Report coverage `0` of dead blocks
Fixes: #84018
With `-Z instrument-coverage`, coverage reporting of dead blocks
(for example, blocks dropped because a conditional branch is dropped,
based on const evaluation) is now supported.
If `instrument-coverage` is enabled, `simplify::remove_dead_blocks()`
finds all dropped coverage `Statement`s and adds their `code_region`s as
`Unreachable` coverage `Statement`s to the `START_BLOCK`, so they are
still included in the coverage map.
Check out the resulting changes in the test coverage reports in this PR (in [commit 1](0b0d293c7c)).
r? `@tmandry`
cc: `@wesleywiser`
RustyHermit ist is a library operating system. In this case, we link a static library as kernel to the application. The final result is a bootable application. The library and the application have to use the same target. Currently, the targets are different (see also https://github.com/rust-lang/rust/blob/master/compiler/rustc_target/src/spec/x86_64_unknown_hermit.rs). Consequently, this commit change the LLVM target to 'hermit'.
This kernel spec is needed to disable the usage of FPU registers, which are not allowed in kernel space. In contrast to Linux, everything is running in ring 0 and also in the same address space.
Signed-off-by: Stefan Lankes <slankes@eonerc.rwth-aachen.de>
CTFE inbounds-error-messages tweak
* use CheckInAllocMsg::PointerArithmeticTest for ptr_offset error
* nicer errors for some null pointer cases
r? `@oli-obk`
Coverage instruments closure bodies in macros (not the macro body)
Fixes: #84884
This solution might be considered a compromise, but I think it is the
better choice.
The results in the `closure.rs` test correctly resolve all test cases
broken as described in #84884.
One test pattern (in both `closure_macro.rs` and
`closure_macro_async.rs`) was also affected, and removes coverage
statistics for the lines inside the closure, because the closure
includes a macro. (The coverage remains at the callsite of the macro, so
we lose some detail, but there isn't a perfect choice with macros.
Often macro implementations are split across the macro and the callsite,
and there doesn't appear to be a single "right choice" for which body
should be covered. For the current implementation, we can't do both.
The callsite is most likely to be the preferred site for coverage.
r? `@tmandry`
cc: `@wesleywiser`
Removes unneeded check of `#[no_coverage]` in mapgen
There is an anticipated feature request to support a compiler flag that
only adds coverage for specific files (or perhaps mods). As I thought
about where that change would need to be supported, I realized that
checking the attribute in mapgen (for unused functions) was unnecessary.
The unused functions are only synthesized if they have MIR coverage, and
functions with the `no_coverage` attribute will not have been
instrumented with MIR coverage statements in the first place.
New tests confirm this.
Also, while adding tests, I updated resolved comments and FIXMEs in
other tests, and expanded comments and tests on one remaining issue that
is still not resolved.
r? `@tmandry`
cc: `@wesleywiser`
Rollup of 11 pull requests
Successful merges:
- #84409 (Ensure TLS destructors run before thread joins in SGX)
- #84500 (Add --run flag to compiletest)
- #84728 (Add test for suggestion to borrow unsized function parameters)
- #84734 (Add `needs-unwind` and beginning of support for testing `panic=abort` std to compiletest)
- #84755 (Allow using `core::` in intra-doc links within core itself)
- #84871 (Disallows `#![feature(no_coverage)]` on stable and beta (using standard crate-level gating))
- #84872 (Wire up tidy dependency checks for cg_clif)
- #84896 (Handle incorrect placement of parentheses in trait bounds more gracefully)
- #84905 (CTFE engine: rename copy → copy_intrinsic, move to intrinsics.rs)
- #84953 (Remove unneeded call to with_default_session_globals in rustdoc highlight)
- #84987 (small nits)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Under some conditions, the toolchain will produce a sequence of linker
arguments that result in a NEEDED list that puts libc before libgcc_s;
e.g.,
[0] NEEDED 0x2046ba libc.so.1
[1] NEEDED 0x204723 libm.so.2
[2] NEEDED 0x204736 libsocket.so.1
[3] NEEDED 0x20478b libumem.so.1
[4] NEEDED 0x204763 libgcc_s.so.1
Both libc and libgcc_s provide an unwinder implementation, but libgcc_s
provides some extra symbols upon which Rust directly depends. If libc
is first in the NEEDED list we will find some of those symbols in libc
but others in libgcc_s, resulting in undefined behaviour as the two
implementations do not use compatible interior data structures.
This solution is not perfect, but is the simplest way to produce correct
binaries on illumos for now.
CTFE engine: rename copy → copy_intrinsic, move to intrinsics.rs
The `copy` name is confusing for this function because we also have `copy_op` which is pretty different. I hope `copy_intrinsic` is clearer. Also `step.rs` should really just contain the main loop and opcode dispatch, so move this helper function to a more appropriate place.
r? ``````@oli-obk``````
Disallows `#![feature(no_coverage)]` on stable and beta (using standard crate-level gating)
Fixes: #84836
Removes the function-level feature gating solution originally implemented, and solves the same problem using `allow_internal_unstable`, so normal crate-level feature gating mechanism can still be used (which disallows the feature on stable and beta).
