Remove save-analysis.
Most tests involving save-analysis were removed, but I kept a few where the `-Zsave-analysis` was an add-on to the main thing being tested, rather than the main thing being tested.
Closes https://github.com/rust-lang/rust/issues/43606
Fix index out of bounds ICE in `point_at_expr_source_of_inferred_type`
There might be more type params than args to a method call, which leads to an index out of bounds panic.
I'm not familiar with this code at all, so unsure whether this is the right fix, but at least this patch fixes#108042 for me (I hit the same issue with similar code)
Most tests involving save-analysis were removed, but I kept a few where
the `-Zsave-analysis` was an add-on to the main thing being tested,
rather than the main thing being tested.
For `x.py install`, the `rust-analysis` target has been removed.
For `x.py dist`, the `rust-analysis` target has been kept in a
degenerate form: it just produces a single file `reduced.json`
indicating that save-analysis has been removed. This is necessary for
rustup to keep working.
Closes#43606.
Don't ICE in `might_permit_raw_init` if reference is polymorphic
Emitting optimized MIR for a polymorphic function may require computing layout of a type that isn't (yet) known. This happens in the instcombine pass, for example. Let's fail gracefully in that condition.
cc `@saethlin`
fixes#107999
Don't suggest `#[doc(hidden)]` trait methods with matching return type
Fixes#107983, addressing the bad suggestion.
The test can probably be made more specific to this case, but I'm unsure how.
`@rustbot` label +A-diagnostics
Fix unintentional UB in ui tests
`@matthiaskrgr` found UB in a bunch of the ui tests. This PR fixes a batch of miscellaneous tests I didn't think needed reviewers from a particular part of the project.
Avoid accessing HIR when it can be avoided
Experiment to see if it helps some incremental cases.
Will be rebased once https://github.com/rust-lang/rust/pull/107942 gets merged.
r? `@ghost`
Rollup of 7 pull requests
Successful merges:
- #105300 (rework min_choice algorithm of member constraints)
- #107163 (Remove some superfluous type parameters from layout.rs.)
- #107173 (Suggest the correct array length on mismatch)
- #107411 (Handle discriminant in DataflowConstProp)
- #107968 (Enable `#[thread_local]` on armv6k-nintendo-3ds)
- #108032 (Un📦ing the Resolver)
- #108060 (Revert to using `RtlGenRandom` as a fallback)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Handle discriminant in DataflowConstProp
cc ``@jachris``
r? ``@JakobDegen``
This PR attempts to extend the DataflowConstProp pass to handle propagation of discriminants. We handle this by adding 2 new variants to `TrackElem`: `TrackElem::Variant` for enum variants and `TrackElem::Discriminant` for the enum discriminant pseudo-place.
The difficulty is that the enum discriminant and enum variants may alias each another. This is the issue of the `Option<NonZeroUsize>` test, which is the equivalent of https://github.com/rust-lang/unsafe-code-guidelines/issues/84 with a direct write.
To handle that, we generalize the flood process to flood all the potentially aliasing places. In particular:
- any write to `(PLACE as Variant)`, either direct or through a projection, floods `(PLACE as OtherVariant)` for all other variants and `discriminant(PLACE)`;
- `SetDiscriminant(PLACE)` floods `(PLACE as Variant)` for each variant.
This implies that flooding is not hierarchical any more, and that an assignment to a non-tracked place may need to flood a tracked place. This is handled by `for_each_aliasing_place` which generalizes `preorder_invoke`.
As we deaggregate enums by putting `SetDiscriminant` last, this allows to propagate the value of the discriminant.
This refactor will allow to make https://github.com/rust-lang/rust/pull/107009 able to handle discriminants too.
Suggest the correct array length on mismatch
Fixes#107156
I wasn't able to find a way to get the `Span` for the actual array size unfortunately, so this suggestion can't be applied automatically.
``@rustbot`` label +A-diagnostics
rework min_choice algorithm of member constraints
See [this comment](https://github.com/rust-lang/rust/pull/105300#issuecomment-1384312743) for the description of the new algorithm.
Fixes#63033Fixes#104639
This uses a more general algorithm than #89056 that doesn't treat `'static` as a special case. It thus accepts more code. For example:
```rust
async fn test2<'s>(_: &'s u8, _: &'_ &'s u8, _: &'_ &'s u8) {}
```
I claim it's more correct as well because it fixes#104639.
cc ``@nikomatsakis`` ``@lqd`` ``@tmandry`` ``@eholk`` ``@chenyukang`` ``@oli-obk``
r? types
use semantic equality for const param type equality assertion
Fixes#107898
See added test for what caused this ICE
---
The current in assertion in `relate.rs` is rather inadequate when keeping in mind future expansions to const generics:
- it will ICE when there are infer vars in a projection in a const param ty
- it will spurriously return false when either ty has infer vars because of using `==` instead of `infcx.at(..).eq`
- i am also unsure if it would be possible with `adt_const_params` to craft a situation where the const param type is not wf causing `normalize_erasing_regions` to `bug!` when we would have emitted a diagnostic.
This impl feels pretty Not Great to me although i am not sure what a better idea would be.
- We have to have the logic behind a query because neither `relate.rs` or `combine.rs` have access to trait solving machinery (without evaluating nested obligations this assert will become _far_ less useful under lazy norm, which consts are already doing)
- `relate.rs` does not have access to canonicalization machinery which is necessary in order to have types potentially containing infer vars in query arguments.
We could possible add a method to `TypeRelation` to do this assertion rather than a query but to avoid implementing the same logic over and over we'd probably end up with the logic in a free function somewhere in `rustc_trait_selection` _anyway_ so I don't think that would be much better.
We could also just remove this assertion, it should not actually be necessary for it to be present. It has caught some bugs in the past though so if possible I would like to keep it.
r? `@compiler-errors`
add an unstable `#[rustc_coinductive]` attribute
useful to test coinduction, especially in the new solver.
as this attribute should remain permanently unstable I don't think this needs any official approval. cc ``@rust-lang/types``
had to weaken the check for stable query results in the solver to prevent an ICE if there's a coinductive cycle with constraints.
r? ``@compiler-errors``
Update the minimum external LLVM to 14
With this change, we'll have stable support for LLVM 14 through 16 (pending release).
For reference, the previous increase to LLVM 13 was #100460.
Suggest fix for misplaced generic params on fn item #103366fixes#103366
This still has some work to go, but works for 2/3 of the initial base cases described in #1033366
simple fn:
```
error: expected identifier, found `<`
--> shreys/test_1.rs:1:3
|
1 | fn<T> id(x: T) -> T { x }
| ^ expected identifier
|
help: help: place the generic parameter list after the function name:
|
1 | fn id<T>(x: T) -> T { x }
| ~~~~
```
Complicated bounds
```
error: expected identifier, found `<`
--> spanishpear/test_2.rs:1:3
|
1 | fn<'a, B: 'a + std::ops::Add<Output = u32>> f(_x: B) { }
| ^ expected identifier
|
help: help: place the generic parameter list after the function name:
|
1 | fn f<'a, B: 'a + std::ops::Add<Output = u32>>(_x: B) { }
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
Opening a draft PR for comments on approach, particularly I have the following questions:
- [x] Is it okay to be using `err.span_suggestion` over struct derives? I struggled to get the initial implementation (particularly the correct suggestion message) on struct derives, although I think given what I've learned since starting, I could attempt re-doing it with that approach.
- [x] in the case where the snippet cannot be obtained from a span, is the `help` but no suggestion okay? I think yes (also, when does this case occur?)
- [x] are there any red flags for the generalisation of this work for relevant item kinds (i.e. `struct`, `enum`, `trait`, and `union`). My basic testing indicates it does work for those types except the help tip is currently hardcoded to `after the function name` - which should change dependent on the item.
- [x] I am planning to not show the suggestion if there is already a `<` after the item identifier, (i.e. if there are already generics, as after a function name per the original issue). Any major objections?
- [x] Is the style of error okay? I wasn't sure if there was a way to make it display nicer, or if thats handled by span_suggestion
These aren't blocking questions, and I will keep working on:
- check if there is a `<` after the ident (and if so, not showing the suggestion)
- generalize the help message
- figuring out how to write/run/etc ui tests (including reading the docs for them)
- logic cleanups
Note that at the time of this commit, `unic-emoji-char` seems to have
data tables only up to Unicode 5.0, but Unicode is already newer than
this.
A newer emoji such as `🥺` will not be recognized as an emoji
but older emojis such as `🐱` will.
This commit makes intra-doc link tooltips consistent with generated
links in function signatures and item tables, with the format
`itemtype foo::bar::baz`. This way, you can tell if a link points at
a trait or a type (for example) by mousing over it.
See also fce944d4e7
Clearly document intentional UB in mir-opt tests
All of the changed mir-opt test input files did not pass Miri. Now they do.
r? `@cjgillot` because there's a CopyProp test in here that I do not fully understand
fix: improve the suggestion on future not awaited
Considering the following code
```rust
fn foo() -> u8 {
async fn async_fn() -> u8 { 22 }
async_fn()
}
fn main() {}
```
the error generated before this commit from the compiler is
```
➜ rust git:(macros/async_fn_suggestion) ✗ rustc test.rs --edition 2021
error[E0308]: mismatched types
--> test.rs:4:5
|
1 | fn foo() -> u8 {
| -- expected `u8` because of return type
...
4 | async_fn()
| ^^^^^^^^^^ expected `u8`, found opaque type
|
= note: expected type `u8`
found opaque type `impl Future<Output = u8>`
help: consider `await`ing on the `Future`
|
4 | async_fn().await
| ++++++
error: aborting due to previous error
```
In this case the error is nor perfect, and can confuse the user that do not know that the opaque type is the future.
So this commit will propose (and conclude the work start in https://github.com/rust-lang/rust/issues/80658)
to change the string `opaque type` to `future` when applicable and also remove the Expected vs Received note by adding a more specific one regarding the async function that return a future type.
So the new error emitted by the compiler is
```
error[E0308]: mismatched types
--> test.rs:4:5
|
1 | fn foo() -> u8 {
| -- expected `u8` because of return type
...
4 | async_fn()
| ^^^^^^^^^^ expected `u8`, found future
|
note: calling an async function returns a future
--> test.rs:4:5
|
4 | async_fn()
| ^^^^^^^^^^
help: consider `await`ing on the `Future`
|
4 | async_fn().await
| ++++++
error: aborting due to previous error
```
Fixes https://github.com/rust-lang/rust/issues/80658
It remains to rework the case described in the following issue https://github.com/rust-lang/rust/issues/107899 but I think this deserves its own PR after we discuss a little bit how to handle these kinds of cases.
r? `@eholk`
`@rustbot` label +I-async-nominated
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Move folding & visiting traits into type library
This is a rework of #107712, following feedback on that PR.
In particular, this version uses trait aliases to reduce the API churn for trait consumers. Doing so requires a workaround for #107747 until its fix in #107803 is merged into the stage0 compiler; this workaround, which uses conditional compilation based on the `bootstrap` configuration predicate, sits in dedicated commit b409329c for ease of reversion.
The possibility of the `rustc_middle` crate retaining its own distinct versions of each folding/visiting trait, blanket-implemented on all types that implement the respective trait in the type library, was also explored: however since this would necessitate making each `rustc_middle` trait a subtrait of the respective type library trait (so that such blanket implementations can delegate their generic methods), no benefit would be gained.
r? types
Considering the following code
```rust
fn foo() -> u8 {
async fn async_fn() -> u8 { 22 }
async_fn()
}
fn main() {}
```
the error generated before this commit from the compiler is
```
➜ rust git:(macros/async_fn_suggestion) ✗ rustc test.rs --edition 2021
error[E0308]: mismatched types
--> test.rs:4:5
|
1 | fn foo() -> u8 {
| -- expected `u8` because of return type
...
4 | async_fn()
| ^^^^^^^^^^ expected `u8`, found opaque type
|
= note: expected type `u8`
found opaque type `impl Future<Output = u8>`
help: consider `await`ing on the `Future`
|
4 | async_fn().await
| ++++++
error: aborting due to previous error
```
In this case the error is nor perfect, and can confuse the user
that do not know that the opaque type is the future.
So this commit will propose (and conclude the work start in
https://github.com/rust-lang/rust/issues/80658)
to change the string `opaque type` to `future` when applicable
and also remove the Expected vs Received note by adding a more
specific one regarding the async function that return a future type.
So the new error emitted by the compiler is
```
error[E0308]: mismatched types
--> test.rs:4:5
|
1 | fn foo() -> u8 {
| -- expected `u8` because of return type
...
4 | async_fn()
| ^^^^^^^^^^ expected `u8`, found future
|
note: calling an async function returns a future
--> test.rs:4:5
|
4 | async_fn()
| ^^^^^^^^^^
help: consider `await`ing on the `Future`
|
4 | async_fn().await
| ++++++
error: aborting due to previous error
```
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Rollup of 6 pull requests
Successful merges:
- #107340 (rustdoc: merge doctest tooltip with notable traits tooltip)
- #107838 (Introduce `-Zterminal-urls` to use OSC8 for error codes)
- #107922 (Print disk usage in PGO CI script)
- #107931 (Intern span when length is MAX_LEN with parent.)
- #107935 (rustc_ast: Merge impls and reorder methods for attributes and meta items)
- #107986 (layout: deal with placeholders, ICE on bound types)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Introduce `-Zterminal-urls` to use OSC8 for error codes
Terminals supporting the OSC8 Hyperlink Extension can support inline anchors where the text is user defineable but clicking on it opens a browser to a specified URLs, just like `<a href="URL">` does in HTML.
https://gist.github.com/egmontkob/eb114294efbcd5adb1944c9f3cb5feda
Improve the `array::map` codegen
The `map` method on arrays [is documented as sometimes performing poorly](https://doc.rust-lang.org/std/primitive.array.html#note-on-performance-and-stack-usage), and after [a question on URLO](https://users.rust-lang.org/t/try-trait-residual-o-trait-and-try-collect-into-array/88510?u=scottmcm) prompted me to take another look at the core [`try_collect_into_array`](7c46fb2111/library/core/src/array/mod.rs (L865-L912)) function, I had some ideas that ended up working better than I'd expected.
