dont provide fwd declared params to cg defaults
Fixes#83938
```rust
#![feature(const_evaluatable_checked, const_generics, const_generics_defaults)]
#![allow(incomplete_features)]
pub struct Bar<const N: usize, const M: usize = { N + 1 }>;
pub fn foo<const N1: usize>() -> Bar<N1> { loop {} }
fn main() {}
```
This PR makes this code no longer ICE, it was ICE'ing previously because when building substs for `Bar<N1>` we would subst the anon ct: `ConstKind::Unevaluated({N + 1}, substs: [N, M])` with substs of `[N1]`. the anon const has forward declared params supplied though so we end up trying to substitute the provided `M` param which causes the ICE.
This PR doesn't handle the predicates of the const so
```rust
trait Foo<const N: usize> { const Assoc: usize; }
pub struct Bar<const N: usize = { <()>::Assoc }> where (): Foo<N>;
```
Resolves to `<() as Foo<N>>::Assoc` which can allow for using fwd declared params indirectly.
```rust
trait Foo<const N: usize> {}
struct Bar<const N: usize = { 2 + 3 }> where (): Foo<N>;
```
This code also ICEs under this PR because instantiating the default's predicates causes an ICE as predicates_of contains predicates with fwd declared params
PR was briefly discussed [in this zulip thread](https://rust-lang.zulipchat.com/#narrow/stream/260443-project-const-generics/topic/evil.20preds.20in.20param.20env.20.2386580)
Add support for powerpc-unknown-freebsd
- A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
For all Rust targets on FreeBSD, it's rust@FreeBSD.org.
- Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
Done.
- Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
Done
- Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
Done.
- The target must not introduce license incompatibilities.
Done.
- Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Fine with me.
- The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
Done.
- If the target supports building host tools (such as rustc or cargo), those host tools must not depend on proprietary (non-FOSS) libraries, other than ordinary runtime libraries supplied by the platform and commonly used by other binaries built for the target. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
Done.
- Targets should not require proprietary (non-FOSS) components to link a functional binary or library.
Done.
- "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
Fine with me.
- Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
Ok.
- This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
Ok.
- Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
std is implemented.
- The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running tests (even if they do not pass), the documentation must explain how to run tests for the target, using emulation if possible or dedicated hardware if necessary.
Hm, building is possible the same way as other Rust on FreeBSD targets.
- Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
Ok.
- Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
Ok.
- Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
Ok.
- In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
Ok.
Remove detection of rustup and cargo in 'missing extern crate' diagnostics
Previously, this would change the test output when RUSTUP_HOME was set:
```
---- [ui] ui/issues/issue-49851/compiler-builtins-error.rs stdout ----
diff of stderr:
1 error[E0463]: can't find crate for `core`
2 |
3 = note: the `thumbv7em-none-eabihf` target may not be installed
+ = help: consider downloading the target with `rustup target add thumbv7em-none-eabihf`
4
5 error: aborting due to previous error
6
```
Originally, I fixed it by explicitly unsetting RUSTUP_HOME in
compiletest. Then I realized that almost no one has RUSTUP_HOME set,
since rustup doesn't set it itself. It does set RUST_RECURSION_COUNT
whenever it launches a proxy, though - use that instead.
r? ```@estebank``` cc ```@petrochenkov``` ```@kinnison```
Fix span when suggesting to add an associated type bound
Fixes#87261
Note that this fix is not perfect, it ~~will still give incorrect~~ won't give suggestions in some situations:
- If the associated type is defined on a supertrait of those contained in the opaque type, it will fallback to the previous behaviour, e.g. if `AssocTy` is defined on the trait `Foo`, `Bar` has `Foo` as supertrait and the opaque type is a `impl Bar + Baz`.
- If the the associated type is defined on a generic trait and the opaque type includes two versions of that generic trait, e.g. the opaque type is `impl Foo<A> + Foo<B>`
Currently, we parse macros at the end of a block
(e.g. `fn foo() { my_macro!() }`) as expressions, rather than
statements. This means that a macro invoked in this position
cannot expand to items or semicolon-terminated expressions.
In the future, we might want to start parsing these kinds of macros
as statements. This would make expansion more 'token-based'
(i.e. macro expansion behaves (almost) as if you just textually
replaced the macro invocation with its output). However,
this is a breaking change (see PR #78991), so it will require
further discussion.
Since the current behavior will not be changing any time soon,
we need to address the interaction with the
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` lint. Since we are parsing
the result of macro expansion as an expression, we will emit a lint
if there's a trailing semicolon in the macro output. However, this
results in a somewhat confusing message for users, since it visually
looks like there should be no problem with having a semicolon
at the end of a block
(e.g. `fn foo() { my_macro!() }` => `fn foo() { produced_expr; }`)
To help reduce confusion, this commit adds a note explaining
that the macro is being interpreted as an expression. Additionally,
we suggest adding a semicolon after the macro *invocation* - this
will cause us to parse the macro call as a statement. We do *not*
use a structured suggestion for this, since the user may actually
want to remove the semicolon from the macro definition (allowing
the block to evaluate to the expression produced by the macro).
Warn on inert attributes used on bang macro invocation
These attributes are currently discarded.
This may change in the future (see #63221), but for now,
placing inert attributes on a macro invocation does nothing,
so we should warn users about it.
Technically, it's possible for there to be attribute macro
on the same macro invocation (or at a higher scope), which
inspects the inert attribute. For example:
```rust
#[look_for_inline_attr]
#[inline]
my_macro!()
#[look_for_nested_inline]
mod foo { #[inline] my_macro!() }
```
However, this would be a very strange thing to do.
Anyone running into this can manually suppress the warning.
Refactor vtable format for upcoming trait_upcasting feature.
This modifies vtable format:
1. reordering occurrence order of methods coming from different traits
2. include `VPtr`s for supertraits where this vtable cannot be directly reused during trait upcasting.
Also, during codegen, the vtables corresponding to these newly included `VPtr` will be requested and generated.
For the cases where this vtable can directly used, now the super trait vtable has exactly the same content to some prefix of this one.
r? `@bjorn3`
cc `@RalfJung`
cc `@rust-lang/wg-traits`
Simplify the collecting of `? Trait` bounds in where clause
This PR fixes the FIXME about using less rightward drift and only one error reporting when collecting of `?Trait` bounds in where clause.
Checking whether the path length of `bound_ty` is 1 can be replaced by whether `unresolved_segments` in the partial_res is 0.
Checking whether the `param.kind` is `Type{...}` can also be omitted. One Fx hash calculation will be done for Const or Lifetime param, but the impact on efficiency should be small IMO
Previously, this would change the test output when RUSTUP_HOME was set:
```
---- [ui] ui/issues/issue-49851/compiler-builtins-error.rs stdout ----
diff of stderr:
1 error[E0463]: can't find crate for `core`
2 |
3 = note: the `thumbv7em-none-eabihf` target may not be installed
+ = help: consider downloading the target with `rustup target add thumbv7em-none-eabihf`
4
5 error: aborting due to previous error
6
```
Originally, I fixed it by explicitly unsetting RUSTUP_HOME in
compiletest. Then I realized that almost no one has RUSTUP_HOME set,
since rustup doesn't set it itself; although it does set RUST_RECURSION_COUNT
whenever it launches a proxy. Then it was pointed out that this runtime
check doesn't really make sense and it's fine to make it unconditional.
fix: clarify suggestion that `&T` must refer to `T: Sync` for `&T: Send`
### Description
- [x] fix#86507
- [x] add UI test for relevant code from issue
- [x] change `rustc_trait_selection/src/traits/error_reporting/suggestions.rs` to include a more clear suggestion when `&T` fails to satisfy `Send` bounds due to the fact that `T` fails to implement `Sync`
- [x] update UI test in Clippy: `src/tools/tests/ui/future_not_send.stderr`
Make mir borrowck's use of opaque types independent of the typeck query's result
fixes#87218fixes#86465
we used to use the typeck results only to generate an obligation for the mir borrowck type to be equal to the typeck result.
