Kevin
6d9af8304c
Add USBPHYC clock configuration for H7RS series
2024-09-22 00:23:07 +02:00
Kevin
2f60d78ea3
Add OTG_HS support for STM32H7R/S
2024-09-22 00:23:07 +02:00
Reed
3328c5d656
Correctly gate time feature of embassy-embedded-hal in embassy-stm32
2024-09-21 12:31:38 +12:00
Gerhard de Clercq
5ea934d4ba
embassy_stm32/eth: support compliance testing
...
This change adds the possibility to perform compliance testing with
STM32 systems by directly exposing SMI when needed. Users can
then use this to configure PHY registers for test modes.
2024-09-20 09:57:31 +02:00
Dario Nieuwenhuis
ae8caf3f55
Merge pull request #3314 from elagil/add_iso_endpoint_support
...
Add ISO endpoint support
2024-09-16 19:51:52 +00:00
Dario Nieuwenhuis
c739091085
Update stm32-metapac.
2024-09-11 01:19:46 +02:00
Romain Goyet
d69f68b8c0
stm32: Use a GLOBAL interrupt for lptim
2024-09-11 01:18:52 +02:00
Romain Goyet
69208daf6d
stm32: Fixing stupid typo (thanks @dirbaio)
2024-09-11 01:18:52 +02:00
Romain Goyet
ac319970b8
stm32: Work around LPTIM4
2024-09-11 01:18:52 +02:00
Romain Goyet
652133bce4
stm32: Support LPTIM v1 and v2
2024-09-11 01:18:52 +02:00
Romain Goyet
37130f45e4
stm32: Use the updated LPTIM pac
2024-09-11 01:18:52 +02:00
Romain Goyet
b449e04a88
stm32: Temporary fix around incomplete stm32-metapac
2024-09-11 01:18:52 +02:00
Romain Goyet
3b8859653e
stm32: Clean up the lptim driver
2024-09-11 01:18:52 +02:00
Romain Goyet
a1c9a2e8bd
First working draft of a lptim driver
...
This driver is able to PWM a pin
2024-09-11 01:18:52 +02:00
Dario Nieuwenhuis
1ea29f1d2e
Merge pull request #3169 from Adancurusul/g4_dev
...
Add adc oversampling and adc differential for g4
2024-09-10 23:07:11 +00:00
Dario Nieuwenhuis
fac71e594e
Merge pull request #3271 from sjoerdsimons/ucpd-sop-filters
...
[UCPD] Add support for non-SOP packets
2024-09-10 23:03:58 +00:00
Dario Nieuwenhuis
609b1b0355
Merge pull request #3286 from trnila/stm32_usart_break
...
stm32/usart: sending break character
2024-09-10 21:33:27 +00:00
Dario Nieuwenhuis
1058afd5fd
Merge pull request #3303 from maximevince/stm32f2-flash-support-blocking
...
stm32: add f2 flash support (blocking)
2024-09-10 21:30:54 +00:00
Dario Nieuwenhuis
d5e77f69c1
Merge pull request #3319 from badrbouslikhin/buffered-uart-rx-fix
...
fix(stm32): fix dma and idle line detection in ringbuffereduartrx
2024-09-10 21:30:22 +00:00
elagil
e698fbe598
fix: pull-down clock/data lines for receive
2024-09-10 21:38:05 +02:00
Badr Bouslikhin
0e477a4df5
fix(stm32): enable dma half transfer interrupt for buffereduart
2024-09-06 18:55:33 +02:00
Badr Bouslikhin
ee25f14b20
fix(stm32): reorder dma and idle futures
2024-09-06 18:55:33 +02:00
elagil
ccf68d7391
feat(usb): add support for ISO endpoints
2024-09-05 21:29:04 +02:00
Maxime Vincent
82f274ea09
stm32: add f2 flash support (blocking)
2024-09-02 12:25:42 +02:00
Daniel Trnka
22f4459ae2
stm32/usart: sending break character in buffered usart
2024-08-28 21:55:08 +02:00
Scott Mabin
f0a8607051
Add block-device-driver impl for use with embedded-fatfs ( #2607 )
2024-08-26 20:45:57 +02:00
Daniel Trnka
bea1f34440
stm32/usart: sending break character
2024-08-25 21:49:43 +02:00
Ulf Lilleengen
1ff1f00d5a
Merge pull request #3282 from elagil/add_sai_is_muted
...
feat: add function to check if SAI is muted
2024-08-25 13:59:27 +00:00
Ulf Lilleengen
1cfd5370ac
Merge pull request #3281 from elagil/ulpi_add_fs_support
...
feat: Add support for a full-speed ULPI mode
2024-08-25 06:05:41 +00:00
Emil Fresk
41e162541a
stm32: Fix log storm when no CAN is connected
...