I tested this, building the compiler with and without `CFG_DISABLE_UNSTABLE_FEATURES=1`
With unstable features disabled, I get the expected result as shown here:
```shell
$ ./build/x86_64-unknown-linux-gnu/stage1/bin/rustc src/test/run-make-fulldeps/coverage/no_cov_crate.rs
error[E0554]: `#![feature]` may not be used on the dev release channel
--> src/test/run-make-fulldeps/coverage/no_cov_crate.rs:2:1
|
2 | #![feature(no_coverage)]
| ^^^^^^^^^^^^^^^^^^^^^^^^
error: aborting due to previous error
For more information about this error, try `rustc --explain E0554`.
```
r? ````@Mark-Simulacrum````
cc: ````@tmandry```` ````@wesleywiser````
And adds tests to validate it still works.
There is an anticipated feature request to support a compiler flag that
only adds coverage for specific files (or perhaps mods). As I thought
about where that change would need to be supported, I realized that
checking the attribute in mapgen (for unused functions) was unnecessary.
The unused functions are only synthesized if they have MIR coverage, and
functions with the `no_coverage` attribute will not have been
instrumented with MIR coverage statements in the first place.
New tests confirm this.
Also, while adding tests, I updated resolved comments and FIXMEs in
other tests.
Fixes: #84884
This solution might be considered a compromise, but I think it is the
better choice.
The results in the `closure.rs` test correctly resolve all test cases
broken as described in #84884.
One test pattern (in both `closure_macro.rs` and
`closure_macro_async.rs`) was also affected, and removes coverage
statistics for the lines inside the closure, because the closure
includes a macro. (The coverage remains at the callsite of the macro, so
we lose some detail, but there isn't a perfect choice with macros.
Often macro implementations are split across the macro and the callsite,
and there doesn't appear to be a single "right choice" for which body
should be covered. For the current implementation, we can't do both.
The callsite is most likely to be the preferred site for coverage.
I applied this fix to all `MacroKinds`, not just `Bang`.
I'm trying to resolve an issue of lost coverage in a
`MacroKind::Attr`-based, function-scoped macro. Instead of only
searching for a body_span that is "not a function-like macro" (that is,
MacroKind::Bang), I'm expanding this to all `MacroKind`s. Maybe I should
expand this to `ExpnKind::Desugaring` and `ExpnKind::AstPass` (or
subsets, depending on their sub-kinds) as well, but I'm not sure that's
a good idea.
I'd like to add a test of the `Attr` macro on functions, but I need time
to figure out how to constract a good, simple example without external
crate dependencies. For the moment, all tests still work as expected (no
change), this new commit shouldn't have a negative affect, and more
importantly, I believe it will have a positive effect. I will try to
confirm this.
Deduplicate ParamCandidates with the same value except for bound vars
Fixes#84398
This is kind of a hack. I wonder if we can get other types of candidates that are the same except for bound vars. This won't be a problem with Chalk, since we don't really need to know that there are two different "candidates" if they both give the same final substitution.
r? `@nikomatsakis`
Since the beginning of time the `-Ctarget-feature` flag on the command
line has largely been passed unmodified to LLVM. Afterwards, though, the
`#[target_feature]` attribute was stabilized and some of the names in
this attribute do not match the corresponding LLVM name. This is because
Rust doesn't always want to stabilize the exact feature name in LLVM for
the equivalent functionality in Rust. This creates a situation, however,
where in Rust you'd write:
#[target_feature(enable = "pclmulqdq")]
unsafe fn foo() {
// ...
}
but on the command line you would write:
RUSTFLAGS="-Ctarget-feature=+pclmul" cargo build --release
This difference is somewhat odd to deal with if you're a newcomer and
the situation may be made worse with upcoming features like [WebAssembly
SIMD](https://github.com/rust-lang/rust/issues/74372) which may be more
prevalent.
This commit implements a mapping to translate requests via
`-Ctarget-feature` through the same name-mapping functionality that's
present for attributes in Rust going to LLVM. This means that
`+pclmulqdq` will work on x86 targets where as previously it did not.
I've attempted to keep this backwards-compatible where the compiler will
just opportunistically attempt to remap features found in
`-Ctarget-feature`, but if there's something it doesn't understand it
gets passed unmodified to LLVM just as it was before.
lazify backtrace formatting for delayed diagnostics
Formatting backtraces causes debug info to be parsed, which is superfluous work if the delayed bugs get cleared later.
Lazifying them results in these speedups for the UI testsuite:
| | debuginfo = 0 | debuginfo = 1 | debuginfo = 2 |
|-------|---------------|---------------|---------------|
| eager | 31.59s | 37.55s | 42.64s |
| lazy | 30.44s | 30.86s | 34.07s |
Fix#84467 linker_args with --target=sparcv9-sun-solaris
Trying to cross-compile for sparcv9-sun-solaris
getting a error message for -zignore
Introduced when -z -ignore was seperated here
22d0ab0
No formatting done
Reproduce
``` bash
rustup target add sparcv9-sun-solaris
cargo new --bin hello && cd hello && cargo run --target=sparcv9-sun-solaris
```
config.toml
[target.sparcv9-sun-solaris]
linker = "gcc"
This commit implements both the native linking modifiers infrastructure
as well as an initial attempt at the individual modifiers from the RFC.
It also introduces a feature flag for the general syntax along with
individual feature flags for each modifier.