When i removed the `fixup_opaque_types` function in #87200, I exposed a bug that showed that mir borrowck can't doesn't get enough information from typeck in order to build the correct lifetime mapping from opaque type usage to the actual concrete type. We therefor now fully compute the information within mir borrowck (we already did that, but we only used it to verify the typeck result) and stop using the typeck information.
We will likely be able to remove most opaque type information from the borrowck results in the future and just have all current callers use the mir borrowck result instead.
r? `@spastorino`
add test for issue 86507
add stderr for issue 86507
update issue-86507 UI test
add comment for the expected error in UI test file
add proper 'refers to <ref_type>' in suggestion
update diagnostic phrasing; update test to match new phrasing; re-organize logic for checking T: Sync
evaluate additional obligation to figure out if T is Sync
run './x.py test tidy --bless'
incorporate changes from review; reorganize logic for readability
Revert PR 81473 to resolve (on mainline) issues 81626 and 81658.
This is a nightly-targetted variant of PR #83171
The intent is to just address issue #81658 on all release channels, rather that keep repeatedly reverting PR #83171 on beta.
However, our intent is *also* to reland PR #83171 after we have addressed issue #81658 , most likely by coupling the re-landing of PR #83171 with an enhancement like PR #83004
Allow combining -Cprofile-generate and -Cpanic=unwind when targeting MSVC.
The LLVM limitation that previously prevented this has been fixed in LLVM 9 which is older than the oldest LLVM version we currently support.
Fixes https://github.com/rust-lang/rust/issues/61002.
r? ``@nagisa`` (or anyone else from ``@rust-lang/wg-llvm)``
Profile incremental compilation hashing fingerprints
Adds profiling instrumentation for the hashing of incremental compilation fingerprints per query.
This will eventually feed into the `measureme` and `rustc-perf` infrastructure for tracking if computing hashes changes over time.
TODOs:
* [x] Address the FIXME where we are including node interning in the hash timing.
* [ ] Update measureme/summarize to handle this new data: https://github.com/rust-lang/measureme/pull/166
* [ ] ~Update rustc-perf to handle the new data from measureme~ (will be done at a later time)
r? `@ghost`
cc `@michaelwoerister`
Support HIR wf checking for function signatures
During function type-checking, we normalize any associated types in
the function signature (argument types + return type), and then
create WF obligations for each of the normalized types. The HIR wf code
does not currently support this case, so any errors that we get have
imprecise spans.
This commit extends `ObligationCauseCode::WellFormed` to support
recording a function parameter, allowing us to get the corresponding
HIR type if an error occurs. Function typechecking is modified to
pass this information during signature normalization and WF checking.
The resulting code is fairly verbose, due to the fact that we can
no longer normalize the entire signature with a single function call.
As part of the refactoring, we now perform HIR-based WF checking
for several other 'typed items' (statics, consts, and inherent impls).
As a result, WF and projection errors in a function signature now
have a precise span, which points directly at the responsible type.
If a function signature is constructed via a macro, this will allow
the error message to point at the code 'most responsible' for the error
(e.g. a user-supplied macro argument).
Fix implicit Sized relaxation when attempting to relax other, unsupported trait
Fixes#87199.
Do note that this bug fix causes code like the `ref_arg::<[i32]>(&[5]);` line in the test case in combination with an affected function to no longer compile.
When pretty printing, name placeholders as bound regions
Split from #85499
When we see a placeholder that we are going to print, treat it as a bound var (and add it to a `for<...>`
Previously, we would 'forget' that we had `'static` regions in some
place during trait evaluation. This lead to us producing
`EvaluatedToOkModuloRegions` when we could have produced
`EvaluatedToOk`, causing us to perform unnecessary work.
This PR preserves `'static` regions when we canonicalize a predicate for
`evaluate_obligation`, and when we 'freshen' a predicate during trait
evaluation. Thie ensures that evaluating a predicate containing
`'static` regions can produce `EvaluatedToOk` (assuming that we
don't end up introducing any region dependencies during evaluation).
Building off of this improved caching, we use
`predicate_must_hold_considering_regions` during fulfillment of
projection predicates to see if we can skip performing additional work.
We already do this for trait predicates, but doing this for projection
predicates lead to mixed performance results without the above caching
improvements.
Rename force-warns to force-warn
The renames the `--force-warns` option to `--force-warn`. This mirrors other lint options like `--warn` and `--deny` which are in the singular.
r? `@nikomatsakis`
cc `@ehuss` - this option is being used by Cargo. How do we make sure the transition to using the new name is as smooth as possible?
Get back the more precise suggestion spans of old regionck
I noticed that when you turn on nll, the structured suggestion replaces a snippet instead of appending a snippet. It seems clearer to the user to only highlight the newly added characters instead of the entire `impl Trait` (and old regionck already does it this way).
r? ``@estebank``
avoid temporary vectors/reuse iterators
Avoid collecting an interator just to re-iterate immediately.
Rather reuse the previous iterator. (clippy::needless_collect)
During function type-checking, we normalize any associated types in
the function signature (argument types + return type), and then
create WF obligations for each of the normalized types. The HIR wf code
does not currently support this case, so any errors that we get have
imprecise spans.
This commit extends `ObligationCauseCode::WellFormed` to support
recording a function parameter, allowing us to get the corresponding
HIR type if an error occurs. Function typechecking is modified to
pass this information during signature normalization and WF checking.
The resulting code is fairly verbose, due to the fact that we can
no longer normalize the entire signature with a single function call.
As part of the refactoring, we now perform HIR-based WF checking
for several other 'typed items' (statics, consts, and inherent impls).
As a result, WF and projection errors in a function signature now
have a precise span, which points directly at the responsible type.
If a function signature is constructed via a macro, this will allow
the error message to point at the code 'most responsible' for the error
(e.g. a user-supplied macro argument).
Better diagnostics with mismatched types due to implicit static lifetime
Fixes#78113
I think this is my first diagnostics PR...definitely happy to hear thoughts on the direction/implementation here.
I was originally just trying to solve the error above, where the lifetime on a GAT was causing a cryptic "mismatched types" error. But as I was writing this, I realized that this (unintentionally) also applied to a different case: `wf-in-foreign-fn-decls-issue-80468.rs`. I'm not sure if this diagnostic should get a new error code, or even reuse an existing one. And, there might be some ways to make this even more generalized. Also, the error is a bit more lengthy and verbose than probably needed. So thoughts there are welcome too.
This PR essentially ended up adding a new nice region error pass that triggers if a type doesn't match the self type of an impl which is selected because of a predicate because of an implicit static bound on that self type.
r? `@estebank`
MSVC.
The LLVM limitation that previously prevented this has been fixed in LLVM
9 which is older than the oldest LLVM version we currently support.
See https://github.com/rust-lang/rust/issues/61002.
Remove special case for `ExprKind::Paren` in `MutVisitor`
The special case breaks several useful invariants (`ExpnId`s are
globally unique, and never change). This special case
was added back in 2016 in https://github.com/rust-lang/rust/pull/34355
r? `@petrochenkov`
These attributes are currently discarded.
This may change in the future (see #63221), but for now,
placing inert attributes on a macro invocation does nothing,
so we should warn users about it.
Technically, it's possible for there to be attribute macro
on the same macro invocation (or at a higher scope), which
inspects the inert attribute. For example:
```rust
#[look_for_inline_attr]
#[inline]
my_macro!()
#[look_for_nested_inline]
mod foo { #[inline] my_macro!() }
```
However, this would be a very strange thing to do.
Anyone running into this can manually suppress the warning.
The special case breaks several useful invariants (`ExpnId`s are
globally unique, and never change). This special case
was added back in 2016 in https://github.com/rust-lang/rust/pull/34355
[debuginfo] Emit associated type bindings in trait object type names.
This PR updates debuginfo type name generation for trait objects to include associated type bindings and auto trait bounds -- so that, for example, the debuginfo type name of `&dyn Iterator<Item=Foo>` and `&dyn Iterator<Item=Bar>` don't both map to just `&dyn Iterator` anymore.
