The [associated RFC][rfc] for possibly splitting out `flush` has been closed and
as a result there are no more blockers for stabilizing this method, so this
commit marks the method as such.
[rfc]: https://github.com/rust-lang/rfcs/pull/950
r? @alexcrichton or @aturon
This still needs to somehow figure out how to avoid unstable warnings arising from the use of unstable functions. I tried to use `#[allow_internal_unstable]` but it still spits out warnings as far as I can see. @huonw (I think you implemented it) does `#[allow_internal_unstable]` not work for some reason or am I using it incorrectly?
The new `std::io` module has had some time to bake now, and this commit
stabilizes its functionality. There are still portions of the module which
remain unstable, and below contains a summart of the actions taken.
This commit also deprecates the entire contents of the `old_io` module in a
blanket fashion. All APIs should now have a reasonable replacement in the
new I/O modules.
Stable APIs:
* `std::io` (the name)
* `std::io::prelude` (the name)
* `Read`
* `Read::read`
* `Read::{read_to_end, read_to_string}` after being modified to return a `usize`
for the number of bytes read.
* `Write`
* `Write::write`
* `Write::{write_all, write_fmt}`
* `BufRead`
* `BufRead::{fill_buf, consume}`
* `BufRead::{read_line, read_until}` after being modified to return a `usize`
for the number of bytes read.
* `BufReader`
* `BufReader::{new, with_capacity}`
* `BufReader::{get_ref, get_mut, into_inner}`
* `{Read,BufRead} for BufReader`
* `BufWriter`
* `BufWriter::{new, with_capacity}`
* `BufWriter::{get_ref, get_mut, into_inner}`
* `Write for BufWriter`
* `IntoInnerError`
* `IntoInnerError::{error, into_inner}`
* `{Error,Display} for IntoInnerError`
* `LineWriter`
* `LineWriter::{new, with_capacity}` - `with_capacity` was added
* `LineWriter::{get_ref, get_mut, into_inner}` - `get_mut` was added)
* `Write for LineWriter`
* `BufStream`
* `BufStream::{new, with_capacities}`
* `BufStream::{get_ref, get_mut, into_inner}`
* `{BufRead,Read,Write} for BufStream`
* `stdin`
* `Stdin`
* `Stdin::lock`
* `Stdin::read_line` - added method
* `StdinLock`
* `Read for Stdin`
* `{Read,BufRead} for StdinLock`
* `stdout`
* `Stdout`
* `Stdout::lock`
* `StdoutLock`
* `Write for Stdout`
* `Write for StdoutLock`
* `stderr`
* `Stderr`
* `Stderr::lock`
* `StderrLock`
* `Write for Stderr`
* `Write for StderrLock`
* `io::Result`
* `io::Error`
* `io::Error::last_os_error`
* `{Display, Error} for Error`
Unstable APIs:
(reasons can be found in the commit itself)
* `Write::flush`
* `Seek`
* `ErrorKind`
* `Error::new`
* `Error::from_os_error`
* `Error::kind`
Deprecated APIs
* `Error::description` - available via the `Error` trait
* `Error::detail` - available via the `Display` implementation
* `thread::Builder::{stdout, stderr}`
Changes in functionality:
* `old_io::stdio::set_stderr` is now a noop as the infrastructure for printing
backtraces has migrated to `std::io`.
* The `ReadExt`, `WriteExt`, and `BufReadExt` extension traits were all removed
by folding functionality into the corresponding trait.
[breaking-change]
The new `io` module has had some time to bake and this commit stabilizes some of
the utilities associated with it. This commit also deprecates a number of
`std::old_io::util` functions and structures.
These items are now `#[stable]`
* `Cursor`
* `Cursor::{new, into_inner, get_ref, get_mut, position, set_position}`
* Implementations of I/O traits for `Cursor<T>`
* Delegating implementations of I/O traits for references and `Box` pointers
* Implementations of I/O traits for primitives like slices and `Vec<T>`
* `ReadExt::bytes`
* `Bytes` (and impls)
* `ReadExt::chain`
* `Chain` (and impls)
* `ReadExt::take` (and impls)
* `BufReadExt::lines`
* `Lines` (and impls)
* `io::copy`
* `io::{empty, Empty}` (and impls)
* `io::{sink, Sink}` (and impls)
* `io::{repeat, Repeat}` (and impls)
These items remain `#[unstable]`
* Core I/O traits. These may want a little bit more time to bake along with the
commonly used methods like `read_to_end`.
* `BufReadExt::split` - this function may be renamed to not conflict with
`SliceExt::split`.
* `Error` - there are a number of questions about its representation,
`ErrorKind`, and usability.
These items are now `#[deprecated]` in `old_io`
* `LimitReader` - use `take` instead
* `NullWriter` - use `io::sink` instead
* `ZeroReader` - use `io::repeat` instead
* `NullReader` - use `io::empty` instead
* `MultiWriter` - use `broadcast` instead
* `ChainedReader` - use `chain` instead
* `TeeReader` - use `tee` instead
* `copy` - use `io::copy` instead
[breaking-change]
The new `io` module has had some time to bake and this commit stabilizes some of
the utilities associated with it. This commit also deprecates a number of
`std::old_io::util` functions and structures.
These items are now `#[stable]`
* `Cursor`
* `Cursor::{new, into_inner, get_ref, get_mut, position, set_position}`
* Implementations of I/O traits for `Cursor<T>`
* Delegating implementations of I/O traits for references and `Box` pointers
* Implementations of I/O traits for primitives like slices and `Vec<T>`
* `ReadExt::bytes`
* `Bytes` (and impls)
* `ReadExt::chain`
* `Chain` (and impls)
* `ReadExt::take` (and impls)
* `BufReadExt::lines`
* `Lines` (and impls)
* `io::copy`
* `io::{empty, Empty}` (and impls)
* `io::{sink, Sink}` (and impls)
* `io::{repeat, Repeat}` (and impls)
These items remain `#[unstable]`
* Core I/O traits. These may want a little bit more time to bake along with the
commonly used methods like `read_to_end`.
* `BufReadExt::split` - this function may be renamed to not conflict with
`SliceExt::split`.
* `Error` - there are a number of questions about its representation,
`ErrorKind`, and usability.
These items are now `#[deprecated]` in `old_io`
* `LimitReader` - use `take` instead
* `NullWriter` - use `io::sink` instead
* `ZeroReader` - use `io::repeat` instead
* `NullReader` - use `io::empty` instead
* `MultiWriter` - use `broadcast` instead
* `ChainedReader` - use `chain` instead
* `TeeReader` - use `tee` instead
* `copy` - use `io::copy` instead
[breaking-change]
This is an implementation of RFC 899 and adds stdio functionality to the new
`std::io` module. Details of the API can be found on the RFC, but from a high
level:
* `io::{stdin, stdout, stderr}` constructors are now available. There are also
`*_raw` variants for unbuffered and unlocked access.
* All handles are globally shared (excluding raw variants).
* The stderr handle is no longer buffered.
* All handles can be explicitly locked (excluding the raw variants).
The `print!` and `println!` machinery has not yet been hooked up to these
streams just yet. The `std::fmt::output` module has also not yet been
implemented as part of this commit.
* Adds features and allows
* Removes unused muts, unused imports, dead code
* Migrates some deprecated code to new io/env
* Changes std::num::uint/int to be re-exports of std::num::usize/isize
libcollections, liballoc, and libcoretest no longer warn during testing.
libstd warns much less, though there's some dangly bits that weren't obvious fixes. In particular, how to only supress deprecated warnings in specific submodules of std.
New functions, `slice::from_raw_parts` and `slice::from_raw_parts_mut`,
are added to implement the lifetime convention as agreed in rust-lang/rfcs#556.
The functions `slice::from_raw_buf` and `slice::from_raw_mut_buf` are
left deprecated for the time being.
Holding back on changing the signature of `std::ffi::c_str_to_bytes` as consensus in rust-lang/rfcs#592 is building to replace it with a composition of other functions.
Contribution to #21923.
This commit is an implementation of [RFC 576][rfc] which adds back the `std::io`
module to the standard library. No functionality in `std::old_io` has been
deprecated just yet, and the new `std::io` module is behind the same `io`
feature gate.
