various clippy fixes
We need to keep the order of the given clippy lint rules before passing them.
Since clap doesn't offer any useful interface for this purpose out of the box,
we have to handle it manually.
Additionally, this PR makes `-D` rules work as expected. Previously, lint rules were limited to `-W`. By enabling `-D`, clippy began to complain numerous lines in the tree, all of which have been resolved in this PR as well.
Fixes#121481
cc `@matthiaskrgr`
Update the minimum external LLVM to 17
With this change, we'll have stable support for LLVM 17 and 18.
For reference, the previous increase to LLVM 16 was #117947.
LLVM's default bad-alloc handler may throw if exceptions are enabled,
and `operator new` isn't hooked at all by default. Now we register our
own handler that prints a message similar to fatal errors, then aborts.
We also call the function that registers the C++ `std::new_handler`.
coverage: Initial support for branch coverage instrumentation
(This is a review-ready version of the changes that were drafted in #118305.)
This PR adds support for branch coverage instrumentation, gated behind the unstable flag value `-Zcoverage-options=branch`. (Coverage instrumentation must also be enabled with `-Cinstrument-coverage`.)
During THIR-to-MIR lowering (MIR building), if branch coverage is enabled, we collect additional information about branch conditions and their corresponding then/else blocks. We inject special marker statements into those blocks, so that the `InstrumentCoverage` MIR pass can reliably identify them even after the initially-built MIR has been simplified and renumbered.
The rest of the changes are mostly just plumbing needed to gather up the information that was collected during MIR building, and include it in the coverage metadata that we embed in the final binary.
Note that `llvm-cov show` doesn't print branch coverage information in its source views by default; that needs to be explicitly enabled with `--show-branches=count` or similar.
---
The current implementation doesn't have any support for instrumenting `if let` or let-chains. I think it's still useful without that, and adding it would be non-trivial, so I'm happy to leave that for future work.
coverage: Remove or migrate all unstable values of `-Cinstrument-coverage`
(This PR was substantially overhauled from its original version, which migrated all of the existing unstable values intact.)
This PR takes the three nightly-only values that are currently accepted by `-Cinstrument-coverage`, completely removes two of them (`except-unused-functions` and `except-unused-generics`), and migrates the third (`branch`) over to a newly-introduced unstable flag `-Zcoverage-options`.
I have a few motivations for wanting to do this:
- It's unclear whether anyone actually uses the `except-unused-*` values, so this serves as an opportunity to either remove them, or prompt existing users to object to their removal.
- After #117199, the stable values of `-Cinstrument-coverage` treat it as a boolean-valued flag, so having nightly-only extra values feels out-of-place.
- Nightly-only values also require extra ad-hoc code to make sure they aren't accidentally exposed to stable users.
- The new system allows multiple different settings to be toggled independently, which isn't possible in the current single-value system.
- The new system makes it easier to introduce new behaviour behind an unstable toggle, and then gather nightly-user feedback before possibly making it the default behaviour for all users.
- The new system also gives us a convenient place to put relatively-narrow options that won't ever be the default, but that nightly users might still want access to.
- It's likely that we will eventually want to give stable users more fine-grained control over coverage instrumentation. The new flag serves as a prototype of what that stable UI might eventually look like.
The `branch` option is a placeholder that currently does nothing. It will be used by #122322 to opt into branch coverage instrumentation.
---
I see `-Zcoverage-options` as something that will exist more-or-less indefinitely, though individual sub-options might come and go as appropriate. I think there will always be some demand for nightly-only toggles, so I don't see `-Zcoverage-options` itself ever being stable, though we might eventually stabilize something similar to it.
Only generate a ptrtoint in AtomicPtr codegen when absolutely necessary
This special case was added in this PR: https://github.com/rust-lang/rust/pull/77611 in response to this error message:
```
Intrinsic has incorrect argument type!
void ({}*)* `@llvm.ppc.cfence.p0sl_s`
in function rust_oom
LLVM ERROR: Broken function found, compilation aborted!
[RUSTC-TIMING] std test:false 20.161
error: could not compile `std`
```
But when I tried searching for more information about that intrinsic I found this: https://github.com/llvm/llvm-project/issues/55983 which is a report of someone hitting this same error and a fix was landed in LLVM, 2 years after the above Rust PR.
Ensure nested allocations in statics neither get deduplicated nor duplicated
This PR generates new `DefId`s for nested allocations in static items and feeds all the right queries to make the compiler believe these are regular `static` items. I chose this design, because all other designs are fragile and make the compiler horribly complex for such a niche use case.
At present this wrecks incremental compilation performance *in case nested allocations exist* (because any query creating a `DefId` will be recomputed and never loaded from the cache). This will be resolved later in https://github.com/rust-lang/rust/pull/115613 . All other statics are unaffected by this change and will not have performance regressions (heh, famous last words)
This PR contains various smaller refactorings that can be pulled out into separate PRs. It is best reviewed commit-by-commit. The last commit is where the actual magic happens.
r? `@RalfJung` on the const interner and engine changes
fixes https://github.com/rust-lang/rust/issues/79738
Fix 32-bit overflows in LLVM composite constants
Inspired by #121868. Fixes unsoundness created when constructing constant arrays, strings, and structs with 2^32 or more elements on x86_64. This introduces copies of a few LLVM functions that have their signatures updated to use size_t in place of unsigned int. Alternatively we could just add overflow checks and just disallow huge composite constants. That introduces less code, but maybe a huge static block of memory is useful in embedded/no-os situations?
Remove the unused `field_remapping` field from `TypeLowering`
The `field_remapping` field of `TypeLowering` has been unused since #121665. This PR removes it, then replaces the `TypeLowering` struct with its only remaining member `&'ll Type`.
std support for wasm32 panic=unwind
Tracking issue: #118168
This adds std support for `-Cpanic=unwind` on wasm, and with it slightly more fleshed out rustc support. Now, the stable default is still panic=abort without exception-handling, but if you `-Zbuild-std` with `RUSTFLAGS=-Cpanic=unwind`, you get wasm exception-handling try/catch blocks in the binary:
```rust
#[no_mangle]
pub fn foo_bar(x: bool) -> *mut u8 {
let s = Box::<str>::from("hello");
maybe_panic(x);
Box::into_raw(s).cast()
}
#[inline(never)]
#[no_mangle]
fn maybe_panic(x: bool) {
if x {
panic!("AAAAA");
}
}
```
```wat
;; snip...
(try $label$5
(do
(call $maybe_panic
(local.get $0)
)
(br $label$1)
)
(catch_all
(global.set $__stack_pointer
(local.get $1)
)
(call $__rust_dealloc
(local.get $2)
(i32.const 5)
(i32.const 1)
)
(rethrow $label$5)
)
)
;; snip...
