This makes packages use lapack and blas, which can wrap different
BLAS/LAPACK implementations.
treewide: cleanup from blas/lapack changes
A few issues in the original treewide:
- can’t assume blas64 is a bool
- unused commented code
The v7 series is very different.
This commit introduces the 3 packages: fahclient, fahcontrol and
fahviewer. It also rebuilds the NixOS module to map better with the new
client.
Previously, we would asssert that the lockfiles are consistent during the
unpackPhase, but if the pkg has a patch for the lockfile itself then we must
wait until the patchPhase is complete to check.
This also removes an implicity dependency on the src attribute coming from
`fetchzip` / `fetchFromGitHub`, which happens to name the source directory
"source". Now we glob for it, so different fetchers will work consistently.
Changes the default fetcher in the Rust Platform to be the newer
`fetchCargoTarball`, and changes every application using the current default to
instead opt out.
This commit does not change any hashes or cause any rebuilds. Once integrated,
we will start deleting the opt-outs and recomputing hashes.
See #79975 for details.
In normal use of ROOT the PYTHONPATH is intended to be set when user
sources the thisroot.{,s}sh. We do that in the setupHook. This covers
the case when thisroot.sh was not sourced.
I haven't been doing any maintenance for a long time now and not only
do I get notified, it also creates a fake impression that all these
packages had at least one maintainer when in practice they had none.
There ver very many conflicts, basically all due to
name -> pname+version. Fortunately, almost everything was auto-resolved
by kdiff3, and for now I just fixed up a couple evaluation problems,
as verified by the tarball job. There might be some fallback to these
conflicts, but I believe it should be minimal.
Hydra nixpkgs: ?compare=1538299
A recent upgrade of cargo-vendor changed its output slightly, which
broke all cargoSha256 hashes in nixpkgs.
See https://github.com/NixOS/nixpkgs/issues/60668 for more information.
Since then, a few hashes have been fixed in master by hand, but there
were a lot still to do, so I did all of the ones left over with some
scripts I wrote.
The one hash I wasn’t able to update was habitat's, because it’s
currently broken and the build doesn’t get far enough to produce a
hash anyway.
Drop `python.majorVersion`. For Python language version, use `python.pythonVersion`.
For implementation version, use `python.sourceVersion`.
Some expressions were broken. Those that were identified were fixed.
fixup major
* simgrid: 3.19.1 -> 3.20
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/simgrid/versions.
These checks were done:
- built on NixOS
- /nix/store/cvyi6hvgc9rvgrnp7c028xrlzbl7jzb9-simgrid-3.20/bin/smpicc passed the binary check.
- /nix/store/cvyi6hvgc9rvgrnp7c028xrlzbl7jzb9-simgrid-3.20/bin/smpicxx passed the binary check.
- /nix/store/cvyi6hvgc9rvgrnp7c028xrlzbl7jzb9-simgrid-3.20/bin/smpirun passed the binary check.
- Warning: no invocation of /nix/store/cvyi6hvgc9rvgrnp7c028xrlzbl7jzb9-simgrid-3.20/bin/tesh had a zero exit code or showed the expected version
- /nix/store/cvyi6hvgc9rvgrnp7c028xrlzbl7jzb9-simgrid-3.20/bin/simgrid-colorizer passed the binary check.
- Warning: no invocation of /nix/store/cvyi6hvgc9rvgrnp7c028xrlzbl7jzb9-simgrid-3.20/bin/simgrid_update_xml had a zero exit code or showed the expected version
- /nix/store/cvyi6hvgc9rvgrnp7c028xrlzbl7jzb9-simgrid-3.20/bin/simgrid_convert_TI_traces passed the binary check.
- Warning: no invocation of /nix/store/cvyi6hvgc9rvgrnp7c028xrlzbl7jzb9-simgrid-3.20/bin/smpimain had a zero exit code or showed the expected version
- /nix/store/cvyi6hvgc9rvgrnp7c028xrlzbl7jzb9-simgrid-3.20/bin/graphicator passed the binary check.
- 6 of 9 passed binary check by having a zero exit code.
- 4 of 9 passed binary check by having the new version present in output.
- found 3.20 with grep in /nix/store/cvyi6hvgc9rvgrnp7c028xrlzbl7jzb9-simgrid-3.20
- directory tree listing: https://gist.github.com/edefc2f1a2e81412484edc2e45986e03
- du listing: https://gist.github.com/a44f7d57537e93152a8e6c569f8ed1ae
* simgrid: 3.19.1 -> 3.20 + add darwin
- Fix dependencies to enable build on darwin
- Add ctest flag to enable parallel testing
* Use simpler parallel testing logic
because it is already done in nixpkgs/pkgs/stdenv/generic/setup.sh
Lots of packages are missing versions in their name. This adds them
where appropriate. These were found with this command:
$ nix-env -qa -f. | grep -v '\-[0-9A-Za-z.-_+]*$' | grep -v '^hook$'
See issue #41007.
