Inline trivial (noop) flush calls
At work I noticed that `writer.flush()?` didn't get optimized away in cases where the flush is obviously a no-op, which I had expected (well, desired).
I went through and added `#[inline]` to a bunch of cases that were obviously noops, or delegated to ones that were obviously noops. I omitted platforms I don't have access to (some tier3). I didn't do this very scientifically, in cases where it was non-obvious I left `#[inline]` off.
Rollup of 6 pull requests
Successful merges:
- #113939 (open pidfd in child process and send to the parent via SOCK_SEQPACKET+CMSG)
- #114548 (Migrate a trait selection error to use diagnostic translation)
- #114606 (fix: not insert missing lifetime for `ConstParamTy`)
- #114634 (Mention riscv64-linux-android support in Android documentation)
- #114638 (Remove old RPITIT tests (revisions were removed))
- #114641 (Rename copying `ascii::Char` methods from `as_` to `to_`)
r? `@ghost`
`@rustbot` modify labels: rollup
open pidfd in child process and send to the parent via SOCK_SEQPACKET+CMSG
This avoids using `clone3` when a pidfd is requested while still getting it in a 100% race-free manner by passing it up from the child process.
This should solve most concerns in #82971
Make ExitStatus implement Default
And, necessarily, make it inhabited even on platforms without processes.
I noticed while preparing https://github.com/rust-lang/rfcs/pull/3362 that there was no way for anyone to construct an `ExitStatus`.
This would be insta-stable so needs an FCP.
This is for https://github.com/rust-lang/rust/issues/114341
The `meta.len() > 0` condition here is intended for inputs only,
ie. when input is in the `/proc` filesystem as documented.
That inaccurately included empty output files which are then shunted to
the sendfile() routine leading to higher than nescessary IO util in some
cases, specifically with CoW filesystems like btrfs.
Further, `NoneObtained` is not relevant in this context, so remove it.
Simply, determine what is input or output given the passed enum Unit.
Add `x86_64-unikraft-linux-musl` target
This introduces `x86_64-unikraft-linux-musl` as the first Rust target for the [Unikraft] Unikernel Development Kit.
[Unikraft]: https://unikraft.org/
Unikraft imitates Linux and uses musl as libc.
It is extremely configurable, and does not even provide a `poll` implementation or a network stack, unless enabled by the end user who compiles the application.
Our approach for integrating the build process with `rustc` is to hide the build process as well as the actual final linking step behind a linker-shim (`kraftld`, see https://github.com/unikraft/kraftkit/issues/612).
## Tier 3 target policy
> - A tier 3 target must have a designated developer or developers (the "target
> maintainers") on record to be CCed when issues arise regarding the target.
> (The mechanism to track and CC such developers may evolve over time.)
I will be the target maintainer.
> - Targets must use naming consistent with any existing targets; for instance, a
> target for the same CPU or OS as an existing Rust target should use the same
> name for that CPU or OS. Targets should normally use the same names and
> naming conventions as used elsewhere in the broader ecosystem beyond Rust
> (such as in other toolchains), unless they have a very good reason to
> diverge. Changing the name of a target can be highly disruptive, especially
> once the target reaches a higher tier, so getting the name right is important
> even for a tier 3 target.
> - Target names should not introduce undue confusion or ambiguity unless
> absolutely necessary to maintain ecosystem compatibility. For example, if
> the name of the target makes people extremely likely to form incorrect
> beliefs about what it targets, the name should be changed or augmented to
> disambiguate it.
> - If possible, use only letters, numbers, dashes and underscores for the name.
> Periods (`.`) are known to cause issues in Cargo.
The target name `x86_64-unikraft-linux-musl` was derived from `x86_64-unknown-linux-musl`, setting Unikraft as vendor.
Unikraft exactly imitates Linux + musl.
> - Tier 3 targets may have unusual requirements to build or use, but must not
> create legal issues or impose onerous legal terms for the Rust project or for
> Rust developers or users.
> - The target must not introduce license incompatibilities.