[rfc]: https://github.com/rust-lang/rfcs/pull/576
A good bit of functionality was copied over from `std::old_io`, but many tweaks
were required for the new method signatures. Behavior such as precisely when
buffered objects call to the underlying object may have been tweaked slightly in
the transition. All implementations were audited to use composition wherever
possible. For example the custom `pos` and `cap` cursors in `BufReader` were
removed in favor of just using `Cursor<Vec<u8>>`.
A few liberties were taken during this implementation which were not explicitly
spelled out in the RFC:
* The old `LineBufferedWriter` is now named `LineWriter`
* The internal representation of `Error` now favors OS error codes (a
0-allocation path) and contains a `Box` for extra semantic data.
* The io prelude currently reexports `Seek` as `NewSeek` to prevent conflicts
with the real prelude reexport of `old_io::Seek`
* The `chars` method was moved from `BufReadExt` to `ReadExt`.
* The `chars` iterator returns a custom error with a variant that explains that
the data was not valid UTF-8.
In preparation for the I/O rejuvination of the standard library, this commit
renames the current `io` module to `old_io` in order to make room for the new
I/O modules. It is expected that the I/O RFCs will land incrementally over time
instead of all at once, and this provides a fresh clean path for new modules to
enter into as well as guaranteeing that all old infrastructure will remain in
place for some time.
As each `old_io` module is replaced it will be deprecated in-place for new
structures in `std::{io, fs, net}` (as appropriate).
This commit does *not* leave a reexport of `old_io as io` as the deprecation
lint does not currently warn on this form of use. This is quite a large breaking
change for all imports in existing code, but all functionality is retained
precisely as-is and path statements simply need to be renamed from `io` to
`old_io`.
[breaking-change]
This commit is an implementation of [RFC 565][rfc] which is a stabilization of
the `std::fmt` module and the implementations of various formatting traits.
Specifically, the following changes were performed:
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0565-show-string-guidelines.md
* The `Show` trait is now deprecated, it was renamed to `Debug`
* The `String` trait is now deprecated, it was renamed to `Display`
* Many `Debug` and `Display` implementations were audited in accordance with the
RFC and audited implementations now have the `#[stable]` attribute
* Integers and floats no longer print a suffix
* Smart pointers no longer print details that they are a smart pointer
* Paths with `Debug` are now quoted and escape characters
* The `unwrap` methods on `Result` now require `Display` instead of `Debug`
* The `Error` trait no longer has a `detail` method and now requires that
`Display` must be implemented. With the loss of `String`, this has moved into
libcore.
* `impl<E: Error> FromError<E> for Box<Error>` now exists
* `derive(Show)` has been renamed to `derive(Debug)`. This is not currently
warned about due to warnings being emitted on stage1+
While backwards compatibility is attempted to be maintained with a blanket
implementation of `Display` for the old `String` trait (and the same for
`Show`/`Debug`) this is still a breaking change due to primitives no longer
implementing `String` as well as modifications such as `unwrap` and the `Error`
trait. Most code is fairly straightforward to update with a rename or tweaks of
method calls.
[breaking-change]
Closes#21436
As discussed with @aturon, this PR removes the `Send` bound from `std::error::Error`, allowing us to implement `Error` for error types containing non-`Send` types. Current examples include `PoisonError` and `TryLockError` from `std::sync` which contain a Guard that we don't want sent between tasks.
[breaking-change]
I searched for times when we were hiding functions with # in the documentation,
and fixed them to not use it unless neccesary.
I also made random improvements whenever I changed something. For example,
I changed Example to Examples, for consistency.
Fixes#13423
This gets rid of the 'experimental' level, removes the non-staged_api
case (i.e. stability levels for out-of-tree crates), and lets the
staged_api attributes use 'unstable' and 'deprecated' lints.
This makes the transition period to the full feature staging design
a bit nicer.
This commit takes a first pass at stabilizing `std::thread`:
* It removes the `detach` method in favor of two constructors -- `spawn`
for detached threads, `scoped` for "scoped" (i.e., must-join)
threads. This addresses some of the surprise/frustrating debug
sessions with the previous API, in which `spawn` produced a guard that
on destruction joined the thread (unless `detach` was called).
The reason to have the division in part is that `Send` will soon not
imply `'static`, which means that `scoped` thread creation can take a
closure over *shared stack data* of the parent thread. On the other
hand, this means that the parent must not pop the relevant stack
frames while the child thread is running. The `JoinGuard` is used to
prevent this from happening by joining on drop (if you have not
already explicitly `join`ed.) The APIs around `scoped` are
future-proofed for the `Send` changes by taking an additional lifetime
parameter. With the current definition of `Send`, this is forced to be
`'static`, but when `Send` changes these APIs will gain their full
flexibility immediately.
Threads that are `spawn`ed, on the other hand, are detached from the
start and do not yield an RAII guard.
The hope is that, by making `scoped` an explicit opt-in with a very
suggestive name, it will be drastically less likely to be caught by a
surprising deadlock due to an implicit join at the end of a scope.
* The module itself is marked stable.
* Existing methods other than `spawn` and `scoped` are marked stable.
The migration path is:
```rust
Thread::spawn(f).detached()
```
becomes
```rust
Thread::spawn(f)
```
while
```rust
let res = Thread::spawn(f);
res.join()
```
becomes
```rust
let res = Thread::scoped(f);
res.join()
```
[breaking-change]
fmt::Show is for debugging, and can and should be implemented for
all public types. This trait is used with `{:?}` syntax. There still
exists #[derive(Show)].
fmt::String is for types that faithfully be represented as a String.
Because of this, there is no way to derive fmt::String, all
implementations must be purposeful. It is used by the default format
syntax, `{}`.
This will break most instances of `{}`, since that now requires the type
to impl fmt::String. In most cases, replacing `{}` with `{:?}` is the
correct fix. Types that were being printed specifically for users should
receive a fmt::String implementation to fix this.
Part of #20013
[breaking-change]
This "reexports" all the functionality of `core::char::CharExt` as
methods on `unicode::u_char::UnicodeChar` (renamed to `CharExt`).
Imports may need to be updated (one now just imports
`unicode::CharExt`, or `std::char::CharExt` rather than two traits from
either), so this is a
[breaking-change]
This removes a large array of deprecated functionality, regardless of how
recently it was deprecated. The purpose of this commit is to clean out the
standard libraries and compiler for the upcoming alpha release.
Some notable compiler changes were to enable warnings for all now-deprecated
command line arguments (previously the deprecated versions were silently
accepted) as well as removing deriving(Zero) entirely (the trait was removed).
The distribution no longer contains the libtime or libregex_macros crates. Both
of these have been deprecated for some time and are available externally.
This commit is an implementation of [RFC 503][rfc] which is a stabilization
story for the prelude. Most of the RFC was directly applied, removing reexports.
Some reexports are kept around, however:
* `range` remains until range syntax has landed to reduce churn.
* `Path` and `GenericPath` remain until path reform lands. This is done to
prevent many imports of `GenericPath` which will soon be removed.
* All `io` traits remain until I/O reform lands so imports can be rewritten all
at once to `std::io::prelude::*`.
This is a breaking change because many prelude reexports have been removed, and
the RFC can be consulted for the exact list of removed reexports, as well as to
find the locations of where to import them.
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0503-prelude-stabilization.md
[breaking-change]
Closes#20068
This commit is an implementation of [RFC 526][rfc] which is a change to alter
the definition of the old `fmt::FormatWriter`. The new trait, renamed to
`Writer`, now only exposes one method `write_str` in order to guarantee that all
implementations of the formatting traits can only produce valid Unicode.
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0526-fmt-text-writer.md
One of the primary improvements of this patch is the performance of the
`.to_string()` method by avoiding an almost-always redundant UTF-8 check. This
is a breaking change due to the renaming of the trait as well as the loss of the
`write` method, but migration paths should be relatively easy:
* All usage of `write` should move to `write_str`. If truly binary data was
being written in an implementation of `Show`, then it will need to use a
different trait or an altogether different code path.
* All usage of `write!` should continue to work as-is with no modifications.
* All usage of `Show` where implementations just delegate to another should
continue to work as-is.
[breaking-change]
Closes#20352
* Both enums already derived `Copy`, but storing them in any
struct/container would prevent implementing `Clone` for said
struct/container even though they should be clonable.
* Also add PartialEq and Eq for good measure.
