Improve opaque pointers support
Opaque pointers are coming, and rustc is not ready.
This adds partial support by passing an explicit load type to LLVM. Two issues I've encountered:
* The necessary type was not available at the point where non-temporal copies were generated. I've pushed the code for that upwards out of the memcpy implementation and moved the position of a cast to make do with the types we have available. (I'm not sure that cast is needed at all, but have retained it in the interest of conservativeness.)
* The `PlaceRef::project_deref()` function used during debuginfo generation seems to be buggy in some way -- though I haven't figured out specifically what it does wrong. Replacing it with `load_operand().deref()` did the trick, but I don't really know what I'm doing here.
remove const_raw_ptr_to_usize_cast feature
This feature currently has the strange status of "const-only `unsafe`", which was an experiment that we no longer think is a good idea. We need to find better ways to enable things like "messing with the low bits of a pointer" during CTFE.
r? `@oli-obk`
Fix several ICEs related to malformed `#[repr(...)]` attributes
This PR fixes#83921. #83921 actually contains two related but distinct issues (one of them incorrectly reported as a duplicate in https://github.com/rust-lang/rust/issues/83921#issuecomment-814640734):
In the first, a call to `delay_span_bug` leads to an ICE when compiling with `-Zunpretty=everybody_loops` (and some other pretty-printing modes), because the corresponding error is emitted in a later pass, which does not run when only pretty-printing is requested.
The second issue is about parsing `#[repr(...)]` attributes. Currently, all of the following cause an ICE when applied to a struct/enum:
```rust
#[repr(packed())]
#[repr(align)]
#[repr(align(2, 4))]
#[repr(align())]
#[repr(i8())]
#[repr(u32(42))]
#[repr(i64 = 2)]
```
I have fixed this by expanding the well-formedness checks in `find_repr_attrs()`.
Revert the revert of renaming traits::VTable to ImplSource
As #72114 and #73055 were merged so closely together I think this
accidentally happened while rebasing
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
Support forwarding caller location through trait object method call
Since PR #69251, the `#[track_caller]` attribute has been supported on
traits. However, it only has an effect on direct (monomorphized) method
calls. Calling a `#[track_caller]` method on a trait object will *not*
propagate caller location information - instead, `Location::caller()` will
return the location of the method definition.
This PR forwards caller location information when `#[track_caller]` is
present on the method definition in the trait. This is possible because
`#[track_caller]` in this position is 'inherited' by any impls of that
trait, so all implementations will have the same ABI.
This PR does *not* change the behavior in the case where
`#[track_caller]` is present only on the impl of a trait.
While all implementations of the method might have an explicit
`#[track_caller]`, we cannot know this at codegen time, since other
crates may have impls of the trait. Therefore, we keep the current
behavior of not forwarding the caller location, ensuring that all
implementations of the trait will have the correct ABI.
See the modified test for examples of how this works
only check cg defaults wf once instantiated
the previous fixmes here didn't make too much sense as I didn't yet fully understand the code further below.
That code only runs if the predicates using our generic param default are fully concrete after substituting our default, which never happens if our default is generic.
r? `@oli-obk` `@BoxyUwU`
Remove `missing_docs` lint on private 2.0 macros
798baebde1/compiler/rustc_lint/src/builtin.rs (L573-L584)
This code is the source of #57569. The problem is subtle, so let me point it out. This code makes the mistake of assuming that all of the macros in `krate.exported_macros` are exported.
...Yeah. For some historical reason, all `macro` macros are marked as exported, regardless of whether they actually are, which is dreadfully confusing. It would be more accurate to say that `exported_macros` currently contains only macros that have paths.
This PR renames `exported_macros` to `importable_macros`, since these macros can be imported with `use` while others cannot. It also fixes the code above to no longer lint on private `macro` macros, since the `missing_docs` lint should only appear on exported items.
Fixes#57569.
Add support for raw-dylib with stdcall, fastcall functions
Next stage of work for #58713: allow `extern "stdcall"` and `extern "fastcall"` with `#[link(kind = "raw-dylib")]`.
I've deliberately omitted support for vectorcall, as that doesn't currently work, and I wanted to get this out for review. (I haven't really investigated the vectorcall failure much yet, but at first (very cursory) glance it appears that the problem is elsewhere.)
