Update documentation to use `from()` to initialize `HashMap`s and `BTreeMap`s
As of Rust 1.56, `HashMap` and `BTreeMap` both have associated `from()` functions. I think using these in the documentation cleans things up a bit. It allows us to remove some of the `mut`s and avoids the Initialize-Then-Modify anti-pattern.
replace vec::Drain drop loops with drop_in_place
The `Drain::drop` implementation came up in https://github.com/rust-lang/rust/pull/82185#issuecomment-789584796 as potentially interfering with other optimization work due its widespread use somewhere in `println!`
`@rustbot` label T-libs-impl
Suggest try_reserve in try_reserve_exact
During developing #91529 , I found that `try_reserve_exact` suggests `reserve` for further insertions. I think it's a mistake by copy&paste, `try_reserve` is better here.
Implement VecDeque::retain_mut
Part of https://github.com/rust-lang/rust/issues/90829.
In https://github.com/rust-lang/rust/pull/90772, someone suggested that `retain_mut` should also be implemented on `VecDeque`. I think that it follows the same logic (coherency). So first: is it ok? Second: should I create a new feature for it or can we put it into the same one?
r? `@joshtriplett`
For users looking at documentation through IDE popups, this gives them
relevant information rather than the generic trait documentation wording
“Performs the conversion”. For users reading the documentation for a
specific type for any reason, this informs them when the conversion may
allocate or copy significant memory versus when it is always a move or
cheap copy.
Notes on specific cases:
* The new documentation for `From<T> for T` explains that it is not a
conversion at all.
* Also documented `impl<T, U> Into<U> for T where U: From<T>`, the other
central blanket implementation of conversion.
* I did not add documentation to conversions of a specific error type to
a more general error type.
* I did not add documentation to unstable code.
This change was prepared by searching for the text "From<... for" and so
may have missed some cases that for whatever reason did not match. I
also looked for `Into` impls but did not find any worth documenting by
the above criteria.
Add `into_iter().filter().collect()` as a comparison point since it was reported to be faster than `retain`.
Remove clone inside benchmark loop to reduce allocator noise.
Rollup of 10 pull requests
Successful merges:
- #88906 (Implement write() method for Box<MaybeUninit<T>>)
- #90269 (Make `Option::expect` unstably const)
- #90854 (Type can be unsized and uninhabited)
- #91170 (rustdoc: preload fonts)
- #91273 (Fix ICE #91268 by checking that the snippet ends with a `)`)
- #91381 (Android: -ldl must appear after -lgcc when linking)
- #91453 (Document Windows TLS drop behaviour)
- #91462 (Use try_normalize_erasing_regions in needs_drop)
- #91474 (suppress warning about set_errno being unused on DragonFly)
- #91483 (Sync rustfmt subtree)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Implement write() method for Box<MaybeUninit<T>>
This adds method similar to `MaybeUninit::write` main difference being
it returns owned `Box`. This can be used to elide copy from stack
safely, however it's not currently tested that the optimization actually
occurs.
Analogous methods are not provided for `Rc` and `Arc` as those need to
handle the possibility of sharing. Some version of them may be added in
the future.
This was discussed in #63291 which this change extends.
Remove unnecessary check in VecDeque::grow
All callers already check that the buffer is full before calling
`grow()`. This is where it makes the most sense, since `grow()` is
`inline(never)` and we don't want to pay for a function call just for
that check.
It could also be argued that it would be correct to call `grow()` even
if the buffer wasn't full yet.
This change breaks no code since `grow()` is not `pub`.
This adds method similar to `MaybeUninit::write` main difference being
it returns owned `Box`. This can be used to elide copy from stack
safely, however it's not currently tested that the optimization actually
occurs.
Analogous methods are not provided for `Rc` and `Arc` as those need to
handle the possibility of sharing. Some version of them may be added in
the future.
This was discussed in #63291 which this change extends.
Introduce `RawVec::reserve_for_push`.
If `Vec::push`'s capacity check fails it calls `RawVec::reserve`, which
then also does a capacity check.
This commit introduces `reserve_for_push` which skips the redundant
capacity check, for some slight compile time speed-ups.
I tried lots of minor variations on this, e.g. different inlining
attributes. This was the best one I could find.
r? `@ghost`
All callers already check that the buffer is full before calling
`grow()`. This is where it makes the most sense, since `grow()` is
`inline(never)` and we don't want to pay for a function call just for
that check.
It could also be argued that it would be correct to call `grow()` even
if the buffer wasn't full yet.
This change breaks no code since `grow()` is not `pub`.
If `Vec::push`'s capacity check fails it calls `RawVec::reserve`, which
then also does a capacity check.
This commit introduces `reserve_for_push` which skips the redundant
capacity check, for some slight compile time speed-ups.
I tried lots of minor variations on this, e.g. different inlining
attributes. This was the best one I could find.
Eliminate an unreachable codepath from String::from_utf8_lossy
`Utf8Lossy`'s `Iterator` implementation ensures that only the **final** chunk has an empty slice for `broken`:
dd549dcab4/library/core/src/str/lossy.rs (L46-L47)
Thus the only way the **first** chunk could have an empty `broken` is if it is the **final** chunk, i.e. there is only one chunk total. And the only way that there could be one chunk total with an empty `broken` is if the whole input is valid utf8 and non-empty.
That condition has already been handled by an early return, so at the point that the first `REPLACEMENT` is being pushed, it's impossible for `first_broken` to be empty.
Fix Iterator::advance_by contract inconsistency
The `advance_by(n)` docs state that in the error case `Err(k)` that k is always less than n.
It also states that `advance_by(0)` may return `Err(0)` to indicate an exhausted iterator.