> - Anything added to the Rust repository must be under the standard Rust
> license (`MIT OR Apache-2.0`).
> - The target must not cause the Rust tools or libraries built for any other
> host (even when supporting cross-compilation to the target) to depend
> on any new dependency less permissive than the Rust licensing policy. This
> applies whether the dependency is a Rust crate that would require adding
> new license exceptions (as specified by the `tidy` tool in the
> rust-lang/rust repository), or whether the dependency is a native library
> or binary. In other words, the introduction of the target must not cause a
> user installing or running a version of Rust or the Rust tools to be
> subject to any new license requirements.
> - Compiling, linking, and emitting functional binaries, libraries, or other
> code for the target (whether hosted on the target itself or cross-compiling
> from another target) must not depend on proprietary (non-FOSS) libraries.
> Host tools built for the target itself may depend on the ordinary runtime
> libraries supplied by the platform and commonly used by other applications
> built for the target, but those libraries must not be required for code
> generation for the target; cross-compilation to the target must not require
> such libraries at all. For instance, `rustc` built for the target may
> depend on a common proprietary C runtime library or console output library,
> but must not depend on a proprietary code generation library or code
> optimization library. Rust's license permits such combinations, but the
> Rust project has no interest in maintaining such combinations within the
> scope of Rust itself, even at tier 3.
> - "onerous" here is an intentionally subjective term. At a minimum, "onerous"
> legal/licensing terms include but are *not* limited to: non-disclosure
> requirements, non-compete requirements, contributor license agreements
> (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms,
> requirements conditional on the employer or employment of any particular
> Rust developers, revocable terms, any requirements that create liability
> for the Rust project or its developers or users, or any requirements that
> adversely affect the livelihood or prospects of the Rust project or its
> developers or users.
No dependencies were added to Rust.
Requirements for linking are [Unikraft] and [KraftKit] (both BSD-3-Clause), but none of these are added to Rust.
[KraftKit]: https://github.com/unikraft/kraftkit
> - Neither this policy nor any decisions made regarding targets shall create any
> binding agreement or estoppel by any party. If any member of an approving
> Rust team serves as one of the maintainers of a target, or has any legal or
> employment requirement (explicit or implicit) that might affect their
> decisions regarding a target, they must recuse themselves from any approval
> decisions regarding the target's tier status, though they may otherwise
> participate in discussions.
> - This requirement does not prevent part or all of this policy from being
> cited in an explicit contract or work agreement (e.g. to implement or
> maintain support for a target). This requirement exists to ensure that a
> developer or team responsible for reviewing and approving a target does not
> face any legal threats or obligations that would prevent them from freely
> exercising their judgment in such approval, even if such judgment involves
> subjective matters or goes beyond the letter of these requirements.
Understood.
I am not a member of a Rust team.
> - Tier 3 targets should attempt to implement as much of the standard libraries
> as possible and appropriate (`core` for most targets, `alloc` for targets
> that can support dynamic memory allocation, `std` for targets with an
> operating system or equivalent layer of system-provided functionality), but
> may leave some code unimplemented (either unavailable or stubbed out as
> appropriate), whether because the target makes it impossible to implement or
> challenging to implement. The authors of pull requests are not obligated to
> avoid calling any portions of the standard library on the basis of a tier 3
> target not implementing those portions.
Understood.
`std` is supported.
> - The target must provide documentation for the Rust community explaining how
> to build for the target, using cross-compilation if possible. If the target
> supports running binaries, or running tests (even if they do not pass), the
> documentation must explain how to run such binaries or tests for the target,
> using emulation if possible or dedicated hardware if necessary.
Building is described in the platform support doc.
It will be updated once proper `kraftld` support has landed.
> - Tier 3 targets must not impose burden on the authors of pull requests, or
> other developers in the community, to maintain the target. In particular,
> do not post comments (automated or manual) on a PR that derail or suggest a
> block on the PR based on a tier 3 target. Do not send automated messages or
> notifications (via any medium, including via ``@`)` to a PR author or others
> involved with a PR regarding a tier 3 target, unless they have opted into
> such messages.