Simply shift the bitcast from the store to the load, so that
we can use the destination type. I'm not sure the bitcast is
really necessary, but keeping it for now.
I'm not really sure what is wrong here, but I was getting load
type mismatches in the debuginfo code (which is the only place
using this function).
Replacing the project_deref() implementation with a generic
load_operand + deref did the trick.
This makes load generation compatible with opaque pointers.
The generation of nontemporal copies still accesses the pointer
element type, as fixing this requires more movement.
Use #[track_caller] in const panic diagnostics.
This change stops const panic diagnostics from reporting inside #[track_caller] functions by skipping over them.
Change linked tracking issue for more_qualified_paths
This updates the linked tracking issue for the `more_qualified_paths` feature from the implementation PR #80080 to an actual tracking issue #86935.
Fix double warning about illegal floating-point literal pattern
This PR fixes#86600. The problem is that the `ConstToPat` struct contains a field `include_lint_checks`, which determines whether lints should be emitted or not, but this field is currently not obeyed at one point, leading to a warning being emitted more than once. I have fixed this behavior here.
Account for capture kind in auto traits migration
Modifies the current auto traits migration for RFC2229 so it takes into account capture kind
Closes https://github.com/rust-lang/project-rfc-2229/issues/51
r? `@nikomatsakis`
2229: Reduce the size of closures with `capture_disjoint_fields`
One key observation while going over the closure size profile of rustc
was that we are disjointly capturing one or more fields starting at an
immutable reference.
Disjoint capture over immutable reference doesn't add too much value
because the fields can either be borrowed immutably or copied.
One possible edge case of the optimization is when a fields of a struct
have a longer lifetime than the structure, therefore we can't completely
get rid of all the accesses on top of sharef refs, only the rightmost
one. Here is a possible example:
```rust
struct MyStruct<'a> {
a: &'static A,
b: B,
c: C<'a>,
}
fn foo<'a, 'b>(m: &'a MyStruct<'b>) -> impl FnMut() + 'static {
let c = || drop(&*m.a.field_of_a);
// Here we really do want to capture `*m.a` because that outlives `'static`
// If we capture `m`, then the closure no longer outlives `'static'
// it is constrained to `'a`
}
```
r? `@nikomatsakis`
- Add `:Sized` assertion in interpreter impl
- Use `Scalar::from_bool` instead of `ScalarInt: From<bool>`
- Remove unneeded comparison in intrinsic typeck
- Make this UB to call with undef, not just return undef in that case
Checking that function is const if marked with rustc_const_unstable
Fixes#69630
This one is still missing tests to check the behavior but I checked by hand and it seemed to work.
I would not mind some direction for writing those unit tests!
Use diagnostic items instead of lang items for rfc2229 migrations
This PR removes the `Send`, `UnwindSafe` and `RefUnwindSafe` lang items introduced in https://github.com/rust-lang/rust/pull/84730, and uses diagnostic items instead to check for `Send`, `UnwindSafe` and `RefUnwindSafe` traits for RFC2229 migrations.
r? ```@nikomatsakis```
remove trailing newline
fix: test with attribute but missing const
Update compiler/rustc_passes/src/stability.rs
Co-authored-by: Léo Lanteri Thauvin <leseulartichaut@gmail.com>
Add test for extern functions
fix: using span_help instead of span_suggestion
add test for some ABIs + fmt fix
Update compiler/rustc_passes/src/stability.rs
Co-authored-by: Léo Lanteri Thauvin <leseulartichaut@gmail.com>
Refractor and add test for `impl const`
Add test to make sure no output + cleanup condition
-----------------------------
remove stdcall test, failing CI test
C abi is already tested in this, so it is not that useful to test another one.
The tested code is blind to which specific ABI for now, as long as it's not an intrinsic one
Fix ICE when misplaced visibility cannot be properly parsed
Fixes#86895
The issue was that a failure to parse the visibility was causing the original error to be dropped before being emitted.
