`SelectionError` used to be 80 bytes (on 64 bit). That's quite big.
Especially because the selection cache contained `Result<_,
SelectionError>. The Ok type is only 32 bytes, so the 80 bytes
significantly inflate the size of the cache.
Most variants of the `SelectionError` seem to be hard errors, only
`Unimplemented` shows up in practice (for cranelift-codegen, it occupies
23.4% of all cache entries). We can just box away the biggest variant,
`OutputTypeParameterMismatch`, to get the size down to 16 bytes, well
within the size of the Ok type inside the cache.
Min specialization improvements
- Don't allow specialization impls with no items, such implementations are probably not correct and only occur as mistakes in the compiler and standard library
- Fix a missing normalization call
- Adds spans for lifetime errors from overly general specializations
Closes#79457Closes#109815
Introduce `AliasKind::Inherent` for inherent associated types
Allows us to check (possibly generic) inherent associated types for well-formedness.
Type inference now also works properly.
Follow-up to #105961. Supersedes #108430.
Fixes#106722.
Fixes#108957.
Fixes#109768.
Fixes#109789.
Fixes#109790.
~Not to be merged before #108860 (`AliasKind::Weak`).~
CC `@jackh726`
r? `@compiler-errors`
`@rustbot` label T-types F-inherent_associated_types
Fix lifetime suggestion for type aliases with objects in them
Fixes an issue identified in https://github.com/rust-lang/rust/issues/110761#issuecomment-1520678479
This suggestion, like many other borrowck suggestions, are very fragile and there are other ways to trigger strange behavior even after this PR, so this is just a small improvement and not a total rework 💀
Make `(try_)subst_and_normalize_erasing_regions` take `EarlyBinder`
Changes `subst_and_normalize_erasing_regions` and `try_subst_and_normalize_erasing_regions` to take `EarlyBinder<T>` instead of `T`.
(related to #105779)
This was suggested by `@BoxyUwU` in https://github.com/rust-lang/rust/pull/107753#discussion_r1105828139. After changing `type_of` to return `EarlyBinder`, there were several places where the binder was immediately skipped to call `tcx.subst_and_normalize_erasing_regions`, only for the binder to be reconstructed inside of that method.
r? `@BoxyUwU`
Support return-type bounds on associated methods from supertraits
Support `T: Trait<method(): Bound>` when `method` comes from a supertrait, aligning it with the behavior of associated type bounds (both equality and trait bounds).
The only wrinkle is that I have to extend `super_predicates_that_define_assoc_type` to look for *all* items, not just `AssocKind::Ty`. This will also be needed to support `feature(associated_const_equality)` as well, which is subtly broken when it comes to supertraits, though this PR does not fix those yet. There's a slight chance there's a perf regression here, in which case I guess I could split it out into a separate query.
More robust debug assertions for `Instance::resolve` on built-in traits with non-standard trait items
In #111264, a user added a new item to the `Future` trait, but the code in [`resolve_associated_item`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_ty_utils/instance/fn.resolve_associated_item.html) implicitly assumes that the `Future` trait is defined with only one method (`Future::poll`) and treats the generator body as the implementation of that method.
This PR adds some debug assertions to make sure that that new methods defined on `Future`/`Generator`/etc. don't accidentally resolve to the wrong item when they are added, and adds a helpful comment guiding a compiler dev (or curious `#![no_core]` user) to what must be done to support adding new associated items to these built-in implementations.
I am open to discuss whether a test should be added, but I chose against it because I opted to make these `bug!()`s instead of, e.g., diagnostics or fatal errors. Arguably it doesn't need a test because it's not a bug that can be triggered by an end user, and internal-facing misuses of core kind of touch on rust-lang/compiler-team#620 -- however, I think the assertions I added in this PR are still a very useful way to make sure this bug doesn't waste debugging resources down the line.
Fixes#111264
Use fulfillment to check `Drop` impl compatibility
Use an `ObligationCtxt` to ensure that a `Drop` impl does not have stricter requirements than the ADT that it's implemented for, rather than using a `SimpleEqRelation` to (more or less) syntactically equate predicates on an ADT with predicates on an impl.
r? types
### Some background
The old code reads:
```rust
// An earlier version of this code attempted to do this checking
// via the traits::fulfill machinery. However, it ran into trouble
// since the fulfill machinery merely turns outlives-predicates
// 'a:'b and T:'b into region inference constraints. It is simpler
// just to look for all the predicates directly.
```
I'm not sure what this means, but perhaps in the 8 years since that this comment was written (cc #23638) it's gotten easier to process region constraints after doing fulfillment? I don't know how this logic differs from anything we do in the `compare_impl_item` module. Ironically, later on it says:
```rust
// However, it may be more efficient in the future to batch
// the analysis together via the fulfill (see comment above regarding
// the usage of the fulfill machinery), rather than the
// repeated `.iter().any(..)` calls.
```
Also:
* Removes `SimpleEqRelation` which was far too syntactical in its relation.
