Remove incorrect transformation from RemoveZsts
Partial removal of storage statements for a local is incorrect, so a decision to optimize cannot be make independently for each statement.
Avoid the issue by performing the transformation completely or not at all.
This method is trying to detect macro invocations, so that it can split a span
into two parts just after the `!` of the invocation.
Under some circumstances (probably involving nested macros), it gets confused
and produces a span that is larger than the original span, and possibly extends
outside its enclosing function and even into an adjacent file.
In extreme cases, that can result in malformed coverage mappings that cause
`llvm-cov` to fail. For now, we at least want to detect these egregious cases
and avoid them, so that coverage reports can still be produced.
Partial removal of storage statements for a local is incorrect, so a
decision to optimize cannot be make independently for each statement.
Avoid the issue by performing the transformation completely or not at
all.
generator layout: ignore fake borrows
fixes#117059
We emit fake shallow borrows in case the scrutinee place uses a `Deref` and there is a match guard. This is necessary to prevent the match guard from mutating the scrutinee: fab1054e17/compiler/rustc_mir_build/src/build/matches/mod.rs (L1250-L1265)
These fake borrows end up impacting the generator witness computation in `mir_generator_witnesses`, which causes the issue in #117059. This PR now completely ignores fake borrows during this computation. This is sound as thse are always removed after analysis and the actual computation of the generator layout happens afterwards.
Only the second commit impacts behavior, and could be backported by itself.
r? types
Update the alignment checks to match rust-lang/reference#1387
Previously, we had a special case to not check `Rvalue::AddressOf` in this pass because we weren't quite sure if pointers needed to be aligned in the Place passed to it: https://github.com/rust-lang/rust/pull/112026
Since https://github.com/rust-lang/reference/pull/1387 merged, this PR updates this pass to match. The behavior of the check is nearly unchanged, except we also avoid inserting a check for creating references. Most of the changes in this PR are cleanup and new tests.
Support enum variants in offset_of!
This MR implements support for navigating through enum variants in `offset_of!`, placing the enum variant name in the second argument to `offset_of!`. The RFC placed it in the first argument, but I think it interacts better with nested field access in the second, as you can then write things like
```rust
offset_of!(Type, field.Variant.field)
```
Alternatively, a syntactic distinction could be made between variants and fields (e.g. `field::Variant.field`) but I'm not convinced this would be helpful.
[RFC 3308 # Enum Support](https://rust-lang.github.io/rfcs/3308-offset_of.html#enum-support-offset_ofsomeenumstructvariant-field_on_variant)
Tracking Issue #106655.
Replace switch to unreachable by assume statements
`UnreachablePropagation` currently keeps some switch terminators alive in order to ensure codegen can infer the inequalities on the discriminants.
This PR proposes to encode those inequalities as `Assume` statements.
This allows to simplify MIR further by removing some useless terminators.
Historically, these errors existed so that the coverage debug code could dump
additional information before reporting a compiler bug. That debug code was
removed by #115962, so we can now simplify these methods by making them panic
when they detect a bug.
Enable cross-crate-inlining when MIR inlining is enabled
This would make https://github.com/rust-lang/rust/issues/117355 generally less obscure, and also seems like a good idea, even if for some reason someone wants MIR opts but no codegen opts.
- Sort dependencies and features sections.
- Add `tidy` markers to the sorted sections so they stay sorted.
- Remove empty `[lib`] sections.
- Remove "See more keys..." comments.
Excluded files:
- rustc_codegen_{cranelift,gcc}, because they're external.
- rustc_lexer, because it has external use.
- stable_mir, because it has external use.
See through aggregates in GVN
This PR is extracted from https://github.com/rust-lang/rust/pull/111344
The first 2 commit are cleanups to avoid repeated work. I propose to stop removing useless assignments as part of this pass, and let a later `SimplifyLocals` do it. This makes tests easier to read (among others).
The next 3 commits add a constant folding mechanism to the GVN pass, presented in https://github.com/rust-lang/rust/pull/116012. ~This pass is designed to only use global allocations, to avoid any risk of accidental modification of the stored state.~
The following commits implement opportunistic simplifications, in particular:
- projections of aggregates: `MyStruct { x: a }.x` gets replaced by `a`, works with enums too;
- projections of arrays: `[a, b][0]` becomes `a`;
- projections of repeat expressions: `[a; N][x]` becomes `a`;
- transform arrays of equal operands into a repeat rvalue.
Fixes https://github.com/rust-lang/miri/issues/3090
r? `@oli-obk`
Rollup of 5 pull requests
Successful merges:
- #115773 (tvOS simulator support on Apple Silicon for rustc)
- #117162 (Remove `cfg_match` from the prelude)
- #117311 (-Zunpretty help: add missing possible values)
- #117316 (Mark constructor of `BinaryHeap` as const fn)
- #117319 (explain why we don't inline when target features differ)
r? `@ghost`
`@rustbot` modify labels: rollup
Implement `gen` blocks in the 2024 edition
Coroutines tracking issue https://github.com/rust-lang/rust/issues/43122
`gen` block tracking issue https://github.com/rust-lang/rust/issues/117078
This PR implements `gen` blocks that implement `Iterator`. Most of the logic with `async` blocks is shared, and thus I renamed various types that were referring to `async` specifically.
An example usage of `gen` blocks is
```rust
fn foo() -> impl Iterator<Item = i32> {
gen {
yield 42;
for i in 5..18 {
if i.is_even() { continue }
yield i * 2;
}
}
}
```
The limitations (to be resolved) of the implementation are listed in the tracking issue
Only call `mir_const_qualif` if absolutely necessary
Pull the perf change out of https://github.com/rust-lang/rust/pull/113617
This should not have any impact on behaviour (if it does, we'll see an ICE)
Require target features to match exactly during inlining
In general it is not correct to inline a callee with a target features
that are subset of the callee. Require target features to match exactly
during inlining.
The exact match could be potentially relaxed, but this would require
identifying specific feature that are allowed to differ, those that need
to match, and those that can be present in caller but not in callee.
This resolves MIR part of #116573. For other concerns with respect to
the previous implementation also see areInlineCompatible in LLVM.
In general it is not correct to inline a callee with a target features
that are subset of the callee. Require target features to match exactly
during inlining.
The exact match could be potentially relaxed, but this would require
identifying specific feature that are allowed to differ, those that need
to match, and those that can be present in caller but not in callee.
This resolves MIR part of #116573. For other concerns with respect to
the previous implementation also see areInlineCompatible in LLVM.
Separate move path tracking between borrowck and drop elaboration.
The primary goal of this PR is to skip creating a `MovePathIndex` for path that do not need dropping in drop elaboration.
The 2 first commits are cleanups.
The next 2 commits displace `move` errors from move-path builder to borrowck. Move-path builder keeps the same logic, but does not carry error information any more.
The remaining commits allow to filter `MovePathIndex` creation according to types. This is used in drop elaboration, to avoid computing dataflow for paths that do not need dropping.
Implement jump threading MIR opt
This pass is an attempt to generalize `ConstGoto` and `SeparateConstSwitch` passes into a more complete jump threading pass.
This pass is rather heavy, as it performs a truncated backwards DFS on MIR starting from each `SwitchInt` terminator. This backwards DFS remains very limited, as it only walks through `Goto` terminators.
It is build to support constants and discriminants, and a propagating through a very limited set of operations.
The pass successfully manages to disentangle the `Some(x?)` use case and the DFA use case. It still needs a few tests before being ready.
coverage: Fix inconsistent handling of function signature spans
While doing some more cleanup of `spans`, I noticed a strange inconsistency in how function signatures are handled. Normally the function signature span is treated as though it were executable as part of the start of the function, but in some cases the signature span disappears entirely from coverage, for no obvious reason.
This is caused by the fact that spans created by `CoverageSpan::for_fn_sig` don't add the span to their `merged_spans` field (unlike normal statement/terminator spans). In cases where the span-processing code looks at those merged spans, it thinks the signature span is no longer visible and deletes it.
Adding the signature span to `merged_spans` resolves the inconsistency.
(Prior to #116409 this wouldn't have been possible, because there was no case in the old `CoverageStatement` enum representing a signature. Now that `merged_spans` is just a list of spans, that's no longer an obstacle.)
Implement rustc part of RFC 3127 trim-paths
This PR implements (or at least tries to) [RFC 3127 trim-paths](https://github.com/rust-lang/rust/issues/111540), the rustc part. That is `-Zremap-path-scope` with all of it's components/scopes.
`@rustbot` label: +F-trim-paths
Even though expression details are now stored in the info structure, we still
need to inject `ExpressionUsed` statements into MIR, because if one is missing
during codegen then we know that it was optimized out and we can remap all of
its associated code regions to zero.
Previously, mappings were attached to individual coverage statements in MIR.
That necessitated special handling in MIR optimizations to avoid deleting those
statements, since otherwise codegen would be unable to reassemble the original
list of mappings.
With this change, a function's list of mappings is now attached to its MIR
body, and survives intact even if individual statements are deleted by
optimizations.
Coverage codegen can now allocate arrays based on the number of
counters/expressions originally used by the instrumentor.
The existing query that inspects coverage statements is still used for
determining the number of counters passed to `llvm.instrprof.increment`. If
some high-numbered counters were removed by MIR optimizations, the instrumented
binary can potentially use less memory and disk space at runtime.
This allows coverage information to be attached to the function as a whole when
appropriate, instead of being smuggled through coverage statements in the
function's basic blocks.
As an example, this patch moves the `function_source_hash` value out of
individual `CoverageKind::Counter` statements and into the per-function info.
When synthesizing unused functions for coverage purposes, the absence of this
info is taken to indicate that a function was not eligible for coverage and
should not be synthesized.
Interacting with `basic_coverage_blocks` directly makes it easier to satisfy
the borrow checker when mutating `pending_dups` while reading other fields.
Format all the let-chains in compiler crates
Since rust-lang/rustfmt#5910 has landed, soon we will have support for formatting let-chains (as soon as rustfmt syncs and beta gets bumped).
This PR applies the changes [from master rustfmt to rust-lang/rust eagerly](https://rust-lang.zulipchat.com/#narrow/stream/122651-general/topic/out.20formatting.20of.20prs/near/374997516), so that the next beta bump does not have to deal with a 200+ file diff and can remain concerned with other things like `cfg(bootstrap)` -- #113637 was a pain to land, for example, because of let-else.
I will also add this commit to the ignore list after it has landed.
The commands that were run -- I'm not great at bash-foo, but this applies rustfmt to every compiler crate, and then reverts the two crates that should probably be formatted out-of-tree.
```
~/rustfmt $ ls -1d ~/rust/compiler/* | xargs -I@ cargo run --bin rustfmt -- `@/src/lib.rs` --config-path ~/rust --edition=2021 # format all of the compiler crates
~/rust $ git checkout HEAD -- compiler/rustc_codegen_{gcc,cranelift} # revert changes to cg-gcc and cg-clif
```
cc `@rust-lang/rustfmt`
r? `@WaffleLapkin` or `@Nilstrieb` who said they may be able to review this purely mechanical PR :>
cc `@Mark-Simulacrum` and `@petrochenkov,` who had some thoughts on the order of operations with big formatting changes in https://github.com/rust-lang/rust/pull/95262#issue-1178993801. I think the situation has changed since then, given that let-chains support exists on master rustfmt now, and I'm fairly confident that this formatting PR should land even if *bootstrap* rustfmt doesn't yet format let-chains in order to lessen the burden of the next beta bump.
const-eval: make misalignment a hard error
It's been a future-incompat error (showing up in cargo's reports) since https://github.com/rust-lang/rust/pull/104616, Rust 1.68, released in March. That should be long enough.
The question for the lang team is simply -- should we move ahead with this, making const-eval alignment failures a hard error? (It turns out some of them accidentally already were hard errors since #104616. But not all so this is still a breaking change. Crater found no regression.)
Having to keep passing in a graph reference was a holdover from when the graph
was partly mutated during traversal. As of #114354 that is no longer necessary,
so we can simplify the traversal code by storing a graph reference as a field
in `TraverseCoverageGraphWithLoops`.
The previous code was storing the worklist in a vector, and then selectively
adding items to the start or end of the vector. That's a perfect use-case for a
double-ended queue.
This change also reveals that the existing code was a bit confused about which
end of the worklist is the front or back. For now, items are always removed
from the front of the queue (instead of the back), and code that adds items to
the queue has been flipped, to preserve the existing behaviour.
Do not check for impossible predicates in const-prop lint.
The enclosing query already checks for them, and replaces the body with a single `unreachable` if they are indeed impossible.
Also consider call and yield as MIR SSA.
The SSA analysis on MIR only considered `Assign` statements as defining a SSA local.
This PR adds assignments as part of a `Call` or `Yield` terminator in that category.
This mainly allows to perform CopyProp on a call return place.
The only subtlety is in the dominance property: the assignment is only complete at the beginning of the target block.
coverage: Unbox and simplify `bcb_filtered_successors`
This is a small cleanup in the coverage instrumentor's graph-building code.
---
This function already has access to the MIR body, so instead of taking a reference to a terminator, it's simpler and easier to pass in a basic block index.
There is no need to box the returned iterator if we instead add appropriate lifetime captures, and make `short_circuit_preorder` generic over the type of iterator it expects.
We can also greatly simplify the function's implementation by observing that the only difference between its two cases is whether we take all of a BB's successors, or just the first one.
---
`@rustbot` label +A-code-coverage
This function already has access to the MIR body, so instead of taking a
reference to a terminator, it's simpler and easier to pass in a basic block
index.
There is no need to box the returned iterator if we instead add appropriate
lifetime captures, since `short_circuit_preorder` is now generic over the type
of iterator it expects.
We can also greatly simplify the function's implementation by observing that
the only difference between its two cases is whether we take all of a BB's
successors, or just the first one.
This enum was mainly needed to track the precise origin of a span in MIR, for
debug printing purposes. Since the old debug code was removed in #115962, we
can replace it with just the span itself.
Generalize small dominators optimization
* Use small dominators optimization from 640ede7b0a more generally.
* Merge `DefLocation` and `LocationExtended` since they serve the same purpose.
coverage: Allow each coverage statement to have multiple code regions
The original implementation of coverage instrumentation was built around the assumption that a coverage counter/expression would be associated with *up to one* code region. When it was discovered that *multiple* regions would sometimes need to share a counter, a workaround was found: for the remaining regions, the instrumentor would create a fresh expression that adds zero to the existing counter/expression.
That got the job done, but resulted in some awkward code, and produces unnecessarily complicated coverage maps in the final binary.
---
This PR removes that tension by changing `StatementKind::Coverage`'s code region field from `Option<CodeRegion>` to `Vec<CodeRegion>`.
The changes on the codegen side are fairly straightforward. As long as each `CoverageKind::Counter` only injects one `llvm.instrprof.increment`, the rest of coverage codegen is happy to handle multiple regions mapped to the same counter/expression, with only minor option-to-vec adjustments.
On the instrumentor/mir-transform side, we can get rid of the code that creates extra (x + 0) expressions. Instead we gather all of the code regions associated with a single BCB, and inject them all into one coverage statement.
---
There are several patches here but they can be divided in to three phases:
- Preparatory work
- Actually switching over to multiple regions per coverage statement
- Cleaning up
So viewing the patches individually may be easier.
