* Always point at macros, including derive macros
* Point at non-local items that introduce a trait requirement
* On private associated item, point at definition
Make `--force-warns` a normal lint level option
Now that `ForceWarn` is a lint level, there's no reason `--force-warns` should be treated differently from other options that set lint levels. This merges the `ForceWarn` handling in with the other lint level command line options. It also unifies all of the relevant selection logic in `compiler/rustc_lint/src/levels.rs`, rather than having some of it weirdly elsewhere.
Fixes#86958, which arose from the special-cased handling of `ForceWarn` having had an error in it.
Don't create references to uninitialized data in `List::from_arena`
Previously `result` and `arena_slice` were references pointing to uninitialized data, which is technically UB. They may have been fine because the pointed data is `Copy` and and they were only written to, but the semantics of this aren't clearly defined yet, and since we have a sound way to do the same thing I don't think we should keep the possibly-unsound way.
Compute a better `lint_node_id` during expansion
When we need to emit a lint at a macro invocation, we currently use the
`NodeId` of its parent definition (e.g. the enclosing function). This
means that any `#[allow]` / `#[deny]` attributes placed 'closer' to the
macro (e.g. on an enclosing block or statement) will have no effect.
This commit computes a better `lint_node_id` in `InvocationCollector`.
When we visit/flat_map an AST node, we assign it a `NodeId` (earlier
than we normally would), and store than `NodeId` in current
`ExpansionData`. When we collect a macro invocation, the current
`lint_node_id` gets cloned along with our `ExpansionData`, allowing it
to be used if we need to emit a lint later on.
This improves the handling of `#[allow]` / `#[deny]` for
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` and some `asm!`-related lints.
The 'legacy derive helpers' lint retains its current behavior
(I've inlined the now-removed `lint_node_id` function), since
there isn't an `ExpansionData` readily available.
feat(rustc_lint): add `dyn_drop`
Based on the conversation in #86747.
Explanation
-----------
A trait object bound of the form `dyn Drop` is most likely misleading and not what the programmer intended.
`Drop` bounds do not actually indicate whether a type can be trivially dropped or not, because a composite type containing `Drop` types does not necessarily implement `Drop` itself. Naïvely, one might be tempted to write a deferred drop system, to pull cleaning up memory out of a latency-sensitive code path, using `dyn Drop` trait objects. However, this breaks down e.g. when `T` is `String`, which does not implement `Drop`, but should probably be accepted.
To write a trait object bound that accepts anything, use a placeholder trait with a blanket implementation.
```rust
trait Placeholder {}
impl<T> Placeholder for T {}
fn foo(_x: Box<dyn Placeholder>) {}
```
Don't use gc-sections with profile-generate.
When building with profile-generate don't call gc_sections as this can
can sometimes strip out profile data. This missing information in the
prof files can then result in missing functions when using the profile
information.
#78226
r? `@Mark-Simulacrum`
Use existing declaration of rust_eh_personality
If crate declares `rust_eh_personality`, re-use existing declaration
as otherwise attempts to set function attributes that follow the
declaration will fail (unless it happens to have exactly the same
type signature as the one predefined in the compiler).
Fixes#70117.
Fixes https://github.com/rust-lang/rust/pull/81469#issuecomment-809428126; probably.
Based on the conversation in #86747.
Explanation
-----------
A trait object bound of the form `dyn Drop` is most likely misleading
and not what the programmer intended.
`Drop` bounds do not actually indicate whether a type can be trivially
dropped or not, because a composite type containing `Drop` types does
not necessarily implement `Drop` itself. Naïvely, one might be tempted
to write a deferred drop system, to pull cleaning up memory out of a
latency-sensitive code path, using `dyn Drop` trait objects. However,
this breaks down e.g. when `T` is `String`, which does not implement
`Drop`, but should probably be accepted.
To write a trait object bound that accepts anything, use a placeholder
trait with a blanket implementation.
```rust
trait Placeholder {}
impl<T> Placeholder for T {}
fn foo(_x: Box<dyn Placeholder>) {}
```
Add diagnostics for mistyped inclusive range
Inclusive ranges are correctly typed as `..=`. However, it's quite easy to think of it as being like `==`, and type `..==` instead. This PR adds helpful diagnostics for this case.
Resolves#86395 (there are some other cases there, but I think those should probably have separate issues).
r? `@estebank`
Add diagnostic items for Clippy
This adds a bunch of diagnostic items to `std`/`core`/`alloc` functions, structs and traits used in Clippy. The actual refactorings in Clippy to use these items will be done in a different PR in Clippy after the next sync.
This PR doesn't include all paths Clippy uses, I've only gone through the first 85 lines of Clippy's [`paths.rs`](ecf85f4bdc/clippy_utils/src/paths.rs) (after rust-lang/rust-clippy#7466) to get some feedback early on. I've also decided against adding diagnostic items to methods, as it would be nicer and more scalable to access them in a nicer fashion, like adding a `is_diagnostic_assoc_item(did, sym::Iterator, sym::map)` function or something similar (Suggested by `@camsteffen` [on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/147480-t-compiler.2Fwg-diagnostics/topic/Diagnostic.20Item.20Naming.20Convention.3F/near/225024603))
There seems to be some different naming conventions when it comes to diagnostic items, some use UpperCamelCase (`BinaryHeap`) and some snake_case (`hashmap_type`). This PR uses UpperCamelCase for structs and traits and snake_case with the module name as a prefix for functions. Any feedback on is this welcome.
cc: rust-lang/rust-clippy#5393
r? `@Manishearth`
Remove nondeterminism in multiple-definitions test
Compare all fields in `DllImport` when sorting to avoid nondeterminism in the error for multiple inconsistent definitions of an extern function. Restore the multiple-definitions test.
Resolves#87084.
Check that const parameters of trait methods have compatible types
This PR fixes#86820. The problem is that this currently passes the type checker:
```rust
trait Tr {
fn foo<const N: u8>(self) -> u8;
}
impl Tr for f32 {
fn foo<const N: bool>(self) -> u8 { 42 }
}
```
i.e. the type checker fails to check whether const parameters in `impl` methods have the same type as the corresponding declaration in the trait. With my changes, I get, for the above code:
```
error[E0053]: method `foo` has an incompatible const parameter type for trait
--> test.rs:6:18
|
6 | fn foo<const N: bool>(self) -> u8 { 42 }
| ^
|
note: the const parameter `N` has type `bool`, but the declaration in trait `Tr::foo` has type `u8`
--> test.rs:2:18
|
2 | fn foo<const N: u8>(self) -> u8;
| ^
error: aborting due to previous error
```
This fixes#86820, where an ICE happens later on because the trait method is declared with a const parameter of type `u8`, but the `impl` uses one of type `usize`:
> `expected int of size 8, but got size 1`
When we need to emit a lint at a macro invocation, we currently use the
`NodeId` of its parent definition (e.g. the enclosing function). This
means that any `#[allow]` / `#[deny]` attributes placed 'closer' to the
macro (e.g. on an enclosing block or statement) will have no effect.
This commit computes a better `lint_node_id` in `InvocationCollector`.
When we visit/flat_map an AST node, we assign it a `NodeId` (earlier
than we normally would), and store than `NodeId` in current
`ExpansionData`. When we collect a macro invocation, the current
`lint_node_id` gets cloned along with our `ExpansionData`, allowing it
to be used if we need to emit a lint later on.
This improves the handling of `#[allow]` / `#[deny]` for
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` and some `asm!`-related lints.
The 'legacy derive helpers' lint retains its current behavior
(I've inlined the now-removed `lint_node_id` function), since
there isn't an `ExpansionData` readily available.
Some perf optimizations and logging
Various bits of (potential) perf optimizations and some logging additions/changes pulled out from #85499
The only not extremely straightforward change is adding `needs_normalization` in `trait::project`. This is just a perf optimization to avoid fold through a type with *only* opaque types in `UserFacing` mode (as they aren't replaced).
This should be a simple PR for *anyone* to review, so I'm going to let highfive assign. But I'll go ahead and cc `@nikomatsakis` in case he has time today.
Make expansions stable for incr. comp.
This PR aims to make expansions stable for incr. comp. by using the same architecture as definitions:
- the interned identifier `ExpnId` contains a `CrateNum` and a crate-local id;
- bidirectional maps `ExpnHash <-> ExpnId` are setup;
- incr. comp. on-disk cache saves and reconstructs expansions using their `ExpnHash`.
I tried to use as many `LocalExpnId` as I could in the resolver code, but I may have missed a few opportunities.
All this will allow to use an `ExpnId` as a query key, and to force this query without recomputing caller queries. For instance, this will be used to implement #85999.
r? `@petrochenkov`
CTFE/Miri engine Pointer type overhaul
This fixes the long-standing problem that we are using `Scalar` as a type to represent pointers that might be integer values (since they point to a ZST). The main problem is that with int-to-ptr casts, there are multiple ways to represent the same pointer as a `Scalar` and it is unclear if "normalization" (i.e., the cast) already happened or not. This leads to ugly methods like `force_mplace_ptr` and `force_op_ptr`.
Another problem this solves is that in Miri, it would make a lot more sense to have the `Pointer::offset` field represent the full absolute address (instead of being relative to the `AllocId`). This means we can do ptr-to-int casts without access to any machine state, and it means that the overflow checks on pointer arithmetic are (finally!) accurate.
To solve this, the `Pointer` type is made entirely parametric over the provenance, so that we can use `Pointer<AllocId>` inside `Scalar` but use `Pointer<Option<AllocId>>` when accessing memory (where `None` represents the case that we could not figure out an `AllocId`; in that case the `offset` is an absolute address). Moreover, the `Provenance` trait determines if a pointer with a given provenance can be cast to an integer by simply dropping the provenance.
I hope this can be read commit-by-commit, but the first commit does the bulk of the work. It introduces some FIXMEs that are resolved later.
Fixes https://github.com/rust-lang/miri/issues/841
Miri PR: https://github.com/rust-lang/miri/pull/1851
r? `@oli-obk`
Update Rust Float-Parsing Algorithms to use the Eisel-Lemire algorithm.