These statements are inconsistent.
Since only one implementation (Skip) actually made use of that I changed it to return Ok(()) in that case too.
While adding some tests I also found a bug in `Take::advance_back_by`.
Utf8Lossy's Iterator implementation ensures that only the final chunk
has an empty slice for broken. Thus the only way the first chunk could
have an empty broken is if it is the final chunk, i.e. there is only one
chunk total. And the only way that there could be one chunk total is if
the whole input is valid utf8 and non-empty. That condition has already
been handled by an early return, so at the point that the first
REPLACEMENT is being pushed, it's impossible for first_broken to be
empty.
Mark `Arc::from_inner` / `Rc::from_inner` as unsafe
While it's an internal function, it is easy to create invalid Arc/Rcs to
a dangling pointer with it.
Fixes https://github.com/rust-lang/rust/issues/89740
The `advance_by(n)` docs state that in the error case `Err(k)` that k is always less than n.
It also states that `advance_by(0)` may return `Err(0)` to indicate an exhausted iterator.
These statements are inconsistent.
Since only one implementation (Skip) actually made use of that I changed it to return Ok(()) in that case too.
While adding some tests I also found a bug in `Take::advance_back_by`.
This commit makes the following functions from `core::str` `const fn`:
- `from_utf8[_mut]` (`feature(const_str_from_utf8)`)
- `from_utf8_unchecked_mut` (`feature(const_str_from_utf8_unchecked_mut)`)
- `Utf8Error::{valid_up_to,error_len}` (`feature(const_str_from_utf8)`)
Add Vec::retain_mut
This is to continue the discussion started in #83218.
Original comment was:
> Take 2 of #34265, since I needed this today.
The reason I think why we should add `retain_mut` is for coherency and for discoverability. For example we have `chunks` and `chunks_mut` or `get` and `get_mut` or `iter` and `iter_mut`, etc. When looking for mutable `retain`, I would expect `retain_mut` to exist. It took me a while to find out about `drain_filter`. So even if it provides an API close to `drain_filter`, just for the discoverability, I think it's worth it.
cc ``````@m-ou-se`````` ``````@jonas-schievink`````` ``````@Mark-Simulacrum``````
Optimize BinaryHeap::extend from Vec
This improves the performance of extending `BinaryHeap`s from vectors directly. Future work may involve extending this optimization to other, similar, cases where the length of the added elements is well-known, but this is not yet done in this PR.
Make RawVec private to alloc
RawVec was previously exposed for compiler-internal use (libarena specifically) in 1acbb0a935
Since it is unstable, doc-hidden and has no associated tracking issue it was never meant for public use. And since
it is no longer used outside alloc itself it can be made private again.
Also remove some functions that are dead due to lack of internal users.
Better document `Box` and `alloc::alloc::box_free` connection
The internal `alloc::alloc::box_free` function requires that its signature matches the `owned_box` struct's declaration, but previously that connection was only documented on the `box_free` function.
This PR makes the documentation two-way to help anyone making theoretical changes to `Box` to see the connection, since changes are more likely to originate from `Box`.
RawVec was previously exposed for compiler-internal use (libarena specifically) in 1acbb0a935
Since it is unstable, doc-hidden and has no associated tracking issue it was never meant for public use. And since
it is no longer used outside alloc itself it can be made private again.
Also remove some functions that are dead due to lack of internal users.
Add #[must_use] to alloc functions that would leak memory
As [requested](https://github.com/rust-lang/rust/pull/89899#issuecomment-955600779) by `@joshtriplett.`
> Please do go ahead and add the ones whose only legitimate use for ignoring the return value is leaking memory. (In a separate PR please.) I think it's sufficiently error-prone to call something like alloc and ignore the result that it's legitimate to require `let _ =` for that.
I added `realloc` myself. Clippy ignored it because of its `mut` argument.
```rust
alloc/src/alloc.rs:123:1 alloc unsafe fn realloc(ptr: *mut u8, layout: Layout, new_size: usize) -> *mut u8;
```
Parent issue: #89692
r? `@joshtriplett`
Add #[must_use] to remaining core functions
I've run out of compelling reasons to group functions together across crates so I'm just going to go module-by-module. This is everything remaining from the `core` crate.
Ignored by clippy for reasons unknown:
```rust
core::alloc::Layout unsafe fn for_value_raw<T: ?Sized>(t: *const T) -> Self;
core::any const fn type_name_of_val<T: ?Sized>(_val: &T) -> &'static str;
```
Ignored by clippy because of `mut`:
```rust
str fn split_at_mut(&mut self, mid: usize) -> (&mut str, &mut str);
```
<del>
Ignored by clippy presumably because a caller might want `f` called for side effects. That seems like a bad usage of `map` to me.
```rust
core::cell::Ref<'b, T> fn map<U: ?Sized, F>(orig: Ref<'b, T>, f: F) -> Ref<'b, T>;
core::cell::Ref<'b, T> fn map_split<U: ?Sized, V: ?Sized, F>(orig: Ref<'b, T>, f: F) -> (Ref<'b, U>, Ref<'b, V>);
```
</del>
Parent issue: #89692
r? ```@joshtriplett```
Add #[must_use] to expensive computations
The unifying theme for this commit is weak, admittedly. I put together a list of "expensive" functions when I originally proposed this whole effort, but nobody's cared about that criterion. Still, it's a decent way to bite off a not-too-big chunk of work.
Given the grab bag nature of this commit, the messages I used vary quite a bit. I'm open to wording changes.
For some reason clippy flagged four `BTreeSet` methods but didn't say boo about equivalent ones on `HashSet`. I stared at them for a while but I can't figure out the difference so I added the `HashSet` ones in.