When these methods were originally written, I wasn't aware that
`newtype_index!` already supports addition with ordinary numbers, without
needing to unwrap and re-wrap.
If a BCB has more than one code region, those extra regions can now all be
stored in the same coverage statement, instead of being stored in additional
statements.
The concrete type `CoverageSpan` is no longer used outside of the `spans`
module.
This is a separate patch to avoid noise in the preceding patch that actually
encapsulates coverage spans.
By encapsulating the coverage spans in a struct, we can change the internal
representation without disturbing existing call sites. This will be useful for
grouping coverage spans by BCB.
This patch includes some changes that were originally in #115912, which avoid
the need for a particular test to deal with coverage spans at all.
(Comments/logs referring to `CoverageSpan` are updated in a subsequent patch.)
Reveal opaque types before drop elaboration
fixes https://github.com/rust-lang/rust/issues/113594
r? `@cjgillot`
cc `@JakobDegen`
This pass was introduced in https://github.com/rust-lang/rust/pull/110714
I moved it before drop elaboration (which only cares about the hidden types of things, not the opaque TAIT or RPIT type) and set it to run unconditionally (instead of depending on the optimization level and whether the inliner is active)
Implement a global value numbering MIR optimization
The aim of this pass is to avoid repeated computations by reusing past assignments. It is based on an analysis of SSA locals, in order to perform a restricted form of common subexpression elimination.
By opportunity, this pass allows for some simplifications by combining assignments. For instance, this pass could be able to see through projections of aggregates to directly reuse the aggregate field (not in this PR).
We handle references by assigning a different "provenance" index to each `Ref`/`AddressOf` rvalue. This ensure that we do not spuriously merge borrows that should not be merged. Meanwhile, we consider all the derefs of an immutable reference to a freeze type to give the same value:
```rust
_a = *_b // _b is &Freeze
_c = *_b // replaced by _c = _a
```
Skip MIR pass `UnreachablePropagation` when coverage is enabled
When coverage instrumentation and MIR opts are both enabled, coverage relies on two assumptions:
- MIR opts that would delete `StatementKind::Coverage` statements instead move them into bb0 and change them to `CoverageKind::Unreachable`.
- MIR opts won't delete all `CoverageKind::Counter` statements from an instrumented function.
Most MIR opts naturally satisfy the second assumption, because they won't remove coverage statements from bb0, but `UnreachablePropagation` can do so if it finds that bb0 is unreachable. If this happens, LLVM thinks the function isn't instrumented, and it vanishes from coverage reports.
A proper solution won't be possible until after per-function coverage info lands in #116046, but for now we can avoid the problem by turning off this particular pass when coverage instrumentation is enabled.
---
cc `@cjgillot` since I found this while investigating coverage problems encountered by #113970
`@rustbot` label +A-code-coverage +A-mir-opt
subst -> instantiate
continues #110793, there are still quite a few uses of `subst` and `substitute`, but changing them all in the same PR was a bit too much, so I've stopped here for now.
When coverage instrumentation and MIR opts are both enabled, coverage relies on
two assumptions:
- MIR opts that would delete `StatementKind::Coverage` statements instead move
them into bb0 and change them to `CoverageKind::Unreachable`.
- MIR opts won't delete all `CoverageKind::Counter` statements from an
instrumented function.
Most MIR opts naturally satisfy the second assumption, because they won't
remove coverage statements from bb0, but `UnreachablePropagation` can do so if
it finds that bb0 is unreachable. If this happens, LLVM thinks the function
isn't instrumented, and it vanishes from coverage reports.
A proper solution won't be possible until after per-function coverage info
lands in #116046, but for now we can avoid the problem by turning off this
particular pass when coverage instrumentation is enabled.
interpret: more consistently use ImmTy in operators and casts
The diff in src/tools/miri/src/shims/x86/sse2.rs should hopefully suffice to explain why this is nicer. :)
rename mir::Constant -> mir::ConstOperand, mir::ConstKind -> mir::Const
Also, be more consistent with the `to/eval_bits` methods... we had some that take a type and some that take a size, and then sometimes the one that takes a type is called `bits_for_ty`.
Turns out that `ty::Const`/`mir::ConstKind` carry their type with them, so we don't need to even pass the type to those `eval_bits` functions at all.
However this is not properly consistent yet: in `ty` we have most of the methods on `ty::Const`, but in `mir` we have them on `mir::ConstKind`. And indeed those two types are the ones that correspond to each other. So `mir::ConstantKind` should actually be renamed to `mir::Const`. But what to do with `mir::Constant`? It carries around a span, that's really more like a constant operand that appears as a MIR operand... it's more suited for `syntax.rs` than `consts.rs`, but the bigger question is, which name should it get if we want to align the `mir` and `ty` types? `ConstOperand`? `ConstOp`? `Literal`? It's not a literal but it has a field called `literal` so it would at least be consistently wrong-ish...
``@oli-obk`` any ideas?
coverage: Fix an unstable-sort inconsistency in coverage spans
This code was calling `sort_unstable_by`, but failed to impose a total order on the initial spans. That resulted in unpredictable handling of closure spans, producing inconsistencies in the coverage maps and in user-visible coverage reports.
This PR fixes the problem by always sorting closure spans before otherwise-identical non-closure spans, and also switches to a stable sort in case the ordering is still not total.
---
In addition to the fix itself, this PR also contains a cleanup to the comparison function that I was working on when I discovered the bug.
This code was calling `sort_unstable_by`, but failed to impose a total order on
the initial spans. That resulted in unpredictable handling of closure spans,
producing inconsistencies in the coverage maps and in user-visible coverage
reports.
This patch fixes the problem by always sorting closure spans before
otherwise-identical non-closure spans, and also switches to a stable sort in
case the ordering is still not total.
treat host effect params as erased in codegen
This fixes the changes brought to codegen tests when effect params are added to libcore, by not attempting to monomorphize functions that get the host param by being `const fn`.
r? `@oli-obk`
This fixes the changes brought to codegen tests when effect params are
added to libcore, by not attempting to monomorphize functions that get
the host param by being `const fn`.
Rollup of 6 pull requests
Successful merges:
- #115736 (Remove `verbose_generic_activity_with_arg`)
- #115771 (cleanup leftovers of const_err lint)
- #115798 (add helper method for finding the one non-1-ZST field)
- #115812 (Merge settings.css into rustdoc.css)
- #115815 (fix: return early when has tainted in mir pass)
- #115816 (Disabled socketpair for Vita)
r? `@ghost`
`@rustbot` modify labels: rollup
Remove `verbose_generic_activity_with_arg`
This removes `verbose_generic_activity_with_arg` and changes users to `generic_activity_with_arg`. This keeps the output of `-Z time` readable while these repeated events are still available with the self profiling mechanism.
fix: return early when has tainted in mir-lint
Fixes#115203
`a[..]` is of indeterminate size, it had been reported error during borrow check, therefore we skip the mir lint process.
coverage: Simplify the `coverageinfo` query
The `coverageinfo` query walks through a `mir::Body`'s statements to find the total number of coverage counter IDs and coverage expression IDs that have been used, as this information is needed by coverage codegen.
This PR makes 3 nice simplifications to that query:
- Extract a common iterator over coverage statements, shared by both coverage-related queries
- Simplify the query's visitor from two passes to just one pass
- Explicitly track the highest seen IDs in the visitor, and only convert to a count right at the end
I also updated some related comments. Some had been invalidated by these changes, while others had already been invalidated by previous coverage changes.
Don't report any errors in `lower_intrinsics`.
Intrinsics should have been type checked earlier.
This is part of moving all mir-opt diagnostics early enough so that they are reliably emitted even in check builds: https://github.com/rust-lang/rust/issues/49292#issuecomment-1692212095
Both of the coverage queries can now use this one helper function to iterate
over all of the `mir::Coverage` payloads in the statements of a `mir::Body`.
Represent MIR composite debuginfo as projections instead of aggregates
Composite debuginfo for MIR is currently represented as
```
debug name => Type { projection1 => place1, projection2 => place2 };
```
ie. a single `VarDebugInfo` object with that name, and its value a `VarDebugInfoContents::Composite`.
This PR proposes to reverse the representation to be
```
debug name.projection1 => place1;
debug name.projection2 => place2;
```
ie. multiple `VarDebugInfo` objects with each their projection.
This simplifies the handling of composite debuginfo by the compiler by avoiding weird nesting.
Based on https://github.com/rust-lang/rust/pull/115139
Use relative positions inside a SourceFile.
This allows to remove the normalization of start positions for hashing, and simplify allocation of global address space.
cc `@Zoxc`
Rollup of 5 pull requests
Successful merges:
- #115353 (Emit error instead of ICE when optimized MIR is missing)
- #115488 (Take `&mut Results` in `ResultsVisitor`)
- #115492 (Allow `large_assignments` for Box/Arc/Rc initialization)
- #115519 (Don't ICE on associated type projection without feature gate in new solver)
- #115534 (Expose more information with DefId in smir)
r? `@ghost`
`@rustbot` modify labels: rollup
Fix inlining with -Zalways-encode-mir
Only inline functions that are considered eligible for inlining
by the reachability pass.
This constraint was previously indirectly enforced by only exporting MIR
of eligible functions, but that approach doesn't work with
-Zalways-encode-mir enabled.
Only inline functions that are considered eligible for inlining
by the reachability pass.
This constraint was previously indirectly enforced by only exporting MIR
of eligible functions, but that approach doesn't work with
-Zalways-encode-mir enabled.
Don't do intra-pass validation on MIR shims
Fixes#114375
In the test that was committed, we end up generating the drop shim for `struct Foo` that looks like:
```
fn std::ptr::drop_in_place(_1: *mut Foo) -> () {
let mut _0: ();
bb0: {
goto -> bb5;
}
bb1: {
return;
}
bb2 (cleanup): {
resume;
}
bb3: {
goto -> bb1;
}
bb4 (cleanup): {
drop(((*_1).0: foo::WrapperWithDrop<()>)) -> [return: bb2, unwind terminate];
}
bb5: {
drop(((*_1).0: foo::WrapperWithDrop<()>)) -> [return: bb3, unwind: bb2];
}
}
```
In `bb4` and `bb5`, we assert that `(*_1).0` has type `WrapperWithDrop<()>`. However, In a user-facing param env, the type is actually `WrapperWithDrop<Tait>`. These types are not equal in a user-facing param-env (and can't be made equal even if we use `DefiningAnchor::Bubble`, since it's a non-local TAIT).
coverage: Give the instrumentor its own counter type, separate from MIR
Within the MIR representation of coverage data, `CoverageKind` is an important part of `StatementKind::Coverage`, but the `InstrumentCoverage` pass also uses it heavily as an internal data structure. This means that any change to `CoverageKind` also needs to update all of the internal parts of `InstrumentCoverage` that manipulate it directly, making the MIR representation difficult to modify.
---
This change fixes that by giving the instrumentor its own `BcbCounter` type for internal use, which is then converted to a `CoverageKind` when injecting coverage information into MIR.
The main change is mostly mechanical, because the initial `BcbCounter` is drop-in compatible with `CoverageKind`, minus the unnecessary `CoverageKind::Unreachable` variant.
I've then removed the `function_source_hash` field from `BcbCounter::Counter`, as a small example of how the two types can now usefully differ from each other. Every counter in a MIR-level function should have the same source hash, so we can supply the hash during the conversion to `CoverageKind::Counter` instead.
---
*Background:* BCB stands for “basic coverage block”, which is a node in the simplified control-flow graph used by coverage instrumentation. The instrumentor pass uses the function's actual MIR control-flow graph to build a simplified BCB graph, then assigns coverage counters and counter expressions to various nodes/edges in that simplified graph, and then finally injects corresponding coverage information into the underlying MIR.
Add MIR validation for unwind out from nounwind functions + fixes to make validation pass
`@Nilstrieb` This is the MIR validation you asked in https://github.com/rust-lang/rust/pull/112403#discussion_r1222739722.
Two passes need to be fixed to get the validation to pass:
* `RemoveNoopLandingPads` currently unconditionally introduce a resume block (even there is none to begin with!), changed to not do that
* Generator state transform introduces a `assert` which may unwind, and its drop elaboration also introduces many new `UnwindAction`s, so in this case run the AbortUnwindingCalls after the transformation.
I believe this PR should also fixRust-for-Linux/linux#1016, cc `@ojeda`
r? `@Nilstrieb`
This shows one small benefit of separating `BcbCounter` from `CoverageKind`.
The function source hash will be the same for all counters within a function,
so instead of passing it through `CoverageCounters` and storing it in every
counter, we can just supply it during the final conversion to `CoverageKind`.
Otherwise the file name generated for generator_drop will become
core.ptr-drop_in_place.[generator@<FILEPATH>_<NUMBERS>].generator_drop.0.mir
instead of main-{closure#0}.generator_drop.0.mir which breaks a mir-opt
test.
Normalize before checking if local is freeze in `deduced_param_attrs`
Not normalizing the local type eagerly results in possibly exponential amounts of normalization happening downstream in `is_freeze_raw`.
Fixes#113372
Storing coverage counter information in `CoverageCounters` has a few advantages
over storing it directly inside BCB graph nodes:
- The graph doesn't need to be mutable when making the counters, making it
easier to see that the graph itself is not modified during this step.
- All of the counter data is clearly visible in one place.
- It becomes possible to use a representation that doesn't correspond 1:1 to
graph nodes, e.g. storing all the edge counters in a single hashmap instead of
several.
feat: `riscv-interrupt-{m,s}` calling conventions
Similar to prior support added for the mips430, avr, and x86 targets this change implements the rough equivalent of clang's [`__attribute__((interrupt))`][clang-attr] for riscv targets, enabling e.g.
```rust
static mut CNT: usize = 0;
pub extern "riscv-interrupt-m" fn isr_m() {
unsafe {
CNT += 1;
}
}
```
to produce highly effective assembly like:
```asm
pub extern "riscv-interrupt-m" fn isr_m() {
420003a0: 1141 addi sp,sp,-16
unsafe {
CNT += 1;
420003a2: c62a sw a0,12(sp)
420003a4: c42e sw a1,8(sp)
420003a6: 3fc80537 lui a0,0x3fc80
420003aa: 63c52583 lw a1,1596(a0) # 3fc8063c <_ZN12esp_riscv_rt3CNT17hcec3e3a214887d53E.0>
420003ae: 0585 addi a1,a1,1
420003b0: 62b52e23 sw a1,1596(a0)
}
}
420003b4: 4532 lw a0,12(sp)
420003b6: 45a2 lw a1,8(sp)
420003b8: 0141 addi sp,sp,16
420003ba: 30200073 mret
```
(disassembly via `riscv64-unknown-elf-objdump -C -S --disassemble ./esp32c3-hal/target/riscv32imc-unknown-none-elf/release/examples/gpio_interrupt`)
This outcome is superior to hand-coded interrupt routines which, lacking visibility into any non-assembly body of the interrupt handler, have to be very conservative and save the [entire CPU state to the stack frame][full-frame-save]. By instead asking LLVM to only save the registers that it uses, we defer the decision to the tool with the best context: it can more accurately account for the cost of spills if it knows that every additional register used is already at the cost of an implicit spill.