This defers backtrace formatting to the point where we
actually want to flush delayed diagnostics. If they are discarded
before that point then we can avoid invoking the backtrace formatting
machinery which will parse debug info and symbol tables.
for debuginfo=2 this leads to a 20% walltime reduction of the UI testsuite
Do not ICE on invalid const param
When encountering a path that can't have generics, do not call
`generics_of`. This would happen when writing something like
`path::this_is_a_mod<const_val>`.
Fix#84831.
Remove `rustc_middle::mir::interpret::CheckInAllocMsg::NullPointerTest`
Removing it per https://github.com/rust-lang/rust/pull/84842#discussion_r625589674: it's a dead enum variant.
Note that `PointerArithmeticTest` also seems dead:
```
$ rg -F PointerArithmeticTest -C5
compiler/rustc_middle/src/mir/interpret/error.rs
169-
170-/// Details of why a pointer had to be in-bounds.
171-#[derive(Debug, Copy, Clone, TyEncodable, TyDecodable, HashStable)]
172-pub enum CheckInAllocMsg {
173- MemoryAccessTest,
174: PointerArithmeticTest,
175- InboundsTest,
176-}
177-
178-impl fmt::Display for CheckInAllocMsg {
179- /// When this is printed as an error the context looks like this
--
182- write!(
183- f,
184- "{}",
185- match *self {
186- CheckInAllocMsg::MemoryAccessTest => "memory access",
187: CheckInAllocMsg::PointerArithmeticTest => "pointer arithmetic",
188- CheckInAllocMsg::InboundsTest => "inbounds test",
189- }
190- )
191- }
192-}
```
Not sure if that is also desirable to be removed, however.
using allow_internal_unstable (as recommended)
Fixes: #84836
```shell
$ ./build/x86_64-unknown-linux-gnu/stage1/bin/rustc src/test/run-make-fulldeps/coverage/no_cov_crate.rs
error[E0554]: `#![feature]` may not be used on the dev release channel
--> src/test/run-make-fulldeps/coverage/no_cov_crate.rs:2:1
|
2 | #![feature(no_coverage)]
| ^^^^^^^^^^^^^^^^^^^^^^^^
error: aborting due to previous error
For more information about this error, try `rustc --explain E0554`.
```
Deduplicate native libs before they are passed to the linker
Stop spamming the linker with the same native library over and over again, if they directly follow from each other. This would help prevent [this situation](https://github.com/MSxDOS/ntapi/issues/2).
Issue #38460 has been open since 2016 so I think it's worth making an incomplete fix that at least addresses the most common symptom and without otherwise changing how Rust handles native libs. This PR is intended to be easy to revert (if necessary) when a more permanent fix is implemented.
Retain data in vectorized registers for longer
This seems to be a mild performance improvement on the keccak crate at least, though not sure it'll show up more broadly.
When encountering a path that can't have generics, do not call
`generics_of`. This would happen when writing something like
`path::this_is_a_mod<const_val>`.
Fix#84831.
Update BARE_TRAIT_OBJECT and ELLIPSIS_INCLUSIVE_RANGE_PATTERNS to errors in Rust 2021
This addresses https://github.com/rust-lang/rust/pull/81244 by updating two lints to errors in the Rust 2021 edition.
r? `@estebank`
- It's used exactly once, so it's trivial to replace
- It doesn't match the normal convention for containers: normally
`get()` returns and option and indexing panics. Instead `get()` panicked
and there's no indexing operation available.
This extracts a new `parse_cfg` function that's used between both.
- Treat `#[doc(cfg(x), cfg(y))]` the same as `#[doc(cfg(x)]
#[doc(cfg(y))]`. Previously it would be completely ignored.
- Treat `#[doc(inline, cfg(x))]` the same as `#[doc(inline)]
#[doc(cfg(x))]`. Previously, the cfg would be ignored.
- Pass the cfg predicate through to rustc_expand to be validated
Co-authored-by: Vadim Petrochenkov <vadim.petrochenkov@gmail.com>
Replace 'NULL' with 'null'
This replaces occurrences of "NULL" with "null" in docs, comments, and compiler error/lint messages. This is for the sake of consistency, as the lowercase "null" is already the dominant form in Rust. The all-caps NULL looks like the C macro (or SQL keyword), which seems out of place in a Rust context, given that NULL does not exist in the Rust language or standard library (instead having [`ptr::null()`](https://doc.rust-lang.org/stable/std/ptr/fn.null.html)).
Fix debuginfo for generators
First, all fields except the discriminant (including `outer_fields`) should be put into structures inside the variant part, which gives an equivalent layout but offers us much better integration with debuggers.
Second, artificial flags in generator variants should be removed.
- Literally, variants are not artificial. We have `yield` statements, upvars and inner variables in the source code.
- Functionally, we don't want debuggers to suppress the variants. It contains the state of the generator, which is useful when debugging. So they shouldn't be marked artificial.
- Debuggers may use artificial flags to find the active variant. In this case, marking variants artificial will make debuggers not work properly.
Fixes#62572.
Fixes#79009.
And refer https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Debuginfo.20for.20generators.
Remove dead code in `rustc_session::Options`
- Don't recompile the same functions for each debugging option
This reduces the amount of items in the crate by quite a lot.