The first six commits are from an earlier PR (#19858) and have already been reviewed. This PR makes an awful hack in the compiler to accommodate slices both natively and in the index a range form. After a snapshot we can hopefully add the new Index impls and then we can remove these awful hacks.
r? @nikomatsakis (or anyone who knows the compiler, really)
This commit performs a second pass for stabilization over the `std::ptr` module.
The specific actions taken were:
* The `RawPtr` trait was renamed to `PtrExt`
* The `RawMutPtr` trait was renamed to `MutPtrExt`
* The module name `ptr` is now stable.
* These functions were all marked `#[stable]` with no modification:
* `null`
* `null_mut`
* `swap`
* `replace`
* `read`
* `write`
* `PtrExt::is_null`
* `PtrExt::offset`
* These functions remain unstable:
* `as_ref`, `as_mut` - the return value of an `Option` is not fully expressive
as null isn't the only bad value, and it's unclear
whether we want to commit to these functions at this
time. The reference/lifetime semantics as written are
also problematic in how they encourage arbitrary
lifetimes.
* `zero_memory` - This function is currently not used at all in the
distribution, and in general it plays a broader role in the
"working with unsafe pointers" story. This story is not yet
fully developed, so at this time the function remains
unstable for now.
* `read_and_zero` - This function remains unstable for largely the same
reasons as `zero_memory`.
* These functions are now all deprecated:
* `PtrExt::null` - call `ptr::null` or `ptr::null_mut` instead.
* `PtrExt::to_uint` - use an `as` expression instead.
* `PtrExt::is_not_null` - use `!p.is_null()` instead.
This commit is an implementation of [RFC 503][rfc] which is a stabilization
story for the prelude. Most of the RFC was directly applied, removing reexports.
Some reexports are kept around, however:
* `range` remains until range syntax has landed to reduce churn.
* `Path` and `GenericPath` remain until path reform lands. This is done to
prevent many imports of `GenericPath` which will soon be removed.
* All `io` traits remain until I/O reform lands so imports can be rewritten all
at once to `std::io::prelude::*`.
This is a breaking change because many prelude reexports have been removed, and
the RFC can be consulted for the exact list of removed reexports, as well as to
find the locations of where to import them.
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0503-prelude-stabilization.md
[breaking-change]
Closes#20068
* Both enums already derived `Copy`, but storing them in any
struct/container would prevent implementing `Clone` for said
struct/container even though they should be clonable.
* Also add PartialEq and Eq for good measure.
This commit is part of a series that introduces a `std::thread` API to
replace `std::task`.
In the new API, `spawn` returns a `JoinGuard`, which by default will
join the spawned thread when dropped. It can also be used to join
explicitly at any time, returning the thread's result. Alternatively,
the spawned thread can be explicitly detached (so no join takes place).
As part of this change, Rust processes now terminate when the main
thread exits, even if other detached threads are still running, moving
Rust closer to standard threading models. This new behavior may break code
that was relying on the previously implicit join-all.
In addition to the above, the new thread API also offers some built-in
support for building blocking abstractions in user space; see the module
doc for details.
Closes#18000
[breaking-change]
per rfc 459
cc https://github.com/rust-lang/rust/issues/19390
One question is: should we start by warning, and only switch to hard error later? I think we discussed something like this in the meeting.
r? @alexcrichton
This commit performs a second pass stabilization of the `std::default` module.
The module was already marked `#[stable]`, and the inheritance of `#[stable]`
was removed since this attribute was applied. This commit adds the `#[stable]`
attribute to the trait definition and one method name, along with all
implementations found in the standard distribution.
This commit collapses the various prelude traits for slices into just one trait:
* SlicePrelude/SliceAllocPrelude => SliceExt
* CloneSlicePrelude/CloneSliceAllocPrelude => CloneSliceExt
* OrdSlicePrelude/OrdSliceAllocPrelude => OrdSliceExt
* PartialEqSlicePrelude => PartialEqSliceExt
This change makes the compiler no longer infer whether types (structures
and enumerations) implement the `Copy` trait (and thus are implicitly
copyable). Rather, you must implement `Copy` yourself via `impl Copy for
MyType {}`.
A new warning has been added, `missing_copy_implementations`, to warn
you if a non-generic public type has been added that could have
implemented `Copy` but didn't.
For convenience, you may *temporarily* opt out of this behavior by using
`#![feature(opt_out_copy)]`. Note though that this feature gate will never be
accepted and will be removed by the time that 1.0 is released, so you should
transition your code away from using it.
This breaks code like:
#[deriving(Show)]
struct Point2D {
x: int,
y: int,
}
fn main() {
let mypoint = Point2D {
x: 1,
y: 1,
};
let otherpoint = mypoint;
println!("{}{}", mypoint, otherpoint);
}
Change this code to:
#[deriving(Show)]
struct Point2D {
x: int,
y: int,
}
impl Copy for Point2D {}
fn main() {
let mypoint = Point2D {
x: 1,
y: 1,
};
let otherpoint = mypoint;
println!("{}{}", mypoint, otherpoint);
}
This is the backwards-incompatible part of #13231.
Part of RFC #3.
[breaking-change]
Now that we have an overloaded comparison (`==`) operator, and that `Vec`/`String` deref to `[T]`/`str` on method calls, many `as_slice()`/`as_mut_slice()`/`to_string()` calls have become redundant. This patch removes them. These were the most common patterns:
- `assert_eq(test_output.as_slice(), "ground truth")` -> `assert_eq(test_output, "ground truth")`
- `assert_eq(test_output, "ground truth".to_string())` -> `assert_eq(test_output, "ground truth")`
- `vec.as_mut_slice().sort()` -> `vec.sort()`
- `vec.as_slice().slice(from, to)` -> `vec.slice(from_to)`
---
Note that e.g. `a_string.push_str(b_string.as_slice())` has been left untouched in this PR, since we first need to settle down whether we want to favor the `&*b_string` or the `b_string[]` notation.
This is rebased on top of #19167
cc @alexcrichton @aturon
In regards to:
https://github.com/rust-lang/rust/issues/19253#issuecomment-64836729
This commit:
* Changes the #deriving code so that it generates code that utilizes fewer
reexports (in particur Option::* and Result::*), which is necessary to
remove those reexports in the future
* Changes other areas of the codebase so that fewer reexports are utilized
io::stdin returns a new `BufferedReader` each time it's called, which
results in some very confusing behavior with disappearing output. It now
returns a `StdinReader`, which wraps a global singleton
`Arc<Mutex<BufferedReader<StdReader>>`. `Reader` is implemented directly
on `StdinReader`. However, `Buffer` is not, as the `fill_buf` method is
fundamentaly un-thread safe. A `lock` method is defined on `StdinReader`
which returns a smart pointer wrapping the underlying `BufferedReader`
while guaranteeing mutual exclusion.
Code that treats the return value of io::stdin as implementing `Buffer`
will break. Add a call to `lock`:
```rust
io::stdin().lines()
// =>
io::stdin().lock().lines()
```
Closes#14434
[breaking-change]
Implements RFC 438.
Fixes#19092.
This is a [breaking-change]: change types like `&Foo+Send` or `&'a mut Foo+'a` to `&(Foo+Send)` and `&'a mut (Foo+'a)`, respectively.
r? @brson
All of the enum components had a redundant 'Type' specifier: TypeSymlink, TypeDirectory, TypeFile. This change removes them, replacing them with a namespace: FileType::Symlink, FileType::Directory, and FileType::RegularFile.
RegularFile is used instead of just File, as File by itself could be mistakenly thought of as referring to the struct.
Part of #19253.
All of the enum components had a redundant 'Type' specifier: TypeSymlink, TypeDirectory, TypeFile. This change removes them, replacing them with a namespace: FileType::Symlink, FileType::Directory, and FileType::RegularFile.
RegularFile is used instead of just File, as File by itself could be mistakenly thought of as referring to the struct.
[breaking-change]
This commit applies the stabilization of std::fmt as outlined in [RFC 380][rfc].
There are a number of breaking changes as a part of this commit which will need
to be handled to migrated old code:
* A number of formatting traits have been removed: String, Bool, Char, Unsigned,
Signed, and Float. It is recommended to instead use Show wherever possible or
to use adaptor structs to implement other methods of formatting.
* The format specifier for Boolean has changed from `t` to `b`.
* The enum `FormatError` has been renamed to `Error` as well as becoming a unit
struct instead of an enum. The `WriteError` variant no longer exists.
* The `format_args_method!` macro has been removed with no replacement. Alter
code to use the `format_args!` macro instead.