* Fixes#110557
Such implementations are usually mistakes and are not used in the
compiler or standard library (after this commit) so forbid them with
`min_specialization`.
check array type of repeat exprs is wf
Fixes#111091
Also makes sure that we actually renumber regions in the length of repeat exprs which we previously weren't doing and would cause ICEs in `adt_const_params` + `generic_const_exprs` from attempting to prove the wf goals when the length was an unevaluated constant with `'erased` in the `ty` field of `Const`
The duplicate errors are caused by the fact that `const_arg_to_const`/`array_len_to_const` in `FnCtxt` adds a `WellFormed` goal for the created `Const` which is also checked by the added `WellFormed(array_ty)`. I don't want to change this to just emit a `T: Sized` goal for the element type since that would ignore `ConstArgHasType` wf requirements and generally uncomfortable with the idea of trying to sync up `wf::obligations` for arrays and the code in hir typeck for repeat exprs.
r? `@compiler-errors`
correctly recurse when expanding anon consts
recursing with `super_fold_with` is wrong in case `bac` is itself normalizable, the test that was supposed to test for this being wrong did not actually test for this in reality because of the usage of `{ (N) }` instead of `{{ N }}`. The former resulting in a simple `ConstKind::Param` instead of `ConstKind::Unevaluated`. Tbh generally this test seems very brittle and it will be a lot easier to test once we have normalization of assoc consts since then we can just test that `T::ASSOC` normalizes to some `U::OTHER` which normalizes to some third thing.
r? `@compiler-errors`
Explicitly reject negative and reservation drop impls
Fixes#110858
It doesn't really make sense for a type to have a `!Drop` impl. Or at least, I don't want us to implicitly assign a meaning to it by the way the compiler *currently* handles it (incompletely), and rather I would like to see a PR (or an RFC...) assign a meaning to `!Drop` if we actually wanted one for it.
In #110927 the encode/decode methods for `i8`, `char`, `bool`, and `str`
were made inherent. This commit removes some unnecessary implementations
of these methods that were missed in that PR.
Add cross-language LLVM CFI support to the Rust compiler
This PR adds cross-language LLVM Control Flow Integrity (CFI) support to the Rust compiler by adding the `-Zsanitizer-cfi-normalize-integers` option to be used with Clang `-fsanitize-cfi-icall-normalize-integers` for normalizing integer types (see https://reviews.llvm.org/D139395).
It provides forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space). For more information about LLVM CFI and cross-language LLVM CFI support for the Rust compiler, see design document in the tracking issue #89653.
Cross-language LLVM CFI can be enabled with -Zsanitizer=cfi and -Zsanitizer-cfi-normalize-integers, and requires proper (i.e., non-rustc) LTO (i.e., -Clinker-plugin-lto).
Thank you again, ``@bjorn3,`` ``@nikic,`` ``@samitolvanen,`` and the Rust community for all the help!
This commit adds cross-language LLVM Control Flow Integrity (CFI)
support to the Rust compiler by adding the
`-Zsanitizer-cfi-normalize-integers` option to be used with Clang
`-fsanitize-cfi-icall-normalize-integers` for normalizing integer types
(see https://reviews.llvm.org/D139395).
It provides forward-edge control flow protection for C or C++ and Rust
-compiled code "mixed binaries" (i.e., for when C or C++ and Rust
-compiled code share the same virtual address space). For more
information about LLVM CFI and cross-language LLVM CFI support for the
Rust compiler, see design document in the tracking issue #89653.
Cross-language LLVM CFI can be enabled with -Zsanitizer=cfi and
-Zsanitizer-cfi-normalize-integers, and requires proper (i.e.,
non-rustc) LTO (i.e., -Clinker-plugin-lto).
Avoid ICEing miri on layout query cycles
Miri has special logic for catching panics during interpretation. Raising a fatal error in rustc uses unwinding to abort compilation. Thus miri ends up catching that fatal error and thinks it saw an ICE. While we should probably change that to ignore `Fatal` payloads, I think it's also neat to continue compilation after a layout query cycle 😆
Query cycles now (in addition to reporting an error just like before), return `Err(Cycle)` instead of raising a fatal error. This allows the interpreter to wind down via the regular error paths.
r? `@RalfJung` for a first round, feel free to reroll for the compiler team once the miri side looks good
Implement negative bounds for internal testing purposes
Implements partial support the `!` negative polarity on trait bounds. This is incomplete, but should allow us to at least be able to play with the feature.
Not even gonna consider them as a public-facing feature, but I'm implementing them because would've been nice to have in UI tests, for example in #110671.
Currently a `{D,Subd}iagnosticMessage` can be created from any type that
impls `Into<String>`. That includes `&str`, `String`, and `Cow<'static,
str>`, which are reasonable. It also includes `&String`, which is pretty
weird, and results in many places making unnecessary allocations for
patterns like this:
```
self.fatal(&format!(...))
```
This creates a string with `format!`, takes a reference, passes the
reference to `fatal`, which does an `into()`, which clones the
reference, doing a second allocation. Two allocations for a single
string, bleh.