At the LLVM level, this is apparently [implemented by] marking every register as "[callee-save]," matching the semantics of an interrupt handler nicely (it has to leave the CPU state just as it found it after its `{m|s}ret`).
This approach is not suitable for every interrupt handler, as it makes no attempt to e.g. save the state in a user-accessible stack frame. For a full discussion of those challenges and tradeoffs, please refer to [the interrupt calling conventions RFC][rfc].
Inside rustc, this implementation differs from prior art because LLVM does not expose the "all-saved" function flavor as a calling convention directly, instead preferring to use an attribute that allows for differentiating between "machine-mode" and "superivsor-mode" interrupts.
Finally, some effort has been made to guide those who may not yet be aware of the differences between machine-mode and supervisor-mode interrupts as to why no `riscv-interrupt` calling convention is exposed through rustc, and similarly for why `riscv-interrupt-u` makes no appearance (as it would complicate future LLVM upgrades).
[clang-attr]: https://clang.llvm.org/docs/AttributeReference.html#interrupt-risc-v
[full-frame-save]: 9281af2ecf/src/lib.rs (L440-L469)
[implemented by]: b7fb2a3fec/llvm/lib/Target/RISCV/RISCVRegisterInfo.cpp (L61-L67)
[callee-save]: 973f1fe7a8/llvm/lib/Target/RISCV/RISCVCallingConv.td (L30-L37)
[rfc]: https://github.com/rust-lang/rfcs/pull/3246
Similar to prior support added for the mips430, avr, and x86 targets
this change implements the rough equivalent of clang's
[`__attribute__((interrupt))`][clang-attr] for riscv targets, enabling
e.g.
```rust
static mut CNT: usize = 0;
pub extern "riscv-interrupt-m" fn isr_m() {
unsafe {
CNT += 1;
}
}
```
to produce highly effective assembly like:
```asm
pub extern "riscv-interrupt-m" fn isr_m() {
420003a0: 1141 addi sp,sp,-16
unsafe {
CNT += 1;
420003a2: c62a sw a0,12(sp)
420003a4: c42e sw a1,8(sp)
420003a6: 3fc80537 lui a0,0x3fc80
420003aa: 63c52583 lw a1,1596(a0) # 3fc8063c <_ZN12esp_riscv_rt3CNT17hcec3e3a214887d53E.0>
420003ae: 0585 addi a1,a1,1
420003b0: 62b52e23 sw a1,1596(a0)
}
}
420003b4: 4532 lw a0,12(sp)
420003b6: 45a2 lw a1,8(sp)
420003b8: 0141 addi sp,sp,16
420003ba: 30200073 mret
```
(disassembly via `riscv64-unknown-elf-objdump -C -S --disassemble ./esp32c3-hal/target/riscv32imc-unknown-none-elf/release/examples/gpio_interrupt`)
This outcome is superior to hand-coded interrupt routines which, lacking
visibility into any non-assembly body of the interrupt handler, have to
be very conservative and save the [entire CPU state to the stack
frame][full-frame-save]. By instead asking LLVM to only save the
registers that it uses, we defer the decision to the tool with the best
context: it can more accurately account for the cost of spills if it
knows that every additional register used is already at the cost of an
implicit spill.
At the LLVM level, this is apparently [implemented by] marking every
register as "[callee-save]," matching the semantics of an interrupt
handler nicely (it has to leave the CPU state just as it found it after
its `{m|s}ret`).
This approach is not suitable for every interrupt handler, as it makes
no attempt to e.g. save the state in a user-accessible stack frame. For
a full discussion of those challenges and tradeoffs, please refer to
[the interrupt calling conventions RFC][rfc].
Inside rustc, this implementation differs from prior art because LLVM
does not expose the "all-saved" function flavor as a calling convention
directly, instead preferring to use an attribute that allows for
differentiating between "machine-mode" and "superivsor-mode" interrupts.
Finally, some effort has been made to guide those who may not yet be
aware of the differences between machine-mode and supervisor-mode
interrupts as to why no `riscv-interrupt` calling convention is exposed
through rustc, and similarly for why `riscv-interrupt-u` makes no
appearance (as it would complicate future LLVM upgrades).
[clang-attr]: https://clang.llvm.org/docs/AttributeReference.html#interrupt-risc-v
[full-frame-save]: 9281af2ecf/src/lib.rs (L440-L469)
[implemented by]: b7fb2a3fec/llvm/lib/Target/RISCV/RISCVRegisterInfo.cpp (L61-L67)
[callee-save]: 973f1fe7a8/llvm/lib/Target/RISCV/RISCVCallingConv.td (L30-L37)
[rfc]: https://github.com/rust-lang/rfcs/pull/3246
Make module inner and function run_analysis_to_runtime_passes in
rustc_mir_transform public to allow re-implementing the query from the
rust compiler interface.
Make `unconditional_recursion` warning detect recursive drops
Closes#55388
Also closes#50049 unless we want to keep it for the second example which this PR does not solve, but I think it is better to track that work in #57965.
r? `@oli-obk` since you are the mentor for #55388
Unresolved questions:
- [x] There are two false positives that must be fixed before merging (see diff). I suspect the best way to solve them is to perform analysis after drop elaboration instead of before, as now, but I have not explored that any further yet. Could that be an option? **Answer:** Yes, that solved the problem.
`@rustbot` label +T-compiler +C-enhancement +A-lint
Steal MIR for CTFE when possible.
Some bodies, like constants, have CTFE MIR but no optimized MIR.
In that case, have `mir_for_ctfe` steal the MIR instead of cloning it.
Add documentation to has_deref
Documentation of `has_deref` needed some polish to be more clear about where it should be used and what's it's purpose.
cc https://github.com/rust-lang/rust/issues/114401
r? `@RalfJung`
Do not run ConstProp on mir_for_ctfe.
This pass does not seem to be useful any more. The const-prop lints are now run by `tcx.mir_drops_elaborated_and_const_checked`, and the const-prop opt should never emit any diagnostic.
Forbid old-style `simd_shuffleN` intrinsics
Don't merge before https://github.com/rust-lang/packed_simd/pull/350 has made its way to crates.io
We used to support specifying the lane length of simd_shuffle ops by attaching the lane length to the name of the intrinsic (like `simd_shuffle16`). After this PR, you cannot do that anymore, and need to instead either rely on inference of the `idx` argument type or specify it as `simd_shuffle::<_, [u32; 16], _>`.
r? `@workingjubilee`
Operand types are now tracked explicitly, so there is no need to reserve ID 0
for the special always-zero counter.
As part of the renumbering, this change fixes an off-by-one error in the way
counters were counted by the `coverageinfo` query. As a result, functions
should now have exactly the number of counters they actually need, instead of
always having an extra counter that is never used.
Operand types are now tracked explicitly, so there is no need for expression
IDs to avoid counter IDs by descending from `u32::MAX`. Instead they can just
count up from 0, and can be used directly as indices when necessary.
Because the three kinds of operand are now distinguished explicitly, we no
longer need fiddly code to disambiguate counter IDs and expression IDs based on
the total number of counters/expressions in a function.
This does increase the size of operands from 4 bytes to 8 bytes, but that
shouldn't be a big deal since they are mostly stored inside boxed structures,
and the current coverage code is not particularly size-optimized anyway.
Substitute types before checking inlining compatibility.
Addresses https://github.com/rust-lang/rust/issues/112332 and https://github.com/rust-lang/rust/issues/113781
I don't have a minimal test, but I this seems to remove the ICE locally.
This whole pre-inlining validation mirrors the "real" MIR validation pass to verify that inlined MIR will still pass validation.
The debuginfo loop is added because MIR validation check projections in debuginfo.
Likewise, MIR validation only checks `is_subtype`, so there is no reason for a stronger check.
The types were not being substituted in `check_equal`, so we were not bailing out of inlining if the substituted MIR callee body would not pass validation.
It makes it sound like the `ExprKind` and `Rvalue` are supposed to represent all pointer related
casts, when in reality their just used to share a some enum variants. Make it clear there these
are only coercion to make it clear why only some pointer related "casts" are in the enum.
Rewrite `UnDerefer`
Currently, `UnDerefer` is used by drop elaboration to undo the effects of the `Derefer` pass. However, it just recreates the original places with derefs in the middle of the projection. Because `ProjectionElem::Deref` is intended to be removed completely in the future, this will not work forever.
This PR introduces a `deref_chain` method that returns the places behind `DerefTemp` locals in a place and rewrites the move path code to use this. In the process, `UnDerefer` was merged into `MovePathLookup`. Now that move paths use the same places as in the MIR, the other uses of `UnDerefer` no longer require it.
See #98145
cc `@ouz-a`
r? `@oli-obk`
mir opt + codegen: handle subtyping
fixes#107205
the same issue was caused in multiple places:
- mir opts: both copy and destination propagation
- codegen: assigning operands to locals (which also propagates values)
I changed codegen to always update the type in the operands used for locals which should guard against any new occurrences of this bug going forward. I don't know how to make mir optimizations more resilient here. Hopefully the added tests will be enough to detect any trivially wrong optimizations going forward.
Use `CoverageKind::as_operand_id` instead of manually reimplementing it
These two pieces of code are functionally equivalent to the `CoverageKind::as_operand_id` method that already exists, and is already used elsewhere in this file.
This slightly reduces the amount of code that manually pattern-matches on `CoverageKind`.
Migrate `TyCtxt::predicates_of` and `ParamEnv::caller_bounds` to `Clause`
The last big change in the series.
I will follow-up with additional filed issues once this PR lands:
- [ ] Investigate making `TypeFoldable<TyCtxt<'tcx>> for ty::Clause<'tcx>` implementation less weird: 2efe091705/compiler/rustc_middle/src/ty/structural_impls.rs (L672)
- [ ] Clean up the elaborator since it should only be emitting child clauses, not predicates
- [ ] Rename identifiers like `pred` and `predicates` to `clause` if they're actually clauses around the codebase
- [ ] Validate that all of the `ToPredicate` impls are acutally still needed, or prune them if they're not
r? `@ghost` until the other branch lands
Add retag in MIR transform: `Adt` for `Unique` may contain a reference
Following #112662 , `may_contain_reference` in `rustc_mir_transform::add_retag` underapproximates too much the types that require retagging.
r? ``@RalfJung``
Add a fully fledged `Clause` type, rename old `Clause` to `ClauseKind`
Does two basic things before I put up a more delicate set of PRs (along the lines of #112714, but hopefully much cleaner) that migrate existing usages of `ty::Predicate` to `ty::Clause` (`predicates_of`/`item_bounds`/`ParamEnv::caller_bounds`).
1. Rename `Clause` to `ClauseKind`, so it's parallel with `PredicateKind`.
2. Add a new `Clause` type which is parallel to `Predicate`.
* This type exposes `Clause::kind(self) -> Binder<'tcx, ClauseKind<'tcx>>` which is parallel to `Predicate::kind` 😸
The new `Clause` type essentially acts as a newtype wrapper around `Predicate` that asserts that it is specifically a `PredicateKind::Clause`. Turns out from experimentation[^1] that this is not negative performance-wise, which is wonderful, since this a much simpler design than something that requires encoding the discriminant into the alignment bits of a predicate kind, or something else like that...
r? ``@lcnr`` or ``@oli-obk``
[^1]: https://github.com/rust-lang/rust/pull/112714#issuecomment-1595653910
Switch the BB CFG cache from postorder to RPO
The `BasicBlocks` CFG cache is interesting:
- it stores a postorder, but `traversal::postorder` doesn't use it
- `traversal::reverse_postorder` does traverse the postorder cache backwards
- we do more RPO traversals than postorder traversals (around 20x on the perf.rlo benchmarks IIRC) but it's not cached
- a couple places here and there were manually reversing the non-cached postorder traversal
This PR switches the order of the cache, and makes a bit more use of it. This is a tiny win locally, but it's also for consistency and aesthetics.
r? `@ghost`
Launch a non-unwinding panic for misaligned pointer deref
This panic already never unwinds, but that's only because it always hits the unwind guard that's created by our `UnwindAction::Terminate`. Hitting the unwind guard generates a huge double-panic backtrace. Now we generate a normal-looking panic message when this check is hit.
r? `@thomcc`
Prevent `.eh_frame` from being emitted for `-C panic=abort`
Since `CheckAlignment` pass is after the `AbortUnwindingCalls` pass, the `UnwindAction::Terminate` inserted in it has no chance to be converted to `UnwindAction::Unreachable` anymore, causing us to emit landing pads that are not necessary. Although these landing pads can themselves be eliminated by LLVM, `.eh_frame` sections are still generated. This causes trouble for Rust-for-Linux project recently.
This PR changes it to generate `UnwindAction::Terminate` when we opt for `-Cpanic=unwind`, and `UnwindAction::Unreachable` for `-Cpanic=abort`.
`@ojeda`
Add MVP suggestion for `unsafe_op_in_unsafe_fn`
Rebase of https://github.com/rust-lang/rust/pull/99827
cc tracking issue https://github.com/rust-lang/rust/issues/71668
No real changes since the original PR, just migrated the new suggestion to use fluent messages and added a couple more testcases, AFAICT from the discussion there were no outstanding changes requested.
Write to stdout if `-` is given as output file
With this PR, if `-o -` or `--emit KIND=-` is provided, output will be written to stdout instead. Binary output (those of type `obj`, `llvm-bc`, `link` and `metadata`) being written this way will result in an error unless stdout is not a tty. Multiple output types going to stdout will trigger an error too, as they will all be mixded together.
This implements https://github.com/rust-lang/compiler-team/issues/431
The idea behind the changes is to introduce an `OutFileName` enum that represents the output - be it a real path or stdout - and to use this enum along the code paths that handle different output types.
Take MIR dataflow analyses by mutable reference
The main motivation here is any analysis requiring dynamically sized scratch memory to work. One concrete example would be pointer target tracking, where tracking the results of a dereference can result in multiple possible targets. This leads to processing multi-level dereferences requiring the ability to handle a changing number of potential targets per step. A (simplified) function for this would be `fn apply_deref(potential_targets: &mut Vec<Target>)` which would use the scratch space contained in the analysis to send arguments and receive the results.
The alternative to this would be to wrap everything in a `RefCell`, which is what `MaybeRequiresStorage` currently does. This comes with a small perf cost and loses the compiler's guarantee that we don't try to take multiple borrows at the same time.
For the implementation:
* `AnalysisResults` is an unfortunate requirement to avoid an unconstrained type parameter error.
* `CloneAnalysis` could just be `Clone` instead, but that would result in more work than is required to have multiple cursors over the same result set.
* `ResultsVisitor` now takes the results type on in each function as there's no other way to have access to the analysis without cloning it. This could use an associated type rather than a type parameter, but the current approach makes it easier to not care about the type when it's not necessary.
* `MaybeRequiresStorage` now no longer uses a `RefCell`, but the graphviz formatter now does. It could be removed, but that would require even more changes and doesn't really seem necessary.
If `-o -` or `--emit KIND=-` is provided, output will be written
to stdout instead. Binary output (`obj`, `llvm-bc`, `link` and
`metadata`) being written this way will result in an error unless
stdout is not a tty. Multiple output types going to stdout will
trigger an error too, as they will all be mixded together.