The following table shows examples of debuginfo type names before and after the PR:
| type | before | after |
|------|---------|-------|
| `&dyn Iterator<Item=u32>>` | `&dyn Iterator` | `&dyn Iterator<Item=u32>` |
| `&(dyn Iterator<Item=u32>> + Sync)` | `&dyn Iterator` | `&(dyn Iterator<Item=u32> + Sync)` |
| `&(dyn SomeTrait<bool, i8, Bar=u32>> + Send)` | `&dyn SomeTrait<bool, i8>` | `&(dyn SomeTrait<bool, i8, Bar=u32>> + Send)` |
For targets that need C++-like type names, we use `assoc$<Item,u32>` instead of `Item=u32`:
| type | before | after |
|------|---------|-------|
| `&dyn Iterator<Item=u32>>` | `ref$<dyn$<Iterator> >` | `ref$<dyn$<Iterator<assoc$<Item,u32> > > >` |
| `&(dyn Iterator<Item=u32>> + Sync)` | `ref$<dyn$<Iterator> >` | `ref$<dyn$<Iterator<assoc$<Item,u32> >,Sync> >` |
| `&(dyn SomeTrait<bool, i8, Bar=u32>> + Send)` | `ref$<dyn$<SomeTrait<bool, i8> > >` | `ref$<dyn$<SomeTrait<bool,i8,assoc$<Bar,u32> > >,Send> >` |
The PR also adds self-profiling measurements for debuginfo type name generation (re. https://github.com/rust-lang/rust/issues/86431). It looks like the compiler spends up to 0.5% of its time in that task, so the potential for optimizing it via caching seems limited.
However, the perf run also shows [the biggest regression](https://perf.rust-lang.org/detailed-query.html?commit=585e91c718b0b2c5319e1fffd0ff1e62aaf7ccc2&base_commit=b9197978a90be6f7570741eabe2da175fec75375&benchmark=tokio-webpush-simple-debug&run_name=incr-unchanged) in a test case that does not even invoke the code in question. This suggests that the length of the names we generate here can affect performance by influencing how much data the linker has to copy around.
Fixes https://github.com/rust-lang/rust/issues/86134.
Various diagnostics clean ups/tweaks
* Always point at macros, including derive macros
* Point at non-local items that introduce a trait requirement
* On private associated item, point at definition
* Always point at macros, including derive macros
* Point at non-local items that introduce a trait requirement
* On private associated item, point at definition
Make `--force-warns` a normal lint level option
Now that `ForceWarn` is a lint level, there's no reason `--force-warns` should be treated differently from other options that set lint levels. This merges the `ForceWarn` handling in with the other lint level command line options. It also unifies all of the relevant selection logic in `compiler/rustc_lint/src/levels.rs`, rather than having some of it weirdly elsewhere.
Fixes#86958, which arose from the special-cased handling of `ForceWarn` having had an error in it.
Don't create references to uninitialized data in `List::from_arena`
Previously `result` and `arena_slice` were references pointing to uninitialized data, which is technically UB. They may have been fine because the pointed data is `Copy` and and they were only written to, but the semantics of this aren't clearly defined yet, and since we have a sound way to do the same thing I don't think we should keep the possibly-unsound way.
Compute a better `lint_node_id` during expansion
When we need to emit a lint at a macro invocation, we currently use the
`NodeId` of its parent definition (e.g. the enclosing function). This
means that any `#[allow]` / `#[deny]` attributes placed 'closer' to the
macro (e.g. on an enclosing block or statement) will have no effect.
This commit computes a better `lint_node_id` in `InvocationCollector`.
When we visit/flat_map an AST node, we assign it a `NodeId` (earlier
than we normally would), and store than `NodeId` in current
`ExpansionData`. When we collect a macro invocation, the current
`lint_node_id` gets cloned along with our `ExpansionData`, allowing it
to be used if we need to emit a lint later on.
This improves the handling of `#[allow]` / `#[deny]` for
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` and some `asm!`-related lints.
The 'legacy derive helpers' lint retains its current behavior
(I've inlined the now-removed `lint_node_id` function), since
there isn't an `ExpansionData` readily available.
feat(rustc_lint): add `dyn_drop`
Based on the conversation in #86747.
Explanation
-----------
A trait object bound of the form `dyn Drop` is most likely misleading and not what the programmer intended.
`Drop` bounds do not actually indicate whether a type can be trivially dropped or not, because a composite type containing `Drop` types does not necessarily implement `Drop` itself. Naïvely, one might be tempted to write a deferred drop system, to pull cleaning up memory out of a latency-sensitive code path, using `dyn Drop` trait objects. However, this breaks down e.g. when `T` is `String`, which does not implement `Drop`, but should probably be accepted.
To write a trait object bound that accepts anything, use a placeholder trait with a blanket implementation.
```rust
trait Placeholder {}
impl<T> Placeholder for T {}
fn foo(_x: Box<dyn Placeholder>) {}
```
Don't use gc-sections with profile-generate.
When building with profile-generate don't call gc_sections as this can
can sometimes strip out profile data. This missing information in the
prof files can then result in missing functions when using the profile
information.
#78226
r? `@Mark-Simulacrum`
Use existing declaration of rust_eh_personality
If crate declares `rust_eh_personality`, re-use existing declaration
as otherwise attempts to set function attributes that follow the
declaration will fail (unless it happens to have exactly the same
type signature as the one predefined in the compiler).
Fixes#70117.
Fixes https://github.com/rust-lang/rust/pull/81469#issuecomment-809428126; probably.
Based on the conversation in #86747.
Explanation
-----------
A trait object bound of the form `dyn Drop` is most likely misleading
and not what the programmer intended.
`Drop` bounds do not actually indicate whether a type can be trivially
dropped or not, because a composite type containing `Drop` types does
not necessarily implement `Drop` itself. Naïvely, one might be tempted
to write a deferred drop system, to pull cleaning up memory out of a
latency-sensitive code path, using `dyn Drop` trait objects. However,
this breaks down e.g. when `T` is `String`, which does not implement
`Drop`, but should probably be accepted.
To write a trait object bound that accepts anything, use a placeholder
trait with a blanket implementation.
```rust
trait Placeholder {}
impl<T> Placeholder for T {}
fn foo(_x: Box<dyn Placeholder>) {}
```
Add diagnostics for mistyped inclusive range
Inclusive ranges are correctly typed as `..=`. However, it's quite easy to think of it as being like `==`, and type `..==` instead. This PR adds helpful diagnostics for this case.
Resolves#86395 (there are some other cases there, but I think those should probably have separate issues).
r? `@estebank`
Add diagnostic items for Clippy
This adds a bunch of diagnostic items to `std`/`core`/`alloc` functions, structs and traits used in Clippy. The actual refactorings in Clippy to use these items will be done in a different PR in Clippy after the next sync.
This PR doesn't include all paths Clippy uses, I've only gone through the first 85 lines of Clippy's [`paths.rs`](ecf85f4bdc/clippy_utils/src/paths.rs) (after rust-lang/rust-clippy#7466) to get some feedback early on. I've also decided against adding diagnostic items to methods, as it would be nicer and more scalable to access them in a nicer fashion, like adding a `is_diagnostic_assoc_item(did, sym::Iterator, sym::map)` function or something similar (Suggested by `@camsteffen` [on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/147480-t-compiler.2Fwg-diagnostics/topic/Diagnostic.20Item.20Naming.20Convention.3F/near/225024603))
There seems to be some different naming conventions when it comes to diagnostic items, some use UpperCamelCase (`BinaryHeap`) and some snake_case (`hashmap_type`). This PR uses UpperCamelCase for structs and traits and snake_case with the module name as a prefix for functions. Any feedback on is this welcome.
cc: rust-lang/rust-clippy#5393
r? `@Manishearth`
Remove nondeterminism in multiple-definitions test
Compare all fields in `DllImport` when sorting to avoid nondeterminism in the error for multiple inconsistent definitions of an extern function. Restore the multiple-definitions test.