There's three main ideas in here, split over three commits:
1. Don't use `array::IntoIter` when we can avoid it, since that seems to not get SRoA'd, meaning that every step writes things like loop counters into the stack unnecessarily
2. Don't return arrays in `Result`s unnecessarily, as that doesn't seem to optimize away even with `unwrap_unchecked` (perhaps because it needs to get moved into a new LLVM type to account for the discriminant)
3. Don't distract LLVM with all the `Option` dances when we know for sure we have enough items (like in `map` and `zip`). This one's a larger commit as to do it I ended up adding a new `pub(crate)` trait, but hopefully those changes are still straight-forward.
(No libs-api changes; everything should be completely implementation-detail-internal.)
It's still not completely fixed -- I think it needs pcwalton's `memcpy` optimizations still (#103830) to get further -- but this seems to go much better than before. And the remaining `memcpy`s are just `transmute`-equivalent (`[T; N] -> ManuallyDrop<[T; N]>` and `[MaybeUninit<T>; N] -> [T; N]`), so hopefully those will be easier to remove with LLVM16 than the previous subobject copies 🤞
r? `@thomcc`
As a simple example, this test
```rust
pub fn long_integer_map(x: [u32; 64]) -> [u32; 64] {
x.map(|x| 13 * x + 7)
}
```
On nightly <https://rust.godbolt.org/z/xK7548TGj> takes `sub rsp, 808`
```llvm
start:
%array.i.i.i.i = alloca [64 x i32], align 4
%_3.sroa.5.i.i.i = alloca [65 x i32], align 4
%_5.i = alloca %"core::iter::adapters::map::Map<core::array::iter::IntoIter<u32, 64>, [closure@/app/example.rs:2:11: 2:14]>", align 8
```
(and yes, that's a 6**5**-element array `alloca` despite 6**4**-element input and output)
But with this PR it's only `sub rsp, 520`
```llvm
start:
%array.i.i.i.i.i.i = alloca [64 x i32], align 4
%array1.i.i.i = alloca %"core::mem::manually_drop::ManuallyDrop<[u32; 64]>", align 4
```
Similarly, the loop it emits on nightly is scalar-only and horrifying
```nasm
.LBB0_1:
mov esi, 64
mov edi, 0
cmp rdx, 64
je .LBB0_3
lea rsi, [rdx + 1]
mov qword ptr [rsp + 784], rsi
mov r8d, dword ptr [rsp + 4*rdx + 528]
mov edi, 1
lea edx, [r8 + 2*r8]
lea r8d, [r8 + 4*rdx]
add r8d, 7
.LBB0_3:
test edi, edi
je .LBB0_11
mov dword ptr [rsp + 4*rcx + 272], r8d
cmp rsi, 64
jne .LBB0_6
xor r8d, r8d
mov edx, 64
test r8d, r8d
jne .LBB0_8
jmp .LBB0_11
.LBB0_6:
lea rdx, [rsi + 1]
mov qword ptr [rsp + 784], rdx
mov edi, dword ptr [rsp + 4*rsi + 528]
mov r8d, 1
lea esi, [rdi + 2*rdi]
lea edi, [rdi + 4*rsi]
add edi, 7
test r8d, r8d
je .LBB0_11
.LBB0_8:
mov dword ptr [rsp + 4*rcx + 276], edi
add rcx, 2
cmp rcx, 64
jne .LBB0_1
```
whereas with this PR it's unrolled and vectorized
```nasm
vpmulld ymm1, ymm0, ymmword ptr [rsp + 64]
vpaddd ymm1, ymm1, ymm2
vmovdqu ymmword ptr [rsp + 328], ymm1
vpmulld ymm1, ymm0, ymmword ptr [rsp + 96]
vpaddd ymm1, ymm1, ymm2
vmovdqu ymmword ptr [rsp + 360], ymm1
```
(though sadly still stack-to-stack)
fix UB in ancient test
This seems to go back all the way to the [original version of this test](b9aa9def85/src/test/run-pass/regions-mock-trans.rs) from ten years ago... ``@nikomatsakis`` trip down memory lane? ;)
Clearly deallocation is a form of mutation so doing it to a (pointer derived from a) shared reference cannot be legal. Let's use mutable references instead.
rustdoc: account for intra-doc links in `<meta name="description">`
Similar to #86451, but for the SEO descriptions instead of the search descriptions.
Enable new rlib in non stable cases
If bundled static library uses cfg (unstable) or whole-archive (wasn't supported) bundled libs are packed even without packed_bundled_libs.
r? `@petrochenkov`
Rollup of 7 pull requests
Successful merges:
- #107657 (Add only modified subcommand for compiletest)
- #107864 (rustdoc: clean up `write!` calls with less stuttering)
- #107873 (Emit JSON output for the building of bootstrap itself)
- #107895 (remove redundant clones)
- #107897 (Reexported macros docs)
- #107909 (rustdoc: remove redundant `if s.is_empty()` from `find_testable_code`)
- #107912 (rustdoc: Don't resolve link to field on different variant)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Reexported macros docs
Part of #59368 (doesn't fix it, only improve the current situation a bit).
Macros were not correctly handled in reexports and the reexport attributes were not merged with the item either. This PR fixes both.
r? `@notriddle`
simplify layout calculations in rawvec
The use of `Layout::array` was introduced in #83706 which lead to a [perf regression](https://github.com/rust-lang/rust/pull/83706#issuecomment-1048377719).
This PR basically reverts that change since rust currently only supports stride == size types, but to be on the safe side it leaves a const-assert there to make sure this gets caught if those assumptions ever change.
Rollup of 9 pull requests
Successful merges:
- #105019 (Add parentheses properly for borrowing suggestion)
- #106001 (Stop at the first `NULL` argument when iterating `argv`)
- #107098 (Suggest function call on pattern type mismatch)
- #107490 (rustdoc: remove inconsistently-present sidebar tooltips)
- #107855 (Add a couple random projection tests for new solver)
- #107857 (Add ui test for implementation on projection)
- #107878 (Clarify `new_size` for realloc means bytes)
- #107888 (revert #107074, add regression test)
- #107900 (Zero the `REPARSE_MOUNTPOINT_DATA_BUFFER` header)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Implement `deferred_projection_equality` for erica solver
Somewhat of a revival of #96912. When relating projections now emit an `AliasEq` obligation instead of attempting to determine equality of projections that may not be as normalized as possible (i.e. because of lazy norm, or just containing inference variables that prevent us from resolving an impl). Only do this when the new solver is enabled
Add ui test for implementation on projection
The error in full can be seen in https://github.com/rust-lang/rust/pull/107263 and is part of why the PR is blocked (it still requires the approval from the team for supporting it).
r? ``@oli-obk``
Add a couple random projection tests for new solver
Self-explanatory, they're just some cases that have been on my mind in the past (especially `tests/ui/traits/new-solver/param-candidate-doesnt-shadow-project.rs`).
Mir-Opt for copying enums with large discrepancies
I have been meaning to make this for quite a while, based off of this [hackmd](https://hackmd.io/`@ft4bxUsFT5CEUBmRKYHr7w/rJM8BBPzD).`
I'm not sure where to put this opt now that I've made it, so I'd appreciate suggestions on that!
It's also one long chain of statements, not sure if there's a more friendly format to make it.
r? `@tmiasko`
I would `r` oli but he's on leave so he suggested I `r` tmiasko or wesleywiser.
Avoid exposing type parameters and implementation details sourced from macro expansions
Fixes#107745.
~~I would like to **request some guidance** for this issue, because I don't think this is a good fix (a band-aid at best).~~
### The Problem
The code
```rust
fn main() {
println!("{:?}", []);
}
```
gets desugared into (`rustc +nightly --edition=2018 issue-107745.rs -Z unpretty=hir`):
```rust
#[prelude_import]
use std::prelude::rust_2018::*;
#[macro_use]
extern crate std;
fn main() {
{
::std::io::_print(<#[lang = "format_arguments"]>::new_v1(&["",
"\n"], &[<#[lang = "format_argument"]>::new_debug(&[])]));
};
}
```
so the diagnostics code tries to be as specific and helpful as possible, and I think it finds that `[]` needs a type parameter and so does `new_debug`. But since `[]` doesn't have an origin for the type parameter definition, it points to `new_debug` instead and leaks the internal implementation detail since all `[]` has is an type inference variable.
### ~~The Bad Fix~~
~~This PR currently tries to fix the problem by bypassing the generated function `<#[lang = "format_argument"]>::new_debug` to avoid its generic parameter (I think it is auto-generated from the argument `[_; 0]`?) from getting collected as an `InsertableGenericArg`. This is problematic because it also prevents the help from getting displayed.~~
~~I think this fix is not ideal and hard-codes the format generated code pattern, but I can't think of a better fix. I have tried asking on Zulip but no responses there yet.~~
Fix implied outlives bounds logic for projections
The logic here is subtly wrong. I put a bit of an explanation in a767d7b5165cea8ee5cbe494a4a636c50ef67c9c.
TL;DR: we register outlives predicates to be proved, because wf code normalizes projections (from the unnormalized types) to type variables. This causes us to register those as constraints instead of implied. This was "fine", because we later added that implied bound in the normalized type, and delayed registering constraints. When I went to cleanup `free_region_relations` to *not* delay adding constraints, this bug was uncovered.
cc. `@aliemjay` because this caused your test failure in #99832 (I only realized as I was writing this)
r? `@nikomatsakis`
Implement some tweaks in the new solver
I've been testing the new solver on some small codebases, and these are a few small changes I've needed to make.
The most "controversial" here is implementing `trait_candidate_should_be_dropped_in_favor_of`, which I just implemented to always return false. This surprisingly allows some code to compile, without us having to actually decide on any semantics yet.
r? `@rust-lang/initiative-trait-system-refactor`
Terminals supporting the OSC8 Hyperlink Extension can support inline
anchors where the text is user defineable but clicking on it opens a
browser to a specified URLs, just like `<a href="URL">` does in HTML.
https://gist.github.com/egmontkob/eb114294efbcd5adb1944c9f3cb5feda
correctly update goals in the cache
we may want to actually write the response for our goal into the provisional or global cache instead of simply using the result from the last iteration '^^
r? ```@rust-lang/initiative-trait-system-refactor```
Now that the compiler accepts "-Z instrument-xray" option only when
targeting one of the supported targets, make sure to not run the
codegen tests where the compiler will fail.
Like with other compiletests, we don't have access to internals,
so simply hardcode a list of supported architectures here.
This is somewhat important because LLVM enables the pass based on
target architecture, but support by the target OS also matters.
For example, XRay attributes are processed by codegen for macOS
targets, but Apple linker fails to process relocations in XRay
data sections, so the feature as a whole is not supported there
for the time being.
Let's add at least some tests to verify that this option is accepted
and produces expected LLVM attributes. More tests can be added later
with attribute support.
Recognize all bells and whistles that LLVM's XRay pass is capable of.
The always/never settings are a bit dumb without attributes but they're
still there. The default instruction count is chosen by the compiler,
not LLVM pass. We'll do it later.
Make `derive_const` derive properly const-if-const impls
Fixes#107774Fixes#107666
Also fixes rendering of const-if-const bounds in pretty printing.
r? ```@oli-obk``` or ```@fee1-dead```
Extend support for `implies_by` (from `#[stable]` and `#[unstable]`)
to `#[rustc_const_stable]` and `#[rustc_const_unstable]`.
Signed-off-by: David Wood <david.wood@huawei.com>
Remove astconv usage in diagnostic
Fixes#107775
Location of the test sucks, I know, but I needed to put it somewhere 😓
The issue here is that the root cause of the issue has nothing to do with what's being tested, so I couldn't really give it a better name. Oh well.
rustdoc: use a newline instead of `<br>` to format code headers
Since these elements now use `white-space: pre-wrap` since #107615, it's fine to use newlines for formatting, which is smaller and a bit less complicated.
Rename `PointerSized` to `PointerLike`
The old name was unnecessarily vague. This PR renames a nightly language feature that I added, so I don't think it needs any additional approval, though anyone can feel free to speak up if you dislike the rename.
It's still unsatisfying that we don't the user which of {size, alignment} is wrong, but this trait really is just a stepping stone for a more generalized mechanism to create `dyn*`, just meant for nightly testing, so I don't think it really deserves additional diagnostic machinery for now.
Fixes#107696, cc ``@RalfJung``
r? ``@eholk``
Since these elements now use `white-space: pre-wrap` since
784665d4ce, it's fine to use newlines
for formatting, which is smaller and a bit less complicated.
Rollup of 8 pull requests
Successful merges:
- #100599 (Add compiler error E0523 long description and test)
- #107471 (rustdoc: do not include empty default-settings tag in HTML)
- #107555 (Modify existing bounds if they exist)
- #107662 (Turn projections into copies in CopyProp.)
- #107695 (Add test for Future inflating arg size to 3x )
- #107700 (Run the tools builder on all PRs)
- #107706 (Mark 'atomic_mut_ptr' methods const)
- #107709 (Fix problem noticed in PR106859 with char -> u8 suggestion)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Fix problem noticed in PR106859 with char -> u8 suggestion
HN reader `@ayosec` noticed that my #106859 a few weeks back, malfunctions if you have a Unicode escape, the code suggested b'\u{0}' if you tried to use '\u{0}' where a byte should be, when of course b'\u{0}' is not a byte literal, regardless of the codepoint you can't write Unicode escapes in a byte literal at all.
My proposed fix here just checks that the "character" you wrote is fewer than 5 bytes, thus allowing \x7F and similar escapes but conveniently forbidding even the smallest Unicode escape \u{0} before offering the suggestion as before.
I have provided an updated test which includes examples which do and don't work because of this additional rule.
Turn projections into copies in CopyProp.
The current implementation can leave behind projections that are moved out several times.
This PR widens the check to turn such moves into copies: a move out of a projection of a copy is equivalent to a copy of the original projection.
Modify existing bounds if they exist
Fixes#107335.
This implementation is kinda gross but I don't really see a better way to do it.
This primarily does two things: Modifies `suggest_constraining_type_param` to accept a new parameter that indicates a span to be replaced instead of added, if presented, and limit the additive suggestions to either suggest a new bound on an existing bound (see newly added unit test) or add the generics argument if a generics argument wasn't found.
