Fix `target_env` in `avr-unknown-gnu-atmega328`
The target name itself contains GNU, we should probably reflect that as `target_env = "gnu"` as well? Or from my reading of https://github.com/rust-lang/rust/pull/74941#issuecomment-712219034, perhaps not, but then that should probably be documented somewhere?
There's no listed target maintainer, but the target was introduced in https://github.com/rust-lang/rust/pull/74941, so I'll ping the author of that: `@dylanmckay`
Relatedly, I wonder _why_ the recommendation is to [create separate target triples for each AVR](https://github.com/Rahix/avr-hal/tree/main/avr-specs), when `-Ctarget-cpu=...` would suffice, perhaps you could also elaborate on that? Was it just because `-Ctarget-cpu=...` didn't exist back then? If so, now that it does, should we now change the target back to e.g. `avr-unknown-none-gnu`, and require the user to set `-Ctarget-cpu=...` instead?
Add x86_64-unknown-trusty as tier 3 target
This PR adds a third target for the Trusty platform, `x86_64-unknown-trusty`.
Please let me know if an MCP is required. https://github.com/rust-lang/compiler-team/issues/582 was made when adding the first two targets, I can make another one for the new target as well if needed.
# Target Tier Policy Acknowledgements
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
- Nicole LeGare (```@randomPoison)```
- Andrei Homescu (```@ahomescu)```
- Chris Wailes (chriswailes@google.com)
- As a fallback trusty-dev-team@google.com can be contacted
Note that this does not reflect the maintainers currently listed in [`trusty.md`](c52c23b6f4/src/doc/rustc/src/platform-support/trusty.md). #130452 is currently open to update the list of maintainers in the documentation.
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
The new target `x86_64-unknown-trusty` follows the existing naming convention for similar targets.
> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
👍
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
There are no known legal issues or license incompatibilities.
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
👍
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This PR only adds the target. `std` support is being worked on and will be added in a future PR.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
👍
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via ```@)``` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
👍
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
👍
> Tier 3 targets must be able to produce assembly using at least one of rustc's supported backends from any host target. (Having support in a fork of the backend is not sufficient, it must be upstream.)
👍
Fix `target_abi` in SOLID targets
The `armv7a-kmc-solid_asp3-eabi` and `armv7a-kmc-solid_asp3-eabihf` targets clearly have the ABI in their name, so it should also be exposed in Rust's `target_abi` cfg variable.
CC target maintainer `@kawadakk.`
Fix `target_vendor` for `aarch64-nintendo-switch-freestanding`
Previously set to `target_vendor = "unknown"`, but Nintendo is clearly the vendor of the Switch, and is also reflected in the target name itself.
CC target maintainers `@leo60228` and `@jam1garner`
The `armv7a-kmc-solid_asp3-eabi` and `armv7a-kmc-solid_asp3-eabihf`
targets clearly have the ABI in their name, so it should also be exposed
in Rust's `target_abi` cfg variable.
Apple: Do not specify an SDK version in `rlib` object files
This was added in https://github.com/rust-lang/rust/pull/114114, but is unnecessary, since it ends up being overwritten when linking anyhow, and it feels wrong to embed some arbitrary SDK version in here. The object files produced by LLVM also do not set this, and the tooling shows `n/a` when it's `0`, so it seems to genuinely be optional in object files.
I've also added a test for the different places the SDK version shows up, and documented a bit more in the code how SDK versions work.
See https://github.com/rust-lang/rust/issues/129432 for the bigger picture.