Running the bxcan driver without having it connected
to a CAN bus causes the `info` logs to bombard.
This removes the logging statements as they looked
like remnants from the development of the driver.
2024-08-25 07:14:19 +02:00
elagil
557cff7085
feat: Add support for a full-speed ULPI mode
2024-08-24 20:23:10 +02:00
elagil
87e97fb69d
feat: add function to check if SAI is muted
2024-08-24 20:16:00 +02:00
Dario Nieuwenhuis
1c466b81e6
Merge pull request #3233 from nautd/uart_half_duplex_fix
...
Convert uart half_duplex to use user configurable IO
2024-08-19 20:20:20 +00:00
Karun
bbc06035c1
make half duplex fn private
2024-08-19 12:15:39 -04:00
Karun
fcf9b3239e
remove duplication
2024-08-19 11:27:18 -04:00
Sjoerd Simons
1b0661ebb1
[UCPD] Add support for non-SOP packets
...
Allow capturing (and distinguishing) non-SOP packets as well. The
default configuration will just configure SOP packets. For ease of use
the default receive function signature is unchanged as for PD sinks
(which is likely the common usage) just SOP is enough so no need to
differentiate.
2024-08-18 21:19:16 +02:00
Dario Nieuwenhuis
8884766450
stm32: update metapac
2024-08-17 21:57:40 +02:00
Alexandros Liarokapis
2b7e76efe9
Fix dma nvic issues on dual core lines
...
This commit addresses #3256 by disabling dma NVIC interrupt enablement at startup.
Instead, per-channel NVIC interrupt enablement is now done with the rest of the dma channel configuration.
This ensures that each core will only handle the interrupts of the DMA channels that it uses.
2024-08-17 16:54:41 +03:00
Dario Nieuwenhuis
55c01818cf
Merge pull request #3213 from embedded-rust-iml/stm32l4-low-power
...
Implement low-power feature for STM32L4 MCUs
2024-08-13 16:43:23 +00:00
Karun
446169b2c1
Add gpio version dependency
...
Add configurable output type for half-duplex
2024-08-06 11:52:16 -04:00
Karun
a725892720
Convert uart half_duplex to use open-drain pull-up
2024-08-05 15:37:03 -04:00
Dion Dokter
ab4d378dda
Merge branch 'master' into stm-dualcore
2024-08-05 11:21:21 +02:00
Dion Dokter
2a7fe16ceb
Improve shared data placement, require less atomic support and use unsafecell for the clocks
2024-08-05 11:18:16 +02:00
Ulf Lilleengen
37d7b0cd06
prepare release embassy-executor
2024-08-05 08:56:29 +02:00
Ulf Lilleengen
44282b18fa
Prepare embassy-time release
2024-08-05 08:56:29 +02:00
Ulf Lilleengen
fb0ab1e42a
Prepare release of embassy-hal-internal
2024-08-05 08:56:29 +02:00
Ulf Lilleengen
5767c003cc
Prepare release of embassy-embedded-hal 0.2.0
2024-08-05 08:56:29 +02:00
Ulf Lilleengen
91f135e25b
Merge pull request #3161 from diondokter/hsem
...
Add function to get the active HSEM interrupt
2024-07-31 14:34:11 +00:00
Samuel Tardieu
8680c86894
embassy-stm32: wait for BSY flag to clear before flashing
...
While not waiting for the BSY flag to clear works on STM32F103C8T6, it
does not on APM32F103C8T6. Only one half-word gets written while the
other one gets lost.
2024-07-27 15:07:04 +02:00
Tobias Naumann
60aa9c15a8
Implement low-power feature for stm32l4 MCUs
2024-07-26 14:25:10 +02:00