```
Stop using LLVM struct types for byval/sret
For `byval` and `sret`, the type has no semantic meaning, only the size matters\*†. Using `[N x i8]` is a more direct way to specify that we want `N` bytes, and avoids relying on LLVM's struct layout.
\*: The alignment would matter, if we didn't explicitly specify it. From what I can tell, we always specified the alignment for `sret`; for `byval`, we didn't until #112157.
†: For `byval`, the hidden copy may be impacted by padding in the LLVM struct type, i.e. padding bytes may not be copied. (I'm not sure if this is done today, but I think it would be legal.) But we manually pad our LLVM struct types specifically to avoid there ever being LLVM-visible padding, so that shouldn't be an issue.
Split out from #121577.
r? `@nikic`
Add asm goto support to `asm!`
Tracking issue: #119364
This PR implements asm-goto support, using the syntax described in "future possibilities" section of [RFC2873](https://rust-lang.github.io/rfcs/2873-inline-asm.html#asm-goto).
Currently I have only implemented the `label` part, not the `fallthrough` part (i.e. fallthrough is implicit). This doesn't reduce the expressive though, since you can use label-break to get arbitrary control flow or simply set a value and rely on jump threading optimisation to get the desired control flow. I can add that later if deemed necessary.
r? ``@Amanieu``
cc ``@ojeda``
Introduces the `arm64ec-pc-windows-msvc` target for building Arm64EC ("Emulation Compatible") binaries for Windows.
For more information about Arm64EC see <https://learn.microsoft.com/en-us/windows/arm/arm64ec>.
Tier 3 policy:
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
I will be the maintainer for this target.
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
Target uses the `arm64ec` architecture to match LLVM and MSVC, and the `-pc-windows-msvc` suffix to indicate that it targets Windows via the MSVC environment.
> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
Target name exactly specifies the type of code that will be produced.
> If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known to cause issues in Cargo.
Done.
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
> The target must not introduce license incompatibilities.
Uses the same dependencies, requirements and licensing as the other `*-pc-windows-msvc` targets.
> Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Understood.
> The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
> Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
> "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
Uses the same dependencies, requirements and licensing as the other `*-pc-windows-msvc` targets.
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
> This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
Understood, I am not a member of the Rust team.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
Both `core` and `alloc` are supported.
Support for `std` dependends on making changes to the standard library, `stdarch` and `backtrace` which cannot be done yet as the bootstrapping compiler raises a warning ("unexpected `cfg` condition value") for `target_arch = "arm64ec"`.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
Documentation is provided in src/doc/rustc/src/platform-support/arm64ec-pc-windows-msvc.md
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via @) to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
> Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
Understood.
Rollup of 5 pull requests
Successful merges:
- #120761 (Add initial support for DataFlowSanitizer)
- #121622 (Preserve same vtable pointer when cloning raw waker, to fix Waker::will_wake)
- #121716 (match lowering: Lower bindings in a predictable order)
- #121731 (Now that inlining, mir validation and const eval all use reveal-all, we won't be constraining hidden types here anymore)
- #121841 (`f16` and `f128` step 2: intrinsics)
r? `@ghost`
`@rustbot` modify labels: rollup
`f16` and `f128` step 2: intrinsics
Continuation of https://github.com/rust-lang/rust/pull/121728, another portion of https://github.com/rust-lang/rust/pull/114607.
This PR adds `f16` and `f128` intrinsics, and hooks them up to both HIR and LLVM. This is all still unexposed to the frontend, which will probably be the next step. Also update itanium mangling per `@rcvalle's` in https://github.com/rust-lang/rust/pull/121728/files#r1506570300, and fix a typo from step 1.
Once these types are usable in code, I will add the codegen tests from #114607 (codegen is passing on that branch)
This does add more `unimplemented!`s to Clippy, but I still don't think we can do better until library support is added.
r? `@compiler-errors`
cc `@Nilstrieb`
`@rustbot` label +T-compiler +F-f16_and_f128
Adds initial support for DataFlowSanitizer to the Rust compiler. It
currently supports `-Zsanitizer-dataflow-abilist`. Additional options
for it can be passed to LLVM command line argument processor via LLVM
arguments using `llvm-args` codegen option (e.g.,
`-Cllvm-args=-dfsan-combine-pointer-labels-on-load=false`).
Add stubs in IR and ABI for `f16` and `f128`
This is the very first step toward the changes in https://github.com/rust-lang/rust/pull/114607 and the [`f16` and `f128` RFC](https://rust-lang.github.io/rfcs/3453-f16-and-f128.html). It adds the types to `rustc_type_ir::FloatTy` and `rustc_abi::Primitive`, and just propagates those out as `unimplemented!` stubs where necessary.
These types do not parse yet so there is no feature gate, and it should be okay to use `unimplemented!`.
The next steps will probably be AST support with parsing and the feature gate.
r? `@compiler-errors`
cc `@Nilstrieb` suggested breaking the PR up in https://github.com/rust-lang/rust/pull/120645#issuecomment-1925900572
Remove useless lifetime of ArchiveBuilder
`trait ArchiveBuilder<'a>` has a seemingly useless lifetime a, so I remove it. If this is intentional, please reject this PR.
```rust
pub trait ArchiveBuilder<'a> {
fn add_file(&mut self, path: &Path);
fn add_archive(
&mut self,
archive: &Path,
skip: Box<dyn FnMut(&str) -> bool + 'static>,
) -> io::Result<()>;
fn build(self: Box<Self>, output: &Path) -> bool;
}
```
rename 'try' intrinsic to 'catch_unwind'
The intrinsic has nothing to do with `try` blocks, and corresponds to the stable `catch_unwind` function, so this makes a lot more sense IMO.
Also rename Miri's special function while we are at it, to reflect the level of abstraction it works on: it's an unwinding mechanism, on which Rust implements panics.
Add newtypes for bool fields/params/return types
Fixed all the cases of this found with some simple searches for `*/ bool` and `bool /*`; probably many more
Improve codegen diagnostic handling
Clarify the workings of the temporary `Diagnostic` type used to send diagnostics from codegen threads to the main thread.
r? `@estebank`
First, introduce a typedef `DiagnosticArgMap`.
Second, make the `args` field public, and remove the `args` getter and
`replace_args` setter. These were necessary previously because the getter
had a `#[allow(rustc::potential_query_instability)]` attribute, but that
was removed in #120931 when the args were changed from `FxHashMap` to
`FxIndexMap`. (All the other `Diagnostic` fields are public.)
