggest_constraining_type_param` to accept a new parameter that indicates a span to be replaced instead of added, if presented, and limit the additive suggestions to either suggest a new bound on an existing bound (see newly added unit test) or add the generics argument if a generics argument wasn't found.
The former change is required to retain the capability to add an entirely new bounds if it was entirely omitted.
r? ``@compiler-errors``
Refine error spans for "The trait bound `T: Trait` is not satisfied" when passing literal structs/tuples
This PR adds a new heuristic which refines the error span reported for "`T: Trait` is not satisfied" errors, by "drilling down" into individual fields of structs/enums/tuples to point to the "problematic" value.
Here's a self-contained example of the difference in error span:
```rs
struct Burrito<Filling> {
filling: Filling,
}
impl <Filling: Delicious> Delicious for Burrito<Filling> {}
fn eat_delicious_food<Food: Delicious>(food: Food) {}
fn will_type_error() {
eat_delicious_food(Burrito { filling: Kale });
// ^~~~~~~~~~~~~~~~~~~~~~~~~ (before) The trait bound `Kale: Delicious` is not satisfied
// ^~~~ (after) The trait bound `Kale: Delicious` is not satisfied
}
```
(kale is fine, this is just a silly food-based example)
Before this PR, the error span is identified as the entire argument to the generic function `eat_delicious_food`. However, since only `Kale` is the "problematic" part, we can point at it specifically. In particular, the primary error message itself mentions the missing `Kale: Delicious` trait bound, so it's much clearer if this part is called out explicitly.
---
The _existing_ heuristic tries to label the right function argument in `point_at_arg_if_possible`. It goes something like this:
- Look at the broken base trait `Food: Delicious` and find which generics it mentions (in this case, only `Food`)
- Look at the parameter type definitions and find which of them mention `Filling` (in this case, only `food`)
- If there is exactly one relevant parameter, label the corresponding argument with the error span, instead of the entire call
This PR extends this heuristic by further refining the resulting expression span in the new `point_at_specific_expr_if_possible` function. For each `impl` in the (broken) chain, we apply the following strategy:
The strategy to determine this span involves connecting information about our generic `impl`
with information about our (struct) type and the (struct) literal expression:
- Find the `impl` (`impl <Filling: Delicious> Delicious for Burrito<Filling>`)
that links our obligation (`Kale: Delicious`) with the parent obligation (`Burrito<Kale>: Delicious`)
- Find the "original" predicate constraint in the impl (`Filling: Delicious`) which produced our obligation.
- Find all of the generics that are mentioned in the predicate (`Filling`).
- Examine the `Self` type in the `impl`, and see which of its type argument(s) mention any of those generics.
- Examing the definition for the `Self` type, and identify (for each of its variants) if there's a unique field
which uses those generic arguments.
- If there is a unique field mentioning the "blameable" arguments, use that field for the error span.
Before we do any of this logic, we recursively call `point_at_specific_expr_if_possible` on the parent
obligation. Hence we refine the `expr` "outwards-in" and bail at the first kind of expression/impl we don't recognize.
This function returns a `Result<&Expr, &Expr>` - either way, it returns the `Expr` whose span should be
reported as an error. If it is `Ok`, then it means it refined successfull. If it is `Err`, then it may be
only a partial success - but it cannot be refined even further.
---
I added a new test file which exercises this new behavior. A few existing tests were affected, since their error spans are now different. In one case, this leads to a different code suggestion for the autofix - although the new suggestion isn't _wrong_, it is different from what used to be.
This change doesn't create any new errors or remove any existing ones, it just adjusts the spans where they're presented.
---
Some considerations: right now, this check occurs in addition to some similar logic in `adjust_fulfillment_error_for_expr_obligation` function, which tidies up various kinds of error spans (not just trait-fulfillment error). It's possible that this new code would be better integrated into that function (or another one) - but I haven't looked into this yet.
Although this code only occurs when there's a type error, it's definitely not as efficient as possible. In particular, there are definitely some cases where it degrades to quadratic performance (e.g. for a trait `impl` with 100+ generic parameters or 100 levels deep nesting of generic types). I'm not sure if these are realistic enough to worry about optimizing yet.
There's also still a lot of repetition in some of the logic, where the behavior for different types (namely, `struct` vs `enum` variant) is _similar_ but not the same.
---
I think the biggest win here is better targeting for tuples; in particular, if you're using tuples + traits to express variadic-like functions, the compiler can't tell you which part of a tuple has the wrong type, since the span will cover the entire argument. This change allows the individual field in the tuple to be highlighted, as in this example:
```
// NEW
LL | want(Wrapper { value: (3, q) });
| ---- ^ the trait `T3` is not implemented for `Q`
// OLD
LL | want(Wrapper { value: (3, q) });
| ---- ^~~~~~~~~~~~~~~~~~~~~~~~~ the trait `T3` is not implemented for `Q`
```
Especially with large tuples, the existing error spans are not very effective at quickly narrowing down the source of the problem.
This now uses `node_to_string` for both missing and seen Ids, which includes
the snippet of code for which the Id was allocated.
Also removes the duplicated printing of `HirId`, as `node_to_string` includes that already.
Similarly, changes all other users of `node_to_string` that do so, and changes the output of `node_to_string`, which is now "$hirid ($what `$span` in $path)".
Track bound types like bound regions
When we instantiate bound types into placeholder types, we throw away the names for some reason. These names are particularly useful for error reporting once we have `for<T>` binders.
r? types
small refactor to new projection code
extract `eq_term_and_make_canonical_response` into a helper function which also is another guarantee that the expected term does not influence candidate selection for projections.
also change `evaluate_all(vec![single_goal])` to use `evaluate_goal`.
the second commit now also adds a `debug_assert!` to `evaluate_goal`.
Modify primary span label for E0308
Looking at the reactions to https://hachyderm.io/`@ekuber/109622160673605438,` a lot of people seem to have trouble understanding the current output, where the primary span label on type errors talks about the specific types that diverged, but these can be deeply nested type parameters. Because of that we could see "expected i32, found u32" in the label while the note said "expected Vec<i32>, found Vec<u32>". This understandably confuses people. I believe that once people learn to read these errors it starts to make more sense, but this PR changes the output to be more in line with what people might expect, without sacrificing terseness.
Fix#68220.
Use `ObligationCtxt::new_in_snapshot` in `satisfied_from_param_env`
We can evaluate nested `ConstEvaluatable` obligations in an evaluation probe, which will ICE if we use `ObligationCtxt::new`.
Fixes#107474Fixes#106666
r? `@BoxyUwU` but feel free to reassign
cc `@JulianKnodt` who i think added this assertion code
Not sure if the rustdoc test is needed, but can't hurt. They're the same root cause, though.
Skip possible where_clause_object_safety lints when checking `multiple_supertrait_upcastable`
Fix#106247
To achieve this, I lifted the `WhereClauseReferencesSelf` out from `object_safety_violations` and move it into `is_object_safe` (which is changed to a new query).
cc `@dtolnay`
r? `@compiler-errors`
Remove HirId -> LocalDefId map from HIR.
Having this map in HIR prevents the creating of new definitions after HIR has been built.
Thankfully, we do not need it.
Based on https://github.com/rust-lang/rust/pull/103902
