`compiler_builtins` is currently injected as `extern crate
compiler_builtins as _`. This has made gating via diagnostics difficult
because it appears in the crate graph as a non-private dependency, and
there isn't an easy way to differentiate between the injected AST and
user-specified `extern crate compiler_builtins`.
Resolve this by injecting `compiler_builtins` during postprocessing
rather than early in the AST. Most of the time this isn't even needed
because it shows up in `std` or `core`'s crate graph, but injection is
still needed to ensure `#![no_core]` works correctly.
A similar change was attempted at [1] but this encountered errors
building `proc_macro` and `rustc-std-workspace-std`. Similar failures
showed up while working on this patch, which were traced back to
`compiler_builtins` showing up in the graph twice (once via dependency
and once via injection). This is resolved by not injecting if a
`#![compiler_builtins]` crate already exists.
[1]: https://github.com/rust-lang/rust/pull/113634
Add a TyPat in the AST to reuse the generic arg lowering logic
This simplifies ast lowering significantly with little cost to the pattern types parser.
Also fixes any problems we've had with generic args (well, pushes any problems onto the `generic_const_exprs` feature gate)
follow-up to https://github.com/rust-lang/rust/pull/136284#discussion_r1939292367
r? ``@BoxyUwU``
Introduce CoercePointeeWellformed for coherence checks at typeck stage
Fix#135206
This is the first PR to introduce the "wellformedness" check for `derive(CoercePointee)`.
This patch introduces a new error code to cover all the prerequisites of the said macro. The checks that is enforced with this patch is whether the data is indeed `struct` and whether the layout is set to `repr(transparent)`.
A following series of patch will arrive later to address the following concern.
1. #135217 so that we would only admit one single coercion on one type parameter, and leave the rest for future consideration in tandem of development of other coercion rules.
1. Enforcement of data field requirements.
**An open question** is whether there is a good schema to encode the `#[pointee]` as well, so that we could also check if the `#[pointee]` type parameter is indeed `?Sized`.
``@rustbot`` label F-derive_coerce_pointee
tree-wide: parallel: Fully removed all `Lrc`, replaced with `Arc`
tree-wide: parallel: Fully removed all `Lrc`, replaced with `Arc`
This is continuation of https://github.com/rust-lang/rust/pull/132282 .
I'm pretty sure I did everything right. In particular, I searched all occurrences of `Lrc` in submodules and made sure that they don't need replacement.
There are other possibilities, through.
We can define `enum Lrc<T> { Rc(Rc<T>), Arc(Arc<T>) }`. Or we can make `Lrc` a union and on every clone we can read from special thread-local variable. Or we can add a generic parameter to `Lrc` and, yes, this parameter will be everywhere across all codebase.
So, if you think we should take some alternative approach, then don't merge this PR. But if it is decided to stick with `Arc`, then, please, merge.
cc "Parallel Rustc Front-end" ( https://github.com/rust-lang/rust/issues/113349 )
r? SparrowLii
`@rustbot` label WG-compiler-parallel
This has now been approved as a language feature and no longer needs
a `rustc_` prefix.
Also change the `contracts` feature to be marked as incomplete and
`contracts_internals` as internal.
Instead of parsing the different components of a function signature,
eagerly look for either the `where` keyword or the function body.
- Also address feedback to use `From` instead of `TryFrom` in cranelift
contract and ubcheck codegen.
The extended syntax for function signature that includes contract clauses
should never be user exposed versus the interface we want to ship
externally eventually.
includes post-developed commit: do not suggest internal-only keywords as corrections to parse failures.
includes post-developed commit: removed tabs that creeped in into rustfmt tool source code.
includes post-developed commit, placating rustfmt self dogfooding.
includes post-developed commit: add backquotes to prevent markdown checking from trying to treat an attr as a markdown hyperlink/
includes post-developed commit: fix lowering to keep contracts from being erroneously inherited by nested bodies (like closures).
Rebase Conflicts:
- compiler/rustc_parse/src/parser/diagnostics.rs
- compiler/rustc_parse/src/parser/item.rs
- compiler/rustc_span/src/hygiene.rs
Remove contracts keywords from diagnostic messages
Provide a new function `listify`, meant to be used in cases similar to `pluralize!`. When you have a slice of arbitrary elements that need to be presented to the user, `listify` allows you to turn that into a list of comma separated strings.
This reduces a lot of redundant logic that happens often in diagnostics.