Tested with (excludes the same few targets as in https://github.com/rust-lang/rust/pull/130435):
```console
./x test tests/run-make/apple-sdk-version --target aarch64-apple-darwin,aarch64-apple-ios,aarch64-apple-ios-macabi,aarch64-apple-ios-sim,aarch64-apple-tvos,aarch64-apple-tvos-sim,aarch64-apple-visionos,aarch64-apple-visionos-sim,aarch64-apple-watchos,aarch64-apple-watchos-sim,arm64_32-apple-watchos,armv7k-apple-watchos,armv7s-apple-ios,x86_64-apple-darwin,x86_64-apple-ios,x86_64-apple-ios-macabi,x86_64-apple-tvos,x86_64-apple-watchos-sim,x86_64h-apple-darwin
IPHONEOS_DEPLOYMENT_TARGET=10.0 ./x test tests/run-make/apple-sdk-version --target=i386-apple-ios
```
CC `@BlackHoleFox,` you [originally commented on these values](https://github.com/rust-lang/rust/pull/114114#discussion_r1300599445).
`@rustbot` label O-apple
Move Apple linker args from `rustc_target` to `rustc_codegen_ssa`
They are dependent on the deployment target and SDK version, but having these in `rustc_target` makes it hard to introduce that dependency. Part of the work needed to do https://github.com/rust-lang/rust/issues/118204, see https://github.com/rust-lang/rust/pull/129342 for some discussion.
Tested using:
```console
./x test tests/run-make/apple-deployment-target --target="aarch64-apple-darwin,aarch64-apple-ios,aarch64-apple-ios-macabi,aarch64-apple-ios-sim,aarch64-apple-tvos,aarch64-apple-tvos-sim,aarch64-apple-visionos,aarch64-apple-visionos-sim,aarch64-apple-watchos,aarch64-apple-watchos-sim,arm64_32-apple-watchos,armv7k-apple-watchos,armv7s-apple-ios,x86_64-apple-darwin,x86_64-apple-ios,x86_64-apple-ios-macabi,x86_64-apple-tvos,x86_64-apple-watchos-sim,x86_64h-apple-darwin"
IPHONEOS_DEPLOYMENT_TARGET=10.0 ./x test tests/run-make/apple-deployment-target --target=i386-apple-ios
```
`arm64e-apple-darwin` and `arm64e-apple-ios` have not been tested, see https://github.com/rust-lang/rust/issues/130085, neither is `i686-apple-darwin`, since that requires using an x86_64 macbook, and I currently can't get mine to work, see https://github.com/rust-lang/rust/issues/130434.
CC `@petrochenkov`
Fixup Apple target's description strings
Noticed this inconsistency in how the Apple target's had their new descriptions written while looking at https://github.com/rust-lang/rust/pull/130614, and figured it was easy enough to fixup shortly. I think prefixing every OS with `Apple` is clearer, especially for less known ones like `visionOS` and `watchOS`; so that's what was done here along with making the architecture names more consistent and then some other small tweaks.
~~r? `@thomcc~~`
cc `@madsmtm`
The previous name is just an LLVMism, which conveys almost nothing about
what is actually meant by the function relative to the ABI.
In doing so, remove an already-addressed FIXME.
This is a follow-up to #123159, but applied to Armv8-R.
This required https://github.com/llvm/llvm-project/pull/88287 to work
properly. Now that this change exists in rustc's llvm, we can fix
Armv8-R's default fpu features. In Armv8-R's case, the default features
from LLVM for floating-point are sufficient, because there is no
integer-only variant of this architecture.
target: default to the medium code model on LoongArch targets
The Rust LoongArch targets have been using the default LLVM code model so far, which is "small" in LLVM-speak and "normal" in LoongArch-speak. As described in the "Code Model" section of LoongArch ELF psABI spec v20231219 [1], one can only make function calls as far as ±128MiB with the "normal" code model; this is insufficient for very large software containing Rust components that needs to be linked into the big text section, such as Chromium.
Because:
* we do not want to ask users to recompile std if they are to build such software,
* objects compiled with larger code models can be linked with those with smaller code models without problems, and
* the "medium" code model is comparable to the "small"/"normal" one performance-wise (same data access pattern; each function call becomes 2-insn long and indirect, but this may be relaxed back into the direct 1-insn form in a future LLVM version), but is able to perform function calls within ±128GiB,
it is better to just switch the targets to the "medium" code model, which is also "medium" in LLVM-speak.