* The public fields of a `Formatter` have become read-only with no replacement.
Use a new formatting string to alter the formatting flags in combination with
the `write!` macro. The fields can be accessed through accessor methods on the
`Formatter` structure.
Other than these breaking changes, the contents of std::fmt should now also all
contain stability markers. Most of them are still #[unstable] or #[experimental]
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0380-stabilize-std-fmt.md
[breaking-change]
Closes#18904
The trait has an obvious, sensible implementation directly on vectors so
the MemWriter wrapper is unnecessary. This will halt the trend towards
providing all of the vector methods on MemWriter along with eliminating
the noise caused by conversions between the two types. It also provides
the useful default Writer methods on Vec<u8>.
After the type is removed and code has been migrated, it would make
sense to add a new implementation of MemWriter with seeking support. The
simple use cases can be covered with vectors alone, and ones with the
need for seeks can use a new MemWriter implementation.
This breaks code that referred to variant names in the same namespace as
their enum. Reexport the variants in the old location or alter code to
refer to the new locations:
```
pub enum Foo {
A,
B
}
fn main() {
let a = A;
}
```
=>
```
pub use self::Foo::{A, B};
pub enum Foo {
A,
B
}
fn main() {
let a = A;
}
```
or
```
pub enum Foo {
A,
B
}
fn main() {
let a = Foo::A;
}
```
[breaking-change]
This moves chars() and lines() out of Buffer and into separate traits (CharsBuffer and LinesBuffer respectively) - this matches the pattern used for bytes() on Reader (with BytesReader).
(I came across this when I wanted a trait object of a Buffer, so that I could use read_line(); rustc errors about std::io::Buffer not being object-safe.)
[breaking-change]
Any uses of Buffer::lines() will need to use the new trait std::io::LinesBuffer.
The same is true for Buffer::chars() with std::io::CharsBuffer.
I found some occurrences of "failure" and "fails" in the documentation. I changed them to "panics" if it means a task panic. Otherwise I left it as is, or changed it to "errors" to clearly distinguish them.
Also, I made a minor fix that is breaking the layout of a module page. "Example" is shown in an irrelevant place from the following page: http://doc.rust-lang.org/std/os/index.html
Throughout the docs, "failure" was replaced with "panics" if it means a
task panic. Otherwise, it remained as is, or changed to "errors" to
clearly differentiate it from a task panic.
This patch cleans up the remnants of the runtime IO interface.
Because this eliminates APIs in `libnative` and `librustrt`, it is a:
[breaking-change]
This functionality is likely to be available publicly, in some form,
from `std` in the future.
This moves the filesystem implementation from libnative into the new
`sys` modules, refactoring along the way and hooking into `std::io::fs`.
Because this eliminates APIs in `libnative` and `librustrt`, it is a:
[breaking-change]
This functionality is likely to be available publicly, in some form,
from `std` in the future.
These modules will house the code that used to be part of the runtime system
in libnative. The `sys_common` module contains a few low-level but
cross-platform details. The `sys` module is set up using `#[cfg()]` to
include either a unix or windows implementation of a common API
surface. This API surface is *not* exported directly in `libstd`, but is
instead used to bulid `std::os` and `std::io`.
Ultimately, the low-level details in `sys` will be exposed in a
controlled way through a separate platform-specific surface, but that
setup is not part of this patch.
This commit renames a number of extension traits for slices and string
slices, now that they have been refactored for DST. In many cases,
multiple extension traits could now be consolidated. Further
consolidation will be possible with generalized where clauses.
The renamings are consistent with the [new `-Prelude`
suffix](https://github.com/rust-lang/rfcs/pull/344). There are probably
a few more candidates for being renamed this way, but that is left for
API stabilization of the relevant modules.
Because this renames traits, it is a:
[breaking-change]
However, I do not expect any code that currently uses the standard
library to actually break.
Closes#17917
As part of the collections reform RFC, this commit removes all collections
traits in favor of inherent methods on collections themselves. All methods
should continue to be available on all collections.
This is a breaking change with all of the collections traits being removed and
no longer being in the prelude. In order to update old code you should move the
trait implementations to inherent implementations directly on the type itself.
Note that some traits had default methods which will also need to be implemented
to maintain backwards compatibility.
[breaking-change]
cc #18424
https://github.com/rust-lang/rfcs/pull/221
The current terminology of "task failure" often causes problems when
writing or speaking about code. You often want to talk about the
possibility of an operation that returns a Result "failing", but cannot
because of the ambiguity with task failure. Instead, you have to speak
of "the failing case" or "when the operation does not succeed" or other
circumlocutions.
Likewise, we use a "Failure" header in rustdoc to describe when
operations may fail the task, but it would often be helpful to separate
out a section describing the "Err-producing" case.
We have been steadily moving away from task failure and toward Result as
an error-handling mechanism, so we should optimize our terminology
accordingly: Result-producing functions should be easy to describe.
To update your code, rename any call to `fail!` to `panic!` instead.
Assuming you have not created your own macro named `panic!`, this
will work on UNIX based systems:
grep -lZR 'fail!' . | xargs -0 -l sed -i -e 's/fail!/panic!/g'
You can of course also do this by hand.
[breaking-change]
compiletest: compact "linux" "macos" etc.as "unix".
liballoc: remove a superfluous "use".
libcollections: remove invocations of deprecated methods in favor of
their suggested replacements and use "_" for a loop counter.
libcoretest: remove invocations of deprecated methods; also add
"allow(deprecated)" for testing a deprecated method itself.
libglob: use "cfg_attr".
libgraphviz: add a test for one of data constructors.
libgreen: remove a superfluous "use".
libnum: "allow(type_overflow)" for type cast into u8 in a test code.
librustc: names of static variables should be in upper case.
libserialize: v[i] instead of get().
libstd/ascii: to_lowercase() instead of to_lower().
libstd/bitflags: modify AnotherSetOfFlags to use i8 as its backend.
It will serve better for testing various aspects of bitflags!.
libstd/collections: "allow(deprecated)" for testing a deprecated
method itself.
libstd/io: remove invocations of deprecated methods and superfluous "use".
Also add #[test] where it was missing.
libstd/num: introduce a helper function to effectively remove
invocations of a deprecated method.
libstd/path and rand: remove invocations of deprecated methods and
superfluous "use".
libstd/task and libsync/comm: "allow(deprecated)" for testing
a deprecated method itself.
libsync/deque: remove superfluous "unsafe".
libsync/mutex and once: names of static variables should be in upper case.
libterm: introduce a helper function to effectively remove
invocations of a deprecated method.
We still see a few warnings about using obsoleted native::task::spawn()
in the test modules for libsync. I'm not sure how I should replace them
with std::task::TaksBuilder and native::task::NativeTaskBuilder
(dependency to libstd?)
Signed-off-by: NODA, Kai <nodakai@gmail.com>
This commit repurposes most statics as constants in the standard library itself,
with the exception of TLS keys which precisely have their own memory location as
an implementation detail.
This commit also rewrites the bitflags syntax to use `const` instead of
`static`. All invocations will need to replace the word `static` with `const`
when declaring flags.
Due to the modification of the `bitflags!` syntax, this is a:
[breaking-change]
The `std::io::signal` API was only implemented under `librustuv`, which
is now being removed. Rather than keep around an unimplemented API, this
commit removes it altogether.
See the [runtime removal
RFC](https://github.com/rust-lang/rfcs/pull/230) for more context.
See [green-rs](https://github.com/alexcrichton/green-rs/) for a possible
migration path for signal handling code, although in the long run we
plan to add native signal handling to `std::io`.
[breaking-change]
This commit removes the `iotest!` macro from `std::io`. The macro was
primarily used to ensure that all io-related tests were run on both
libnative and libgreen/librustuv. However, now that the librustuv stack
is being removed, the macro is no longer needed.
See the [runtime removal
RFC](https://github.com/rust-lang/rfcs/pull/230) for more context.
[breaking-change]
over inherent methods accessible via more autoderefs.
This simplifies the trait matching algorithm. It breaks code like:
impl Foo {
fn foo(self) {
// before this change, this will be called
}
}
impl<'a,'b,'c> Trait for &'a &'b &'c Foo {
fn foo(self) {
// after this change, this will be called
}
}
fn main() {
let x = &(&(&Foo));
x.foo();
}
To explicitly indicate that you wish to call the inherent method, perform
explicit dereferences. For example:
fn main() {
let x = &(&(&Foo));
(***x).foo();
}
Part of #17282.