The former change is required to retain the capability to add an entirely new bounds if it was entirely omitted.
r? ``@compiler-errors``
Fix suggestions rendering when the diff span is multiline
Fixes#92741
cc `@estebank`
I think, I finally fixed. I still want to go back and try to clean up the code a bit. I'm open to suggestions.
Some examples of the new suggestions:
```
help: consider removing the borrow
|
2 - &
|
```
```
help: consider removing the borrow
|
2 - &
3 - mut
|
```
```
help: consider removing the borrow
|
2 - &
3 - mut if true { true } else { false }
2 + if true { true } else { false }
|
```
Should we add a test to ensure this behavior doesn't disappear in the future?
There is a distinction between running this on wasm and i686, even though they should be
identical. This technically is not _incorrect_, it's just an unexpected difference, which is
worth investigating, but not for correctness.
Since we're changing a bunch of stuff, necessary to remove some codegen tests
which look for specific things. Also attempting to restart a test which timed out, maybe due to
fastly failing?
This adds one more test that should track improvements to generator
layout, like #62958 and #62575.
In particular, this test highlights suboptimal layout, as the storage
for the argument future is not being reused across its usage as `upvar`,
`local` and `awaitee` (being polled to completion).
make &mut !Unpin not dereferenceable, and Box<!Unpin> not noalias
See https://github.com/rust-lang/unsafe-code-guidelines/issues/381 and [this LLVM discussion](https://discourse.llvm.org/t/interaction-of-noalias-and-dereferenceable/66979). The exact semantics of how `noalias` and `dereferenceable` interact are unclear, and `@comex` found a case of LLVM actually exploiting that ambiguity for optimizations. I think for now we should treat LLVM `dereferenceable` as implying a "fake read" to happen immediately at the top of the function (standing in for the spurious reads that LLVM might introduce), and that fake read is subject to all the usual `noalias` restrictions. This means we cannot put `dereferenceable` on `&mut !Unpin` references as those references can alias with other references that are being read and written inside the function (e.g. for self-referential generators), meaning the fake read introduces aliasing conflicts with those other accesses.
For `&` this is already not a problem due to https://github.com/rust-lang/rust/pull/98017 which removed the `dereferenceable` attribute for other reasons.
Regular `&mut Unpin` references are unaffected, so I hope the impact of this is going to be tiny.
The first commit does some refactoring of the `PointerKind` enum since I found the old code very confusing each time I had to touch it. It doesn't change behavior.
Fixes https://github.com/rust-lang/miri/issues/2714
EDIT: Turns out our `Box<!Unpin>` treatment was incorrect, too, so the PR also fixes that now (in codegen and Miri): we do not put `noalias` on these boxes any more.
Sort Generator `print-type-sizes` according to their yield points
Especially when trying to diagnose runaway future sizes, it might be more intuitive to sort the variants according to the control flow (aka their yield points) rather than the size of the variants.
Refine error spans for "The trait bound `T: Trait` is not satisfied" when passing literal structs/tuples
This PR adds a new heuristic which refines the error span reported for "`T: Trait` is not satisfied" errors, by "drilling down" into individual fields of structs/enums/tuples to point to the "problematic" value.
Here's a self-contained example of the difference in error span:
```rs
struct Burrito<Filling> {
filling: Filling,
}
impl <Filling: Delicious> Delicious for Burrito<Filling> {}
fn eat_delicious_food<Food: Delicious>(food: Food) {}
fn will_type_error() {
eat_delicious_food(Burrito { filling: Kale });
// ^~~~~~~~~~~~~~~~~~~~~~~~~ (before) The trait bound `Kale: Delicious` is not satisfied
// ^~~~ (after) The trait bound `Kale: Delicious` is not satisfied
}
```
(kale is fine, this is just a silly food-based example)
Before this PR, the error span is identified as the entire argument to the generic function `eat_delicious_food`. However, since only `Kale` is the "problematic" part, we can point at it specifically. In particular, the primary error message itself mentions the missing `Kale: Delicious` trait bound, so it's much clearer if this part is called out explicitly.
---
The _existing_ heuristic tries to label the right function argument in `point_at_arg_if_possible`. It goes something like this:
- Look at the broken base trait `Food: Delicious` and find which generics it mentions (in this case, only `Food`)
- Look at the parameter type definitions and find which of them mention `Filling` (in this case, only `food`)
- If there is exactly one relevant parameter, label the corresponding argument with the error span, instead of the entire call
This PR extends this heuristic by further refining the resulting expression span in the new `point_at_specific_expr_if_possible` function. For each `impl` in the (broken) chain, we apply the following strategy:
The strategy to determine this span involves connecting information about our generic `impl`
with information about our (struct) type and the (struct) literal expression:
- Find the `impl` (`impl <Filling: Delicious> Delicious for Burrito<Filling>`)
that links our obligation (`Kale: Delicious`) with the parent obligation (`Burrito<Kale>: Delicious`)
- Find the "original" predicate constraint in the impl (`Filling: Delicious`) which produced our obligation.
- Find all of the generics that are mentioned in the predicate (`Filling`).
- Examine the `Self` type in the `impl`, and see which of its type argument(s) mention any of those generics.
- Examing the definition for the `Self` type, and identify (for each of its variants) if there's a unique field
which uses those generic arguments.
- If there is a unique field mentioning the "blameable" arguments, use that field for the error span.
Before we do any of this logic, we recursively call `point_at_specific_expr_if_possible` on the parent
obligation. Hence we refine the `expr` "outwards-in" and bail at the first kind of expression/impl we don't recognize.
This function returns a `Result<&Expr, &Expr>` - either way, it returns the `Expr` whose span should be
reported as an error. If it is `Ok`, then it means it refined successfull. If it is `Err`, then it may be
only a partial success - but it cannot be refined even further.
---
I added a new test file which exercises this new behavior. A few existing tests were affected, since their error spans are now different. In one case, this leads to a different code suggestion for the autofix - although the new suggestion isn't _wrong_, it is different from what used to be.
This change doesn't create any new errors or remove any existing ones, it just adjusts the spans where they're presented.
---
Some considerations: right now, this check occurs in addition to some similar logic in `adjust_fulfillment_error_for_expr_obligation` function, which tidies up various kinds of error spans (not just trait-fulfillment error). It's possible that this new code would be better integrated into that function (or another one) - but I haven't looked into this yet.
Although this code only occurs when there's a type error, it's definitely not as efficient as possible. In particular, there are definitely some cases where it degrades to quadratic performance (e.g. for a trait `impl` with 100+ generic parameters or 100 levels deep nesting of generic types). I'm not sure if these are realistic enough to worry about optimizing yet.
There's also still a lot of repetition in some of the logic, where the behavior for different types (namely, `struct` vs `enum` variant) is _similar_ but not the same.
---
I think the biggest win here is better targeting for tuples; in particular, if you're using tuples + traits to express variadic-like functions, the compiler can't tell you which part of a tuple has the wrong type, since the span will cover the entire argument. This change allows the individual field in the tuple to be highlighted, as in this example:
```
// NEW
LL | want(Wrapper { value: (3, q) });
| ---- ^ the trait `T3` is not implemented for `Q`
// OLD
LL | want(Wrapper { value: (3, q) });
| ---- ^~~~~~~~~~~~~~~~~~~~~~~~~ the trait `T3` is not implemented for `Q`
```
Especially with large tuples, the existing error spans are not very effective at quickly narrowing down the source of the problem.
Rollup of 5 pull requests
Successful merges:
- #107553 (Suggest std::ptr::null if literal 0 is given to a raw pointer function argument)
- #107580 (Recover from lifetimes with default lifetimes in generic args)
- #107669 (rustdoc: combine duplicate rules in ayu CSS)
- #107685 (Suggest adding a return type for async functions)
- #107687 (Adapt SROA MIR opt for aggregated MIR)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Adapt SROA MIR opt for aggregated MIR
The pass was broken by https://github.com/rust-lang/rust/pull/107267.
This PR extends it to replace:
```
x = Struct { 0: a, 1: b }
y = move? x
```
by assignment between locals
```
x_0 = a
x_1 = b
y_0 = move? x_0
y_1 = move? x_1
```
The improved pass runs to fixpoint, so we can flatten nested field accesses.
Suggest std::ptr::null if literal 0 is given to a raw pointer function argument
Implementation feels a little sus (we're parsing the span for a `0`) but it seems to fall in line the string-expected-found-char condition right above this check, so I think it's fine.
Feedback appreciated on help text? I think it's consistent but it does sound a little awkward maybe?
Fixes#107517
Adds the extended error documentation for E0523 to indicate that the
error is no longer produced by the compiler.
Update the E0464 documentation to include example code that produces the
error.
Remove the error message E0523 from the compiler and replace it with an
internal compiler error.
The code that consumes PointerKind (`adjust_for_rust_scalar` in rustc_ty_utils)
ended up using PointerKind variants to talk about Rust reference types (& and
&mut) anyway, making the old code structure quite confusing: one always had to
keep in mind which PointerKind corresponds to which type. So this changes
PointerKind to directly reflect the type.
This does not change behavior.
don't point at nonexisting code beyond EOF when warning about delims
Previously we would show this:
```
warning: unnecessary braces around block return value
--> /tmp/bad.rs:1:8
|
1 | fn a(){{{
| ^ ^
|
= note: `#[warn(unused_braces)]` on by default
help: remove these braces
|
1 - fn a(){{{
1 + fn a(){{
|
```
which is now hidden in this case.
We would create a span spanning between the pair of redundant {}s but there is only EOF instead of the `}` so we would previously point at nothing. This would cause the debug assertion ice to trigger. I would have loved to just only point at the second delim and say "you can remove that" but I'm not sure how to do that without refactoring the entire diagnostic which seems tricky. :( But given that this does not seem to regress any other tests we have, I think this edge-casey enough be acceptable.
Fixes https://github.com/rust-lang/rust/issues/107423
r? `@compiler-errors`
Especially when trying to diagnose runaway future sizes, it might be
more intuitive to sort the variants according to the control flow
(aka their yield points) rather than the size of the variants.
Previously we would show this:
```
warning: unnecessary braces around block return value
--> /tmp/bad.rs:1:8
|
1 | fn a(){{{
| ^ ^
|
= note: `#[warn(unused_braces)]` on by default
help: remove these braces
|
1 - fn a(){{{
1 + fn a(){{
|
```
which is now hidden in this case.
We would create a span spanning between the pair of redundant {}s but there is only EOF instead of the `}` so we would previously point at nothing.
This would cause the debug assertion ice to trigger.
I would have loved to just only point at the second delim and say "you can remove that" but I'm not sure how to do that without refactoring the entire diagnostic which seems tricky. :(
But given that this does not seem to regress any other tests we have, I think this edge-casey enough be acceptable.
Fixes https://github.com/rust-lang/rust/issues/107423
r? @compiler-errors
Replace nbsp in all rustdoc code blocks
Based on #106125 by `@dtolnay` — this PR fixes the line wrapping bug.
Fixes#106098. This makes code copyable from rustdoc rendered documentation into a Rust source file.
Fix suggestion for coercing Option<&String> to Option<&str>
Fixes#107604
This also makes the diagnostic `MachineApplicable`, and runs `rustfix` to check we're not producing incorrect code.
``@rustbot`` label +A-diagnostics
Don't cause a cycle when formatting query description that references a FnDef
When a function returns `-> _`, we use typeck to compute what the resulting type of the body _should_ be. If we call another query inside of typeck and hit a cycle error, we attempt to report the cycle error which requires us to compute all of the query descriptions for the stack.
However, if one of the queries in that cycle has a query description that references this function as a FnDef type, we'll cause a *second* cycle error from within the cycle error reporting code, since rendering a FnDef requires us to compute its signature. This causes an unwrap to ICE, since during the *second* cycle reporting code, we try to look for a job that isn't in the active jobs list.
We can avoid this by using `with_no_queries!` when computing these query descriptions.
Fixes#107089
The only drawback is that the rendering of opaque types in cycles regresses a bit :| I'm open to alternate suggestions about how we may handle this...
Emit warnings on unused parens in index expressions
Fixes: #96606.
I am not sure what the best term for "index expression" is. Is there a better term we could use?
Don't generate unecessary `&&self.field` in deriving Debug
Since unsized fields may only be the last one in a struct, we only need to generate a double reference (`&&self.field`) for the final one.
cc `@nnethercote`
Suggest `{var:?}` when finding `{?:var}` in inline format strings
Link to issue: https://github.com/rust-lang/rust/issues/106572
This is my first PR to this project, so hopefully I can get some good pointers with me from the first PR.
Currently my idea was to test out whether or not this is the correct solution to this issue and then hopefully expand upon the idea to not only work for Debug formatting but for all of them. If this is a valid solution, I will create a new issue to give a better error message to a broader range of wrong-order formatting.
Erase regions before doing uninhabited check in borrowck
~Also, fingerprint query keys/values when debug assertions are enabled. This should make it easier to check for issues like this without `-Cincremental`, and make UI tests a bit cleaner.~ edit: moving that to a separate PR
Fixes#107505
Remove both StorageLive and StorageDead in CopyProp.
Fixes https://github.com/rust-lang/rust/issues/107511https://github.com/rust-lang/rust/pull/106908 removed StorageDead without the accompanying StorageLive. In loops, execution would see repeated StorageLive, without any StorageDead, which is UB.
So when removing storage statements, we have to remove both StorageLive and StorageDead.
~I also added a MIR validation pass for StorageLive. It may be a bit overzealous.~
Improve diagnostic for missing space in range pattern
Improves the diagnostic in #107425 by turning it into a note explaining the parsing issue.
r? `@compiler-errors`
Revert "Teach parser to understand fake anonymous enum syntax" and related commits
anonymous enum types are currently ambiguous in positions like:
* `|` operator: `a as fn() -> B | C`
* closure args: `|_: as fn() -> A | B`
I first tried to thread around `RecoverAnonEnum` into all these positions, but the resulting complexity in the compiler is IMO not worth it, or at least worth a bit more thinking time. In the mean time, let's revert this syntax for now, so we can go back to the drawing board.