Add "algebraic" fast-math intrinsics, based on fast-math ops that cannot return poison
Setting all of LLVM's fast-math flags makes our fast-math intrinsics very dangerous, because some inputs are UB. This set of flags permits common algebraic transformations, but according to the [LangRef](https://llvm.org/docs/LangRef.html#fastmath), only the flags `nnan` (no nans) and `ninf` (no infs) can produce poison.
And this uses the algebraic float ops to fix https://github.com/rust-lang/rust/issues/120720
cc `@orlp`
errors: only eagerly translate subdiagnostics
Subdiagnostics don't need to be lazily translated, they can always be eagerly translated. Eager translation is slightly more complex as we need to have a `DiagCtxt` available to perform the translation, which involves slightly more threading of that context.
This slight increase in complexity should enable later simplifications - like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages into the diagnostic structs rather than having them in separate files (working on that was what led to this change).
r? ```@nnethercote```
Implement intrinsics with fallback bodies
fixes#93145 (though we can port many more intrinsics)
cc #63585
The way this works is that the backend logic for generating custom code for intrinsics has been made fallible. The only failure path is "this intrinsic is unknown". The `Instance` (that was `InstanceDef::Intrinsic`) then gets converted to `InstanceDef::Item`, which represents the fallback body. A regular function call to that body is then codegenned. This is currently implemented for
* codegen_ssa (so llvm and gcc)
* codegen_cranelift
other backends will need to adjust, but they can just keep doing what they were doing if they prefer (though adding new intrinsics to the compiler will then require them to implement them, instead of getting the fallback body).
cc `@scottmcm` `@WaffleLapkin`
### todo
* [ ] miri support
* [x] default intrinsic name to name of function instead of requiring it to be specified in attribute
* [x] make sure that the bodies are always available (must be collected for metadata)
Subdiagnostics don't need to be lazily translated, they can always be
eagerly translated. Eager translation is slightly more complex as we need
to have a `DiagCtxt` available to perform the translation, which involves
slightly more threading of that context.
This slight increase in complexity should enable later simplifications -
like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages
into the diagnostic structs rather than having them in separate files
(working on that was what led to this change).
Signed-off-by: David Wood <david@davidtw.co>
LLVM 18 requires the evex512 feature to allow use of zmm registers.
LLVM automatically sets it when using a generic CPU, but not when
`-C target-cpu` is specified. This will result either in backend
legalization crashes, or code unexpectedly using ymm instead of
zmm registers.
For now, make sure that `avx512*` features imply `evex512`. Long
term we'll probably have to deal with the AVX10 mess somehow.
Build DebugInfo for async closures
The test is pretty bare, because I don't really know how to write debuginfo tests. I'd like to land this first, and then flesh it out correctly one it's no longer ICEing on master (which breaks people's ability to test using async closures).
r? oli-obk cc `@rust-lang/wg-debugging` (if any of y'all want to help me write a more fleshed out async closures test)
improve normalization of `Pointee::Metadata`
This PR makes it so that `<Wrapper<Tail> as Pointee>::Metadata` is normalized to `<Tail as Pointee>::Metadata` if we don't know `Wrapper<Tail>: Sized`. With that, the trait solver can prove projection predicates like `<Wrapper<Tail> as Pointee>::Metadata == <Tail as Pointee>::Metadata`, which makes it possible to use the metadata APIs to cast between the tail and the wrapper:
```rust
#![feature(ptr_metadata)]
use std::ptr::{self, Pointee};
fn cast_same_meta<T: ?Sized, U: ?Sized>(ptr: *const T) -> *const U
where
T: Pointee<Metadata = <U as Pointee>::Metadata>,
{
let (thin, meta) = ptr.to_raw_parts();
ptr::from_raw_parts(thin, meta)
}
struct Wrapper<T: ?Sized>(T);
fn cast_to_wrapper<T: ?Sized>(ptr: *const T) -> *const Wrapper<T> {
cast_same_meta(ptr)
}
```
Previously, this failed to compile:
```
error[E0271]: type mismatch resolving `<Wrapper<T> as Pointee>::Metadata == <T as Pointee>::Metadata`
--> src/lib.rs:16:5
|
15 | fn cast_to_wrapper<T: ?Sized>(ptr: *const T) -> *const Wrapper<T> {
| - found this type parameter
16 | cast_same_meta(ptr)
| ^^^^^^^^^^^^^^ expected `Wrapper<T>`, found type parameter `T`
|
= note: expected associated type `<Wrapper<T> as Pointee>::Metadata`
found associated type `<T as Pointee>::Metadata`
= note: an associated type was expected, but a different one was found
```
(Yes, you can already do this with `as` casts. But using functions is so much ✨ *safer* ✨, because you can't change the metadata on accident.)
---
This PR essentially changes the built-in impls of `Pointee` from this:
```rust
// before
impl Pointee for u8 {
type Metadata = ();
}
impl Pointee for [u8] {
type Metadata = usize;
}
// ...
impl Pointee for Wrapper<u8> {
type Metadata = ();
}
impl Pointee for Wrapper<[u8]> {
type Metadata = usize;
}
// ...
// This impl is only selected if `T` is a type parameter or unnormalizable projection or opaque type.
fallback impl<T: ?Sized> Pointee for Wrapper<T>
where
Wrapper<T>: Sized
{
type Metadata = ();
}
// This impl is only selected if `T` is a type parameter or unnormalizable projection or opaque type.
fallback impl<T /*: Sized */> Pointee for T {
type Metadata = ();
}
```
to this:
```rust
// after
impl Pointee for u8 {
type Metadata = ();
}
impl Pointee for [u8] {
type Metadata = usize;
}
// ...
impl<T: ?Sized> Pointee for Wrapper<T> {
// in the old solver this will instead project to the "deep" tail directly,
// e.g. `Wrapper<Wrapper<T>>::Metadata = T::Metadata`
type Metadata = <T as Pointee>::Metadata;
}
// ...
// This impl is only selected if `T` is a type parameter or unnormalizable projection or opaque type.
fallback impl<T /*: Sized */> Pointee for T {
type Metadata = ();
}
```
Invert diagnostic lints.
That is, change `diagnostic_outside_of_impl` and `untranslatable_diagnostic` from `allow` to `deny`, because more than half of the compiler has been converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow` attributes, which proves that this change is warranted.
r? ````@davidtwco````
That is, change `diagnostic_outside_of_impl` and
`untranslatable_diagnostic` from `allow` to `deny`, because more than
half of the compiler has be converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow`
attributes, which proves that this change is warranted.