Resolves#87084.
Check that const parameters of trait methods have compatible types
This PR fixes#86820. The problem is that this currently passes the type checker:
```rust
trait Tr {
fn foo<const N: u8>(self) -> u8;
}
impl Tr for f32 {
fn foo<const N: bool>(self) -> u8 { 42 }
}
```
i.e. the type checker fails to check whether const parameters in `impl` methods have the same type as the corresponding declaration in the trait. With my changes, I get, for the above code:
```
error[E0053]: method `foo` has an incompatible const parameter type for trait
--> test.rs:6:18
|
6 | fn foo<const N: bool>(self) -> u8 { 42 }
| ^
|
note: the const parameter `N` has type `bool`, but the declaration in trait `Tr::foo` has type `u8`
--> test.rs:2:18
|
2 | fn foo<const N: u8>(self) -> u8;
| ^
error: aborting due to previous error
```
This fixes#86820, where an ICE happens later on because the trait method is declared with a const parameter of type `u8`, but the `impl` uses one of type `usize`:
> `expected int of size 8, but got size 1`
When we need to emit a lint at a macro invocation, we currently use the
`NodeId` of its parent definition (e.g. the enclosing function). This
means that any `#[allow]` / `#[deny]` attributes placed 'closer' to the
macro (e.g. on an enclosing block or statement) will have no effect.
This commit computes a better `lint_node_id` in `InvocationCollector`.
When we visit/flat_map an AST node, we assign it a `NodeId` (earlier
than we normally would), and store than `NodeId` in current
`ExpansionData`. When we collect a macro invocation, the current
`lint_node_id` gets cloned along with our `ExpansionData`, allowing it
to be used if we need to emit a lint later on.
This improves the handling of `#[allow]` / `#[deny]` for
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` and some `asm!`-related lints.
The 'legacy derive helpers' lint retains its current behavior
(I've inlined the now-removed `lint_node_id` function), since
there isn't an `ExpansionData` readily available.
Some perf optimizations and logging
Various bits of (potential) perf optimizations and some logging additions/changes pulled out from #85499
The only not extremely straightforward change is adding `needs_normalization` in `trait::project`. This is just a perf optimization to avoid fold through a type with *only* opaque types in `UserFacing` mode (as they aren't replaced).
This should be a simple PR for *anyone* to review, so I'm going to let highfive assign. But I'll go ahead and cc `@nikomatsakis` in case he has time today.
Make expansions stable for incr. comp.
This PR aims to make expansions stable for incr. comp. by using the same architecture as definitions:
- the interned identifier `ExpnId` contains a `CrateNum` and a crate-local id;
- bidirectional maps `ExpnHash <-> ExpnId` are setup;
- incr. comp. on-disk cache saves and reconstructs expansions using their `ExpnHash`.
I tried to use as many `LocalExpnId` as I could in the resolver code, but I may have missed a few opportunities.
All this will allow to use an `ExpnId` as a query key, and to force this query without recomputing caller queries. For instance, this will be used to implement #85999.
r? `@petrochenkov`
CTFE/Miri engine Pointer type overhaul
This fixes the long-standing problem that we are using `Scalar` as a type to represent pointers that might be integer values (since they point to a ZST). The main problem is that with int-to-ptr casts, there are multiple ways to represent the same pointer as a `Scalar` and it is unclear if "normalization" (i.e., the cast) already happened or not. This leads to ugly methods like `force_mplace_ptr` and `force_op_ptr`.
Another problem this solves is that in Miri, it would make a lot more sense to have the `Pointer::offset` field represent the full absolute address (instead of being relative to the `AllocId`). This means we can do ptr-to-int casts without access to any machine state, and it means that the overflow checks on pointer arithmetic are (finally!) accurate.
To solve this, the `Pointer` type is made entirely parametric over the provenance, so that we can use `Pointer<AllocId>` inside `Scalar` but use `Pointer<Option<AllocId>>` when accessing memory (where `None` represents the case that we could not figure out an `AllocId`; in that case the `offset` is an absolute address). Moreover, the `Provenance` trait determines if a pointer with a given provenance can be cast to an integer by simply dropping the provenance.
I hope this can be read commit-by-commit, but the first commit does the bulk of the work. It introduces some FIXMEs that are resolved later.
Fixes https://github.com/rust-lang/miri/issues/841
Miri PR: https://github.com/rust-lang/miri/pull/1851
r? `@oli-obk`
Update Rust Float-Parsing Algorithms to use the Eisel-Lemire algorithm.
# Summary
Rust, although it implements a correct float parser, has major performance issues in float parsing. Even for common floats, the performance can be 3-10x [slower](https://arxiv.org/pdf/2101.11408.pdf) than external libraries such as [lexical](https://github.com/Alexhuszagh/rust-lexical) and [fast-float-rust](https://github.com/aldanor/fast-float-rust).
Recently, major advances in float-parsing algorithms have been developed by Daniel Lemire, along with others, and implement a fast, performant, and correct float parser, with speeds up to 1200 MiB/s on Apple's M1 architecture for the [canada](0e2b5d163d/data/canada.txt) dataset, 10x faster than Rust's 130 MiB/s.
In addition, [edge-cases](https://github.com/rust-lang/rust/issues/85234) in Rust's [dec2flt](868c702d0c/library/core/src/num/dec2flt) algorithm can lead to over a 1600x slowdown relative to efficient algorithms. This is due to the use of Clinger's correct, but slow [AlgorithmM and Bellepheron](http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.45.4152&rep=rep1&type=pdf), which have been improved by faster big-integer algorithms and the Eisel-Lemire algorithm, respectively.
Finally, this algorithm provides substantial improvements in the number of floats the Rust core library can parse. Denormal floats with a large number of digits cannot be parsed, due to use of the `Big32x40`, which simply does not have enough digits to round a float correctly. Using a custom decimal class, with much simpler logic, we can parse all valid decimal strings of any digit count.
```rust
// Issue in Rust's dec2fly.
"2.47032822920623272088284396434110686182e-324".parse::<f64>(); // Err(ParseFloatError { kind: Invalid })
```
# Solution
This pull request implements the Eisel-Lemire algorithm, modified from [fast-float-rust](https://github.com/aldanor/fast-float-rust) (which is licensed under Apache 2.0/MIT), along with numerous modifications to make it more amenable to inclusion in the Rust core library. The following describes both features in fast-float-rust and improvements in fast-float-rust for inclusion in core.
**Documentation**
Extensive documentation has been added to ensure the code base may be maintained by others, which explains the algorithms as well as various associated constants and routines. For example, two seemingly magical constants include documentation to describe how they were derived as follows:
```rust
// Round-to-even only happens for negative values of q
// when q ≥ −4 in the 64-bit case and when q ≥ −17 in
// the 32-bitcase.
//
// When q ≥ 0,we have that 5^q ≤ 2m+1. In the 64-bit case,we
// have 5^q ≤ 2m+1 ≤ 2^54 or q ≤ 23. In the 32-bit case,we have
// 5^q ≤ 2m+1 ≤ 2^25 or q ≤ 10.
//
// When q < 0, we have w ≥ (2m+1)×5^−q. We must have that w < 2^64
// so (2m+1)×5^−q < 2^64. We have that 2m+1 > 2^53 (64-bit case)
// or 2m+1 > 2^24 (32-bit case). Hence,we must have 2^53×5^−q < 2^64
// (64-bit) and 2^24×5^−q < 2^64 (32-bit). Hence we have 5^−q < 2^11
// or q ≥ −4 (64-bit case) and 5^−q < 2^40 or q ≥ −17 (32-bitcase).
//
// Thus we have that we only need to round ties to even when
// we have that q ∈ [−4,23](in the 64-bit case) or q∈[−17,10]
// (in the 32-bit case). In both cases,the power of five(5^|q|)
// fits in a 64-bit word.
const MIN_EXPONENT_ROUND_TO_EVEN: i32;
const MAX_EXPONENT_ROUND_TO_EVEN: i32;
```
This ensures maintainability of the code base.
