* basic test setup
* remove lifetime and drop resources on test - test fails now just as expected
* compute pass recording is now hub dependent (needs gfx_select)
* compute pass recording now bumps reference count of uses resources directly on recording
TODO:
* bind groups don't work because the Binder gets an id only
* wgpu level error handling is missing
* simplify compute pass state flush, compute pass execution no longer needs to lock bind_group storage
* wgpu sided error handling
* make ComputePass hal dependent, removing command cast hack. Introduce DynComputePass on wgpu side
* remove stray repr(C)
* changelog entry
* fix deno issues -> move DynComputePass into wgc
* split out resources setup from test
Use `std::panic::Location` to record the source location of each
`#[gpu_test]` test, and if it fails, include that in the error output.
This is not essential, but it should make working with failures a bit
more comfortable.
Invoke a DeviceLostClosure immediately if set on an invalid device.
To make the device invalid, this defines an explicit, test-only method
make_invalid. It also modifies calls that expect to always retrieve a
valid device.
Co-authored-by: Erich Gubler <erichdongubler@gmail.com>
Rust would have made this operation either an overflow in release mode,
or a panic in debug mode. Neither seem appropriate for this context,
where I suspect an error should be returned instead. Web browsers, for
instance, shouldn't crash simply because of an issue of this nature.
Users may, quite reasonably, have bad arguments to this in early stages
of development!
Fuzz testing in Firefox encountered crashes for calls of
`Global::command_encoder_clear_buffer` where:
* `offset` is greater than `buffer.size`, but…
* `size` is `None`.
Oops! We should _always_ check this (i.e., even when `size` is `None`),
because we have no guarantee that `offset` and the fallback value of
`size` is in bounds. 😅 So, we change validation here to unconditionally
compute `size` and run checks we previously gated behind `if let
Some(size) = size { … }`.
For convenience, the spec. link for this method:
<https://gpuweb.github.io/gpuweb/#dom-gpucommandencoder-clearbuffer>
* [wgpu-core] Add tests for minimum binding size validation.
* [wgpu-core] Compute minimum binding size correctly for arrays.
In early versions of WGSL, `storage` or `uniform` global variables had
to be either structs or runtime-sized arrays. This rule was relaxed,
and now globals can have any type; Naga automatically wraps such
variables in structs when required by the backend shading language.
Under the old rules, whenever wgpu-core saw a `storage` or `uniform`
global variable with an array type, it could assume it was a
runtime-sized array, and take the stride as the minimum binding size.
Under the new rules, wgpu-core must consider fixed-sized and
runtime-sized arrays separately.
This fixes two cases where a DeviceLostClosureC might not be consumed
before it is dropped, which is a requirement:
1) When the closure is replaced, this ensures the to-be-dropped closure
is invoked.
2) When the global is dropped, this ensures that the closure is invoked
before it is dropped.
The first of these two cases is tested in a new test,
DEVICE_LOST_REPLACED_CALLBACK. The second case has a stub,
always-skipped test, DROPPED_GLOBAL_THEN_DEVICE_LOST. The test is
always-skipped because there does not appear to be a way to drop the
global from within a test. Nor is there any other way to reach
Device.prepare_to_die without having first dropping the device.
* Add serde, serialize, deserialize features to wgpu and wgpu-core
Remove trace, replay features from wgpu-types
* Do not use trace, replay in wgpu-types anymore
* Make use of deserialize, serialize features in wgpu-core
* Make use of serialize, deserialize features in wgpu
* Run cargo fmt
* Use serde(default) for deserialize only
* Fix serial-pass feature
* Add a comment for new features
* Add CHANGELOG entry
* Run cargo fmt
* serial-pass also needs serde features for Id<T>
* Add feature documentation to lib.rs docs
* wgpu-types implicit serde feature
* wgpu-core explicit serde feature
* wgpu explicit serde feature
* Update CHANGELOG.md
* Fix compilation with default features
* Address review comments
* Convert Tests to Use Async Poll
* Update examples/src/repeated_compute/mod.rs
Co-authored-by: Andreas Reich <r_andreas2@web.de>
---------
Co-authored-by: Andreas Reich <r_andreas2@web.de>
* Ensure device lost closure is called exactly once before being dropped.