```rust
// Flagged by clippy.
alloc::collections::btree_set::BTreeSet<T> fn difference<'a>(&'a self, other: &'a BTreeSet<T>) -> Difference<'a, T>;
alloc::collections::btree_set::BTreeSet<T> fn symmetric_difference<'a>(&'a self, other: &'a BTreeSet<T>) -> SymmetricDifference<'a, T>
alloc::collections::btree_set::BTreeSet<T> fn intersection<'a>(&'a self, other: &'a BTreeSet<T>) -> Intersection<'a, T>;
alloc::collections::btree_set::BTreeSet<T> fn union<'a>(&'a self, other: &'a BTreeSet<T>) -> Union<'a, T>;
// Ignored by clippy, but not by me.
std::collections::HashSet<T, S> fn difference<'a>(&'a self, other: &'a HashSet<T, S>) -> Difference<'a, T, S>;
std::collections::HashSet<T, S> fn symmetric_difference<'a>(&'a self, other: &'a HashSet<T, S>) -> SymmetricDifference<'a, T, S>
std::collections::HashSet<T, S> fn intersection<'a>(&'a self, other: &'a HashSet<T, S>) -> Intersection<'a, T, S>;
std::collections::HashSet<T, S> fn union<'a>(&'a self, other: &'a HashSet<T, S>) -> Union<'a, T, S>;
```
Parent issue: #89692
r? ```@joshtriplett```
Previously, it wasn't clear whether "This could include" was referring
to logic errors, or undefined behaviour. Tweak wording to clarify this
sentence does not relate to UB.
Fix MIRI UB in `Vec::swap_remove`
Fixes#90055
I find it weird that `Vec::swap_remove` read the last element to the stack just to immediately put it back in the `Vec` in place of the one at index `index`. It seems much more natural to me to just read the element at position `index` and then move the last element in its place. I guess this might also slightly improve codegen.
Avoid overflow in `VecDeque::with_capacity_in()`.
The overflow only happens if alloc is compiled with overflow checks enabled and the passed capacity is greater or equal 2^(usize::BITS-1). The overflow shadows the expected "capacity overflow" panic leading to a test failure if overflow checks are enabled for std in the CI.
Unblocks [CI: Enable overflow checks for test (non-dist) builds #89776](https://github.com/rust-lang/rust/pull/89776).
For some reason the overflow is only observable with optimization turned off, but that is a separate issue.
Avoid allocations and copying in Vec::leak
The [`Vec::leak`] method (#62195) is currently implemented by calling `Vec::into_boxed_slice` and `Box::leak`. This shrinks the vector before leaking it, which potentially causes a reallocation and copies the vector's contents.
By avoiding the conversion to `Box`, we can instead leak the vector without any expensive operations, just by returning a slice reference and forgetting the `Vec`. Users who *want* to shrink the vector first can still do so by calling `shrink_to_fit` explicitly.
**Note:** This could break code that uses `Box::from_raw` to “un-leak” the slice returned by `Vec::leak`. However, the `Vec::leak` docs explicitly forbid this, so such code is already incorrect.
[`Vec::leak`]: https://doc.rust-lang.org/stable/std/vec/struct.Vec.html#method.leak
Optimize VecDeque::append
Optimize `VecDeque::append` to do unsafe copy rather than iterating through each element.
On my `Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz`, the benchmark shows 37% improvements:
```
Master:
custom-bench vec_deque_append 583164 ns/iter
custom-bench vec_deque_append 550040 ns/iter
Patched:
custom-bench vec_deque_append 349204 ns/iter
custom-bench vec_deque_append 368164 ns/iter
```
Additional notes on the context: this is the third attempt to implement a non-trivial version of `VecDeque::append`, the last two are reverted due to unsoundness or regression, see:
- https://github.com/rust-lang/rust/pull/52553, reverted in https://github.com/rust-lang/rust/pull/53571
- https://github.com/rust-lang/rust/pull/53564, reverted in https://github.com/rust-lang/rust/pull/54851
Both cases are covered by existing tests.
Signed-off-by: tabokie <xy.tao@outlook.com>
The unifying theme for this commit is weak, admittedly. I put together a
list of "expensive" functions when I originally proposed this whole
effort, but nobody's cared about that criterion. Still, it's a decent
way to bite off a not-too-big chunk of work.
Given the grab bag nature of this commit, the messages I used vary quite
a bit.
`[].split_inclusive()` currently yields a single, empty slice. That's
different from `"".split_inslusive()`, which yields no output at
all. I think that makes the slice version harder to use.
The case where I ran into this bug was when writing code for
generating a diff between two slices of bytes. I wanted to prefix
removed lines with "-" and a added lines with "+". Due to
`split_inclusive()`'s current behavior, that means that my code prints
just a "-" or "+" for empty files. I suspect most existing callers
have similar "bugs" (which would be fixed by this patch).
Closes#89716.
Add #[must_use] to non-mutating verb methods
These are methods that could be misconstrued to mutate their input, similar to #89694. I gave each one a different custom message.
I wrote that `upgrade` and `downgrade` don't modify the input pointers. Logically they don't, but technically they do...
Parent issue: #89692
r? ```@joshtriplett```
Add #[must_use] to from_value conversions
I added two methods to the list myself. Clippy did not flag them because they take `mut` args, but neither modifies their argument.
```rust
core::str const unsafe fn from_utf8_unchecked_mut(v: &mut [u8]) -> &mut str;
std::ffi::CString unsafe fn from_raw(ptr: *mut c_char) -> CString;
```
I put a custom note on `from_raw`:
```rust
#[must_use = "call `drop(from_raw(ptr))` if you intend to drop the `CString`"]
pub unsafe fn from_raw(ptr: *mut c_char) -> CString {
```
Parent issue: #89692
r? ``@joshtriplett``
Add #[must_use] to alloc constructors
Added `#[must_use]`. to the various forms of `new`, `pin`, and `with_capacity` in the `alloc` crate. No extra explanations given as I couldn't think of anything useful to add.