**Improvements for Disguised Fast-Path Cases**
The fast path in float parsing algorithms attempts to use native, machine floats to represent both the significant digits and the exponent, which is only possible if both can be exactly represented without rounding. In practice, this means that the significant digits must be 53-bits or less and the then exponent must be in the range `[-22, 22]` (for an f64). This is similar to the existing dec2flt implementation.
However, disguised fast-path cases exist, where there are few significant digits and an exponent above the valid range, such as `1.23e25`. In this case, powers-of-10 may be shifted from the exponent to the significant digits, discussed at length in https://github.com/rust-lang/rust/issues/85198.
**Digit Parsing Improvements**
Typically, integers are parsed from string 1-at-a-time, requiring unnecessary multiplications which can slow down parsing. An approach to parse 8 digits at a time using only 3 multiplications is described in length [here](https://johnnylee-sde.github.io/Fast-numeric-string-to-int/). This leads to significant performance improvements, and is implemented for both big and little-endian systems.
**Unsafe Changes**
Relative to fast-float-rust, this library makes less use of unsafe functionality and clearly documents it. This includes the refactoring and documentation of numerous unsafe methods undesirably marked as safe. The original code would look something like this, which is deceptively marked as safe for unsafe functionality.
```rust
impl AsciiStr {
#[inline]
pub fn step_by(&mut self, n: usize) -> &mut Self {
unsafe { self.ptr = self.ptr.add(n) };
self
}
}
...
#[inline]
fn parse_scientific(s: &mut AsciiStr<'_>) -> i64 {
// the first character is 'e'/'E' and scientific mode is enabled
let start = *s;
s.step();
...
}
```
The new code clearly documents safety concerns, and does not mark unsafe functionality as safe, leading to better safety guarantees.
```rust
impl AsciiStr {
/// Advance the view by n, advancing it in-place to (n..).
pub unsafe fn step_by(&mut self, n: usize) -> &mut Self {
// SAFETY: same as step_by, safe as long n is less than the buffer length
self.ptr = unsafe { self.ptr.add(n) };
self
}
}
...
/// Parse the scientific notation component of a float.
fn parse_scientific(s: &mut AsciiStr<'_>) -> i64 {
let start = *s;
// SAFETY: the first character is 'e'/'E' and scientific mode is enabled
unsafe {
s.step();
}
...
}
```
This allows us to trivially demonstrate the new implementation of dec2flt is safe.
**Inline Annotations Have Been Removed**
In the previous implementation of dec2flt, inline annotations exist practically nowhere in the entire module. Therefore, these annotations have been removed, which mostly does not impact [performance](https://github.com/aldanor/fast-float-rust/issues/15#issuecomment-864485157).
**Fixed Correctness Tests**
Numerous compile errors in `src/etc/test-float-parse` were present, due to deprecation of `time.clock()`, as well as the crate dependencies with `rand`. The tests have therefore been reworked as a [crate](https://github.com/Alexhuszagh/rust/tree/master/src/etc/test-float-parse), and any errors in `runtests.py` have been patched.
**Undefined Behavior**
An implementation of `check_len` which relied on undefined behavior (in fast-float-rust) has been refactored, to ensure that the behavior is well-defined. The original code is as follows:
```rust
#[inline]
pub fn check_len(&self, n: usize) -> bool {
unsafe { self.ptr.add(n) <= self.end }
}
```
And the new implementation is as follows:
```rust
/// Check if the slice at least `n` length.
fn check_len(&self, n: usize) -> bool {
n <= self.as_ref().len()
}
```
Note that this has since been fixed in [fast-float-rust](https://github.com/aldanor/fast-float-rust/pull/29).
**Inferring Binary Exponents**
Rather than explicitly store binary exponents, this new implementation infers them from the decimal exponent, reducing the amount of static storage required. This removes the requirement to store [611 i16s](868c702d0c/library/core/src/num/dec2flt/table.rs (L8)).
# Code Size
The code size, for all optimizations, does not considerably change relative to before for stripped builds, however it is **significantly** smaller prior to stripping the resulting binaries. These binary sizes were calculated on x86_64-unknown-linux-gnu.
**new**
Using rustc version 1.55.0-dev.
opt-level|size|size(stripped)
|:-:|:-:|:-:|
0|400k|300K
1|396k|292K
2|392k|292K
3|392k|296K
s|396k|292K
z|396k|292K
**old**
Using rustc version 1.53.0-nightly.
opt-level|size|size(stripped)
|:-:|:-:|:-:|
0|3.2M|304K
1|3.2M|292K
2|3.1M|284K
3|3.1M|284K
s|3.1M|284K
z|3.1M|284K
# Correctness
The dec2flt implementation passes all of Rust's unittests and comprehensive float parsing tests, along with numerous other tests such as Nigel Toa's comprehensive float [tests](https://github.com/nigeltao/parse-number-fxx-test-data) and Hrvoje Abraham [strtod_tests](https://github.com/ahrvoje/numerics/blob/master/strtod/strtod_tests.toml). Therefore, it is unlikely that this algorithm will incorrectly round parsed floats.
# Issues Addressed
This will fix and close the following issues:
- resolves#85198
- resolves#85214
- resolves#85234
- fixes#31407
- fixes#31109
- fixes#53015
- resolves#68396
- closes https://github.com/aldanor/fast-float-rust/issues/15
Use small code model for UEFI targets
* Since the code model only applies to the code and not the data and the code model
only applies to functions you call through using `call`, `jmp` and data with `lea`, etc…
If you are calling functions using the function pointers from the UEFI structures the code
model does not apply in that case. It’s just related to the address space size of your own binary.
Since UEFI (uefi is all relocatable) uses relocatable PEs (relocatable code does not care about the
code model) so, we use the small code model here.
* Since applications don't usually take gigabytes of memory, setting the
target to use the small code model should result in better codegen (comparable
with majority of other targets).
Large code models are also known for generating horrible code, for
example 16 bytes of code to load a single 8-byte value.
Signed-off-by: Andy-Python-Programmer <andypythonappdeveloper@gmail.com>
Do not allow JSON targets to set is-builtin: true
Note that this will affect (and make builds fail for) all of the projects out there that have target files invalid in this way. Crater, however, does not really cover these kinds of the codebases, so it is quite difficult to measure the impact. That said, the target files invalid in this way can start causing build failures each time LLVM is upgraded, anyway, so it is probably a good opportunity to disallow this property, entirely.
Another approach considered was to simply not parse this field anymore, which would avoid making the builds explicitly fail, but it wasn't clear to me if `is-builtin` was always set unintentionally… In case this was the case, I'd expect people to file a feature request stating specifically for what purpose they were using `is-builtin`.
Fixes#86017
Implementation is based off fast-float-rust, with a few notable changes.
- Some unsafe methods have been removed.
- Safe methods with inherently unsafe functionality have been removed.
- All unsafe functionality is documented and provably safe.
- Extensive documentation has been added for simpler maintenance.
- Inline annotations on internal routines has been removed.
- Fixed Python errors in src/etc/test-float-parse/runtests.py.
- Updated test-float-parse to be a library, to avoid missing rand dependency.
- Added regression tests for #31109 and #31407 in core tests.
- Added regression tests for #31109 and #31407 in ui tests.
- Use the existing slice primitive to simplify shared dec2flt methods
- Remove Miri ignores from dec2flt, due to faster parsing times.
- resolves#85198
- resolves#85214
- resolves#85234
- fixes#31407
- fixes#31109
- fixes#53015
- resolves#68396
- closes https://github.com/aldanor/fast-float-rust/issues/15
* Since the code model only applies to the code and not the data and the code model
only applies to functions you call through using `call`, `jmp` and data with `lea`, etc…
If you are calling functions using the function pointers from the UEFI structures the code
model does not apply in that case. It’s just related to the address space size of your own binary.