> - Backlinks such as those generated by the issue/PR tracker when linking to
> an issue or PR are not considered a violation of this policy, within
> reason. However, such messages (even on a separate repository) must not
> generate notifications to anyone involved with a PR who has not requested
> such notifications.
Understood.
> - Patches adding or updating tier 3 targets must not break any existing tier 2
> or tier 1 target, and must not knowingly break another tier 3 target without
> approval of either the compiler team or the maintainers of the other tier 3
> target.
> - In particular, this may come up when working on closely related targets,
> such as variations of the same architecture with different features. Avoid
> introducing unconditional uses of features that another variation of the
> target may not have; use conditional compilation or runtime detection, as
> appropriate, to let each target run code supported by that target.
I don't think this PR breaks anything.
r? compiler-team
Allow limited access to `OsString` bytes
This extends #109698 to allow no-cost conversion between `Vec<u8>` and `OsString` as suggested in feedback from `os_str_bytes` crate in #111544.
Revert the lexing of `c"…"` string literals
Fixes \[after beta-backport\] #113235.
Further progress is tracked in #113333.
This PR *manually* reverts parts of #108801 (since a git-revert would've been too coarse-grained & messy)
and git-reverts #111647.
CC `@fee1-dead` (#108801) `@klensy` (#111647)
r? `@compiler-errors`
`@rustbot` label F-c_str_literals beta-nominated
Move windows-sys arm32 shim to c.rs
This moves the arm32 shim in to c.rs instead of appending to the generated file itself.
This makes it simpler to change these workarounds if/when needed. The downside is we need to exclude a couple of functions from being generated (see the comment). A metadata solution could help here but they'll be easy enough to add back if that happens.
fix: get the l4re target working again
This is based on work from https://github.com/rust-lang/rust/pull/103966, addressing the review comment by `@m-ou-se` at the time and "fixing" the (probably newly) missing read_buf.
Implement `TryFrom<&OsStr>` for `&str`
Recently when trying to work with `&OsStr` I was surprised to find this `impl` missing.
Since the `to_str` method already existed the actual implementation is fairly non-controversial, except for maybe the choice of the error type. I chose an opaque error here instead of something like `std::str::Utf8Error`, since that would already make a number of assumption about the underlying implementation of `OsStr`.
As this is a trait implementation, it is insta-stable, if I'm not mistaken?
Either way this will need an FCP.
I chose "1.64.0" as the version, since this is unlikely to land before the beta cut-off.
`@rustbot` modify labels: +T-libs-api
API Change Proposal: rust-lang/rust#99031 (accepted)
Avoid unwind across `extern "C"` in `thread_local::fast_local`
This is a minimal fix for #112285, in case we want a simple patch that can be easily to backported if that's desirable.
*(Note: I have another broader cleanup which I've mostly omitted from here to avoid clutter, except for the `Cell` change, which isn't needed to fix UB, but simplifies safety comments).*
The only tier-1 target that this occurs on in a way that seems likely to cause problems in practice linux-gnu, although I believe some folks care about that platform somewhat 😉. I'm unsure how big of an issue this is. I've seen stuff like this behave quite badly, but there's a number of reasons to think this might actually be "fine in practice".
I've hedged my bets and assumed we'll backport this at least to beta but my feeling is that there's not enough evidence this is a problem worth backporting further than that.
### More details
This issue seems to have existed since `thread_local!`'s `const` init functionality was added. It occurs if you have a `const`-initialized thread local for a type that `needs_drop`, the drop panics, and you're on a target with support for static thread locals. In this case, we will end up defining an `extern "C"` function in the user crate rather than in libstd, and because the user crate will not have `#![feature(c_unwind)]` enabled, their panic will not be caught by an auto-inserted abort guard.
In practice, the actual situation where problems are likely[^ub] is somewhat narrower.
On most targets with static thread locals, we manage the TLS dtor list by hand (for reentrancy reasons among others). In these cases, while the users code may panic, we're calling it inside our own `extern "C"` (or `extern "system"`) function, which seems to (at least in practice) catch the panic and convert it to an abort.