I figure this deserves extra scrutiny compared to the other PRs I've done so far. In particular:
* The 4 `pin`/`pin_in` methods I touched. Are there legitimate use cases for pinning and not using the result? Pinning's a difficult concept I'm not very comfortable with.
* `Box`'s constructors. Do people ever create boxes just for the side effects... allocating or zeroing out memory?
Parent issue: #89692
r? ``@joshtriplett``
Cfg hide no_global_oom_handling and no_fp_fmt_parse
These are unstable sysroot customisation cfg options that only projects building their own sysroot will use (e.g. Rust-for-linux). Most users shouldn't care. `no_global_oom_handling` can be especially annoying since it's applied on many commonly used alloc crate methods (e.g. `Box::new`, `Vec::push`).
r? ```@GuillaumeGomez```
Add documentation to boxed conversions
Among other changes, documents whether allocations are necessary
to complete the type conversion.
Part of #51430, supersedes #89199
These methods could be misconstrued as modifying their arguments instead
of returning new values.
Where possible I made the note recommend a method that does mutate in
place.
Among other changes, documents whether allocations are necessary
to complete the type conversion.
Part of #51430
Co-authored-by: Giacomo Stevanato <giaco.stevanato@gmail.com>
Co-authored-by: Joshua Nelson <github@jyn.dev>
Make cfg imply doc(cfg)
This is a reopening of #79341, rebased and modified a bit (we made a lot of refactoring in rustdoc's types so they needed to be reflected in this PR as well):
* `hidden_cfg` is now in the `Cache` instead of `DocContext` because `cfg` information isn't stored anymore on `clean::Attributes` type but instead computed on-demand, so we need this information in later parts of rustdoc.
* I removed the `bool_to_options` feature (which makes the code a bit simpler to read for `SingleExt` trait implementation.
* I updated the version for the feature.
There is only one thing I couldn't figure out: [this comment](https://github.com/rust-lang/rust/pull/79341#discussion_r561855624)
> I think I'll likely scrap the whole `SingleExt` extension trait as the diagnostics for 0 and >1 items should be different.
How/why should they differ?
EDIT: this part has been solved, the current code was fine, just needed a little simplification.
cc `@Nemo157`
r? `@jyn514`
Original PR description:
This is only active when the `doc_cfg` feature is active.
The implicit cfg can be overridden via `#[doc(cfg(...))]`, so e.g. to hide a `#[cfg]` you can use something like:
```rust
#[cfg(unix)]
#[doc(cfg(all()))]
pub struct Unix;
```
By adding `#![doc(cfg_hide(foobar))]` to the crate attributes the cfg `#[cfg(foobar)]` (and _only_ that _exact_ cfg) will not be implicitly treated as a `doc(cfg)` to render a message in the documentation.
`slice::sort_by_cached_key` takes a caching function
`f: impl FnMut(&T) -> K`, which means that the order that calls to the
caching function are made is user-visible. This adds a clause to the
documentation to promise the current behavior, which is that `f` is
called on all elements of the slice from left to right, unless the slice
has len < 2 in which case `f` is not called.
refactor: make VecDeque's IterMut fields module-private, not just crate-private
Made the fields of VecDeque's IterMut private by creating a IterMut::new(...) function to create a new instance of IterMut and migrating usage to use IterMut::new(...).
Made the fields of VecDeque's IterMut private by creating a IterMut::new(...) function to create a new instance of IterMut and migrating usage to use IterMut::new(...).
refactor: VecDeques PairSlices fields to private
Reducing VecDeque's PairSlices fields to private, a `from(...)` method is already used to create PairSlices.
Correctly handle supertraits for min_specialization
Supertraits of specialization markers could circumvent checks for
min_specialization. Elaborating predicates prevents this.
r? ````@nikomatsakis````
implement advance_(back_)_by on more iterators
Add more efficient, non-default implementations for `feature(iter_advance_by)` (#77404) on more iterators and adapters.
This PR only contains implementations where skipping over items doesn't elide any observable side-effects such as user-provided closures or `clone()` functions. I'll put those in a separate PR.
Add truncate note to Vec::resize
A very minor addition to the `Vec::resize` documentation to point out the `truncate` method.
When I was searching for something matching `truncate` I managed to miss it, along with some colleagues. We later found it by chance. We did find `resize` however, so I was hoping to point it out in the documentation.
Optimize unnecessary check in Vec::retain
The function `vec::Vec::retain` only have two stages:
1. Nothing was deleted.
2. Some elements were deleted.
Here is an unnecessary check `if g.deleted_cnt > 0` in the loop, and it's difficult for compiler to optimize it. I split the loop into two stages manully and keep the code clean using const generics.
I write a special but common bench case for this optimization. I call retain on vec but keep all elements.
Before and after this optimization:
```
test vec::bench_retain_whole_100000 ... bench: 84,803 ns/iter (+/- 17,314)
```
```
test vec::bench_retain_whole_100000 ... bench: 42,638 ns/iter (+/- 16,910)
```
The result is expected, there are two `if`s before the optimization and one `if` after.
Fix spacing of links in inline code.