Fixes#107461
cc: `@estebank` `@cjgillot` #106960
---
### Squashed revert commits:
Revert "review comment: Remove AST AnonTy"
This reverts commit 020cca8d36.
Revert "Ensure macros are not affected"
This reverts commit 12d18e4031.
Revert "Emit fewer errors on patterns with possible type ascription"
This reverts commit c847a01a3b.
Revert "Teach parser to understand fake anonymous enum syntax"
This reverts commit 2d82420665.
Revert "review comment: Remove AST AnonTy"
This reverts commit 020cca8d36.
Revert "Ensure macros are not affected"
This reverts commit 12d18e4031.
Revert "Emit fewer errors on patterns with possible type ascription"
This reverts commit c847a01a3b.
Revert "Teach parser to understand fake anonymous enum syntax"
This reverts commit 2d82420665.
Add proc-macro boilerplate to crt-static test
I was seeing this failure when running ui tests with with a `-Cpanic=abort` stdlib targeting fuchsia:
```
---- [ui] tests/ui/proc-macro/crt-static.rs stdout ----
normalized stderr:
warning: building proc macro crate with `panic=abort` may crash the compiler should the proc-macro panic
warning: 1 warning emitted
The actual stderr differed from the expected stderr.
```
`force-host` was enough to stop it from running/failing, not sure if I should also add `needs-unwind`?
Fix syntax in `-Zunpretty-expanded` output for derived `PartialEq`.
If you do `derive(PartialEq)` on a packed struct, the output shown by `-Zunpretty=expanded` includes expressions like this:
```
{ self.x } == { other.x }
```
This is invalid syntax. This doesn't break compilation, because the AST nodes are constructed within the compiler. But it does mean anyone using `-Zunpretty=expanded` output as a guide for hand-written impls could get a nasty surprise.
This commit fixes things by instead using this form:
```
({ self.x }) == ({ other.x })
```
r? ``@RalfJung``
Remove confusing 'while checking' note from opaque future type mismatches
Maybe I'm just misinterpreting the wording of the note. The only value I can see in this note is that it points out where the async's opaque future is coming from, but the way it's doing it is misleading IMO.
For example:
```rust
note: while checking the return type of the `async fn`
--> $DIR/dont-suggest-missing-await.rs:7:24
|
LL | async fn make_u32() -> u32 {
| ^^^ checked the `Output` of this `async fn`, found opaque type
```
We point at the type `u32` in the HIR, but then say "found opaque type". We also say "while checking"... but we're typechecking a totally different function when we get this type mismatch!
r? ``@estebank`` but feel free to reassign and/or take your time reviewing this. I'd be inclined to also discuss reworking the presentation of this type mismatch to restore some of these labels in a way that makes it more clear what it's trying to point out.
The check previously matched this, and suggested adding a missing
`struct`:
pub Foo(...):
It was probably intended to match this instead (semicolon instead of
colon):
pub Foo(...);
Strengthen validation of FFI attributes
Previously, `codegen_attrs` validated the attributes `#[ffi_pure]`, `#[ffi_const]`, and `#[ffi_returns_twice]` to make sure that they were only used on foreign functions. However, this validation was insufficient in two ways:
1. `codegen_attrs` only sees items for which code must be generated, so it was unable to raise errors when the attribute was incorrectly applied to macros and the like.
2. the validation code only checked that the item with the attr was foreign, but not that it was a foreign function, allowing these attributes to be applied to foreign statics as well.
This PR moves the validation to `check_attr`, which sees all items. It additionally changes the validation to ensure that the attribute's target is `Target::ForeignFunction`, only allowing the attributes on foreign functions and not foreign statics. Because these attributes are unstable, there is no risk for backwards compatibility. The changes also ending up making the code much easier to read.
This PR is best reviewed commit by commit. Additionally, I was considering moving the tests to the `attribute` subdirectory, to get them out of the general UI directory. I could do that as part of this PR or a follow-up, as the reviewer prefers.
CC: #58328, #58329
Do not depend on Generator trait when deducing closure signature
1. Do not depend on `Generator` trait when deducing closure signature.
2. Compare the name of the `Generator::Return` associated item, rather than its order in the trait. Seems more stable this way.
Fixing confusion between mod and remainder
Like many programming languages, rust too confuses remainder and modulus. The `%` operator and the associated `Rem` trait is (as the trait name suggests) the remainder, but since most people are linguistically more familiar with the modulus the documentation sometimes claims otherwise. This PR tries to fix this problem in rustc.
If you do `derive(PartialEq)` on a packed struct, the output shown by
`-Zunpretty=expanded` includes expressions like this:
```
{ self.x } == { other.x }
```
This is invalid syntax. This doesn't break compilation, because the AST
nodes are constructed within the compiler. But it does mean anyone using
`-Zunpretty=expanded` output as a guide for hand-written impls could get
a nasty surprise.
This commit fixes things by instead using this form:
```
({ self.x }) == ({ other.x })
```
Modify primary span label for E0308
Looking at the reactions to https://hachyderm.io/`@ekuber/109622160673605438,` a lot of people seem to have trouble understanding the current output, where the primary span label on type errors talks about the specific types that diverged, but these can be deeply nested type parameters. Because of that we could see "expected i32, found u32" in the label while the note said "expected Vec<i32>, found Vec<u32>". This understandably confuses people. I believe that once people learn to read these errors it starts to make more sense, but this PR changes the output to be more in line with what people might expect, without sacrificing terseness.
Fix#68220.
incremental: migrate diagnostics
- Apply the diagnostic migration lints to more functions on `Session`, namely: `span_warn`, `span_warn_with_code`, `warn` `note_without_error`, `span_note_without_error`, `struct_note_without_error`.
- Add impls of `IntoDiagnosticArg` for `std::io::Error`, `std::path::Path` and `std::path::PathBuf`.
- Migrate the `rustc_incremental` crate's diagnostics to translatable diagnostic structs.
r? `@compiler-errors`
cc #100717
Use `ObligationCtxt::new_in_snapshot` in `satisfied_from_param_env`
We can evaluate nested `ConstEvaluatable` obligations in an evaluation probe, which will ICE if we use `ObligationCtxt::new`.
Fixes#107474Fixes#106666
r? `@BoxyUwU` but feel free to reassign
cc `@JulianKnodt` who i think added this assertion code
Not sure if the rustdoc test is needed, but can't hurt. They're the same root cause, though.
Implement unsizing in the new trait solver
This makes hello world compile! Ignore the first commit, that's just #107146 which is waiting on merge.
I'll leave some comments inline about design choices that might be debatable.
r? `@lcnr` (until we have a new trait solver reviewer group...)
Fix invalid float literal suggestions when recovering an integer
Only suggest adding a zero to integers with a preceding dot when the change will result in a valid floating point literal.
For example, `.0x0` should not be turned into `0.0x0`.
r? nnethercote
Only suggest adding a zero to integers with a preceding dot when the change will
result in a valid floating point literal.
For example, `.0x0` should not be turned into `0.0x0`.
Change turbofish context link to an archive link
The original tweet in the chain linked to (via quote tweet), and thus the through line of links back to Anna's tweet where she named the turbofish (https://web.archive.org/web/20210911061514/https://twitter.com/whoisaldeka/status/914914008225816576) are lost as the user whoisaldeka has deleted their twitter account.
Switching to an archive link preserves this through line, allowing someone to browse back to see the point at which Anna created the turbofish, as was the original intent of including this context.
I was sharing this test with some friends as I often do, and noticed the changes (I had only seen the version from before her death previously). Looking for context myself, I realized the deleted twitter account was breaking an important link in the chain for the context of who Anna was to begin with, and the exact moment the turbofish was so named.
As an alternative to using an archive, we could link to both the tweet where Anna names the turbofish, and the tweet where she refers to herself as its guardian, as two separate links - not requiring the quote tweet to connect them.
The original tweet in the chain linked to, and thus the through line of links back to Anna's tweet where she named the turbofish (https://web.archive.org/web/20210911061514/https://twitter.com/whoisaldeka/status/914914008225816576) are lost as the user whoisaldeka has deleted their twitter account.
Switching to an archive link preserves this through line, allowing someone to browse back to see the point at which Anna created the turbofish, as was the original intent of including this context.
Don't re-export private/unstable ArgumentV1 from `alloc`.
The `alloc::fmt::ArgumentV1` re-export was marked as `#[stable]` even though the original `core::fmt::ArgumentV1` is `#[unstable]` (and `#[doc(hidden)]`).
(It wasn't usable though:
```
error[E0658]: use of unstable library feature 'fmt_internals': internal to format_args!
--> src/main.rs:4:12
|
4 | let _: alloc::fmt::ArgumentV1 = todo!();
| ^^^^^^^^^^^^^^^^^^^^^^
|
= help: add `#![feature(fmt_internals)]` to the crate attributes to enable
```
)
Part of #99012
Currently, deriving on packed structs has some non-trivial limitations,
related to the fact that taking references on unaligned fields is UB.
The current approach to field accesses in derived code:
- Normal case: `&self.0`
- In a packed struct that derives `Copy`: `&{self.0}`
- In a packed struct that doesn't derive `Copy`: `&self.0`
Plus, we disallow deriving any builtin traits other than `Default` for any
packed generic type, because it's possible that there might be
misaligned fields. This is a fairly broad restriction.
Plus, we disallow deriving any builtin traits other than `Default` for most
packed types that don't derive `Copy`. (The exceptions are those where the
alignments inherently satisfy the packing, e.g. in a type with
`repr(packed(N))` where all the fields have alignments of `N` or less
anyway. Such types are pretty strange, because the `packed` attribute is
not having any effect.)
This commit introduces a new, simpler approach to field accesses:
- Normal case: `&self.0`
- In a packed struct: `&{self.0}`
In the latter case, this requires that all fields impl `Copy`, which is
a new restriction. This means that the following example compiles under
the old approach and doesn't compile under the new approach.
```
#[derive(Debug)]
struct NonCopy(u8);
#[derive(Debug)
#[repr(packed)]
struct MyType(NonCopy);
```
(Note that the old approach's support for cases like this was brittle.
Changing the `u8` to a `u16` would be enough to stop it working. So not
much capability is lost here.)
However, the other constraints from the old rules are removed. We can now
derive builtin traits for packed generic structs like this:
```
trait Trait { type A; }
#[derive(Hash)]
#[repr(packed)]
pub struct Foo<T: Trait>(T, T::A);
```
To allow this, we add a `T: Copy` bound in the derived impl and a `T::A:
Copy` bound in where clauses. So `T` and `T::A` must impl `Copy`.
We can now also derive builtin traits for packed structs that don't derive
`Copy`, so long as the fields impl `Copy`:
```
#[derive(Hash)]
#[repr(packed)]
pub struct Foo(u32);
```
This includes types that hand-impl `Copy` rather than deriving it, such as the
following, that show up in winapi-0.2:
```
#[derive(Clone)]
#[repr(packed)]
struct MyType(i32);
impl Copy for MyType {}
```
The new approach is simpler to understand and implement, and it avoids
the need for the `unsafe_derive_on_repr_packed` check.
One exception is required for backwards-compatibility: we allow `[u8]`
fields for now. There is a new lint for this,
`byte_slice_in_packed_struct_with_derive`.
Rollup of 11 pull requests
Successful merges:
- #96763 (Fix maintainer validation message)
- #106540 (Insert whitespace to avoid ident concatenation in suggestion)
- #106763 (print why a test was ignored if its the only test specified)
- #106769 (libtest: Print why a test was ignored if it's the only test specified.)
- #106798 (Implement `signum` with `Ord`)
- #107006 (Output tree representation on thir-tree)
- #107078 (Update wording of invalid_doc_attributes docs.)
- #107169 (Pass `--locked` to the x test tidy call)
- #107431 (docs: remove colon from time header)
- #107432 (rustdoc: remove unused class `has-srclink`)
- #107448 (When stamp doesn't exist, should say Error, and print path to stamp file)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Output tree representation on thir-tree
The current output of `-Zunpretty=thir-tree` is really cumbersome to work with, using an actual tree representation should make it easier to see what the thir looks like.
Insert whitespace to avoid ident concatenation in suggestion
This PR tweaks the suggestion of removing misplaced parentheses around trait bounds so as to avoid concatenating two identifiers. Although subtle, this should make outputs less surprising especially when applying the `MachineApplicable` suggestions automatically.
Implement simple CopyPropagation based on SSA analysis
This PR extracts the "copy propagation" logic from https://github.com/rust-lang/rust/pull/106285.
MIR may produce chains of assignment between locals, like `_x = move? _y`.
This PR attempts to remove such chains by unifying locals.
The current implementation is a bit overzealous in turning moves into copies, and in removing storage statements.
Skip possible where_clause_object_safety lints when checking `multiple_supertrait_upcastable`
Fix#106247
To achieve this, I lifted the `WhereClauseReferencesSelf` out from `object_safety_violations` and move it into `is_object_safe` (which is changed to a new query).
cc `@dtolnay`
r? `@compiler-errors`
Rollup of 8 pull requests
Successful merges:
- #106618 (Disable `linux_ext` in wasm32 and fortanix rustdoc builds.)
- #107097 (Fix def-use dominance check)
- #107154 (library/std/sys_common: Define MIN_ALIGN for m68k-unknown-linux-gnu)
- #107397 (Gracefully exit if --keep-stage flag is used on a clean source tree)
- #107401 (remove the usize field from CandidateSource::AliasBound)
- #107413 (make more pleasant to read)
- #107422 (Also erase substs for new infcx in pin move error)
- #107425 (Check for missing space between fat arrow and range pattern)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Check for missing space between fat arrow and range pattern
Fixes#107420
Ideally we wouldn't emit an error about expecting `=>` etc., but I'm not sure how to recover from this.
`@rustbot` label +A-diagnostics
Also erase substs for new infcx in pin move error
The code originally correctly erased the regions of the type it passed to the newly created infcx. But after the `fn_sig` query was made to return an `EarlyBinder<T>`, some substs that were around were substituted there without erasing their regions. They were then passed into the newly cerated infcx, which caused the ICE.
Fixes#107419
r? compiler-errors who reviewed the original PR adding this diagnostic
Fix def-use dominance check
A definition does not dominate a use in the same statement. For example
in MIR generated for compound assignment x += a (when overflow checks
are disabled).
