To fix#8106, we need an LLVM version that contains r211082 aka 0dee6756
which fixes a bug that blocks that issue.
There have been some tiny API changes in LLVM, and cmpxchg changed its
return type. The i1 part of the new return type is only interesting when
using the new weak cmpxchg, which we don't do.
When calling a foreign function, some arguments and/or return value
attributes are required to conform to the foreign ABI. Currently those
attributes are only added to the declaration of foreign functions. With
direct calls, this is no problem, because LLVM can see that those
attributes apply to the call. But with an indirect call, LLVM cannot do
that and the attribute is missing.
To fix that, we have to add those attribute to the calls to foreign
functions as well.
This also allows to remove the special handling of the SRet attribute,
which is ABI-dependent and will be set via the `attr` field of the
return type's `ArgType`.
The ArgType type gives us a generic way to specify an attribute for a
type to ensure ABI conformance for foreign functions. But the code that
actually sets the argument attributes in the function declaration
only sets the attribute for the return type when the type is indirect.
Since LLVMAddAttribute() doesn't allow to set attributes on the return
type, we have to use LLVMAddFunctionAttribute() instead.
This didn't cause problems yet, because currently only some indirect
types require attributes to be set.
This commit makes several changes to the stability index infrastructure:
* Stability levels are now inherited lexically, i.e., each item's
stability level becomes the default for any nested items.
* The computed stability level for an item is stored as part of the
metadata. When using an item from an external crate, this data is
looked up and cached.
* The stability lint works from the computed stability level, rather
than manual stability attribute annotations. However, the lint still
checks only a limited set of item uses (e.g., it does not check every
component of a path on import). This will be addressed in a later PR,
as part of issue #8962.
* The stability lint only applies to items originating from external
crates, since the stability index is intended as a promise to
downstream crates.
* The "experimental" lint is now _allow_ by default. This is because
almost all existing crates have been marked "experimental", pending
library stabilization. With inheritance in place, this would generate
a massive explosion of warnings for every Rust program.
The lint should be changed back to deny-by-default after library
stabilization is complete.
* The "deprecated" lint still warns by default.
The net result: we can begin tracking stability index for the standard
libraries as we stabilize, without impacting most clients.
Closes#13540.
This PR is changing the error messages for non-exhaustive pattern matching to include a more accurate witness, i.e. a pattern that is not covered by any of the ones provided by the user. Example:
```rust
fn main() {
match (true, (Some("foo"), [true, true]), Some(42u)) {
(false, _, _) => (),
(true, (None, [true, _]), None) => (),
(true, (None, [false, _]), Some(1u)) => ()
}
}
```
```sh
/tmp/witness.rs:2:2: 6:3 error: non-exhaustive patterns: (true, (core::option::Some(_), _), _) not covered
/tmp/witness.rs:2 match (true, (Some("foo"), [true, true]), Some(42u)) {
/tmp/witness.rs:3 (false, _, _) => (),
/tmp/witness.rs:4 (true, (None, [true, _]), None) => (),
/tmp/witness.rs:5 (true, (None, [false, _]), Some(1u)) => ()
/tmp/witness.rs:6 }
```
As part of that, I refactored some of the relevant code and carried over the changes to fixed vectors from the previous PR.
I'm putting it out there for now but the tests will be red.
Closes#8142.
This is not the semantics we want long-term. You can continue to use
`#[unsafe_destructor]`, but you'll need to add
`#![feature(unsafe_destructor)]` to the crate attributes.
[breaking-change]
r? @alexcrichton
Closes#8142.
This is not the semantics we want long-term. You can continue to use
`#[unsafe_destructor]`, but you'll need to add
`#![feature(unsafe_destructor)]` to the crate attributes.
[breaking-change]
The parser already has special logic for parsing `>` tokens from `>>`, and this
commit extends the logic to the acquiring a `>` from the `>=` and `>>=` tokens
as well.
Closes#15043
The parser already has special logic for parsing `>` tokens from `>>`, and this
commit extends the logic to the acquiring a `>` from the `>=` and `>>=` tokens
as well.
Closes#15043
The struct and module doc comments are reformulated. The `execute`
method's documentation are put up to date, and failure information
is added. A test is also added to address the possible failure.
```test_harness
#[test]
fn foo() {}
```
will now compile and run the tests, rather than just ignoring & stripping them (i.e. it is as if `--test` was passed).
Also, the specific example in https://github.com/rust-lang/rust/issues/12242 was fixed (but that issue is broader than that example).
rustdoc now supports compiling things with `--test` so the examples in
this guide can be compiled & tested properly (revealing a few issues &
out-dated behaviours).
Also, reword an example to be clearer, cc #12242.
Continuing from #15012, this makes four changes to the `rustdoc` static files.
- Change the placeholder text of the search bar to `Click or press 'S' to search, '?' for more options...` to make keyboard hotkeys more apparent (capitalizing the `S` to match the help text).