[breaking-change]
type they provide an implementation for.
This breaks code like:
mod foo {
struct Foo { ... }
}
impl foo::Foo {
...
}
Change this code to:
mod foo {
struct Foo { ... }
impl Foo {
...
}
}
Additionally, if you used the I/O path extension methods `stat`,
`lstat`, `exists`, `is_file`, or `is_dir`, note that these methods have
been moved to the the `std::io::fs::PathExtensions` trait. This breaks
code like:
fn is_it_there() -> bool {
Path::new("/foo/bar/baz").exists()
}
Change this code to:
use std::io::fs::PathExtensions;
fn is_it_there() -> bool {
Path::new("/foo/bar/baz").exists()
}
Closes#17059.
RFC #155.
[breaking-change]
- Both can now be inlined and constant folded away
- Both can no longer cause failure
- Both now return an `Option` instead
Removed debug `assert!()`s over the valid ranges of a `char`
- It affected optimizations due to unwinding
- Char handling is now sound enought that they became uneccessary
This required some contortions because importing both raw::Slice
and slice::Slice makes rustc crash.
Since `Slice` is in the prelude, this renaming is unlikely to
casue breakage.
[breaking-change]
ImmutableVector -> ImmutableSlice
ImmutableEqVector -> ImmutableEqSlice
ImmutableOrdVector -> ImmutableOrdSlice
MutableVector -> MutableSlice
MutableVectorAllocating -> MutableSliceAllocating
MutableCloneableVector -> MutableCloneableSlice
MutableOrdVector -> MutableOrdSlice
These are all in the prelude so most code will not break.
[breaking-change]
In order to prevent users from having to manually implement Hash and Ord for
bitflags types, this commit derives these traits automatically.
This breaks code that has manually implemented any of these traits for types
created by the bitflags! macro. Change this code by removing implementations
of these traits.
[breaking-change]
- `width()` computes the displayed width of a string, ignoring the width of control characters.
- arguably we might do *something* else for control characters, but the question is, what?
- users who want to do something else can iterate over chars()
- `graphemes()` returns a `Graphemes` struct, which implements an iterator over the grapheme clusters of a &str.
- fully compliant with [UAX#29](http://www.unicode.org/reports/tr29/#Grapheme_Cluster_Boundaries)
- passes all [Unicode-supplied tests](http://www.unicode.org/reports/tr41/tr41-15.html#Tests29)
- added code to generate additionial categories in `unicode.py`
- `Cn` aka `Not_Assigned`
- categories necessary for grapheme cluster breaking
- tidied up the exports from libunicode
- all exports are exposed through a module rather than directly at crate root.
- std::prelude imports UnicodeChar and UnicodeStrSlice from std::char and std::str rather than directly from libunicode
closes#7043
- Graphemes and GraphemeIndices structs implement iterators over
grapheme clusters analogous to the Chars and CharOffsets for chars in
a string. Iterator and DoubleEndedIterator are available for both.
- tidied up the exports for libunicode. crate root exports are now moved
into more appropriate module locations:
- UnicodeStrSlice, Words, Graphemes, GraphemeIndices are in str module
- UnicodeChar exported from char instead of crate root
- canonical_combining_class is exported from str rather than crate root
Since libunicode's exports have changed, programs that previously relied
on the old export locations will need to change their `use` statements
to reflect the new ones. See above for more information on where the new
exports live.
closes#7043
[breaking-change]
This PR is the outcome of the library stabilization meeting for the
`liballoc::owned` and `libcore::cell` modules.
Aside from the stability attributes, there are a few breaking changes:
* The `owned` modules is now named `boxed`, to better represent its
contents. (`box` was unavailable, since it's a keyword.) This will
help avoid the misconception that `Box` plays a special role wrt
ownership.
* The `AnyOwnExt` extension trait is renamed to `BoxAny`, and its `move`
method is renamed to `downcast`, in both cases to improve clarity.
* The recently-added `AnySendOwnExt` extension trait is removed; it was
not being used and is unnecessary.
[breaking-change]
Add libunicode; move unicode functions from core
- created new crate, libunicode, below libstd
- split `Char` trait into `Char` (libcore) and `UnicodeChar` (libunicode)
- Unicode-aware functions now live in libunicode
- `is_alphabetic`, `is_XID_start`, `is_XID_continue`, `is_lowercase`,
`is_uppercase`, `is_whitespace`, `is_alphanumeric`, `is_control`, `is_digit`,
`to_uppercase`, `to_lowercase`
- added `width` method in UnicodeChar trait
- determines printed width of character in columns, or None if it is a non-NULL control character
- takes a boolean argument indicating whether the present context is CJK or not (characters with 'A'mbiguous widths are double-wide in CJK contexts, single-wide otherwise)
- split `StrSlice` into `StrSlice` (libcore) and `UnicodeStrSlice` (libunicode)
- functionality formerly in `StrSlice` that relied upon Unicode functionality from `Char` is now in `UnicodeStrSlice`
- `words`, `is_whitespace`, `is_alphanumeric`, `trim`, `trim_left`, `trim_right`
- also moved `Words` type alias into libunicode because `words` method is in `UnicodeStrSlice`
- unified Unicode tables from libcollections, libcore, and libregex into libunicode
- updated `unicode.py` in `src/etc` to generate aforementioned tables
- generated new tables based on latest Unicode data
- added `UnicodeChar` and `UnicodeStrSlice` traits to prelude
- libunicode is now the collection point for the `std::char` module, combining the libunicode functionality with the `Char` functionality from libcore
- thus, moved doc comment for `char` from `core::char` to `unicode::char`
- libcollections remains the collection point for `std::str`
The Unicode-aware functions that previously lived in the `Char` and `StrSlice` traits are no longer available to programs that only use libcore. To regain use of these methods, include the libunicode crate and `use` the `UnicodeChar` and/or `UnicodeStrSlice` traits:
extern crate unicode;
use unicode::UnicodeChar;
use unicode::UnicodeStrSlice;
use unicode::Words; // if you want to use the words() method
NOTE: this does *not* impact programs that use libstd, since UnicodeChar and UnicodeStrSlice have been added to the prelude.
closes#15224
[breaking-change]
- created new crate, libunicode, below libstd
- split Char trait into Char (libcore) and UnicodeChar (libunicode)
- Unicode-aware functions now live in libunicode
- is_alphabetic, is_XID_start, is_XID_continue, is_lowercase,
is_uppercase, is_whitespace, is_alphanumeric, is_control,
is_digit, to_uppercase, to_lowercase
- added width method in UnicodeChar trait
- determines printed width of character in columns, or None if it is
a non-NULL control character
- takes a boolean argument indicating whether the present context is
CJK or not (characters with 'A'mbiguous widths are double-wide in
CJK contexts, single-wide otherwise)
- split StrSlice into StrSlice (libcore) and UnicodeStrSlice
(libunicode)
- functionality formerly in StrSlice that relied upon Unicode
functionality from Char is now in UnicodeStrSlice
- words, is_whitespace, is_alphanumeric, trim, trim_left, trim_right
- also moved Words type alias into libunicode because words method is
in UnicodeStrSlice
- unified Unicode tables from libcollections, libcore, and libregex into
libunicode
- updated unicode.py in src/etc to generate aforementioned tables
- generated new tables based on latest Unicode data
- added UnicodeChar and UnicodeStrSlice traits to prelude
- libunicode is now the collection point for the std::char module,
combining the libunicode functionality with the Char functionality
from libcore
- thus, moved doc comment for char from core::char to unicode::char
- libcollections remains the collection point for std::str
The Unicode-aware functions that previously lived in the Char and
StrSlice traits are no longer available to programs that only use
libcore. To regain use of these methods, include the libunicode crate
and use the UnicodeChar and/or UnicodeStrSlice traits:
extern crate unicode;
use unicode::UnicodeChar;
use unicode::UnicodeStrSlice;
use unicode::Words; // if you want to use the words() method
NOTE: this does *not* impact programs that use libstd, since UnicodeChar
and UnicodeStrSlice have been added to the prelude.
closes#15224
[breaking-change]
Earlier commits have established a baseline of `experimental` stability
for all crates under the facade (so their contents are considered
experimental within libstd). Since `experimental` is `allow` by
default, we should use the same baseline stability for libstd itself.