However, on a few targets, most notably linux-gnu with recent glibc (but also fuchsia and redox), a tls dtor registration mechanism exists which we can actually use directly, [`__cxa_thread_atexit_impl`](https://github.com/rust-lang/rust/blob/master/library/std/src/sys/unix/thread_local_dtor.rs#L26-L36).
This is the case that seems most likely to be a cause for concern, as now we're passing a function to the system library and panicking out of it in a case where there are may not be Rust frames above it on the call stack (since it's running thread shutdown), and even if there were, it may not be prepared to handle such unwinding. If that's the case, it'd be bad.
Is it? Dunno. The fact that it's a `__cxa_*` function makes me think they probably have considered that the callback could throw but I have no evidence here and it doesn't seem to be written down anywhere, so it's just a guess. (I would not be surprised if someone comes into this thread to tell me how definitely-bad-news it is).
That said, as I said, all this is actually UB! If this isn't a "technically UB but fine in practice", but all bets are off if this is the kind of thing we are telling LLVM about.
[^ub]: This is UB so take that with a grain of salt -- I'm absolutely making assumptions about how the UB will behave "in practice" here, which is almost certainly a mistake.
QNX Neutrino: exponential backoff when fork/spawn needs a retry
Fixes#108594: When retrying, sleep with an exponential duration. When sleep duration is lower than minimum possible sleeping time, yield instead (this will not be often due to the exponential increase of duration).
Minimum possible sleeping time is determined using `libc::clock_getres` but only when spawn/fork failed the first time in a request. This is cached using a LazyLock.
CC `@gh-tr`
r? `@workingjubilee`
`@rustbot` label +O-neutrino
use c literals in compiler and library
Use c literals #108801 in compiler and library
currently blocked on:
* <strike>rustfmt: don't know how to format c literals</strike> nope, nightly one works.
* <strike>bootstrap</strike>
r? `@ghost`
`@rustbot` blocked
This fixes the behavior of sending EOF by pressing Ctrl+Z => Enter in a
windows console.
Previously, that would trip the unpaired surrogate error, whereas now we
correctly detect EOF.
Uplift `clippy::{drop,forget}_{ref,copy}` lints
This PR aims at uplifting the `clippy::drop_ref`, `clippy::drop_copy`, `clippy::forget_ref` and `clippy::forget_copy` lints.
Those lints are/were declared in the correctness category of clippy because they lint on useless and most probably is not what the developer wanted.
## `drop_ref` and `forget_ref`
The `drop_ref` and `forget_ref` lint checks for calls to `std::mem::drop` or `std::mem::forget` with a reference instead of an owned value.
### Example
```rust
let mut lock_guard = mutex.lock();
std::mem::drop(&lock_guard) // Should have been drop(lock_guard), mutex
// still locked
operation_that_requires_mutex_to_be_unlocked();
```
### Explanation
Calling `drop` or `forget` on a reference will only drop the reference itself, which is a no-op. It will not call the `drop` or `forget` method on the underlying referenced value, which is likely what was intended.
## `drop_copy` and `forget_copy`
The `drop_copy` and `forget_copy` lint checks for calls to `std::mem::forget` or `std::mem::drop` with a value that derives the Copy trait.
### Example
```rust
let x: i32 = 42; // i32 implements Copy
std::mem::forget(x) // A copy of x is passed to the function, leaving the
// original unaffected
```
### Explanation
Calling `std::mem::forget` [does nothing for types that implement Copy](https://doc.rust-lang.org/std/mem/fn.drop.html) since the value will be copied and moved into the function on invocation.
-----
Followed the instructions for uplift a clippy describe here: https://github.com/rust-lang/rust/pull/99696#pullrequestreview-1134072751
cc `@m-ou-se` (as T-libs-api leader because the uplifting was discussed in a recent meeting)
Start using `windows sys` for Windows FFI bindings in std
Switch to using windows-sys for FFI. In order to avoid some currently contentious issues, this uses windows-bindgen to generate a smaller set of bindings instead of using the full crate.