Rollup of 8 pull requests
Successful merges:
- #120484 (Avoid ICE when is_val_statically_known is not of a supported type)
- #120516 (pattern_analysis: cleanup manual impls)
- #120517 (never patterns: It is correct to lower `!` to `_`.)
- #120523 (Improve `io::Read::read_buf_exact` error case)
- #120528 (Store SHOULD_CAPTURE as AtomicU8)
- #120529 (Update data layouts in custom target tests for LLVM 18)
- #120531 (Remove a bunch of `has_errors` checks that have no meaningful or the wrong effect)
- #120533 (Correct paths for hexagon-unknown-none-elf platform doc)
r? `@ghost`
`@rustbot` modify labels: rollup
Avoid ICE when is_val_statically_known is not of a supported type
2 ICE with 1 stone!
1. Implement `llvm.is.constant.ptr` to avoid first ICE in linked issue.
2. return `false` when the argument is not one of `i*`/`f*`/`ptr` to avoid second ICE.
fixes#120480
- `emitted_at` isn't used outside the crate.
- `code` and `messages` are public fields, so there's no point have
trivial getters/setters for them.
- `suggestions` is public, so the comment about "functionality on
`Diagnostic`" isn't needed.
llvm: change data layout bug to an error and make it trigger more
Fixes#33446.
Don't skip the inconsistent data layout check for custom LLVMs or non-built-in targets.
With #118708, all targets will have a simple test that would trigger this error if LLVM's data layouts do change - so data layouts would be corrected during the LLVM upgrade. Therefore, with builtin targets, this error won't happen with our LLVM because each target will have been confirmed to work. With non-builtin targets, this error is probably useful to have because you can change the data layout in your target and if it is wrong then that could lead to bugs.
When using a custom LLVM, the same justification makes sense for non-builtin targets as with our LLVM, the user can update their target to match their LLVM and that's probably a good thing to do. However, with a custom LLVM, the user cannot change the builtin target data layouts if they don't match - though given that the compiler's data layout is used for layout computation and a bunch of other things - you could get some bugs because of the mismatch and probably want to know about that. I'm not sure if this is something that people do and is okay, but I doubt it?
`CFG_LLVM_ROOT` was also always set during local development with `download-ci-llvm` so this bug would never trigger locally.
In #33446, two points are raised:
- In the issue itself, changing this from a `bug!` to a proper error is what is suggested, by using `isCompatibleDataLayout` from LLVM, but that function still just does the same thing that we do and check for equality, so I've avoided the additional code necessary to do that FFI call.
- `@Mark-Simulacrum` suggests a different check is necessary to maintain backwards compatibility with old LLVM versions. I don't know how often this comes up, but we can do that with some simple string manipulation + LLVM version checks as happens already for LLVM 17 just above this diff.
Replacement of #114390: Add new intrinsic `is_var_statically_known` and optimize pow for powers of two
This adds a new intrinsic `is_val_statically_known` that lowers to [``@llvm.is.constant.*`](https://llvm.org/docs/LangRef.html#llvm-is-constant-intrinsic).` It also applies the intrinsic in the int_pow methods to recognize and optimize the idiom `2isize.pow(x)`. See #114390 for more discussion.
While I have extended the scope of the power of two optimization from #114390, I haven't added any new uses for the intrinsic. That can be done in later pull requests.
Note: When testing or using the library, be sure to use `--stage 1` or higher. Otherwise, the intrinsic will be a noop and the doctests will be skipped. If you are trying out edits, you may be interested in [`--keep-stage 0`](https://rustc-dev-guide.rust-lang.org/building/suggested.html#faster-builds-with---keep-stage).
Fixes#47234Resolves#114390
`@Centri3`
Fix overflow check
Make MIRI choose the path randomly and rename the intrinsic
Add back test
Add miri test and make it operate on `ptr`
Define `llvm.is.constant` for primitives
Update MIRI comment and fix test in stage2
Add const eval test
Clarify that both branches must have the same side effects
guaranteed non guarantee
use immediate type instead
Co-Authored-By: Ralf Jung <post@ralfj.de>
With https://reviews.llvm.org/D86310 LLVM now has i128 aligned to
16-bytes on x86 based platforms. This will be in LLVM-18. This patch
updates all our spec targets to be 16-byte aligned, and removes the
alignment when speaking to older LLVM.
This results in Rust overaligning things relative to LLVM on older LLVMs.
This alignment change was discussed in rust-lang/compiler-team#683
See #54341 for additional information about why this is happening and
where this will be useful in the future.
This *does not* stabilize `i128`/`u128` for FFI.
Don't skip the inconsistent data layout check for custom LLVMs.
With #118708, all targets will have a simple test that would trigger this
check if LLVM's data layouts do change - so data layouts would be
corrected during the LLVM upgrade. Therefore, with builtin targets, this
check won't trigger with our LLVM because each target will have been
confirmed to work. With non-builtin targets, this check is probably
useful to have because you can change the data layout in your target and
if its wrong then that could lead to bugs.
When using a custom LLVM, the same justification makes sense for
non-builtin targets as with our LLVM, the user can update their target to
match their LLVM and that's probably a good thing to do. However, with
a custom LLVM, the user cannot change the builtin target data layouts if
they don't match - though given that the compiler's data layout is used
for layout computation and a bunch of other things - you could get some
bugs because of the mismatch and probably want to know about that.
`CFG_LLVM_ROOT` was also always set during local development with
`download-ci-llvm` so this bug would never trigger locally.
Signed-off-by: David Wood <david@davidtw.co>
`is_force_warn` is only possible for diagnostics with `Level::Warning`,
but it is currently stored in `Diagnostic::code`, which every diagnostic
has.
This commit:
- removes the boolean `DiagnosticId::Lint::is_force_warn` field;
- adds a `ForceWarning` variant to `Level`.
Benefits:
- The common `Level::Warning` case now has no arguments, replacing
lots of `Warning(None)` occurrences.
- `rustc_session::lint::Level` and `rustc_errors::Level` are more
similar, both having `ForceWarning` and `Warning`.
In #119606 I added them and used a `_mv` suffix, but that wasn't great.
A `with_` prefix has three different existing uses.
- Constructors, e.g. `Vec::with_capacity`.
- Wrappers that provide an environment to execute some code, e.g.
`with_session_globals`.
- Consuming chaining methods, e.g. `Span::with_{lo,hi,ctxt}`.
The third case is exactly what we want, so this commit changes
`DiagnosticBuilder::foo_mv` to `DiagnosticBuilder::with_foo`.
Thanks to @compiler-errors for the suggestion.