# Summary
Rust, although it implements a correct float parser, has major performance issues in float parsing. Even for common floats, the performance can be 3-10x [slower](https://arxiv.org/pdf/2101.11408.pdf) than external libraries such as [lexical](https://github.com/Alexhuszagh/rust-lexical) and [fast-float-rust](https://github.com/aldanor/fast-float-rust).
Recently, major advances in float-parsing algorithms have been developed by Daniel Lemire, along with others, and implement a fast, performant, and correct float parser, with speeds up to 1200 MiB/s on Apple's M1 architecture for the [canada](0e2b5d163d/data/canada.txt) dataset, 10x faster than Rust's 130 MiB/s.
In addition, [edge-cases](https://github.com/rust-lang/rust/issues/85234) in Rust's [dec2flt](868c702d0c/library/core/src/num/dec2flt) algorithm can lead to over a 1600x slowdown relative to efficient algorithms. This is due to the use of Clinger's correct, but slow [AlgorithmM and Bellepheron](http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.45.4152&rep=rep1&type=pdf), which have been improved by faster big-integer algorithms and the Eisel-Lemire algorithm, respectively.
Finally, this algorithm provides substantial improvements in the number of floats the Rust core library can parse. Denormal floats with a large number of digits cannot be parsed, due to use of the `Big32x40`, which simply does not have enough digits to round a float correctly. Using a custom decimal class, with much simpler logic, we can parse all valid decimal strings of any digit count.
```rust
// Issue in Rust's dec2fly.
"2.47032822920623272088284396434110686182e-324".parse::<f64>(); // Err(ParseFloatError { kind: Invalid })
```
# Solution
This pull request implements the Eisel-Lemire algorithm, modified from [fast-float-rust](https://github.com/aldanor/fast-float-rust) (which is licensed under Apache 2.0/MIT), along with numerous modifications to make it more amenable to inclusion in the Rust core library. The following describes both features in fast-float-rust and improvements in fast-float-rust for inclusion in core.
**Documentation**
Extensive documentation has been added to ensure the code base may be maintained by others, which explains the algorithms as well as various associated constants and routines. For example, two seemingly magical constants include documentation to describe how they were derived as follows:
```rust
// Round-to-even only happens for negative values of q
// when q ≥ −4 in the 64-bit case and when q ≥ −17 in
// the 32-bitcase.
//
// When q ≥ 0,we have that 5^q ≤ 2m+1. In the 64-bit case,we
// have 5^q ≤ 2m+1 ≤ 2^54 or q ≤ 23. In the 32-bit case,we have
// 5^q ≤ 2m+1 ≤ 2^25 or q ≤ 10.
//
// When q < 0, we have w ≥ (2m+1)×5^−q. We must have that w < 2^64
// so (2m+1)×5^−q < 2^64. We have that 2m+1 > 2^53 (64-bit case)
// or 2m+1 > 2^24 (32-bit case). Hence,we must have 2^53×5^−q < 2^64
// (64-bit) and 2^24×5^−q < 2^64 (32-bit). Hence we have 5^−q < 2^11
// or q ≥ −4 (64-bit case) and 5^−q < 2^40 or q ≥ −17 (32-bitcase).
//
// Thus we have that we only need to round ties to even when
// we have that q ∈ [−4,23](in the 64-bit case) or q∈[−17,10]
// (in the 32-bit case). In both cases,the power of five(5^|q|)
// fits in a 64-bit word.
const MIN_EXPONENT_ROUND_TO_EVEN: i32;
const MAX_EXPONENT_ROUND_TO_EVEN: i32;
```
This ensures maintainability of the code base.
**Improvements for Disguised Fast-Path Cases**
The fast path in float parsing algorithms attempts to use native, machine floats to represent both the significant digits and the exponent, which is only possible if both can be exactly represented without rounding. In practice, this means that the significant digits must be 53-bits or less and the then exponent must be in the range `[-22, 22]` (for an f64). This is similar to the existing dec2flt implementation.
However, disguised fast-path cases exist, where there are few significant digits and an exponent above the valid range, such as `1.23e25`. In this case, powers-of-10 may be shifted from the exponent to the significant digits, discussed at length in https://github.com/rust-lang/rust/issues/85198.
**Digit Parsing Improvements**
Typically, integers are parsed from string 1-at-a-time, requiring unnecessary multiplications which can slow down parsing. An approach to parse 8 digits at a time using only 3 multiplications is described in length [here](https://johnnylee-sde.github.io/Fast-numeric-string-to-int/). This leads to significant performance improvements, and is implemented for both big and little-endian systems.
**Unsafe Changes**
Relative to fast-float-rust, this library makes less use of unsafe functionality and clearly documents it. This includes the refactoring and documentation of numerous unsafe methods undesirably marked as safe. The original code would look something like this, which is deceptively marked as safe for unsafe functionality.
```rust
impl AsciiStr {
#[inline]
pub fn step_by(&mut self, n: usize) -> &mut Self {
unsafe { self.ptr = self.ptr.add(n) };
self
}
}
...
#[inline]
fn parse_scientific(s: &mut AsciiStr<'_>) -> i64 {
// the first character is 'e'/'E' and scientific mode is enabled
let start = *s;
s.step();
...
}
```
The new code clearly documents safety concerns, and does not mark unsafe functionality as safe, leading to better safety guarantees.
```rust
impl AsciiStr {
/// Advance the view by n, advancing it in-place to (n..).
pub unsafe fn step_by(&mut self, n: usize) -> &mut Self {
// SAFETY: same as step_by, safe as long n is less than the buffer length
self.ptr = unsafe { self.ptr.add(n) };
self
}
}
...
/// Parse the scientific notation component of a float.
fn parse_scientific(s: &mut AsciiStr<'_>) -> i64 {
let start = *s;
// SAFETY: the first character is 'e'/'E' and scientific mode is enabled
unsafe {
s.step();
}
...
}
```
This allows us to trivially demonstrate the new implementation of dec2flt is safe.
**Inline Annotations Have Been Removed**
In the previous implementation of dec2flt, inline annotations exist practically nowhere in the entire module. Therefore, these annotations have been removed, which mostly does not impact [performance](https://github.com/aldanor/fast-float-rust/issues/15#issuecomment-864485157).
**Fixed Correctness Tests**
Numerous compile errors in `src/etc/test-float-parse` were present, due to deprecation of `time.clock()`, as well as the crate dependencies with `rand`. The tests have therefore been reworked as a [crate](https://github.com/Alexhuszagh/rust/tree/master/src/etc/test-float-parse), and any errors in `runtests.py` have been patched.
**Undefined Behavior**
An implementation of `check_len` which relied on undefined behavior (in fast-float-rust) has been refactored, to ensure that the behavior is well-defined. The original code is as follows:
```rust
#[inline]
pub fn check_len(&self, n: usize) -> bool {
unsafe { self.ptr.add(n) <= self.end }
}
```
And the new implementation is as follows:
```rust
/// Check if the slice at least `n` length.
fn check_len(&self, n: usize) -> bool {
n <= self.as_ref().len()
}
```
Note that this has since been fixed in [fast-float-rust](https://github.com/aldanor/fast-float-rust/pull/29).
**Inferring Binary Exponents**
Rather than explicitly store binary exponents, this new implementation infers them from the decimal exponent, reducing the amount of static storage required. This removes the requirement to store [611 i16s](868c702d0c/library/core/src/num/dec2flt/table.rs (L8)).
# Code Size
The code size, for all optimizations, does not considerably change relative to before for stripped builds, however it is **significantly** smaller prior to stripping the resulting binaries. These binary sizes were calculated on x86_64-unknown-linux-gnu.
**new**
Using rustc version 1.55.0-dev.
opt-level|size|size(stripped)
|:-:|:-:|:-:|
0|400k|300K
1|396k|292K
2|392k|292K
3|392k|296K
s|396k|292K
z|396k|292K
**old**
Using rustc version 1.53.0-nightly.
opt-level|size|size(stripped)
|:-:|:-:|:-:|
0|3.2M|304K
1|3.2M|292K
2|3.1M|284K
3|3.1M|284K
s|3.1M|284K
z|3.1M|284K
# Correctness
The dec2flt implementation passes all of Rust's unittests and comprehensive float parsing tests, along with numerous other tests such as Nigel Toa's comprehensive float [tests](https://github.com/nigeltao/parse-number-fxx-test-data) and Hrvoje Abraham [strtod_tests](https://github.com/ahrvoje/numerics/blob/master/strtod/strtod_tests.toml). Therefore, it is unlikely that this algorithm will incorrectly round parsed floats.
# Issues Addressed
This will fix and close the following issues:
- resolves#85198
- resolves#85214
- resolves#85234
- fixes#31407
- fixes#31109
- fixes#53015
- resolves#68396
- closes https://github.com/aldanor/fast-float-rust/issues/15
Use small code model for UEFI targets
* Since the code model only applies to the code and not the data and the code model
only applies to functions you call through using `call`, `jmp` and data with `lea`, etc…
If you are calling functions using the function pointers from the UEFI structures the code
model does not apply in that case. It’s just related to the address space size of your own binary.
Since UEFI (uefi is all relocatable) uses relocatable PEs (relocatable code does not care about the
code model) so, we use the small code model here.
* Since applications don't usually take gigabytes of memory, setting the
target to use the small code model should result in better codegen (comparable
with majority of other targets).
Large code models are also known for generating horrible code, for
example 16 bytes of code to load a single 8-byte value.
Signed-off-by: Andy-Python-Programmer <andypythonappdeveloper@gmail.com>
Do not allow JSON targets to set is-builtin: true
Note that this will affect (and make builds fail for) all of the projects out there that have target files invalid in this way. Crater, however, does not really cover these kinds of the codebases, so it is quite difficult to measure the impact. That said, the target files invalid in this way can start causing build failures each time LLVM is upgraded, anyway, so it is probably a good opportunity to disallow this property, entirely.