Only check inlining counter after recursing.
This PR aims to reduce the strength of https://github.com/rust-lang/rust/pull/105119 even more.
In the current implementation, we check the inline count before recursing. This means that we never actually reach inlining depth 3.
This PR checks the counter after recursion, to give a chance to inline at depth >= 3.
r? `@scottmcm`
cc `@JakobDegen`
Use translatable diagnostics in `rustc_const_eval`
This PR:
* adds a `no_span` parameter to `note` / `help` attributes when using `Subdiagnostic` to allow adding notes/helps without using a span
* has minor tweaks and changes to error messages
Enable ConstGoto and SeparateConstSwitch passes by default
These 2 passes implement a limited form of jump-threading.
Filing this PR to see if enabling them would be lighter than https://github.com/rust-lang/rust/pull/107009.
Enable ScalarReplacementOfAggregates in optimized builds
Like MatchBranchSimplification, this pass is known to produce significant runtime improvements in Cranelift artifacts, and I believe based on the perf runs here that the primary effect of this pass is to empower MatchBranchSimplification. ScalarReplacementOfAggregates on its own has little effect on anything, but when this was rebased up to include https://github.com/rust-lang/rust/pull/112001 we started seeing significant and majority-positive results.
Based on the fact that we see most of the regressions in debug builds (https://github.com/rust-lang/rust/pull/112002#issuecomment-1566270144) and some rather significant ones in cycles and wall time, I'm only enabling this in optimized builds at the moment.
Only rewrite valtree-constants to patterns and keep other constants opaque
Now that we can reliably fall back to comparing constants with `PartialEq::eq` to the match scrutinee, we can
1. eagerly try to convert constants to valtrees
2. then deeply convert the valtree to a pattern
3. if the to-valtree conversion failed, create an "opaque constant" pattern.
This PR specifically avoids any behavioral changes or major cleanups. What we can now do as follow ups is
* move the two remaining call sites to `destructure_mir_constant` off that query
* make valtree to pattern conversion infallible
* this needs to be done after careful analysis of the effects. There may be user visible changes from that.
based on https://github.com/rust-lang/rust/pull/111768
change `BorrowKind::Unique` to be a mutating `PlaceContext`
fixes#112056
I believe that `BorrowKind::Unique` is a footgun in general, so I added a FIXME and opened https://github.com/rust-lang/rust/issues/112072. This is a bit too involved for this PR though.
MIR: opt-in normalization of `BasicBlock` and `Local` numbering
This doesn't matter at all for actual codegen, but after spending some time reading pre-codegen MIR, I was wishing I didn't have to jump around so much in reading post-inlining code.
So this add two passes that are off by default for every mir level, but can be enabled (`-Zmir-enable-passes=+ReorderBasicBlocks,+ReorderLocals`) for humans.
Don't check for misaligned raw pointer derefs inside Rvalue::AddressOf
From https://github.com/rust-lang/rust/pull/112026#issuecomment-1565686697:
rustc 1.70 (stable next week) added a Mir pass to add pointer alignment checks in debug mode. Adding these checks caused some crates to break, but that was expected, since they contain broken code (https://github.com/rust-lang/rust/issues/111487) for tracking that.
However, the checks added are slightly more aggressive than they should have been. Specifically, they also check the place in an `addr_of!` expression. Whether lack of alignment there is or isn't UB is unclear. This PR modifies the pass to not affect those cases.
I spot checked the crater regressions and the ones I saw were not the case that this PR is modifying. It still seems good to not land anything overaggressive though
Enable MatchBranchSimplification
This pass is one of the small number of benefits from `-Zmir-opt-level=3` that has motivated rustc_codegen_cranelift to use it:
19ed0aade6/compiler/rustc_codegen_cranelift/build_system/build_sysroot.rs (L244-L246)
Cranelift's motivation for this is _runtime_ performance improvements in debug builds. Lifting this pass all the way to `-Zmir-opt-level=1` seems to come without significant perf overhead, so that's what I'm suggesting here.
Ensure Fluent messages are in alphabetical order
Fixes#111847
This adds a tidy check to ensure Fluent messages are in alphabetical order, as well as sorting all existing messages. I think the error could be worded better, would appreciate suggestions.
<details>
<summary>Script used to sort files</summary>
```py
import sys
import re
fn = sys.argv[1]
with open(fn, 'r') as f:
data = f.read().split("\n")
chunks = []
cur = ""
for line in data:
if re.match(r"^([a-zA-Z0-9_]+)\s*=\s*", line):
chunks.append(cur)
cur = ""
cur += line + "\n"
chunks.append(cur)
chunks.sort()
with open(fn, 'w') as f:
f.write(''.join(chunks).strip("\n\n") + "\n")
```
</details>
Rollup of 5 pull requests
Successful merges:
- #111741 (Use `ObligationCtxt` in custom type ops)
- #111840 (Expose more information in `get_body_with_borrowck_facts`)
- #111876 (Roll compiler_builtins to 0.1.92)
- #111912 (Use `Option::is_some_and` and `Result::is_ok_and` in the compiler )
- #111915 (libtest: Improve error when missing `-Zunstable-options`)
r? `@ghost`
`@rustbot` modify labels: rollup
Use `Option::is_some_and` and `Result::is_ok_and` in the compiler
`.is_some_and(..)`/`.is_ok_and(..)` replace `.map_or(false, ..)` and `.map(..).unwrap_or(false)`, making the code more readable.
This PR is a sibling of https://github.com/rust-lang/rust/pull/111873#issuecomment-1561316515
Work around `rust-analyzer` false-positive type errors
rust-analyzer incorrectly reports two type errors in `debug.rs`:
> expected &dyn Display, found &i32
> expected &dyn Display, found &i32
This is due to a known bug in r-a: (https://github.com/rust-lang/rust-analyzer/issues/11847).
In these particular cases, changing `&0` to `&0i32` seems to be enough to avoid the bug.
Preprocess and cache dominator tree
Preprocessing dominators has a very strong effect for https://github.com/rust-lang/rust/pull/111344.
That pass checks that assignments dominate their uses repeatedly. Using the unprocessed dominator tree caused a quadratic runtime (number of bbs x depth of the dominator tree).
This PR also caches the dominator tree and the pre-processed dominators in the MIR cfg cache.
Rebase of https://github.com/rust-lang/rust/pull/107157
cc `@tmiasko`
Stop turning transmutes into discriminant reads in mir-opt
Partially reverts #109612, as after #109993 these aren't actually equivalent any more, and I'm no longer confident this was ever an improvement in the first place.
Having this "simplification" meant that similar-looking code actually did somewhat different things. For example,
```rust
pub unsafe fn demo1(x: std::cmp::Ordering) -> u8 {
std::mem::transmute(x)
}
pub unsafe fn demo2(x: std::cmp::Ordering) -> i8 {
std::mem::transmute(x)
}
```
in nightly today is generating <https://rust.godbolt.org/z/dPK58zW18>
```llvm
define noundef i8 `@_ZN7example5demo117h341ef313673d2ee6E(i8` noundef %x) unnamed_addr #0 {
%0 = icmp uge i8 %x, -1
%1 = icmp ule i8 %x, 1
%2 = or i1 %0, %1
call void `@llvm.assume(i1` %2)
ret i8 %x
}
define noundef i8 `@_ZN7example5demo217h5ad29f361a3f5700E(i8` noundef %0) unnamed_addr #0 {
%x = alloca i8, align 1
store i8 %0, ptr %x, align 1
%1 = load i8, ptr %x, align 1, !range !2, !noundef !3
ret i8 %1
}
```
Which feels too different when the original code is essentially identical.
---
Aside: that example is different *after* optimizations too:
```llvm
define noundef i8 `@_ZN7example5demo117h341ef313673d2ee6E(i8` noundef returned %x) unnamed_addr #0 {
%0 = add i8 %x, 1
%1 = icmp ult i8 %0, 3
tail call void `@llvm.assume(i1` %1)
ret i8 %x
}
define noundef i8 `@_ZN7example5demo217h5ad29f361a3f5700E(i8` noundef returned %0) unnamed_addr #1 {
ret i8 %0
}
```
so turning the `Transmute` into a `Discriminant` was arguably just making things worse, so leaving it alone instead -- and thus having less code in rustc -- seems clearly better.
Handle error body in generator layout
Fixes#111468
I feel like making this query return `Option<GeneratorLayout>` might be better but had some issues with that approach
Partially reverts 109612, as after 109993 these aren't actually equivalent any more, and I'm no longer confident this was ever an improvement in the first place.
allow mutating function args through `&raw const`
Fixes https://github.com/rust-lang/rust/issues/111502 by "turning off the sketchy optimization while we figure out if this is ok", like `@JakobDegen` said.
The first commit in this PR removes some suspicious looking logic from the same method, but should have no functional changes, since it doesn't modify the `context` outside of the method. Best reviewed commit by commit.
r? opsem
Verify copies of mutable pointers in 2 stages in ReferencePropagation
Fixes#111422
In the first stage, we mark the copies as reborrows, to be checked later.
In the second stage, we walk the reborrow chains to verify that all stages are fully replacable.
The replacement itself mirrors the check, and iterates through the reborrow chain.
r? ``````@RalfJung``````
cc ``````@JakobDegen``````
Optimize dataflow-const-prop place-tracking infra
Optimization opportunities found while investigating https://github.com/rust-lang/rust/pull/110719
Computing places breadth-first ensures that we create short projections before deep projections, since the former are more likely to be propagated.
The most relevant is the pre-computation of flooded places. Callgrind showed `flood_*` methods and especially `preorder_preinvoke` were especially hot. This PR attempts to pre-compute the set of `ValueIndex` that `preorder_invoke` would visit.
Using this information, we make some `PlaceIndex` inaccessible when they contain no `ValueIndex`, allowing to skip computations for those places.
cc `@jachris` as original author
Rollup of 6 pull requests
Successful merges:
- #104070 (Prevent aborting guard from aborting the process in a forced unwind)
- #109410 (Introduce `AliasKind::Inherent` for inherent associated types)
- #111004 (Migrate `mir_transform` to translatable diagnostics)
- #111118 (Suggest struct when we get colon in fileds in enum)
- #111170 (Diagnostic args are still args if they're documented)
- #111354 (Fix miscompilation when calling default methods on `Future`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Disable nrvo mir opt
See #111005 and #110902 . The ICE can definitely be hit on stable, the miscompilation I'm not sure about. The pass makes some pretty sketchy assumptions though, and we should not have it on while that's the case.
I'm not going to work on actually fixing this, it's probably not excessively difficult though.
r? rust-lang/mir-opt
ConstProp into PlaceElem::Index.
Noticed this while looking at keccak output MIR.
This pass aims to replace `ProjectionElem::Index` with `ProjectionElem::ConstantIndex` during ConstProp.
r? `@ghost`
Make `(try_)subst_and_normalize_erasing_regions` take `EarlyBinder`
Changes `subst_and_normalize_erasing_regions` and `try_subst_and_normalize_erasing_regions` to take `EarlyBinder<T>` instead of `T`.
(related to #105779)
This was suggested by `@BoxyUwU` in https://github.com/rust-lang/rust/pull/107753#discussion_r1105828139. After changing `type_of` to return `EarlyBinder`, there were several places where the binder was immediately skipped to call `tcx.subst_and_normalize_erasing_regions`, only for the binder to be reconstructed inside of that method.
r? `@BoxyUwU`
Currently a `{D,Subd}iagnosticMessage` can be created from any type that
impls `Into<String>`. That includes `&str`, `String`, and `Cow<'static,
str>`, which are reasonable. It also includes `&String`, which is pretty
weird, and results in many places making unnecessary allocations for
patterns like this:
```
self.fatal(&format!(...))
```
This creates a string with `format!`, takes a reference, passes the
reference to `fatal`, which does an `into()`, which clones the
reference, doing a second allocation. Two allocations for a single
string, bleh.
This commit changes the `From` impls so that you can only create a
`{D,Subd}iagnosticMessage` from `&str`, `String`, or `Cow<'static,
str>`. This requires changing all the places that currently create one
from a `&String`. Most of these are of the `&format!(...)` form
described above; each one removes an unnecessary static `&`, plus an
allocation when executed. There are also a few places where the existing
use of `&String` was more reasonable; these now just use `clone()` at
the call site.
As well as making the code nicer and more efficient, this is a step
towards possibly using `Cow<'static, str>` in
`{D,Subd}iagnosticMessage::{Str,Eager}`. That would require changing
the `From<&'a str>` impls to `From<&'static str>`, which is doable, but
I'm not yet sure if it's worthwhile.
Box AssertKind
r? `@nnethercote` this feels like your kind of thing
I want to add a new variant to `AssertKind` that needs 3 operands, and that ends up breaking a bunch of size assertions. So... what if we go the opposite direction first; shrinking `AssertKind` by boxing it?
Don't validate constants in const propagation
Validation is neither necessary nor desirable.
The constant validation is already omitted at mir-opt-level >= 3, so there there are not changes in MIR test output (the propagation of invalid constants is covered by an existing test in tests/mir-opt/const_prop/invalid_constant.rs).
Previously, when borrowck failed it would taint all promoteds within the MIR
body. An attempt to evaluated the promoteds would subsequently fail with
spurious "note: erroneous constant used". For example:
```console
...
note: erroneous constant used
--> tests/ui/borrowck/tainted-promoteds.rs:7:9
|
7 | a = &0 * &1 * &2 * &3;
| ^^
note: erroneous constant used
--> tests/ui/borrowck/tainted-promoteds.rs:7:14
|
7 | a = &0 * &1 * &2 * &3;
| ^^
note: erroneous constant used
--> tests/ui/borrowck/tainted-promoteds.rs:7:19
|
7 | a = &0 * &1 * &2 * &3;
| ^^
note: erroneous constant used
--> tests/ui/borrowck/tainted-promoteds.rs:7:24
|
7 | a = &0 * &1 * &2 * &3;
| ^^
```
Borrowck failure doesn't indicate that there is anything wrong with
promoteds. Leave them untainted.
Validation is neither necessary nor desirable.
The validation is already omitted at mir-opt-level >= 3, so there there
are not changes in MIR test output (the propagation of invalid constants
is covered by an existing test in tests/mir-opt/const_prop/invalid_constant.rs).
coverage: Don't underflow column number
I noticed this when running coverage on a debug build of rustc. There
may be other places that do this but I'm just fixing the one I hit.
r? `@wesleywiser` `@richkadel`
They're semantically the same, so this means the backends don't need to handle the intrinsic and means fewer MIR basic blocks in pointer arithmetic code.
Switch to `EarlyBinder` for `explicit_item_bounds`
Part of the work to finish https://github.com/rust-lang/rust/issues/105779.
This PR adds `EarlyBinder` to the return type of the `explicit_item_bounds` query and removes `bound_explicit_item_bounds`.
r? `@compiler-errors` (hope it's okay to request you, since you reviewed #110299 and #110498😃)
Normalize types and consts in MIR opts.
Some passes were using a non-RevealAll param_env, which is needlessly restrictive in mir-opts.
As a drive-by, we normalize all constants, since just normalizing their types is not enough.