Unlike the windows-sys crate, the generated bindings uses `*mut c_void` for handle types instead of `isize`. This to sidestep opsem concerns about mixing pointer types and integers between languages. Note that `SOCKET` remains defined as an integer but instead of being a usize, it's changed to fit the [standard library definition](a41fc00eaf/library/std/src/os/windows/raw.rs (L12-L16)):
```rust
#[cfg(target_pointer_width = "32")]
pub type SOCKET = u32;
#[cfg(target_pointer_width = "64")]
pub type SOCKET = u64;
```
The generated bindings also customizes the `#[link]` imports. I hope to switch to using raw-dylib but I don't want to tie that too closely with the switch to windows-sys.
---
Changes outside of the bindings are, for the most part, fairly minimal (e.g. some differences in `*mut` vs. `*const` or a few types differ). One issue is that our own bindings sometimes mix in higher level types, like `BorrowedHandle`. This is pretty adhoc though.
Fix MXCSR configuration dependent timing
Dependent on the (potentially secret) data some vector instructions operate on, and the content in MXCSR, instruction retirement may be delayed by one cycle. This is a potential side channel.
This PR fixes this vulnerability for the `x86_64-fortanix-unknown-sgx` platform by loading MXCSR with `0x1fbf` through an `xrstor` instruction when the enclave is entered and executing an `lfence` immediately after. Other changes of the MXCSR happen only when the enclave is about to be exited and no vector instructions will be executed before it will actually do so. Users of EDP who change the MXCSR and do wish to defend against this side channel, will need to implement the software mitigation described [here](https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/best-practices/mxcsr-configuration-dependent-timing.html).
cc: `@jethrogb` `@monokles`
Add FreeBSD cpuset support to `std:🧵:available_concurrency`
Use libc::cpuset_getaffinity to determine the CPUs available to the current process.
The existing sysconf and sysctl paths are left as fallback.
Fix `checked_{add,sub}_duration` incorrectly returning `None` when `other` has more than `i64::MAX` seconds
Use `checked_{add,sub}_unsigned` in `checked_{add,sub}_duration` so that the correct result is returned when adding/subtracting durations with more than `i64::MAX` seconds.
avoid duplicating TLS state between test std and realstd
This basically re-lands https://github.com/rust-lang/rust/pull/100201 and https://github.com/rust-lang/rust/pull/106638, which got reverted by https://github.com/rust-lang/rust/pull/110861. This works around 2 Miri limitations:
- Miri doesn't support the magic linker section that our Windows TLS support relies on, and instead knows where in std to find the symbol that stores the thread callback.
- For macOS, Miri only supports at most one destructor to be registered per thread.
The 2nd would not be very hard to fix (though the intended destructor order is unclear); the first would be a lot of work to fix. Neither of these is a problem for regular Rust code, but in the std test suite we have essentially 2 copies of the std code and then these both become issues. To avoid that we have the std test crate import the TLS code from the real std instead of having its own copy.
r? ``````@m-ou-se``````
Replace generic thread parker with explicit no-op parker
With #98391 merged, all platforms supporting threads now have their own parking implementations. Therefore, the generic implementation can be removed. On the remaining platforms (really just WASM without atomics), parking is not supported, so calls to `thread::park` now return instantly, which is [allowed by their API](https://doc.rust-lang.org/nightly/std/thread/fn.park.html). This is a change in behaviour, as spurious wakeups do not currently occur since all platforms guard against them. It is invalid to depend on this, but I'm still going to tag this as libs-api for confirmation.
````@rustbot```` label +T-libs +T-libs-api +A-atomic
r? rust-lang/libs
Some data-independent timing vector instructions may have subtle data-dependent
timing due to MXCSR configuration; dependent on (potentially secret) data
instruction retirement may be delayed by one cycle.
This can be done by simply changing the `\??\` prefix to `\\?\` and then attempting to convert to a user path.