- Remove unused `parse_opt_list` and `parse_pathbuf_push` functions
- Remove unused macro parameters
- Remove `allow(dead_code)`.
Fixes: #84018
With `-Z instrument-coverage`, coverage reporting of dead blocks
(for example, blocks dropped because a conditional branch is dropped,
based on const evaluation) is now supported.
If `instrument-coverage` is enabled, `simplify::remove_dead_blocks()`
finds all dropped coverage `Statement`s and adds their `code_region`s as
`Unreachable` coverage `Statement`s to the `START_BLOCK`, so they are
still included in the coverage map.
Check out the resulting changes in the test coverage reports in this PR.
This ensures that `ParamEnv::and` preserves the original `caller_bounds`
when we have a value containing fresh tys/consts. This ensures that when
we cache a `SelectionCandidate`, the cache key (a `ParamEnvAnd`)
contains all of the information that influenced the computation of our
result (e.g. we may end up choosing a `ParamCandidate`)
Move HIR parenting information out of hir_owner
Split out of #82681.
The parent of a HIR node and its content are currently bundled together, but are rarely used together.
This PR separates both information in two distinct queries for HIR owners.
This reduces incremental invalidation for HIR items that appear within a function body when this body (and the local ids) changes.
Be stricter about rejecting LLVM reserved registers in asm!
LLVM will silently produce incorrect code if these registers are used as operands.
cc `@rust-lang/wg-inline-asm`
Rollup of 8 pull requests
Successful merges:
- #84601 (rustdoc: Only store locations in Cache::extern_locations and calculate the other info on-demand)
- #84704 (platform-support.md: Update for consistency with Target Tier Policy)
- #84724 (Replace llvm::sys::fs::F_None with llvm::sys::fs::OF_None)
- #84740 (Reset the docs' copy path button after 1 second)
- #84749 (Sync `rustc_codegen_cranelift`)
- #84756 (Add a ToC to the Target Tier Policy documentation)
- #84765 (Update cargo)
- #84774 (Fix misspelling)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Sync `rustc_codegen_cranelift`
Retrying #84746
r? ``@bjorn3``
---
Edit(bjorn3): Since the last sync there have been some refactorings around the driver code in preparation for a planned new feature. In addition ``@mominul`` implemented `-Ctarget-cpu` support and ``@XAMPPRocky`` fixed compilation of cg_clif itself for Windows with the MSVC toolchain.
Vastly improves coverage spans for macros
Fixes: #84561
This resolves problems where macros like `trace!(...)` would show zero coverage if tracing was disabled, and `assert_eq!(...)` would show zero coverage if the assertion did not fail, because only one coverage span was generated, for the branch.
This PR started with an idea that I could just drop branching blocks with same span as expanded macro. (See the fixed issue for more details.)
That did help, but it didn't resolve everything.
I also needed to add a span specifically for the macro name (plus `!`) to ensure the macro gets coverage even if it's internal expansion adds conditional branching blocks that are retained, and would otherwise drop the outer span. Now that outer span is _only_ the `(argument, list)`, which can safely be dropped now), because the macro name has its own span.
While testing, I also noticed the spanview debug output can cause an ICE on a function with no body. The
workaround for this is included in this PR (separate commit).
r? `@tmandry`
cc? `@wesleywiser`
Moved -z ignore to add_as_needed
Trying to cross-compile for sparcv9-sun-solaris
getting an error message for -zignore
Introduced when -z -ignore was separated here
22d0ab0
No formatting done
Reproduce
``` bash
rustup target add sparcv9-sun-solaris
cargo new --bin hello && cd hello && cargo run --target=sparcv9-sun-solaris
```
config.toml
[target.sparcv9-sun-solaris]
linker = "gcc"
Move iter_results to dyn FnMut rather than a generic
This means that we're no longer generating the iteration/locking code for each invocation site of iter_results, rather just once per query (roughly), which seems much better: this is a 15% win in instruction counts when compiling the rustc_query_impl crate. The code where this is used also is pretty cold, I suspect; the old solution didn't fully monomorphize either.
- Literally, variants are not artificial. We have `yield` statements,
upvars and inner variables in the source code.
- Functionally, we don't want debuggers to suppress the variants. It
contains the state of the generator, which is useful when debugging.
So they shouldn't be marked artificial.
- Debuggers may use artificial flags to find the active variant. In
this case, marking variants artificial will make debuggers not work
properly.
Fixes#79009.
All fields except the discriminant (including `outer_fields`)
should be put into structures inside the variant part, which gives
an equivalent layout but offers us much better integration with
debuggers.
Implement RFC 1260 with feature_name `imported_main`.
This is the second extraction part of #84062 plus additional adjustments.
This (mostly) implements RFC 1260.
However there's still one test case failure in the extern crate case. Maybe `LocalDefId` doesn't work here? I'm not sure.
cc https://github.com/rust-lang/rust/issues/28937
r? `@petrochenkov`
This means that we're no longer generating the iteration/locking code for each
invocation site of iter_results, rather just once per query.
This is a 15% win in instruction counts when compiling the rustc_query_impl crate.
Revert PR 77885 everywhere
Change to probe-stack=call (instead of inline-or-call) everywhere again, for now.