Add `intrinsics::transmute_unchecked`
This takes a whole 3 lines in `compiler/` since it lowers to `CastKind::Transmute` in MIR *exactly* the same as the existing `intrinsics::transmute` does, it just doesn't have the fancy checking in `hir_typeck`.
Added to enable experimenting with the request in <https://github.com/rust-lang/rust/pull/106281#issuecomment-1496648190> and because the portable-simd folks might be interested for dependently-sized array-vector conversions.
It also simplifies a couple places in `core`.
See also https://github.com/rust-lang/rust/pull/108442#issuecomment-1474777273, where `CastKind::Transmute` was added having exactly these semantics before the lang meeting (which I wasn't in) independently expressed interest.
Remove the size of locals heuristic in MIR inlining
This heuristic doesn't necessarily correlate to complexity of the MIR Body. In particular, a lot of straight-line code in MIR tends to never reuse a local, even though any optimizer would effectively reuse the storage or just put everything in registers. So it doesn't even necessarily make sense that this would be a stack size heuristic.
So... what happens if we just delete the heuristic? The benchmark suite improves significantly. Less heuristics better?
r? `@cjgillot`
Run various queries from other queries instead of explicitly in phases
These are just legacy leftovers from when rustc didn't have a query system. While there are more cleanups of this sort that can be done here, I want to land them in smaller steps.
This phased order of query invocations was already a lie, as any query that looks at types (e.g. the wf checks run before) can invoke e.g. const eval which invokes borrowck, which invokes typeck, ...
This takes a whole 3 lines in `compiler/` since it lowers to `CastKind::Transmute` in MIR *exactly* the same as the existing `intrinsics::transmute` does, it just doesn't have the fancy checking in `hir_typeck`.
Added to enable experimenting with the request in <https://github.com/rust-lang/rust/pull/106281#issuecomment-1496648190> and because the portable-simd folks might be interested for dependently-sized array-vector conversions.
It also simplifies a couple places in `core`.
Evaluate place expression in `PlaceMention`
https://github.com/rust-lang/rust/pull/102256 introduces a `PlaceMention(place)` MIR statement which keep trace of `let _ = place` statements from surface rust, but without semantics.
This PR proposes to change the behaviour of `let _ =` patterns with respect to the borrow-checker to verify that the bound place is live.
Specifically, consider this code:
```rust
let _ = {
let a = 5;
&a
};
```
This passes borrowck without error on stable. Meanwhile, replacing `_` by `_: _` or `_p` errors with "error[E0597]: `a` does not live long enough", [see playground](https://play.rust-lang.org/?version=stable&mode=debug&edition=2021&gist=c448d25a7c205dc95a0967fe96bccce8).
This PR *does not* change how `_` patterns behave with respect to initializedness: it remains ok to bind a moved-from place to `_`.
The relevant test is `tests/ui/borrowck/let_underscore_temporary.rs`. Crater check found no regression.
For consistency, this PR changes miri to evaluate the place found in `PlaceMention`, and report eventual dangling pointers found within it.
r? `@RalfJung`
Add offset_of! macro (RFC 3308)
Implements https://github.com/rust-lang/rfcs/pull/3308 (tracking issue #106655) by adding the built in macro `core::mem::offset_of`. Two of the future possibilities are also implemented:
* Nested field accesses (without array indexing)
* DST support (for `Sized` fields)
I wrote this a few months ago, before the RFC merged. Now that it's merged, I decided to rebase and finish it.
cc `@thomcc` (RFC author)
Deduplicate unreachable blocks, for real this time
In https://github.com/rust-lang/rust/pull/106428 (in particular 41eda69516) we noticed that inlining `unreachable_unchecked` can produce duplicate unreachable blocks. So we improved two MIR optimizations: `SimplifyCfg` was given a simplify to deduplicate unreachable blocks, then `InstCombine` was given a combiner to deduplicate switch targets that point at the same block. The problem is that change doesn't actually work.
Our current pass order is
```
SimplifyCfg (does nothing relevant to this situation)
Inline (produces multiple unreachable blocks)
InstCombine (doesn't do anything here, oops)
SimplifyCfg (produces the duplicate SwitchTargets that InstCombine is looking for)
```
So in here, I have factored out the specific function from `InstCombine` and placed it inside the simplify that produces the case it is looking for. This should ensure that it runs in the scenario it was designed for.
Fixes https://github.com/rust-lang/rust/issues/110551
r? `@cjgillot`
Don't allocate on SimplifyCfg/Locals/Const on every MIR pass
Hey! 👋🏾 This is a first PR attempt to see if I could speed up some rustc internals.
Thought process:
```rust
pub struct SimplifyCfg {
label: String,
}
```
in [compiler/src/rustc_mir_transform/simplify.rs](7908a1d654/compiler/rustc_mir_transform/src/simplify.rs (L39)) fires multiple times per MIR analysis. This means that a likely string allocation is happening in each of these runs, which may add up, as they are not being lazily allocated or cached in between the different passes.
...yes, I know that adding a global static array is probably not the future-proof solution, but I wanted to lob this now as a proof of concept to see if it's worth shaving off a few cycles and then making more robust.
Encode hashes as bytes, not varint
In a few places, we store hashes as `u64` or `u128` and then apply `derive(Decodable, Encodable)` to the enclosing struct/enum. It is more efficient to encode hashes directly than try to apply some varint encoding. This PR adds two new types `Hash64` and `Hash128` which are produced by `StableHasher` and replace every use of storing a `u64` or `u128` that represents a hash.
Distribution of the byte lengths of leb128 encodings, from `x build --stage 2` with `incremental = true`
Before:
```
( 1) 373418203 (53.7%, 53.7%): 1
( 2) 196240113 (28.2%, 81.9%): 3
( 3) 108157958 (15.6%, 97.5%): 2
( 4) 17213120 ( 2.5%, 99.9%): 4
( 5) 223614 ( 0.0%,100.0%): 9
( 6) 216262 ( 0.0%,100.0%): 10
( 7) 15447 ( 0.0%,100.0%): 5
( 8) 3633 ( 0.0%,100.0%): 19
( 9) 3030 ( 0.0%,100.0%): 8
( 10) 1167 ( 0.0%,100.0%): 18
( 11) 1032 ( 0.0%,100.0%): 7
( 12) 1003 ( 0.0%,100.0%): 6
( 13) 10 ( 0.0%,100.0%): 16
( 14) 10 ( 0.0%,100.0%): 17
( 15) 5 ( 0.0%,100.0%): 12
( 16) 4 ( 0.0%,100.0%): 14
```
After:
```
( 1) 372939136 (53.7%, 53.7%): 1
( 2) 196240140 (28.3%, 82.0%): 3
( 3) 108014969 (15.6%, 97.5%): 2
( 4) 17192375 ( 2.5%,100.0%): 4
( 5) 435 ( 0.0%,100.0%): 5
( 6) 83 ( 0.0%,100.0%): 18
( 7) 79 ( 0.0%,100.0%): 10
( 8) 50 ( 0.0%,100.0%): 9
( 9) 6 ( 0.0%,100.0%): 19
```
The remaining 9 or 10 and 18 or 19 are `u64` and `u128` respectively that have the high bits set. As far as I can tell these are coming primarily from `SwitchTargets`.
Check freeze with right param-env in `deduced_param_attrs`
We're checking if a trait (`Freeze`) holds in a polymorphic function, but not using that function's own (reveal-all) param-env. This causes us to try to eagerly normalize a specializable projection type that has no default value, which causes an ICE.
Fixes#110171
Permit MIR inlining without #[inline]
I noticed that there are at least a handful of portable-simd functions that have no `#[inline]` but compile to an assign + return.
I locally benchmarked inlining thresholds between 0 and 50 in increments of 5, and 50 seems to be the best. Interesting. That didn't include check builds though, ~maybe perf will have something to say about that~.
Perf has little useful to say about this. We generally regress all the check builds, as best as I can tell, due to a number of small codegen changes in a particular hot function in the compiler. Probably this is because we've nudged the inlining outcomes all over, and uses of `#[inline(always)]`/`#[inline(never)]` might need to be adjusted.
This allows us to get rid of the `rustc_const_eval->rustc_borrowck`
dependency edge which was delaying the compilation of borrowck.
The added utils in `rustc_middle` are small and should not affect
compile times there.
Preserve argument indexes when inlining MIR
We store argument indexes on VarDebugInfo. Unlike the previous method of relying on the variable index to know whether a variable is an argument, this survives MIR inlining.
We also no longer check if var.source_info.scope is the outermost scope. When a function gets inlined, the arguments to the inner function will no longer be in the outermost scope. What we care about though is whether they were in the outermost scope prior to inlining, which we know by whether we assigned an argument index.
Fixes#83217
I considered using `Option<NonZeroU16>` instead of `Option<u16>` to store the index. I didn't because `TypeFoldable` isn't implemented for `NonZeroU16` and because it looks like due to padding, it currently wouldn't make any difference. But I indexed from 1 anyway because (a) it'll make it easier if later it becomes worthwhile to use a `NonZeroU16` and because the arguments were previously indexed from 1, so it made for a smaller change.
This is my first PR on rust-lang/rust, so apologies if I've gotten anything not quite right.
We store argument indexes on VarDebugInfo. Unlike the previous method of
relying on the variable index to know whether a variable is an argument,
this survives MIR inlining.
We also no longer check if var.source_info.scope is the outermost scope.
When a function gets inlined, the arguments to the inner function will
no longer be in the outermost scope. What we care about though is
whether they were in the outermost scope prior to inlining, which we
know by whether we assigned an argument index.
Make elaboration generic over input
Combines all the `elaborate_*` family of functions into just one, which is an iterator over the same type that you pass in (e.g. elaborating `Predicate` gives `Predicate`s, elaborating `Obligation`s gives `Obligation`s, etc.)
Refactor unwind in MIR
This makes unwinding from current `Option<BasicBlock>` into
```rust
enum UnwindAction {
Continue,
Cleanup(BasicBlock),
Unreachable,
Terminate,
}
```
cc `@JakobDegen` `@RalfJung` `@Amanieu`
Unify terminology used in unwind action and terminator, and reflect
the fact that a nounwind panic is triggered instead of an immediate
abort is triggered for this terminator.
Move a const-prop-lint specific hack from mir interpret to const-prop-lint and make it fallible
fixes#109743
This hack didn't need to live in the mir interpreter. For const-prop-lint it is entirely correct to avoid doing any const prop if normalization fails at this stage. Most likely we couldn't const propagate anything anyway, and if revealing was needed (so opaque types were involved), we wouldn't want to be too smart and leak the hidden type anyway.
Insert alignment checks for pointer dereferences when debug assertions are enabled
Closes https://github.com/rust-lang/rust/issues/54915
- [x] Jake tells me this sounds like a place to use `MirPatch`, but I can't figure out how to insert a new basic block with a new terminator in the middle of an existing basic block, using `MirPatch`. (if nobody else backs up this point I'm checking this as "not actually a good idea" because the code looks pretty clean to me after rearranging it a bit)
- [x] Using `CastKind::PointerExposeAddress` is definitely wrong, we don't want to expose. Calling a function to get the pointer address seems quite excessive. ~I'll see if I can add a new `CastKind`.~ `CastKind::Transmute` to the rescue!
- [x] Implement a more helpful panic message like slice bounds checking.
r? `@oli-obk`
Update `ty::VariantDef` to use `IndexVec<FieldIdx, FieldDef>`
And while doing the updates for that, also uses `FieldIdx` in `ProjectionKind::Field` and `TypeckResults::field_indices`.
There's more places that could use it (like `rustc_const_eval` and `LayoutS`), but I tried to keep this PR from exploding to *even more* places.
Part 2/? of https://github.com/rust-lang/compiler-team/issues/606
And while doing the updates for that, also uses `FieldIdx` in `ProjectionKind::Field` and `TypeckResults::field_indices`.
There's more places that could use it (like `rustc_const_eval` and `LayoutS`), but I tried to keep this PR from exploding to *even more* places.
Part 2/? of https://github.com/rust-lang/compiler-team/issues/606
Partial stabilization of `once_cell`
This PR aims to stabilize a portion of the `once_cell` feature:
- `core::cell::OnceCell`
- `std::cell::OnceCell` (re-export of the above)
- `std::sync::OnceLock`
This will leave `LazyCell` and `LazyLock` unstabilized, which have been moved to the `lazy_cell` feature flag.
Tracking issue: https://github.com/rust-lang/rust/issues/74465 (does not fully close, but it may make sense to move to a new issue)
Future steps for separate PRs:
- ~~Add `#[inline]` to many methods~~ #105651
- Update cranelift usage of the `once_cell` crate
- Update rust-analyzer usage of the `once_cell` crate
- Update error messages discussing once_cell
## To be stabilized API summary
```rust
// core::cell (in core/cell/once.rs)
pub struct OnceCell<T> { .. }
impl<T> OnceCell<T> {
pub const fn new() -> OnceCell<T>;
pub fn get(&self) -> Option<&T>;
pub fn get_mut(&mut self) -> Option<&mut T>;
pub fn set(&self, value: T) -> Result<(), T>;
pub fn get_or_init<F>(&self, f: F) -> &T where F: FnOnce() -> T;
pub fn into_inner(self) -> Option<T>;
pub fn take(&mut self) -> Option<T>;
}
impl<T: Clone> Clone for OnceCell<T>;
impl<T: Debug> Debug for OnceCell<T>
impl<T> Default for OnceCell<T>;
impl<T> From<T> for OnceCell<T>;
impl<T: PartialEq> PartialEq for OnceCell<T>;
impl<T: Eq> Eq for OnceCell<T>;
```
```rust
// std::sync (in std/sync/once_lock.rs)
impl<T> OnceLock<T> {
pub const fn new() -> OnceLock<T>;
pub fn get(&self) -> Option<&T>;
pub fn get_mut(&mut self) -> Option<&mut T>;
pub fn set(&self, value: T) -> Result<(), T>;
pub fn get_or_init<F>(&self, f: F) -> &T where F: FnOnce() -> T;
pub fn into_inner(self) -> Option<T>;
pub fn take(&mut self) -> Option<T>;
}
impl<T: Clone> Clone for OnceLock<T>;
impl<T: Debug> Debug for OnceLock<T>;
impl<T> Default for OnceLock<T>;
impl<#[may_dangle] T> Drop for OnceLock<T>;
impl<T> From<T> for OnceLock<T>;
impl<T: PartialEq> PartialEq for OnceLock<T>
impl<T: Eq> Eq for OnceLock<T>;
impl<T: RefUnwindSafe + UnwindSafe> RefUnwindSafe for OnceLock<T>;
unsafe impl<T: Send> Send for OnceLock<T>;
unsafe impl<T: Sync + Send> Sync for OnceLock<T>;
impl<T: UnwindSafe> UnwindSafe for OnceLock<T>;
```
No longer planned as part of this PR, and moved to the `rust_cell_try` feature gate:
```rust
impl<T> OnceCell<T> {
pub fn get_or_try_init<F, E>(&self, f: F) -> Result<&T, E> where F: FnOnce() -> Result<T, E>;
}
impl<T> OnceLock<T> {
pub fn get_or_try_init<F, E>(&self, f: F) -> Result<&T, E> where F: FnOnce() -> Result<T, E>;
}
```
I am new to this process so would appreciate mentorship wherever needed.