- Change the `main.js` file to use browser-normalized key codes (`e.which`, from `jQuery`), instead of `e.keyCode`.
- Change the key code for `?` to be the correct `191` instead of `188`, so that the hotkey works to bring up search information.
- Change the search information to display `tab` and `shift+tab` instead of `up` and `down`, as those do not yet work outside of Firefox (see #15011). Also, adjust the height so it does not cut off the help text.
<s>I've also opened up #15038 about the non-functional `up` and `down` functionality, although this does nothing to fix it.</s>
This test was added long time ago and marked as ignored.
The same test was added later in #8485 as run-fail/issue-3907.rs,
but the old one was not deleted.
Updated search bar to match help text.
Used correct, normalized hotkeys in search.
Updated shortcut menu with working shortcuts (tabs).
Changed height of search help.
This adds the `test_harness` directive that runs a code block using the
test runner, to allow for `#[test]` items to be demonstrated and still
tested (currently they are just stripped and not even compiled, let
alone run).
This commit makes several changes to the stability index infrastructure:
* Stability levels are now inherited lexically, i.e., each item's
stability level becomes the default for any nested items.
* The computed stability level for an item is stored as part of the
metadata. When using an item from an external crate, this data is
looked up and cached.
* The stability lint works from the computed stability level, rather
than manual stability attribute annotations. However, the lint still
checks only a limited set of item uses (e.g., it does not check every
component of a path on import). This will be addressed in a later PR,
as part of issue #8962.
* The stability lint only applies to items originating from external
crates, since the stability index is intended as a promise to
downstream crates.
* The "experimental" lint is now _allow_ by default. This is because
almost all existing crates have been marked "experimental", pending
library stabilization. With inheritance in place, this would generate
a massive explosion of warnings for every Rust program.
The lint should be changed back to deny-by-default after library
stabilization is complete.
* The "deprecated" lint still warns by default.
The net result: we can begin tracking stability index for the standard
libraries as we stabilize, without impacting most clients.
Closes#13540.
The lexer already ignores CRLF in between tokens, but it doesn't
properly handle carriage returns inside strings and doc comments. Teach
it to treat CRLF as LF inside these tokens, and to disallow carriage
returns that are not followed by linefeeds. This includes handling an
escaped CRLF inside a regular string token the same way it handles an
escaped LF.
This is technically a breaking change, as bare carriage returns are no
longer allowed, and CRLF sequences are now treated as LF inside strings
and doc comments, but it's very unlikely to actually affect any
real-world code.
This change is necessary to have Rust code compile on Windows the same
way it does on Unix. The mozilla/rust repository explicitly sets eol=lf
for Rust source files, but other Rust repositories don't. Notably,
rust-http cannot be compiled on Windows without converting the CRLF line
endings back to LF.
[breaking-change]
The lexer already ignores CRLF in between tokens, but it doesn't
properly handle carriage returns inside strings and doc comments. Teach
it to treat CRLF as LF inside these tokens, and to disallow carriage
returns that are not followed by linefeeds. This includes handling an
escaped CRLF inside a regular string token the same way it handles an
escaped LF.
This is technically a breaking change, as bare carriage returns are no
longer allowed, and CRLF sequences are now treated as LF inside strings
and doc comments, but it's very unlikely to actually affect any
real-world code.
This change is necessary to have Rust code compile on Windows the same
way it does on Unix. The mozilla/rust repository explicitly sets eol=lf
for Rust source files, but other Rust repositories don't. Notably,
rust-http cannot be compiled on Windows without converting the CRLF line
endings back to LF.
[breaking-change]
This creates a stability baseline for all crates that we distribute that are not `std`. In general, all library code must start as experimental and progress in stages to become stable.
Closes#14480 (vim: Add :RustRun and associated commands)
Closes#14917 (Deprecate free-standing endian conversions in favor of methods on Int. Merge Bitwise into Int and add more bit operations.)
Closes#14981 (librustc: Use expr_ty_adjusted in trans_overloaded_call.)
Closes#14989 (std::task - Revamp TaskBuilder API)
Closes#14997 (Reject double moves out of array elements)
Closes#14998 (Vim: highlight escapes for byte literals.)
Closes#15002 (Fix FIXME #5275)
Closes#15004 (Fix#14865)
Closes#15007 (debuginfo: Add test case for issue #14411.)
Closes#15012 ((doc) Change search placeholder text.)
Closes#15013 (Update compiler-rt.)
Closes#15017 (Deprecate the bytes!() macro.)
Replace its usage with byte string literals, except in `bytes!()` tests.
Also add a new snapshot, to be able to use the new b"foo" syntax.
The src/etc/2014-06-rewrite-bytes-macros.py script automatically
rewrites `bytes!()` invocations into byte string literals.
Pass it filenames as arguments to generate a diff that you can inspect,
or `--apply` followed by filenames to apply the changes in place.
Diffs can be piped into `tip` or `pygmentize -l diff` for coloring.