We had already reverted the change on stable back in PR #83412.
Since then, we've had some movement on issue #83139, but not a 100% fix.
But also since then, we had bug reported, issue #84667, that looks like outright codegen breakage, rather than problems confined to debuginfo issues. So we are reverting PR #77885 on stable and beta. We'll reland PR #77885 (or some variant) switching back to an LLVM-dependent selection of out-of-line call vs inline-asm, after these other issues have been resolved.
We had already reverted the change on stable back in PR #83412.
Since then, we've had some movement on issue #83139, but not a 100% fix.
But also since then, we had bug reported, issue #84667, that looks like outright
codegen breakage, rather than problems confined to debuginfo issues.
So we are reverting PR #77885 on stable and beta. We'll reland PR #77885 (or some
variant) switching back to an LLVM-dependent selection of out-of-line call vs
inline-asm, after these other issues have been resolved.
use correct feature flag for impl-block-level trait bounds on const fn
I am not sure what that special hack was needed for, but it doesn't seem needed any more...
This removes the last use of the `const_fn` feature flag -- Cc https://github.com/rust-lang/rust/issues/84510
r? `@oli-obk`
Add TRACKED_NO_CRATE_HASH and use it for `--remap-path-prefix`
I verified locally that this fixes https://github.com/rust-lang/rust/issues/66955.
r? `@Aaron1011` (feel free to reassign)
Rollup of 11 pull requests
Successful merges:
- #84484 (Don't rebuild rustdoc and clippy after checking bootstrap)
- #84530 (`test tidy` should ignore alternative `build` dir patterns)
- #84531 (Ignore commented out lines when finding features)
- #84540 (Build sanitizers for x86_64-unknown-linux-musl)
- #84555 (Set `backtrace-on-ice` by default for compiler and codegen profiles)
- #84585 (Add `x.py check src/librustdoc` as an alias for `x.py check src/tools/rustdoc`)
- #84636 (rustdoc: change aliases attribute to data-aliases)
- #84646 (Add some regression tests related to #82494)
- #84661 (Remove extra word in `rustc_mir` docs)
- #84663 (Remove `DropGuard` in `sys::windows::process` and use `StaticMutex` instead)
- #84668 (Update books)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
don't enable parking_lot nightly features
Having the compiler itself depend on external libraries that use nightly features can lead to "fun" bootstrap situations. Within the rustc repo we use `cfg(bootstrap)` to resolve those, but that is not a reasonable option for external dependencies.
So I propose we stop enabling the "nightly" feature of `parking_lot` here. In my experiments, this then indeed leads to the feature not being enabled (i.e., nothing else enables it), and everything still builds. However, this means parking_lot's `RwLock` will no longer have hardware lock elision for readers -- I hope that is okay to lose in exchange for less bootstrap brain twisting. ;)
Cc `@Amanieu`
Adds feature-gated `#[no_coverage]` function attribute, to fix derived Eq `0` coverage issue #83601
Derived Eq no longer shows uncovered
The Eq trait has a special hidden function. MIR `InstrumentCoverage`
would add this function to the coverage map, but it is never called, so
the `Eq` trait would always appear uncovered.
Fixes: #83601
The fix required creating a new function attribute `no_coverage` to mark
functions that should be ignored by `InstrumentCoverage` and the
coverage `mapgen` (during codegen).
Adding a `no_coverage` feature gate with tracking issue #84605.
r? `@tmandry`
cc: `@wesleywiser`
Improve coverage spans for chained function calls
Fixes: #84180
For chained function calls separated by the `?` try operator, the
function call following the try operator produced a MIR `Call` span that
matched the span of the first call. The `?` try operator started a new
span, so the second call got no span.
It turns out the MIR `Call` terminator has a `func` `Operand`
for the `Constant` representing the function name, and the function
name's Span can be used to reset the starting position of the span.
r? `@tmandry`
cc: `@wesleywiser`
Revert "Rollup merge of #82296 - spastorino:pubrules, r=nikomatsakis"
This reverts commit e2561c58a4, reversing
changes made to 2982ba50fc.
As discussed in #83641 this feature is not complete and in particular doesn't work cross macros and given that this is not going to be included in edition 2021 nobody seems to be trying to fix the underlying problem. When can add this again I guess, whenever somebody has the time to make it work cross crates.
r? `@nikomatsakis`
Update grab bag
This PR slides a bunch of crate versions forward until suddenly a bunch of deps fall out of the tree!
In doing so this mostly picks up a version bump in the `redox_users` crate which makes most of the features default to optional.
crossbeam-utils 0.7 => 0.8.3 (where applicable)
https://github.com/crossbeam-rs/crossbeam/blob/master/crossbeam-utils/CHANGELOG.md
directories 3.0.1 => 3.0.2
ignore 0.4.16 => 0.4.17
tempfile 3.0.5 => tempfile 3.2
Removes constant_time_eq from deps exceptions
Removes arrayref from deps exceptions
And also removes:
- blake2b_simd
- const_fn (the package, not the feature)
- constant_time_eq
- redox_users 0.3.4
- rust-argon2
The Eq trait has a special hidden function. MIR `InstrumentCoverage`
would add this function to the coverage map, but it is never called, so
the `Eq` trait would always appear uncovered.