This commit adds `experimental` tags to all of the modules defined in
`std`, and `unstable` to `std` itself.
We use re-exported pathes (e.g. std::io::Command) and original ones
(e.g. std::io::process::Command) together in examples now. Using
re-exported ones consistently avoids confusion.
Signed-off-by: OGINO Masanori <masanori.ogino@gmail.com>
This allows llvm to optimize away much of the overhead from using
the MemReader/MemWriters. My benchmarks showed it to shave 15% off
of my in progress serialization/json encoding.
Replace its usage with byte string literals, except in `bytes!()` tests.
Also add a new snapshot, to be able to use the new b"foo" syntax.
The src/etc/2014-06-rewrite-bytes-macros.py script automatically
rewrites `bytes!()` invocations into byte string literals.
Pass it filenames as arguments to generate a diff that you can inspect,
or `--apply` followed by filenames to apply the changes in place.
Diffs can be piped into `tip` or `pygmentize -l diff` for coloring.
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
The span on a inner doc-comment would point to the next token, e.g. the span for the `a` line points to the `b` line, and the span of `b` points to the `fn`.
```rust
//! a
//! b
fn bar() {}
```
1. Wherever the `buf` field of a `Formatter` was used, the `Formatter` is used
instead.
2. The usage of `write_fmt` is minimized as much as possible, the `write!` macro
is preferred wherever possible.
3. Usage of `fmt::write` is minimized, favoring the `write!` macro instead.
This new method, write_fmt(), is the one way to write a formatted list of
arguments into a Writer stream. This has a special adaptor to preserve errors
which occur on the writer.
All macros will be updated to use this method explicitly.
The existing APIs for spawning processes took strings for the command
and arguments, but the underlying system may not impose utf8 encoding,
so this is overly limiting.
The assumption we actually want to make is just that the command and
arguments are viewable as [u8] slices with no interior NULLs, i.e., as
CStrings. The ToCStr trait is a handy bound for types that meet this
requirement (such as &str and Path).
However, since the commands and arguments are often a mixture of
strings and paths, it would be inconvenient to take a slice with a
single T: ToCStr bound. So this patch revamps the process creation API
to instead use a builder-style interface, called `Command`, allowing
arguments to be added one at a time with differing ToCStr
implementations for each.
The initial cut of the builder API has some drawbacks that can be
addressed once issue #13851 (libstd as a facade) is closed. These are
detailed as FIXMEs.
Closes#11650.
[breaking-change]
I feel that this is a very vital, missing piece of functionality. This adds on to #13072.
Only bits used in the definition of the bitflag are considered for the universe set. This is a bit safer than simply inverting all of the bits in the wrapped value.
```rust
bitflags!(flags Flags: u32 {
FlagA = 0x00000001,
FlagB = 0x00000010,
FlagC = 0x00000100,
FlagABC = FlagA.bits
| FlagB.bits
| FlagC.bits
})
...
// `Not` implements set complement
assert!(!(FlagB | FlagC) == FlagA);
// `all` and `is_all` are the inverses of `empty` and `is_empty`
assert!(Flags::all() - FlagA == !FlagA);
assert!(FlagABC.is_all());
```
Reader.read_at_least() ensures that at least a given number of bytes
have been read. The most common use-case for this is ensuring at least 1
byte has been read. If the reader returns 0 enough times in a row, a new
error kind NoProgress will be returned instead of looping infinitely.
This change is necessary in order to properly support Readers that
repeatedly return 0, either because they're broken, or because they're
attempting to do a non-blocking read on some resource that never becomes
available.
Also add .push() and .push_at_least() methods. push() is like read() but
the results are appended to the passed Vec.
Remove Reader.fill() and Reader.push_exact() as they end up being thin
wrappers around read_at_least() and push_at_least().
[breaking-change]
Been meaning to try my hand at something like this for a while, and noticed something similar mentioned as part of #13537. The suggestion on the original ticket is to use `TcpStream::open(&str)` to pass in a host + port string, but seems a little cleaner to pass in host and port separately -- so a signature like `TcpStream::open(&str, u16)`.
Also means we can use std::io::net::addrinfo directly instead of using e.g. liburl to parse the host+port pair from a string.
One outstanding issue in this PR that I'm not entirely sure how to address: in open_timeout, the timeout_ms will apply for every A record we find associated with a hostname -- probably not the intended behavior, but I didn't want to waste my time on elaborate alternatives until the general idea was a-OKed. :)
Anyway, perhaps there are other reasons for us to prefer the original proposed syntax, but thought I'd get some thoughts on this. Maybe there are some solid reasons to prefer using liburl to do this stuff.
Prior to this commit, TcpStream::connect and TcpListener::bind took a
single SocketAddr argument. This worked well enough, but the API felt a
little too "low level" for most simple use cases.
A great example is connecting to rust-lang.org on port 80. Rust users would
need to:
1. resolve the IP address of rust-lang.org using
io::net::addrinfo::get_host_addresses.
2. check for errors
3. if all went well, use the returned IP address and the port number
to construct a SocketAddr
4. pass this SocketAddr to TcpStream::connect.
I'm modifying the type signature of TcpStream::connect and
TcpListener::bind so that the API is a little easier to use.
TcpStream::connect now accepts two arguments: a string describing the
host/IP of the host we wish to connect to, and a u16 representing the
remote port number.
Similarly, TcpListener::bind has been modified to take two arguments:
a string describing the local interface address (e.g. "0.0.0.0" or
"127.0.0.1") and a u16 port number.
Here's how to port your Rust code to use the new TcpStream::connect API:
// old ::connect API
let addr = SocketAddr{ip: Ipv4Addr{127, 0, 0, 1}, port: 8080};
let stream = TcpStream::connect(addr).unwrap()
// new ::connect API (minimal change)
let addr = SocketAddr{ip: Ipv4Addr{127, 0, 0, 1}, port: 8080};
let stream = TcpStream::connect(addr.ip.to_str(), addr.port()).unwrap()
// new ::connect API (more compact)
let stream = TcpStream::connect("127.0.0.1", 8080).unwrap()
// new ::connect API (hostname)
let stream = TcpStream::connect("rust-lang.org", 80)
Similarly, for TcpListener::bind:
// old ::bind API
let addr = SocketAddr{ip: Ipv4Addr{0, 0, 0, 0}, port: 8080};
let mut acceptor = TcpListener::bind(addr).listen();
// new ::bind API (minimal change)
let addr = SocketAddr{ip: Ipv4Addr{0, 0, 0, 0}, port: 8080};
let mut acceptor = TcpListener::bind(addr.ip.to_str(), addr.port()).listen()
// new ::bind API (more compact)
let mut acceptor = TcpListener::bind("0.0.0.0", 8080).listen()
[breaking-change]
Closes#14163 (Fix typos in rustc manpage)
Closes#14161 (Add the patch number to version strings. Closes#13289)
Closes#14156 (rustdoc: Fix hiding implementations of traits)
Closes#14152 (add shebang to scripts that have execute bit set)
Closes#14150 (libcore: remove fails from slice.rs and remove duplicated length checking)
Closes#14147 (Make ProcessOutput Eq, TotalEq, Clone)
Closes#14142 (doc: updates rust manual (loop to continue))
Closes#14141 (doc: Update the linkage documentation)
Closes#14139 (Remove an unnecessary .move_iter().collect())
Closes#14136 (Two minor fixes in parser.rs)
Closes#14130 (Fixed typo in comments of driver.rs)
Closes#14128 (Add `stat` method to `std::io::fs::File` to stat without a Path.)
Closes#14114 (rustdoc: List macros in the sidebar)
Closes#14113 (shootout-nbody improvement)
Closes#14112 (Improved example code in Option)
Closes#14104 (Remove reference to MutexArc)
Closes#14087 (emacs: highlight `macro_name!` in macro invocations using [] delimiters)
The `FileStat` struct contained a `path` field, which was filled by the
`stat` and `lstat` function. Since this field isn't in fact returned by
the operating system (it was copied from the paths passed to the
functions) it was removed, as in the `fstat` case we aren't working with
a `Path`, but directly with a fd.
If your code used the `path` field of `FileStat` you will now have to
manually store the path passed to `stat` along with the returned struct.
[breaking-change]
This commit revisits the `cast` module in libcore and libstd, and scrutinizes
all functions inside of it. The result was to remove the `cast` module entirely,
folding all functionality into the `mem` module. Specifically, this is the fate
of each function in the `cast` module.