Similar to #80733, but the focus is different. This PR eliminates all occurrences of pieced-together inline code blocks like [`Box`]`<`[`Option`]`<T>>` and replaces them with good-looking ones (using HTML-syntax), like <code>[Box]<[Option]\<T>></code>. As far as I can tell, I should’ve found all of these in the standard library (regex search with `` r"`\]`|`\[`" ``) \[except for in `core::convert` where I’ve noticed other things in the docs that I want to fix in a separate PR]. In particular, unlike #80733, I’ve added almost no new instance of inline code that’s broken up into multiple links (or some link and some link-free part). I also added tooltips (the stuff in quotes for the markdown link listings) in places that caught my eye, but that’s by no means systematic, just opportunistic.
[Box]: https://doc.rust-lang.org/std/boxed/struct.Box.html "Box"
[`Box`]: https://doc.rust-lang.org/std/boxed/struct.Box.html "Box"
[Option]: https://doc.rust-lang.org/std/option/enum.Option.html "Option"
[`Option`]: https://doc.rust-lang.org/std/option/enum.Option.html "Option"
Context: I got annoyed by repeatedly running into new misformatted inline code while reading the standard library docs. I know that once issue #83997 (and/or related ones) are resolved, these changes become somewhat obsolete, but I fail to notice much progress on that end right now.
r? `@jyn514`
----------
Fix spacing for links inside code blocks, and improve link tooltips in alloc::fmt
----------
Fix spacing for links inside code blocks, and improve link tooltips in alloc::{rc, sync}
----------
Fix spacing for links inside code blocks, and improve link tooltips in alloc::string
----------
Fix spacing for links inside code blocks in alloc::vec
----------
Fix spacing for links inside code blocks in core::option
----------
Fix spacing for links inside code blocks, and improve a few link tooltips in core::result
----------
Fix spacing for links inside code blocks in core::{iter::{self, iterator}, stream::stream, poll}
----------
Fix spacing for links inside code blocks, and improve a few link tooltips in std::{fs, path}
----------
Fix spacing for links inside code blocks in std::{collections, time}
----------
Fix spacing for links inside code blocks in and make formatting of `&str`-like types consistent in std::ffi::{c_str, os_str}
----------
Fix spacing for links inside code blocks, and improve link tooltips in std::ffi
----------
Fix spacing for links inside code blocks, and improve a few link tooltips
in std::{io::{self, buffered::{bufreader, bufwriter}, cursor, util}, net::{self, addr}}
----------
Fix typo in link to `into` for `OsString` docs
----------
Remove tooltips that will probably become redundant in the future
----------
Apply suggestions from code review
Replacing `…std/primitive.reference.html` paths with just `reference`
Co-authored-by: Joshua Nelson <github@jyn.dev>
----------
Also replace `…std/primitive.reference.html` paths with just `reference` in `core::pin`
Introduce `Rvalue::ShallowInitBox`
Polished version of #88700.
Implements MCP rust-lang/compiler-team#460, and should allow #43596 to go forward.
In short, creating an empty box is split from a nullary-op `NullOp::Box` into two steps, first a call to `exchange_malloc`, then a `Rvalue::ShallowInitBox` which transmutes `*mut u8` to a shallow-initialized `Box<T>`. This allows the `exchange_malloc` call to unwind. Details can be found in the MCP.
`NullOp::Box` is not yet removed, purely to make reverting easier in case anything goes wrong as the result of this PR. If revert is needed a reversion of "Use Rvalue::ShallowInitBox for box expression" commit followed by a test bless should be sufficient.
Experiments in #88700 showed a very slight compile-time perf regression due to (supposedly) slightly more time spent in LLVM. We could omit unwind edge generation (in non-`oom=panic` case) in box expression MIR construction to restore perf; but I don't think it's necessary since runtime perf isn't affected and perf difference is rather small.
Fix missing `no_global_oom_handling` cfg-gating
Cfg-gate these trait impls that are neglected.
These functions compile now because they use `box` syntax which depends on `exchange_malloc` during codegen only; as a result they compiles with cfg `no_global_oom_handling` but shouldn't.
Discovered in #89030 because that PR makes `box` syntax depend on `exchange_malloc` lang item during MIR construction.
BTreeMap/BTreeSet::from_iter: use bulk building to improve the performance
Bulk building is a common technique to increase the performance of building a fresh btree map. Instead of inserting items one-by-one, we sort all the items beforehand then create the BtreeMap in bulk.
Benchmark
```
./x.py bench library/alloc --test-args btree::map::from_iter
```
* Before
```
test btree::map::from_iter_rand_100 ... bench: 3,694 ns/iter (+/- 840)
test btree::map::from_iter_rand_10_000 ... bench: 1,033,446 ns/iter (+/- 192,950)
test btree::map::from_iter_seq_100 ... bench: 5,689 ns/iter (+/- 1,259)
test btree::map::from_iter_seq_10_000 ... bench: 861,033 ns/iter (+/- 118,815)
```
* After
```
test btree::map::from_iter_rand_100 ... bench: 3,033 ns/iter (+/- 707)
test btree::map::from_iter_rand_10_000 ... bench: 775,958 ns/iter (+/- 105,152)
test btree::map::from_iter_seq_100 ... bench: 2,969 ns/iter (+/- 336)
test btree::map::from_iter_seq_10_000 ... bench: 258,292 ns/iter (+/- 29,364)
```
BTree: remove Ord bound from new
`K: Ord` bound is unnecessary on `BTree{Map,Set}::new` and their `Default` impl. No elements exist so there are nothing to compare anyway, so I don't think "future proof" would be a blocker here. This is analogous to `HashMap::new` not having a `K: Eq + Hash` bound.
#79245 originally does this and for some reason drops the change to `new` and `Default`. I can see why changes to other methods like `entry` or `symmetric_difference` need to be careful but I couldn't find out any reason not to do it on `new`.
