Introduce `let...else`
Tracking issue: #87335
The trickiest part for me was enforcing the diverging else block with clear diagnostics. Perhaps the obvious solution is to expand to `let _: ! = ..`, but I decided against this because, when a "mismatched type" error is found in typeck, there is no way to trace where in the HIR the expected type originated, AFAICT. In order to pass down this information, I believe we should introduce `Expectation::LetElseNever(HirId)` or maybe add `HirId` to `Expectation::HasType`, but I left that as a future enhancement. For now, I simply assert that the block is `!` with a custom `ObligationCauseCode`, and I think this is clear enough, at least to start. The downside here is that the error points at the entire block rather than the specific expression with the wrong type. I left a todo to this effect.
Overall, I believe this PR is feature-complete with regard to the RFC.
Clean up the lowering of AST items
This PR simplifies and improves `rustc_ast_lowering::item` in various minor ways. The reasons for the changes should mostly be self evident, though I'm happy to specifically explain anything if needed.
These changes used to be part of #88019, but I removed them after it was pointed out that some of my other changes to `rustc_ast_lowering` were unnecessary. It felt like a bad idea to clean up code which I didn't even need to touch anymore.
r? `@cjgillot`
Before:
help: consider adding semicolon after the expression so its temporaries are dropped sooner, before the local variables declared by the block are dropped
|
LL | for x in DroppingSlice(&*v).iter(); {
| +
After:
help: consider adding semicolon after the expression so its temporaries are dropped sooner, before the local variables declared by the block are dropped
|
LL | };
| +
This seems like a reasonable fix: since the desugared "expr_drop_temps_mut"
contains the entire desugared loop construct, its span should contain the
entire loop construct as well.
- [x] Removed `?const` and change uses of `?const`
- [x] Added `~const` to the AST. It is gated behind const_trait_impl.
- [x] Validate `~const` in ast_validation.
- [ ] Add enum `BoundConstness` to the HIR. (With variants `NotConst` and
`ConstIfConst` allowing future extensions)
- [ ] Adjust trait selection and pre-existing code to use `BoundConstness`.
- [ ] Optional steps (*for this PR, obviously*)
- [ ] Fix#88155
- [ ] Do something with constness bounds in chalk
Remove `Session.used_attrs` and move logic to `CheckAttrVisitor`
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
rfc3052 followup: Remove authors field from Cargo manifests
Since RFC 3052 soft deprecated the authors field, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information for contributors, we may as well
remove it from crates in this repo.
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
Store all HIR owners in the same container
This replaces the previous storage in a BTreeMap for each of Item/ImplItem/TraitItem/ForeignItem.
This should allow for a more compact storage.
Based on https://github.com/rust-lang/rust/pull/83114
Better diagnostics with mismatched types due to implicit static lifetime
Fixes#78113
I think this is my first diagnostics PR...definitely happy to hear thoughts on the direction/implementation here.
I was originally just trying to solve the error above, where the lifetime on a GAT was causing a cryptic "mismatched types" error. But as I was writing this, I realized that this (unintentionally) also applied to a different case: `wf-in-foreign-fn-decls-issue-80468.rs`. I'm not sure if this diagnostic should get a new error code, or even reuse an existing one. And, there might be some ways to make this even more generalized. Also, the error is a bit more lengthy and verbose than probably needed. So thoughts there are welcome too.
This PR essentially ended up adding a new nice region error pass that triggers if a type doesn't match the self type of an impl which is selected because of a predicate because of an implicit static bound on that self type.
r? `@estebank`
Add clobber-only register classes for asm!
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
Implement the new desugaring from `try_trait_v2`
~~Currently blocked on https://github.com/rust-lang/rust/issues/84782, which has a PR in https://github.com/rust-lang/rust/pull/84811~~ Rebased atop that fix.
`try_trait_v2` tracking issue: https://github.com/rust-lang/rust/issues/84277
Unfortunately this is already touching a ton of things, so if you have suggestions for good ways to split it up, I'd be happy to hear them. (The combination between the use in the library, the compiler changes, the corresponding diagnostic differences, even MIR tests mean that I don't really have a great plan for it other than trying to have decently-readable commits.
r? `@ghost`
~~(This probably shouldn't go in during the last week before the fork anyway.)~~ Fork happened.
Update BARE_TRAIT_OBJECT and ELLIPSIS_INCLUSIVE_RANGE_PATTERNS to errors in Rust 2021
This addresses https://github.com/rust-lang/rust/pull/81244 by updating two lints to errors in the Rust 2021 edition.
r? `@estebank`
This PR modifies the macro expansion infrastructure to handle attributes
in a fully token-based manner. As a result:
* Derives macros no longer lose spans when their input is modified
by eager cfg-expansion. This is accomplished by performing eager
cfg-expansion on the token stream that we pass to the derive
proc-macro
* Inner attributes now preserve spans in all cases, including when we
have multiple inner attributes in a row.
This is accomplished through the following changes:
* New structs `AttrAnnotatedTokenStream` and `AttrAnnotatedTokenTree` are introduced.
These are very similar to a normal `TokenTree`, but they also track
the position of attributes and attribute targets within the stream.
They are built when we collect tokens during parsing.
An `AttrAnnotatedTokenStream` is converted to a regular `TokenStream` when
we invoke a macro.
* Token capturing and `LazyTokenStream` are modified to work with
`AttrAnnotatedTokenStream`. A new `ReplaceRange` type is introduced, which
is created during the parsing of a nested AST node to make the 'outer'
AST node aware of the attributes and attribute target stored deeper in the token stream.
* When we need to perform eager cfg-expansion (either due to `#[derive]` or `#[cfg_eval]`),
we tokenize and reparse our target, capturing additional information about the locations of
`#[cfg]` and `#[cfg_attr]` attributes at any depth within the target.
This is a performance optimization, allowing us to perform less work
in the typical case where captured tokens never have eager cfg-expansion run.
forbid `impl Trait` in generic param defaults
Fixes#83929
Forbid using `impl Trait` in the default types of generic parameters, e.g. `struct Foo<T = impl Trait>`. I assume this was never supposed to be allowed - it seems no UI test used it.
Note that using `impl Trait` in this position did not hit a feature gate error; however, this *shouldn't* be a breaking change as any attempt to use it should have hit the ICE in #83929 and/or failed to provide a defining use of the `impl Trait`.
Use AnonConst for asm! constants
This replaces the old system which used explicit promotion. See #83169 for more background.
The syntax for `const` operands is still the same as before: `const <expr>`.
Fixes#83169
Because the implementation is heavily based on inline consts, we suffer from the same issues:
- We lose the ability to use expressions derived from generics. See the deleted tests in `src/test/ui/asm/const.rs`.
- We are hitting the same ICEs as inline consts, for example #78174. It is unlikely that we will be able to stabilize this before inline consts are stabilized.
GenericParam does not need to be a HIR owner.
The special case is not required.
Universal impl traits design to regular generic parameters, and their content is owned by the enclosing item.
Existential (and opaque) impl traits generate their own enclosing item, and are collected through it.
This currently creates a field which is always false on GenericParamDefKind for future use when
consts are permitted to have defaults
Update const_generics:default locations
Previously just ignored them, now actually do something about them.
Fix using type check instead of value
Add parsing
This adds all the necessary changes to lower const-generics defaults from parsing.
Change P<Expr> to AnonConst
This matches the arguments passed to instantiations of const generics, and makes it specific to
just anonymous constants.
Attempt to fix lowering bugs
