Fix an intrinsic invocation on threaded wasm
This looks like it was forgotten to get updated in #74482 and wasm with
threads isn't built on CI so we didn't catch this by accident.
specialize io::copy to use copy_file_range, splice or sendfile
Fixes#74426.
Also covers #60689 but only as an optimization instead of an official API.
The specialization only covers std-owned structs so it should avoid the problems with #71091
Currently linux-only but it should be generalizable to other unix systems that have sendfile/sosplice and similar.
There is a bit of optimization potential around the syscall count. Right now it may end up doing more syscalls than the naive copy loop when doing short (<8KiB) copies between file descriptors.
The test case executes the following:
```
[pid 103776] statx(3, "", AT_STATX_SYNC_AS_STAT|AT_EMPTY_PATH, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0644, stx_size=17, ...}) = 0
[pid 103776] write(4, "wxyz", 4) = 4
[pid 103776] write(4, "iklmn", 5) = 5
[pid 103776] copy_file_range(3, NULL, 4, NULL, 5, 0) = 5
```
0-1 `stat` calls to identify the source file type. 0 if the type can be inferred from the struct from which the FD was extracted
𝖬 `write` to drain the `BufReader`/`BufWriter` wrappers. only happen when buffers are present. 𝖬 ≾ number of wrappers present. If there is a write buffer it may absorb the read buffer contents first so only result in a single write. Vectored writes would also be an option but that would require more invasive changes to `BufWriter`.
𝖭 `copy_file_range`/`splice`/`sendfile` until file size, EOF or the byte limit from `Take` is reached. This should generally be *much* more efficient than the read-write loop and also have other benefits such as DMA offload or extent sharing.
## Benchmarks
```
OLD
test io::tests::bench_file_to_file_copy ... bench: 21,002 ns/iter (+/- 750) = 6240 MB/s [ext4]
test io::tests::bench_file_to_file_copy ... bench: 35,704 ns/iter (+/- 1,108) = 3671 MB/s [btrfs]
test io::tests::bench_file_to_socket_copy ... bench: 57,002 ns/iter (+/- 4,205) = 2299 MB/s
test io::tests::bench_socket_pipe_socket_copy ... bench: 142,640 ns/iter (+/- 77,851) = 918 MB/s
NEW
test io::tests::bench_file_to_file_copy ... bench: 14,745 ns/iter (+/- 519) = 8889 MB/s [ext4]
test io::tests::bench_file_to_file_copy ... bench: 6,128 ns/iter (+/- 227) = 21389 MB/s [btrfs]
test io::tests::bench_file_to_socket_copy ... bench: 13,767 ns/iter (+/- 3,767) = 9520 MB/s
test io::tests::bench_socket_pipe_socket_copy ... bench: 26,471 ns/iter (+/- 6,412) = 4951 MB/s
```
Previously EOVERFLOW handling was only applied for io::copy specialization
but not for fs::copy sharing the same code.
Additionally we lower the chunk size to 1GB since we have a user report
that older kernels may return EINVAL when passing 0x8000_0000
but smaller values succeed.
Android builds use feature level 14, the libc wrapper for splice is gated
on feature level 21+ so we have to invoke the syscall directly.
Additionally the emulator doesn't seem to support it so we also have to
add ENOSYS checks.
Update thread and futex APIs to work with Emscripten
This updates the thread and futex APIs in `std` to match the APIs exposed by
Emscripten. This allows threads to run on `wasm32-unknown-emscripten` and the
thread parker to compile without errors related to the missing `futex` module.
To make use of this, Rust code must be compiled with `-C target-feature=atomics`
and Emscripten must link with `-pthread`.
I have confirmed this works well locally when building multithreaded crates.
Attempting to enable `std` thread tests currently fails for seemingly obscure
reasons and Emscripten is currently disabled in CI, so further work is needed to
have proper test coverage here.
This updates the thread and futex APIs in `std` to match the APIs exposed by
Emscripten. This allows threads to run on `wasm32-unknown-emscripten` and the
thread parker to compile without errors related to the missing `futex` module.
To make use of this, Rust code must be compiled with `-C target-feature=atomics`
and Emscripten must link with `-pthread`.
I have confirmed this works well locally when building multithreaded crates.
Attempting to enable `std` thread tests currently fails for seemingly obscure
reasons and Emscripten is currently disabled in CI, so further work is needed to
have proper test coverage here.
Duration::zero() -> Duration::ZERO
In review for #72790, whether or not a constant or a function should be favored for `#![feature(duration_zero)]` was seen as an open question. In https://github.com/rust-lang/rust/issues/73544#issuecomment-691701670 an invitation was opened to either stabilize the methods or propose a switch to the constant value, supplemented with reasoning. Followup comments suggested community preference leans towards the const ZERO, which would be reason enough.
ZERO also "makes sense" beside existing associated consts for Duration. It is ever so slightly awkward to have a series of constants specifying 1 of various units but leave 0 as a method, especially when they are side-by-side in code. It seems unintuitive for the one non-dynamic value (that isn't from Default) to be not-a-const, which could hurt discoverability of the associated constants overall. Elsewhere in `std`, methods for obtaining a constant value were even deprecated, as seen with [std::u32::min_value](https://doc.rust-lang.org/std/primitive.u32.html#method.min_value).