This requires a change to the Rust callback signature, which is now Fn
instead of FnOnce. When the Rust callback or the C closure are dropped,
they will panic if they haven't been called. `device_drop` is changed
to call the closure with a message of "Device dropped." A test is added.
* Remove some locks in BindGroup
These are only written to clear the vectors when triaging bindgroups for destruction, which is not necessary. We can let the reference counts drop when the bind group is dropped.
* Make the mem_leak test pass again
* Keep the value in its storage after destroy
in #4657 the destroy implementation was made to remove the value from the storage and leave an error variant in its place.
Unfortunately this causes some issues with the tracking code which expects the ID to be unregistered after the value has been fully destroyed, even if the latter is not in storage anymore.
To work around that, this commit adds a `Destroyed` variant in storage which keeps the value so that the tracking behavior is preserved while
still making sure that most accesses to the destroyed resource lead to validation errors.
... Except for submitted command buffers that need to be consumed right away. These are replaced with `Element::Error` like before this commit.
Co-authored-by: Teodor Tanasoaia <28601907+teoxoy@users.noreply.github.com>
* Better handle destroying textures and buffers
Before this commit, explicitly destroying a texture or a buffer (without dropping it)
schedules the asynchronous destruction of its raw resources but does not actually mark
it as destroyed. This can cause some incorrect behavior, for example mapping a buffer
after destroying it does not cause a validation error (and later panics due to the
map callback being dropped without being called).
This Commit adds `Storage::take_and_mark_destroyed` for use in `destroy` methods.
Since it puts the resource in the error state, other methods properly catch that
the resource is no longer usable when attempting to access it and raise validation
errors.
There are other resource types that require similar treatment and will be addressed
in followup work.
* Add a changelog entry
* More complete implementation of "lose the device".
This provides a way for wgpu-core to specify a callback on "lose the
device". It ensures this callback is called at the appropriate times:
either after device.destroy has empty queues, or on demand from
device.lose.
A test has been added to device.rs.
* Updated CHANGELOG.md.
* Fix conversion to *const c_char.
* Use an allow lint to permit trivial_casts.
* rustfmt changes.
* Add `BGRA8UNORM_STORAGE` extension
* Leave a comment in the backends that don't support bgra8unorm-storage
* Pass the appropriate storage format to naga
* Check for bgra8unorm storage support in the vulkan backend
* Add a test
Co-authored-by: Jinlei Li <jinleili0@outlook.com>
Co-authored-by: Teodor Tanasoaia <28601907+teoxoy@users.noreply.github.com>
* Make buffer_unmap check for device validity, add tests.
This patch makes buffer_unmap check for a valid device, and corrects
buffer_map to return the appropriate error for an invalid device.
Tests are added for both operations.
It also adds device validity checks to device_maintain_ids and to the
functions that get and set buffer sub data.
* Update changelog and test comment.
* Run rustfmt.
* Update test device_lose_then_more to specify more buffer usages to keep Vulkan happy.
* Remove generic parameter in compat::Manager.
The code is specific to bind group layout ids and the generic parameter gets in the way.
* Add a test.
The test actually covers wgpu's configuration where deduplication does not require the indirection rather than the new code. I used it to debug the new code with the configuration hard-coded. It's tedious to add a test to cover dedpuplication of bind group layouts for users of wgpu_core to provide their IDs, we can rely on the CTS which has test for that.
* Implement bind group layout deduplication for all configurations
Currently wgpu-core implement bind group layout deduplication only when it creates its own resource IDs. In other words it works for wgpu but not in Firefox.
This PR bridges the gap by allowing an optional indirection in bind group layouts: each BGL may store an ID referring to its "deduplicated" BGL.
When referring to a BGL the rest of the code must make sure to follow the indirection. The exception is command buffer processing which is considered hot code and where we first validate against the provided BGL ID and only follow the indirection if the initial check failed.
The main pain point with this approach is the various places where wgpu-core manually updates reference counts: we have to be careful about following the indirection to track the right BGL.
* Avoid making decisions based on the size of some generic type.