Since UEFI (uefi is all relocatable) uses relocatable PEs (relocatable code does not care about the
code model) so, we use the small code model here.
* Since applications don't usually take gigabytes of memory, setting the
target to use the small code model should result in better codegen (comparable
with majority of other targets).
Large code models are also known for generating horrible code, for
example 16 bytes of code to load a single 8-byte value.
* Use the LLVM default code model for the architecture for the
x86_64-unknown-uefi targets. For reference small is the default
code model on x86 in LLVM: <7de2173c2a/llvm/lib/Target/X86/X86TargetMachine.cpp (L204)>
* Remove the comments too as they are not UEFI-specific and applies
to pretty much any target. I added them before as I was explicitily
setting the code model to small.
Signed-off-by: Andy-Python-Programmer <andypythonappdeveloper@gmail.com>
Add initial implementation of HIR-based WF checking for diagnostics
During well-formed checking, we walk through all types 'nested' in
generic arguments. For example, WF-checking `Option<MyStruct<u8>>`
will cause us to check `MyStruct<u8>` and `u8`. However, this is done
on a `rustc_middle::ty::Ty`, which has no span information. As a result,
any errors that occur will have a very general span (e.g. the
definintion of an associated item).
This becomes a problem when macros are involved. In general, an
associated type like `type MyType = Option<MyStruct<u8>>;` may
have completely different spans for each nested type in the HIR. Using
the span of the entire associated item might end up pointing to a macro
invocation, even though a user-provided span is available in one of the
nested types.
This PR adds a framework for HIR-based well formed checking. This check
is only run during error reporting, and is used to obtain a more precise
span for an existing error. This is accomplished by individually
checking each 'nested' type in the HIR for the type, allowing us to
find the most-specific type (and span) that produces a given error.
The majority of the changes are to the error-reporting code. However,
some of the general trait code is modified to pass through more
information.
Since this has no soundness implications, I've implemented a minimal
version to begin with, which can be extended over time. In particular,
this only works for HIR items with a corresponding `DefId` (e.g. it will
not work for WF-checking performed within function bodies).
During well-formed checking, we walk through all types 'nested' in
generic arguments. For example, WF-checking `Option<MyStruct<u8>>`
will cause us to check `MyStruct<u8>` and `u8`. However, this is done
on a `rustc_middle::ty::Ty`, which has no span information. As a result,
any errors that occur will have a very general span (e.g. the
definintion of an associated item).
This becomes a problem when macros are involved. In general, an
associated type like `type MyType = Option<MyStruct<u8>>;` may
have completely different spans for each nested type in the HIR. Using
the span of the entire associated item might end up pointing to a macro
invocation, even though a user-provided span is available in one of the
nested types.
This PR adds a framework for HIR-based well formed checking. This check
is only run during error reporting, and is used to obtain a more precise
span for an existing error. This is accomplished by individually
checking each 'nested' type in the HIR for the type, allowing us to
find the most-specific type (and span) that produces a given error.
The majority of the changes are to the error-reporting code. However,
some of the general trait code is modified to pass through more
information.
Since this has no soundness implications, I've implemented a minimal
version to begin with, which can be extended over time. In particular,
this only works for HIR items with a corresponding `DefId` (e.g. it will
not work for WF-checking performed within function bodies).
Rollup of 7 pull requests
Successful merges:
- #87107 (Loop over all opaque types instead of looking at just the first one with the same DefId)
- #87158 (Suggest full enum variant for local modules)
- #87174 (Stabilize `[T; N]::map()`)
- #87179 (Mark `const_trait_impl` as active)
- #87180 (feat(rustdoc): open sidebar menu when links inside it are focused)
- #87188 (Add GUI test for auto-hide-trait-implementations setting)
- #87200 (TAIT: Infer all inference variables in opaque type substitutions via InferCx)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
TAIT: Infer all inference variables in opaque type substitutions via InferCx
The previous algorithm was correct for the example given in its
documentation, but when the TAIT was declared as a free item
instead of an associated item, the generic parameters were the
wrong ones.
cc `@spastorino`
r? `@nikomatsakis`
Loop over all opaque types instead of looking at just the first one with the same DefId
This exposed a bug in VecMap and is needed for https://github.com/rust-lang/rust/pull/86410 anyway
r? ``@spastorino``
cc ``@nikomatsakis``
The previous algorithm was correct for the example given in its
documentation, but when the TAIT was declared as a free item
instead of an associated item, the generic parameters were the
wrong ones.
Remove refs from Pat slices
Changes `PatKind::Or(&'hir [&'hir Pat<'hir>])` to `PatKind::Or(&'hir [Pat<'hir>])` and others. This is more consistent with `ExprKind`, saves a little memory, and is a little easier to use.
RFC2229: Use the correct place type
Closes https://github.com/rust-lang/rust/issues/87097
The ICE occurred because instead of looking at the type of the place after all the projections are applied, we instead looked at the `base_ty` of the Place to decide whether a discriminant should be read of not. This lead to two issues:
1. the kind of the type is not necessarily `Adt` since we only look at the `base_ty`, it could be instead `Ref` for example
2. if the kind of the type is `Adt` you could still be looking at the wrong variant to make a decision on whether the discriminant should be read or not
r? `@nikomatsakis`
Replace associated item bound vars with placeholders when projecting
Fixes#76407Fixes#76826
Similar, but more limited, to #85499. This allows us to handle things like `for<'a> <T as Trait>::Assoc<'a>` but not `for<'a> <T as Trait<'a>>::Assoc`, unblocking GATs.
r? `@nikomatsakis`
Add -Zfuture-incompat-test to assist with testing future-incompat reports.
This adds a `-Zfuture-incompat-test` cli flag to assist with testing future-incompatible reports. This flag causes all lints to be treated as a future-incompatible lint, and will emit a report for them. This is being added so that Cargo's testsuite can reliably test the reporting infrastructure. Right now, Cargo relies on using array_into_iter as a test subject. Since the breaking "future incompatible" lints are never intended to last forever, this means Cargo's testsuite would always need to keep changing to choose different lints (for example, #86330 proposed dropping that moniker for array_into_iter). With this flag, Cargo's tests can trigger any lint and check for the report.
Reuse CrateNum for proc-macro crates even when cross-compiling
Proc-macros are always compiled for the host, so this should be the same
in every way as recompiling the crate.
I am not sure why the previous code special-cased the target, since the
compiler properly gives an error when trying to load a crate for a
different host:
```
error[E0461]: couldn't find crate `dependency` with expected target triple x86_64-unknown-linux-gnu
--> /home/joshua/rustc4/src/test/ui/cfg-dependent.rs:8:2
|
LL | dependency::is_64();
| ^^^^^^^^^^
|
= note: the following crate versions were found:
crate `dependency`, target triple i686-unknown-linux-gnu: /home/joshua/rustc4/build/x86_64-unknown-linux-gnu/test/ui/cfg-dependent/auxiliary/libdependency.so
```
I think another possible fix is to remove the check altogether. But I'm
not sure, and this fix works, so I'm not making the larger change here.
Fixes https://github.com/rust-lang/rust/issues/56935.
r? `@petrochenkov` cc `@alexcrichton`
Proc-macros are always compiled for the host, so this should be the same
in every way as recompiling the crate.
I am not sure why the previous code special-cased the target, since the
compiler properly gives an error when trying to load a crate for a
different host:
```
error[E0461]: couldn't find crate `dependency` with expected target triple x86_64-unknown-linux-gnu
--> /home/joshua/rustc4/src/test/ui/cfg-dependent.rs:8:2
|
LL | dependency::is_64();
| ^^^^^^^^^^
|
= note: the following crate versions were found:
crate `dependency`, target triple i686-unknown-linux-gnu: /home/joshua/rustc4/build/x86_64-unknown-linux-gnu/test/ui/cfg-dependent/auxiliary/libdependency.so
```
I think another possible fix is to remove the check altogether. But I'm
not sure, and this fix works, so I'm not making the larger change here.
expand: Support helper attributes for built-in derive macros
This is needed for https://github.com/rust-lang/rust/pull/86735 (derive macro `Default` should have a helper attribute `default`).