Another approach considered was to simply not parse this field anymore, which would avoid making the builds explicitly fail, but it wasn't clear to me if `is-builtin` was always set unintentionally… In case this was the case, I'd expect people to file a feature request stating specifically for what purpose they were using `is-builtin`.
Fixes#86017
Implementation is based off fast-float-rust, with a few notable changes.
- Some unsafe methods have been removed.
- Safe methods with inherently unsafe functionality have been removed.
- All unsafe functionality is documented and provably safe.
- Extensive documentation has been added for simpler maintenance.
- Inline annotations on internal routines has been removed.
- Fixed Python errors in src/etc/test-float-parse/runtests.py.
- Updated test-float-parse to be a library, to avoid missing rand dependency.
- Added regression tests for #31109 and #31407 in core tests.
- Added regression tests for #31109 and #31407 in ui tests.
- Use the existing slice primitive to simplify shared dec2flt methods
- Remove Miri ignores from dec2flt, due to faster parsing times.
- resolves#85198
- resolves#85214
- resolves#85234
- fixes#31407
- fixes#31109
- fixes#53015
- resolves#68396
- closes https://github.com/aldanor/fast-float-rust/issues/15
* Since the code model only applies to the code and not the data and the code model
only applies to functions you call through using `call`, `jmp` and data with `lea`, etc…
If you are calling functions using the function pointers from the UEFI structures the code
model does not apply in that case. It’s just related to the address space size of your own binary.
Since UEFI (uefi is all relocatable) uses relocatable PEs (relocatable code does not care about the
code model) so, we use the small code model here.
* Since applications don't usually take gigabytes of memory, setting the
target to use the small code model should result in better codegen (comparable
with majority of other targets).
Large code models are also known for generating horrible code, for
example 16 bytes of code to load a single 8-byte value.
* Use the LLVM default code model for the architecture for the
x86_64-unknown-uefi targets. For reference small is the default
code model on x86 in LLVM: <7de2173c2a/llvm/lib/Target/X86/X86TargetMachine.cpp (L204)>
* Remove the comments too as they are not UEFI-specific and applies
to pretty much any target. I added them before as I was explicitily
setting the code model to small.
Signed-off-by: Andy-Python-Programmer <andypythonappdeveloper@gmail.com>
Add initial implementation of HIR-based WF checking for diagnostics
During well-formed checking, we walk through all types 'nested' in
generic arguments. For example, WF-checking `Option<MyStruct<u8>>`
will cause us to check `MyStruct<u8>` and `u8`. However, this is done
on a `rustc_middle::ty::Ty`, which has no span information. As a result,
any errors that occur will have a very general span (e.g. the
definintion of an associated item).
This becomes a problem when macros are involved. In general, an
associated type like `type MyType = Option<MyStruct<u8>>;` may
have completely different spans for each nested type in the HIR. Using
the span of the entire associated item might end up pointing to a macro
invocation, even though a user-provided span is available in one of the
nested types.
This PR adds a framework for HIR-based well formed checking. This check
is only run during error reporting, and is used to obtain a more precise
span for an existing error. This is accomplished by individually
checking each 'nested' type in the HIR for the type, allowing us to
find the most-specific type (and span) that produces a given error.
The majority of the changes are to the error-reporting code. However,
some of the general trait code is modified to pass through more
information.
Since this has no soundness implications, I've implemented a minimal
version to begin with, which can be extended over time. In particular,
this only works for HIR items with a corresponding `DefId` (e.g. it will
not work for WF-checking performed within function bodies).
During well-formed checking, we walk through all types 'nested' in
generic arguments. For example, WF-checking `Option<MyStruct<u8>>`
will cause us to check `MyStruct<u8>` and `u8`. However, this is done
on a `rustc_middle::ty::Ty`, which has no span information. As a result,
any errors that occur will have a very general span (e.g. the
definintion of an associated item).
This becomes a problem when macros are involved. In general, an
associated type like `type MyType = Option<MyStruct<u8>>;` may
have completely different spans for each nested type in the HIR. Using
the span of the entire associated item might end up pointing to a macro
invocation, even though a user-provided span is available in one of the
nested types.
This PR adds a framework for HIR-based well formed checking. This check
is only run during error reporting, and is used to obtain a more precise
span for an existing error. This is accomplished by individually
checking each 'nested' type in the HIR for the type, allowing us to
find the most-specific type (and span) that produces a given error.
The majority of the changes are to the error-reporting code. However,
some of the general trait code is modified to pass through more
information.
Since this has no soundness implications, I've implemented a minimal
version to begin with, which can be extended over time. In particular,
this only works for HIR items with a corresponding `DefId` (e.g. it will
not work for WF-checking performed within function bodies).
Rollup of 7 pull requests
Successful merges:
- #87107 (Loop over all opaque types instead of looking at just the first one with the same DefId)
- #87158 (Suggest full enum variant for local modules)
- #87174 (Stabilize `[T; N]::map()`)
- #87179 (Mark `const_trait_impl` as active)
- #87180 (feat(rustdoc): open sidebar menu when links inside it are focused)
- #87188 (Add GUI test for auto-hide-trait-implementations setting)
- #87200 (TAIT: Infer all inference variables in opaque type substitutions via InferCx)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
TAIT: Infer all inference variables in opaque type substitutions via InferCx
The previous algorithm was correct for the example given in its
documentation, but when the TAIT was declared as a free item
instead of an associated item, the generic parameters were the
wrong ones.
cc `@spastorino`
r? `@nikomatsakis`
Loop over all opaque types instead of looking at just the first one with the same DefId
This exposed a bug in VecMap and is needed for https://github.com/rust-lang/rust/pull/86410 anyway
r? ``@spastorino``
cc ``@nikomatsakis``
The previous algorithm was correct for the example given in its
documentation, but when the TAIT was declared as a free item
instead of an associated item, the generic parameters were the
wrong ones.
Remove refs from Pat slices
Changes `PatKind::Or(&'hir [&'hir Pat<'hir>])` to `PatKind::Or(&'hir [Pat<'hir>])` and others. This is more consistent with `ExprKind`, saves a little memory, and is a little easier to use.
RFC2229: Use the correct place type
Closes https://github.com/rust-lang/rust/issues/87097
The ICE occurred because instead of looking at the type of the place after all the projections are applied, we instead looked at the `base_ty` of the Place to decide whether a discriminant should be read of not. This lead to two issues:
1. the kind of the type is not necessarily `Adt` since we only look at the `base_ty`, it could be instead `Ref` for example
2. if the kind of the type is `Adt` you could still be looking at the wrong variant to make a decision on whether the discriminant should be read or not
r? `@nikomatsakis`
Replace associated item bound vars with placeholders when projecting
Fixes#76407Fixes#76826
Similar, but more limited, to #85499. This allows us to handle things like `for<'a> <T as Trait>::Assoc<'a>` but not `for<'a> <T as Trait<'a>>::Assoc`, unblocking GATs.
r? `@nikomatsakis`
Add -Zfuture-incompat-test to assist with testing future-incompat reports.
This adds a `-Zfuture-incompat-test` cli flag to assist with testing future-incompatible reports. This flag causes all lints to be treated as a future-incompatible lint, and will emit a report for them. This is being added so that Cargo's testsuite can reliably test the reporting infrastructure. Right now, Cargo relies on using array_into_iter as a test subject. Since the breaking "future incompatible" lints are never intended to last forever, this means Cargo's testsuite would always need to keep changing to choose different lints (for example, #86330 proposed dropping that moniker for array_into_iter). With this flag, Cargo's tests can trigger any lint and check for the report.
Reuse CrateNum for proc-macro crates even when cross-compiling
Proc-macros are always compiled for the host, so this should be the same
in every way as recompiling the crate.
I am not sure why the previous code special-cased the target, since the
compiler properly gives an error when trying to load a crate for a
different host:
```
error[E0461]: couldn't find crate `dependency` with expected target triple x86_64-unknown-linux-gnu
--> /home/joshua/rustc4/src/test/ui/cfg-dependent.rs:8:2
|
LL | dependency::is_64();
| ^^^^^^^^^^
|
= note: the following crate versions were found:
crate `dependency`, target triple i686-unknown-linux-gnu: /home/joshua/rustc4/build/x86_64-unknown-linux-gnu/test/ui/cfg-dependent/auxiliary/libdependency.so
```
I think another possible fix is to remove the check altogether. But I'm
not sure, and this fix works, so I'm not making the larger change here.
Fixes https://github.com/rust-lang/rust/issues/56935.
r? `@petrochenkov` cc `@alexcrichton`
Proc-macros are always compiled for the host, so this should be the same
in every way as recompiling the crate.
I am not sure why the previous code special-cased the target, since the
compiler properly gives an error when trying to load a crate for a
different host:
```
error[E0461]: couldn't find crate `dependency` with expected target triple x86_64-unknown-linux-gnu
--> /home/joshua/rustc4/src/test/ui/cfg-dependent.rs:8:2
|
LL | dependency::is_64();
| ^^^^^^^^^^
|
= note: the following crate versions were found:
crate `dependency`, target triple i686-unknown-linux-gnu: /home/joshua/rustc4/build/x86_64-unknown-linux-gnu/test/ui/cfg-dependent/auxiliary/libdependency.so
```
I think another possible fix is to remove the check altogether. But I'm
not sure, and this fix works, so I'm not making the larger change here.
expand: Support helper attributes for built-in derive macros
This is needed for https://github.com/rust-lang/rust/pull/86735 (derive macro `Default` should have a helper attribute `default`).
With this PR we can specify helper attributes for built-in derives using syntax `#[rustc_builtin_macro(MacroName, attributes(attr1, attr2, ...))]` which mirrors equivalent syntax for proc macros `#[proc_macro_derive(MacroName, attributes(attr1, attr2, ...))]`.
Otherwise expansion infra was already ready for this.
The attribute parsing code is shared between proc macro derives and built-in macros (`fn parse_macro_name_and_helper_attrs`).
