nordic-dev.net/embassy
2
0
Fork 0
mirror of https://github.com/embassy-rs/embassy.git synced 2024-11-22 14:53:03 +00:00
Code Issues Packages Projects Releases Wiki Activity
7,647 Commits 81 Branches 67 Tags 25 MiB
65c085ce91
Commit Graph

106 Commits

Author SHA1 Message Date
Dario Nieuwenhuis
4079a8acf8 stm32/adc: update g4 for new pac. 2024-04-14 22:06:41 +02:00
Andres Vahter
fd901fc7e0 stm32: update adc examples 2024-04-10 10:57:52 +03:00
Corey Schuhen
2217b80278 CAN: Unify API's between BXCAN and FDCAN. Use Envelope for all read methods instead of a tuple sometimes. 2024-03-28 09:32:13 +10:00
Adam Greig
7cf6490fba
usb: remove device_descriptor buffer, store bytes in UsbDevice.inner instead 2024-03-23 00:35:15 +00:00
Timo Kröger
7b80de5e3d [UCPD] Enable dead-battery support in example 2024-03-14 22:14:20 +01:00
Timo Kröger
e95e95ac7a [UCPD] Take interrupt in constructor and enable it 2024-03-14 21:55:05 +01:00
Timo Kröger
89504f5162 [UCPD] Split into CC and PD phy 
PD3.0 spec requires concurrent control of CC resistors for collision avoidance.
Needed to introduce some "ref counting" (its just a bool) for drop code.
 2024-03-12 08:14:42 +01:00
Timo Kröger
b7972048a1 [UCPD] Improve example and defmt Format for enums 2024-03-12 08:14:42 +01:00
Timo Kröger
5e271ff31b [UCPD] Combine RX and TX 
`select(rx.receive(), tx.transmit()` had subtle interrupt enable race conditions.
Combine receiver and transmitter into one new `PdPhy` struct to disallow the
problematic pattern.
Scanning through the USB PD 2.0 specification there is no need to have RX and TX
running concurrently (after all the USB PD communication is half-duplex).
 2024-03-12 08:14:42 +01:00
Timo Kröger
4d0e383816 [UCPD] Prepare for PD communication implementation 2024-03-12 08:14:42 +01:00
Timo Kröger
a3b1222617 [UCPD] Improve Type-C CC handling 
* Improved interrupt handling: Clear flags in ISR, check state change in future
* Disable pull-up/pull-down resistors and voltage monitor on drop
* nightly rustfmt
 2024-03-12 08:14:42 +01:00
Timo Kröger
d99fcfd0c2 [UCPD] Configuration Channel (CC) handling 2024-03-12 08:14:42 +01:00
Dario Nieuwenhuis
b4567bb8c5 stm32/rcc: g4: consistent PllSource, add pll pqr limits, simplify a bit. 2024-03-04 00:04:06 +01:00
Dario Nieuwenhuis
3fe907b54d
Merge pull request #2646 from cschuhen/feature/wake_tx_on_buffered_push 
Give CAN a kick when writing into TX buffer via sender.
 2024-03-01 23:15:42 +00:00
Corey Schuhen
df8f508ffa Writing to TX buffer also needs to fire an interrupt to kick off transmission if it is idle. 
Formatting
 2024-03-02 09:09:27 +10:00
Dario Nieuwenhuis
95234cddba stm32: autogenerate mux config for all chips. 2024-03-01 23:54:37 +01:00
Haobo Gu
a0afd378f4 update usbd-hid to latest 
Signed-off-by: Haobo Gu <haobogu@outlook.com>
 2024-02-26 17:28:29 +08:00
Dario Nieuwenhuis
72c6f9a101 stm32/adc: reexport enums from PAC to avoid boilerplate hell. 2024-02-26 03:02:58 +01:00
Corey Schuhen
1327a644b6 FDCAN: Don't require internal module for public API. 2024-02-25 10:14:12 +10:00
Corey Schuhen
3f93105e9f Add dep for static_cell to example. 2024-02-19 08:33:19 +10:00
Corey Schuhen
eafa90cd07 Remove the OperatingMode typestates 
Instead have two explcit types(without the mode generic arg)types:
- One for config
- One for all operating modes
 2024-02-18 13:09:37 +10:00
Corey Schuhen
5ad291b708 Add a buffered mode. 2024-02-17 18:26:57 +10:00
Corey Schuhen
70b3c4374d Port FDCAN HAL to use PAC directly instead of fdcan crate. 
- Provide separate FDCAN capable and Classic CAN API's
- Don't use fdcan crate dep anymore
- Provide embedded-can traits.
 2024-02-17 18:25:58 +10:00
Barnaby Walters
6d7458dac7 Refinements 
* Implemented boost mode dance (RM0440 p234-245, 6.5.1)
* Enabled boost mode in usb_serial example, tested on hardware
* Removed hard requirement of a valid 48MHz source (HSI48 is checked if
  requested, PLL passed through as-is and assumed to be valid)
* Used calc_pclk to calculate APB frequencies
* Refactored 48MHz configuration code to remove unnecessary let and block
* Renamed ahb_freq to hclk for clarity and consistency
 2024-02-17 00:30:16 +01:00
Barnaby Walters
ae74833999 Removed redundant HSI48 configuration 2024-02-16 20:32:35 +01:00
Barnaby Walters
5b7eff6541 [embassy-stm32]: started stm32g4 RCC refactor 
* Copied API from f.rs where applicable
* HSE and HSI independantly configurable
* Boost mode set by user rather
* Added HSE, pll1_q and pll1_p frequencies to set_clocks call
* Stubbed max module based on f.rs, needs cleanup
 2024-02-15 23:56:26 +01:00
Corey Schuhen
1698f4dbc3 Add FDCAN examples for STM32G4, STM32H5 and STM32H7 
Fix examples