Point at invalid utf-8 span on user's source code
```
error: couldn't read `$DIR/not-utf8-bin-file.rs`: stream did not contain valid UTF-8
--> $DIR/not-utf8-2.rs:6:5
|
LL | include!("not-utf8-bin-file.rs");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: byte `193` is not valid utf-8
--> $DIR/not-utf8-bin-file.rs:2:14
|
LL | let _ = "�|�␂!5�cc␕␂��";
| ^
= note: this error originates in the macro `include` (in Nightly builds, run with -Z macro-backtrace for more info)
```
When we attempt to load a Rust source code file, if there is a OS file failure we try reading the file as bytes. If that succeeds we try to turn it into UTF-8. If *that* fails, we provide additional context about *where* the file has the first invalid UTF-8 character.
Fix#76869.
```
error: couldn't read `$DIR/not-utf8-bin-file.rs`: stream did not contain valid UTF-8
--> $DIR/not-utf8-2.rs:6:5
|
LL | include!("not-utf8-bin-file.rs");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: `[193]` is not valid utf-8
--> $DIR/not-utf8-bin-file.rs:2:14
|
LL | let _ = "�|�␂!5�cc␕␂��";
| ^
= note: this error originates in the macro `include` (in Nightly builds, run with -Z macro-backtrace for more info)
```
When we attempt to load a Rust source code file, if there is a OS file failure we try reading the file as bytes. If that succeeds we try to turn it into UTF-8. If *that* fails, we provide additional context about *where* the file has the first invalid UTF-8 character.
Fix#76869.
Use orphaned error code for the same error it belonged to before.
```
error[E0665]: `#[derive(Default)]` on enum with no `#[default]`
--> $DIR/macros-nonfatal-errors.rs:42:10
|
LL | #[derive(Default)]
| ^^^^^^^
LL | / enum NoDeclaredDefault {
LL | | Foo,
LL | | Bar,
LL | | }
| |_- this enum needs a unit variant marked with `#[default]`
|
= note: this error originates in the derive macro `Default` (in Nightly builds, run with -Z macro-backtrace for more info)
help: make this unit variant default by placing `#[default]` on it
|
LL | #[default] Foo,
| ~~~~~~~~~~~~~~
help: make this unit variant default by placing `#[default]` on it
|
LL | #[default] Bar,
| ~~~~~~~~~~~~~~
```
The parser pushes a `TokenType` to `Parser::expected_token_types` on
every call to the various `check`/`eat` methods, and clears it on every
call to `bump`. Some of those `TokenType` values are full tokens that
require cloning and dropping. This is a *lot* of work for something
that is only used in error messages and it accounts for a significant
fraction of parsing execution time.
This commit overhauls `TokenType` so that `Parser::expected_token_types`
can be implemented as a bitset. This requires changing `TokenType` to a
C-style parameterless enum, and adding `TokenTypeSet` which uses a
`u128` for the bits. (The new `TokenType` has 105 variants.)
The new types `ExpTokenPair` and `ExpKeywordPair` are now arguments to
the `check`/`eat` methods. This is for maximum speed. The elements in
the pairs are always statically known; e.g. a
`token::BinOp(token::Star)` is always paired with a `TokenType::Star`.
So we now compute `TokenType`s in advance and pass them in to
`check`/`eat` rather than the current approach of constructing them on
insertion into `expected_token_types`.
Values of these pair types can be produced by the new `exp!` macro,
which is used at every `check`/`eat` call site. The macro is for
convenience, allowing any pair to be generated from a single identifier.
The ident/keyword filtering in `expected_one_of_not_found` is no longer
necessary. It was there to account for some sloppiness in
`TokenKind`/`TokenType` comparisons.
The existing `TokenType` is moved to a new file `token_type.rs`, and all
its new infrastructure is added to that file. There is more boilerplate
code than I would like, but I can't see how to make it shorter.
`rustc_span::symbol` defines some things that are re-exported from
`rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some
closely related things such as `Ident` and `kw`. So you can do `use
rustc_span::{Symbol, sym}` but you have to do `use
rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good
reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`,
and changes many `rustc_span::symbol::` qualifiers in `compiler/` to
`rustc_span::`. This is a 200+ net line of code reduction, mostly
because many files with two `use rustc_span` items can be reduced to
one.
Because `TokenStreamIter` is a much better name for a `TokenStream`
iterator. Also rename the `TokenStream::trees` method as
`TokenStream::iter`, and some local variables.