This resolves all the problems we had around "normalizing" the representation of a Scalar in case it carries a Pointer value: we can just use Pointer if we want to have a value taht we are sure is already normalized.
Handle non-integer const generic parameters in debuginfo type names.
This PR fixes an ICE introduced by https://github.com/rust-lang/rust/pull/85269 which started emitting const generic arguments for debuginfo names but did not cover the case where such an argument could not be evaluated to a flat string of bits.
The fix implemented in this PR is very basic: If `try_eval_bits()` fails for the constant in question, we fall back to generating a stable hash of the constant and emit that instead. This way we get a (virtually) unique name and side step the problem of generating a string representation of a potentially complex value.
The downside is that the generated name will be rather opaque. E.g. the regression test adds a function `const_generic_fn_non_int<()>` which is then rendered as `const_generic_fn_non_int<{CONST#fe3cfa0214ac55c7}>`. I think it's an open question how to deal with this more gracefully.
I'd be interested in ideas on how to do this better.
r? `@wesleywiser`
cc `@dpaoliello` (do you see any problems with this approach?)
cc `@Mark-Simulacrum` & `@nagisa` (who I've seen comment on debuginfo issues recently -- anyone else?)
Fixes https://github.com/rust-lang/rust/issues/86893
Rollup of 6 pull requests
Successful merges:
- #87085 (Search result colors)
- #87090 (Make BTreeSet::split_off name elements like other set methods do)
- #87098 (Unignore some pretty printing tests)
- #87099 (Upgrade `cc` crate to 1.0.69)
- #87101 (Suggest a path separator if a stray colon is found in a match arm)
- #87102 (Add GUI test for "go to first" feature)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
When building with profile-generate request that metadata is kept
during the gc_sections call, as this can sometimes strip out profile
data.
This missing information in the prof files can then result in missing
functions when using the profile information.
Avoid cloning ExpnData to access Span edition
ExpnData is a fairly hefty structure to clone; cloning it may not be cheap. In
some cases this may get optimized out, but it's not clear that will always be
the case. Try to avoid that cost.
r? `@ghost` -- opening for a perf run to start with
Fix internal `default_hash_types` lint to use resolved path
I run into false positives now and then (mostly in Clippy) when I want to name some util after HashMap.
ExpnData is a fairly hefty structure to clone; cloning it may not be cheap. In
some cases this may get optimized out, but it's not clear that will always be
the case. Try to avoid that cost.
target abi
Implement cfg(target_abi) (RFC 2992)
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
Update targets to use `target_abi`
All eabi targets have `target_abi = "eabi".`
All eabihf targets have `target_abi = "eabihf"`.
`armv6_unknown_freebsd` and `armv7_unknown_freebsd` have `target_abi = "eabihf"`.
All abi64 targets have `target_abi = "abi64"`.
All ilp32 targets have `target_abi = "ilp32"`.
All softfloat targets have `target_abi = "softfloat"`.
All *-uwp-windows-* targets have `target_abi = "uwp"`.
All spe targets have `target_abi = "spe"`.
All macabi targets have `target_abi = "macabi"`.
aarch64-apple-ios-sim has `target_abi = "sim"`.
`x86_64-fortanix-unknown-sgx` has `target_abi = "fortanix"`.
`x86_64-unknown-linux-gnux32` has `target_abi = "x32"`.
Add FIXME entries for targets for which existing values need to change
once `cfg_target_abi` becomes stable. (All of them are tier 3 targets.)
Add a test for `target_abi` in `--print cfg`.
Implement Mutation- and BorrowOfLayoutConstrainedField in thir-unsafeck
Since nobody has so far claimed Mutation- and BorrowOfLayoutConstrainedField in rust-lang/project-thir-unsafeck#7, I have taken the liberty of implementing them in thir-unsafeck.
r? `@LeSeulArtichaut`
CTFE engine: small cleanups
I noticed these while preparing a large PR, and figured I'd better send them ahead to not muddy the diff unnecessarily.
- remove remaining use of Pointer in Allocation API (I missed those in https://github.com/rust-lang/rust/pull/85472)
- remove unnecessary deallocate_local hack (this logic does not seem necessary any more)
r? `@oli-obk`
Simplify future incompatible reporting.
This simplifies the implementation of the future incompatible reporting system. Instead of having a separate field in the future_incompatible definition, this reuses the `FutureIncompatibilityReason` enum. It also drops the "date" field. Cargo does not use the date field, and there isn't much of a need for this to be structured, and I am skeptical that the date can be predicted reliably. The date or release version can be listed in the lint text if desired.
Fix ICE with unsized type in const pattern
Fixes#87046. The `deref_const()` query currently contains the following check:
e9a387d6cf/compiler/rustc_mir/src/const_eval/mod.rs (L191-L204)
i.e. this will cause an ICE for every unsized type except slices. An error is reported with my changes if such a type is used as a const pattern (this should not be a breaking change, since so far, this has caused an ICE).
Improve error reporting for modifications behind `&` references
I had a look at #84210 and noticed that #85823 has effectively already fixed#84210.
However, the string matching in #85823 is _very_ crude and already breaks down when a variable name starts with `mut`. I have made this a bit more robust; further improvements could definitely be made but are complicated by the lack of information provided by an earlier pass:
ce331ee6ee/compiler/rustc_mir_build/src/build/matches/mod.rs (L2103-L2107)
I have also fixed a missing comma in the error message.
Report an error if resolution of closure call functions failed
This pull request fixes#86238. The current implementation seems to assume that resolution of closure call functions (I'm not sure what the proper term is; I mean `call` of `Fn` etc.) can never fail:
60f1a2fc4b/compiler/rustc_typeck/src/check/callee.rs (L590-L595)
But actually, it can, if the `fn`/`fn_mut`/`fn_once` lang items are not defined, or don't have an associated `call`/`call_mut`/`call_once` function, leading to the ICE described in #86238. I have therefore turned the `span_bug!()` into an error message, which prevents the ICE.
Do not suggest adding a semicolon after `?`
Fixes#87051. I have only modified `report_return_mismatched_types()`, i.e. my changes only affect suggestions to add `;` for return type mismatches, but this never makes sense after `?`, because the function cannot return `()` if `?` is used (it has to return a `Result` or an `Option`), and a semicolon won't help if the expected and actual `Err` types differ, even if the expected one is `()`.
Stabilize "RangeFrom" patterns in 1.55
Implements a partial stabilization of #67264 and #37854.
Reference PR: https://github.com/rust-lang/reference/pull/900
# Stabilization Report
This stabilizes the `X..` pattern, shown as such, offering an exhaustive match for unsigned integers:
```rust
match x as u32 {
0 => println!("zero!"),
1.. => println!("positive number!"),
}
```
Currently if a Rust author wants to write such a match on an integer, they must use `1..={integer}::MAX` . By allowing a "RangeFrom" style pattern, this simplifies the match to not require the MAX path and thus not require specifically repeating the type inside the match, allowing for easier refactoring. This is particularly useful for instances like the above case, where different behavior on "0" vs. "1 or any positive number" is desired, and the actual MAX is unimportant.
Notably, this excepts slice patterns which include half-open ranges from stabilization, as the wisdom of those is still subject to some debate.
## Practical Applications
Instances of this specific usage have appeared in the compiler:
16143d1067/compiler/rustc_middle/src/ty/inhabitedness/mod.rs (L219)673d0db5e3/compiler/rustc_ty_utils/src/ty.rs (L524)
And I have noticed there are also a handful of "in the wild" users who have deployed it to similar effect, especially in the case of rejecting any value of a certain number or greater. It simply makes it much more ergonomic to write an irrefutable match, as done in Katholieke Universiteit Leuven's [SCALE and MAMBA project](05e5db00d5/WebAssembly/scale_std/src/fixed_point.rs (L685-L695)).
## Tests
There were already many tests in [src/test/ui/half-open-range/patterns](90a2e5e3fe/src/test/ui/half-open-range-patterns), as well as [generic pattern tests that test the `exclusive_range_pattern` feature](673d0db5e3/src/test/ui/pattern/usefulness/integer-ranges/reachability.rs), many dating back to the feature's introduction and remaining standing to this day. However, this stabilization comes with some additional tests to explore the... sometimes interesting behavior of interactions with other patterns. e.g. There is, at least, a mild diagnostic improvement in some edge cases, because before now, the pattern `0..=(5+1)` encounters the `half_open_range_patterns` feature gate and can thus emit the request to enable the feature flag, while also emitting the "inclusive range with no end" diagnostic. There is no intent to allow an `X..=` pattern that I am aware of, so removing the flag request is a strict improvement. The arrival of the `J | K` "or" pattern also enables some odd formations.
Some of the behavior tested for here is derived from experiments in this [Playground](https://play.rust-lang.org/?version=nightly&mode=debug&edition=2018&gist=58777b3c715c85165ac4a70d93efeefc) example, linked at https://github.com/rust-lang/rust/issues/67264#issuecomment-812770692, which may be useful to reference to observe the current behavior more closely.
In addition tests constituting an explanation of the "slicing range patterns" syntax issue are included in this PR.
## Desiderata
The exclusive range patterns and half-open range patterns are fairly strongly requested by many authors, as they make some patterns much more natural to write, but there is disagreement regarding the "closed" exclusive range pattern or the "RangeTo" pattern, especially where it creates "off by one" gaps in the presence of a "catch-all" wildcard case. Also, there are obviously no range analyses in place that will force diagnostics for e.g. highly overlapping matches. I believe these should be warned on, ideally, and I think it would be reasonable to consider such a blocker to stabilizing this feature, but there is no technical issue with the feature as-is from the purely syntactic perspective as such overlapping or missed matches can already be generated today with such a catch-all case. And part of the "point" of the feature, at least from my view, is to make it easier to omit wildcard matches: a pattern with such an "open" match produces an irrefutable match and does not need the wild card case, making it easier to benefit from exhaustiveness checking.
