A bunch of cleanups
These are all extracted from a branch I have to get rid of driver queries. Most of the commits are not directly necessary for this, but were found in the process of implementing the removal of driver queries.
Previous PR: https://github.com/rust-lang/rust/pull/132410
It was inconsistently done (sometimes even within a single function) and
most of the rest of the compiler uses fatal errors instead, which need
to be caught using catch_with_exit_code anyway. Using fatal errors
instead of ErrorGuaranteed everywhere in the driver simplifies things a
bit.
rust_for_linux: -Zreg-struct-return commandline flag for X86 (#116973)
Command line flag `-Zreg-struct-return` for X86 (32-bit) for rust-for-linux.
This flag enables the same behavior as the `abi_return_struct_as_int` target spec key.
- Tracking issue: https://github.com/rust-lang/rust/issues/116973
Remove `-Zshow-span`.
It's very old (added in #12087). It's strange, and it's not clear what its use cases are. It only works with the crate root file because it runs before expansion. I suspect it won't be missed.
r? `@estebank`
It's very old (added in #12087). It's strange, and it's not clear what
its use cases are. It only works with the crate root file because it
runs before expansion. I suspect it won't be missed.
Get rid of HIR const checker
As far as I can tell, the HIR const checker was implemented in https://github.com/rust-lang/rust/pull/66170 because we were not able to issue useful const error messages in the MIR const checker.
This seems to have changed in the last 5 years, probably due to work like #90532. I've tweaked the diagnostics slightly and think the error messages have gotten *better* in fact.
Thus I think the HIR const checker has reached the end of its usefulness, and we can retire it.
cc `@RalfJung`
I was surprised to find that running with `-Zparse-only` only parses the
crate root file. Other files aren't parsed because that happens later
during expansion.
This commit renames the option and updates the help message to make this
clearer.
Some more refactorings towards removing driver queries
Follow up to https://github.com/rust-lang/rust/pull/127184
## Custom driver breaking change
The `after_analysis` callback is changed to accept `TyCtxt` instead of `Queries`. The only safe query in `Queries` to call at this point is `global_ctxt()` which allows you to enter the `TyCtxt` either way. To fix your custom driver, replace the `queries: &'tcx Queries<'tcx>` argument with `tcx: TyCtxt<'tcx>` and remove your `queries.global_ctxt().unwrap().enter(|tcx| { ... })` call and only keep the contents of the closure.
## Custom driver deprecation
The `after_crate_root_parsing` callback is now deprecated. Several custom drivers are incorrectly calling `queries.global_ctxt()` from inside of it, which causes some driver code to be skipped. As such I would like to either remove it in the future or if custom drivers still need it, change it to accept an `&rustc_ast::Crate` instead.
Merge `-Zhir-stats` into `-Zinput-stats`
Currently `-Z hir-stats` prints the size and count of various kinds of nodes, and the total size of all the nodes it counted, but not the total count of nodes. So, before this PR:
```
$ git clone https://github.com/BurntSushi/ripgrep
$ cd ripgrep
$ cargo +nightly rustc -- -Z hir-stats
ast-stats-1 PRE EXPANSION AST STATS
ast-stats-1 Name Accumulated Size Count Item Size
ast-stats-1 ----------------------------------------------------------------
ast-stats-1 ...
ast-stats-1 ----------------------------------------------------------------
ast-stats-1 Total 93_576
ast-stats-1
ast-stats-2 POST EXPANSION AST STATS
ast-stats-2 Name Accumulated Size Count Item Size
ast-stats-2 ----------------------------------------------------------------
ast-stats-2 ...
ast-stats-2 ----------------------------------------------------------------
ast-stats-2 Total 2_430_648
ast-stats-2
hir-stats HIR STATS
hir-stats Name Accumulated Size Count Item Size
hir-stats ----------------------------------------------------------------
hir-stats ...
hir-stats ----------------------------------------------------------------
hir-stats Total 3_678_512
hir-stats
```
For consistency, this PR adds a total for the count as well:
```
$ cargo +stage1 rustc -- -Z hir-stats
ast-stats-1 PRE EXPANSION AST STATS
ast-stats-1 Name Accumulated Size Count Item Size
ast-stats-1 ----------------------------------------------------------------
ast-stats-1 ...
ast-stats-1 ----------------------------------------------------------------
ast-stats-1 Total 93_576 1_877
ast-stats-1
ast-stats-2 POST EXPANSION AST STATS
ast-stats-2 Name Accumulated Size Count Item Size
ast-stats-2 ----------------------------------------------------------------
ast-stats-2 ...