With this PR we can specify helper attributes for built-in derives using syntax `#[rustc_builtin_macro(MacroName, attributes(attr1, attr2, ...))]` which mirrors equivalent syntax for proc macros `#[proc_macro_derive(MacroName, attributes(attr1, attr2, ...))]`.
Otherwise expansion infra was already ready for this.
The attribute parsing code is shared between proc macro derives and built-in macros (`fn parse_macro_name_and_helper_attrs`).
This resolves all the problems we had around "normalizing" the representation of a Scalar in case it carries a Pointer value: we can just use Pointer if we want to have a value taht we are sure is already normalized.
Handle non-integer const generic parameters in debuginfo type names.
This PR fixes an ICE introduced by https://github.com/rust-lang/rust/pull/85269 which started emitting const generic arguments for debuginfo names but did not cover the case where such an argument could not be evaluated to a flat string of bits.
The fix implemented in this PR is very basic: If `try_eval_bits()` fails for the constant in question, we fall back to generating a stable hash of the constant and emit that instead. This way we get a (virtually) unique name and side step the problem of generating a string representation of a potentially complex value.
The downside is that the generated name will be rather opaque. E.g. the regression test adds a function `const_generic_fn_non_int<()>` which is then rendered as `const_generic_fn_non_int<{CONST#fe3cfa0214ac55c7}>`. I think it's an open question how to deal with this more gracefully.
I'd be interested in ideas on how to do this better.
r? `@wesleywiser`
cc `@dpaoliello` (do you see any problems with this approach?)
cc `@Mark-Simulacrum` & `@nagisa` (who I've seen comment on debuginfo issues recently -- anyone else?)
Fixes https://github.com/rust-lang/rust/issues/86893
Rollup of 6 pull requests
Successful merges:
- #87085 (Search result colors)
- #87090 (Make BTreeSet::split_off name elements like other set methods do)
- #87098 (Unignore some pretty printing tests)
- #87099 (Upgrade `cc` crate to 1.0.69)
- #87101 (Suggest a path separator if a stray colon is found in a match arm)
- #87102 (Add GUI test for "go to first" feature)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
When building with profile-generate request that metadata is kept
during the gc_sections call, as this can sometimes strip out profile
data.
This missing information in the prof files can then result in missing
functions when using the profile information.
Avoid cloning ExpnData to access Span edition
ExpnData is a fairly hefty structure to clone; cloning it may not be cheap. In
some cases this may get optimized out, but it's not clear that will always be
the case. Try to avoid that cost.
r? `@ghost` -- opening for a perf run to start with
Fix internal `default_hash_types` lint to use resolved path
I run into false positives now and then (mostly in Clippy) when I want to name some util after HashMap.
ExpnData is a fairly hefty structure to clone; cloning it may not be cheap. In
some cases this may get optimized out, but it's not clear that will always be
the case. Try to avoid that cost.
target abi
Implement cfg(target_abi) (RFC 2992)
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
Update targets to use `target_abi`
All eabi targets have `target_abi = "eabi".`
All eabihf targets have `target_abi = "eabihf"`.
`armv6_unknown_freebsd` and `armv7_unknown_freebsd` have `target_abi = "eabihf"`.
All abi64 targets have `target_abi = "abi64"`.
All ilp32 targets have `target_abi = "ilp32"`.
All softfloat targets have `target_abi = "softfloat"`.
All *-uwp-windows-* targets have `target_abi = "uwp"`.
All spe targets have `target_abi = "spe"`.
All macabi targets have `target_abi = "macabi"`.
aarch64-apple-ios-sim has `target_abi = "sim"`.
`x86_64-fortanix-unknown-sgx` has `target_abi = "fortanix"`.
`x86_64-unknown-linux-gnux32` has `target_abi = "x32"`.
Add FIXME entries for targets for which existing values need to change
once `cfg_target_abi` becomes stable. (All of them are tier 3 targets.)
Add a test for `target_abi` in `--print cfg`.
Implement Mutation- and BorrowOfLayoutConstrainedField in thir-unsafeck
Since nobody has so far claimed Mutation- and BorrowOfLayoutConstrainedField in rust-lang/project-thir-unsafeck#7, I have taken the liberty of implementing them in thir-unsafeck.
r? `@LeSeulArtichaut`
CTFE engine: small cleanups
I noticed these while preparing a large PR, and figured I'd better send them ahead to not muddy the diff unnecessarily.
- remove remaining use of Pointer in Allocation API (I missed those in https://github.com/rust-lang/rust/pull/85472)
- remove unnecessary deallocate_local hack (this logic does not seem necessary any more)
r? `@oli-obk`
Simplify future incompatible reporting.
This simplifies the implementation of the future incompatible reporting system. Instead of having a separate field in the future_incompatible definition, this reuses the `FutureIncompatibilityReason` enum. It also drops the "date" field. Cargo does not use the date field, and there isn't much of a need for this to be structured, and I am skeptical that the date can be predicted reliably. The date or release version can be listed in the lint text if desired.
Fix ICE with unsized type in const pattern
Fixes#87046. The `deref_const()` query currently contains the following check:
e9a387d6cf/compiler/rustc_mir/src/const_eval/mod.rs (L191-L204)
i.e. this will cause an ICE for every unsized type except slices. An error is reported with my changes if such a type is used as a const pattern (this should not be a breaking change, since so far, this has caused an ICE).
Improve error reporting for modifications behind `&` references
I had a look at #84210 and noticed that #85823 has effectively already fixed#84210.
However, the string matching in #85823 is _very_ crude and already breaks down when a variable name starts with `mut`. I have made this a bit more robust; further improvements could definitely be made but are complicated by the lack of information provided by an earlier pass:
ce331ee6ee/compiler/rustc_mir_build/src/build/matches/mod.rs (L2103-L2107)
I have also fixed a missing comma in the error message.
Report an error if resolution of closure call functions failed
This pull request fixes#86238. The current implementation seems to assume that resolution of closure call functions (I'm not sure what the proper term is; I mean `call` of `Fn` etc.) can never fail:
60f1a2fc4b/compiler/rustc_typeck/src/check/callee.rs (L590-L595)
But actually, it can, if the `fn`/`fn_mut`/`fn_once` lang items are not defined, or don't have an associated `call`/`call_mut`/`call_once` function, leading to the ICE described in #86238. I have therefore turned the `span_bug!()` into an error message, which prevents the ICE.
Do not suggest adding a semicolon after `?`
Fixes#87051. I have only modified `report_return_mismatched_types()`, i.e. my changes only affect suggestions to add `;` for return type mismatches, but this never makes sense after `?`, because the function cannot return `()` if `?` is used (it has to return a `Result` or an `Option`), and a semicolon won't help if the expected and actual `Err` types differ, even if the expected one is `()`.
Stabilize "RangeFrom" patterns in 1.55
Implements a partial stabilization of #67264 and #37854.
Reference PR: https://github.com/rust-lang/reference/pull/900
# Stabilization Report
This stabilizes the `X..` pattern, shown as such, offering an exhaustive match for unsigned integers:
```rust
match x as u32 {
0 => println!("zero!"),
1.. => println!("positive number!"),
}
```
Currently if a Rust author wants to write such a match on an integer, they must use `1..={integer}::MAX` . By allowing a "RangeFrom" style pattern, this simplifies the match to not require the MAX path and thus not require specifically repeating the type inside the match, allowing for easier refactoring. This is particularly useful for instances like the above case, where different behavior on "0" vs. "1 or any positive number" is desired, and the actual MAX is unimportant.
Notably, this excepts slice patterns which include half-open ranges from stabilization, as the wisdom of those is still subject to some debate.