## History
- Implemented:
- Partially via exclusive ranges: https://github.com/rust-lang/rust/pull/35712
- Fully with half-open ranges: https://github.com/rust-lang/rust/pull/67258
- Unresolved Questions:
- The precedence concerns of https://github.com/rust-lang/rust/pull/48501 were considered as likely requiring adjustment but probably wanting a uniform consistent change across all pattern styles, given https://github.com/rust-lang/rust/issues/67264#issuecomment-720711656, but it is still unknown what changes might be desired
- How we want to handle slice patterns in ranges seems to be an open question still, as witnessed in the discussion of this PR!
I checked but I couldn't actually find an RFC for this, and given "approved provisionally by lang team without an RFC", I believe this might require an RFC before it can land? Unsure of procedure here, on account of this being stabilizing a subset of a feature of syntax.
r? `@scottmcm`
Improves migrations lint for RFC2229
This PR improves the current disjoint capture migration lint by providing more information on why drop order or auto trait implementation for a closure is impacted by the use of the new feature.
The drop order migration lint will now look something like this:
```
error: changes to closure capture in Rust 2021 will affect drop order
--> $DIR/significant_drop.rs:163:21
|
LL | let c = || {
| ^^
...
LL | tuple.0;
| ------- in Rust 2018, closure captures all of `tuple`, but in Rust 2021, it only captures `tuple.0`
...
LL | }
| - in Rust 2018, `tuple` would be dropped here, but in Rust 2021, only `tuple.0` would be dropped here alongside the closure
```
The auto trait migration lint will now look something like this:
```
error: changes to closure capture in Rust 2021 will affect `Send` trait implementation for closure
--> $DIR/auto_traits.rs:14:19
|
LL | thread::spawn(move || unsafe {
| ^^^^^^^^^^^^^^ in Rust 2018, this closure would implement `Send` as `fptr` implements `Send`, but in Rust 2021, this closure would no longer implement `Send` as `fptr.0` does not implement `Send`
...
LL | *fptr.0 = 20;
| ------- in Rust 2018, closure captures all of `fptr`, but in Rust 2021, it only captures `fptr.0`
```
r? `@nikomatsakis`
Closes https://github.com/rust-lang/project-rfc-2229/issues/54
Add clobber-only register classes for asm!
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
- The `Rustc::expn_id` field kept redundant information
- `SyntaxContext` is no longer thrown away before `save_proc_macro_span` because it's thrown away during metadata encoding anyway
Improve opaque pointers support
Opaque pointers are coming, and rustc is not ready.
This adds partial support by passing an explicit load type to LLVM. Two issues I've encountered:
* The necessary type was not available at the point where non-temporal copies were generated. I've pushed the code for that upwards out of the memcpy implementation and moved the position of a cast to make do with the types we have available. (I'm not sure that cast is needed at all, but have retained it in the interest of conservativeness.)
* The `PlaceRef::project_deref()` function used during debuginfo generation seems to be buggy in some way -- though I haven't figured out specifically what it does wrong. Replacing it with `load_operand().deref()` did the trick, but I don't really know what I'm doing here.
remove const_raw_ptr_to_usize_cast feature
This feature currently has the strange status of "const-only `unsafe`", which was an experiment that we no longer think is a good idea. We need to find better ways to enable things like "messing with the low bits of a pointer" during CTFE.
r? `@oli-obk`
Fix several ICEs related to malformed `#[repr(...)]` attributes
This PR fixes#83921. #83921 actually contains two related but distinct issues (one of them incorrectly reported as a duplicate in https://github.com/rust-lang/rust/issues/83921#issuecomment-814640734):
In the first, a call to `delay_span_bug` leads to an ICE when compiling with `-Zunpretty=everybody_loops` (and some other pretty-printing modes), because the corresponding error is emitted in a later pass, which does not run when only pretty-printing is requested.
The second issue is about parsing `#[repr(...)]` attributes. Currently, all of the following cause an ICE when applied to a struct/enum:
```rust
#[repr(packed())]
#[repr(align)]
#[repr(align(2, 4))]
#[repr(align())]
#[repr(i8())]
#[repr(u32(42))]
#[repr(i64 = 2)]
```
I have fixed this by expanding the well-formedness checks in `find_repr_attrs()`.
Revert the revert of renaming traits::VTable to ImplSource
As #72114 and #73055 were merged so closely together I think this
accidentally happened while rebasing
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
Support forwarding caller location through trait object method call
Since PR #69251, the `#[track_caller]` attribute has been supported on
traits. However, it only has an effect on direct (monomorphized) method
calls. Calling a `#[track_caller]` method on a trait object will *not*
propagate caller location information - instead, `Location::caller()` will
return the location of the method definition.
This PR forwards caller location information when `#[track_caller]` is
present on the method definition in the trait. This is possible because
`#[track_caller]` in this position is 'inherited' by any impls of that
trait, so all implementations will have the same ABI.
This PR does *not* change the behavior in the case where
`#[track_caller]` is present only on the impl of a trait.
While all implementations of the method might have an explicit
`#[track_caller]`, we cannot know this at codegen time, since other
crates may have impls of the trait. Therefore, we keep the current
behavior of not forwarding the caller location, ensuring that all
implementations of the trait will have the correct ABI.
See the modified test for examples of how this works
If crate declares `rust_eh_personality`, re-use existing declaration
as otherwise attempts to set function attributes that follow the
declaration will fail (unless it happens to have exactly the same
type signature as the one predefined in the compiler).
only check cg defaults wf once instantiated
the previous fixmes here didn't make too much sense as I didn't yet fully understand the code further below.
That code only runs if the predicates using our generic param default are fully concrete after substituting our default, which never happens if our default is generic.
r? `@oli-obk` `@BoxyUwU`
Remove `missing_docs` lint on private 2.0 macros
798baebde1/compiler/rustc_lint/src/builtin.rs (L573-L584)
This code is the source of #57569. The problem is subtle, so let me point it out. This code makes the mistake of assuming that all of the macros in `krate.exported_macros` are exported.
...Yeah. For some historical reason, all `macro` macros are marked as exported, regardless of whether they actually are, which is dreadfully confusing. It would be more accurate to say that `exported_macros` currently contains only macros that have paths.
This PR renames `exported_macros` to `importable_macros`, since these macros can be imported with `use` while others cannot. It also fixes the code above to no longer lint on private `macro` macros, since the `missing_docs` lint should only appear on exported items.
Fixes#57569.
Add support for raw-dylib with stdcall, fastcall functions
Next stage of work for #58713: allow `extern "stdcall"` and `extern "fastcall"` with `#[link(kind = "raw-dylib")]`.
I've deliberately omitted support for vectorcall, as that doesn't currently work, and I wanted to get this out for review. (I haven't really investigated the vectorcall failure much yet, but at first (very cursory) glance it appears that the problem is elsewhere.)
Simply shift the bitcast from the store to the load, so that
we can use the destination type. I'm not sure the bitcast is
really necessary, but keeping it for now.
I'm not really sure what is wrong here, but I was getting load
type mismatches in the debuginfo code (which is the only place
using this function).
Replacing the project_deref() implementation with a generic
load_operand + deref did the trick.
This makes load generation compatible with opaque pointers.
The generation of nontemporal copies still accesses the pointer
element type, as fixing this requires more movement.
- Closures in external crates may get compiled in because of
monomorphization. We should store names of captured variables
in `optimized_mir`, so that they are written into the metadata
file and we can use them to generate debuginfo.
- If there are breakpoints inside closures, the names of captured
variables stored in `optimized_mir` can be used to print them.
Now the name is more precise when disjoint fields are captured.
Previously, debuggers print closures as something like
```
y::main::closure-0 (0x7fffffffdd34)
```
The pointer actually references to an upvar. It is not
very obvious, especially for beginners.
It's because upvars don't have names before, as they
are packed into a tuple. This commit names the upvars,
so we can expect to see something like
```
y::main::closure-0 {_captured_ref__b: 0x[...]}
```
Use #[track_caller] in const panic diagnostics.
This change stops const panic diagnostics from reporting inside #[track_caller] functions by skipping over them.
Change linked tracking issue for more_qualified_paths
This updates the linked tracking issue for the `more_qualified_paths` feature from the implementation PR #80080 to an actual tracking issue #86935.
Fix double warning about illegal floating-point literal pattern
This PR fixes#86600. The problem is that the `ConstToPat` struct contains a field `include_lint_checks`, which determines whether lints should be emitted or not, but this field is currently not obeyed at one point, leading to a warning being emitted more than once. I have fixed this behavior here.
Account for capture kind in auto traits migration
Modifies the current auto traits migration for RFC2229 so it takes into account capture kind
Closes https://github.com/rust-lang/project-rfc-2229/issues/51
r? `@nikomatsakis`
2229: Reduce the size of closures with `capture_disjoint_fields`
One key observation while going over the closure size profile of rustc
was that we are disjointly capturing one or more fields starting at an
immutable reference.
Disjoint capture over immutable reference doesn't add too much value
because the fields can either be borrowed immutably or copied.
One possible edge case of the optimization is when a fields of a struct
have a longer lifetime than the structure, therefore we can't completely
get rid of all the accesses on top of sharef refs, only the rightmost
one. Here is a possible example:
```rust
struct MyStruct<'a> {
a: &'static A,
b: B,
c: C<'a>,
}
fn foo<'a, 'b>(m: &'a MyStruct<'b>) -> impl FnMut() + 'static {
let c = || drop(&*m.a.field_of_a);
// Here we really do want to capture `*m.a` because that outlives `'static`
// If we capture `m`, then the closure no longer outlives `'static'
// it is constrained to `'a`
}
```
r? `@nikomatsakis`
- Add `:Sized` assertion in interpreter impl
- Use `Scalar::from_bool` instead of `ScalarInt: From<bool>`
- Remove unneeded comparison in intrinsic typeck
- Make this UB to call with undef, not just return undef in that case
LLVM target name does not necessarily match the Rust target name and it
can be confusing when the ICE message is describing a target other than
has been specified on the command line.
Checking that function is const if marked with rustc_const_unstable
Fixes#69630
This one is still missing tests to check the behavior but I checked by hand and it seemed to work.