The package breaks currently breaks with the following message:
```
fixed-output derivation produced path '/nix/store/5dh1mdj027ad8sprk12fqa5h5bpdxs5n-sasview' with sha256 hash '12k1w4yq1mzjxcp2cqb562c7cbwzhi54rsbmgi0fax0i1660q167' instead of the expected hash '05la54wwzzlkhmj8vkr0bvzagyib6z6mgwqbddzjs5y1wd48vpcx'
```
To fix the build the following changes were applied:
* Switched to latest master for now as the older releases have a broken
`py.test` configuration and altering hashes.
* Added `checkPhase` which invokes `py.test` directly and drops
duplicated files from `dist/tmpbuild`.
* Rebased the patches `pyparsing-fix.patch` and `local_config.patch` for
the latest master revision.
Additionally refer to the discussion in #40381 for further reference.
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/cytoscape/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/87clhargb10b1aps6nq86k0xz6yqyydz-cytoscape-3.6.1/bin/cytoscape -h’ got 0 exit code
- ran ‘/nix/store/87clhargb10b1aps6nq86k0xz6yqyydz-cytoscape-3.6.1/bin/cytoscape --help’ got 0 exit code
- found 3.6.1 with grep in /nix/store/87clhargb10b1aps6nq86k0xz6yqyydz-cytoscape-3.6.1
- directory tree listing: https://gist.github.com/8bad808238fc034c5394a80d8a5c1554
Sasview is a data fitting and analysis package for small angle
scattering data. More information can be found at
https://www.sasview.org.
There is some unfortunate cruft to this commit. SasView uses the
xhtml2pdf python package, which has a specific version of html5lib as
a dependency. This module manually loads that version into sasview.
I haven't made xhtml2pdf available as its own package due to these
circumstances.
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/genreflex -h` got 0 exit code
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/genreflex --help` got 0 exit code
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/pq2 -h` got 0 exit code
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/rootn.exe -h` got 0 exit code
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/rootn.exe --help` got 0 exit code
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/rootn.exe -h` and found version 6.12.06
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/rootn.exe --help` and found version 6.12.06
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/xpdtest -h` got 0 exit code
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/xpdtest --help` got 0 exit code
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/root.exe -h` got 0 exit code
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/root.exe --help` got 0 exit code
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/root.exe -h` and found version 6.12.06
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/root.exe --help` and found version 6.12.06
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/root-config --help` got 0 exit code
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/root-config --version` and found version 6.12.06
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/prepareHistFactory -h` got 0 exit code
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/prepareHistFactory --help` got 0 exit code
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/prepareHistFactory help` got 0 exit code
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/prepareHistFactory -V` and found version 6.12.06
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/prepareHistFactory -v` and found version 6.12.06
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/prepareHistFactory --version` and found version 6.12.06
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/prepareHistFactory version` and found version 6.12.06
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/prepareHistFactory -h` and found version 6.12.06
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/prepareHistFactory --help` and found version 6.12.06
- ran `/nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06/bin/prepareHistFactory help` and found version 6.12.06
- found 6.12.06 with grep in /nix/store/4gcl610xv4sj6vzwnksm825qp29f8ibx-root-6.12.06
cc "@veprbl"
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/z17wdp6l55y3b18875c9zj2pw1lywrqd-tulip-5.1.0/bin/tulip-config -h` got 0 exit code
- ran `/nix/store/z17wdp6l55y3b18875c9zj2pw1lywrqd-tulip-5.1.0/bin/tulip-config --help` got 0 exit code
- ran `/nix/store/z17wdp6l55y3b18875c9zj2pw1lywrqd-tulip-5.1.0/bin/tulip-config help` got 0 exit code
- ran `/nix/store/z17wdp6l55y3b18875c9zj2pw1lywrqd-tulip-5.1.0/bin/tulip-config --version` and found version 5.1.0
- found 5.1.0 with grep in /nix/store/z17wdp6l55y3b18875c9zj2pw1lywrqd-tulip-5.1.0
cc ""
* pkgs: refactor needless quoting of homepage meta attribute
A lot of packages are needlessly quoting the homepage meta attribute
(about 1400, 22%), this commit refactors all of those instances.
* pkgs: Fixing some links that were wrongfully unquoted in the previous
commit
* Fixed some instances
This also fixes breakage on darwin due to LLVM4.0 migration.
I had to enable opengl because otherwise macOS build is broken.
See root commit 23f8871c7 ('Do not include OpenGL directly but use our
TGLIncludes for that purpose.')
I've enabled xml because TUnfold depends on it.
Looks like the latest version no longer requires the patch, and the patch instead resulted in
/etc files being installed to `$out/$out/etc` instead of `$out/etc`