## Practical Applications
Instances of this specific usage have appeared in the compiler:
16143d1067/compiler/rustc_middle/src/ty/inhabitedness/mod.rs (L219)673d0db5e3/compiler/rustc_ty_utils/src/ty.rs (L524)
And I have noticed there are also a handful of "in the wild" users who have deployed it to similar effect, especially in the case of rejecting any value of a certain number or greater. It simply makes it much more ergonomic to write an irrefutable match, as done in Katholieke Universiteit Leuven's [SCALE and MAMBA project](05e5db00d5/WebAssembly/scale_std/src/fixed_point.rs (L685-L695)).
## Tests
There were already many tests in [src/test/ui/half-open-range/patterns](90a2e5e3fe/src/test/ui/half-open-range-patterns), as well as [generic pattern tests that test the `exclusive_range_pattern` feature](673d0db5e3/src/test/ui/pattern/usefulness/integer-ranges/reachability.rs), many dating back to the feature's introduction and remaining standing to this day. However, this stabilization comes with some additional tests to explore the... sometimes interesting behavior of interactions with other patterns. e.g. There is, at least, a mild diagnostic improvement in some edge cases, because before now, the pattern `0..=(5+1)` encounters the `half_open_range_patterns` feature gate and can thus emit the request to enable the feature flag, while also emitting the "inclusive range with no end" diagnostic. There is no intent to allow an `X..=` pattern that I am aware of, so removing the flag request is a strict improvement. The arrival of the `J | K` "or" pattern also enables some odd formations.
Some of the behavior tested for here is derived from experiments in this [Playground](https://play.rust-lang.org/?version=nightly&mode=debug&edition=2018&gist=58777b3c715c85165ac4a70d93efeefc) example, linked at https://github.com/rust-lang/rust/issues/67264#issuecomment-812770692, which may be useful to reference to observe the current behavior more closely.
In addition tests constituting an explanation of the "slicing range patterns" syntax issue are included in this PR.
## Desiderata
The exclusive range patterns and half-open range patterns are fairly strongly requested by many authors, as they make some patterns much more natural to write, but there is disagreement regarding the "closed" exclusive range pattern or the "RangeTo" pattern, especially where it creates "off by one" gaps in the presence of a "catch-all" wildcard case. Also, there are obviously no range analyses in place that will force diagnostics for e.g. highly overlapping matches. I believe these should be warned on, ideally, and I think it would be reasonable to consider such a blocker to stabilizing this feature, but there is no technical issue with the feature as-is from the purely syntactic perspective as such overlapping or missed matches can already be generated today with such a catch-all case. And part of the "point" of the feature, at least from my view, is to make it easier to omit wildcard matches: a pattern with such an "open" match produces an irrefutable match and does not need the wild card case, making it easier to benefit from exhaustiveness checking.
## History
- Implemented:
- Partially via exclusive ranges: https://github.com/rust-lang/rust/pull/35712
- Fully with half-open ranges: https://github.com/rust-lang/rust/pull/67258
- Unresolved Questions:
- The precedence concerns of https://github.com/rust-lang/rust/pull/48501 were considered as likely requiring adjustment but probably wanting a uniform consistent change across all pattern styles, given https://github.com/rust-lang/rust/issues/67264#issuecomment-720711656, but it is still unknown what changes might be desired
- How we want to handle slice patterns in ranges seems to be an open question still, as witnessed in the discussion of this PR!
I checked but I couldn't actually find an RFC for this, and given "approved provisionally by lang team without an RFC", I believe this might require an RFC before it can land? Unsure of procedure here, on account of this being stabilizing a subset of a feature of syntax.
r? `@scottmcm`
Improves migrations lint for RFC2229
This PR improves the current disjoint capture migration lint by providing more information on why drop order or auto trait implementation for a closure is impacted by the use of the new feature.
The drop order migration lint will now look something like this:
```
error: changes to closure capture in Rust 2021 will affect drop order
--> $DIR/significant_drop.rs:163:21
|
LL | let c = || {
| ^^
...
LL | tuple.0;
| ------- in Rust 2018, closure captures all of `tuple`, but in Rust 2021, it only captures `tuple.0`
...
LL | }
| - in Rust 2018, `tuple` would be dropped here, but in Rust 2021, only `tuple.0` would be dropped here alongside the closure
```
The auto trait migration lint will now look something like this:
```
error: changes to closure capture in Rust 2021 will affect `Send` trait implementation for closure
--> $DIR/auto_traits.rs:14:19
|
LL | thread::spawn(move || unsafe {
| ^^^^^^^^^^^^^^ in Rust 2018, this closure would implement `Send` as `fptr` implements `Send`, but in Rust 2021, this closure would no longer implement `Send` as `fptr.0` does not implement `Send`
...
LL | *fptr.0 = 20;
| ------- in Rust 2018, closure captures all of `fptr`, but in Rust 2021, it only captures `fptr.0`
```
r? `@nikomatsakis`
Closes https://github.com/rust-lang/project-rfc-2229/issues/54
Add clobber-only register classes for asm!
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
- The `Rustc::expn_id` field kept redundant information
- `SyntaxContext` is no longer thrown away before `save_proc_macro_span` because it's thrown away during metadata encoding anyway
Improve opaque pointers support
Opaque pointers are coming, and rustc is not ready.
This adds partial support by passing an explicit load type to LLVM. Two issues I've encountered:
* The necessary type was not available at the point where non-temporal copies were generated. I've pushed the code for that upwards out of the memcpy implementation and moved the position of a cast to make do with the types we have available. (I'm not sure that cast is needed at all, but have retained it in the interest of conservativeness.)
* The `PlaceRef::project_deref()` function used during debuginfo generation seems to be buggy in some way -- though I haven't figured out specifically what it does wrong. Replacing it with `load_operand().deref()` did the trick, but I don't really know what I'm doing here.
remove const_raw_ptr_to_usize_cast feature
This feature currently has the strange status of "const-only `unsafe`", which was an experiment that we no longer think is a good idea. We need to find better ways to enable things like "messing with the low bits of a pointer" during CTFE.
r? `@oli-obk`
Fix several ICEs related to malformed `#[repr(...)]` attributes
This PR fixes#83921. #83921 actually contains two related but distinct issues (one of them incorrectly reported as a duplicate in https://github.com/rust-lang/rust/issues/83921#issuecomment-814640734):
In the first, a call to `delay_span_bug` leads to an ICE when compiling with `-Zunpretty=everybody_loops` (and some other pretty-printing modes), because the corresponding error is emitted in a later pass, which does not run when only pretty-printing is requested.
The second issue is about parsing `#[repr(...)]` attributes. Currently, all of the following cause an ICE when applied to a struct/enum:
```rust
#[repr(packed())]
#[repr(align)]
#[repr(align(2, 4))]
#[repr(align())]
#[repr(i8())]
#[repr(u32(42))]
#[repr(i64 = 2)]
```
I have fixed this by expanding the well-formedness checks in `find_repr_attrs()`.
Revert the revert of renaming traits::VTable to ImplSource
As #72114 and #73055 were merged so closely together I think this
accidentally happened while rebasing
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
Support forwarding caller location through trait object method call
Since PR #69251, the `#[track_caller]` attribute has been supported on
traits. However, it only has an effect on direct (monomorphized) method
calls. Calling a `#[track_caller]` method on a trait object will *not*
propagate caller location information - instead, `Location::caller()` will
return the location of the method definition.
This PR forwards caller location information when `#[track_caller]` is
present on the method definition in the trait. This is possible because
`#[track_caller]` in this position is 'inherited' by any impls of that
trait, so all implementations will have the same ABI.
This PR does *not* change the behavior in the case where
`#[track_caller]` is present only on the impl of a trait.
While all implementations of the method might have an explicit
`#[track_caller]`, we cannot know this at codegen time, since other
crates may have impls of the trait. Therefore, we keep the current
behavior of not forwarding the caller location, ensuring that all
implementations of the trait will have the correct ABI.
See the modified test for examples of how this works
If crate declares `rust_eh_personality`, re-use existing declaration
as otherwise attempts to set function attributes that follow the
declaration will fail (unless it happens to have exactly the same
type signature as the one predefined in the compiler).