Add -Zuse-sync-unwind
Currently Rust uses async unwind by default, but async unwind will bring non-negligible size overhead. it would be nice to allow users to choose this.
In addition, async unwind currently prevents LLVM from generate compact unwind for MachO, if one wishes to generate compact unwind for MachO, then also needs this flag.
Separate immediate and in-memory ScalarPair representation
Currently, we assume that ScalarPair is always represented using a two-element struct, both as an immediate value and when stored in memory.
This currently works fairly well, but runs into problems with https://github.com/rust-lang/rust/pull/116672, where a ScalarPair involving an i128 type can no longer be represented as a two-element struct in memory. For example, the tuple `(i32, i128)` needs to be represented in-memory as `{ i32, [3 x i32], i128 }` to satisfy alignment requirements. Using `{ i32, i128 }` instead will result in the second element being stored at the wrong offset (prior to LLVM 18).
Resolve this issue by no longer requiring that the immediate and in-memory type for ScalarPair are the same. The in-memory type will now look the same as for normal struct types (and will include padding filler and similar), while the immediate type stays a simple two-element struct type. This also means that booleans in immediate ScalarPair are now represented as i1 rather than i8, just like we do everywhere else.
The core change here is to llvm_type (which now treats ScalarPair as a normal struct) and immediate_llvm_type (which returns the two-element struct that llvm_type used to produce). The rest is fixing things up to no longer assume these are the same. In particular, this switches places that try to get pointers to the ScalarPair elements to use byte-geps instead of struct-geps.
Support reg_addr register class in s390x inline assembly
In s390x, `r0` cannot be used as an address register (it is evaluated as zero in an address context).
Therefore, currently, in assemblies involving memory accesses, `r0` must be [marked as clobbered](1a1155653a/src/arch/s390x.rs (L58)) or [explicitly used to a non-address](1a1155653a/src/arch/s390x.rs (L135)) or explicitly use an address register to prevent `r0` from being allocated to a register for the address.
This patch adds a register class for allocating general-purpose registers, except `r0`, to make it easier to use address registers. (powerpc already has a register class (reg_nonzero) for a similar purpose.)
This is identical to the `a` constraint in LLVM and GCC:
https://llvm.org/docs/LangRef.html#supported-constraint-code-list
> a: A 32, 64, or 128-bit integer address register (excludes R0, which in an address context evaluates as zero).
https://gcc.gnu.org/onlinedocs/gcc/Machine-Constraints.html
> a
> Address register (general purpose register except r0)
cc ``@uweigand``
r? ``@Amanieu``
Because it's redundant w.r.t. `Diagnostic::is_lint`, which is present
for every diagnostic level.
`struct_lint_level_impl` was the only place that set the `Error` field
to `true`, and it's also the only place that calls
`Diagnostic::is_lint()` to set the `is_lint` field.
coverage: Avoid a query stability hazard in `function_coverage_map`
When #118865 started enforcing the `rustc::potential_query_instability` lint in `rustc_codegen_llvm`, it added an exemption for this site, arguing that the entries are only used to create a list of filenames that is later sorted.
However, the list of entries also gets traversed when creating the function coverage records in LLVM IR, which may be sensitive to hash-based ordering.
This patch therefore changes `function_coverage_map` to use `FxIndexMap`, which should avoid hash-based instability by iterating in insertion order.
cc ``@Enselic``
`Diagnostic` has 40 methods that return `&mut Self` and could be
considered setters. Four of them have a `set_` prefix. This doesn't seem
necessary for a type that implements the builder pattern. This commit
removes the `set_` prefixes on those four methods.
When #118865 started enforcing the `rustc::potential_query_instability` lint in
`rustc_codegen_llvm`, it added an exemption for this site, arguing that the
entries are only used to create a list of filenames that is later sorted.
However, the list of entries also gets traversed when creating the function
coverage records in LLVM IR, which may be sensitive to hash-based ordering.
This patch therefore changes `function_coverage_map` to use `FxIndexMap`, which
should avoid hash-based instability by iterating in insertion order.
This involves lots of breaking changes. There are two big changes that
force changes. The first is that the bitflag types now don't
automatically implement normal derive traits, so we need to derive them
manually.
Additionally, bitflags now have a hidden inner type by default, which
breaks our custom derives. The bitflags docs recommend using the impl
form in these cases, which I did.
Remove `DiagCtxt` API duplication
`DiagCtxt` defines the internal API for creating and emitting diagnostics: methods like `struct_err`, `struct_span_warn`, `note`, `create_fatal`, `emit_bug`. There are over 50 methods.
Some of these methods are then duplicated across several other types: `Session`, `ParseSess`, `Parser`, `ExtCtxt`, and `MirBorrowckCtxt`. `Session` duplicates the most, though half the ones it does are unused. Each duplicated method just calls forward to the corresponding method in `DiagCtxt`. So this duplication exists to (in the best case) shorten chains like `ecx.tcx.sess.parse_sess.dcx.emit_err()` to `ecx.emit_err()`.
This API duplication is ugly and has been bugging me for a while. And it's inconsistent: there's no real logic about which methods are duplicated, and the use of `#[rustc_lint_diagnostic]` and `#[track_caller]` attributes vary across the duplicates.
This PR removes the duplicated API methods and makes all diagnostic creation and emission go through `DiagCtxt`. It also adds `dcx` getter methods to several types to shorten chains. This approach scales *much* better than API duplication; indeed, the PR adds `dcx()` to numerous types that didn't have API duplication: `TyCtxt`, `LoweringCtxt`, `ConstCx`, `FnCtxt`, `TypeErrCtxt`, `InferCtxt`, `CrateLoader`, `CheckAttrVisitor`, and `Resolver`. These result in a lot of changes from `foo.tcx.sess.emit_err()` to `foo.dcx().emit_err()`. (You could do this with more types, but it gets into diminishing returns territory for types that don't emit many diagnostics.)
After all these changes, some call sites are more verbose, some are less verbose, and many are the same. The total number of lines is reduced, mostly because of the removed API duplication. And consistency is increased, because calls to `emit_err` and friends are always preceded with `.dcx()` or `.dcx`.
r? `@compiler-errors`
Unify SourceFile::name_hash and StableSourceFileId
This PR adapts the existing `StableSourceFileId` type so that it can be used instead of the `name_hash` field of `SourceFile`. This simplifies a few things that were kind of duplicated before.
The PR should also fix issues https://github.com/rust-lang/rust/issues/112700 and https://github.com/rust-lang/rust/issues/115835, but I was not able to reproduce these issues in a regression test. As far as I can tell, the root cause of these issues is that the id of the originating crate is not hashed in the `HashStable` impl of `Span` and thus cache entries that should have been considered invalidated were loaded. After this PR, the `stable_id` field of `SourceFile` includes information about the originating crate, so that ICE should not occur anymore.
