Store a `Symbol` instead of an `Ident` in `VariantDef`/`FieldDef`
The field is also renamed from `ident` to `name`. In most cases,
we don't actually need the `Span`. A new `ident` method is added
to `VariantDef` and `FieldDef`, which constructs the full `Ident`
using `tcx.def_ident_span()`. This method is used in the cases
where we actually need an `Ident`.
This makes incremental compilation properly track changes
to the `Span`, without all of the invalidations caused by storing
a `Span` directly via an `Ident`.
Actually instantiate the opaque type when checking bounds
Before this change, `instantiate_opaque_types` was a no-op, because it only works relative to the defined opaque type inference anchor. If it is a no-op, the for loop will not actually have anything to iterate over, and thus nothing is checked at all.
The field is also renamed from `ident` to `name. In most cases,
we don't actually need the `Span`. A new `ident` method is added
to `VariantDef` and `FieldDef`, which constructs the full `Ident`
using `tcx.def_ident_span()`. This method is used in the cases
where we actually need an `Ident`.
This makes incremental compilation properly track changes
to the `Span`, without all of the invalidations caused by storing
a `Span` directly via an `Ident`.
Replace usages of vec![].into_iter with [].into_iter
`[].into_iter` is idiomatic over `vec![].into_iter` because its simpler and faster (unless the vec is optimized away in which case it would be the same)
So we should change all the implementation, documentation and tests to use it.
I skipped:
* `src/tools` - Those are copied in from upstream
* `src/test/ui` - Hard to tell if `vec![].into_iter` was used intentionally or not here and not much benefit to changing it.
* any case where `vec![].into_iter` was used because we specifically needed a `Vec::IntoIter<T>`
* any case where it looked like we were intentionally using `vec![].into_iter` to test it.
rustdoc: Remove the intra-doc links side channel
The side channel made the code much more complex and harder to
understand. It was added as a temporary workaround in
0c99d806ea, but it's no longer necessary.
The addition of `UrlFragment` in #92088 was the key to getting rid of
the side channel. The semantic information (rather than the strings that
used to be used for fragments) that is now captured by `UrlFragment` is
enough to obviate the side channel. An additional change had to be made
to `UrlFragment` in this PR to make this possible: it now records
`DefId`s rather than item names.
This PR also consolidates the checks for anchor conflicts into one place.
r? `@Manishearth`
Release notes: add `Result::unwrap_{,err_}unchecked`
They were stabilized together with `Option::unwrap_unchecked`
in https://github.com/rust-lang/rust/issues/81383.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Normalize generator-local types with unevaluated constants
Normalize generator-interior types in addition to (i.e. instead of just) erasing regions, since sometimes we collect types with unevaluated const exprs.
Fixes#84737Fixes#88171Fixes#92091Fixes#92634
Probably also fixes#73114, but that one has no code I could test. It looks like it's the same issue, though.
Normalize struct tail type when checking Pointee trait
Let's go ahead and implement the FIXMEs by properly normalizing the struct-tail type when satisfying a Pointee obligation. This should fix the ICE when we try to calculate a layout depending on `<Ty as Pointee>::Metadata` later.
Fixes#92128Fixes#92577
Additionally, mark the obligation as ambiguous if there are any infer types in that struct-tail type. This has the effect of causing `<_ as Pointee>::Metadata` to be properly replaced with an infer variable ([here](https://github.com/rust-lang/rust/blob/master/compiler/rustc_trait_selection/src/traits/project.rs#L813)) and registered as an obligation... this turns out to be very important in unifying function parameters with formals that are assoc types.
Fixes#91446
Ensure that `Fingerprint` caching respects hashing configuration
Fixes#92266
In some `HashStable` impls, we use a cache to avoid re-computing
the same `Fingerprint` from the same structure (e.g. an `AdtDef`).
However, the `StableHashingContext` used can be configured to
perform hashing in different ways (e.g. skipping `Span`s). This
configuration information is not included in the cache key,
which will cause an incorrect `Fingerprint` to be used if
we hash the same structure with different `StableHashingContext`
settings.
To fix this, the configuration settings of `StableHashingContext`
are split out into a separate `HashingControls` struct. This
struct is used as part of the cache key, ensuring that our caches
always produce the correct result for the given settings.
With this in place, we now turn off `Span` hashing during the
entire process of computing the hash included in legacy symbols.
This current has no effect, but will matter when a future PR
starts hashing more `Span`s that we currently skip.