Removing the bound also makes the stabilisation of `const fn new` not depending on const trait bounds.
cc `@steffahn` who suggests me to make this PR.
r? `@dtolnay`
Bulk building is a common technique to increase the performance of
building a fresh btree map. Instead of inserting items one-by-one,
we sort all the items beforehand then create the BtreeMap in bulk.
Fix typo “a Rc” → “an Rc” (and a few more)
After stumbling about it in the dev-guide, I’ve devided to eliminate all mentions of “a Rc”, replacing it with “an Rc”. E.g.
```plain
$ rg "(^|[^'])\ba\b[^\w=:]*\bRc"
compiler/rustc_data_structures/src/owning_ref/mod.rs
1149:/// Typedef of a owning reference that uses a `Rc` as the owner.
library/std/src/ffi/os_str.rs
919: /// Converts a [`OsString`] into a [`Rc`]`<OsStr>` without copying or allocating.
library/std/src/ffi/c_str.rs
961: /// Converts a [`CString`] into a [`Rc`]`<CStr>` without copying or allocating.
src/doc/rustc-dev-guide/src/query.md
61:are cheaply cloneable; insert a `Rc` if necessary).
src/doc/book/src/ch15-06-reference-cycles.md
72:decreases the reference count of the `a` `Rc<List>` instance from 2 to 1 as
library/alloc/src/rc.rs
1746: /// Converts a generic type `T` into a `Rc<T>`
```
_(the match in the book is a false positive)_
Since the dev-guide is a submodule, it’s getting a separate PR: rust-lang/rustc-dev-guide#1191
I’ve also gone ahead and done the same search for `RwLock` and hit a few cases in the `OwningRef` adaption. Then, I couldn’t keep the countless cases of “a owning …” or “a owner” unaddressed, which concludes this PR.
`@rustbot` label C-cleanup
Adjust / fix documentation of `Arc::make_mut`
Related discussion in the users forum:
[Whatʼs this alleged difference between Arc::make_mut and Rc::make_mut? – The Rust Programming Language Forum](https://users.rust-lang.org/t/what-s-this-alleged-difference-between-arc-make-mut-and-rc-make-mut/63747?u=steffahn)
Also includes a small formatting improvement in the documentation of `Rc::make_mut`.
This PR makes the two documentations in question complete analogs. The previously claimed point in which one “differs from the behavior of” the other turns out to be incorrect, AFAIK.
One remaining inaccuracy: `Weak` pointers aren’t disassociated from the allocation but only from the contained value, i.e. in case of outstanding `Weak` pointers there still is a new allocation created, just the call to `.clone()` is avoided, instead the value is moved from one allocation to the other.
`@rustbot` label T-libs-api, A-docs
Optimize unnecessary check in VecDeque::retain
This pr is highly inspired by https://github.com/rust-lang/rust/pull/88060 which shared the same idea: we can split the `for` loop into stages so that we can remove unnecessary checks like `del > 0`.
## Benchmarks
Before
```rust
test collections::vec_deque::tests::bench_retain_half_10000 ... bench: 290,125 ns/iter (+/- 8,717)
test collections::vec_deque::tests::bench_retain_odd_10000 ... bench: 291,588 ns/iter (+/- 9,621)
test collections::vec_deque::tests::bench_retain_whole_10000 ... bench: 287,426 ns/iter (+/- 9,009)
```
After
```rust
test collections::vec_deque::tests::bench_retain_half_10000 ... bench: 243,940 ns/iter (+/- 8,563)
test collections::vec_deque::tests::bench_retain_odd_10000 ... bench: 242,768 ns/iter (+/- 3,903)
test collections::vec_deque::tests::bench_retain_whole_10000 ... bench: 202,926 ns/iter (+/- 6,332)
```
Based on the current benchmark, this PR will improve the perf of `VecDeque::retain` by around 16%. For special cases, the improvement will be up to 30%.
Signed-off-by: Xuanwo <github@xuanwo.io>
Related discussion in the users forum:
https://users.rust-lang.org/t/what-s-this-alleged-difference-between-arc-make-mut-and-rc-make-mut/63747?u=steffahn
Also includes small formatting improvement in the documentation of `Rc::make_mut`.
This commit makes the two documentations in question complete analogs. The previously claimed point in which
one "differs from the behavior of" the other turns out to be incorrect, AFAIK.
One remaining inaccuracy: `Weak` pointers aren't disassociated from the allocation but only from the contained
value, i.e. in case of outstanding `Weak` pointers there still is a new allocation created, just the
call to `.clone()` is avoided, instead the value is moved from one allocation to the other.
The libs-api team agrees to allow const_trait_impl to appear in the
standard library as long as stable code cannot be broken (they are
properly gated) this means if the compiler teams thinks it's okay, then
it's okay.
My priority on constifying would be:
1. Non-generic impls (e.g. Default) or generic impls with no
bounds
2. Generic functions with bounds (that use const impls)
3. Generic impls with bounds
4. Impls for traits with associated types
For people opening constification PRs: please cc me and/or oli-obk.
Assign FIXMEs to me and remove obsolete ones
Also fixed capitalization of documentation
We also don't need to transform predicates to be non-const since we basically ignore const predicates in non-const contexts.
r? `````@oli-obk`````
BTree: merge the complication introduced by #81486 and #86031
Also:
- Deallocate the last few tree nodes as soon as an `into_iter` iterator steps beyond the end, instead of waiting around for the drop of the iterator (just to share more code).
- Symmetric code for backward iteration.
- Mark unsafe the methods on dying handles, modelling dying handles after raw pointers: it's the caller's responsibility to use them safely.
r? `@Mark-Simulacrum`
Test and fix `size_hint` for slice’s [r]split* iterators
Adds extensive test (of `size_hint`) for all the _[r]split*_ iterators.