Relands [2]: #120661
[1]: https://github.com/loongson/la-abi-specs/blob/v2.30/laelf.adoc#code-models
[2]: https://github.com/rust-lang/rust/issues/121289#issuecomment-2333687396
Simplify some nested `if` statements
Applies some but not all instances of `clippy::collapsible_if`. Some ended up looking worse afterwards, though, so I left those out. Also applies instances of `clippy::collapsible_else_if`
Review with whitespace disabled please.
Fix default/minimum deployment target for Aarch64 simulator targets
The minimum that `rustc` encoded did not match [the version in Clang](https://github.com/llvm/llvm-project/blob/llvmorg-18.1.8/llvm/lib/TargetParser/Triple.cpp#L1900-L1932), and that meant that that when linking, Clang ended up bumping the version. See https://github.com/rust-lang/rust/issues/129432 for more motivation behind this change.
Specifically, this PR sets the correct deployment target of the following targets:
- `aarch64-apple-ios-sim` from 10.0 to 14.0
- `aarch64-apple-tvos-sim` from 10.0 to 14.0
- `aarch64-apple-watchos-sim` from 5.0 to 7.0
- `aarch64-apple-ios-macabi` from 13.1 to 14.0
I have chosen not to document the `-sim` changes in the platform support docs, as it is fundamentally uninteresting; the normal targets (e.g. `aarch64-apple-ios`) still have the same deployment target, and that's what developers should actually target.
r? compiler
CC `@BlackHoleFox`
Pass deployment target when linking with CC on Apple targets
This PR effectively implements what's also being considered in the `cc` crate [here](https://github.com/rust-lang/cc-rs/issues/1030#issuecomment-2051020649), that is:
- When linking macOS targets with CC, pass the `-mmacosx-version-min=.` option to specify the desired deployment target. Also, no longer pass `-m32`/`-m64`, these are redundant since we already pass `-arch`.
- When linking with CC on iOS, tvOS, watchOS and visionOS, only pass `-target` (we assume for these targets that CC forwards to Clang).
This is required to get the linker to emit the correct `LC_BUILD_VERSION` of the final binary. See https://github.com/rust-lang/rust/issues/129432 for more motivation behind this change.
r? compiler
CC `@BlackHoleFox`
The Rust LoongArch targets have been using the default LLVM code model
so far, which is "small" in LLVM-speak and "normal" in LoongArch-speak.
As described in the "Code Model" section of LoongArch ELF psABI spec
v20231219 [1], one can only make function calls as far as ±128MiB with
the "normal" code model; this is insufficient for very large software
containing Rust components that needs to be linked into the big text
section, such as Chromium.
Because:
* we do not want to ask users to recompile std if they are to build
such software,
* objects compiled with larger code models can be linked with those
with smaller code models without problems, and
* the "medium" code model is comparable to the "small"/"normal" one
performance-wise (same data access pattern; each function call
becomes 2-insn long and indirect, but this may be relaxed back into
the direct 1-insn form in a future LLVM version), but is able to
perform function calls within ±128GiB,
it is better to just switch the targets to the "medium" code model,
which is also "medium" in LLVM-speak.
[1]: https://github.com/loongson/la-abi-specs/blob/v2.30/laelf.adoc#code-models
Co-authored-by: WANG Rui <wangrui@loongson.cn>
Add -Z small-data-threshold
This flag allows specifying the threshold size above which LLVM should not consider placing small objects in a `.sdata` or `.sbss` section.
Support is indicated in the target options via the
small-data-threshold-support target option, which can indicate either an
LLVM argument or an LLVM module flag. To avoid duplicate specifications
in a large number of targets, the default value for support is
DefaultForArch, which is translated to a concrete value according to the
target's architecture.