Currently it simply strips off the prefix which could lead to the wrong path being returned (e.g. if it's not a drive path or if the path contains trailing spaces, etc).
Remove `all` in target_thread_local cfg
I think it was left there by mistake after the previous refactoring. I just came across it while rebasing to master.
Make sure the implementation of TcpStream::as_raw_fd is fully inlined
Currently the following function:
```rust
use std::os::fd::{AsRawFd, RawFd};
use std::net::TcpStream;
pub fn as_raw_fd(socket: &TcpStream) -> RawFd {
socket.as_raw_fd()
}
```
Is optimized to the following:
```asm
example::as_raw_fd:
push rax
call qword ptr [rip + <std::net::tcp::TcpStream as std::sys_common::AsInner<std::sys_common::net::TcpStream>>::as_inner@GOTPCREL]
mov rdi, rax
call qword ptr [rip + std::sys_common::net::TcpStream::socket@GOTPCREL]
mov rdi, rax
pop rax
jmp qword ptr [rip + _ZN73_$LT$std..sys..unix..net..Socket$u20$as$u20$std..os..fd..raw..AsRawFd$GT$9as_raw_fd17h633bcf7e481df8bbE@GOTPCREL]
```
I think it would make more sense to inline trivial functions used within `TcpStream::AsRawFd`.
Add 64-bit `time_t` support on 32-bit glibc Linux to `set_times`
Add support to `set_times` for 64-bit `time_t` on 32-bit glibc Linux platforms which have a 32-bit `time_t`. Split from #109773.
Tracking issue: #98245
If opening a directory with `FILE_LIST_DIRECTORY` access fails then we should try opening without requesting that access. We may still be able to delete it if it's empty or a link.
Restructure and rename std thread_local internals to make it less of a maze
Every time I try to work on std's thread local internals, it feels like I'm trying to navigate a confusing maze made of macros, deeply nested modules, and types with multiple names/aliases. Time to clean it up a bit.
This PR:
- Exports `Key` with its own name (`Key`), instead of `__LocalKeyInner`
- Uses `pub macro` to put `__thread_local_inner` into a (unstable, hidden) module, removing `#[macro_export]`, removing it from the crate root.
- Removes the `__` from `__thread_local_inner`.
- Removes a few unnecessary `allow_internal_unstable` features from the macros
- Removes the `libstd_thread_internals` feature. (Merged with `thread_local_internals`.)
- And removes it from the unstable book
- Gets rid of the deeply nested modules for the `Key` definitions (`mod fast` / `mod os` / `mod statik`).
- Turns a `#[cfg]` mess into a single `cfg_if`, now that there's no `#[macro_export]` anymore that breaks with `cfg_if`.
- Simplifies the `cfg_if` conditions to not repeat the conditions.
- Removes useless `normalize-stderr-test`, which were left over from when the `Key` types had different names on different platforms.
- Removes a seemingly unnecessary `realstd` re-export on `cfg(test)`.
This PR changes nothing about the thread local implementation. That's for a later PR. (Which should hopefully be easier once all this stuff is a bit cleaned up.)
Spelling library
Split per https://github.com/rust-lang/rust/pull/110392
I can squash once people are happy w/ the changes. It's really uncommon for large sets of changes to be perfectly acceptable w/o at least some changes.
I probably won't have time to respond until tomorrow or the next day
Fix `std` compilation error for wasi+atomics
Fix https://github.com/rust-lang/rust/issues/109727
It seems that the `unsupported/once.rs` module isn't meant to exist at the same time as the `futex` module, as they have conflicting definitions.
I've solved this by defining the `once` module only if `not(target_feature = "atomics")`.
The `wasm32-unknown-unknown` target [similarly only defines the `once` module if `not(target_feature = "atomics")`](01c4f31927/library/std/src/sys/wasm/mod.rs (L69-L70)).
As show in [this block of code](01c4f31927/library/std/src/sys_common/once/mod.rs (L10-L34)), the `sys::once` module doesn't need to exist if `all(target_arch = "wasm32", target_feature = "atomics")`.