ast-stats-2 ----------------------------------------------------------------
ast-stats-2 Total 2_430_648 48_625
ast-stats-2
hir-stats HIR STATS
hir-stats Name Accumulated Size Count Item Size
hir-stats ----------------------------------------------------------------
hir-stats ...
hir-stats ----------------------------------------------------------------
hir-stats Total 3_678_512 73_418
hir-stats
```
I wasn't sure if I was supposed to update `tests/ui/stats/hir-stats.stderr` to reflect this. I ran it locally, thinking it would fail, but it didn't:
```
$ ./x test tests/ui/stats
...
running 2 tests
i.
test result: ok. 1 passed; 0 failed; 1 ignored; 0 measured; 17949 filtered out
```
Also: is there a reason `-Z hir-stats` and `-Z input-stats` both exist? The former seems like it should completely supercede the latter. But strangely, the two give very different numbers for node counts:
```
$ cargo +nightly rustc -- -Z input-stats
...
Lines of code: 483
Pre-expansion node count: 2386
Post-expansion node count: 63844
```
That's a 30% difference in this case. Is it intentional that these numbers are so different? I see comments for both saying that they are merely approximations and should not be expected to be correct:
bd0826a452/compiler/rustc_ast_passes/src/node_count.rs (L1)bd0826a452/compiler/rustc_passes/src/hir_stats.rs (L1-L3)
Over in Zed we've noticed that loading crates for a large-ish workspace can take almost 200ms. We've pinned it down to how rustc searches for paths, as it performs a linear search over the list of candidate paths. In our case the candidate list had about 20k entries which we had to iterate over for each dependency being loaded.
This commit introduces a simple FilesIndex that's just a sorted Vec under the hood. Since crates are looked up by both prefix and suffix, we perform a range search on said Vec (which constraints the search space based on prefix) and follow up with a linear scan of entries with matching suffixes.
FilesIndex is also pre-filtered before any queries are performed using available target information; query prefixes/sufixes are based on the target we are compiling for, so we can remove entries that can never match up front.
Overall, this commit brings down build time for us in dev scenarios by about 6%.
100ms might not seem like much, but this is a constant cost that each of our workspace crates has to pay, even when said crate is miniscule.
Delete the `cfg(not(parallel))` serial compiler
Since it's inception a long time ago, the parallel compiler and its cfgs have been a maintenance burden. This was a necessary evil the allow iteration while not degrading performance because of synchronization overhead.
But this time is over. Thanks to the amazing work by the parallel working group (and the dyn sync crimes), the parallel compiler has now been fast enough to be shipped by default in nightly for quite a while now.
Stable and beta have still been on the serial compiler, because they can't use `-Zthreads` anyways.
But this is quite suboptimal:
- the maintenance burden still sucks
- we're not testing the serial compiler in nightly
Because of these reasons, it's time to end it. The serial compiler has served us well in the years since it was split from the parallel one, but it's over now.
Let the knight slay one head of the two-headed dragon!
#113349
Note that the default is still 1 thread, as more than 1 thread is still fairly broken.
cc `@onur-ozkan` to see if i did the bootstrap field removal correctly, `@SparrowLii` on the sync parts
Since it's inception a long time ago, the parallel compiler and its cfgs
have been a maintenance burden. This was a necessary evil the allow
iteration while not degrading performance because of synchronization
overhead.
But this time is over. Thanks to the amazing work by the parallel
working group (and the dyn sync crimes), the parallel compiler has now
been fast enough to be shipped by default in nightly for quite a while
now.
Stable and beta have still been on the serial compiler, because they
can't use `-Zthreads` anyways.
But this is quite suboptimal:
- the maintenance burden still sucks
- we're not testing the serial compiler in nightly
Because of these reasons, it's time to end it. The serial compiler has
served us well in the years since it was split from the parallel one,
but it's over now.
Let the knight slay one head of the two-headed dragon!
rustc_codegen_llvm: Add a new 'pc' option to branch-protection
Add a new 'pc' option to -Z branch-protection for aarch64 that enables the use of PC as a diversifier in PAC branch protection code.
When the pauth-lr target feature is enabled in combination with -Z branch-protection=pac-ret,pc, the new 9.5-a instructions (pacibsppc, retaasppc, etc) will be generated.
Add a new 'pc' option to -Z branch-protection for aarch64 that
enables the use of PC as a diversifier in PAC branch protection code.
When the pauth-lr target feature is enabled in combination
with -Z branch-protection=pac-ret,pc, the new 9.5-a instructions
(pacibsppc, retaasppc, etc) will be generated.
Reject leading unsafe in `cfg!(...)` and `--check-cfg`
This PR reject leading unsafe in `cfg!(...)` and `--check-cfg`.
Fixes (after-backport) https://github.com/rust-lang/rust/issues/131055
r? `@jieyouxu`