Fixes `size_hint` upper bound for _split_inclusive*_ iterators which was one higher than necessary for non-empty slices.
Fixes `size_hint` lower bound for _[r]splitn*_ iterators when _n == 0_, which was one too high.
**Lower bound being one too high was a logic error, violating the correctness condition of `size_hint`.**
_Edit:_ I’ve opened an issue for that bug, so this PR fixes#87978
Specialize `Vec::clone_from` for `Copy` types
This should improve performance and reduce code size.
This also improves `clone_from` for `String`, `OsString` and `PathBuf`.
Adds extensive test for all the [r]split* iterators.
Fixes size_hint upper bound for split_inclusive* iterators which was one higher than necessary for non-empty slices.
Fixes size_hint lower bound for [r]splitn* iterators when n==0, which was one too high.
Stabilize Vec<T>::shrink_to
This PR stabilizes `shrink_to` feature and closes the corresponding issue. The second point was addressed already, and no `panic!` should occur.
Closes#56431.
Hide allocator details from TryReserveError
I think there's [no need for TryReserveError to carry detailed information](https://github.com/rust-lang/rust/issues/48043#issuecomment-825139280), but I wouldn't want that issue to delay stabilization of the `try_reserve` feature.
So I'm proposing to stabilize `try_reserve` with a `TryReserveError` as an opaque structure, and if needed, expose error details later.
This PR moves the `enum` to an unstable inner `TryReserveErrorKind` that lives under a separate feature flag. `TryReserveErrorKind` could possibly be left as an implementation detail forever, and the `TryReserveError` get methods such as `allocation_size() -> Option<usize>` or `layout() -> Option<Layout>` instead, or the details could be dropped completely to make try-reserve errors just a unit struct, and thus smaller and cheaper.
Currently there is no API that allows fallible zero-allocation of a Vec.
Vec.try_reserve is not appropriate for this job since it doesn't know
whether it should zero or arbitrary uninitialized memory is fine.
Since Box currently holds most of the zeroing/uninit/slice allocation APIs
it's the best place to add yet another entry into this feature matrix.
rfc3052 followup: Remove authors field from Cargo manifests
Since RFC 3052 soft deprecated the authors field, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information for contributors, we may as well
remove it from crates in this repo.
Recommend `swap_remove` in `Vec::remove` docs
I was able to increase the performance (by 20%!) of my project by changing a `Vec::remove` call to `Vec::swap_remove` in a hot function. I think we should explicitly put a note in the Vec::remove docs to guide people in the right direction so they don't make a similar oversight.
BTree: lazily locate leaves in rangeless iterators
BTree iterators always locate both the first and last leaf edge and often only need either one, i.e., whenever they are traversed in a single direction, like in for-loops and in the common use of `iter().next()` or `iter().next_back()` to retrieve the first or last key/value-pair (#62924). It's fairly easy to avoid because the iterators with this disadvantage already are quite separate from other iterators.
r? `@Mark-Simulacrum`
Move UnwindSafe, RefUnwindSafe, AssertUnwindSafe to core
They were previously only available in std::panic, not core::panic.
- https://doc.rust-lang.org/1.51.0/std/panic/trait.UnwindSafe.html
- https://doc.rust-lang.org/1.51.0/std/panic/trait.RefUnwindSafe.html
- https://doc.rust-lang.org/1.51.0/std/panic/struct.AssertUnwindSafe.html
Where this is relevant: trait objects! Inside a `#![no_std]` library it's otherwise impossible to have a struct holding a trait object, and at the same time can be used from downstream std crates in a way that doesn't interfere with catch_unwind.
```rust
// common library
#![no_std]
pub struct Thing {
pub(crate) x: &'static (dyn SomeTrait + Send + Sync),
}
pub(crate) trait SomeTrait {...}
```
```rust
// downstream application
fn main() {
let thing: library::Thing = ...;
let _ = std::panic::catch_unwind(|| { let _ = thing; }); // does not work :(
}
```
See a4131708e2/src/gradient.rs (L7-L15) for a real life example of needing to work around this problem. In particular that workaround would not even be viable if implementors of the trait were provided externally by a caller, as the `feature = "std"` would become non-additive in that case.
What happens without the UnwindSafe constraints:
```rust
fn main() {
let gradient = colorous::VIRIDIS;
let _ = std::panic::catch_unwind(|| { let _ = gradient; });
}
```
```console
error[E0277]: the type `(dyn colorous::gradient::EvalGradient + Send + Sync + 'static)` may contain interior mutability and a reference may not be safely transferrable across a catch_unwind boundary
--> src/main.rs:3:13
|
3 | let _ = std::panic::catch_unwind(|| { let _ = gradient; });
| ^^^^^^^^^^^^^^^^^^^^^^^^ `(dyn colorous::gradient::EvalGradient + Send + Sync + 'static)` may contain interior mutability and a reference may not be safely transferrable across a catch_unwind boundary
|
::: .rustup/toolchains/nightly-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/library/std/src/panic.rs:430:40
|
430 | pub fn catch_unwind<F: FnOnce() -> R + UnwindSafe, R>(f: F) -> Result<R> {
| ---------- required by this bound in `catch_unwind`
|
= help: within `Gradient`, the trait `RefUnwindSafe` is not implemented for `(dyn colorous::gradient::EvalGradient + Send + Sync + 'static)`
= note: required because it appears within the type `&'static (dyn colorous::gradient::EvalGradient + Send + Sync + 'static)`
= note: required because it appears within the type `Gradient`
= note: required because of the requirements on the impl of `UnwindSafe` for `&Gradient`
= note: required because it appears within the type `[closure@src/main.rs:3:38: 3:62]`
```
Track caller of Vec::remove()
`vec.remove(invalid)` doesn't print a helpful source position:
> thread 'main' panicked at 'removal index (is 99) should be < len (is 1)', **library/alloc/src/vec/mod.rs:1379:13**
Update the examples in `String` and `VecDeque::retain`
The examples added in #60396 used a "clever" post-increment hack,
unrelated to the actual point of the examples. That hack was found
[confusing] in the users forum, and #81811 already changed the `Vec`
example to use a more direct iterator. This commit changes `String` and
`VecDeque` in the same way for consistency.