Fixes: #83601
The fix required creating a new function attribute `no_coverage` to mark
functions that should be ignored by `InstrumentCoverage` and the
coverage `mapgen` (during codegen).
While testing, I also noticed two other issues:
* spanview debug file output ICEd on a function with no body. The
workaround for this is included in this PR.
* `assert_*!()` macro coverage can appear covered if followed by another
`assert_*!()` macro. Normally they appear uncovered. I submitted a new
Issue #84561, and added a coverage test to demonstrate this issue.
This is necessary for options that should invalidate the incremental
hash but *not* affect the crate hash (e.g. --remap-path-prefix).
This doesn't add `for_crate_hash` to the trait directly because it's not
relevant for *types*, only for *options*, which are fields on a larger
struct. Instead, it adds a new `SUBSTRUCT` directive for options, which
does take a `for_crate_hash` parameter.
- Use TRACKED_NO_CRATE_HASH for --remap-path-prefix
- Add test that `remap_path_prefix` is tracked
- Reduce duplication in the test suite to avoid future churn
Fix coverage ICE because fn_sig can have a span that crosses file bou…
Fixes: #83792
MIR `InstrumentCoverage` assumed the `FnSig` span was contained within a
single file, but this is not always the case. Some macro constructions
can result in a span that starts in one `SourceFile` and ends in a
different one.
The `FnSig` span is included in coverage results as long as that span is
in the same `SourceFile` and the same macro context, but by assuming the
`FnSig` span's `hi()` and `lo()` were in the same file, I took this for
granted, and checked only that the `FnSig` `hi()` was in the same
`SourceFile` as the `body_span`.
I actually drop the `hi()` though, and extend the `FnSig` span to the
`body_span.lo()`, so I really should have simply checked that the
`FnSig` span's `lo()` was in the `SourceFile` of the `body_span`.
r? `@tmandry`
cc: `@wesleywiser`
Fix typo in report_unsed_assign
The function was called `report_unsed_assign`, which I assume is a typo, considering the rest of the file.
This replaces `report_unsed_assign` with `report_unused_assign`.
Always reject `const fn` in `trait` during parsing.
'const fn' in trait are rejected in the AST:
b78c0d8a4d/compiler/rustc_ast_passes/src/ast_validation.rs (L1411)
So this feature gate check is a NOP and we can just remove it.
The src/test/ui/feature-gates/feature-gate-min_const_fn.rs and src/test/ui/feature-gates/feature-gate-const_fn.rs tests ensure that we still reject `const fn` in `trait`
Cc https://github.com/rust-lang/rust/issues/84510
r? `@oli-obk`
Get rid of is_min_const_fn
This removes the last trace of the min_const_fn mechanism by making the unsafety checker agnostic about whether something is a min or "non-min" const fn. It seems this distinction was used to disallow some features inside `const fn`, but that is the responsibility of the const checker, not of the unsafety checker. No test seems to even notice this change in the unsafety checker so I guess we are good...
r? `@oli-obk`
Cc https://github.com/rust-lang/rust/issues/84510
Improve diagnostics for function passed when a type was expected.
This PR improves diagnostics, it provides more information when a function is passed where a type is expected.
r? `@lcnr`
Handle pretty printing of `else if let` clauses without ICEing
When pretty printing the HIR of `if ... {} else if let ... {}` clauses, this displays it the `else if let` part as `match` it gets desugared to, the same way normal `if let` statements are currently displayed, instead of ICEing.
```rust
pub fn main() {
if true {
// 1
} else if let a = 1 {
// 2
} else {
// 3
}
}
```
now gets desugared (via `rustc -Zunpretty=hir,typed src/x.rs`) to:
```rust
#[prelude_import]
use ::std::prelude::rust_2015::*;
#[macro_use]
extern crate std;
pub fn main() ({
(if (true as bool)
({
// 1
} as
()) else {match (1 as i32) {
a => {
// 2
}
_ => {
// 3
}
}} as ())
} as ())
```
For comparison, this code gets HIR prettyprinted the same way before and after this change:
```rust
pub fn main() {
if let a = 1 {
// 2
} else {
// 3
}
}
```
turns into
```rust
#[prelude_import]
use ::std::prelude::rust_2015::*;
#[macro_use]
extern crate std;
pub fn main() ({
(match (1 as i32) {
a => {
// 2
}
_ => {
// 3
}
} as ())
} as ())
```
This closes#82329. It closes#84434 as well, due to having the same root cause.
Give a better error when `std` or `core` are missing
- Suggest using `rustup target add` if `RUSTUP_HOME` is set. I don't know if there's any precedent for doing this, but it seems harmless enough and it will be a big help.
- On nightly, suggest using `cargo build -Z build-std` if `CARGO` is set
- Add a note about `#![no_std]` if `std` is missing but not core
- Add a note that std may be unsupported if `std` is missing but not core
Fixes https://github.com/rust-lang/rust/issues/84418.
r? `@petrochenkov`
- Suggest using `rustup target add` if `RUSTUP_HOME` is set. I don't know if there's any precedent for doing this, but it seems harmless enough and it will be a big help.
