Support `cargo dev bless` for tests with revisions
changelog: internal: Support `cargo dev bless` for tests with revisions
Previously bless wouldn't pick up the saved stderr from `target/debug/tests/manual_assert.stage-id.edition2021.stderr` or `target/debug/tests/manual_assert.stage-id.edition2018.stderr` due to there being multiple revisions of the test output
This tweaks compile-test so the built files end up in e.g. `target/debug/tests/ui`, `target/debug/tests/ui-cargo` rather than share the `tests` dir. `cargo dev bless` then uses that to update all the `.stdout/stdout/fixed` files it can find
Also removes an empty file I found, and the logic to remove empty outputs as compiletest doesn't produce empty `.stdout/stderr` files
Currently, any higher-ranked region errors involving opaque types
fall back to a generic "higher-ranked subtype error" message when
run under NLL. This PR adds better error message handling for this
case, giving us the same kinds of error messages that we currently
get without NLL:
```
error: implementation of `MyTrait` is not general enough
--> $DIR/opaque-hrtb.rs:12:13
|
LL | fn foo() -> impl for<'a> MyTrait<&'a str> {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ implementation of `MyTrait` is not general enough
|
= note: `impl MyTrait<&'2 str>` must implement `MyTrait<&'1 str>`, for any lifetime `'1`...
= note: ...but it actually implements `MyTrait<&'2 str>`, for some specific lifetime `'2`
error: aborting due to previous error
```
To accomplish this, several different refactoring needed to be made:
* We now have a dedicated `InstantiateOpaqueType` struct which
implements `TypeOp`. This is used to invoke `instantiate_opaque_types`
during MIR type checking.
* `TypeOp` is refactored to pass around a `MirBorrowckCtxt`, which is
needed to report opaque type region errors.
* We no longer assume that all `TypeOp`s correspond to canonicalized
queries. This allows us to properly handle opaque type instantiation
(which does not occur in a query) as a `TypeOp`.
A new `ErrorInfo` associated type is used to determine what
additional information is used during higher-ranked region error
handling.
* The body of `try_extract_error_from_fulfill_cx`
has been moved out to a new function `try_extract_error_from_region_constraints`.
This allows us to re-use the same error reporting code between
canonicalized queries (which can extract region constraints directly
from a fresh `InferCtxt`) and opaque type handling (which needs to take
region constraints from the pre-existing `InferCtxt` that we use
throughout MIR borrow checking).
add fut/back compat tests for implied trait bounds
the `guard` test was tested to cause a segfault with `-Zchalk`, very nice
cc ``@nikomatsakis`` #44491#25860
Use `NtCreateFile` instead of `NtOpenFile` to open a file
Generally the internal `Nt*` functions should be avoided but when we do need to use one we should stick to the most commonly used for the job. To that end, this PR replaces `NtOpenFile` with `NtCreateFile`.
NOTE: The initial version of this comment hypothesised that this may help with some recent false positives from malware scanners. This hypothesis proved wrong. Sorry for the distraction.
Don't constrain projection predicates with inference vars in GAT substs
cc #91762
Not a fix, but a mitigation to prevent a backwards-compatible hazard where we normalize using a predicate only because it's the only one available, but shouldn't. This would constrain an inference variable which didn't really want. We already do this when selecting a projection candidate, which isn't always correct. But changing that is a problem for a different day.
Also found out that a suggestion for `await`ing a future was using the wrong substs.
r? ``@nikomatsakis``
Do not suggest char literal for zero-length strings
PR #92507 adds a hint to switch to single quotes when a char is expected and a single-character string literal is provided.
The check to ensure the string literal is one character long missed the 0-char case, and would incorrectly offer the hint.
This PR adds the missing check, and a test case to confirm the new behavior.
Change `ResultShunt` to be generic over `Try`
Just a refactor (and rename) for now, so it's not `Result`-specific.
This could be used for a future `Iterator::try_collect`, or similar, but anything like that is left for a future PR.
The W3C Web Content Accessibility Guidelines specify a minimum line
spacing of 1.5 and a minimum paragraph spacing of 1.5 times the line
spacing. Our current line spacing (implemented by line-height) is 1.4,
so it's a small bump to go up to 1.5. Similarly, we have a paragraph
spacing of 0.6em. Bump that to 0.75em (which is 1.5 times the 0.5em
distance between lines).
Also, fix all the font sizes so instead of being round-ish numbers in
rem (like 1.1rem, 1.2rem), they are round numbers in pixels. Ensure each
font size is at least 2 pixels different than the nearest other font
size, so distinctions can be clearly seen. Overall the font-sizes are
mostly staying the same, being rounded up or down as appropriate.
Remove a few unused styles.
Simplify the display of the mobile-topbar location, by setting its
margins to auto rather than trying to size it exactly to the topbar.
Fix HashMap not displaying correctly in VS debugger
The natvis to render HashMaps was not working correctly in Visual Studio
because the type names for tuples changed from `tuple$<A, B>` to
`tuple$<A,B>` (notice the missing space). WinDbg and cdb continued to
parse this type name which is why no tests in CI broke. VS however is
slightly more strict and this caused the visualizer to break.
Since we cannot test the VS debugger in CI, I'm not checking in any
test changes.
Fixes#92286
r? `@michaelwoerister`
Currently, we are thinking to use *-unknown-none targets instead
to define for every platform our own one (see hermitcore/rusty-hermit#197).
However, the current target aarch64-unknown-none-softfloat doesn't support
dynamic relocation. Our kernel uses this feature and consequently
we define a new target aarch64-unknown-hermitkernel to support it.