Move `mir::Field` → `abi::FieldIdx`
The first PR for https://github.com/rust-lang/compiler-team/issues/606
This is just the move-and-rename, because it's plenty big already. Future PRs will start using `FieldIdx` more broadly, and concomitantly removing `FieldIdx::new`s.
Support TLS access into dylibs on Windows
This allows access to `#[thread_local]` in upstream dylibs on Windows by introducing a MIR shim to return the address of the thread local. Accesses that go into an upstream dylib will call the MIR shim to get the address of it.
`convert_tls_rvalues` is introduced in `rustc_codegen_ssa` which rewrites MIR TLS accesses to dummy calls which are replaced with calls to the MIR shims when the dummy calls are lowered to backend calls.
A new `dll_tls_export` target option enables this behavior with a `false` value which is set for Windows platforms.
This fixes https://github.com/rust-lang/rust/issues/84933.
As I've been trying to replace a `Vec` with an `IndexVec`, having `last` exist on both but returning very different types makes the transition a bit awkward -- the errors are later, where you get things like "there's no `ty` method on `mir::Field`" rather than a more localized error like "hey, there's no `last` on `IndexVec`".
So I propose renaming `last` to `last_index` to help distinguish `Vec::last`, which returns an element, and `IndexVec::last_index`, which returns an index.
(Similarly, `Iterator::last` also returns an element, not an index.)
The first PR for https://github.com/rust-lang/compiler-team/issues/606
This is just the move-and-rename, because it's plenty big-and-bitrotty already. Future PRs will start using `FieldIdx` more broadly, and concomitantly removing `FieldIdx::new`s.
Thanks to the combination of #108246 and #108442 it could already remove identity transmutes.
With this PR, it can also simplify them to `IntToInt` casts, `Discriminant` reads, or `Field` projections.
Add a builtin `FnPtr` trait that is implemented for all function pointers
r? `@ghost`
Rebased version of https://github.com/rust-lang/rust/pull/99531 (plus adjustments mentioned in the PR).
If perf is happy with this version, I would like to land it, even if the diagnostics fix in 9df8e1befb5031a5bf9d8dfe25170620642d3c59 only works for `FnPtr` specifically, and does not generally improve blanket impls.
Don't elaborate non-obligations into obligations
It's suspicious to elaborate a `PolyTraitRef` or `Predicate` into an `Obligation`, since the former does not have a param-env associated with it, but the latter does. This is a footgun that, while not being misused *currently* in the compiler, easily could be misused by someone less familiar with the elaborator's inner workings.
This PR just changes the API -- ideally, the elaborator wouldn't even have to deal with obligations if we're not elaborating obligations, but that would require a bit more abstraction than I could be bothered with today.
Permit the MIR inliner to inline diverging functions
This heuristic prevents inlining of `hint::unreachable_unchecked`, which in turn makes `Option/Result::unwrap_unchecked` a bad inlining candidate. I looked through the changes to `core`, `alloc`, `std`, and `hashbrown` by hand and they all seem reasonable. Let's see how this looks in perf...
---
Based on rustc-perf it looks like this regresses ctfe-stress, and the cachegrind diff indicates that this regression is in `InterpCx::statement`. I don't know how to do any deeper analysis because that function is _enormous_ in the try toolchain, which has no debuginfo in it. And a local build produces significantly different codegen for that function, even with LTO.
Since structs are always `VariantIdx(0)`, there's a bunch of files where the only reason they had `VariantIdx` or `vec::Idx` imported at all was to get the first variant.
So this uses a constant for that, and adds some doc-comments to `VariantIdx` while I'm there, since it doesn't have any today.
Updates `interpret`, `codegen_ssa`, and `codegen_cranelift` to consume the new cast instead of the intrinsic.
Includes `CastTransmute` for custom MIR building, to be able to test the extra UB.
Detect uninhabited types early in const eval
r? `@RalfJung`
implements https://github.com/rust-lang/rust/pull/108442#discussion_r1143003840
this is a breaking change, as some UB during const eval is now detected instead of silently being ignored. Users can see this and other UB that may cause future breakage with `-Zextra-const-ub-checks` or just by running miri on their code, which sets that flag by default.
move Option::as_slice to intrinsic
````@scottmcm```` suggested on #109095 I use a direct approach of unpacking the operation in MIR lowering, so here's the implementation.
cc ````@nikic```` as this should hopefully unblock #107224 (though perhaps other changes to the prior implementation, which I left for bootstrapping, are needed).
Only clear written-to locals in ConstProp
This aims to revert the regression in https://github.com/rust-lang/rust/pull/108872
Clearing all locals at the end of each bb is very costly.
This PR goes back to the original implementation of recording which locals are modified.
Wrap the whole LocalInfo in ClearCrossCrate.
MIR contains a lot of information about locals. The primary purpose of this information is the quality of borrowck diagnostics.
This PR aims to drop this information after MIR analyses are finished, ie. starting from post-cleanup runtime MIR.
Ensure `ptr::read` gets all the same LLVM `load` metadata that dereferencing does
I was looking into `array::IntoIter` optimization, and noticed that it wasn't annotating the loads with `noundef` for simple things like `array::IntoIter<i32, N>`. Trying to narrow it down, it seems that was because `MaybeUninit::assume_init_read` isn't marking the load as initialized (<https://rust.godbolt.org/z/Mxd8TPTnv>), which is unfortunate since that's basically its reason to exist.
The root cause is that `ptr::read` is currently implemented via the *untyped* `copy_nonoverlapping`, and thus the `load` doesn't get any type-aware metadata: no `noundef`, no `!range`. This PR solves that by lowering `ptr::read(p)` to `copy *p` in MIR, for which the backends already do the right thing.
Fortuitiously, this also improves the IR we give to LLVM for things like `mem::replace`, and fixes a couple of long-standing bugs where `ptr::read` on `Copy` types was worse than `*`ing them.
Zulip conversation: <https://rust-lang.zulipchat.com/#narrow/stream/219381-t-libs/topic/Move.20array.3A.3AIntoIter.20to.20ManuallyDrop/near/341189936>
cc `@erikdesjardins` `@JakobDegen` `@workingjubilee` `@the8472`
Fixes#106369Fixes#73258
Remove `box_syntax`
r? `@Nilstrieb`
This removes the feature `box_syntax`, which allows the use of `box <expr>` to create a Box, and finalises removing use of the feature from the compiler. `box_patterns` (allowing the use of `box <pat>` in a pattern) is unaffected.
It also removes `ast::ExprKind::Box` - the only way to create a 'box' expression now is with the rustc-internal `#[rustc_box]` attribute.
As a temporary measure to help users move away, `box <expr>` now parses the inner expression, and emits a `MachineApplicable` lint to replace it with `Box::new`
Closes#49733
Strengthen state tracking in const-prop
Some/many of the changes are replicated between both the const-prop lint and the const-prop optimization.
Behaviour changes:
- const-prop opt does not give a span to propagated values. This was useless as that span's primary purpose is to diagnose evaluation failure in codegen.
- we remove the `OnlyPropagateInto` mode. It was only used for function arguments, which are better modeled by a write before entry.
- the tracking of assignments and discriminants make clearer that we do nothing in `NoPropagation` mode or on indirect places.
Ensure value is on the on-disk cache before returning from `ensure()`.
The current logic for `ensure()` a query just checks that the node is green in the dependency graph.
However, a lot of places use `ensure()` to prevent the query from being called later. This is the case before stealing a query result.
If the query is actually green but the value is not available in the on-disk cache, `ensure` would return, but a subsequent call to the full query would run the code, and attempt to read from a stolen value.
This PR conforms the query system to the usage by checking whether the queried value is loadable from disk before returning.
Sadly, I can't manage to craft a proper test...
Should fix all instances of "attempted to read from stolen value".
Avoid unnecessary hashing
I noticed some stable hashing being done in a non-incremental build. It turns out that some of this is necessary to compute the crate hash, but some of it is not. Removing the unnecessary hashing is a perf win.
r? `@cjgillot`
I was looking into `array::IntoIter` optimization, and noticed that it wasn't annotating the loads with `noundef` for simple things like `array::IntoIter<i32, N>`.
Turned out to be a more general problem as `MaybeUninit::assume_init_read` isn't marking the load as initialized (<https://rust.godbolt.org/z/Mxd8TPTnv>), which is unfortunate since that's basically its reason to exist.
This PR lowers `ptr::read(p)` to `copy *p` in MIR, which fortuitiously also improves the IR we give to LLVM for things like `mem::replace`.
Rollup of 8 pull requests
Successful merges:
- #108754 (Retry `pred_known_to_hold_modulo_regions` with fulfillment if ambiguous)
- #108759 (1.41.1 supported 32-bit Apple targets)
- #108839 (Canonicalize root var when making response from new solver)
- #108856 (Remove DropAndReplace terminator)
- #108882 (Tweak E0740)
- #108898 (Set `LIBC_CHECK_CFG=1` when building Rust code in bootstrap)
- #108911 (Improve rustdoc-gui/tester.js code a bit)
- #108916 (Remove an unused return value in `rustc_hir_typeck`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Do not consider `&mut *x` as mutating `x` in `CopyProp`
This PR removes an unfortunate overly cautious case from the current implementation.
Found by https://github.com/rust-lang/rust/pull/105274 cc `@saethlin`
Do not implement HashStable for HashSet (MCP 533)
This PR removes all occurrences of `HashSet` in query results, replacing it either with `FxIndexSet` or with `UnordSet`, and then removes the `HashStable` implementation of `HashSet`. This is part of implementing [MCP 533](https://github.com/rust-lang/compiler-team/issues/533), that is, removing the `HashStable` implementations of all collection types with unstable iteration order.
The changes are mostly mechanical. The only place where additional sorting is happening is in Miri's override implementation of the `exported_symbols` query.
The crate hash is needed:
- if debug assertions are enabled, or
- if incr. comp. is enabled, or
- if metadata is being generated, or
- if `-C instrumentation-coverage` is enabled.
This commit avoids computing the crate hash when these conditions are
all false, such as when doing a release build of a binary crate.
It uses `Option` to store the hashes when needed, rather than
computing them on demand, because some of them are needed in multiple
places and computing them on demand would make compilation slower.
The commit also removes `Owner::hash_without_bodies`. There is no
benefit to pre-computing that one, it can just be done in the normal
fashion.
Check for free regions in MIR validation
This turns https://github.com/rust-lang/rust/issues/108720 into a MIR validation failure that will reproduce without debug-assertions enabled.
```
error: internal compiler error: broken MIR in Item(WithOptConstParam { did: DefId(0:296 ~ futures_util[3805]::future::future::remote_handle::{impl#3}::poll), const_param_did: None }) (after pass ScalarReplacementOfAggregates) at bb0[0]:
Free regions in optimized runtime-post-cleanup MIR
--> /home/ben/.cargo/registry/src/github.com-1ecc6299db9ec823/futures-util-0.3.26/src/future/future/remote_handle.rs:96:13
|
96 | let this = self.project();
| ^^^^
```
Desugaring of drop and replace at MIR build
This commit desugars the drop and replace deriving from an
assignment at MIR build, avoiding the construction of the
`DropAndReplace` terminator (which will be removed in a following PR).
In order to retain the same error messages for replaces a new
`DesugaringKind::Replace` variant is introduced.
The changes in the borrowck are also useful for future work in moving drop elaboration
before borrowck, as no `DropAndReplace` would be present there anymore.
Notes on test diffs:
* `tests/ui/borrowck/issue-58776-borrowck-scans-children`: the assignment deriving from the desugaring kills the borrow.
* `tests/ui/async-await/async-fn-size-uninit-locals.rs`, `tests/mir-opt/issue_41110.test.ElaborateDrops.after.mir`, `tests/mir-opt/issue_41888.main.ElaborateDrops.after.mir`: drop elaboration generates (or reads from) a useless drop flag due to an issue with the dataflow analysis. Will be fixed independently by https://github.com/rust-lang/rust/pull/106430.
See https://github.com/rust-lang/rust/pull/104488 for more context
This commit desugars the drop and replace deriving from an
assignment at MIR build, avoiding the construction of the
DropAndReplace terminator (which will be removed in a followign PR)
In order to retain the same error messages for replaces a new
DesugaringKind::Replace variant is introduced.
Unify validity checks into a single query
Previously, there were two queries to check whether a type allows the 0x01 or zeroed bitpattern.
I am planning on adding a further initness to check in #100423, truly uninit for MaybeUninit, which would make this three queries. This seems overkill for such a small feature, so this PR unifies them into one.
I am not entirely happy with the naming and key type and open for improvements.
r? oli-obk
(This is a large commit. The changes to
`compiler/rustc_middle/src/ty/context.rs` are the most important ones.)
The current naming scheme is a mess, with a mix of `_intern_`, `intern_`
and `mk_` prefixes, with little consistency. In particular, in many
cases it's easy to use an iterator interner when a (preferable) slice
interner is available.
The guiding principles of the new naming system:
- No `_intern_` prefixes.
- The `intern_` prefix is for internal operations.
- The `mk_` prefix is for external operations.
- For cases where there is a slice interner and an iterator interner,
the former is `mk_foo` and the latter is `mk_foo_from_iter`.
Also, `slice_interners!` and `direct_interners!` can now be `pub` or
non-`pub`, which helps enforce the internal/external operations
division.
It's not perfect, but I think it's a clear improvement.
The following lists show everything that was renamed.
slice_interners
- const_list
- mk_const_list -> mk_const_list_from_iter
- intern_const_list -> mk_const_list
- substs
- mk_substs -> mk_substs_from_iter
- intern_substs -> mk_substs
- check_substs -> check_and_mk_substs (this is a weird one)
- canonical_var_infos
- intern_canonical_var_infos -> mk_canonical_var_infos
- poly_existential_predicates
- mk_poly_existential_predicates -> mk_poly_existential_predicates_from_iter
- intern_poly_existential_predicates -> mk_poly_existential_predicates
- _intern_poly_existential_predicates -> intern_poly_existential_predicates
- predicates
- mk_predicates -> mk_predicates_from_iter
- intern_predicates -> mk_predicates
- _intern_predicates -> intern_predicates
- projs
- intern_projs -> mk_projs
- place_elems
- mk_place_elems -> mk_place_elems_from_iter
- intern_place_elems -> mk_place_elems
- bound_variable_kinds
- mk_bound_variable_kinds -> mk_bound_variable_kinds_from_iter
- intern_bound_variable_kinds -> mk_bound_variable_kinds
direct_interners
- region
- intern_region (unchanged)
- const
- mk_const_internal -> intern_const
- const_allocation
- intern_const_alloc -> mk_const_alloc
- layout
- intern_layout -> mk_layout
- adt_def
- intern_adt_def -> mk_adt_def_from_data (unusual case, hard to avoid)
- alloc_adt_def(!) -> mk_adt_def
- external_constraints
- intern_external_constraints -> mk_external_constraints
Other
- type_list
- mk_type_list -> mk_type_list_from_iter
- intern_type_list -> mk_type_list
- tup
- mk_tup -> mk_tup_from_iter
- intern_tup -> mk_tup
Previously, there were two queries to check whether a type allows the
0x01 or zeroed bitpattern.