Lots of vectors of messages called `message` or `msg`. This commit
pluralizes them.
Note that `emit_message_default` and `emit_messages_default` both
already existed, and both process a vector, so I renamed the former
`emit_messages_default_inner` because it's called by the latter.
And make all hand-written `IntoDiagnostic` impls generic, by using
`DiagnosticBuilder::new(dcx, level, ...)` instead of e.g.
`dcx.struct_err(...)`.
This means the `create_*` functions are the source of the error level.
This change will let us remove `struct_diagnostic`.
Note: `#[rustc_lint_diagnostics]` is added to `DiagnosticBuilder::new`,
it's necessary to pass diagnostics tests now that it's used in
`into_diagnostic` functions.
coverage: Skip instrumenting a function if no spans were extracted from MIR
The immediate symptoms of #118643 were fixed by #118666, but some users reported that their builds now encounter another coverage-related ICE:
```
error: internal compiler error: compiler/rustc_codegen_llvm/src/coverageinfo/mapgen.rs:98:17: A used function should have had coverage mapping data but did not: (...)
```
I was able to reproduce at least one cause of this error: if no relevant spans could be extracted from a function, but the function contains `CoverageKind::SpanMarker` statements, then codegen still thinks the function is instrumented and complains about the fact that it has no coverage spans.
This PR prevents that from happening in two ways:
- If we didn't extract any relevant spans from MIR, skip instrumenting the entire function and don't create a `FunctionCoverateInfo` for it.
- If coverage codegen sees a `CoverageKind::SpanMarker` statement, skip it early and avoid creating `func_coverage`.
---
Fixes#118850.
Coverage marker statements should have no effect on codegen, but in some cases
they could have the side-effect of creating a `func_coverage` entry for their
enclosing function. That can lead to an ICE for functions that don't actually
have any coverage spans.
Currently, we assume that ScalarPair is always represented using
a two-element struct, both as an immediate value and when stored
in memory.
This currently works fairly well, but runs into problems with
https://github.com/rust-lang/rust/pull/116672, where a ScalarPair
involving an i128 type can no longer be represented as a two-element
struct in memory. For example, the tuple `(i32, i128)` needs to be
represented in-memory as `{ i32, [3 x i32], i128 }` to satisfy
alignment requirement. Using `{ i32, i128 }` instead will result in
the second element being stored at the wrong offset (prior to
LLVM 18).
Resolve this issue by no longer requiring that the immediate and
in-memory type for ScalarPair are the same. The in-memory type
will now look the same as for normal struct types (and will include
padding filler and similar), while the immediate type stays a
simple two-element struct type. This also means that booleans in
immediate ScalarPair are now represented as i1 rather than i8,
just like we do everywhere else.
The core change here is to llvm_type (which now treats ScalarPair
as a normal struct) and immediate_llvm_type (which returns the
two-element struct that llvm_type used to produce). The rest is
fixing things up to no longer assume these are the same. In
particular, this switches places that try to get pointers to the
ScalarPair elements to use byte-geps instead of struct-geps.
Sets the accessibility of types and fields in DWARF using
`DW_AT_accessibility` attribute.
`DW_AT_accessibility` (public/protected/private) isn't exactly right for
Rust, but neither is `DW_AT_visibility` (local/exported/qualified), and
there's no way to set `DW_AT_visbility` in LLVM's API.
Signed-off-by: David Wood <david@davidtw.co>
It's necessary for `derive(Diagnostic)`, but is best avoided elsewhere
because there are clearer alternatives.
This required adding `Handler::struct_almost_fatal`.
Fix alignment passed down to LLVM for simd_masked_load
Follow up to #117953
The alignment for a masked load operation should be that of the element/lane, not the vector as a whole
It can produce miscompilations after the LLVM optimizer notices the higher alignment and promotes this to an unmasked, aligned load followed up by blend/select - https://rust.godbolt.org/z/KEeGbevbb
Stop allowing `rustc::potential_query_instability` on all of
`rustc_codegen_llvm` and instead allow it on a case-by-case basis. In
this case, both instances are safe to allow.
`.debug_pubnames` and `.debug_pubtypes` are poorly designed and people
seldom use them. However, they take a considerable portion of size in
the final binary. This tells LLVM stop emitting those sections on
DWARFv4 or lower. DWARFv5 use `.debug_names` which is more concise
in size and performant for name lookup.
Implement repr(packed) for repr(simd)
This allows creating vectors with non-power-of-2 lengths that do not have padding. See rust-lang/portable-simd#319
detects redundant imports that can be eliminated.
for #117772 :
In order to facilitate review and modification, split the checking code and
removing redundant imports code into two PR.
Add more SIMD platform-intrinsics
- [x] simd_masked_load
- [x] LLVM codegen - llvm.masked.load
- [x] cranelift codegen - implemented but untested
- [ ] simd_masked_store
- [x] LLVM codegen - llvm.masked.store
- [ ] cranelift codegen
Also added a run-pass test to test both intrinsics, and additional build-fail & check-fail to cover validation for both intrinsics
update target feature following LLVM API change
LLVM commit e817966718 renamed* the `unaligned-scalar-mem` target feature to `fast-unaligned-access`.
(*) technically the commit folded two previous features into one, but there are no references to the other one in rust.
coverage: Use `SpanMarker` to improve coverage spans for `if !` expressions
Coverage instrumentation works by extracting source code spans from MIR. However, some kinds of syntax are effectively erased during MIR building, so their spans don't necessarily exist anywhere in MIR, making them invisible to the coverage instrumentor (unless we resort to various heuristics and hacks to recover them).
This PR introduces `CoverageKind::SpanMarker`, which is a new variant of `StatementKind::Coverage`. Its sole purpose is to represent spans that would otherwise not appear in MIR, so that the coverage instrumentor can extract them.
When coverage is enabled, the MIR builder can insert these dummy statements as needed, to improve the accuracy of spans used by coverage mappings.
Fixes#115468.
---
```@rustbot``` label +A-code-coverage
Add emulated TLS support
This is a reopen of https://github.com/rust-lang/rust/pull/96317 . many android devices still only use 128 pthread keys, so using emutls can be helpful.
Currently LLVM uses emutls by default for some targets (such as android, openbsd), but rust does not use it, because `has_thread_local` is false.
This commit has some changes to allow users to enable emutls:
1. add `-Zhas-thread-local` flag to specify that std uses `#[thread_local]` instead of pthread key.
2. when using emutls, decorate symbol names to find thread local symbol correctly.