Use stable metric for const eval limit instead of current terminator-based logic
This patch adds a `MirPass` that inserts a new MIR instruction `ConstEvalCounter` to any loops and function calls in the CFG. This instruction is used during Const Eval to count against the `const_eval_limit`, and emit the `StepLimitReached` error, replacing the current logic which uses Terminators only.
The new method of counting loops and function calls should be more stable across compiler versions (i.e., not cause crates that compiled successfully before, to no longer compile when changes to the MIR generation/optimization are made).
Also see: #103877
Special-case deriving `PartialOrd` for enums with dataless variants
I was able to get slightly better codegen by flipping the derived `PartialOrd` logic for two-variant enums. I also tried to document the implementation of the derive macro to make the special-case logic a little clearer.
```rs
#[derive(PartialEq, PartialOrd)]
pub enum A<T> {
A,
B(T)
}
```
```diff
impl<T: ::core::cmp::PartialOrd> ::core::cmp::PartialOrd for A<T> {
#[inline]
fn partial_cmp(
&self,
other: &A<T>,
) -> ::core::option::Option<::core::cmp::Ordering> {
let __self_tag = ::core::intrinsics::discriminant_value(self);
let __arg1_tag = ::core::intrinsics::discriminant_value(other);
- match ::core::cmp::PartialOrd::partial_cmp(&__self_tag, &__arg1_tag) {
- ::core::option::Option::Some(::core::cmp::Ordering::Equal) => {
- match (self, other) {
- (A::B(__self_0), A::B(__arg1_0)) => {
- ::core::cmp::PartialOrd::partial_cmp(__self_0, __arg1_0)
- }
- _ => ::core::option::Option::Some(::core::cmp::Ordering::Equal),
- }
+ match (self, other) {
+ (A::B(__self_0), A::B(__arg1_0)) => {
+ ::core::cmp::PartialOrd::partial_cmp(__self_0, __arg1_0)
}
- cmp => cmp,
+ _ => ::core::cmp::PartialOrd::partial_cmp(&__self_tag, &__arg1_tag),
}
}
}
```
Godbolt: [Current](https://godbolt.org/z/GYjEzG1T8), [New](https://godbolt.org/z/GoK78qx15)
I'm not sure how common a case comparing two enums like this (such as `Option`) is, and if it's worth the slowdown of adding a special case to the derive. If it causes overall regressions it might be worth just manually implementing this for `Option`.
The code originally correctly erased the regions of the type it passed
to the newly created infcx. But after the `fn_sig` query was made to
return an `EarlyBinder<T>`, some substs that were around were
substituted there without erasing their regions. They were then passed
into the newly cerated infcx, which caused the ICE.
Remove HirId -> LocalDefId map from HIR.
Having this map in HIR prevents the creating of new definitions after HIR has been built.
Thankfully, we do not need it.
Based on https://github.com/rust-lang/rust/pull/103902
Detect references to non-existant messages in Fluent resources
Should help with cases like #107091, where `{variable}` (a message reference) is accidentally typed, rather than `{$variable}` (a variable reference)
Fixes#107370
```@rustbot``` label +A-translation
Improve unexpected close and mismatch delimiter hint in TokenTreesReader
Fixes#103882Fixes#68987Fixes#69259
The inner indentation mismatching will be covered by outer block, the new added function `report_error_prone_delim_block` will find out the error prone candidates for reporting.
Remove overlapping parts of multipart suggestions
This PR adds a debug assertion that the parts of a single substitution cannot overlap, fixes a overlapping substitution from the testsuite, and fixes https://github.com/rust-lang/rust/issues/106870.
Note that a single suggestion can still have multiple overlapping substitutions / possible edits, we just don't suggest overlapping replacements in a single edit anymore.
I've also included a fix for an unrelated bug where rustfix for `explicit_outlives_requirements` would produce multiple trailing commas for a where clause.
Don't merge vtables when full debuginfo is enabled.
This PR makes the compiler not emit the `unnamed_addr` attribute for vtables when full debuginfo is enabled, so that they don't get merged even if they have the same contents. This allows debuggers to more reliably map from a dyn pointer to the self-type of a trait object by looking at the vtable's debuginfo.
The PR only changes the behavior of the LLVM backend as other backends don't emit vtable debuginfo (as far as I can tell).
The performance impact of this change should be small as [measured](https://github.com/rust-lang/rust/pull/103514#issuecomment-1290833854) in a previous PR.
internally change regions to be covariant
Surprisingly, we consider the reference type `&'a T` to be contravaraint in its lifetime parameter. This is confusing and conflicts with the documentation we have in the reference, rustnomicon, and rustc-dev-guide. This also arguably not the correct use of terminology since we can use `&'static u8` in a place where `&' a u8` is expected, this implies that `&'static u8 <: &' a u8` and consequently `'static <: ' a`, hence covariance.
Because of this, when relating two types, we used to switch the argument positions in a confusing way:
`Subtype(&'a u8 <: &'b u8) => Subtype('b <: 'a) => Outlives('a: 'b) => RegionSubRegion('b <= 'a)`
The reason for the current behavior is probably that we wanted `Subtype('b <: 'a)` and `RegionSubRegion('b <= 'a)` to be equivalent, but I don' t think this is a good reason since these relations are sufficiently different in that the first is a relation in the subtyping lattice and is intrinsic to the type-systems, while the the second relation is an implementation detail of regionck.
This PR changes this behavior to use covariance, so..
`Subtype(&'a u8 <: &'b u8) => Subtype('a <: 'b) => Outlives('a: 'b) => RegionSubRegion('b <= 'a) `
Resolves#103676
r? `@lcnr`
Correct suggestions for closure arguments that need a borrow
Fixes#107301 by dealing with binders correctly
Fixes another issue where we were suggesting adding just `&` when we expected `&mut _` in a closure arg
Recover from more const arguments that are not wrapped in curly braces
Recover from some array, borrow, tuple & arithmetic expressions in const argument positions that lack curly braces and provide a suggestion to fix the issue continuing where #92884 left off. Examples of such expressions: `[]`, `[0]`, `[1, 2]`, `[0; 0xff]`, `&9`, `("", 0)` and `(1 + 2) * 3` (we previously did not recover from them).
I am not entirely happy with my current solution because the code that recovers from `[0]` (coinciding with a malformed slice type) and `[0; 0]` (coinciding with a malformed array type) is quite fragile as the aforementioned snippets are actually successfully parsed as types by `parse_ty` since it itself already recovers from them (returning `[⟨error⟩]` and `[⟨error⟩; 0]` respectively) meaning I have to manually look for `TyKind::Err`s and construct a separate diagnostic for the suggestion to attach to (thereby emitting two diagnostics in total).
Fixes#81698.
`@rustbot` label A-diagnostics
r? diagnostics
Compute generator saved locals on MIR
Generators are currently type-checked by introducing a `witness` type variable, which is unified with a `GeneratorWitness(captured types)` whose purpose is to ensure that the auto traits correctly migrate from the captured types to the `witness` type. This requires computing the captured types on HIR during type-checking, only to re-do it on MIR later.
This PR proposes to drop the HIR-based computation, and only keep the MIR one. This is done in 3 steps.
1. During type-checking, the `witness` type variable is never unified. This allows to stall all the obligations that depend on it until the end of type-checking. Then, the stalled obligations are marked as successful, and saved into the typeck results for later verification.
2. At type-checking writeback, `witness` is replaced by `GeneratorWitnessMIR(def_id, substs)`. From this point on, all trait selection involving `GeneratorWitnessMIR` will fetch the MIR-computed locals, similar to what opaque types do. There is no lifetime to be preserved here: we consider all the lifetimes appearing in this witness type to be higher-ranked.
3. After borrowck, the stashed obligations are verified against the actually computed types, in the `check_generator_obligations` query. If any obligation was wrongly marked as fulfilled in step 1, it should be reported here.
There are still many issues:
- ~I am not too happy having to filter out some locals from the checked bounds, I think this is MIR building that introduces raw pointers polluting the analysis;~ solved by a check specific to static variables.
- the diagnostics for captured types don't show where they are used/dropped;
- I do not attempt to support chalk.
cc `@eholk` `@jyn514` for the drop-tracking work
r? `@oli-obk` as you warned me of potential unsoundness
The `asm!` and `global_asm!` macros require their operands to appear
strictly in the following order:
- Template strings
- Positional operands
- Named operands
- Explicit register operands
- `clobber_abi`
- `options`
This is overly strict and can be inconvienent when building complex
`asm!` statements with macros. This PR relaxes the ordering requirements
as follows:
- Template strings must still come before all other operands.
- Positional operands must still come before named and explicit register
operands.
- Named and explicit register operands can be freely mixed.
- `options` and `clobber_abi` can appear in any position.
rustdoc: use smarter encoding for playground URL
The old way would compress okay with DEFLATE, but this version makes uncompressed docs smaller, which matters for memory usage and stuff like `cargo doc`.
Try it out: <https://play.rust-lang.org/?code=fn+main()+{%0Alet+mut+v+=+Vec::new();%0Av.push(1+/+1);%0Aprintln!(%22{}%22,+v[0]);%0A}>
In local testing, this change shrinks sample pages by anywhere between 4.0% and 0.031%
$ du -b after.dir/std/vec/struct.Vec.html before.dir/std/vec/struct.Vec.html
759235 after.dir/std/vec/struct.Vec.html
781842 before.dir/std/vec/struct.Vec.html
100*((759235-781842)/781842)=-2.8
$ du -b after.dir/std/num/struct.Wrapping.html before.dir/std/num/struct.Wrapping.html
3194173 after.dir/std/num/struct.Wrapping.html
3204351 before.dir/std/num/struct.Wrapping.html
100*((3194173-3204351)/3204351)=-0.031
$ du -b after.dir/std/keyword.match.html before.dir/std/keyword.match.html
8151 after.dir/std/keyword.match.html
8495 before.dir/std/keyword.match.html
100*((8151-8495)/8495)=-4.0
Gzipped tarball sizes seem shrunk, but not by much.
du -s before.tar.gz after.tar.gz
69600 before.tar.gz
69480 after.tar.gz
100*((69480-69600)/69600)=-0.17
A definition does not dominate a use in the same statement. For example
in MIR generated for compound assignment x += a (when overflow checks
are disabled).
make `output_filenames` a real query
part of #105462
This may be a perf regression and is not obviously the right way forward. We may store this information in the resolver after freezing it for example.
The old way would compress okay with DEFLATE, but this version makes
uncompressed docs smaller, which matters for memory usage and stuff
like `cargo doc`.
Try it out: <https://play.rust-lang.org/?code=fn+main()+{%0Alet+mut+v+=+Vec::new();%0Av.push(1+/+1);%0Aprintln!(%22{}%22,+v[0]);%0A}>
In local testing, this change shrinks sample pages by anywhere between
4.0% and 0.031%
$ du -b after.dir/std/vec/struct.Vec.html before.dir/std/vec/struct.Vec.html
759235 after.dir/std/vec/struct.Vec.html
781842 before.dir/std/vec/struct.Vec.html
100*((759235-781842)/781842)=-2.8
$ du -b after.dir/std/num/struct.Wrapping.html before.dir/std/num/struct.Wrapping.html
3194173 after.dir/std/num/struct.Wrapping.html
3204351 before.dir/std/num/struct.Wrapping.html
100*((3194173-3204351)/3204351)=-0.031
$ du -b after.dir/std/keyword.match.html before.dir/std/keyword.match.html
8151 after.dir/std/keyword.match.html
8495 before.dir/std/keyword.match.html
100*((8151-8495)/8495)=-4.0
Gzipped tarball sizes seem shrunk, but not by much.
du -s before.tar.gz after.tar.gz
69600 before.tar.gz
69480 after.tar.gz
100*((69480-69600)/69600)=-0.17
Rollup of 8 pull requests
Successful merges:
- #106904 (Preserve split DWARF files when building archives.)
- #106971 (Handle diagnostics customization on the fluent side (for one specific diagnostic))
- #106978 (Migrate mir_build's borrow conflicts)
- #107150 (`ty::tls` cleanups)
- #107168 (Use a type-alias-impl-trait in `ObligationForest`)
- #107189 (Encode info for Adt in a single place.)
- #107322 (Custom mir: Add support for some remaining, easy to support constructs)
- #107323 (Disable ConstGoto opt in cleanup blocks)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Custom mir: Add support for some remaining, easy to support constructs
Some documentation for previous changes and support for `Deinit`, checked binops, len, and array repetition
r? ```@oli-obk``` or ```@tmiasko```
Migrate mir_build's borrow conflicts
This also changes the error message slightly, for two reasons:
- I'm not a fan of saying "value borrowed, by `x`, here"
- it simplifies the error implementation significantly.
Move format_args!() into AST (and expand it during AST lowering)
Implements https://github.com/rust-lang/compiler-team/issues/541
This moves FormatArgs from rustc_builtin_macros to rustc_ast_lowering. For now, the end result is the same. But this allows for future changes to do smarter things with format_args!(). It also allows Clippy to directly access the ast::FormatArgs, making things a lot easier.
This change turns the format args types into lang items. The builtin macro used to refer to them by their path. After this change, the path is no longer relevant, making it easier to make changes in `core`.
This updates clippy to use the new language items, but this doesn't yet make clippy use the ast::FormatArgs structure that's now available. That should be done after this is merged.
Use `can_eq` to compare types for default assoc type error
This correctly handles inference variables like `{integer}`. I had to move all of this `note_and_explain` code to `rustc_infer`, it made no sense for it to be in `rustc_middle` anyways.
The commits are reviewed separately.
Fixes#106968
impl DispatchFromDyn for Cell and UnsafeCell
After some fruitful discussion on [Internals](https://internals.rust-lang.org/t/impl-dispatchfromdyn-for-cell-2/16520) here's my first PR to rust-lang/rust 🎉
Please let me know if there's something I missed.
This adds `DispatchFromDyn` impls for `Cell`, `UnsafeCell` and `SyncUnsafeCell`.
An existing test is also expanded to test the `Cell` impl (which requires the `UnsafeCell` impl)
The different `RefCell` types can not implement `DispatchFromDyn` since they have more than one (non ZST) field.