I am planning on adding a further initness to check, truly uninit for
MaybeUninit, which would make this three queries. This seems overkill
for such a small feature, so this PR unifies them into one.
As a part of drop elaboration, we identify dead unwinds, i.e., unwind
edges on a drop terminators which are known to be unreachable, because
there is no need to drop anything.
Previously, the data flow framework was informed about the dead unwinds,
and it assumed those edges are absent from MIR. Unfortunately, the data
flow framework wasn't consistent in maintaining this assumption.
In particular, if a block was reachable only through a dead unwind edge,
its state was propagated to other blocks still. This became an issue in
the context of change removes DropAndReplace terminator, since it
introduces initialization into cleanup blocks.
To avoid this issue, remove unreachable unwind edges before the drop
elaboration, and elaborate only blocks that remain reachable.
Correctly handle aggregates in DataflowConstProp
The previous implementation from https://github.com/rust-lang/rust/pull/107411 flooded target of an aggregate assignment with `Bottom`, corresponding to the `deinit` that the interpreter does.
As a consequence, when assigning `target = Enum::Variant#i(...)` all the `(target as Variant#j)` were at `Bottom` while they should have been `Top`.
This PR replaces that flooding with `Top`.
Aside, it corrects a second bug where the wrong place would be used to assign to enum variant fields, resulting to nothing happening.
Fixes https://github.com/rust-lang/rust/issues/108166
Enable instcombine for mutable reborrows
`instcombine` used to contain this comment, which is no longer accurate because there it is fine to copy `&mut _` in MIR:
```rust
// The dereferenced place must have type `&_`, so that we don't copy `&mut _`.
```
So let's try replacing that check with something much more permissive...
There are several `mk_foo`/`intern_foo` pairs, where the former takes an
iterator and the latter takes a slice. (This naming convention is bad,
but that's a fix for another PR.)
This commit changes several `mk_foo` occurrences into `intern_foo`,
avoiding the need for some `.iter()`/`.into_iter()` calls. Affected
cases:
- mk_type_list
- mk_tup
- mk_substs
- mk_const_list
Switch to `EarlyBinder` for `type_of` query
Part of the work to finish #105779 and implement https://github.com/rust-lang/types-team/issues/78.
Several queries `X` have a `bound_X` variant that wraps the output in `EarlyBinder`. This adds `EarlyBinder` to the return type of the `type_of` query and removes `bound_type_of`.
r? `@lcnr`
Implement partial support for non-lifetime binders
This implements support for non-lifetime binders. It's pretty useless currently, but I wanted to put this up so the implementation can be discussed.
Specifically, this piggybacks off of the late-bound lifetime collection code in `rustc_hir_typeck::collect::lifetimes`. This seems like a necessary step given the fact we don't resolve late-bound regions until this point, and binders are sometimes merged.
Q: I'm not sure if I should go along this route, or try to modify the earlier nameres code to compute the right bound var indices for type and const binders eagerly... If so, I'll need to rename all these queries to something more appropriate (I've done this for `resolve_lifetime::Region` -> `resolve_lifetime::ResolvedArg`)
cc rust-lang/types-team#81
r? `@ghost`
Rollup of 7 pull requests
Successful merges:
- #106347 (More accurate spans for arg removal suggestion)
- #108057 (Prevent some attributes from being merged with others on reexports)
- #108090 (`if $c:expr { Some($r:expr) } else { None }` =>> `$c.then(|| $r)`)
- #108092 (note issue for feature(packed_bundled_libs))
- #108099 (use chars instead of strings where applicable)
- #108115 (Do not ICE on unmet trait alias bounds)
- #108125 (Add new people to the compiletest review rotation)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Optimize `mk_region`
PR #107869 avoiding some interning under `mk_ty` by special-casing `Ty` variants with simple (integer) bodies. This PR does something similar for regions.
r? `@compiler-errors`
Don't ICE in `might_permit_raw_init` if reference is polymorphic
Emitting optimized MIR for a polymorphic function may require computing layout of a type that isn't (yet) known. This happens in the instcombine pass, for example. Let's fail gracefully in that condition.
cc `@saethlin`
fixes#107999
Handle discriminant in DataflowConstProp
cc ``@jachris``
r? ``@JakobDegen``
This PR attempts to extend the DataflowConstProp pass to handle propagation of discriminants. We handle this by adding 2 new variants to `TrackElem`: `TrackElem::Variant` for enum variants and `TrackElem::Discriminant` for the enum discriminant pseudo-place.
The difficulty is that the enum discriminant and enum variants may alias each another. This is the issue of the `Option<NonZeroUsize>` test, which is the equivalent of https://github.com/rust-lang/unsafe-code-guidelines/issues/84 with a direct write.
To handle that, we generalize the flood process to flood all the potentially aliasing places. In particular:
- any write to `(PLACE as Variant)`, either direct or through a projection, floods `(PLACE as OtherVariant)` for all other variants and `discriminant(PLACE)`;
- `SetDiscriminant(PLACE)` floods `(PLACE as Variant)` for each variant.
This implies that flooding is not hierarchical any more, and that an assignment to a non-tracked place may need to flood a tracked place. This is handled by `for_each_aliasing_place` which generalizes `preorder_invoke`.
As we deaggregate enums by putting `SetDiscriminant` last, this allows to propagate the value of the discriminant.
This refactor will allow to make https://github.com/rust-lang/rust/pull/107009 able to handle discriminants too.
Mir-Opt for copying enums with large discrepancies
I have been meaning to make this for quite a while, based off of this [hackmd](https://hackmd.io/`@ft4bxUsFT5CEUBmRKYHr7w/rJM8BBPzD).`
I'm not sure where to put this opt now that I've made it, so I'd appreciate suggestions on that!
It's also one long chain of statements, not sure if there's a more friendly format to make it.
r? `@tmiasko`
I would `r` oli but he's on leave so he suggested I `r` tmiasko or wesleywiser.
Treat Drop as a rmw operation
Previously, a Drop terminator was considered a move in MIR. This commit changes the behavior to only treat Drop as a mutable access to the dropped place.
In order for this change to be correct, we need to guarantee that
1. A dropped value won't be used again
2. Places that appear in a drop won't be used again before a
subsequent initialization.
We can ensure this to be correct at MIR construction because Drop will only be emitted when a variable goes out of scope, thus having:
* (1) as there is no way of reaching the old value. drop-elaboration
will also remove any uninitialized drop.
* (2) as the place can't be named following the end of the scope.
However, the initialization status, previously tracked by moves, should also be tied to the execution of a Drop, hence the additional logic in the dataflow analyses.
From discussion in [this thread](https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/.60DROP.60.20to.20.60DROP_IF.60.20compiler-team.23558), originating from https://github.com/rust-lang/compiler-team/issues/558.
See also https://github.com/rust-lang/rust/pull/104488#discussion_r1085556010
Turn projections into copies in CopyProp.
The current implementation can leave behind projections that are moved out several times.
This PR widens the check to turn such moves into copies: a move out of a projection of a copy is equivalent to a copy of the original projection.
There is a distinction between running this on wasm and i686, even though they should be
identical. This technically is not _incorrect_, it's just an unexpected difference, which is
worth investigating, but not for correctness.
Remove both StorageLive and StorageDead in CopyProp.
Fixes https://github.com/rust-lang/rust/issues/107511https://github.com/rust-lang/rust/pull/106908 removed StorageDead without the accompanying StorageLive. In loops, execution would see repeated StorageLive, without any StorageDead, which is UB.
So when removing storage statements, we have to remove both StorageLive and StorageDead.
~I also added a MIR validation pass for StorageLive. It may be a bit overzealous.~
Currently, deriving on packed structs has some non-trivial limitations,
related to the fact that taking references on unaligned fields is UB.
The current approach to field accesses in derived code:
- Normal case: `&self.0`
- In a packed struct that derives `Copy`: `&{self.0}`
- In a packed struct that doesn't derive `Copy`: `&self.0`
Plus, we disallow deriving any builtin traits other than `Default` for any
packed generic type, because it's possible that there might be
misaligned fields. This is a fairly broad restriction.
Plus, we disallow deriving any builtin traits other than `Default` for most
packed types that don't derive `Copy`. (The exceptions are those where the
alignments inherently satisfy the packing, e.g. in a type with
`repr(packed(N))` where all the fields have alignments of `N` or less
anyway. Such types are pretty strange, because the `packed` attribute is
not having any effect.)
This commit introduces a new, simpler approach to field accesses:
- Normal case: `&self.0`
- In a packed struct: `&{self.0}`
In the latter case, this requires that all fields impl `Copy`, which is
a new restriction. This means that the following example compiles under
the old approach and doesn't compile under the new approach.
```
#[derive(Debug)]
struct NonCopy(u8);
#[derive(Debug)
#[repr(packed)]
struct MyType(NonCopy);
```
(Note that the old approach's support for cases like this was brittle.
Changing the `u8` to a `u16` would be enough to stop it working. So not
much capability is lost here.)
However, the other constraints from the old rules are removed. We can now
derive builtin traits for packed generic structs like this:
```
trait Trait { type A; }
#[derive(Hash)]
#[repr(packed)]
pub struct Foo<T: Trait>(T, T::A);
```
To allow this, we add a `T: Copy` bound in the derived impl and a `T::A:
Copy` bound in where clauses. So `T` and `T::A` must impl `Copy`.
We can now also derive builtin traits for packed structs that don't derive
`Copy`, so long as the fields impl `Copy`:
```
#[derive(Hash)]
#[repr(packed)]
pub struct Foo(u32);
```
This includes types that hand-impl `Copy` rather than deriving it, such as the
following, that show up in winapi-0.2:
```
#[derive(Clone)]
#[repr(packed)]
struct MyType(i32);
impl Copy for MyType {}
```
The new approach is simpler to understand and implement, and it avoids
the need for the `unsafe_derive_on_repr_packed` check.
One exception is required for backwards-compatibility: we allow `[u8]`
fields for now. There is a new lint for this,
`byte_slice_in_packed_struct_with_derive`.
Previously, a Drop terminator was considered a move in MIR.
This commit changes the behavior to only treat Drop as a mutable
access to the dropped place.
In order for this change to be correct, we need to guarantee that
a) A dropped value won't be used again
b) Places that appear in a drop won't be used again before a
subsequent initialization.
We can ensure this to be correct at MIR construction because Drop
will only be emitted when a variable goes out of scope,
thus having:
(a) as there is no way of reaching the old value. drop-elaboration
will also remove any uninitialized drop.
(b) as the place can't be named following the end of the scope.
However, the initialization status, previously tracked by moves,
should also be tied to the execution of a Drop, hence the
additional logic in the dataflow analyses.
Implement simple CopyPropagation based on SSA analysis
This PR extracts the "copy propagation" logic from https://github.com/rust-lang/rust/pull/106285.
MIR may produce chains of assignment between locals, like `_x = move? _y`.
This PR attempts to remove such chains by unifying locals.
The current implementation is a bit overzealous in turning moves into copies, and in removing storage statements.
Use stable metric for const eval limit instead of current terminator-based logic
This patch adds a `MirPass` that inserts a new MIR instruction `ConstEvalCounter` to any loops and function calls in the CFG. This instruction is used during Const Eval to count against the `const_eval_limit`, and emit the `StepLimitReached` error, replacing the current logic which uses Terminators only.
The new method of counting loops and function calls should be more stable across compiler versions (i.e., not cause crates that compiled successfully before, to no longer compile when changes to the MIR generation/optimization are made).
Also see: #103877
InstCombine away intrinsic validity assertions
This optimization (currently) fires 246 times on the standard library. It seems to fire hardly at all on the big crates in the benchmark suite. Interesting.
This patch adds a `MirPass` that tracks the number of back-edges and
function calls in the CFG, adds a new MIR instruction to increment a
counter every time they are encountered during Const Eval, and emit a
warning if a configured limit is breached.
There is a number of APIs that answer dominance queries. Previously they
were named either "dominates" or "is_dominated_by". Consistently use the
"dominates" form.
No functional changes.
- Eliminates all the `get_context` calls that async lowering created.
- Replace all `Local` `ResumeTy` types with `&mut Context<'_>`.
The `Local`s that have their types replaced are:
- The `resume` argument itself.
- The argument to `get_context`.
- The yielded value of a `yield`.
The `ResumeTy` hides a `&mut Context<'_>` behind an unsafe raw pointer, and the
`get_context` function is being used to convert that back to a `&mut Context<'_>`.
Ideally the async lowering would not use the `ResumeTy`/`get_context` indirection,
but rather directly use `&mut Context<'_>`, however that would currently
lead to higher-kinded lifetime errors.
See <https://github.com/rust-lang/rust/issues/105501>.
The async lowering step and the type / lifetime inference / checking are
still using the `ResumeTy` indirection for the time being, and that indirection
is removed here. After this transform, the generator body only knows about `&mut Context<'_>`.
Always permit ConstProp to exploit arithmetic identities
Fixes https://github.com/rust-lang/rust/issues/72751
Initially, I thought I would need to enable operand propagation then do something else, but actually https://github.com/rust-lang/rust/pull/74491 already has the fix for the issue in question! It looks like this optimization was put under MIR opt level 3 due to possible soundness/stability implications, then demoted further to MIR opt level 4 when MIR opt level 2 became associated with `--release`.
Perhaps in the past we were doing CTFE on optimized MIR? We aren't anymore, so this optimization has no stability implications.
r? `@oli-obk`
Improve syntax of `newtype_index`
This makes it more like proper Rust and also makes the implementation a lot simpler.
Mostly just turns weird flags in the body into proper attributes.
It should probably also be converted to an attribute macro instead of function-like, but that can be done in a future PR.
Remove the `..` from the body, only a few invocations used it and it's
inconsistent with rust syntax.
Use `;` instead of `,` between consts. As the Rust syntax gods inteded.
This removes the `custom` format functionality as its only user was
trivially migrated to using a normal format.
If a new use case for a custom formatting impl pops up, you can add it
back.
Custom MIR: Many more improvements
Commits are each atomic changes, best reviewed one at a time, with the exception that the last commit includes all the documentation.
### First commit
Unsafetyck was not correctly disabled before for `dialect = "built"` custom MIR. This is fixed and a regression test is added.
### Second commit
Implements `Discriminant`, `SetDiscriminant`, and `SwitchInt`.
### Third commit
Implements indexing, field, and variant projections.
### Fourth commit
Documents the previous commits and everything else.
There is some amount of weirdness here due to having to beat Rust syntax into cooperating with MIR concepts, but it hopefully should not be too much. All of it is documented.
r? `@oli-obk`
always check alignment during CTFE
We originally disabled alignment checks because they got in the way -- there are some things we do with the interpreter during CTFE which does not correspond to actually running user-written code, but is purely administrative, and we didn't want alignment checks there, so we just disabled them entirely. But with `-Zextra-const-ub-checks` we anyway had to figure out how to disable those alignment checks while doing checks in regular code. So now it is easy to enable CTFE alignment checking by default. Let's see what the perf consequences of that are.
r? `@oli-obk`
Various cleanups to dest prop
This makes fixing the issues identified in #105577 easier. A couple changes
- Use an enum with names instead of a bool
- Only call `remove_candidates_if` from one place instead of two. Doing it from two places is far too fragile, since any divergence in the behavior between those callsites is likely to be unsound.