NotFound errors:
* `ERROR_INVALID_DRIVE`: The system cannot find the drive specified
* `ERROR_BAD_NETPATH`: The network path was not found
* `ERROR_BAD_NET_NAME`: The network name cannot be found.
InvalidFilename:
* `ERROR_BAD_PATHNAME`: The specified path is invalid.
linkat() not available in the system headers of Solaris 10
I've installed rustup on x86_64-unknown-linux-gnu and would like to use the target sparcv9-sun-solaris. For this, I have built a gcc from the source code for cross-compiling to sparcv9-sun-solaris2.10 with system headers of Solaris 10.
With the following hello word example:
main.rs:
```rust
fn main() {
println!("Hello, world!");
}
```
I had a compilation error:
```
$ rustc -v --target sparcv9-sun-solaris -C linker=/opt/cross-solaris/gcc730/bin/sparcv9-sun-solaris2.10-gcc main.rs
error: linking with `/opt/cross-solaris/gcc730/bin/sparcv9-sun-solaris2.10-gcc` failed: exit status: 1
|
= note: "/opt/cross-solaris/gcc730/bin/sparcv9-sun-solaris2.10-gcc" "-m64" "/tmp/rustcgebYgj/symbols.o" "main.main.89363361-cgu.0.rcgu.o" "main.main.89363361-cgu.1.rcgu.o" "main.main.89363361-cgu.2.rcgu.o" "main.main.89363361-cgu.3.rcgu.o" "main.main.89363361-cgu.4.rcgu.o" "main.main.89363361-cgu.5.rcgu.o" "main.csypsau9u2r8348.rcgu.o" "-Wl,-z,ignore" "-L" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib" "-Wl,-Bstatic" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libstd-fa47c8247d587714.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libpanic_unwind-5c87bbe223e6c2a3.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libobject-d484934062ff9fbb.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libmemchr-e8dbd5835abcbf43.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libaddr2line-909ad09329bde2f9.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libgimli-4d74a3be929697ac.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/librustc_demangle-47cbe1d7f7271ae1.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libstd_detect-239fd2d25fb32a00.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libhashbrown-c4a7ce45fb9dec19.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libminiz_oxide-fa6bc3d9bfb4e402.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libadler-419f5a82ddd339a3.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/librustc_std_workspace_alloc-7672b378962c11be.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libunwind-0f9e07f0a032c000.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libcfg_if-ede7757c356dfb28.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/liblibc-808d56fbc668148a.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/liballoc-784767fe059ad3fe.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/librustc_std_workspace_core-aa31d7ef0556bbe1.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libcore-81d07df07db18847.rlib" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libcompiler_builtins-313a510e63006db2.rlib" "-Wl,-Bdynamic" "-lsocket" "-lposix4" "-lpthread" "-lresolv" "-lgcc_s" "-lc" "-lm" "-lrt" "-lpthread" "-lsendfile" "-llgrp" "-L" "/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib" "-o" "main" "-nodefaultlibs"
= note: /opt/cross-solaris/gcc730/lib/gcc/sparcv9-sun-solaris2.10/7.3.0/../../../../sparcv9-sun-solaris2.10/bin/ld: warning: -z ignore ignored.
/home/dlaugt/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/sparcv9-sun-solaris/lib/libstd-fa47c8247d587714.rlib(std-fa47c8247d587714.std.5c42d2c1-cgu.0.rcgu.o): In function `std::sys::unix::fs:🔗:h3683dfbfbb4995cb':
/rustc/897e37553bba8b42751c67658967889d11ecd120/library/std/src/sys/unix/fs.rs:1407: undefined reference to `linkat'
collect2: error: ld returned 1 exit status
= help: some `extern` functions couldn't be found; some native libraries may need to be installed or have their path specified
= note: use the `-l` flag to specify native libraries to link
= note: use the `cargo:rustc-link-lib` directive to specify the native libraries to link with Cargo (see https://doc.rust-lang.org/cargo/reference/build-scripts.html#cargorustc-link-libkindname)
```
linkat() is not available in the system headers of Solaris 10. The hello word example works fine when I build/use rust with this PR change.
don't splice from files into pipes in io::copy
This fixes potential data ordering issue where a write performed after a copy operation could become visible in the copy even though it signaled completion.