Fix examples

Fix examples.
 2024-01-31 05:40:05 +10:00
Tomasz bla Fortuna
a91a7a8557 Add FDCAN dependency in correct flavor based on selected chip. 
Author: Torin Cooper-Bennun <tcbennun@maxiluxsystems.com>

Change from review.
 2024-01-31 05:40:05 +10:00
Dario Nieuwenhuis
3387ee7238 stm32/gpio: remove generics. 2024-01-22 21:31:06 +01:00
Dario Nieuwenhuis
22197320ff bump embassy-time 0.3, embassy-executor 0.5, embassy-net 0.4. 2024-01-11 23:01:24 +01:00
Dario Nieuwenhuis
495b8b739a Change GPIO inherent methods back to &self. 
With the embedded-hal rc3 update I changed them to require `&mut self`, but
in retrospect I think `&self` is better, for extra flexibility.

This PR reverts the changes from the rc3 update to inherent methods.
 2024-01-10 00:00:10 +01:00
Dario Nieuwenhuis
8b36a32ed5 ci: use beta, add secondary nightly ci. 2023-12-21 15:03:57 +01:00
Dario Nieuwenhuis
d81395fab3 Update embedded-hal to 1.0.0-rc.3 2023-12-14 16:19:32 +01:00
Jesse Braham
925f5cbc26 Update all references to embasy-executor to the latest version 2023-12-06 12:05:47 +01:00
Scott Mabin
334900752a update release version in examples and other crates 2023-12-04 13:15:10 +00:00
Dario Nieuwenhuis
c6989dfbca Remove nightly and unstable-traits features in preparation for 1.75. 2023-11-29 17:26:33 +01:00
Dario Nieuwenhuis
1f9b649f80 executor: release v0.3.3 2023-11-15 18:44:01 +01:00
Dario Nieuwenhuis
4fe344ebc0 stm32/rcc: consistent casing and naming for PLL enums. 2023-11-13 00:52:01 +01:00
Dario Nieuwenhuis
4647df14b1 Update heapless to v0.8, embedded-nal-async to v0.7 2023-11-10 16:43:53 +01:00
Dario Nieuwenhuis
0b015bd727 usb: remove msos-descriptor feature. 2023-11-08 23:21:52 +01:00
Dario Nieuwenhuis
0272deb158 stm32/rcc: add shared code for hsi48 with crs support. 2023-11-05 23:52:54 +01:00
Dario Nieuwenhuis
dd6a29adb2 Release embassy-executor v0.3.1 2023-11-01 00:17:44 +01:00
Dániel Buga
d941882066 Prepare embassy-net 0.2.1 and embassy-sync 0.4.0 2023-10-31 09:33:27 +01:00
Dario Nieuwenhuis
412bcad2d1 stm32: rename HSI16 -> HSI 2023-10-22 22:39:55 +02:00
Dion Dokter
5b3f75dc72 Merge branch 'master' into center-align 2023-10-20 14:17:55 +02:00
Dario Nieuwenhuis
213b4c9dca time: add links key, release v0.1.5. 2023-10-16 20:11:35 +02:00
xoviat
4a156df7a1 stm32: expand rcc mux to g4 and h7 2023-10-14 23:33:57 -05:00
Adam Greig
0621e957a0
time: Update examples, tests, and other code to use new Timer::after_x convenience methods 2023-10-15 01:30:12 +01:00
Dániel Buga
02d2c06b23 Release embassy-time 0.1.4 2023-10-12 18:14:33 +02:00
Dario Nieuwenhuis
0cfa8d1bb5 stm32/rcc: use more PLL etc enums from PAC. 2023-10-11 00:12:33 +02:00