Add AST support for unsafe binders
I'm splitting up #130514 into pieces. It's impossible for me to keep up with a huge PR like that. I'll land type system support for this next, probably w/o MIR lowering, which will come later.
r? `@oli-obk`
cc `@BoxyUwU` and `@lcnr` who also may want to look at this, though this PR doesn't do too much yet
When we expand a `mod foo;` and parse `foo.rs`, we now track whether that file had an unrecovered parse error that reached the end of the file. If so, we keep that information around. When resolving a path like `foo::bar`, we do not emit any errors for "`bar` not found in `foo`", as we know that the parse error might have caused `bar` to not be parsed and accounted for.
When this happens in an existing project, every path referencing `foo` would be an irrelevant compile error. Instead, we now skip emitting anything until `foo.rs` is fixed. Tellingly enough, we didn't have any test for errors caused by `mod` expansion.
Fix#97734.
Initial implementation of `#[feature(default_field_values]`, proposed in https://github.com/rust-lang/rfcs/pull/3681.
Support default fields in enum struct variant
Allow default values in an enum struct variant definition:
```rust
pub enum Bar {
Foo {
bar: S = S,
baz: i32 = 42 + 3,
}
}
```
Allow using `..` without a base on an enum struct variant
```rust
Bar::Foo { .. }
```
`#[derive(Default)]` doesn't account for these as it is still gating `#[default]` only being allowed on unit variants.
Support `#[derive(Default)]` on enum struct variants with all defaulted fields
```rust
pub enum Bar {
#[default]
Foo {
bar: S = S,
baz: i32 = 42 + 3,
}
}
```
Check for missing fields in typeck instead of mir_build.
Expand test with `const` param case (needs `generic_const_exprs` enabled).
Properly instantiate MIR const
The following works:
```rust
struct S<A> {
a: Vec<A> = Vec::new(),
}
S::<i32> { .. }
```
Add lint for default fields that will always fail const-eval
We *allow* this to happen for API writers that might want to rely on users'
getting a compile error when using the default field, different to the error
that they would get when the field isn't default. We could change this to
*always* error instead of being a lint, if we wanted.
This will *not* catch errors for partially evaluated consts, like when the
expression relies on a const parameter.
Suggestions when encountering `Foo { .. }` without `#[feature(default_field_values)]`:
- Suggest adding a base expression if there are missing fields.
- Suggest enabling the feature if all the missing fields have optional values.
- Suggest removing `..` if there are no missing fields.
Refactor `where` predicates, and reserve for attributes support
Refactor `WherePredicate` to `WherePredicateKind`, and reserve for attributes support in `where` predicates.
This is a part of #115590 and is split from #132388.
r? petrochenkov
When labels are present, the `noreturn` option really means that asm block
won't fallthrough -- if labels are present, then outputs can still be
meaningfully used.
Unify FnKind between AST visitors and make WalkItemKind more straight forward
Unifying `FnKind` requires a bunch of changes to `WalkItemKind::walk` signature so I'll change them in one go
related to #128974
r? `@petrochenkov`
Important: we know from the `parse_annotatable_with` call above the call
site that only some of the `Annotatable` variants are possible. The
remaining cases can be replaced with `unreachable!`.
They each have a single callsite, and the result is always unwrapped, so
the `Option<Annotatable>` return type is misleading.
Also, the comment at the `configure_annotatable` call site is wrong,
talking about a result vector, so this commit also removes that.
Rename macro `SmartPointer` to `CoercePointee`
As per resolution #129104 we will rename the macro to better reflect the technical specification of the feature and clarify the communication.
- `SmartPointer` is renamed to `CoerceReferent`
- `#[pointee]` attribute is renamed to `#[referent]`
- `#![feature(derive_smart_pointer)]` gate is renamed to `#![feature(derive_coerce_referent)]`.
- Any mention of `SmartPointer` in the file names are renamed accordingly.
r? `@compiler-errors`
cc `@nikomatsakis` `@Darksonn`
Const stability checks v2
The const stability system has served us well ever since `const fn` were first stabilized. It's main feature is that it enforces *recursive* validity -- a stable const fn cannot internally make use of unstable const features without an explicit marker in the form of `#[rustc_allow_const_fn_unstable]`. This is done to make sure that we don't accidentally expose unstable const features on stable in a way that would be hard to take back. As part of this, it is enforced that a `#[rustc_const_stable]` can only call `#[rustc_const_stable]` functions. However, some problems have been coming up with increased usage:
- It is baffling that we have to mark private or even unstable functions as `#[rustc_const_stable]` when they are used as helpers in regular stable `const fn`, and often people will rather add `#[rustc_allow_const_fn_unstable]` instead which was not our intention.