I would not mind some direction for writing those unit tests!
Use diagnostic items instead of lang items for rfc2229 migrations
This PR removes the `Send`, `UnwindSafe` and `RefUnwindSafe` lang items introduced in https://github.com/rust-lang/rust/pull/84730, and uses diagnostic items instead to check for `Send`, `UnwindSafe` and `RefUnwindSafe` traits for RFC2229 migrations.
r? ```@nikomatsakis```
remove trailing newline
fix: test with attribute but missing const
Update compiler/rustc_passes/src/stability.rs
Co-authored-by: Léo Lanteri Thauvin <leseulartichaut@gmail.com>
Add test for extern functions
fix: using span_help instead of span_suggestion
add test for some ABIs + fmt fix
Update compiler/rustc_passes/src/stability.rs
Co-authored-by: Léo Lanteri Thauvin <leseulartichaut@gmail.com>
Refractor and add test for `impl const`
Add test to make sure no output + cleanup condition
-----------------------------
remove stdcall test, failing CI test
C abi is already tested in this, so it is not that useful to test another one.
The tested code is blind to which specific ABI for now, as long as it's not an intrinsic one
Fix ICE when misplaced visibility cannot be properly parsed
Fixes#86895
The issue was that a failure to parse the visibility was causing the original error to be dropped before being emitted.
The resulting error isn't quite as nice as when the visibility is parsed properly, but I'm not sure which error to prioritize here. Displaying both errors might be too confusing.
r? ```@estebank```
Sync rustc_codegen_cranelift
The main hightlight this sync is basic support for AArch64. Most things should work on Linux, but there does seem to be an ABI incompatibility causing proc-macros to crash, see https://github.com/bjorn3/rustc_codegen_cranelift/issues/1184. Thanks to ```@afonso360``` for implementing all Cranelift features that were necessary to compile for AArch64 using cg_clif. Also thanks to ```@shamatar``` for implementing the `llvm.x86.addcarry.64` and `llvm.x86.subborrow.64` llvm intrinsics used by num-bigint (https://github.com/bjorn3/rustc_codegen_cranelift/pull/1178) and ```@eggyal``` for implementing multi-threading support for the lazy jit mode. (https://github.com/bjorn3/rustc_codegen_cranelift/pull/1166)
r? ```@ghost```
```@rustbot``` label +A-codegen +A-cranelift +T-compiler
Recover from `&dyn mut ...` parse errors
Consider this example:
```rust
fn main() {
let r: &dyn mut Trait;
}
```
This currently leads to:
```
error: expected one of `!`, `(`, `;`, `=`, `?`, `for`, lifetime, or path, found keyword `mut`
--> src/main.rs:2:17
|
2 | let r: &dyn mut Trait;
| ^^^ expected one of 8 possible tokens
error: aborting due to previous error
```
However, especially for beginners, I think it is easy to get `&dyn mut` and `&mut dyn` confused. With my changes, I get a help message, and the parser even recovers:
```
error: `mut` must precede `dyn`
--> test.rs:2:12
|
2 | let r: &dyn mut Trait;
| ^^^^^^^^ help: place `mut` before `dyn`: `&mut dyn`
error[E0405]: cannot find trait `Trait` in this scope
--> test.rs:2:21
|
2 | let r: &dyn mut Trait;
| ^^^^^ not found in this scope
error: aborting due to 2 previous errors
```
Support lint tool names in rustc command line options
When rustc is running without a lint tool such as clippy enabled, options for lints such as `clippy::foo` are meant to be ignored. This was already working for those specified by attrs, such as `#![allow(clippy::foo)]`, but this did not work for command line arguments like `-A clippy::foo`. This PR fixes that issue.
Note that we discovered this issue while discussing https://github.com/rust-lang/cargo/issues/5034.
Fixes#86628.
This change merges `check_lint_and_tool_name` into `check_lint_name` in
order to avoid having two very similar functions.
Also adds the `.stderr` file back for the test case, since apparently
it is still needed.
All eabi targets have target_abi = "eabi".
All eabihf targets have target_abi = "eabihf".
armv6_unknown_freebsd and armv7_unknown_freebsd have target_abi = "eabihf".
All abi64 targets have target_abi = "abi64".
All ilp32 targets have target_abi = "ilp32".
All softfloat targets have target_abi = "softfloat".
All *-uwp-windows-* targets have target_abi = "uwp".
All spe targets have target_abi = "spe".
All macabi targets have target_abi = "macabi".
aarch64-apple-ios-sim has target_abi = "sim".
x86_64-fortanix-unknown-sgx has target_abi = "fortanix".
x86_64-unknown-linux-gnux32 has target_abi = "x32".
Add FIXME entries for targets for which existing values need to change
once cfg_target_abi becomes stable. (All of them are tier 3 targets.)
Add a test for target_abi in `--print cfg`.
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
This does not add an abi to any existing target.
Rename some Rust 2021 lints to better names
Based on conversation in https://github.com/rust-lang/rust/issues/85894.
Rename a bunch of Rust 2021 related lints:
Lints that are officially renamed because they are already in beta or stable:
* `disjoint_capture_migration` => `rust_2021_incompatible_closure_captures`
* `or_patterns_back_compat` => `rust_2021_incompatible_or_patterns`
* `non_fmt_panic` => `non_fmt_panics`
Lints that are renamed but don't require any back -compat work since they aren't yet in stable:
* `future_prelude_collision` => `rust_2021_prelude_collisions`
* `reserved_prefix` => `rust_2021_token_prefixes`
Lints that have been discussed but that I did not rename:
* ~`non_fmt_panic` and `bare_trait_object`: is making this plural worth the headache we might cause users?~
* `array_into_iter`: I'm unsure of a good name and whether bothering users with a name change is worth it.
r? `@nikomatsakis`
Refactor linker code
This merges `LinkerInfo` into `CrateInfo` as there is no reason to keep them separate. `LinkerInfo::to_linker` is merged into `get_linker` as both have different logic for each linker type and `to_linker` is directly called after `get_linker`. Also contains a couple of small cleanups.
See the individual commits for all changes.
The `large_assignments` lints detects moves over specified limit. The
limit is configured through `move_size_limit = "N"` attribute placed at
the root of a crate. When attribute is absent, the lint is disabled.
Make it possible to enable the lint without making any changes to the
source code, through a new flag `-Zmove-size-limit=N`. For example, to
detect moves exceeding 1023 bytes in a cargo crate, including all
dependencies one could use:
```
$ env RUSTFLAGS=-Zmove-size-limit=1024 cargo build -vv
```
Replace per-target ABI denylist with an allowlist
It makes very little sense to maintain denylists of ABIs when, as far as
non-generic ABIs are concerned, targets usually only support a small
subset of the available ABIs.
This has historically been a cause of bugs such as us allowing use of
the platform-specific ABIs on x86 targets – these in turn would cause
LLVM errors or assertions to fire.
In this PR we got rid of the per-target ABI denylists, and instead compute
which ABIs are supported with a simple match based on, mostly, the
`Target::arch` field. Among other things, this makes it impossible to
forget to consider this problem (in either direction) and forces one to
consider what the ABI support looks like when adding an ABI (rarely)
rather than target (often), which should hopefully also reduce the
cognitive load on both contributors as well as reviewers.
Fixes#57182
Sponsored by: standard.ai
---
## Summary for teams
One significant user-facing change after this PR is that there's now a future compat warning when building…
* `stdcall`, `fastcall`, `thiscall` using code with targets other than 32-bit x86 (i386...i686) or *-windows-*;
* `vectorcall` using code when building for targets other than x86 (either 32 or 64 bit) or *-windows-*.
Previously these ABIs have been accepted much more broadly, even for architectures and targets where this made no sense (e.g. on wasm32) and would fall back to the C ABI. In practice this doesn't seem to be used too widely and the [breakages in crater](https://github.com/rust-lang/rust/pull/86231#issuecomment-866300943) that we see are mostly about Windows-specific code that was missing relevant `cfg`s and just happened to successfully `check` on Linux for one reason or another.
The intention is that this warning becomes a hard error after some time.
It makes very little sense to maintain denylists of ABIs when, as far as
non-generic ABIs are concerned, targets usually only support a small
subset of the available ABIs.
This has historically been a cause of bugs such as us allowing use of
the platform-specific ABIs on x86 targets – these in turn would cause
LLVM errors or assertions to fire.
Fixes#57182
Sponsored by: standard.ai
Query-ify global limit attribute handling
Currently, we read various 'global limits' from inner attributes the crate root (`recursion_limit`, `move_size_limit`, `type_length_limit`, `const_eval_limit`). These limits are then stored in `Sessions`, allowing them to be access from a `TyCtxt` without registering a dependency on the crate root attributes.
This PR moves the calculation of these global limits behind queries, so that we properly track dependencies on crate root attributes. During the setup of macro expansion (before we've created a `TyCtxt`), we need to access the recursion limit, which is now done by directly calling into the code shared by the normal query implementations.
E0716: clarify that equivalent code example is erroneous
In E0716, there is a code block that is equivalent to the erroneous
code example. Especially when viewed with `rustc --explain`, it's
not obvious that it is also erroneous, and some users have been
confused when they try to change their code to match the erroneous
equivalent.
`@rustbot` label +A-diagnostics +D-newcomer-roadblock +T-compiler
Hack: Ignore inference variables in certain queries
Fixes#84841Fixes#86753
Some queries are not built to accept types with inference variables, which can lead to ICEs. These queries probably ought to be converted to canonical form, but as a quick workaround, we can return conservative results in the case that inference variables are found.
We should file a follow-up issue (and update the FIXMEs...) to do the proper refactoring.
cc `@arora-aman`
r? `@oli-obk`
In E0716, there is a code block that is equivalent to the erroneous
code example. Especially when viewed with `rustc --explain`, it's
not obvious that it is also erroneous, and some users have been
confused when they try to change their code to match the erroneous
equivalent.