**Edit:**
### What:
These changes allow one to make types like `MyRc`(code below), to be object safe method receivers after implementing `DispatchFromDyn` and `Deref` for them.
This allows for code like this:
```rust
struct MyRc<T: ?Sized>(Cell<NonNull<RcBox<T>>>);
/* impls for DispatchFromDyn, CoerceUnsized and Deref for MyRc*/
trait Trait {
fn foo(self: MyRc<Self>);
}
let impls_trait = ...;
let rc = MyRc::new(impls_trait) as MyRc<dyn Trait>;
rc.foo();
```
Note: `Cell` and `UnsafeCell` won't directly become valid method receivers since they don't implement `Deref`. Making use of these changes requires a wrapper type and nightly features.
### Why:
A custom pointer type with interior mutability allows one to store extra information in the pointer itself.
These changes allow for such a type to be a method receiver.
### Examples:
My use case is a cycle aware custom `Rc` implementation that when dropping a cycle marks some references dangling.
On the [forum](https://internals.rust-lang.org/t/impl-dispatchfromdyn-for-cell/14762/8) andersk mentioned that they track if a `Gc` reference is rooted with an extra bit in the reference itself.
Rollup of 11 pull requests
Successful merges:
- #106407 (Improve proc macro attribute diagnostics)
- #106960 (Teach parser to understand fake anonymous enum syntax)
- #107085 (Custom MIR: Support binary and unary operations)
- #107086 (Print PID holding bootstrap build lock on Linux)
- #107175 (Fix escaping inference var ICE in `point_at_expr_source_of_inferred_type`)
- #107204 (suggest qualifying bare associated constants)
- #107248 (abi: add AddressSpace field to Primitive::Pointer )
- #107272 (Implement ObjectSafe and WF in the new solver)
- #107285 (Implement `Generator` and `Future` in the new solver)
- #107286 (ICE in new solver if we see an inference variable)
- #107313 (Add Style Team Triagebot config)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
abi: add AddressSpace field to Primitive::Pointer
...and remove it from `PointeeInfo`, which isn't meant for this.
There are still various places (marked with FIXMEs) that assume all pointers
have the same size and alignment. Fixing this requires parsing non-default
address spaces in the data layout string (and various other changes),
which will be done in a followup.
(That is, if it's actually worth it to support multiple different pointer sizes.
There is a lot of code that would be affected by that.)
Fixes#106367
r? ``@oli-obk``
cc ``@Patryk27``
Fix escaping inference var ICE in `point_at_expr_source_of_inferred_type`
Fixes#107158
`point_at_expr_source_of_inferred_type` uses `lookup_probe` to adjust the self type of a method receiver -- but that method returns inference variables from inside a probe. That means that the ty vars are no longer valid, so we can't use any infcx methods on them.
Also, pass some extra span info to hack a quick solution to bad labels, resulting in this diagnostic improvement:
```rust
fn example2() {
let mut x = vec![1];
x.push("");
}
```
```diff
error[E0308]: mismatched types
--> src/main.rs:5:12
|
5 | x.push("");
| ---- ^^
| | |
| | expected integer, found `&str`
- | | this is of type `&'static str`, which causes `x` to be inferred as `Vec<{integer}>`
| arguments to this method are incorrect
```
(since that "which causes `x` to be inferred as `Vec<{integer}>` part is wrong)
r? `@estebank`
(we really should make this code better in general, cc #106590, but that's a bit bigger issue that needs some more thinking about)
Custom MIR: Support binary and unary operations
Lower binary and unary operations directly to corresponding unchecked MIR
operations. Ultimately this might not be syntax we want, but it allows for
experimentation in the meantime.
r? ````@oli-obk```` ````@JakobDegen````
Teach parser to understand fake anonymous enum syntax
Parse `Ty | OtherTy` in function argument and return types.
Parse type ascription in top level patterns.
Minimally address #100741.
InstCombine away intrinsic validity assertions
This optimization (currently) fires 246 times on the standard library. It seems to fire hardly at all on the big crates in the benchmark suite. Interesting.
Delete `SimplifyArmIdentity` and `SimplifyBranchSame` mir opts
I had attempted to fix the first of these opts in #94177 . However, despite that PR already being a full re-write, it still did not fix some of the core soundness issues. The optimizations that are attempted here are likely to be desirable, but I do not expect any of the currently written code to survive into a sound implementation. Deleting the code keeps us from having to maintain the passes in the meantime.
Closes#77359 , closes#72800 , closes#78628
r? ```@cjgillot```
rustdoc: rearrange HTML in primitive reference links
This patch avoids hard-to-click single character links by making the generic part of the link:
Before: <a href="#">&</a>T
After: <a href="#">&T</a>
Suggest using a lock for `*Cell: Sync` bounds
I mostly did this for `OnceCell<T>` at first because users will be confused to see that the `OnceCell<T>` in `std` isn't `Sync` but then extended it to `Cell<T>` and `RefCell<T>` as well.
Add hint for missing lifetime bound on trait object when type alias is used
Fix issue #103582.
The problem: When a type alias is used to specify the return type of the method in a trait impl, the suggestion for fixing the problem of "missing lifetime bound on trait object" of the trait impl will not be created. The issue caused by the code which searches for the return trait objects when constructing the hint suggestion is not able to find the trait objects since they are specified in the type alias path instead of the return path of the trait impl.
The solution: Trace the trait objects in the type alias path and provide them along with the alias span to generate the suggestion in case the type alias is used in return type of the method in the trait impl.
rustdoc: simplify settings popover DOM, CSS, JS
* Change the class names so that they all start with `setting-`. That should make it harder to accidentally use a setting class outside the settings popover, where loading the CSS might accidentally change the styles of something unrelated.
* Get rid of an unnecessary wrapper DIV around the radio button line.
* Simplify CSS selectors by making the DOM easier and more intuitive to target.
* Remove dead settings JS for obsolete select-wrapper
Add suggestion to remove if in let..else block
Adds an additional hint to failures where we encounter an else keyword while we're parsing an if-let expression.
This is likely that the user has accidentally mixed if-let and let..else together.
Fixes#103791.
- On compiler-error's suggestion of moving this lower down the stack,
along the path of `report_mismatched_types()`, which is used
by `rustc_hir_analysis` and `rustc_hir_typeck`.
- update ui tests, add test
- add suggestions for references to fn pointers
- modify `TypeErrCtxt::same_type_modulo_infer` to take `T: relate::Relate` instead of `Ty`
Adds an additional hint to failures where we encounter an else keyword
while we're parsing an if-let block.
This is likely that the user has accidentally mixed if-let and let...else
together.
* Changes the class names so that they all start with `setting-`.
That should make it harder to accidentally use a setting class outside
the settings popover, where loading the CSS might accidentally change
the styles of something unrelated.
* Get rid of an unnecessary wrapper DIV around the radio button line.
* Simplify CSS selectors by making the DOM easier and more intuitive
to target.
remove error code from `E0789`, add UI test/docs
`E0789` shouldn't have an error code, it's explicitly internal-only and is tiny in scope. (I wonder if we can tighten the standard for this in the RFC?) I also added a UI test and error docs (done like `E0208`, they are "no longer emitted").
r? `@GuillaumeGomez` (shouldn't need a compiler review, it's pretty minor)
Consider doc(alias) when providing typo suggestions
This means that
```rust
impl Foo {
#[doc(alias = "quux")]
fn bar(&self) {}
}
fn main() {
(Foo {}).quux();
}
```
will suggest `bar`. This currently uses the "there is a method with a similar name" help text, because the point where we choose and emit a suggestion is different from where we gather the suggestions. Changes have mainly been made to the latter.
The selection code will now fall back to aliased candidates, but generally only if there is no candidate that matches based on the existing Levenshtein methodology.
Fixes#83968.
...and remove it from `PointeeInfo`, which isn't meant for this.
There are still various places (marked with FIXMEs) that assume all pointers
have the same size and alignment. Fixing this requires parsing non-default
address spaces in the data layout string, which will be done in a followup.
This means that
```rust
impl Foo {
#[doc(alias = "quux")]
fn bar(&self) {}
}
fn main() {
(Foo {}).quux();
}
```
will suggest `bar`. This currently uses the "there is a method with a
similar name" help text, because the point where we choose and emit a
suggestion is different from where we gather the suggestions. Changes
have mainly been made to the latter.
The selection code will now fall back to aliased candidates, but
generally only if there is no candidate that matches based on the
existing Levenshtein methodology.
Fixes#83968.
Rollup of 8 pull requests
Successful merges:
- #103418 (Add `SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` to future-incompat report)
- #106113 (llvm-wrapper: adapt for LLVM API change)
- #106144 (Improve the documentation of `black_box`)
- #106578 (Label closure captures/generator locals that make opaque types recursive)
- #106749 (Update cc to 1.0.77)
- #106935 (Fix `SingleUseLifetime` ICE)
- #107015 (Re-enable building rust-analyzer on riscv64)
- #107029 (Add new bootstrap members to triagebot.toml)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Add `SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` to future-incompat report
See https://github.com/rust-lang/rust/issues/79813 for a discussion of this lint. This has been warn-by-default for over a year, so adding it to the future-incompat report should help to find libraries that haven't yet updated.
Revert "Make PROC_MACRO_DERIVE_RESOLUTION_FALLBACK a hard error"
This reverts commit 7d82cadd97 aka PR #84022
I am doing this to buy us some time with respect to issue #106337 w.r.t. the 1.67 release.
Remap paths in UI tests by default
If you think this needs further discussions / something RFC-like, please let me know the best forum for that.
This PR runs UI tests with a remapped "src base" directory by default.
Why? Because some UI tests currently depend on the length of the absolute path to the `src/test/ui` directory. Remapping makes the tests independent of the absolute path.
The path to the source file (which is absolute on CI) is part of the type name of closures. `rustc` diagnostic output depends on the length of type names (long type names are truncated). So a long absolute path leads to long closure type names, which leads to truncation and changed diagnostics.
(I initially tried just disabling type name truncation, but that made some error messages stupid long (thousands of characters, IIRC)).
Additional changes:
* All boolean `compiletest` directives now support explicit `no-` versions to disable them.
* Adapt existing tests when necessary:
* Disable remapping for individual tests that fail with it enabled (when there's no obvious alternative fix).
* For tests that already check something remapping related switch to the new option unless we gain something significant by keeping the manual remap.
Passed Windows CI in https://github.com/rust-lang/rust/actions/runs/3933100590
Implement some more new solver candidates and fix some bugs
First, fix some bugs:
1. `IndexVec::drain_enumerated(a..b)` does not give us an iterator of index keys + items enumerated from `a..b`, but from `0..(b-a)`... That caused a bug. See first commit for the fix.
2. Implement the `_: Trait` ambiguity hack. I put it in assemble, let me know if it should live elsewhere. This is important, since we otherwise consider `_: Sized` to have no solutions, and nothing passes!
3. Swap `Ambiguity` and `Unimplemented` cases for the new solver. Sorry for accidentally swapping them 😄
4. Check GATs' own predicates during projection confirmation.
Then implement a few builtin traits:
5. Implement `PointerSized`. Pretty independent.
6. Implement `Fn` family of traits for fnptr, fndef, and closures. Closures are currently broken because `FulfillCtxt::relationships` is intentionally left unimplemented. See comment in the test.
r? ```@lcnr```
Change `bindings_with_variant_name` to deny-by-default
Changed the `bindings_with_variant_name` lint to deny-by-default and fixed up the affected tests.
Addresses #103442.
[drop tracking] Visit break expressions
This fixes https://github.com/rust-lang/rust/issues/102383 by remembering to visit the expression in `break expr` when building the drop tracking CFG. Missing this step was causing an off-by-one error which meant after a number of awaits we'd be
looking for dropped values at the wrong point in the code.
Additionally, this changes the order of traversal for assignment expressions to visit the rhs and then the lhs. This matches what is done elsewhere.
Finally, this improves some of the debugging output (for example, the CFG visualizer) to make it easier to figure out these sorts of issues.
Added const-generic ui test case for issue #106419
This PR adds a test case for #106419 which has been fixed in master by #105292
I also ran the test on f769d34291 (the commit before #105292 was merged)
and it did fail there with the following output.
```
--- stderr -------------------------------
error[E0308]: mismatched types
--> /home/patrikk/src/rust/src/test/ui/const-generics/issue-106419-struct-with-multiple-const-params.rs:5:10
|
LL | #[derive(Clone)]
| ^^^^^
| |
| expected `A`, found `B`
| expected `Bar<A, B>` because of return type
|
= note: expected struct `Bar<A, _>`
found struct `Bar<B, _>`
= note: this error originates in the derive macro `Clone` (in Nightly builds, run with -Z macro-backtrace for more info)
error: aborting due to previous error
For more information about this error, try `rustc --explain E0308`.
------------------------------------------
```
Recognise double-equals homoglyph
Recognise `⩵` as a homoglyph for `==`.
The first commit switches `char` to `&str`, as all previous homoglyphs corresponded to a single ASCII character, while the second implements the fix.
`@rustbot` label +A-diagnostics +A-parser
Don't treat closures from other crates as local
fixes#104817
r? `@lcnr`
Specialization can prefer an impl for an opaque type over a blanket impls that also matches. If the blanket impl only applies if an auto-trait applies, we look at the hidden type of the opaque type to see if that implements the auto trait. The hidden type can be a closure or generator, and thus we will end up seeing these types in coherence and have to handle them properly.
Don't wf-check non-local RPITs
We were using `ty::is_impl_trait_defn(..).is_none()` to check if we need to add WF obligations for an opaque type.
This is *supposed* to be checking if the type is a TAIT, since RPITs' wfness is implied by wf checking its parent item, but since `is_impl_trait_defn` returns `None` for non-local RPIT and async futures, we unnecessarily consider wf predicates for an RPIT if it is coming from a foreign crate.
Fixes#107036
r? `@oli-obk` but feel free to reassign
even more unify Projection/Opaque handling in region outlives code
edit: This continues ate the same pace as #106829. New changes are described in https://github.com/rust-lang/rust/pull/106910#issuecomment-1383251254.