- The system has several gaping holes: a private `const fn` without stability attributes whose inherited stability (walking up parent modules) is `#[stable]` is allowed to call *arbitrary* unstable const operations, but can itself be called from stable `const fn`. Similarly, `#[allow_internal_unstable]` on a macro completely bypasses the recursive nature of the check.
Fundamentally, the problem is that we have *three* disjoint categories of functions, and not enough attributes to distinguish them:
1. const-stable functions
2. private/unstable functions that are meant to be callable from const-stable functions
3. functions that can make use of unstable const features
Functions in the first two categories cannot use unstable const features and they can only call functions from the first two categories.
This PR implements the following system:
- `#[rustc_const_stable]` puts functions in the first category. It may only be applied to `#[stable]` functions.
- `#[rustc_const_unstable]` by default puts functions in the third category. The new attribute `#[rustc_const_stable_indirect]` can be added to such a function to move it into the second category.
- `const fn` without a const stability marker are in the second category if they are still unstable. They automatically inherit the feature gate for regular calls, it can now also be used for const-calls.
Also, all the holes mentioned above have been closed. There's still one potential hole that is hard to avoid, which is when MIR building automatically inserts calls to a particular function in stable functions -- which happens in the panic machinery. Those need to be manually marked `#[rustc_const_stable_indirect]` to be sure they follow recursive const stability. But that's a fairly rare and special case so IMO it's fine.
The net effect of this is that a `#[unstable]` or unmarked function can be constified simply by marking it as `const fn`, and it will then be const-callable from stable `const fn` and subject to recursive const stability requirements. If it is publicly reachable (which implies it cannot be unmarked), it will be const-unstable under the same feature gate. Only if the function ever becomes `#[stable]` does it need a `#[rustc_const_unstable]` or `#[rustc_const_stable]` marker to decide if this should also imply const-stability.
Adding `#[rustc_const_unstable]` is only needed for (a) functions that need to use unstable const lang features (including intrinsics), or (b) `#[stable]` functions that are not yet intended to be const-stable. Adding `#[rustc_const_stable]` is only needed for functions that are actually meant to be directly callable from stable const code. `#[rustc_const_stable_indirect]` is used to mark intrinsics as const-callable and for `#[rustc_const_unstable]` functions that are actually called from other, exposed-on-stable `const fn`. No other attributes are required.
Also see the updated dev-guide at https://github.com/rust-lang/rustc-dev-guide/pull/2098.
I think in the future we may want to tweak this further, so that in the hopefully common case where a public function's const-stability just exactly mirrors its regular stability, we never have to add any attribute. But right now, once the function is stable this requires `#[rustc_const_stable]`.
### Open question
There is one point I could see we might want to do differently, and that is putting `#[rustc_const_unstable]` functions (but not intrinsics) in category 2 by default, and requiring an extra attribute for `#[rustc_const_not_exposed_on_stable]` or so. This would require a bunch of extra annotations, but would have the advantage that turning a `#[rustc_const_unstable]` into `#[rustc_const_stable]` will never change the way the function is const-checked. Currently, we often discover in the const stabilization PR that a function needs some other unstable const things, and then we rush to quickly deal with that. In this alternative universe, we'd work towards getting rid of the `rustc_const_not_exposed_on_stable` before stabilization, and once that is done stabilization becomes a trivial matter. `#[rustc_const_stable_indirect]` would then only be used for intrinsics.
I think I like this idea, but might want to do it in a follow-up PR, as it will need a whole bunch of annotations in the standard library. Also, we probably want to convert all const intrinsics to the "new" form (`#[rustc_intrinsic]` instead of an `extern` block) before doing this to avoid having to deal with two different ways of declaring intrinsics.