Most importantly, ZERO costs less to use. A match supports a const pattern, but const fn can only be used if evaluated through a const context such as an inline `const { const_fn() }` or a `const NAME: T = const_fn()` declaration elsewhere. Likewise, while https://github.com/rust-lang/rust/issues/73544#issuecomment-691949373 notes `Duration::zero()` can optimize to a constant value, "can" is not "will". Only const contexts have a strong promise of such. Even without that in mind, the comment in question still leans in favor of the constant for simplicity. As it costs less for a developer to use, may cost less to optimize, and seems to have more of a community consensus for it, the associated const seems best.
r? ```@LukasKalbertodt```
The discussion seems to have resolved that this lint is a bit "noisy" in
that applying it in all places would result in a reduction in
readability.
A few of the trivial functions (like `Path::new`) are fine to leave
outside of closures.
The general rule seems to be that anything that is obviously an
allocation (`Box`, `Vec`, `vec![]`) should be in a closure, even if it
is a 0-sized allocation.
It was only ever used with Vec<u8> anyway. This simplifies some things.
- It no longer needs to be flushed, because that's a no-op anyway for
a Vec<u8>.
- Writing to a Vec<u8> never fails.
- No #[cfg(test)] code is needed anymore to use `realstd` instead of
`std`, because Vec comes from alloc, not std (like Write).
Define `fs::hard_link` to not follow symlinks.
POSIX leaves it [implementation-defined] whether `link` follows symlinks.
In practice, for example, on Linux it does not and on FreeBSD it does.
So, switch to `linkat`, so that we can pick a behavior rather than
depending on OS defaults.
Pick the option to not follow symlinks. This is somewhat arbitrary, but
seems the less surprising choice because hard linking is a very
low-level feature which requires the source and destination to be on
the same mounted filesystem, and following a symbolic link could end
up in a different mounted filesystem.
[implementation-defined]: https://pubs.opengroup.org/onlinepubs/9699919799/functions/link.html
Use Intra-doc links for std::io::buffered
Helps with #75080. I used the implicit link style for intrinsics, as that was what `minnumf32` and others already had.
``@rustbot`` modify labels: T-doc, A-intra-doc-links
r? ``@jyn514``
`#![deny(unsafe_op_in_unsafe_fn)]` in sys/hermit
Partial fix of #73904.
This encloses ``unsafe`` operations in ``unsafe fn`` in ``sys/hermit``.
Some unsafe blocks are not well documented because some system-based functions lack documents.
Partially fix#55002, deprecate in another release
Co-authored-by: Ashley Mannix <kodraus@hey.com>
Update stable version for stabilize_spin_loop
Co-authored-by: Joshua Nelson <joshua@yottadb.com>
Use better example for spinlock
As suggested by KodrAus
Remove renamed_spin_loop already available in master
Fix spin loop example
fix various aliasing issues in the standard library
This fixes various cases where the standard library either used raw pointers after they were already invalidated by using the original reference again, or created raw pointers for one element of a slice and used it to access neighboring elements.
Add note to process::arg[s] that args shouldn't be escaped or quoted
This came out of discussion on [forum](https://users.rust-lang.org/t/how-to-get-full-output-from-command/50626), where I recently asked a question and it turned out that the problem was redundant quotation:
```rust
Command::new("rg")
.arg("\"pattern\"") // this will look for "pattern" with quotes included
```
This is something that has bitten me few times already (in multiple languages actually), so It'd be grateful to have it in the docs, even though it's not sctrictly Rust specific problem. Other users also agreed.
This can be really annoying to debug, because in many cases (inluding mine), quotes can be legal part of the argument, so the command doesn't fail, it just behaves unexpectedly. Not everybody (including me) knows that quotes around arguments are part of the shell and not part of the called program. Coincidentally, somoene had the same problem [yesterday](https://www.reddit.com/r/rust/comments/jkxelc/going_crazy_over_running_a_curl_process_from_rust/) on reddit.
I am not a native speaker, so I welcome any corrections or better formulation, I don't expect this to be merged as is. I was also reminded that this is platform/shell specific behaviour, but I didn't find a good way to formulate that briefly, any ideas welcome.
It's also my first PR here, so I am not sure I did everything correctly, I did this just from Github UI.
make exp_m1 and ln_1p examples more representative of use
With this PR, the examples for `exp_m1` would fail if `x.exp() - 1.0` is used instead of `x.exp_m1()`, and the examples for `ln_1p` would fail if `(x + 1.0).ln()` is used instead of `x.ln_1p()`.
Add std::panic::panic_any.
The discussion of #67984 lead to the conclusion that there should be a macro or function separate from `std::panic!()` for throwing arbitrary payloads, to make it possible to deprecate or disallow (in edition 2021) `std::panic!(arbitrary_payload)`.