Add in ValuePair::Term
This adds in an enum when matching on positions which can either be types or consts.
It will default to emitting old special cased error messages for types.
r? `@oli-obk`
cc `@matthiaskrgr`
Fixes#93578
rustdoc: Special-case macro lookups less
Previously, rustdoc had 3 fallbacks it used:
1. `resolve_macro_path`
2. `all_macros`
3. `resolve_str_path_error`
Ideally, it would only use `resolve_str_path_error`, to be consistent with other namespaces.
Unfortunately, that doesn't consider macros that aren't defined at module scope;
consider for instance
```rust
{
struct S;
macro_rules! mac { () => {} }
// `mac`'s scope starts here
/// `mac` <- `resolve_str_path_error` won't see this
struct Z;
//`mac`'s scope ends here
}
```
This changes it to only use `all_macros` and `resolve_str_path_error`, and gives
`resolve_str_path_error` precedence over `all_macros` in case there are two macros with the same
name in the same module.
This is a smaller version of https://github.com/rust-lang/rust/pull/91427.
r? `@petrochenkov`
update comment wrt const param defaults
after #93669 i looked through all other uses of `GenericParamKind::Const` again to detect if we missed the `default` there as well, but afaict we really only missed lifetime resolution '^^ at least i found an outdated comment :3
Include all contents of first line of scraped item in Rustdoc
This fixes#93528. When scraping examples, it extends the span of the enclosing item to include all characters up to the start of the first line of the span.
r? `@camelid`
Fix hover effects in sidebar
The dark and ayu themes have a menu-like highlight on sidebar items. The light theme used to, but it was accidentally lost in the sidebar unification. The change brings back the hover effect in the light theme.
It also makes the hover effect apply consistently to all links in the sidebar, including headings.
It also simplifies the "In _path_" heading so it's one big link. The breadcrumbs are still readily available at the top of the page.
Note that a small number of headings are not linkified and so don't get the hover effect. That will be fixed with #92957.
Demo: https://rustdoc.crud.net/jsha/sidebar-hover/std/string/trait.ToString.html
r? `@GuillaumeGomez`
Fixes#93115
Add `#[no_coverage]` tests for nested functions
I was playing around a bit trying to figure out how `#[no_coverage]` behaves for nested functions and thought I might as well add this as a testcase.
The "nesting covered fn inside not covered fn" case looks pretty much as expected.
The "nesting not covered fn inside a covered fn" case however seems a bit counterintuitive.
Essentially the region of the outer function "covers" its whole lexical range. And the inner function does not generate any region at all. 🤷🏻♂️
r? `@richkadel`
Add {floor,ceil}_char_boundary methods to str
This is technically already used internally by the standard library in the form of `truncate_to_char_boundary`.
Essentially these are two building blocks to allow for approximate string truncation, where you want to cut off the string at "approximately" a given length in bytes but don't know exactly where the character boundaries lie. It's also a good candidate for the standard library as it can easily be done naively, but would be difficult to properly optimise. Although the existing code that's done in error messages is done naively, this code will explicitly only check a window of 4 bytes since we know that a boundary must lie in that range, and because it will make it possible to vectorise.
Although this method doesn't take into account graphemes or other properties, this would still be a required building block for splitting that takes those into account. For example, if you wanted to split at a grapheme boundary, you could take your approximate splitting point and then determine the graphemes immediately following and preceeding the split. If you then notice that these two graphemes could be merged, you can decide to either include the whole grapheme or exclude it depending on whether you decide splitting should shrink or expand the string.
This takes the most conservative approach and just offers the raw indices to the user, and they can decide how to use them. That way, the methods are as useful as possible despite having as few methods as possible.
(Note: I'll add some tests and a tracking issue if it's decided that this is worth including.)
Add more *-unwind ABI variants
The following *-unwind ABIs are now supported:
- "C-unwind"
- "cdecl-unwind"
- "stdcall-unwind"
- "fastcall-unwind"
- "vectorcall-unwind"
- "thiscall-unwind"
- "aapcs-unwind"
- "win64-unwind"
- "sysv64-unwind"
- "system-unwind"
cc `@rust-lang/wg-ffi-unwind`
Previous efforts to ignore partially consumed values meant we were also
not considering borrows of a projection. This led to cases where we'd
miss borrowed types which MIR expected to be there, leading to ICEs.
Lazy type-alias-impl-trait
Previously opaque types were processed by
1. replacing all mentions of them with inference variables
2. memorizing these inference variables in a side-table
3. at the end of typeck, resolve the inference variables in the side table and use the resolved type as the hidden type of the opaque type
This worked okayish for `impl Trait` in return position, but required lots of roundabout type inference hacks and processing.
This PR instead stops this process of replacing opaque types with inference variables, and just keeps the opaque types around.
Whenever an opaque type `O` is compared with another type `T`, we make the comparison succeed and record `T` as the hidden type. If `O` is compared to `U` while there is a recorded hidden type for it, we grab the recorded type (`T`) and compare that against `U`. This makes implementing
* https://github.com/rust-lang/rfcs/pull/2515
much simpler (previous attempts on the inference based scheme were very prone to ICEs and general misbehaviour that was not explainable except by random implementation defined oddities).
r? `@nikomatsakis`
fixes#93411fixes#88236
Just a refactor (and rename) for now, so it's not `Result`-specific.
This could be used for a future `Iterator::try_collect`, or similar, but anything like that is left for a future PR.