3. change `-Zforce-emulated-tls` to `-Ztls-model=emulated` to explicitly specify whether to generate emutls.
r? `@Amanieu`
There are cases where coverage instrumentation wants to show a span for some
syntax element, but there is no MIR node that naturally carries that span, so
the instrumentor can't see it.
MIR building can now use this new kind of coverage statement to deliberately
include those spans in MIR, attached to a dummy statement that has no other
effect.
Avoid adding builtin functions to `symbols.o`
We found performance regressions in #113923. The problem seems to be that `--gc-sections` does not remove these symbols. I tested that lld removes these symbols, but ld and gold do not.
I found that `used` adds symbols to `symbols.o` at 3e202ead60/compiler/rustc_codegen_ssa/src/back/linker.rs (L1786-L1791).
The PR removes builtin functions.
Note that under LTO, ld still preserves these symbols. (lld will still remove them.)
The first commit also fixes#118559. But I think the second commit also makes sense.
compile-time evaluation: detect writes through immutable pointers
This has two motivations:
- it unblocks https://github.com/rust-lang/rust/pull/116745 (and therefore takes a big step towards `const_mut_refs` stabilization), because we can now detect if the memory that we find in `const` can be interned as "immutable"
- it would detect the UB that was uncovered in https://github.com/rust-lang/rust/pull/117905, which was caused by accidental stabilization of `copy` functions in `const` that can only be called with UB
When UB is detected, we emit a future-compat warn-by-default lint. This is not a breaking change, so completely in line with [the const-UB RFC](https://rust-lang.github.io/rfcs/3016-const-ub.html), meaning we don't need t-lang FCP here. I made the lint immediately show up for dependencies since it is nearly impossible to even trigger this lint without `const_mut_refs` -- the accidentally stabilized `copy` functions are the only way this can happen, so the crates that popped up in #117905 are the only causes of such UB (in the code that crater covers), and the three cases of UB that we know about have all been fixed in their respective crates already.
The way this is implemented is by making use of the fact that our interpreter is already generic over the notion of provenance. For CTFE we now use the new `CtfeProvenance` type which is conceptually an `AllocId` plus a boolean `immutable` flag (but packed for a more efficient representation). This means we can mark a pointer as immutable when it is created as a shared reference. The flag will be propagated to all pointers derived from this one. We can then check the immutable flag on each write to reject writes through immutable pointers.
I just hope perf works out.
Currently LLVM uses emutls by default
for some targets (such as android, openbsd),
but rust does not use it, because `has_thread_local` is false.
This commit has some changes to allow users to enable emutls:
1. add `-Zhas-thread-local` flag to specify
that std uses `#[thread_local]` instead of pthread key.
2. when using emutls, decorate symbol names
to find thread local symbol correctly.
3. change `-Zforce-emulated-tls` to `-Ztls-model=emulated`
to explicitly specify whether to generate emutls.
These impls are all needed for just a single `IntoDiagnostic` type, not
a family of them.
Note that `ErrorGuaranteed` is the default type parameter for
`IntoDiagnostic`.
Restore `#![no_builtins]` crates participation in LTO.
After #113716, we can make `#![no_builtins]` crates participate in LTO again.
`#![no_builtins]` with LTO does not result in undefined references to the error. I believe this type of issue won't happen again.
Fixes#72140. Fixes#112245. Fixes#110606. Fixes#105734. Fixes#96486. Fixes#108853. Fixes#108893. Fixes#78744. Fixes#91158. Fixes https://github.com/rust-lang/cargo/issues/10118. Fixes https://github.com/rust-lang/compiler-builtins/issues/347.
The `nightly-2023-07-20` version does not always reproduce problems due to changes in compiler-builtins, core, and user code. That's why this issue recurs and disappears.
Some issues were not tested due to the difficulty of reproducing them.
r? pnkfelix
cc `@bjorn3` `@japaric` `@alexcrichton` `@Amanieu`
Add `-Zfunction-return={keep,thunk-extern}` option
This is intended to be used for Linux kernel RETHUNK builds.
With this commit (optionally backported to Rust 1.73.0), plus a patched Linux kernel to pass the flag, I get a RETHUNK build with Rust enabled that is `objtool`-warning-free and is able to boot in QEMU and load a sample Rust kernel module.
Issue: https://github.com/rust-lang/rust/issues/116853.
This is intended to be used for Linux kernel RETHUNK builds.
With this commit (optionally backported to Rust 1.73.0), plus a
patched Linux kernel to pass the flag, I get a RETHUNK build with
Rust enabled that is `objtool`-warning-free and is able to boot in
QEMU and load a sample Rust kernel module.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
If the TargetMachine is disposed after the Context is disposed, it can
lead to use after frees in some cases.
I've observed this happening occasionally on code compiled for
aarch64-pc-windows-msvc using `-Zstack-protector=strong` but other users
have reported AVs from host aarch64-pc-windows-msvc compilers as well.
Currently we always do this:
```
use rustc_fluent_macro::fluent_messages;
...
fluent_messages! { "./example.ftl" }
```
But there is no need, we can just do this everywhere:
```
rustc_fluent_macro::fluent_messages! { "./example.ftl" }
```
which is shorter.
The `fluent_messages!` macro produces uses of
`crate::{D,Subd}iagnosticMessage`, which means that every crate using
the macro must have this import:
```
use rustc_errors::{DiagnosticMessage, SubdiagnosticMessage};
```
This commit changes the macro to instead use
`rustc_errors::{D,Subd}iagnosticMessage`, which avoids the need for the
imports.
Tighten up link attributes for llvm-wrapper bindings
Fixes https://github.com/rust-lang/rust/issues/118084 by moving all of the declarations of symbols from `llvm_rust` into a separate extern block with `#[link(name = "llvm-wrapper", kind = "static")]`.
This also renames `LLVMTimeTraceProfiler*` to `LLVMRustTimeTraceProfiler*` because those are functions from `llvm_rust`.
r? tmiasko
Enable Rust to use the EHCont security feature of Windows
In the future Windows will enable Control-flow Enforcement Technology (CET aka Shadow Stacks). To protect the path where the context is updated during exception handling, the binary is required to enumerate valid unwind entrypoints in a dedicated section which is validated when the context is being set during exception handling.
The required support for EHCONT Guard has already been merged into LLVM, long ago. This change simply adds the Rust codegen option to enable it.
Relevant LLVM change: https://reviews.llvm.org/D40223
This also adds a new `ehcont-guard` option to the bootstrap config which enables EHCont Guard when building std.
We at Microsoft have been using this feature for a significant period of time; we are confident that the LLVM feature, when enabled, generates well-formed code.