I assumed that by not setting `SPLICE_F_MOVE` we would be safe and the kernel would do a copy in kernel space and we could avoid the read-write syscall and copy-to/from-userspace costs. But apparently that flag only makes a difference when splicing from a pipe, but not when splicing into it.
Context: https://lkml.org/lkml/2023/2/9/673
Initial support for loongarch64-unknown-linux-gnu
Hi, We hope to add a new port in rust for LoongArch.
LoongArch intro
LoongArch is a RISC style ISA which is independently designed by Loongson
Technology in China. It is divided into two versions, the 32-bit version (LA32)
and the 64-bit version (LA64). LA64 applications have application-level
backward binary compatibility with LA32 applications. LoongArch is composed of
a basic part (Loongson Base) and an expanded part. The expansion part includes
Loongson Binary Translation (LBT), Loongson VirtualiZation (LVZ), Loongson SIMD
EXtension (LSX) and Loongson Advanced SIMD EXtension(LASX).
Currently the LA464 processor core supports LoongArch ISA and the Loongson
3A5000 processor integrates 4 64-bit LA464 cores. LA464 is a four-issue 64-bit
high-performance processor core. It can be used as a single core for high-end
embedded and desktop applications, or as a basic processor core to form an
on-chip multi-core system for server and high-performance machine applications.
Documentations:
ISA:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html
ABI:
https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html
More docs can be found at:
https://loongson.github.io/LoongArch-Documentation/README-EN.html
Since last year, we have locally adapted two versions of rust, rust1.41 and rust1.57, and completed the test locally.
I'm not sure if I'm submitting all the patches at once, so I split up the patches and here's one of the commits
Fix buffer overrun in bootstrap and (test-only) symlink_junction
I don't think these can be hit in practice, due to their inputs being valid paths. It's also not security-sensitive code, but just... bad vibes.
I think this is still not really the right way to do this (in terms of path correctness), but is no worse than it was.
r? `@ChrisDenton`
Use `getentropy()` instead of `/dev/urandom` on Emscripten
`/dev/urandom` is usually available on Emscripten, except when using
the special `NODERAWFS` filesystem backend, which replaces all normal
filesystem access with direct Node.js operations.
Since this filesystem backend directly access the filesystem on the
OS, it is not recommended to depend on `/dev/urandom`, especially
when trying to run the Wasm binary on OSes that are not Unix-based.
This can be considered a non-functional change, since Emscripten
implements `/dev/urandom` in the same way as `getentropy()` when not
linking with `-sNODERAWFS`.
Use random `HashMap` keys on Hermit
Initializing the keys with random data provided by the libOS avoids HashDOS attacks and similar issues.
CC `@stlankes`
Support TLS access into dylibs on Windows
This allows access to `#[thread_local]` in upstream dylibs on Windows by introducing a MIR shim to return the address of the thread local. Accesses that go into an upstream dylib will call the MIR shim to get the address of it.
`convert_tls_rvalues` is introduced in `rustc_codegen_ssa` which rewrites MIR TLS accesses to dummy calls which are replaced with calls to the MIR shims when the dummy calls are lowered to backend calls.
A new `dll_tls_export` target option enables this behavior with a `false` value which is set for Windows platforms.
This fixes https://github.com/rust-lang/rust/issues/84933.
`OsStr` has historically kept its implementation details private out of
concern for locking us into a specific encoding on Windows.
This is an alternative to #95290 which proposed specifying the encoding on Windows. Instead, this
only specifies that for cross-platform code, `OsStr`'s encoding is a superset of UTF-8 and defines
rules for safely interacting with it
At minimum, this can greatly simplify the `os_str_bytes` crate and every
arg parser that interacts with `OsStr` directly (which is most of those
that support invalid UTF-8).