- Add a note about `#![no_std]` if `std` is missing but not core
- On nightly, suggest using `cargo build -Z build-std` if `CARGO` is set
- Add a note that std may be unsupported if `std` is missing but not core
- Don't suggest `#![no_std]` when the load isn't injected by the
compiler
various const parameter defaults improvements
Actually resolve names in const parameter defaults, fixing `struct Foo<const N: usize = { usize::MAX }>`.
---
Split generic parameter ban rib for types and consts, allowing
```rust
#![feature(const_generics_defaults)]
struct Q;
struct Foo<T = Q, const Q: usize = 3>(T);
```
---
Remove the type/const ordering restriction if `const_generics_defaults` is active, even if `const_generics` is not. allowing us to stabilize and test const param defaults separately.
---
Check well formedness of const parameter defaults, eagerly emitting an error for `struct Foo<const N: usize = { 0 - 1 }>`
---
Do not forbid const parameters in param defaults, allowing `struct Foo<const N: usize, T = [u8; N]>(T)` and `struct Foo<const N: usize, const M: usize = N>`. Note that this should not change anything which is stabilized, as on stable, type parameters must be in front of const parameters, which means that type parameter defaults are only allowed if no const parameters exist.
We still forbid generic parameters inside of const param types.
r? `@varkor` `@petrochenkov`
move core::hint::black_box under its own feature gate
The `black_box` function had its own RFC and is tracked separately from the `test` feature at https://github.com/rust-lang/rust/issues/64102. Let's reflect this in the feature gate.
To avoid breaking all the benchmarks, libtest's `test::black_box` is a wrapping definition, not a reexport -- this means it is still under the `test` feature gate.
Cautiously add IntoIterator for arrays by value
Add the attribute described in #84133, `#[rustc_skip_array_during_method_dispatch]`, which effectively hides a trait from method dispatch when the receiver type is an array.
Then cherry-pick `IntoIterator for [T; N]` from #65819 and gate it with that attribute. Arrays can now be used as `IntoIterator` normally, but `array.into_iter()` has edition-dependent behavior, returning `slice::Iter` for 2015 and 2018 editions, or `array::IntoIter` for 2021 and later.
r? `@nikomatsakis`
cc `@LukasKalbertodt` `@rust-lang/libs`
Fixes: #84180
For chained function calls separated by the `?` try operator, the
function call following the try operator produced a MIR `Call` span that
matched the span of the first call. The `?` try operator started a new
span, so the second call got no span.
It turns out the MIR `Call` terminator has a `func` `Operand`
for the `Constant` representing the function name, and the function
name's Span can be used to reset the starting position of the span.
Static initializer can read other statics. Initializers are evaluated at
compile time, and so their content could become inlined into another
crate. Ensure that initializers of reachable statics are also reachable.
Previously, when an item incorrectly considered to be unreachable was
reached from another crate an attempt would be made to codegen it. The
attempt could fail with an ICE (in the case MIR wasn't available to do
so) in some circumstances the attempt could also succeed resulting in
a local codegen of non-local items, including static ones.
further split up const_fn feature flag
This continues the work on splitting up `const_fn` into separate feature flags:
* `const_fn_trait_bound` for `const fn` with trait bounds
* `const_fn_unsize` for unsizing coercions in `const fn` (looks like only `dyn` unsizing is still guarded here)
I don't know if there are even any things left that `const_fn` guards... at least libcore and liballoc do not need it any more.
`@oli-obk` are you currently able to do reviews?
Fixes: #83792
MIR `InstrumentCoverage` assumed the `FnSig` span was contained within a
single file, but this is not always the case. Some macro constructions
can result in a span that starts in one `SourceFile` and ends in a
different one.
The `FnSig` span is included in coverage results as long as that span is
in the same `SourceFile` and the same macro context, but by assuming the
`FnSig` span's `hi()` and `lo()` were in the same file, I took this for
granted, and checked only that the `FnSig` `hi()` was in the same
`SourceFile` as the `body_span`.
I actually drop the `hi()` though, and extend the `FnSig` span to the
`body_span.lo()`, so I really should have simply checked that the
`FnSig` span's `lo()` was in the `SourceFile` of the `body_span`.
Implement a lint that highlights all moves larger than a configured limit
Tracking issue: #83518
[MCP 420](https://github.com/rust-lang/compiler-team/issues/420) still ~blazing~ in progress
r? ```@pnkfelix```
The main open issue I see with this minimal impl of the feature is that the lint is immediately "stable" (so it can be named on stable), even if it is never executed on stable. I don't think we have the concept of unstable lint names or hiding lint names without an active feature gate, so that would be a bigger change.
Rollup of 10 pull requests
Successful merges:
- #83990 (implement `TrustedRandomAccess` for `Take` iterator adapter)
- #84250 (bootstrap: use bash on illumos to run install scripts)
- #84320 (Use details tag for trait implementors.)
- #84436 (Make a few functions private)
- #84453 (Document From implementations for Waker and RawWaker)
- #84458 (Remove unnecessary fields and parameters in rustdoc)
- #84485 (Add some associated type bounds tests)
- #84489 (Mention FusedIterator case in Iterator::fuse doc)
- #84492 (rustdoc: Remove unnecessary dummy span)
- #84496 (Add some specialization tests)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Make a few functions private
These were made public in 3105bcfdc1. This
is so long ago I doubt anyone remembers why they're public. No one outside rustc_session uses
them, including in-tree tools.