This commit changes the `From` impls so that you can only create a
`{D,Subd}iagnosticMessage` from `&str`, `String`, or `Cow<'static,
str>`. This requires changing all the places that currently create one
from a `&String`. Most of these are of the `&format!(...)` form
described above; each one removes an unnecessary static `&`, plus an
allocation when executed. There are also a few places where the existing
use of `&String` was more reasonable; these now just use `clone()` at
the call site.
As well as making the code nicer and more efficient, this is a step
towards possibly using `Cow<'static, str>` in
`{D,Subd}iagnosticMessage::{Str,Eager}`. That would require changing
the `From<&'a str>` impls to `From<&'static str>`, which is doable, but
I'm not yet sure if it's worthwhile.
Make some simple queries no longer cache on disk
I don't think we need to cache queries with really simple local providers, like loading hir and accessing an attr
r? `@ghost`
Tweak await span to not contain dot
Fixes a discrepancy between method calls and await expressions where the latter are desugared to have a span that *contains* the dot (i.e. `.await`) but method call identifiers don't contain the dot. This leads to weird suggestions suggestions in borrowck -- see linked issue.
Fixes#110761
This mostly touches a bunch of tests to tighten their `await` span.
Remove `QueryEngine` trait
This removes the `QueryEngine` trait and `Queries` from `rustc_query_impl` and replaced them with function pointers and fields in `QuerySystem`. As a side effect `OnDiskCache` is moved back into `rustc_middle` and the `OnDiskCache` trait is also removed.
This has a couple of benefits.
- `TyCtxt` is used in the query system instead of the removed `QueryCtxt` which is larger.
- Function pointers are more flexible to work with. A variant of https://github.com/rust-lang/rust/pull/107802 is included which avoids the double indirection. For https://github.com/rust-lang/rust/pull/108938 we can name entry point `__rust_end_short_backtrace` to avoid some overhead. For https://github.com/rust-lang/rust/pull/108062 it avoids the duplicate `QueryEngine` structs.
- `QueryContext` now implements `DepContext` which avoids many `dep_context()` calls in `rustc_query_system`.
- The `rustc_driver` size is reduced by 0.33%, hopefully that means some bootstrap improvements.
- This avoids the unsafe code around the `QueryEngine` trait.
r? `@cjgillot`
I was curious about how many `Encodable`/`Decodable` derives we have.
Some grepping revealed that it's over 500 of each, but the number of
`Encodable` ones was higher, which was weird. Most of the
`Encodable`-only ones were in `hir.rs`. This commit removes them all,
plus some other unnecessary derives in that file and others that I found
via trial and error.
Rewrite MemDecoder around pointers not a slice
This is basically https://github.com/rust-lang/rust/pull/109910 but I'm being a lot more aggressive. The pointer-based structure means that it makes a lot more sense to absorb more complexity into `MemDecoder`, most of the diff is just complexity moving from one place to another.
The primary argument for this structure is that we only incur a single bounds check when doing multi-byte reads from a `MemDecoder`. With the slice-based implementation we need to do those with `data[position..position + len]` , which needs to account for `position + len` wrapping. It would be possible to dodge the first bounds check if we stored a slice that starts at `position`, but that would require updating the pointer and length on every read.
This PR also embeds the failure path in a separate function, which means that this PR should subsume all the perf wins observed in https://github.com/rust-lang/rust/pull/109867.
Use `?0` notation for ty/ct/int/float/region vars
Aligns the notation for infer vars that T-types and friends most often uses for inference variables with the notation in the compiler (which is kinda a sigil nightmare IMO: `_#`) by adopting `?0` style infer vars.
This mostly affects debug output since verbose infer vars shouldn't show up in user-facing places.
Does this need an MCP? It's debug output, so I'm thinking no, but happy to open one. 🤔
r? types
Consider polarity in new solver
It's kinda ugly to have a polarity check in all of the builtin impls -- I guess I could consider the polarity at the top of assemble-builtin but that would require adding a polarity fn to `GoalKind`...
🤷 putting this up just so i dont forget, since it's needed to bootstrap core during coherence (this alone does not allow core to bootstrap though, additional work is needed!)
r? ``@lcnr``
Add `impl_tag!` macro to implement `Tag` for tagged pointer easily
r? `@Nilstrieb`
This should also lifts the need to think about safety from the callers (`impl_tag!` is robust (ish, see the macro issue)) and removes the possibility of making a "weird" `Tag` impl.
Switch to `EarlyBinder` for `explicit_item_bounds`
Part of the work to finish https://github.com/rust-lang/rust/issues/105779.
This PR adds `EarlyBinder` to the return type of the `explicit_item_bounds` query and removes `bound_explicit_item_bounds`.
r? `@compiler-errors` (hope it's okay to request you, since you reviewed #110299 and #110498😃)
Add size asserts for MIR `SourceScopeData` & `VarDebugInfo`
There's vectors of both of these in `mir::Body`, so might as well track them.
(I was pondering adding something to one or the other, so wanted this to see the memory impact.)