We currently enable EHCONT using a codegen feature, but I'm certainly open to refactoring this to be a target feature instead, or to use any appropriate mechanism to enable it.
By default, `newtype_index!` types get a default `Encodable`/`Decodable`
impl. You can opt out of this with `custom_encodable`. Opting out is the
opposite to how Rust normally works with autogenerated (derived) impls.
This commit inverts the behaviour, replacing `custom_encodable` with
`encodable` which opts into the default `Encodable`/`Decodable` impl.
Only 23 of the 59 `newtype_index!` occurrences need `encodable`.
Even better, there were eight crates with a dependency on
`rustc_serialize` just from unused default `Encodable`/`Decodable`
impls. This commit removes that dependency from those eight crates.
In the future Windows will enable Control-flow Enforcement Technology
(CET aka Shadow Stacks). To protect the path where the context is
updated during exception handling, the binary is required to enumerate
valid unwind entrypoints in a dedicated section which is validated when
the context is being set during exception handling.
The required support for EHCONT has already been merged into LLVM,
long ago. This change adds the Rust codegen option to enable it.
Reference:
* https://reviews.llvm.org/D40223
This also adds a new `ehcont-guard` option to the bootstrap config which
enables EHCont Guard when building std.
Ensure sanity of all computed ABIs
This moves the ABI sanity assertions from the codegen backend to the ABI computation logic. Sadly, due to past mistakes, we [have to](https://github.com/rust-lang/rust/pull/117351#issuecomment-1788495503) be able to compute a sane ABI for nonsensical function types like `extern "C" fn(str) -> str`. So to make the sanity check pass we first need to make all ABI adjustment deal with unsized types... and we have no shared infrastructure for those adjustments, so that's a bunch of copy-paste. At least we have assertions failing loudly when one accidentally sets a different mode for an unsized argument.
To achieve this, this re-lands the parts of https://github.com/rust-lang/rust/pull/80594 that got reverted in https://github.com/rust-lang/rust/pull/81388. To avoid breaking wasm ABI again, that ABI now explicitly opts-in to the (wrong, broken) ABI that we currently keep for backwards compatibility. That's still better than having *every* ABI use the wrong broken default!
Cc `@bjorn3`
Fixes https://github.com/rust-lang/rust/issues/115845
Remove asmjs
Fulfills [MCP 668](https://github.com/rust-lang/compiler-team/issues/668).
`asmjs-unknown-emscripten` does not work as-specified, and lacks essential upstream support for generating asm.js, so it should not exist at all.
Ensure strings created with `const_str` get the `unnamed_addr` attribute
This function (`const_str`) is only used when we need to invent a string during codegen -- for example, for a panic message to pass when codegening some of the assert/panic/etc terminators (for stuff like divide by zero).
AFAICT all other consts, such as the user-defined ones from const eval, should already be getting this attribute (things that come from a ConstAllocation do, for example). Which means that the "unnamed" part is even more true than usual here, these aren't strings that even exist as far as the user can tell.
~~Setting this attribute allows LLVM to merge these constants, leading to significant binary size savings (much more than I would expect). On x86_64-unknown-linux-gnu, t takes a build of ripgrep (release without debug info) from 9.7MiB to 6.0MiB (a savings of over 30%!?), and a build of rustc_driver's shared object from 123MiB to 112MiB (less drastic, but still over 10% reduced).~~
~~The effect on ripgrep is substantially reduced on macOS for reasons beyond me (I may have fucked up the test), only saving around 0.2MiB, although rustc_driver is still around 10MB or smaller than it had been previously.~~
~~This raises some questions, such as "does that mean 1/3 of ripgrep was made of division by zero complaints?" I'm not sure, that may be the case. The output of `strings path/to/rg` is \~2MB smaller, so it seems like a lot of it was. Allowing these to be merged presumably also allow functions that contain them to be merged (if the addresses had semantic meaning, then it stands).~~
~~I intend to do some more analysis here, but I got this up as soon as I realized that this attribute was only missing for internal const strings, and all other ones already get it.~~
Edit: The wins are much more marginal, but there's some argument to do this for the sake of consistency.
Add -Z llvm_module_flag
Allow adding values to the `!llvm.module.flags` metadata for a generated module. The syntax is
`-Z llvm_module_flag=<name>:<type>:<value>:<behavior>`
Currently only u32 values are supported but the type is required to be specified for forward compatibility. The `behavior` element must match one of the named LLVM metadata behaviors.viors.
This flag is expected to be perma-unstable.
Allow adding values to the `!llvm.module.flags` metadata for a generated
module. The syntax is
`-Z llvm_module_flag=<name>:<type>:<value>:<behavior>`
Currently only u32 values are supported but the type is required to be
specified for forward compatibility. The `behavior` element must match
one of the named LLVM metadata behaviors.viors.
This flag is expected to be perma-unstable.
consts: remove dead code around `i1` constant values
`LLVMConstZext` recently got deleted, and it turns out (thanks to `@nikic` for knowing!) that this is dead code. Tests all pass for me without this logic, and per nikic:
> We always generate constants in "relocatable bag of bytes"
> representation, so you're never going to get a plain bool.
So this should be a safe thing to do.
r? `@nikic`
`@rustbot` label: +llvm-main
`LLVMConstZext` recently got deleted, and it turns out (thanks to @nikic
for knowing!) that this is dead code. Tests all pass for me without this
logic, and per nikic:
> We always generate constants in "relocatable bag of bytes"
> representation, so you're never going to get a plain bool.
So this should be a safe thing to do.
r? @nikic
@rustbot label: +llvm-main
Most notably, this commit changes the `pub use crate::*;` in that file
to `use crate::*;`. This requires a lot of `use` items in other crates
to be adjusted, because everything defined within `rustc_span::*` was
also available via `rustc_span::source_map::*`, which is bizarre.
The commit also removes `SourceMap::span_to_relative_line_string`, which
is unused.
- Sort dependencies and features sections.
- Add `tidy` markers to the sorted sections so they stay sorted.
- Remove empty `[lib`] sections.
- Remove "See more keys..." comments.
Excluded files:
- rustc_codegen_{cranelift,gcc}, because they're external.
- rustc_lexer, because it has external use.
- stable_mir, because it has external use.
coverage: Consistently remove unused counter IDs from expressions/mappings
If some coverage counters were removed by MIR optimizations, we need to take care not to refer to those counter IDs in coverage mappings, and instead replace them with a constant zero value. If we don't, `llvm-cov` might see a too-large counter ID and silently discard the entire function from its coverage reports.
Fixes#117012.
