Fix bug in shebang handling
Shebang handling was too agressive in stripping out the first line in cases where it is actually _not_ a shebang, but instead, valid rust (#70528). This is a second attempt at resolving this issue (the first attempt was reverted, for, among other reasons, causing an ICE in certain cases (#71372, #71471).
The behavior is now codified by a number of UI tests, but simply:
For the first line to be a shebang, the following must all be true:
1. The line must start with `#!`
2. The line must contain a non-whitespace character after `#!`
3. The next character in the file, ignoring comments & whitespace must not be `[`
I believe this is a strict superset of what we used to allow, so perhaps a crater run is unnecessary, but probably not a terrible idea.
Fixes#70528
Perform MIR NRVO even if types don't match
This is the most straightforward way to resolve#72428, but it could cause problems in codegen since the type of `_0` may no longer match the return type of the body.
add regression tests for stalled_on const vars
closes#70180
Afaict this has been fixed sometime after #70213
`trait_ref_type_vars` correctly adds const infers and I did not find any remaining `FIXME`s which correspond to this issue.
7c59a81a5f/src/librustc_trait_selection/traits/fulfill.rs (L555-L557)
Added both examples from the issue as regression tests and renamed `trait_ref_type_vars` -> `trait_ref_infer_vars`.
r? @eddyb
Rollup of 4 pull requests
Successful merges:
- #72153 (exhaustively check `ty::Kind` during structural match checking)
- #72308 (Emit a better diagnostic when function actually has a 'self' parameter)
- #72560 (Enable `glacier` command via triagebot)
- #72567 (Clean up E0608 explanation)
Failed merges:
r? @ghost
Emit a better diagnostic when function actually has a 'self' parameter
Fixes#66898
When we are unable to resolve a reference to `self`, we current assume
that the containing function doesn't have a `self` parameter, and
emit an error message accordingly.
However, if the reference to `self` was created by a macro invocation,
then resolution will correctly fail, due to hygiene. In this case, we
don't want to tell the user that the containing fuction doesn't have a
'self' paramter if it actually has one.
This PR checks for the precense of a 'self' parameter, and adjusts the
error message we emit accordingly.
TODO: The exact error message we emit could probably be improved. Should
we explicitly mention hygiene?
exhaustively check `ty::Kind` during structural match checking
This was prone to errors as we may forget new kinds in the future.
I am also not yet sure about some kinds.
`ty::GeneratorWitness(..) | ty::Infer(_) | ty::Placeholder(_) | ty::UnnormalizedProjection(..) | ty::Bound(..)` might be unreachable here.
We may want to forbid `ty::Projection`, similar to `ty::Param`.
`ty::Opaque` seems fine afaict, should not be possible in a match atm.
I believe `ty::Foreign` should not be structurally match, as I don't even know what
that would actually mean.
r? @pnkfelix cc @eddyb
Shebang handling was too agressive in stripping out the first line in cases where it is actually _not_ a shebang, but instead, valid rust (#70528). This is a second attempt at resolving this issue (the first attempt was flawed, for, among other reasons, causing an ICE in certain cases (#71372, #71471).
The behavior is now codified by a number of UI tests, but simply:
For the first line to be a shebang, the following must all be true:
1. The line must start with `#!`
2. The line must contain a non whitespace character after `#!`
3. The next character in the file, ignoring comments & whitespace must not be `[`
I believe this is a strict superset of what we used to allow, so perhaps a crater run is unnecessary, but probably not a terrible idea.
First draft documenting Debug stability.
Debug implementations of std types aren't stable, and neither are derived Debug implementations for any types, including user-defined types. This commit adds a section to the Debug documentation noting this stability status.
This issue is tracked by #62794.
librustc_middle: Rename upvars query to upvars_mentioned
As part of supporting RFC 2229, we will be capturing all the Places that
were mentioned in the closure.
This commit modifies the name of the upvars query to upvars_mentioned.
r? @nikomatsakis @blitzerr @matthewjasper
Miri casts: do not blindly rely on dest type
Make sure that we notice when the MIR is bad and the casted-to and destination type are e.g. of different size, as suggested by @eddyb.
Add `len` and `slice_from_raw_parts` to `NonNull<[T]>`
This follows the precedent of the recently-added `<*const [T]>::len` (adding to its tracking issue https://github.com/rust-lang/rust/issues/71146) and `ptr::slice_from_raw_parts`.
Debug implementations of std types aren't stable, and neither are
derived Debug implementations for any types, including user-defined
types. This commit adds a section to the Debug documentatio noting this
stability status.
Store tokens inside `ast::Expr`
This is a smaller version of #70091.
We now store captured tokens inside `ast::Expr`, which allows us to avoid some reparsing in `nt_to_tokenstream`. To try to mitigate the performance impact, we only collect tokens when we've seen an outer attribute.
This makes progress towards solving #43081. There are still many things left to do:
* Collect tokens for other AST items.
* Come up with a way to handle inner attributes (we need to be collecting tokens by the time we encounter them)
* Avoid re-parsing when a `#[cfg]` attr is used.
However, this is enough to fix spans for a simple example, which I've included as a test case.
Rollup of 5 pull requests
Successful merges:
- #72402 (Remove all uses of `NodeId` in `ResolverOutputs`)
- #72527 (bootstrap: propagate test-args to miri and clippy test suites)
- #72530 (Clean up E0602 explanation)
- #72532 (Use `dyn` trait syntax in more comments and docs)
- #72535 (Use sort_unstable_by in its own docs)
Failed merges:
r? @ghost
As part of supporting RFC 2229, we will be capturing all the Places that
were mentioned in the closure.
This commit modifies the name of the upvars query to upvars_mentioned.
Co-authored-by: Aman Arora <me@aman-arora.com>
Co-authored-by: Chris Pardy <chrispardy36@gmail.com>
bootstrap: propagate test-args to miri and clippy test suites
For Miri I verified this works. For clippy, unfortunately it doesn't seem to work as a stage 0 tool:
```
./x.py --stage 0 test src/tools/clippy --test-args init
```
gives
```
Compiling clippy-mini-macro-test v0.2.0 (/home/r/src/rust/rustc.3/src/tools/clippy/mini-macro)
error[E0658]: procedural macros cannot be expanded to expressions
--> src/tools/clippy/mini-macro/src/lib.rs:11:5
|
11 | / quote!(
12 | | #[allow(unused)]
13 | | fn needless_take_by_value(s: String) {
14 | | println!("{}", s.len());
... |
24 | | }
25 | | )
| |_____^
|
= note: see issue #54727 <https://github.com/rust-lang/rust/issues/54727> for more information
= help: add `#![feature(proc_macro_hygiene)]` to the crate attributes to enable
Compiling proc-macro2 v1.0.3
Compiling syn v1.0.11
error: aborting due to previous error
For more information about this error, try `rustc --explain E0658`.
error: could not compile `clippy-mini-macro-test`.
```
But propagating `--test-args` to the test suite seems to make sense regardless.
Cc @rust-lang/clippy