~This touches `OutlivesBound`, `Component`, `GenericKind` enums.~
r? `@oli-obk` (because of overlap with #95474)
Rollup of 5 pull requests
Successful merges:
- #105977 (Transform async `ResumeTy` in generator transform)
- #106927 (make `CastError::NeedsDeref` create a `MachineApplicable` suggestion)
- #106931 (document + UI test `E0208` and make its output more user-friendly)
- #107027 (Remove extra removal from test path)
- #107037 (Fix Dominators::rank_partial_cmp to match documentation)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
document + UI test `E0208` and make its output more user-friendly
Cleans up `E0208`'s output a lot. It could actually be useful for someone learning about variance now. I also added a UI test for it in `tests/ui/error-codes/` and wrote some docs for it.
r? `@GuillaumeGomez` another error code, can't be bothered to find the issue :P. Obviously there's some compiler stuff, so you'll have to hand it off.
Part of https://github.com/rust-lang/rust/issues/61137.
make `CastError::NeedsDeref` create a `MachineApplicable` suggestion
Fixes#106903
Simple impl for the linked issue. I also made some other small changes:
- `CastError::ErrorGuaranteed` now owns an actual `ErrorGuaranteed`. This better enforces the static guarantees of `ErrorGuaranteed`.
- `CastError::NeedDeref` code simplified a bit, we now just suggest the `*`, instead of the whole expression as well.
Transform async `ResumeTy` in generator transform
- Eliminates all the `get_context` calls that async lowering created.
- Replace all `Local` `ResumeTy` types with `&mut Context<'_>`.
The `Local`s that have their types replaced are:
- The `resume` argument itself.
- The argument to `get_context`.
- The yielded value of a `yield`.
The `ResumeTy` hides a `&mut Context<'_>` behind an unsafe raw pointer, and the `get_context` function is being used to convert that back to a `&mut Context<'_>`.
Ideally the async lowering would not use the `ResumeTy`/`get_context` indirection, but rather directly use `&mut Context<'_>`, however that would currently lead to higher-kinded lifetime errors.
See <https://github.com/rust-lang/rust/issues/105501>.
The async lowering step and the type / lifetime inference / checking are still using the `ResumeTy` indirection for the time being, and that indirection is removed here. After this transform, the generator body only knows about `&mut Context<'_>`.
---
Fixes https://github.com/bjorn3/rustc_codegen_cranelift/issues/1330 CC `@bjorn3`
r? `@compiler-errors`
Implement `alloc::vec::IsZero` for `Option<$NUM>` types
Fixes#106911
Mirrors the `NonZero$NUM` implementations with an additional `assert_zero_valid`.
`None::<i32>` doesn't stricly satisfy `IsZero` but for the purpose of allocating we can produce more efficient codegen.
- Eliminates all the `get_context` calls that async lowering created.
- Replace all `Local` `ResumeTy` types with `&mut Context<'_>`.
The `Local`s that have their types replaced are:
- The `resume` argument itself.
- The argument to `get_context`.
- The yielded value of a `yield`.
The `ResumeTy` hides a `&mut Context<'_>` behind an unsafe raw pointer, and the
`get_context` function is being used to convert that back to a `&mut Context<'_>`.
Ideally the async lowering would not use the `ResumeTy`/`get_context` indirection,
but rather directly use `&mut Context<'_>`, however that would currently
lead to higher-kinded lifetime errors.
See <https://github.com/rust-lang/rust/issues/105501>.
The async lowering step and the type / lifetime inference / checking are
still using the `ResumeTy` indirection for the time being, and that indirection
is removed here. After this transform, the generator body only knows about `&mut Context<'_>`.
Various cleanups around pre-TyCtxt queries and functions
part of #105462
based on https://github.com/rust-lang/rust/pull/106776 (everything starting at [0e2b39f](0e2b39fd1f) is new in this PR)
r? `@petrochenkov`
I think this should be most of the uncontroversial part of #105462.
Rollup of 8 pull requests
Successful merges:
- #105796 (rustdoc: simplify JS search routine by not messing with lev distance)
- #106753 (Make sure that RPITITs are not considered suggestable)
- #106917 (Encode const mir for closures if they're const)
- #107004 (Implement some candidates for the new solver (redux))
- #107023 (Stop using `BREAK` & `CONTINUE` in compiler)
- #107030 (Correct typo)
- #107042 (rustdoc: fix corner cases with "?" JS keyboard command)
- #107045 (rustdoc: remove redundant CSS rule `#settings .setting-line`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
rustdoc: remove redundant CSS rule `#settings .setting-line`
Since the current version of settings.js always nests things below a div with ID `settings`, this rule always overrode the one above.
rustdoc: simplify JS search routine by not messing with lev distance
Since the sorting function accounts for an `index` field, there's not much reason to also be applying changes to the levenshtein distance. Instead, we can just not treat `lev` as a filter if there's already a non-sentinel value for `index`.
<details>
This change gives slightly more weight to the index and path part, as search criteria, than it used to. This changes some of the test cases, but not in any obviously-"worse" way, and, in particular, substring matches are a bigger deal than levenshtein distances (we're assuming that a typo is less likely than someone just not typing the entire name).
The biggest change is the addition of a `path_lev` field to result items. It's always zero if the search query has no parent path part and for type queries, making the check in the `sortResults` function a no-op. When it's present, it is used to implement different precedence for the parent path and the tail.
Consider the query `hashset::insert`, a test case [that already exists and can be found here](5c6a1681a9/src/test/rustdoc-js-std/path-ordering.js). We want the ordering shown in the test case:
```
{ 'path': 'std::collections::hash_set::HashSet', 'name': 'insert' },
{ 'path': 'std::collections::hash_set::HashSet', 'name': 'get_or_insert' },
{ 'path': 'std::collections::hash_set::HashSet', 'name': 'get_or_insert_with' },
{ 'path': 'std::collections::hash_set::HashSet', 'name': 'get_or_insert_owned' },
{ 'path': 'std::collections::hash_map::HashMap', 'name': 'insert' },
```
We do not want this ordering, which is the ordering that would occur if substring position took priority over `path_lev`:
```
{ 'path': 'std::collections::hash_set::HashSet', 'name': 'insert' },
{ 'path': 'std::collections::hash_map::HashMap', 'name': 'insert' }, // BAD
{ 'path': 'std::collections::hash_set::HashSet', 'name': 'get_or_insert' },
{ 'path': 'std::collections::hash_set::HashSet', 'name': 'get_or_insert_with' },
{ 'path': 'std::collections::hash_set::HashSet', 'name': 'get_or_insert_owned' },
```
We also do not want `HashSet::iter` to appear before `HashMap::insert`, which is what would happen if `path_lev` took priority over the appearance of any substring match. This is why the `sortResults` function has `path_lev` sandwiched between a `index < 0` check and a `index` comparison check:
```
{ 'path': 'std::collections::hash_set::HashSet', 'name': 'insert' },
{ 'path': 'std::collections::hash_set::HashSet', 'name': 'get_or_insert' },
{ 'path': 'std::collections::hash_set::HashSet', 'name': 'get_or_insert_with' },
{ 'path': 'std::collections::hash_set::HashSet', 'name': 'get_or_insert_owned' },
{ 'path': 'std::collections::hash_set::HashSet', 'name': 'iter' }, // BAD
{ 'path': 'std::collections::hash_map::HashMap', 'name': 'insert' },
```
The old code implemented a similar feature by manipulating the `lev` member based on whether a substring match was found and averaging in the path distance (`item.lev = name_lev + path_lev / 10`), so the path lev wound up acting like a tie breaker, but it gives slightly different results for `Vec::new`, [changing the test case](https://github.com/rust-lang/rust/pull/105796/files#diff-b346e2ef72a407915f438063c8c2c04f7a621df98923d441b41c0312211a5b21) because of the slight changes to ordering priority.
</details>
Based on https://github.com/rust-lang/rust/pull/103710#issuecomment-1296894296
Previews:
* https://notriddle.com/notriddle-rustdoc-demos/rustdoc-search-stop-doing-demerits/std/index.html
* https://notriddle.com/notriddle-rustdoc-demos/rustdoc-search-stop-doing-demerits-compiler/index.html
Revert "Improve heuristics whether `format_args` string is a source literal"
This reverts commit e6c02aad93 (from #106195).
Keeps the code improvements from the PR and the test (as a known-bug).
Works around #106408 while a proper fix is discussed more thoroughly in #106505, as proposed by `@tmandry.`
Reopens#106191
r? compiler-errors
This prevents some strange blur-event-related bugs with the "?" command
by ensuring that the focus remains in the same spot when the settings
area closes.
Do not filter substs in `remap_generic_params_to_declaration_params`.
The relevant filtering should have been performed by borrowck.
Fixes https://github.com/rust-lang/rust/issues/105826
r? types
dont randomly use `_` to print out const generic arguments
const generics seem to get printed out as `_` for no reason a lot of the time, as someone who spends a lot of time with const generics this has gotten ✨ very annoying ✨. Latest example would be #106423 where the ICE messaged formatted a `ty::Const` containing no infer vars, as `_`.
For some reason printing of the const argument on arrays was custom instead of using the existing logic for printing `ty::Const`. Additionally the existing logic for printing `ty::Const` would print out `_` for anon consts that are in a separate crate leading to weird diagnostics (see second commit). There ought to be less cases of consts randomly getting printed as `_` hiding valuable info now.
Add 'static lifetime suggestion when GAT implied 'static requirement from HRTB
Fix for issue #105507
The problem:
When generic associated types (GATs) are from higher-ranked trait bounds (HRTB), they are implied 'static requirement (see
[Implied 'static requirement from higher-ranked trait bounds](https://blog.rust-lang.org/2022/10/28/gats-stabilization.html#implied-static-requirement-from-higher-ranked-trait-bounds) for more details). If the user did not explicitly specify the `'static` lifetime when using the GAT, the current error message will only point out the type `does not live long enough` where the type is used, but not where the GAT is specified and how to fix the problem.
The solution:
Add notes at the span where the problematic GATs are specified and suggestions of how to fix the problem by adding `'static` lifetime at the right spans.
Rollup of 7 pull requests
Successful merges:
- #104505 (Remove double spaces after dots in comments)
- #106784 (prevent E0512 from emitting [type error] by checking the references_error)
- #106834 (new trait solver: only consider goal changed if response is not identity)
- #106889 (Mention the lack of `windows_mut` in `windows`)
- #106963 (Use `scope_expr_id` from `ProbeCtxt`)
- #106970 (Switch to `EarlyBinder` for `item_bounds` query)
- #106980 (Hide `_use_mk_alias_ty_instead` in `<AliasTy as Debug>::fmt`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Put `noundef` on all scalars that don't allow uninit
Previously, it was only put on scalars with range validity invariants like bool, was uninit was obviously invalid for those.
Since then, we have normatively declared all uninit primitives to be undefined behavior and can therefore put `noundef` on them.
The remaining concern was the `mem::uninitialized` function, which cause quite a lot of UB in the older parts of the ecosystem. After #99182, this function now doesn't return uninit values anymore, making users of it safe from this change.
The only real sources of UB where people could encounter uninit primitives are `MaybeUninit::uninit().assume_init()`, which has always be clear in the docs about being UB and from heap allocations (like reading from the spare capacity of a vec). This is hopefully rare enough to not break anything.
cc `@nagisa` `@scottmcm` `@nikic`
Constify `TypeId` ordering impls
Tracking issue: #101871
Adding const ordering to `TypeId` allows rtti crates to optimize some casting scenarios (without transmuting to `u64`). This would also prevent these crates from breaking if the underlying type is changed from `u64` to something different.
Feature gate: `#![feature(const_cmp_type_id)]`
fix: don't emit `E0711` if `staged_api` not enabled
Fixes#106589
Simple fix, added UI test.
As an aside, it seems a lot of features are susceptible to this, `E0711` stands out to me because it's perma-unstable and we are effectively exposing an implementation detail.
Previously, it was only put on scalars with range validity invariants
like bool, was uninit was obviously invalid for those.
Since then, we have normatively declared all uninit primitives to be
undefined behavior and can therefore put `noundef` on them.
The remaining concern was the `mem::uninitialized` function, which cause
quite a lot of UB in the older parts of the ecosystem. This function now
doesn't return uninit values anymore, making users of it safe from this
change.
The only real sources of UB where people could encounter uninit
primitives are `MaybeUninit::uninit().assume_init()`, which has always
be clear in the docs about being UB and from heap allocations (like
reading from the spare capacity of a vec. This is hopefully rare enough
to not break anything.
rustdoc: remove redundant item kind class from `.item-decl > pre`
This class originated in the very first commit of `rustdoc_ng`, and was used to add a color border around the item decl based on its kind.
4fd061c426/src/rustdoc_ng/html/static/main.css (L102-L106)
The item decl no longer has a border, and there aren't any kind-specific styles in modern rustdoc's rendering of this UI item.
Most of this PR is updating test cases so that they use `item-decl` to find the `<pre>` tag instead of relying on the fact that the class name had `rust {kind}` in it while other `<pre>` tags only had class `rust`.
make error emitted on `impl &Trait` nicer
Fixes#106694
Turned out to be simpler than I thought, also added UI test.
Before: ([playground](https://play.rust-lang.org/?version=stable&mode=debug&edition=2021&gist=9bda53271ef3a8886793cf427b8cea91))
```text
error: expected one of `:`, ``@`,` or `|`, found `)`
--> src/main.rs:2:22
|
2 | fn foo(_: impl &Trait) {}
| ^ expected one of `:`, ``@`,` or `|`
|
= note: anonymous parameters are removed in the 2018 edition (see RFC 1685)
help: if this is a parameter name, give it a type
|
2 | fn foo(_: impl Trait: &TypeName) {}
| ~~~~~~~~~~~~~~~~
help: if this is a type, explicitly ignore the parameter name
|
2 | fn foo(_: impl _: &Trait) {}
| ++
error: expected one of `!`, `(`, `)`, `,`, `?`, `for`, `~`, lifetime, or path, found `&`
--> src/main.rs:2:16
|
2 | fn foo(_: impl &Trait) {}
| -^ expected one of 9 possible tokens
| |
| help: missing `,`
error: expected one of `!`, `(`, `,`, `=`, `>`, `?`, `for`, `~`, lifetime, or path, found `&`
--> src/main.rs:3:11
|
3 | fn bar<T: &Trait>(_: T) {}
| ^ expected one of 10 possible tokens
```
After:
```text
error: expected a trait, found type
--> <anon>:2:16
|
2 | fn foo(_: impl &Trait) {}
| -^^^^^
| |
| help: consider removing the indirection
error: expected a trait, found type
--> <anon>:3:11
|
3 | fn bar<T: &Trait>(_: T) {}
| -^^^^^
| |
| help: consider removing the indirection
```
suggestion for attempted integer identifier in patterns
Fixes#106552
Implemented a suggestion on `E0005` that occurs when no bindings are present and the pattern is a literal integer.