On stable, suggest removing `#![feature]` for features that have been stabilized
I don't know how to test this (https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/Run.20tests.20without.20enabling.20nightly.20features.3F). I confirmed locally that this gives the
appropriate help with `channel = "beta"`:
```
error[E0554]: `#![feature]` may not be used on the beta release channel
--> src/lib.rs:2:1
|
2 | #![feature(min_const_generics)]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: remove the attribute
|
= help: the feature `min_const_generics` has been stable since 1.51.0 and no longer requires an attribute to enable
error[E0554]: `#![feature]` may not be used on the beta release channel
--> src/lib.rs:3:1
|
3 | #![feature(min_const_generics, min_specialization)]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: the feature `min_const_generics` has been stable since 1.51.0 and no longer requires an attribute to enable
error[E0554]: `#![feature]` may not be used on the beta release channel
--> src/lib.rs:4:1
|
4 | #![feature(box_patterns)]
| ^^^^^^^^^^^^^^^^^^^^^^^^^
```
Closes https://github.com/rust-lang/rust/issues/83715.
Fix ICE if original_span(fn_sig) returns a span not in body sourcefile
Fixes: #84421
r? ````@tmandry````
fyi: ````@wesleywiser```` ````@sdroege```` ````@rajivshah3````
rustc: Use LLVM's new saturating float-to-int intrinsics
This commit updates rustc, with an applicable LLVM version, to use
LLVM's new `llvm.fpto{u,s}i.sat.*.*` intrinsics to implement saturating
floating-point-to-int conversions. This results in a little bit tighter
codegen for x86/x86_64, but the main purpose of this is to prepare for
upcoming changes to the WebAssembly backend in LLVM where wasm's
saturating float-to-int instructions will now be implemented with these
intrinsics.
This change allows simplifying a good deal of surrounding code, namely
removing a lot of wasm-specific behavior. WebAssembly no longer has any
special-casing of saturating arithmetic instructions and the need for
`fptoint_may_trap` is gone and all handling code for that is now
removed. This means that the only wasm-specific logic is in the
`fpto{s,u}i` instructions which only get used for "out of bounds is
undefined behavior". This does mean that for the WebAssembly target
specifically the Rust compiler will no longer be 100% compatible with
pre-LLVM 12 versions, but it seems like that's unlikely to be relied on
by too many folks.
Note that this change does immediately regress the codegen of saturating
float-to-int casts on WebAssembly due to the specialization of the LLVM
intrinsic not being present in our LLVM fork just yet. I'll be following
up with an LLVM update to pull in those patches, but affects a few other
SIMD things in flight for WebAssembly so I wanted to separate this change.
Eventually the entire `cast_float_to_int` function can be removed when
LLVM 12 is the minimum version, but that will require sinking the
complexity of it into other backends such as Cranelfit.
RustWrapper: work around unification of diagnostic handlers
This lets me build against llvm/main as of March 23rd, 2021. I'm not
entirely sure this is _correct_, but it appears to be functionally
identical to what was done in LLVM: existing callsites of
setInlineAsmDiagnosticHandler were moved to SetDiagnosticHandler() on
the context object, which we already set up in both places that we
called setInlineAsmDiagnosticHandler().
Use arrayvec 0.7, drop smallvec 0.6
With the arrival of min const generics, many alt-vec libraries have
updated to use it in some way and arrayvec is no exception. Use the
latest with minor refactoring.
Also, rustc_workspace_hack is the only user of smallvec 0.6 in the
entire tree, so drop it.
This lets me build against llvm/main as of March 23rd, 2021. I'm not
entirely sure this is _correct_, but it appears to be functionally
identical to what was done in LLVM: existing callsites of
setInlineAsmDiagnosticHandler were moved to SetDiagnosticHandler() on
the context object, which we already set up in both places that we
called setInlineAsmDiagnosticHandler().
Check for intrinsics before coercing to a function pointer
Return an error if coercing function items / non-capturing closures
to a common function pointer type would require reifying an intrinsic.
Turns ICE reported in #84297 into a proper error.
With the arrival of min const generics, many alt-vec libraries have
updated to use it in some way and arrayvec is no exception. Use the
latest with minor refactoring.
Also, rustc_workspace_hack is the only user of smallvec 0.6 in the
entire tree, so drop it.
Rollup of 12 pull requests
Successful merges:
- #84013 (Replace all `fmt.pad` with `debug_struct`)
- #84119 (Move `sys::vxworks` code to `sys::unix`)
- #84212 (Replace `Void` in `sys` with never type)
- #84251 (fix 'const-stable since' for NonZeroU*::new_unchecked)
- #84301 (Document that `index` and `index_mut` can panic)
- #84365 (Improve the docstrings of the `Lto` struct.)
- #84378 (Fix broken doc link)
- #84379 (Add GAT related tests)
- #84380 (Write Rustdoc titles like "x in crate::mod - Rust")
- #84390 (Format `Struct { .. }` on one line even with `{:#?}`.)
- #84393 (Support `x.py doc std --open`)
- #84406 (Remove `delete` alias from `mem::drop`.)
Failed merges:
- #84387 (Move `sys_common::poison` to `sync::poison`)
r? `@ghost`
`@rustbot` modify labels: rollup
