coverage: Store coverage source regions as `Span` until codegen (take 2)
This is an attempt to re-land #133418:
> Historically, coverage spans were converted into line/column coordinates during the MIR instrumentation pass.
> This PR moves that conversion step into codegen, so that coverage spans spend most of their time stored as Span instead.
> In addition to being conceptually nicer, this also reduces the size of coverage mappings in MIR, because Span is smaller than 4x u32.
That PR was reverted by #133608, because in some circumstances not covered by our test suite we were emitting coverage metadata that was causing `llvm-cov` to exit with an error (#133606).
---
The implementation here is *mostly* the same, but adapted for subsequent changes in the relevant code (e.g. #134163).
I believe that the changes in #134163 should be sufficient to prevent the problem that required the original PR to be reverted. But I haven't been able to reproduce the original breakage in a regression test, and the `llvm-cov` error message is extremely unhelpful, so I can't completely rule out the possibility of this breaking again.
r? jieyouxu (reviewer of the original PR)
Variants::Single: do not use invalid VariantIdx for uninhabited enums
~~Stacked on top of https://github.com/rust-lang/rust/pull/133681, only the last commit is new.~~
Currently, `Variants::Single` for an empty enum contains a `VariantIdx` of 0; looking that up in the enum variant list will ICE. That's quite confusing. So let's fix that by adding a new `Variants::Empty` case for types that have 0 variants.
try-job: i686-msvc
`rustc_span::symbol` defines some things that are re-exported from
`rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some
closely related things such as `Ident` and `kw`. So you can do `use
rustc_span::{Symbol, sym}` but you have to do `use
rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good
reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`,
and changes many `rustc_span::symbol::` qualifiers in `compiler/` to
`rustc_span::`. This is a 200+ net line of code reduction, mostly
because many files with two `use rustc_span` items can be reduced to
one.
Bounds-check with PtrMetadata instead of Len in MIR
Rather than emitting `Len(*_n)` in array index bounds checks, emit `PtrMetadata(copy _n)` instead -- with some asterisks for arrays and `&mut` that need it to be done slightly differently.
We're getting pretty close to removing `Len` entirely, actually. I think just one more PR after this (for slice drop shims).
r? mir
We don't need `NonNull::as_ptr` debuginfo
In order to stop pessimizing the use of local variables in core, skip debug info for MIR temporaries in tiny (single-BB) functions.
For functions as simple as this -- `Pin::new`, etc -- nobody every actually wants debuginfo for them in the first place. They're more like intrinsics than real functions, and stepping over them is good.
Stop pessimizing the use of local variables in core by skipping debug info for MIR temporaries in tiny (single-BB) functions.
For functions as simple as this -- `Pin::new`, etc -- nobody every actually wants debuginfo for them in the first place. They're more like intrinsics than real functions, and stepping over them is good.
coverage: Use a query to find counters/expressions that must be zero
As of #133446, this query (`coverage_ids_info`) determines which counter/expression IDs are unused. So with only a little extra work, we can take the code that was using that information to determine which coverage counters/expressions must be zero, and move that inside the query as well.
There should be no change in compiler output.
coverage: Prefer to visit nodes whose predecessors have been visited
In coverage instrumentation, we need to traverse the control-flow graph and decide what kind of counter (physical counter or counter-expression) should be used for each node that needs a counter.
The existing traversal order is complex and hard to tweak. This new traversal order tries to be a bit more principled, by always preferring to visit nodes whose predecessors have already been visited, which is a good match for how the counter-creation code ends up dealing with a node's in-edges and out-edges.
For several of the coverage tests, this ends up being a strict improvement in reducing the size of the coverage metadata, and also reducing the number of physical counters needed.
(The new traversal should hopefully also allow some further code simplifications in the future.)
---
This is made possible by the separate simplification pass introduced by #133849. Without that, almost any change to the traversal order ends up increasing the size of the expression table or the number of physical counters.
The words "before" and "after" have an obvious temporal meaning, e.g.
`seek_before_primary_effect`,
`visit_statement_{before,after}_primary_effect`. But "before" is also
used to name the effect that occurs before the primary effect of a
statement/terminator; this is `Effect::Before`. This leads to the
confusing possibility of talking about things happening "before/after
the before event".
This commit removes this awkward overloading of "before" by renaming
`Effect::Before` as `Effect::Early`. It also renames some of the
`Analysis` and `ResultsVisitor` methods to be more consistent.
Here are the before and after names:
- `Effect::{Before,Primary}` -> `Effect::{Early,Primary}`
- `apply_before_statement_effect` -> `apply_early_statement_effect`
- `apply_statement_effect` -> `apply_primary_statement_effect`
- `visit_statement_before_primary_effect` -> `visit_after_early_statement_effect`
- `visit_statement_after_primary_effect` -> `visit_after_primary_statement_effect`
(And s/statement/terminator/ for all the terminator events.)
It uses `MaybeInitializedPlaces` and `MaybeUninitializedPlaces`, but
calls the results `live` and `dead`. This is very confusing given that
there are also analyses called `MaybeLiveLocals` and `MaybeStorageLive`
and `MaybeStorageDead`.
This commit changes it to use `maybe_init` and `maybe_uninit`.
Introduce `MixedBitSet`
`ChunkedBitSet` is good at avoiding excessive memory usage for programs with very large functgions where dataflow bitsets have very large domain sizes. But it's overly heavyweight for small bitsets, because any non-empty `ChunkedBitSet` takes up at least 256 bytes.
This PR introduces `MixedBitSet`, which is a simple bitset that uses `BitSet` for small/medium bitsets and `ChunkedBitSet` for large bitsets. It's a speed and memory usage win.
r? `@Mark-Simulacrum`
This query (`coverage_ids_info`) already determines which counter/expression
IDs are unused, so it only takes a little extra effort to also determine which
counters/expressions must have a value of zero.
It's a performance win because `MixedBitSet` is faster and uses less
memory than `ChunkedBitSet`.
Also reflow some overlong comment lines in
`lint_tail_expr_drop_order.rs`.
remove `Ty::is_copy_modulo_regions`
Using these functions is likely incorrect if an `InferCtxt` is available, I moved this function to `TyCtxt` (and added it to `LateContext`) and added a note to the documentation that one should prefer `Infer::type_is_copy_modulo_regions` instead.
I didn't yet move `is_sized` and `is_freeze`, though I think we should move these as well.
r? `@compiler-errors` cc #132279
The `Borrowed` variant is no longer used. This commit removes it, along
with the `as_results_cursor` method that produces it, and renames
`as_results_cursor_mut` as `as_results_cursor`.
coverage: Store coverage source regions as `Span` until codegen
Historically, coverage spans were converted into line/column coordinates during the MIR instrumentation pass.
This PR moves that conversion step into codegen, so that coverage spans spend most of their time stored as `Span` instead.
In addition to being conceptually nicer, this also reduces the size of coverage mappings in MIR, because `Span` is smaller than 4x u32.
---
There should be no changes to coverage output.
Remove -Zfuel.
I'm not sure this feature is used. I only found 2 references in a google search, both referring to its introduction.
Meanwhile, it's a global mutable state, untracked by incremental compilation, so incompatible with it.