Cc `@rust-lang/wg-const-eval` `@rust-lang/libs-api`
Part of https://github.com/rust-lang/rust/issues/129815 (but not finished since this is not yet sufficient to safely let us expose `const fn` from hashbrown)
Fixes https://github.com/rust-lang/rust/issues/131073 by making it so that const-stable functions are always stable
try-job: test-various
Rollup of 9 pull requests
Successful merges:
- #122670 (Fix bug where `option_env!` would return `None` when env var is present but not valid Unicode)
- #131095 (Use environment variables instead of command line arguments for merged doctests)
- #131339 (Expand set_ptr_value / with_metadata_of docs)
- #131652 (Move polarity into `PolyTraitRef` rather than storing it on the side)
- #131675 (Update lint message for ABI not supported)
- #131681 (Fix up-to-date checking for run-make tests)
- #131702 (Suppress import errors for traits that couldve applied for method lookup error)
- #131703 (Resolved python deprecation warning in publish_toolstate.py)
- #131710 (Remove `'apostrophes'` from `rustc_parse_format`)
r? `@ghost`
`@rustbot` modify labels: rollup
Move polarity into `PolyTraitRef` rather than storing it on the side
Arguably we could move these modifiers into `TraitRef` instead of `PolyTraitRef`, but I see `TraitRef` as simply the *path* part of the trait ref. It doesn't really matter -- refactoring this further is much easier now.
Fix bug where `option_env!` would return `None` when env var is present but not valid Unicode
Fixes#122669 by making `option_env!` emit an error when the value of the environment variable is not valid Unicode.
Autodiff Upstreaming - enzyme frontend
This is an upstream PR for the `autodiff` rustc_builtin_macro that is part of the autodiff feature.
For the full implementation, see: https://github.com/rust-lang/rust/pull/129175
**Content:**
It contains a new `#[autodiff(<args>)]` rustc_builtin_macro, as well as a `#[rustc_autodiff]` builtin attribute.
The autodiff macro is applied on function `f` and will expand to a second function `df` (name given by user).
It will add a dummy body to `df` to make sure it type-checks. The body will later be replaced by enzyme on llvm-ir level,
we therefore don't really care about the content. Most of the changes (700 from 1.2k) are in `compiler/rustc_builtin_macros/src/autodiff.rs`, which expand the macro. Nothing except expansion is implemented for now.
I have a fallback implementation for relevant functions in case that rustc should be build without autodiff support. The default for now will be off, although we want to flip it later (once everything landed) to on for nightly. For the sake of CI, I have flipped the defaults, I'll revert this before merging.
**Dummy function Body:**
The first line is an `inline_asm` nop to make inlining less likely (I have additional checks to prevent this in the middle end of rustc. If `f` gets inlined too early, we can't pass it to enzyme and thus can't differentiate it.
If `df` gets inlined too early, the call site will just compute this dummy code instead of the derivatives, a correctness issue. The following black_box lines make sure that none of the input arguments is getting optimized away before we replace the body.
**Motivation:**
The user facing autodiff macro can verify the user input. Then I write it as args to the rustc_attribute, so from here on I can know that these values should be sensible. A rustc_attribute also turned out to be quite nice to attach this information to the corresponding function and carry it till the backend.
This is also just an experiment, I expect to adjust the user facing autodiff macro based on user feedback, to improve usability.
As a simple example of what this will do, we can see this expansion:
From:
```
#[autodiff(df, Reverse, Duplicated, Const, Active)]
pub fn f1(x: &[f64], y: f64) -> f64 {
unimplemented!()
}
```
to
```
#[rustc_autodiff]
#[inline(never)]
pub fn f1(x: &[f64], y: f64) -> f64 {
::core::panicking::panic("not implemented")
}
#[rustc_autodiff(Reverse, Duplicated, Const, Active,)]
#[inline(never)]
pub fn df(x: &[f64], dx: &mut [f64], y: f64, dret: f64) -> f64 {
unsafe { asm!("NOP"); };
::core::hint::black_box(f1(x, y));
::core::hint::black_box((dx, dret));
::core::hint::black_box(f1(x, y))
}
```
I will add a few more tests once I figured out why rustc rebuilds every time I touch a test.
Tracking:
- https://github.com/rust-lang/rust/issues/124509
try-job: dist-x86_64-msvc
Special treatment empty tuple when suggest adding a string literal in format macro.
For example:
```rust
let s = "123";
println!({}, "sss", s);
```
Suggest:
`println!("{:?} {} {}", {}, "sss", s);`
fixes#130170
Retire the `unnamed_fields` feature for now
`#![feature(unnamed_fields)]` was implemented in part in #115131 and #115367, however work on that feature has (afaict) stalled and in the mean time there have been some concerns raised (e.g.[^1][^2]) about whether `unnamed_fields` is worthwhile to have in the language, especially in its current desugaring. Because it represents a compiler implementation burden including a new kind of anonymous ADT and additional complication to field selection, and is quite prone to bugs today, I'm choosing to remove the feature.
