Fix `x setup -h -v` should work
r? `@jyn514`
I have to convert profile to path and back in order to remove special-casing in bootstrap. I also check for `dry_run` so that `config.toml` and/ or `.git/hooks/pre-push` will not be created if `--dry-run` is specified.
Please help me see if this is ok, thanks alot!
Migrate rustc_mir_build diagnostics
Rebases https://github.com/rust-lang/rust/pull/100854
~~The remaining issue is how to better resolve 72bea68af4~~
~~The diagnostic macros seems to generate a broken diagnostic, and I couldn't figure out how to manually format the fluent message, so I hardcoded the format string for now. I'd like pointers to a better fix for this.~~
Also, I'm not 100% sure I didn't mess up a rebase somewhere 🙂
r? `@davidtwco`
fs: Fix#50619 (again) and add a regression test
Bug #50619 was fixed by adding an end_of_stream flag in #50630.
Unfortunately, that fix only applied to the readdir_r() path. When I
switched Linux to use readdir() in #92778, I inadvertently reintroduced
the bug on that platform. Other platforms that had always used
readdir() were presumably never fixed.
This patch enables end_of_stream for all platforms, and adds a
Linux-specific regression test that should hopefully prevent the bug
from being reintroduced again.
std::fmt: Use args directly in example code
The lint "clippy::uninlined_format_args" recommends inline variables in format strings. Fix two places in the docs that do not do this. I noticed this because I copy/pasted one example in to my project, then noticed this lint error. This fixes:
```
error: variables can be used directly in the `format!` string
--> src/main.rs:30:22
|
30 | let string = format!("{:.*}", decimals, magnitude);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
error: variables can be used directly in the `format!` string
--> src/main.rs:39:2
|
39 | write!(&mut io::stdout(), "{}", args).unwrap();
```
Speed up tidy
This can be reviewed commit by commit since they contain separate optimizations.
```
# master
$ taskset -c 0-5 hyperfine './x test tidy'
Benchmark #1: ./x test tidy
Time (mean ± σ): 4.857 s ± 0.064 s [User: 12.967 s, System: 2.014 s]
Range (min … max): 4.779 s … 4.997 s 10 runs
# PR
$ taskset -c 0-5 hyperfine './x test tidy'
Benchmark #1: ./x test tidy
Time (mean ± σ): 3.672 s ± 0.035 s [User: 10.524 s, System: 2.029 s]
Range (min … max): 3.610 s … 3.725 s 10 runs
```
Support call and drop terminators in custom mir
The only caveat with this change is that cleanup blocks are not supported. I would like to add them, but it's not quite clear to me what the best way to do that is, so I'll have to think about it some more.
r? ``@oli-obk``
rustdoc: clean up margin CSS for scraped examples
* This stops applying a margin to the additional example links. Because these links are `display: inline`, it doesn't actually do anything.
* This switches from using a margin-bottom with a special exception for the examples themselves, plus an additional margin on the hide button, to instead using just margin-top on the examples, with an exception for the first one.
No user-visible changes should result from this.
Allow blocking `Command::output`
### Problem
Currently, `Command::output` is internally implemented using `Command::spawn`. This is problematic because some targets (like UEFI) do not actually support multitasking and thus block while the program is executing. This coupling does not make much sense as `Command::output` is supposed to block until the execution is complete anyway and thus does not need to rely on a non-blocking `Child` or any other intermediate.
### Solution
This PR moves the implementation of `Command::output` to `std::sys`. This means targets can choose to implement only `Command::output` without having to implement `Command::spawn`.
### Additional Information
This was originally conceived when working on https://github.com/rust-lang/rust/pull/100316. Currently, the only target I know about that will benefit from this change is UEFI.
This PR can also be used to implement more efficient `Command::output` since the intermediate `Process` is not actually needed anymore, but that is outside the scope of this PR.
Since this is not a public API change, I'm not sure if an RFC is needed or not.
Symlink `build/host` -> `build/$HOST_TRIPLE`
(as appropriate per target)
This allows us to use a consistent path in the documentation, without having to worry about which platform people are using.
Add batch flag to remote-test-server
When using this flag, the stdout and stderr are sent in a single batch instead of being streamed. It also used `Command::output` instead of `Command::spawn`. This is useful for targets that might support std but not threading (Eg: UEFI).
Signed-off-by: Ayush Singh <ayushsingh1325@gmail.com>
The lint "clippy::uninlined_format_args" recommends inline
variables in format strings. Fix two places in the docs that do
not do this. I noticed this because I copy/pasted one example in
to my project, then noticed this lint error. This fixes:
error: variables can be used directly in the `format!` string
--> src/main.rs:30:22
|
30 | let string = format!("{:.*}", decimals, magnitude);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
error: variables can be used directly in the `format!` string
--> src/main.rs:39:2
|
39 | write!(&mut io::stdout(), "{}", args).unwrap();
Don't copy symbols from dylibs with `-Zdylib-lto`
When `rustc_driver` started being built with `-Zdylib-lto -Clto=thin`, some libstd symbols were copied by the LTO process into the dylib. That causes duplicate local symbols that are not present otherwise.
Depending on the situation (lib loading order apparently), the duplicated symbols could cause issues: `rustc_driver` overrode the panic hook, but it didn't apply to rustc main's hook (the default from libstd). This is the cause of #105637, in some situations the panic hook installed by `rustc_driver` isn't executed, and only libstd's backtrace is shown (and a double panic). The query stack, as well as the various notes to open a GH about the ICE, don't appear.
It's not clear exactly what is needed to trigger the issue, but I have simulated a reproducer [here](https://github.com/lqd/issue-105637) with cargo involved, the incorrect panic hook is executed on my machine. It is hard to reproduce in a unit test: `cargo run` + `rustup` involves LD_LIBRARY_PATH, which is not the case for `compiletest`. cargo also adds unconditional flags that are then overridden in [`bootstrap` when building rustc with `rust.lto = thin`](9c07efe84f/src/bootstrap/compile.rs (L702-L714)) as done on CI).
All this to say the compilation and execution environment in `bootstrap` leading to the bug building `rustc_driver` is different from our UI tests, and I believe one of the reasons it's hard to make an exact reproducer test. Thankfully there's _still_ a difference in the behavior though: although in the unit test the correct panic hook seems to be executed compared to my repro and the current nightly, only the fix removes the double panic here.
The `7e8277aefa12f1469fb1df01418ff5846a7854a9` `try` build:
- fixes the reproducer repo linked above
- restores the ICE messages from https://github.com/rust-lang/rust/issues/105321 back to the state in its OP compared to the description in https://github.com/rust-lang/rust/issues/105637
- restores the ICE message and the query stack from https://github.com/rust-lang/rust/issues/105777 compared to nightly
While I believe this technically fixes the P-critical issue https://github.com/rust-lang/rust/issues/105637, I would not want to close it yet as we may want to backport to beta/stable (if a point release happens, it would fix the ICEs reported on 1.66.0, which is built with ThinLTO on linux). Once this PR lands, I'll also open another PR to re-enable ThinLTO on x64 darwin's dist builder.
Rustup
r? `@ghost`
I'm on the train and my internet is too bad to download the necessary toolchain, so I have to use CI to find sync fallout.
changelog: none
<!-- changelog_checked -->
fix: not suggest seek_to_start_instead_of_rewind when expr is used
changelog: [`seek_to_start_instead_of_rewind`]: No longer lints, if the return of `seek` is used.
[#10096](https://github.com/rust-lang/rust-clippy/pull/10096)
<!-- changelog_checked -->
Fixes#10065