Mak DefId to AccessLevel map in resolve for export
hir_id to accesslevel in resolve and applied in privacy
using local def id
removing tracing probes
making function not recursive and adding comments
Move most of Exported/Public res to rustc_resolve
moving public/export res to resolve
fix missing stability attributes in core, std and alloc
move code to access_levels.rs
return for some kinds instead of going through them
Export correctness, macro changes, comments
add comment for import binding
add comment for import binding
renmae to access level visitor, remove comments, move fn as closure, remove new_key
fmt
fix rebase
fix rebase
fmt
fmt
fix: move macro def to rustc_resolve
fix: reachable AccessLevel for enum variants
fmt
fix: missing stability attributes for other architectures
allow unreachable pub in rustfmt
fix: missing impl access level + renaming export to reexport
Missing impl access level was found thanks to a test in clippy
Hash `Ident` spans in all HIR structures
This PR removes all of the `#[stable_hasher(project(name))]`
attributes used in HIR structs. While these attributes are not known
to be causing any issues in practice, we need to hash these in
order for the incremental system to work correctly -
a query could be otherwise be incorrectly marked green
when a change occures in one of the `Span`s that it uses.
Make `Atomic*::from_mut` return `&mut Atomic*`
```rust
impl Atomic* {
pub fn from_mut(v: &mut bool) -> &mut Self;
// ^^^^---- previously was just a &
}
```
This PR makes `from_mut` atomic methods tracked in #76314 return unique references to atomic types, instead of shared ones. This makes `from_mut` and `get_mut` inverses of each other, allowing to undo either of them by the other.
r? `@RalfJung`
(as Ralf was [concerned](https://github.com/rust-lang/rust/issues/76314#issuecomment-955062593) about this)
Implemented const casts of raw pointers
This adds `as_mut()` method for `*const T` and `as_const()` for `*mut T`
which are intended to make casting of consts safer. This was discussed
in the [internals discussion][discussion].
Given that this is a simple change and multiple people agreed to it including `@RalfJung` I decided to go ahead and open the PR.
[discussion]: https://internals.rust-lang.org/t/casting-constness-can-be-risky-heres-a-simple-fix/15933
rustdoc: Introduce a resolver cache for sharing data between early doc link resolution and later passes
The refactoring parts of https://github.com/rust-lang/rust/pull/88679, shouldn't cause any slowdowns.
r? `@jyn514`
expand: Refactor InvocationCollector visitor for better code reuse
The refactoring part of https://github.com/rust-lang/rust/pull/92473.
Invocation collector visitor logic now lives in two main functions:
- `fn flat_map_node`, corresponding to "one to many" expansions
- `fn visit_node`, corresponding to "one to one" expansions
All specific mut visitor methods now use one of these functions.
The new `InvocationCollectorNode` trait implemented for all `AstFragment` nodes provides the necessary small pieces of functionality required to implement the `(flat_map,visit)_node` functions.
r? `@Aaron1011`
Don't resolve blocks in foreign functions
Although it is an error for a foreign function to have a block, it is still possible at the level of the AST. #74204 made AST lowering skip over blocks belonging to foreign functions, since they're invalid. However, resolve still treated these blocks normally, resulting in a mismatch between the HIR and resolve, which could cause an ICE under certain circumstances. This PR changes resolve to skip over blocks belonging to foreign functions, as AST lowering does.
Fixes#91370.
r? ``@cjgillot``
rustc_metadata: Optimize and document module children decoding
The first commit limits the item in the `item_children`/`each_child_of_item` query to modules (in name resolution sense) and adds a corresponding assertion.
The `associated_item_def_ids` query collecting children of traits and impls specifically now uses a simplified implementation not decoding unnecessary data instead of `each_child_of_item`, this gives a nice performance improvement.
The second commit does some renaming that clarifies the terminology used for all items in a module vs `use` items only.
Don't perform any new queries while reading a query result on disk
In addition to being very confusing, this can cause us to add dep node edges between two queries that would not otherwise have an edge.
We now panic if any new dep node edges are created during the deserialization of a query result. This requires serializing the full `AdtDef` to disk, instead of just serializing the `DefId` and invoking the `adt_def` query during deserialization.
I'll probably split this up into several smaller PRs for perf runs.
Add a query for resolving an impl item from the trait item
This makes finding the item in an impl that implements a given trait item a query. This is for a few reasons:
- To slightly improve performance
- To avoid having to do name resolution during monomorphisation
- To make it easier to implement potential future features that create anonymous associated items
rustdoc: Remove apparently unnecessary conditional in `doc_value`
I need to remove this conditional for #91072, but while it seems
unnecessary, we are not certain. So, the plan is to first remove the
conditional and see if any regressions pop up before doing the refactor.
This way, it will be easier to revert if there are subtle regressions.
r? `@jyn514`
Rollup of 8 pull requests
Successful merges:
- #84640 (Implement `TryFrom<char>` for `u8`)
- #92336 (Remove &self from PrintState::to_string)
- #92375 (Consolidate checking for msvc when generating debuginfo)
- #92568 (Add note about non_exhaustive to variant_count)
- #92600 (Add some missing `#[must_use]` to some `f{32,64}` operations)
- #92610 (Create CSS class instead of using inline style for search results)
- #92632 (Implement stabilization of `#[feature(available_parallelism)]`)
- #92650 (Fix typo in `StableCrateId` docs)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