However, since I'm not one to really write a bunch of words, I'm specifically *not* going to de-RFC this feature. This PR essentially *rolls back* the state of this feature to "RFC accepted but not yet implemented"; however if anyone wants to formally unapprove the RFC from the t-lang side, then please be my guest. I'm just not totally willing to summarize the various language-facing reasons for why this feature is or is not worthwhile, since I'm coming from the compiler side mostly.
Fixes#117942Fixes#121161Fixes#121263Fixes#121299Fixes#121722Fixes#121799Fixes#126969Fixes#131041
Tracking:
* https://github.com/rust-lang/rust/issues/49804
[^1]: https://rust-lang.zulipchat.com/#narrow/stream/213817-t-lang/topic/Unnamed.20struct.2Funion.20fields
[^2]: https://github.com/rust-lang/rust/issues/49804#issuecomment-1972619108
Don't allow the `#[pointee]` attribute where it doesn't belong
Error if the `#[pointee]` attribute is applied to anything but generic type parameters.
Closes#128485
Related to #123430
- fix for divergence
- fix error message
- fix another cranelift test
- fix some cranelift things
- don't set the NORETURN option for naked asm
- fix use of naked_asm! in doc comment
- fix use of naked_asm! in run-make test
- use `span_bug` in unreachable branch
Fix error span if arg to `asm!()` is a macro call
Fixes#129503
When the argument to `asm!()` is a macro call, e.g. `asm!(concat!("abc", "{} pqr"))`, and there's an error in the resulting template string, we do not take into account the presence of this macro call while computing the error span. This PR fixes that. Now we will use the entire thing between the parenthesis of `asm!()` as the error span in this situation e.g. for `asm!(concat!("abc", "{} pqr"))` the error span will be `concat!("abc", "{} pqr")`.
When the template string passed to asm!() is produced by
a macro call like concat!() we were producing wrong error
spans. Now in the case of a macro call we just use the entire
arg to asm!(), macro call and all, as the error span.
- Replace non-standard names like 's, 'p, 'rg, 'ck, 'parent, 'this, and
'me with vanilla 'a. These are cases where the original name isn't
really any more informative than 'a.
- Replace names like 'cx, 'mir, and 'body with vanilla 'a when the lifetime
applies to multiple fields and so the original lifetime name isn't
really accurate.
- Put 'tcx last in lifetime lists, and 'a before 'b.
Simplify some nested `if` statements
Applies some but not all instances of `clippy::collapsible_if`. Some ended up looking worse afterwards, though, so I left those out. Also applies instances of `clippy::collapsible_else_if`
Review with whitespace disabled please.
Fix false positive with `missing_docs` and `#[test]`
Since #130025, the compiler don't ignore missing_docs when compiling the tests. But there is now a false positive warning for every `#[test]`
For example, this code
```rust
//! Crate docs
fn just_a_test() {}
```
Would emit this warning when running `cargo test`
```
warning: missing documentation for a constant
--> src/lib.rs:5:1
|
4 | #[test]
| ------- in this procedural macro expansion
5 | fn just_a_test() {}
| ^^^^^^^^^^^^^^^^^^^
```
Since #130025, the compiler don't ignore missing_docs when compiling the tests.
But there is now a false positive warning for every `#[test]`
For example, this code
```rust
//! Crate docs
fn just_a_test() {}
```
Would emit this warning when running `cargo test`
```
warning: missing documentation for a constant
--> src/lib.rs:5:1
|
4 | #[test]
| ------- in this procedural macro expansion
5 | fn just_a_test() {}
| ^^^^^^^^^^^^^^^^^^^
```
Also emit `missing_docs` lint with `--test` to fulfil expectations
This PR removes the "test harness" suppression of the `missing_docs` lint to be able to fulfil `#[expect]` (expectations) as it is now "relevant".
I think the goal was to maybe avoid false-positive while linting on public items under `#[cfg(test)]` but with effective visibility we should no longer have any false-positive.
Another possibility would be to query the lint level and only emit the lint if it's of expect level, but that is even more hacky.
Fixes https://github.com/rust-lang/rust/issues/130021
try-job: x86_64-gnu-aux