Heuristically undo path prefix mappings.
Because the compiler produces better diagnostics if it can find the source of (potentially remapped) dependencies.
The new test fails without the other changes in this PR. Let me know if you have better suggestions for the test directory. I moved the existing remapping test to be in the same location as the new one.
Some more context: I'm exploring running UI tests with remapped paths by default in https://github.com/rust-lang/rust/pull/105924 and this was one of the issues discovered.
This may also be useful in the context of https://github.com/rust-lang/rfcs/pull/3127 ("New rustc and Cargo options to allow path sanitisation by default").
Emit only one nbsp error per file
Fixes#106101.
See https://github.com/rust-lang/rust/issues/106098 for an explanation of how someone would end up with a large number of these nbsp characters in their source code, which is why I think rustc needs to handle this specific case in a friendlier way.
Rollup of 5 pull requests
Successful merges:
- #106888 (Add tidy check to ensure that rustdoc GUI tests start with a small description)
- #106896 (suggest `is_empty` for collections when casting to `bool`)
- #106900 (Fix regression in `unused_braces` with macros)
- #106906 (remove redundant clones)
- #106909 (Only suggest adding type param if path being resolved was a type)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
suggest `is_empty` for collections when casting to `bool`
Fixes#106883
Matches on slices, `String` and `str`. It would be nice to do this with something like `Deref<Target=str>` as well, but AFAIK it's not possible in this part of the compiler.
Add tidy check to ensure that rustdoc GUI tests start with a small description
The first commit comes from https://github.com/rust-lang/rust/pull/106865 to prevent CI to fail.
This PR adds a tidy check to enforce having a small description at the top of the GUI test. Although the format is made to be as easy as possible to read, it's not always obvious what a test is actually checking. I think enforcing this will make it easier for us to come back on these tests if needed.
r? `@notriddle`
Simplify manual ptr arithmetic in slice::Iter with ptr_sub
The old code was introduced in #61885, which predates the ptr_sub method and underlying intrinsic. The codegen test still passes.
r? `@scottmcm`
The optimization that removes artifacts when building libraries is correct
from the compiler's perspective but not from a debugger's perspective.
Unpacked split debuginfo is referred to by filename and debuggers need
the artifact that contains debuginfo to continue to exist at that path.
Ironically the test expects the correct behavior but it was not running.
Consolidate two almost duplicated fn info extraction routines
Moves `extract_callable_info` up to trait selection, because it was being (almost) duplicated fully there for similar diagnostic purposes. This also generalizes the diagnostics we can give slightly (see UI test).
Suggestion for type mismatch when we need a u8 but the programmer wrote a char literal
Today Rust just points out that we have a char and we need a u8, but if I wrote 'A' then I could fix this by just writing b'A' instead. This code should detect the case where we're about to report a type mismatch of this kind, and the programmer wrote a char literal, and the char they wrote is ASCII, so therefore just prefixing b to make a byte literal will do what they meant.
I have definitely written this mistake more than once, it's not difficult to figure out what to do, but the compiler might as well tell us anyway.
I provided a test with two simple examples where the suggestion is appropriate, and one where it is not because the char literal is not ASCII, showing that the suggestion is only triggered in the former cases.
I have contributed only a small typo doc fix before, so this is my first substantive rustc change.
This class originated in the very first commit of `rustdoc_ng`, and was used
to add a color border around the item decl based on its kind.
4fd061c426/src/rustdoc_ng/html/static/main.css (L102-L106)
The item decl no longer has a border, and there aren't any
kind-specific styles in modern rustdoc's rendering of this UI item.
Most of this commit is updating test cases so that they use `item-decl` to
find the `<pre>` tag instead of relying on the fact that the class name
had `rust {kind}` in it while other `<pre>` tags only had class `rust`.
rustdoc: remove `docblock` class from notable trait popover
This commit builds on b72de9be74, which removes the `docblock` class from the All Items page, and 9457380ac9, which removes the `docblock` class from the item decl.
Fixes#92974
Emit a hint for bad call return types due to generic arguments
When the return type of a function call depends on the type of an argument, e.g.
```
fn foo<T>(x: T) -> T {
x
}
```
and the expected type is set due to either an explicitly typed binding, or because the call to the function is in a tail position without semicolon, the current error implies that the argument in the call has the wrong type.
This new hint highlights that the expected type doesn't match the returned type, which matches the argument type, and that that's why we're flagging the argument type.
Fixes#43608.
Add note when `FnPtr` vs. `FnDef` impl trait
I encountered an instance where an `FnPtr` implemented a trait, but I was passing an `FnDef`. I was confused for an hour and to examine the source code of the trait's crate's tests in order to understand how to cast it properly (it didn't help that it was behind a reference). To the end user, it might not be immediately obvious that they are different and how to convert from an `FnDef` to an `FnPtr`, but it is necessary to cast to the generic function in order to compile. It is thus useful to suggest `as` in the help note, (even if the `Fn` output implements the trait).
Emit a single error for contiguous sequences of unknown tokens
Closes#106101
On encountering a sequence of identical source characters which are unknown tokens, note the amount of subsequent characters and advance past them silently. The old behavior was to emit an error and 'help' note for every single one.
`@rustbot` label +A-diagnostics +A-parser
Fix mir-opt tests for big-endian platforms
The test cases src/test/mir-opt/building/custom/consts.rs and src/test/mir-opt/const_prop/mutable_variable_no_prop.rs are currently failing on big-endian platforms as the binary encoding of some constants is hard-coded in the MIR test files. Fix this by choosing constant values that have the same encoding on big- and little-endian platforms.
The test case src/test/mir-opt/issues/issue_75439.rs is failing as well, but since the purpose of the test is to validate handling of big-endian integer encodings on a little-endian platform, it does not make much sense to run it on big-endian platforms in the first place - we can just ignore it there.
Fixed part of https://github.com/rust-lang/rust/issues/105383.
I encountered an instance where an `FnPtr` implemented a trait, but I was passing an `FnDef`. To
the end user, there is really no way to differentiate each of them, but it is necessary to cast
to the generic function in order to compile. It is thus useful to suggest `as` in the help note,
(even if the Fn output implements the trait).
rustdoc: remove unnecessary DOM class `h1.fqn`
It's misleading. The main heading sometimes isn't an fully qualified name at all.
It's also redundant. It's always a child of `div.main-heading`, so just use that.
Update `rental` hack to work with remapped paths.
This PR simply switches to an already-existing helper instead of hard-coding a specific enum variant. The new revision of the test fails without the other changes in this PR.
Context: I'm exploring running UI tests with remapped paths by default in #105924 and the rental test was one of the ones that failed.
This may also be useful in the context of https://github.com/rust-lang/rfcs/pull/3127 ("New rustc and Cargo options to allow path sanitisation by default").
rustdoc: rename CSS rustdoc-toggle -> toggle and toggle -> settings-toggle
This swaps things around so that the class that gets used more often has the shorter name.
This commit builds on b72de9be74, which removes
the `docblock` class from the All Items page, and
9457380ac9, which removes the `docblock` class
from the item decl.
Fixes#92974
Normalize test output more thoroughly
This prevents differences in local environments, which may (for example) end up with a longer backtrace with more digits in the backtrace prefix, as happened to me. While we're at it, clean more of the output up, including the exact location of the error in the compiler.
cc https://github.com/rust-lang/rust/pull/106521 which introduced this test
Warn when using panic-strategy abort for proc-macro crates
See https://github.com/rust-lang/rust/issues/82320, this simply warns for now as that seems like the best step that can be immediately taken (opposed to straight up rejecting or ignoring)
Bump `IMPLIED_BOUNDS_ENTAILMENT` to Deny + ReportNow
https://github.com/rust-lang/rust/pull/105575#issuecomment-1357201969
> and then later in the same cycle increase the lint to `deny` and change it to `FutureCompatReportNow` in this nightly cycle.
r? ```@lcnr``` when they're back from holiday 😄
Add log-backtrace option to show backtraces along with logging
according to #90698, I added a compiler option, `-Zlog-backtrace=filter`, where `filter` is a module name, to show backtraces for logging without rebuilding.
resolve#90698
It's misleading. The main heading sometimes isn't an fully qualified name at all.
It's also redundant. It's always a child of `div.main-heading`, so just use that.
Render missing generics suggestion verbosely
It's a bit easier to read like this, especially ones that are appending new generics onto an existing list, like ": `, T`" which render somewhat poorly inline.
Also don't suggest `dyn` as a type parameter to add, even if technically that's valid in edition 2015.
When the return type of a function call depends on the type of an
argument, e.g.
```
fn foo<T>(x: T) -> T {
x
}
```
and the expected type is set due to either an explicitly typed
binding, or because the call to the function is in a tail position
without semicolon, the current error implies that the argument in the
call has the wrong type.
This new hint highlights that the expected type doesn't match the
returned type, which matches the argument type, and that that's why
we're flagging the argument type.
Fixes#43608.
This prevents differences in local environments, which may (for example)
end up with a longer backtrace with more digits in the backtrace prefix,
as happened to me. While we're at it, clean more of the output up,
including the exact location of the error in the compiler.
Revert "Make nested RPITIT inherit the parent opaque's generics."
This reverts commit e2d41f4c97, and adjusts the `tests/ui/async-await/in-trait/nested-rpit.rs` test.
r? `@cjgillot`
fixes#106332, manually verified because it had no minimization :/
reopens#105197
cc #106729
Fix reexport of `doc(hidden)` item
Part of #59368.
It doesn't fix the `doc(inline)` nor the `doc(hidden)` on macro. I'll do it in a follow-up PR.
r? `@notriddle`
Mark ZST as FFI-safe if all its fields are PhantomData
This presents one possible solution to issue: #106629.
This is my first (tentative) contribution to the compiler itself.
I'm looking forward for comments and feedback
Closes: #106629
The test cases src/test/mir-opt/building/custom/consts.rs and
src/test/mir-opt/const_prop/mutable_variable_no_prop.rs are
currently failing on big-endian platforms as the binary encoding
of some constants is hard-coded in the MIR test files. Fix this
by choosing constant values that have the same encoding on big-
and little-endian platforms.
The test case src/test/mir-opt/issues/issue_75439.rs is failing
as well, but since the purpose of the test is to validate handling
of big-endian integer encodings on a little-endian platform, it does
not make much sense to run it on big-endian platforms in the first
place - we can just ignore it there.
Fixed part of https://github.com/rust-lang/rust/issues/105383.
Handle inference variables in `CollectAllMismatches` correctly
1. Fix#106240
2. Treat int/float type variables correctly (see `src/test/ui/iterators/invalid-iterator-chain-with-int-infer.rs`), so we can point out things like "`Iterator::Item` changed to `{integer}` here"
Harden the pre-tyctxt query system against accidental recomputation
While the current compiler has no issues where we `take` and then compute the query again, in https://github.com/rust-lang/rust/pull/105462 I accidentally introduced such a case.
I also took the opportunity to remove `peek_mut`, which is only ever used for `global_tcx` to then invoke `enter`. I added an `enter` method directly on the query.
Migrate mir_build diagnostics 2 of 3
The first three commits are fairly boring, however I've made some changes to the output of the match checking diagnostics.
Stabilize `::{core,std}::pin::pin!`
As discussed [over here](https://github.com/rust-lang/rust/issues/93178#issuecomment-1295843548), it looks like a decent time to stabilize the `pin!` macro.
### Public API
```rust
// in module `core::pin`
/// API: `fn pin<T>($value: T) -> Pin<&'local mut T>`
pub macro pin($value:expr $(,)?) {
…
}
```
- Tracking issue: #93178
(now all this needs is an FCP by the proper team?)
Allow codegen to unsize `dyn*` to `dyn`
`dyn* Trait` is just another type that implements `Trait`, so we should be able to unsize `&dyn* Trait` into `&dyn Trait` perfectly fine, same for `Box` and other unsizeable types.
Fixes#106488
Prefer non-`[type error]` candidates during selection
Fixes#102130Fixes#106351
r? types
note: Alternatively we could filter out error where-clauses during param-env construction? But we still need to filter out impls with errors during `match_impl`, I think.
Fix invalid syntax and incomplete suggestion in impl Trait parameter type suggestions for E0311
Fixes#105544
The problems: The suggestion given for E0311 has invalid syntax when the synthetic type parameter is used for Trait type in function declaration:
```rust
fn foo(d: impl Sized) -> impl Sized
```
instead of explicitly specified like the following:
```rust
fn foo<T: Sized>(d: T) -> impl Sized
```
In addition to the syntax error, the suggestions given for E0311 are not complete when multiple elided lifetimes are involved in lifetime bounds, not all involved parameters are given the named lifetime in the suggestions. For the following test case:
```
fn foo(d: impl Sized, p: &mut ()) -> impl Sized + '_ {
(d, p)
}
```
a good suggestion should add the lifetime 'a to both d and p, instead of d only:
```
fn foo<'a>(d: impl Sized + 'a, p: &'a mut ()) -> impl Sized + '_ {
(d, p)
}
```
The Solution: Fix the syntax problem in the suggestions when synthetic type parameter is used, and also add lifetimes for all involved parameters.
Recover from where clauses placed before tuple struct bodies
Open to any suggestions regarding the phrasing of the diagnostic.
Fixes#100790.
`@rustbot` label A-diagnostics
r? diagnostics
Note predicate span on `ImplDerivedObligation`
Seems obvious to point out the where-clause that introduces the `ImplDerivedObligation` :)
r? `@estebank`