Support allocation failures when interpreting MIR
This closes#79601 by handling the case where memory allocation fails during MIR interpretation, and translates that failure into an `InterpError`. The error message is "tried to allocate more memory than available to compiler" to make it clear that the memory shortage is happening at compile-time by the compiler itself, and that it is not a runtime issue.
Now that memory allocation can fail, it would be neat if Miri could simulate low-memory devices to make it easy to see how much memory a Rust program needs.
Note that this breaks Miri because it assumes that allocation can never fail.
Warn when `rustdoc::` group is omitted from lint names
When rustdoc lints were first made a tool lint, they gave an unconditional warning when you used the original name:
```
warning: lint `broken_intra_doc_links` has been renamed to `rustdoc::broken_intra_doc_links`
--> $DIR/renamed-lint-still-applies.rs:2:9
|
LL | #![deny(broken_intra_doc_links)]
| ^^^^^^^^^^^^^^^^^^^^^^ help: use the new name: `rustdoc::broken_intra_doc_links`
|
= note: `#[warn(renamed_and_removed_lints)]` on by default
```
That was reverted in https://github.com/rust-lang/rust/pull/83203 because adding `rustdoc::x` lints would cause the code to break on old versions of the compiler (due to https://github.com/rust-lang/rust/issues/66079#issuecomment-788589193, "fixed" in https://github.com/rust-lang/rust/pull/83216 in the sense that you can now opt-in to not breaking on nightly, which is not ideal but `register_tool` is a long way from stabilizing). Since https://github.com/rust-lang/rust/pull/80527 is now on 1.52.0 stable, we can re-enable the warning. For nightly users, they can change immediately and still have their code work on stable; for stable users, they can change their code in 12 weeks and still have it work up to 3 releases back (about 18 weeks). That seems reasonable to me.
r? `@Manishearth` cc `@rust-lang/rustdoc`
Return `EvaluatedToOk` when type in outlives predicate is global
A global type doesn't reference any local regions or types, so it's
guaranteed to outlive any region.
Avoid byte to char position conversions in `is_multiline`
Converting a byte position into a char position is currently linear in
the number of multibyte characters in the source code. Avoid it when
checking if a range spans across lines.
This makes it feasible to compile source files with a large number of
multibyte characters.
deny using default function in impl const Trait
Fixes#79450.
I don't know if my implementation is correct:
- The check is in `rustc_passes::check_const`, should I put it somewhere else instead?
- Is my approach (to checking the impl) optimal? It works for the current tests, but it might have some issues or there might be a better way of doing this.
Fix const-generics ICE related to binding
Fixes#83765, fixes#85848
r? `@jackh726` as you're familiar with `Binding`. I'd like to get some views if the current approach is right path.
Previously, only the fields would be displayed with no indication of the
variant name. If you already knew the enum was univariant, this was ok
but if the enum was univariant because of layout, for example, a
`Result<T, !>` then it could be very confusing which variant was the
active one.
Previously, directly tagged enums had a `variant$` field which would
show the name of the active variant. We now show the variant using a
`[variant]` synthetic item just like we do for niche-layout enums.
Rollup of 7 pull requests
Successful merges:
- #84029 (add `track_path::path` fn for usage in `proc_macro`s)
- #85001 (Merge `sys_common::bytestring` back into `os_str_bytes`)
- #86308 (Docs: clarify that certain intrinsics are not unsafe)
- #86796 (Add a regression test for issue-70703)
- #86803 (Remove & from Command::args calls in documentation)
- #86807 (Fix double import in wasm thread )
- #86813 (Add a help message to `unused_doc_comments` lint)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Add a help message to `unused_doc_comments` lint
Fixes#83492
This adds a help message to suggest a plain comment like the E0658 error. I've yet to come up with the best message about the doc attribute but the current shouldn't harm anything.
I was thinking of recovering in the `doc_comment_between_if_else` case, but I came to the conclusion that it unlikely happened and was an overkill.
add `track_path::path` fn for usage in `proc_macro`s
Adds a way to declare a dependency on external files without including them, to either re-trigger the build of a file as well as covering the use case of including dependencies within the `rustc` invocation, such that tools like `sccache`/`cachepot` are able to handle references to external files which are not included.
Ref #73921
Improve debug symbol names to avoid ambiguity and work better with MSVC's debugger
There are several cases where names of types and functions in the debug info are either ambiguous, or not helpful, such as including ambiguous placeholders (e.g., `{{impl}}`, `{{closure}}` or `dyn _'`) or dropping qualifications (e.g., for dynamic types).
Instead, each debug symbol name should be unique and useful:
* Include disambiguators for anonymous `DefPathDataName` (closures and generators), and unify their formatting when used as a path-qualifier vs item being qualified.
* Qualify the principal trait for dynamic types.
* If there is no principal trait for a dynamic type, emit all other traits instead.
* Respect the `qualified` argument when emitting ref and pointer types.
* For implementations, emit the disambiguator.
* Print const generics when emitting generic parameters or arguments.
Additionally, when targeting MSVC, its debugger treats many command arguments as C++ expressions, even when the argument is defined to be a symbol name. As such names in the debug info need to be more C++-like to be parsed correctly:
* Avoid characters with special meaning (`#`, `[`, `"`, `+`).
* Never start a name with `<` or `{` as this is treated as an operator.
* `>>` is always treated as a right-shift, even when parsing generic arguments (so add a space to avoid this).
* Emit function declarations using C/C++ style syntax (e.g., leading return type).
* Emit arrays as a synthetic `array$<type, size>` type.
* Include a `$` in all synthetic types as this is a legal character for C++, but not Rust (thus we avoid collisions with user types).
Implement printing of stack traces on LLVM segfaults and aborts
Implement #79153
Based on discussion, try to extend the rust_backtrace=1 feature to handle segfault or aborts in the llvm backend
Include terminators in instance size estimate
For example, drop glue generated for struct below, doesn't have any
statements, only terminators. Previously it received an estimate of 0,
the new estimate is 13 (6+5 drop terminators, +1 resume, +1 return).
```rust
struct S {
a: String,
b: String,
c: String,
d: String,
e: String,
f: String,
}
```
Originally reported in https://github.com/rust-lang/rust/issues/69382#issue-569392141
Check the number of generic lifetime and const parameters of intrinsics
This pull request fixes#85855. The current code for type checking intrinsics only checks the number of generic _type_ parameters, but does not check for an incorrect number of lifetime or const parameters, which can cause problems later on, such as the ICE in #85855, where the code thought that it was looking at a type parameter but found a lifetime parameter:
```
error: internal compiler error: compiler/rustc_middle/src/ty/generics.rs:188:18:
expected type parameter, but found another generic parameter
```
The changes in this PR add checks for the number of lifetime and const parameters, expand the scope of `E0094` to also apply to these cases, and improve the error message by properly pluralizing the number of expected generic parameters.
Also an fix issue with tuple type names where we can't cast to them in
natvis (required by the visualizer for `HashMap`) because of
peculiarities with the natvis expression evaluator.
For example, drop glue generated for struct below, doesn't have any
statements, only terminators. Previously it received an estimate of 0,
the new estimate is 13 (6+5 drop terminators, +1 resume, +1 return).
struct S {
a: String,
b: String,
c: String,
d: String,
e: String,
f: String,
}
Originally reported in https://github.com/rust-lang/rust/issues/69382#issue-569392141
Converting a byte position into a char position is currently linear in
the number of multibyte characters in the source code. Avoid it when
checking if a range spans across lines.
This makes it feasible to compile source files with a large number of
multibyte characters.
Fix misleading "impl Trait" error
The kinds can't be compared directly, as types with references are treated as different because the lifetimes aren't bound in ty, but are in expected.
Closes#84160
Add support for leaf function frame pointer elimination
This PR adds ability for the target specifications to specify frame
pointer emission type that's not just “always” or “whatever cg decides”.
In particular there's a new mode that allows omission of the frame
pointer for leaf functions (those that don't call any other functions).
We then set this new mode for Aarch64-based Apple targets.
Fixes#86196
rustc_span: Explicitly handle crates that differ from package names
The sha-1 and md-5 packages contain crates named sha1 and md5,
respectively. This discrepancy makes it somewhat more challenging to
automate detection of unused crates. Explicitly rename the packages to
the names of the crates they contain, to simplify such detection.
Add suggestions for "undefined reference" link errors
This adds a suggestion for "undefined reference to ..." linking errors to install or specify the location to an external library. Since there is no defined error format for linkers, we just check if there was a failure and if that failure contains the string `undefined reference to`. This also makes it impossible to test this, since the output depends on the system linker. The output now looks like:
```
error: linking with `cc` failed: exit status: 1
|
= note: "cc" "-m64" "linking_failure.linking_failure.7rcbfp3g-cgu.0.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.1.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.2.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.3.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.4.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.5.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.6.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.7.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.8.rcgu.o" "linking_failure.53u64zklswtfazes.rcgu.o" "-Wl,--as-needed" "-L" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib" "-Wl,--start-group" "-Wl,-Bstatic" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libstd-01ce3ba5c629d02f.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libpanic_unwind-f1f2102409186354.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libminiz_oxide-1e8b6b56a999f838.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libadler-d0e93eb4e14f1d19.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libobject-1d7e39d75d082b43.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libaddr2line-ade42e945045b261.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libgimli-1a65064fccf4ebc1.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libstd_detect-4d699c310fdfe72d.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/librustc_demangle-1cafa68a696ec800.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libhashbrown-e9f1c8c4dab2f046.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/librustc_std_workspace_alloc-ecc1a743be25c7f7.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libunwind-e074031c4b66b6b6.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libcfg_if-9aa6ed9f1d3bfd53.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/liblibc-7862bf96c2250ca0.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/liballoc-f02ce0dc7895b5fd.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/librustc_std_workspace_core-3af9c60917570521.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libcore-ca16fc7bb3645684.rlib" "-Wl,--end-group" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libcompiler_builtins-d8e1a5b7299604cc.rlib" "-Wl,-Bdynamic" "-lgcc_s" "-lutil" "-lrt" "-lpthread" "-lm" "-ldl" "-lc" "-Wl,--eh-frame-hdr" "-Wl,-znoexecstack" "-L" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib" "-o" "linking_failure" "-Wl,--gc-sections" "-pie" "-Wl,-zrelro" "-Wl,-znow" "-nodefaultlibs"
= note: /usr/bin/ld: linking_failure.linking_failure.7rcbfp3g-cgu.3.rcgu.o: in function `linking_failure::main':
linking_failure.7rcbfp3g-cgu.3:(.text._ZN15linking_failure4main17h52b6e3052e444479E+0x3): undefined reference to `doesnt_exist_thiwthwfyl'
clang: error: linker command failed with exit code 1 (use -v to see invocation)
= help: some `extern` functions couldn't be found; you may need to install or specify the path to some dependencies
= note: use the -L flag to specify the library lookup path
= note: use the cargo:rustc-link-search directive to specify the library lookup path with Cargo (see https://doc.rust-lang.org/cargo/reference/build-scripts.html#rustc-link-search)
error: aborting due to previous error
```
Fix ICE when `main` is declared in an `extern` block
Changes in #84401 to implement `imported_main` changed how the crate entry point is found, and a declared `main` in an `extern` block was detected erroneously. This was causing the ICE described in #86110.