The resulting error isn't quite as nice as when the visibility is parsed properly, but I'm not sure which error to prioritize here. Displaying both errors might be too confusing.
r? ```@estebank```
Sync rustc_codegen_cranelift
The main hightlight this sync is basic support for AArch64. Most things should work on Linux, but there does seem to be an ABI incompatibility causing proc-macros to crash, see https://github.com/bjorn3/rustc_codegen_cranelift/issues/1184. Thanks to ```@afonso360``` for implementing all Cranelift features that were necessary to compile for AArch64 using cg_clif. Also thanks to ```@shamatar``` for implementing the `llvm.x86.addcarry.64` and `llvm.x86.subborrow.64` llvm intrinsics used by num-bigint (https://github.com/bjorn3/rustc_codegen_cranelift/pull/1178) and ```@eggyal``` for implementing multi-threading support for the lazy jit mode. (https://github.com/bjorn3/rustc_codegen_cranelift/pull/1166)
r? ```@ghost```
```@rustbot``` label +A-codegen +A-cranelift +T-compiler
Recover from `&dyn mut ...` parse errors
Consider this example:
```rust
fn main() {
let r: &dyn mut Trait;
}
```
This currently leads to:
```
error: expected one of `!`, `(`, `;`, `=`, `?`, `for`, lifetime, or path, found keyword `mut`
--> src/main.rs:2:17
|
2 | let r: &dyn mut Trait;
| ^^^ expected one of 8 possible tokens
error: aborting due to previous error
```
However, especially for beginners, I think it is easy to get `&dyn mut` and `&mut dyn` confused. With my changes, I get a help message, and the parser even recovers:
```
error: `mut` must precede `dyn`
--> test.rs:2:12
|
2 | let r: &dyn mut Trait;
| ^^^^^^^^ help: place `mut` before `dyn`: `&mut dyn`
error[E0405]: cannot find trait `Trait` in this scope
--> test.rs:2:21
|
2 | let r: &dyn mut Trait;
| ^^^^^ not found in this scope
error: aborting due to 2 previous errors
```
Support lint tool names in rustc command line options
When rustc is running without a lint tool such as clippy enabled, options for lints such as `clippy::foo` are meant to be ignored. This was already working for those specified by attrs, such as `#![allow(clippy::foo)]`, but this did not work for command line arguments like `-A clippy::foo`. This PR fixes that issue.
Note that we discovered this issue while discussing https://github.com/rust-lang/cargo/issues/5034.
Fixes#86628.
This change merges `check_lint_and_tool_name` into `check_lint_name` in
order to avoid having two very similar functions.
Also adds the `.stderr` file back for the test case, since apparently
it is still needed.
All eabi targets have target_abi = "eabi".
All eabihf targets have target_abi = "eabihf".
armv6_unknown_freebsd and armv7_unknown_freebsd have target_abi = "eabihf".
All abi64 targets have target_abi = "abi64".
All ilp32 targets have target_abi = "ilp32".
All softfloat targets have target_abi = "softfloat".
All *-uwp-windows-* targets have target_abi = "uwp".
All spe targets have target_abi = "spe".
All macabi targets have target_abi = "macabi".
aarch64-apple-ios-sim has target_abi = "sim".
x86_64-fortanix-unknown-sgx has target_abi = "fortanix".
x86_64-unknown-linux-gnux32 has target_abi = "x32".
Add FIXME entries for targets for which existing values need to change
once cfg_target_abi becomes stable. (All of them are tier 3 targets.)
Add a test for target_abi in `--print cfg`.
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
This does not add an abi to any existing target.
Rename some Rust 2021 lints to better names
Based on conversation in https://github.com/rust-lang/rust/issues/85894.
Rename a bunch of Rust 2021 related lints:
Lints that are officially renamed because they are already in beta or stable:
* `disjoint_capture_migration` => `rust_2021_incompatible_closure_captures`
* `or_patterns_back_compat` => `rust_2021_incompatible_or_patterns`
* `non_fmt_panic` => `non_fmt_panics`
Lints that are renamed but don't require any back -compat work since they aren't yet in stable:
* `future_prelude_collision` => `rust_2021_prelude_collisions`
* `reserved_prefix` => `rust_2021_token_prefixes`
Lints that have been discussed but that I did not rename:
* ~`non_fmt_panic` and `bare_trait_object`: is making this plural worth the headache we might cause users?~
* `array_into_iter`: I'm unsure of a good name and whether bothering users with a name change is worth it.
r? `@nikomatsakis`