* transmute - This function was moved to `mem`, but it is now marked as
#[unstable]. This is due to planned changes to the `transmute`
function and how it can be invoked (see the #[unstable] comment).
For more information, see RFC 5 and #12898
* transmute_copy - This function was moved to `mem`, with clarification that is
is not an error to invoke it with T/U that are different
sizes, but rather that it is strongly discouraged. This
function is now #[stable]
* forget - This function was moved to `mem` and marked #[stable]
* bump_box_refcount - This function was removed due to the deprecation of
managed boxes as well as its questionable utility.
* transmute_mut - This function was previously deprecated, and removed as part
of this commit.
* transmute_mut_unsafe - This function doesn't serve much of a purpose when it
can be achieved with an `as` in safe code, so it was
removed.
* transmute_lifetime - This function was removed because it is likely a strong
indication that code is incorrect in the first place.
* transmute_mut_lifetime - This function was removed for the same reasons as
`transmute_lifetime`
* copy_lifetime - This function was moved to `mem`, but it is marked
`#[unstable]` now due to the likelihood of being removed in
the future if it is found to not be very useful.
* copy_mut_lifetime - This function was also moved to `mem`, but had the same
treatment as `copy_lifetime`.
* copy_lifetime_vec - This function was removed because it is not used today,
and its existence is not necessary with DST
(copy_lifetime will suffice).
In summary, the cast module was stripped down to these functions, and then the
functions were moved to the `mem` module.
transmute - #[unstable]
transmute_copy - #[stable]
forget - #[stable]
copy_lifetime - #[unstable]
copy_mut_lifetime - #[unstable]
[breaking-change]
This is the last remaining networkig object to implement timeouts for. This
takes advantage of the CancelIo function and the already existing asynchronous
I/O functionality of pipes.
These timeouts all follow the same pattern as established by the timeouts on
acceptors. There are three methods: set_timeout, set_read_timeout, and
set_write_timeout. Each of these sets a point in the future after which
operations will time out.
Timeouts with cloned objects are a little trickier. Each object is viewed as
having its own timeout, unaffected by other objects' timeouts. Additionally,
timeouts do not propagate when a stream is cloned or when a cloned stream has
its timeouts modified.
This commit is just the public interface which will be exposed for timeouts, the
implementation will come in later commits.
This moves as much allocation as possible from teh std::str module into
core::str. This includes essentially all non-allocating functionality, mostly
iterators and slicing and such.
This primarily splits the Str trait into only having the as_slice() method,
adding a new StrAllocating trait to std::str which contains the relevant new
allocation methods. This is a breaking change if any of the methods of "trait
Str" were overriden. The old functionality can be restored by implementing both
the Str and StrAllocating traits.
[breaking-change]
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
How to update your code:
* Instead of `~EXPR`, you should write `box EXPR`.
* Instead of `~TYPE`, you should write `Box<Type>`.
* Instead of `~PATTERN`, you should write `box PATTERN`.
[breaking-change]
This patch changes `std::io::FilePermissions` from an exposed `u32`
representation to a typesafe representation (that only allows valid
flag combinations) using the `std::bitflags`, thus ensuring a greater
degree of safety on the Rust side.
Despite the change to the type, most code should continue to work
as-is, sincde the new type provides bit operations in the style of C
flags. To get at the underlying integer representation, use the `bits`
method; to (unsafely) convert to `FilePermissions`, use
`FilePermissions::from_bits`.
Closes#6085.
[breaking-change]
This adds a `TcpStream::connect_timeout` function in order to assist opening
connections with a timeout (cc #13523). There isn't really much design space for
this specific operation (unlike timing out normal blocking reads/writes), so I
am fairly confident that this is the correct interface for this function.
The function is marked #[experimental] because it takes a u64 timeout argument,
and the u64 type is likely to change in the future.
This removes all resizability support for ~[T] vectors in preparation of DST.
The only growable vector remaining is Vec<T>. In summary, the following methods
from ~[T] and various functions were removed. Each method/function has an
equivalent on the Vec type in std::vec unless otherwise stated.
* slice::OwnedCloneableVector
* slice::OwnedEqVector
* slice::append
* slice::append_one
* slice::build (no replacement)
* slice::bytes::push_bytes
* slice::from_elem
* slice::from_fn
* slice::with_capacity
* ~[T].capacity()
* ~[T].clear()
* ~[T].dedup()
* ~[T].extend()
* ~[T].grow()
* ~[T].grow_fn()
* ~[T].grow_set()
* ~[T].insert()
* ~[T].pop()
* ~[T].push()
* ~[T].push_all()
* ~[T].push_all_move()
* ~[T].remove()
* ~[T].reserve()
* ~[T].reserve_additional()
* ~[T].reserve_exect()
* ~[T].retain()
* ~[T].set_len()
* ~[T].shift()
* ~[T].shrink_to_fit()
* ~[T].swap_remove()
* ~[T].truncate()
* ~[T].unshift()
* ~str.clear()
* ~str.set_len()
* ~str.truncate()
Note that no other API changes were made. Existing apis that took or returned
~[T] continue to do so.
[breaking-change]
Someone reading the docs won't know what the types of various things
are, so this adds them in a few meaningful places to help with
comprehension.
cc #13423.
move errno -> IoError converter into std, bubble up OSRng errors
Also adds a general errno -> `~str` converter to `std::os`, and makes the failure messages for the things using `OSRng` (e.g. (transitively) the task-local RNG, meaning hashmap initialisation failures aren't such a black box).
I've found a common use case being to fill a slice (not an owned vector)
completely with bytes. It's posible for short reads to happen, and if you're
trying to get an exact number of bytes then this helper will be useful.
These methods can be mistaken for general "read some bytes" utilities when
they're actually only meant for reading an exact number of bytes. By renaming
them it's much clearer about what they're doing without having to read the
documentation.
Closes#12892
This commit moves all logging out of the standard library into an external
crate. This crate is the new crate which is responsible for all logging macros
and logging implementation. A few reasons for this change are:
* The crate map has always been a bit of a code smell among rust programs. It
has difficulty being loaded on almost all platforms, and it's used almost
exclusively for logging and only logging. Removing the crate map is one of the
end goals of this movement.
* The compiler has a fair bit of special support for logging. It has the
__log_level() expression as well as generating a global word per module
specifying the log level. This is unfairly favoring the built-in logging
system, and is much better done purely in libraries instead of the compiler
itself.
* Initialization of logging is much easier to do if there is no reliance on a
magical crate map being available to set module log levels.
* If the logging library can be written outside of the standard library, there's
no reason that it shouldn't be. It's likely that we're not going to build the
highest quality logging library of all time, so third-party libraries should
be able to provide just as high-quality logging systems as the default one
provided in the rust distribution.
With a migration such as this, the change does not come for free. There are some
subtle changes in the behavior of liblog vs the previous logging macros:
* The core change of this migration is that there is no longer a physical
log-level per module. This concept is still emulated (it is quite useful), but
there is now only a global log level, not a local one. This global log level
is a reflection of the maximum of all log levels specified. The previously
generated logging code looked like:
if specified_level <= __module_log_level() {
println!(...)
}
The newly generated code looks like:
if specified_level <= ::log::LOG_LEVEL {
if ::log::module_enabled(module_path!()) {
println!(...)
}
}
Notably, the first layer of checking is still intended to be "super fast" in
that it's just a load of a global word and a compare. The second layer of
checking is executed to determine if the current module does indeed have
logging turned on.
This means that if any module has a debug log level turned on, all modules
with debug log levels get a little bit slower (they all do more expensive
dynamic checks to determine if they're turned on or not).
Semantically, this migration brings no change in this respect, but
runtime-wise, this will have a perf impact on some code.
* A `RUST_LOG=::help` directive will no longer print out a list of all modules
that can be logged. This is because the crate map will no longer specify the
log levels of all modules, so the list of modules is not known. Additionally,
warnings can no longer be provided if a malformed logging directive was
supplied.
The new "hello world" for logging looks like:
#[phase(syntax, link)]
extern crate log;
fn main() {
debug!("Hello, world!");
}
This commit shreds all remnants of libextra from the compiler and standard
distribution. Two modules, c_vec/tempfile, were moved into libstd after some
cleanup, and the other modules were moved to separate crates as seen fit.