This PR adds a check for this case and emits an error instead. Previously a `main` declaration in an `extern` block was not detected as an entry point at all, so emitting an error shouldn't break anything that worked previously. In 1.52.1 stable this is demonstrated, with a `` `main` function not found`` error.
Fixes#86110
Remove unused dependencies from compiler crates
Various compiler crates have dependencies that they don't appear to use. I used some scripting to detect such dependencies, filtered them based on some manual review, and removed those that do indeed appear to be entirely unused.
Test cross-crate usage of `feature(const_trait_impl)`
This PR does two things:
- Fixes metadata not encoded properly for functions in const trait impls.
- Adds tests for using const trait impls cross-crate with the feature gate on the user crate either enabled or disabled.
AFAIK, this means we can now constify some trait impls in the standard library 🎉
See #67792 for the tracking issue, cc `@oli-obk`
Check node kind to avoid ICE in `check_expr_return()`
This PR fixes#86721. The ICE described there is apparently due to a misunderstanding:
e98897e5dc/compiler/rustc_typeck/src/check/expr.rs (L684-L685)
Intuitively, one would think that calling `expect_item()` after `get_parent_item()` should succeed, but as it turns out, `get_parent_item()` can also return foreign, trait, and impl items as well as crates, whereas `expect_item()` specifically expects a `Node::Item`. I have therefore added an extra check to prevent this ICE.
There are several cases where names of types and functions in the debug info are either ambiguous, or not helpful, such as including ambiguous placeholders (e.g., `{{impl}}`, `{{closure}}` or `dyn _'`) or dropping qualifications (e.g., for dynamic types).
Instead, each debug symbol name should be unique and useful:
* Include disambiguators for anonymous `DefPathDataName` (closures and generators), and unify their formatting when used as a path-qualifier vs item being qualified.
* Qualify the principal trait for dynamic types.
* If there is no principal trait for a dynamic type, emit all other traits instead.
* Respect the `qualified` argument when emitting ref and pointer types.
* For implementations, emit the disambiguator.
* Print const generics when emitting generic parameters or arguments.
Additionally, when targeting MSVC, its debugger treats many command arguments as C++ expressions, even when the argument is defined to be a symbol name. As such names in the debug info need to be more C++-like to be parsed correctly:
* Avoid characters with special meaning (`#`, `[`, `"`, `+`).
* Never start a name with `<` or `{` as this is treated as an operator.
* `>>` is always treated as a right-shift, even when parsing generic arguments (so add a space to avoid this).
* Emit function declarations using C/C++ style syntax (e.g., leading return type).
* Emit arrays as a synthetic `array$<type, size>` type.
* Include a `$` in all synthetic types as this is a legal character for C++, but not Rust (thus we avoid collisions with user types).
This PR adds ability for the target specifications to specify frame
pointer emission type that's not just “always” or “whatever cg decides”.
In particular there's a new mode that allows omission of the frame
pointer for leaf functions (those that don't call any other functions).
We then set this new mode for Aarch64-based Apple targets.
Fixes#86196
Introduce -Zprofile-closures to evaluate the impact of 2229
This creates a CSV with name "closure_profile_XXXXX.csv", where the
variable part is the process id of the compiler.
To profile a cargo project you can run one of the following depending on
if you're compiling a library or a binary:
```
cargo +nightly rustc --lib -- -Zprofile-closures
cargo +nightly rustc --bin {binary_name} -- -Zprofile-closures
```
r? `@nikomatsakis`
Only include lint in future_incompatible lint group if not an edition lint
A follow up to #86330 - this only includes lints annotated with `FutureIncompatibleInfo` in the `future_incompatibile` lint group if the future compatibility is not tied to an edition.
We probably want to rename `FutureIncompatibleInfo` to something else since this type is now used to indicate future breakages of all kinds (even those that happen in editions). I'd prefer to do that in a separate PR though.
r? `@nikomatsakis`
Change vtable memory representation to use tcx allocated allocations.
This fixes https://github.com/rust-lang/rust/issues/86324. However i suspect there's more to change before it can land.
r? `@bjorn3`
cc `@rust-lang/miri`
One key observation while going over the closure size profile of rustc
was that we are disjointly capturing one or more fields starting at an
immutable reference.
Disjoint capture over immutable reference doesn't add too much value
because the fields can either be borrowed immutably or copied.
One possible edge case of the optimization is when a fields of a struct
have a longer lifetime than the structure, therefore we can't completely
get rid of all the accesses on top of sharef refs, only the rightmost
one. Here is a possible example:
```rust
struct MyStruct<'a> {
a: &'static A,
b: B,
c: C<'a>,
}
fn foo<'a, 'b>(m: &'a MyStruct<'b>) -> impl FnMut() + 'static {
let c = || drop(&*m.a.field_of_a);
// Here we really do want to capture `*m.a` because that outlives `'static`
// If we capture `m`, then the closure no longer outlives `'static'
// it is constrained to `'a`
}
```
Don't make `rustc_insignificant_dtor` feature gate
This isn't a feature gate, it's an attribute that is feature gated behind the `rustc_attrs` attribute. Closes#85680.
Fix garbled suggestion for missing lifetime specifier
This PR fixes#86667. The suggestion code currently checks whether there is a generic parameter that is not a synthetic `impl Trait` parameter and, if so, suggests to insert a new lifetime `'a` before that generic parameter. However, it does not make sense to insert `'a` in front of an elided lifetime parameter, since these are synthetic as well, which leads to the garbled suggestion in #86667.
Turn non_fmt_panic into a future_incompatible edition lint.
This turns the `non_fmt_panic` lint into a future_incompatible edition lint, so it becomes part of the `rust_2021_compatibility` group. See https://github.com/rust-lang/rust/issues/85894.
This lint produces both warnings about semantical changes (e.g. `panic!("{{")`) and things that will become hard errors (e.g. `panic!("{")`). So I added a `explain_reason: false` that supresses the default "this will become a hard error" or "the semantics will change" message, and instead added a note depending on the situation. (cc `@rylev)`
r? `@nikomatsakis`
Fix `future_prelude_collision` false positive
Fixes#86633
The lint for checking if method resolution of methods named `try_into` will fail in 2021 edition previously would fire on all inherent methods, however for inherent methods that consume `self`, this takes priority over `TryInto::try_into` due to being inherent, while trait method and methods that take `&self` or `&mut self` don't take priority, and thus aren't affected by this false positive.
This fix is rather simple: simply checking if the inherent method doesn't auto-deref or auto-ref (and thus takes `self`) and if so, prevents the lint from firing.
This prevents mistakes where the feature is in the list of incomplete
features but not actually a feature by making the incompleteness a part
of the declaration.
This creates a CSV with name "closure_profile_XXXXX.csv", where the
variable part is the process id of the compiler.
To profile a cargo project you can run one of the following depending on
if you're compiling a library or a binary:
```
cargo +stage1 rustc --lib -- -Zprofile-closures
cargo +stage1 rustc --bin -- -Zprofile-closures
```
Fix type checking of return expressions outside of function bodies
This pull request fixes#86188. The problem is that the current code for type-checking `return` expressions stops if the `return` occurs outside of a function body, while the correct behavior is to continue type-checking the return value expression (otherwise an ICE happens later on because variables declared in the return value expression don't have a type).
Also, I have noticed that it is sometimes not obvious why a `return` is outside of a function body; for instance, in the example from #86188 (which currently causes an ICE):
```rust
fn main() {
[(); return || {
let tx;
}]
}
```
I have changed the error message to also explain why the `return` is considered outside of the function body:
```
error[E0572]: return statement outside of function body
--> ice0.rs:2:10
|
1 | / fn main() {
2 | | [(); return || {
| |__________^
3 | || let tx;
4 | || }]
| ||_____^ the return is part of this body...
5 | | }
| |_- ...not the enclosing function body
```
Reserve prefixed identifiers and literals (RFC 3101)
This PR denies any identifiers immediately followed by one of three tokens `"`, `'` or `#`, which is stricter than the requirements of RFC 3101 but may be necessary according to the discussion at [Zulip].
[Zulip]: https://rust-lang.zulipchat.com/#narrow/stream/268952-edition-2021/topic/reserved.20prefixes/near/238470099
The tracking issue #84599 says we'll add a feature gate named `reserved_prefixes`, but I don't think I can do this because it is impossible for the lexer to know whether a feature is enabled or not. I guess determining the behavior by the edition information should be enough.
Fixes#84599
2229: Capture box completely in move closures
Even if the content from box is used in a sharef-ref context,
we capture the box entirerly.
This is motivated by:
1) We only capture data that is on the stack.
2) Capturing data from within the box might end up moving more data than
the user anticipated.
Closes https://github.com/rust-lang/project-rfc-2229/issues/50
r? `@nikomatsakis`