- Remove `is_constant`. Right now we only merge locals, so this doesn't do anything, and the logic would be wrong if it did.
r? `@tmiasko`
Combine `ty::Projection` and `ty::Opaque` into `ty::Alias`
Implements https://github.com/rust-lang/types-team/issues/79.
This PR consolidates `ty::Projection` and `ty::Opaque` into a single `ty::Alias`, with an `AliasKind` and `AliasTy` type (renamed from `ty::ProjectionTy`, which is the inner data of `ty::Projection`) defined as so:
```
enum AliasKind {
Projection,
Opaque,
}
struct AliasTy<'tcx> {
def_id: DefId,
substs: SubstsRef<'tcx>,
}
```
Since we don't have access to `TyCtxt` in type flags computation, and because repeatedly calling `DefKind` on the def-id is expensive, these two types are distinguished with `ty::AliasKind`, conveniently glob-imported into `ty::{Projection, Opaque}`. For example:
```diff
match ty.kind() {
- ty::Opaque(..) =>
+ ty::Alias(ty::Opaque, ..) => {}
_ => {}
}
```
This PR also consolidates match arms that treated `ty::Opaque` and `ty::Projection` identically.
r? `@ghost`
Don't require owned data in `MaybeStorageLive`
Small improvement that avoids a clone. I don't expect this to have any noticeable perf effects, but better to have it than not to.
r? ``@tmiasko``
compiler: remove unnecessary imports and qualified paths
Some of these imports were necessary before Edition 2021, others were already in the prelude.
I hope it's fine that this PR is so spread-out across files :/
make retagging work even with 'unstable' places
This is based on top of https://github.com/rust-lang/rust/pull/105301. Only the last two commits are new.
While investigating https://github.com/rust-lang/unsafe-code-guidelines/issues/381 I realized that we would have caught this issue much earlier if the add_retag pass wouldn't bail out on assignments of the form `*ptr = ...`.
So this PR changes our retag strategy:
- When a new reference is created via `Rvalue::Ref` (or a raw ptr via `Rvalue::AddressOf`), we do the retagging as part of just executing that address-taking operation.
- For everything else, we still insert retags -- these retags basically serve to ensure that references stored in local variables (and their fields) are always freshly tagged, so skipping this for assignments like `*ptr = ...` is less egregious.
r? ```@oli-obk```
Re-enable removal of ZST writes to unions
This was previously disabled because Miri was lazily allocating unsized locals. But we aren't doing that anymore since https://github.com/rust-lang/rust/pull/98831, so we can have this optimization back.
feed resolver_for_lowering instead of storing it in a field
r? `@cjgillot`
opening this as
* a discussion for `no_hash` + `feedable` queries. I think we'll want those, but I don't quite understand why they are rejected beyond a double check of the stable hashes for situations where the query is fed but also read from incremental caches.
* and a discussion on removing all untracked fields from TyCtxt and setting it up so that they are fed queries instead
Disable top down MIR inlining
The current MIR inliner has exponential behavior in some cases: <https://godbolt.org/z/7jnWah4fE>. The cause of this is top-down inlining, where we repeatedly do inlining like `call_a() => { call_b(); call_b(); }`. Each decision on its own seems to make sense, but the result is exponential.
Disabling top-down inlining fundamentally prevents this. Each call site in the original, unoptimized source code is now considered for inlining exactly one time, which means that the total growth in MIR size is limited to number of call sites * inlining threshold.
Top down inlining may be worth re-introducing at some point, but it needs to be accompanied with a principled way to prevent this kind of behavior.
This fixes a number of correctness issues from the previous version. Additionally, we use a new
strategy which has much better performance charactersitics and also finds more opportunities to
apply the optimization.
Refine `instruction_set` MIR inline rules
Previously an exact match of the `instruction_set` attribute was required for an MIR inline to be considered. This change checks for an exact match *only* if the callee sets an `instruction_set` in the first place. When the callee does not declare an instruction set then it is considered to be platform agnostic code and it's allowed to be inline'd into the caller.
cc ``@oli-obk``
[Edit] Zulip Context: https://rust-lang.zulipchat.com/#narrow/stream/189540-t-compiler.2Fwg-mir-opt/topic/What.20exactly.20does.20the.20MIR.20optimizer.20do.3F
Previously an exact match of the `instruction_set` attribute was required for an MIR inline to be considered. This change checks for an exact match *only* if the callee sets an `instruction_set` in the first place. When the callee does not declare an instruction set then it is considered to be platform agnostic code and it's allowed to be inline'd into the caller.
Make rustc_target usable outside of rustc
I'm working on showing type size in rust-analyzer (https://github.com/rust-lang/rust-analyzer/pull/13490) and I currently copied rustc code inside rust-analyzer, which works, but is bad. With this change, I would become able to use `rustc_target` and `rustc_index` directly in r-a, reducing the amount of copy needed.
This PR contains some feature flag to put nightly features behind them to make crates buildable on the stable compiler + makes layout related types generic over index type + removes interning of nested layouts.
Previously, async constructs would be lowered to "normal" generators,
with an additional `from_generator` / `GenFuture` shim in between to
convert from `Generator` to `Future`.
The compiler will now special-case these generators internally so that
async constructs will *directly* implement `Future` without the need
to go through the `from_generator` / `GenFuture` shim.
The primary motivation for this change was hiding this implementation
detail in stack traces and debuginfo, but it can in theory also help
the optimizer as there is less abstractions to see through.
nll: correctly deal with bivariance
fixes#104409
when in a bivariant context, relating stuff should always trivially succeed. Also changes the mir validator to correctly deal with higher ranked regions.
r? types cc ``@RalfJung``
Record `LocalDefId` in HIR nodes instead of a side table
This is part of an attempt to remove the `HirId -> LocalDefId` table from HIR.
This attempt is a prerequisite to creation of `LocalDefId` after HIR lowering (https://github.com/rust-lang/rust/pull/96840), by controlling how `def_id` information is accessed.
This first part adds the information to HIR nodes themselves instead of a table.
The second part is https://github.com/rust-lang/rust/pull/103902
The third part will be to make `hir::Visitor::visit_fn` take a `LocalDefId` as last parameter.
The fourth part will be to completely remove the side table.
Perform simple scalar replacement of aggregates (SROA) MIR opt
This is a re-open of https://github.com/rust-lang/rust/pull/85796
I copied the debuginfo implementation (first commit) from `@eddyb's` own SROA PR.
This pass replaces plain field accesses by simple locals when possible.
To be eligible, the replaced locals:
- must not be enums or unions;
- must not be used whole;
- must not have their address taken.
The storage and deinit statements are duplicated on each created local.
cc `@tmiasko` who reviewed the former version of this PR.
interpret: support for per-byte provenance
Also factors the provenance map into its own module.
The third commit does the same for the init mask. I can move it in a separate PR if you prefer.
Fixes https://github.com/rust-lang/miri/issues/2181
r? `@oli-obk`
Add new MIR constant propagation based on dataflow analysis
The current constant propagation in `rustc_mir_transform/src/const_prop.rs` fails to handle many cases that would be expected from a constant propagation optimization. For example:
```rust
let x = if true { 0 } else { 0 };
```
This pull request adds a new constant propagation MIR optimization pass based on the existing dataflow analysis framework. Since most of the analysis is not unique to constant propagation, a generic framework has been extracted. It works on top of the existing framework and could be reused for other optimzations.
Closes#80038. Closes#81605.
## Todo
### Essential
- [x] [Writes to inactive enum variants](https://github.com/rust-lang/rust/pull/101168#pullrequestreview-1089493974). Resolved by rejecting the registration of places with downcast projections for now. Could be improved by flooding other variants if mutable access to a variant is observed.
- [X] Handle [`StatementKind::CopyNonOverlapping`](https://github.com/rust-lang/rust/pull/101168#discussion_r957774914). Resolved by flooding the destination.
- [x] Handle `UnsafeCell` / `!Freeze` correctly.
- [X] Overflow propagation of `CheckedBinaryOp`: Decided to not propagate if overflow flag is `true` (`false` will still be propagated)
- [x] More documentation in general.
- [x] Arguments for correctness, documentation of necessary assumptions.
- [x] Better performance, or alternatively, require `-Zmir-opt-level=3` for now.
### Extra
- [x] Add explicit unreachability, i.e. upgrading the lattice from $\mathbb{P} \to \mathbb{V}$ to $\set{\bot} \cup (\mathbb{P} \to \mathbb{V})$.
- [x] Use storage statements to improve precision.
- [ ] Consider opening issue for duplicate diagnostics: https://github.com/rust-lang/rust/pull/101168#issuecomment-1276609950
- [ ] Flood moved-from places with $\bot$ (requires some changes for places with tracked projections).
- [ ] Add downcast projections back in.
- [ ] [Algebraic simplifications](https://github.com/rust-lang/rust/pull/101168#discussion_r957967878) (possibly with a shared API; done by old const prop).
- [ ] Propagation through slices / arrays.
- [ ] Find other optimizations that are done by old `const_prop.rs`, but not by this one.
Add mir building test directory
The first commit renames `mir-map.0` mir dumps to `built.after` dumps. I am happy to drop this commit if someone can explain the origin of the name.
The second commit moves a bunch of mir building tests into their own directory. I did my best to make sure that all of these tests are actually testing mir building, and not just incidentally using `built.after`
r? ``@oli-obk``
indirect immutable freeze by-value function parameters.
Right now, `rustc` only examines function signatures and the platform ABI when
determining the LLVM attributes to apply to parameters. This results in missed
optimizations, because there are some attributes that can be determined via
analysis of the MIR making up the function body. In particular, `readonly`
could be applied to most indirectly-passed by-value function arguments
(specifically, those that are freeze and are observed not to be mutated), but
it currently is not.
This patch introduces the machinery that allows `rustc` to determine those
attributes. It consists of a query, `deduced_param_attrs`, that, when
evaluated, analyzes the MIR of the function to determine supplementary
attributes. The results of this query for each function are written into the
crate metadata so that the deduced parameter attributes can be applied to
cross-crate functions. In this patch, we simply check the parameter for
mutations to determine whether the `readonly` attribute should be applied to
parameters that are indirect immutable freeze by-value. More attributes could
conceivably be deduced in the future: `nocapture` and `noalias` come to mind.
Adding `readonly` to indirect function parameters where applicable enables some
potential optimizations in LLVM that are discussed in [issue 103103] and [PR
103070] around avoiding stack-to-stack memory copies that appear in functions
like `core::fmt::Write::write_fmt` and `core::panicking::assert_failed`. These
functions pass a large structure unchanged by value to a subfunction that also
doesn't mutate it. Since the structure in this case is passed as an indirect
parameter, it's a pointer from LLVM's perspective. As a result, the
intermediate copy of the structure that our codegen emits could be optimized
away by LLVM's MemCpyOptimizer if it knew that the pointer is `readonly
nocapture noalias` in both the caller and callee. We already pass `nocapture
noalias`, but we're missing `readonly`, as we can't determine whether a
by-value parameter is mutated by examining the signature in Rust. I didn't have
much success with having LLVM infer the `readonly` attribute, even with fat
LTO; it seems that deducing it at the MIR level is necessary.
No large benefits should be expected from this optimization *now*; LLVM needs
some changes (discussed in [PR 103070]) to more aggressively use the `noalias
nocapture readonly` combination in its alias analysis. I have some LLVM patches
for these optimizations and have had them looked over. With all the patches
applied locally, I enabled LLVM to remove all the `memcpy`s from the following
code:
```rust
fn main() {
println!("Hello {}", 3);
}
```
which is a significant codegen improvement over the status quo. I expect that
if this optimization kicks in in multiple places even for such a simple
program, then it will apply to Rust code all over the place.
[issue 103103]: https://github.com/rust-lang/rust/issues/103103
[PR 103070]: https://github.com/rust-lang/rust/pull/103070
Fix MIR inlining of asm_unwind
The MIR inlining currently doesn't handle inline asm's unwind edge correctly.
This code will cause ICE:
```rust
struct D;
impl Drop for D {
fn drop(&mut self) {}
}
#[inline(always)]
fn foo() {
let _d = D;
unsafe { std::arch::asm!("", options(may_unwind)) };
}
pub fn main() {
foo();
}
```
This PR fixes this issue. I also take the opportunity to extract common code into a method.
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
Rework definition of MIR phases to more closely reflect semantic concerns
Implements most of rust-lang/compiler-team#522 .
I tried my best to restrict this PR to the "core" parts of the MCP. In other words, this includes just enough changes to make the new definition of `MirPhase` make sense. That means there are a couple of FIXMEs lying around. Depending on what reviewers prefer, I can either fix them in this PR or send follow up PRs. There are also a couple other refactorings of the `rustc_mir_transform/src/lib.rs` file that I want to do in follow ups that I didn't leave explicit FIXMEs for.
Revert let_chains stabilization
This is the revert against master, the beta revert was already done in #100538.
Bumps the stage0 compiler which already has it reverted.
remove an ineffective check in const_prop
Based on https://github.com/rust-lang/rust/pull/100043, only the last two commits are new.
ConstProp has a special check when reading from a local that prevents reading uninit locals. However, if that local flows into `force_allocation`, then no check fires and evaluation proceeds. So this check is not really effective at preventing accesses to uninit locals.
With https://github.com/rust-lang/rust/pull/100043, `read_immediate` and friends always fail when reading uninit locals, so I don't see why ConstProp would need a separate check. Thus I propose we remove it. This is needed to be able to do https://github.com/rust-lang/rust/pull/100085.
Use the declaration's SourceInfo for FnEntry retags, not the outermost
This addresses a long-standing `// FIXME` in the pass that adds retags.
The changes to Miri's UI tests will look like this:
```
--> $DIR/aliasing_mut1.rs:LL:CC
|
LL | pub fn safe(_x: &mut i32, _y: &mut i32) {}
< | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ not granting access to tag <TAG> because incompatible item [Unique for <TAG>] is protected by call ID
> | ^^ not granting access to tag <TAG> because incompatible item [Unique for <TAG>] is protected by call ID
|
```
r? ````@RalfJung````
Replace `Body::basic_blocks()` with field access
Since the refactoring in #98930, it is possible to borrow the basic blocks
independently from other parts of MIR by accessing the `basic_blocks` field
directly.
Replace unnecessary `Body::basic_blocks()` method with a direct field access,
which has an additional benefit of borrowing the basic blocks only.
Elaborate all box dereferences in `ElaborateBoxDerefs`
so that it is the only pass responsible for elaboration, instead of
splitting this responsibility between the `StateTransform` and
`ElaborateBoxDerefs`.
so that it is the only pass responsible for elaboration, instead of
splitting this responsibility between the `StateTransform` and
`ElaborateBoxDerefs`.
Check projection types before inlining MIR
Fixes https://github.com/rust-lang/rust/issues/100550
I'm very unhappy with this solution, having to duplicate MIR validation code, but at least it removes the ICE.
r? `@compiler-errors`
Elide superfluous storage markers
Follow the existing strategy of omitting the storage markers for temporaries
introduced for internal usage when elaborating derefs and deref projections.
Those temporaries are simple scalars which are used immediately after being
defined and never have their address taken. There is no benefit from storage
markers from either liveness analysis or code generation perspective.