Alternative names:
- `panic_with!(..)`
- ~~`start_unwind(..)`~~ (panicking doesn't always unwind)
- `throw!(..)`
- `panic_throwing!(..)`
- `panic_with_value(..)`
- `panic_value(..)`
- `panic_with(..)`
- `panic_box(..)`
- `panic(..)`
The equivalent (private, unstable) function in `libstd` is called `std::panicking::begin_panic`.
I suggest `panic_any`, because it allows for any (`Any + Send`) type.
_Tracking issue: #78500_
Uplift `temporary-cstring-as-ptr` lint from `clippy` into rustc
The general consensus seems to be that this lint covers a common enough mistake to warrant inclusion in rustc.
The diagnostic message might need some tweaking, as I'm not sure the use of second-person perspective matches the rest of rustc, but I'd like to hear others' thoughts on that.
(cc #53224).
r? `@oli-obk`
Capture output from threads spawned in tests
This is revival of #75172.
Original text:
> Fixes#42474.
>
> r? `@dtolnay` since you expressed interest in this, but feel free to redirect if you aren't the right person anymore.
---
Closes#75172.
Updated the added documentation in llvm_util.rs to note which copies of LLVM need to be inspected.
Removed avx512bf16 and avx512vp2intersect because they are unsupported before LLVM 9 with the build with external LLVM 8 being supported
Re-introduced detection testing previously removed for un-requestable features tsc and mmx
`#[deny(unsafe_op_in_unsafe_fn)]` in sys/wasm
This is part of #73904.
This encloses unsafe operations in unsafe fn in `libstd/sys/wasm`.
@rustbot modify labels: F-unsafe-block-in-unsafe-fn
`movbe` seems to not be a run-time detectable feature on x86.
It has thus been removed from the list.
It was only commented out to ease comparison against the full list.
This PR both adds in-source documentation on what to look out for
when adding a new (X86) feature set and adds all that are detectable at run-time in Rust stable
as of 1.27.0.
This should only enable the use of the corresponding LLVM intrinsics.
Actual intrinsics need to be added separately in rust-lang/stdarch.
It also re-orders the run-time-detect test statements to be more consistent
with the actual list of intrinsics whitelisted and removes underscores not present
in the actual names (which might be mistaken as being part of the name)
replace `#[allow_internal_unstable]` with `#[rustc_allow_const_fn_unstable]` for `const fn`s
`#[allow_internal_unstable]` is currently used to side-step feature gate and stability checks.
While it was originally only meant to be used only on macros, its use was expanded to `const fn`s.
This pr adds stricter checks for the usage of `#[allow_internal_unstable]` (only on macros) and introduces the `#[rustc_allow_const_fn_unstable]` attribute for usage on `const fn`s.
This pr does not change any of the functionality associated with the use of `#[allow_internal_unstable]` on macros or the usage of `#[rustc_allow_const_fn_unstable]` (instead of `#[allow_internal_unstable]`) on `const fn`s (see https://github.com/rust-lang/rust/issues/69399#issuecomment-712911540).
Note: The check for `#[rustc_allow_const_fn_unstable]` currently only validates that the attribute is used on a function, because I don't know how I would check if the function is a `const fn` at the place of the check. I therefore openend this as a 'draft pull request'.
Closesrust-lang/rust#69399
r? @oli-obk
Throw core::panic!("message") as &str instead of String.
This makes `core::panic!("message")` consistent with `std::panic!("message")`, which throws a `&str` and not a `String`.
This also makes any other panics from `core::panicking::panic` result in a `&str` rather than a `String`, which includes compiler-generated panics such as the panics generated for `mem::zeroed()`.
---
Demonstration:
```rust
use std::panic;
use std::any::Any;
fn main() {
panic::set_hook(Box::new(|panic_info| check(panic_info.payload())));
check(&*panic::catch_unwind(|| core::panic!("core")).unwrap_err());
check(&*panic::catch_unwind(|| std::panic!("std")).unwrap_err());
}
fn check(msg: &(dyn Any + Send)) {
if let Some(s) = msg.downcast_ref::<String>() {
println!("Got a String: {:?}", s);
} else if let Some(s) = msg.downcast_ref::<&str>() {
println!("Got a &str: {:?}", s);
}
}
```
Before:
```
Got a String: "core"
Got a String: "core"
Got a &str: "std"
Got a &str: "std"
```
After:
```
Got a &str: "core"
Got a &str: "core"
Got a &str: "std"
Got a &str: "std"
```
revise Hermit's mutex interface to support the behaviour of StaticMutex
rust-lang/rust#77147 simplifies things by splitting this Mutex type into two types matching the two use cases: StaticMutex and MovableMutex. To support the new behavior of StaticMutex, we move part of the mutex implementation into libstd.
The interface to the OS changed. Consequently, I removed a few functions, which aren't longer needed.
According to [the bionic status page], `linkat` has only been available
since API level 21. Since Android is based on Linux and Linux's `link`
doesn't follow symlinks, just use `link` on Android.
[the bionic status page]: https://android.googlesource.com/platform/bionic/+/master/docs/status.md