Closes#8784Closes#12413Closes#12576
Most IO related functions return an IoResult so that the caller can handle failure in whatever way is appropriate. However, the `lines`, `bytes`, and `chars` iterators all supress errors. This means that code that needs to handle errors can't use any of these iterators. All three of these iterators were updated to produce IoResults.
Fixes#12368
Most IO related functions return an IoResult so that the caller can handle failure
in whatever way is appropriate. However, the `lines`, `bytes`, and `chars` iterators all
supress errors. This means that code that needs to handle errors can't use any of these
iterators. All three of these iterators were updated to produce IoResults.
Fixes#12368
Formatting via reflection has been a little questionable for some time now, and
it's a little unfortunate that one of the standard macros will silently use
reflection when you weren't expecting it. This adds small bits of code bloat to
libraries, as well as not always being necessary. In light of this information,
this commit switches assert_eq!() to using {} in the error message instead of
{:?}.
In updating existing code, there were a few error cases that I encountered:
* It's impossible to define Show for [T, ..N]. I think DST will alleviate this
because we can define Show for [T].
* A few types here and there just needed a #[deriving(Show)]
* Type parameters needed a Show bound, I often moved this to `assert!(a == b)`
* `Path` doesn't implement `Show`, so assert_eq!() cannot be used on two paths.
I don't think this is much of a regression though because {:?} on paths looks
awful (it's a byte array).
Concretely speaking, this shaved 10K off a 656K binary. Not a lot, but sometime
significant for smaller binaries.
This lowers the #[allow(missing_doc)] directive into some of the lower modules
which are less mature. Most I/O modules now require comprehensive documentation.
This commit removes deriving(ToStr) in favor of deriving(Show), migrating all impls of ToStr to fmt::Show.
Most of the details can be found in the first commit message.
Closes#12477
The std::run module is a relic from a standard library long since past, and
there's not much use to having two modules to execute processes with where one
is slightly more convenient. This commit merges the two modules, moving lots of
functionality from std::run into std::io::process and then deleting
std::run.
New things you can find in std::io::process are:
* Process::new() now only takes prog/args
* Process::configure() takes a ProcessConfig
* Process::status() is the same as run::process_status
* Process::output() is the same as run::process_output
* I/O for spawned tasks is now defaulted to captured in pipes instead of ignored
* Process::kill() was added (plus an associated green/native implementation)
* Process::wait_with_output() is the same as the old finish_with_output()
* destroy() is now signal_exit()
* force_destroy() is now signal_kill()
Closes#2625Closes#10016
The std::run module is a relic from a standard library long since past, and
there's not much use to having two modules to execute processes with where one
is slightly more convenient. This commit merges the two modules, moving lots of
functionality from std::run into std::io::process and then deleting
std::run.
New things you can find in std::io::process are:
* Process::new() now only takes prog/args
* Process::configure() takes a ProcessConfig
* Process::status() is the same as run::process_status
* Process::output() is the same as run::process_output
* I/O for spawned tasks is now defaulted to captured in pipes instead of ignored
* Process::kill() was added (plus an associated green/native implementation)
* Process::wait_with_output() is the same as the old finish_with_output()
* destroy() is now signal_exit()
* force_destroy() is now signal_kill()
Closes#2625Closes#10016
This commit changes the ToStr trait to:
impl<T: fmt::Show> ToStr for T {
fn to_str(&self) -> ~str { format!("{}", *self) }
}
The ToStr trait has been on the chopping block for quite awhile now, and this is
the final nail in its coffin. The trait and the corresponding method are not
being removed as part of this commit, but rather any implementations of the
`ToStr` trait are being forbidden because of the generic impl. The new way to
get the `to_str()` method to work is to implement `fmt::Show`.
Formatting into a `&mut Writer` (as `format!` does) is much more efficient than
`ToStr` when building up large strings. The `ToStr` trait forces many
intermediate allocations to be made while the `fmt::Show` trait allows
incremental buildup in the same heap allocated buffer. Additionally, the
`fmt::Show` trait is much more extensible in terms of interoperation with other
`Writer` instances and in more situations. By design the `ToStr` trait requires
at least one allocation whereas the `fmt::Show` trait does not require any
allocations.
Closes#8242Closes#9806
One of the most common ways to use the stdin stream is to read it line by line
for a small program. In order to facilitate this common usage pattern, this
commit changes the stdin() function to return a BufferedReader by default. A new
`stdin_raw()` method was added to get access to the raw unbuffered stream.
I have not changed the stdout or stderr methods because they are currently
unable to flush in their destructor, but #12403 should have just fixed that.
This is in preparation to remove the implementations of ToStrRadix in integers, and to remove the associated logic from `std::num::strconv`.
The parts that still need to be liberated are:
- `std::fmt::Formatter::runplural`
- `num::{bigint, complex, rational}`
This "bubble up an error" macro was originally named if_ok! in order to get it
landed, but after the fact it was discovered that this name is not exactly
desirable.
The name `if_ok!` isn't immediately clear that is has much to do with error
handling, and it doesn't look fantastic in all contexts (if if_ok!(...) {}). In
general, the agreed opinion about `if_ok!` is that is came in as subpar.
The name `try!` is more invocative of error handling, it's shorter by 2 letters,
and it looks fitting in almost all circumstances. One concern about the word
`try!` is that it's too invocative of exceptions, but the belief is that this
will be overcome with documentation and examples.
Close#12037
One of the most common ways to use the stdin stream is to read it line by line
for a small program. In order to facilitate this common usage pattern, this
commit changes the stdin() function to return a BufferedReader by default. A new
`stdin_raw()` method was added to get access to the raw unbuffered stream.
I have not changed the stdout or stderr methods because they are currently
unable to flush in their destructor, but #12403 should have just fixed that.
This adopts the rules posted in #10432:
1. If a seek position is negative, then an error is generated
2. Seeks beyond the end-of-file are allowed. Future writes will fill the gap
with data and future reads will return errors.
3. Seeks within the bounds of a file are fine.
Closes#10432
This adopts the rules posted in #10432:
1. If a seek position is negative, then an error is generated
2. Seeks beyond the end-of-file are allowed. Future writes will fill the gap
with data and future reads will return errors.
3. Seeks within the bounds of a file are fine.
Closes#10432
* All I/O now returns IoResult<T> = Result<T, IoError>
* All formatting traits now return fmt::Result = IoResult<()>
* The if_ok!() macro was added to libstd
These are either returned from public functions, and really should
appear in the documentation, but don't since they're private, or are
implementation details that are currently public.
These are either returned from public functions, and really should
appear in the documentation, but don't since they're private, or are
implementation details that are currently public.
* Reexport io::mem and io::buffered structs directly under io, make mem/buffered
private modules
* Remove with_mem_writer
* Remove DEFAULT_CAPACITY and use DEFAULT_BUF_SIZE (in io::buffered)
cc #11119
* Reexport io::mem and io::buffered structs directly under io, make mem/buffered
private modules
* Remove with_mem_writer
* Remove DEFAULT_CAPACITY and use DEFAULT_BUF_SIZE (in io::buffered)
The `print!` and `println!` macros are now the preferred method of printing, and so there is no reason to export the `stdio` functions in the prelude. The functions have also been replaced by their macro counterparts in the tutorial and other documentation so that newcomers don't get confused about what they should be using.
This is just an unnecessary trait that no one's ever going to parameterize over
and it's more useful to just define the methods directly on the types
themselves. The implementors of this type almost always don't want
inner_mut_ref() but they're forced to define it as well.
These methods are sorely needed on readers and writers, and I believe that the
encoding story should be solved with composition. This commit adds back the
missed functions when reading/writing strings onto generic Readers/Writers.
All tests except for the homing tests are now working again with the
librustuv/libgreen refactoring. The homing-related tests are currently commented
out and now placed in the rustuv::homing module.
I plan on refactoring scheduler pool spawning in order to enable more homing
tests in a future commit.
This commit introduces a new crate called "native" which will be the crate that
implements the 1:1 runtime of rust. This currently entails having an
implementation of std::rt::Runtime inside of libnative as well as moving all of
the native I/O implementations to libnative.
The current snag is that the start lang item must currently be defined in
libnative in order to start running, but this will change in the future.
Cool fact about this crate, there are no extra features that are enabled.
Note that this commit does not include any makefile support necessary for
building libnative, that's all coming in a later commit.