[confusing]: https://users.rust-lang.org/t/help-understand-strange-expression/62858
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
Remove unsound TrustedRandomAccess implementations
Removes the implementations that depend on the user-definable trait `Copy`.
Fixes#85873 in the most straightforward way.
<hr>
_Edit:_ This PR now contains additional trait infrastructure to avoid performance regressions around in-place collect, see the discussion in this thread starting from the codegen test failure at https://github.com/rust-lang/rust/pull/85874#issuecomment-872327577.
With this PR, `TrustedRandomAccess` gains additional documentation that specifically allows for and specifies the safety conditions around subtype coercions – those coercions can happen in safe Rust code with the `Zip` API’s usage of `TrustedRandomAccess`. This PR introduces a new supertrait of `TrustedRandomAccess`(currently named `TrustedRandomAccessNoCoerce`) that _doesn’t allow_ such coercions, which means it can be still be useful for optimizing cases such as in-place collect where no iterator is handed out to a user (who could do coercions) after a `get_unchecked` call; the benefit of the supertrait is that it doesn’t come with the additional safety conditions around supertraits either, so it can be implemented for more types than `TrustedRandomAccess`.
The `TrustedRandomAccess` implementations for `vec::IntoIter`, `vec_deque::IntoIter`, and `array::IntoIter` are removed as they don’t conform with the newly documented safety conditions, this way unsoundness is removed. But this PR in turn (re-)adds a `TrustedRandomAccessNoCoerce` implementation for `vec::IntoIter` to avoid performance regressions from stable in a case of in-place collecting of `Vec`s [the above-mentioned codegen test failure]. Re-introducing the (currently nightly+beta-only) impls for `VecDeque`’s and `[T; N]`’s iterators is technically possible, but goes beyond the scope of this PR (i.e. it can happen in a future PR).
The examples added in #60396 used a "clever" post-increment hack,
unrelated to the actual point of the examples. That hack was found
[confusing] in the users forum, and #81811 already changed the `Vec`
example to use a more direct iterator. This commit changes `String` and
`VecDeque` in the same way for consistency.
[confusing]: https://users.rust-lang.org/t/help-understand-strange-expression/62858
implement fold() on array::IntoIter to improve flatten().collect() perf
With #87168 flattening `array::IntoIter`s is now `TrustedLen`, the `FromIterator` implementation for `Vec` has a specialization for `TrustedLen` iterators which uses internal iteration. This implements one of the main internal iteration methods on `array::Into` to optimize the combination of those two features.
This should address the main issue in #87411
```
# old
test vec::bench_flat_map_collect ... bench: 2,244,024 ns/iter (+/- 18,903)
# new
test vec::bench_flat_map_collect ... bench: 172,863 ns/iter (+/- 2,141)
```
Make StrSearcher behave correctly on empty needle
Fix#85462.
This will not affect ABI since the other variant of the enum is bigger.
It may break some code, but that would be very strange: usually people
don't continue after the first `Done` (or `None` for a normal iterator).
`@rustbot` label T-libs A-str A-patterns
Add support for custom allocator in `VecDeque`
This follows the [roadmap](https://github.com/rust-lang/wg-allocators/issues/7) of the allocator WG to add custom allocators to collections.
`@rustbot` modify labels: +A-allocators +T-libs
Stabilize `impl From<[(K, V); N]> for HashMap` (and friends)
In addition to allowing HashMap to participate in Into/From conversion, this adds the long-requested ability to use constructor-like syntax for initializing a HashMap:
```rust
let map = HashMap::from([
(1, 2),
(3, 4),
(5, 6)
]);
```
This addition is highly motivated by existing precedence, e.g. it is already possible to similarly construct a Vec from a fixed-size array:
```rust
let vec = Vec::from([1, 2, 3]);
```
...and it is already possible to collect a Vec of tuples into a HashMap (and vice-versa):
```rust
let vec = Vec::from([(1, 2)]);
let map: HashMap<_, _> = vec.into_iter().collect();
let vec: Vec<(_, _)> = map.into_iter().collect();
```
...and of course it is likewise possible to collect a fixed-size array of tuples into a HashMap ([but not vice-versa just yet](https://github.com/rust-lang/rust/issues/81615)):
```rust
let arr = [(1, 2)];
let map: HashMap<_, _> = std::array::IntoIter::new(arr).collect();
```
Therefore this addition seems like a no-brainer.
As for any impl, this would be insta-stable.
Document iteration order of `retain` functions
For `HashSet` and `HashMap`, this simply copies the comment from
`BinaryHeap::retain`.
For `BTreeSet` and `BTreeMap`, this adds an additional guarantee that
wasn't previously documented. I think that because these data structures
are inherently ordered and other functions guarantee ordered iteration,
it makes sense to provide this guarantee for `retain` as well.
Removes the implementations that depend on the user-definable trait `Copy`.
Only fix regressions to ensure merge in 1.55: Does not modify `vec::IntoIter`.
Add diagnostic items for Clippy
This adds a bunch of diagnostic items to `std`/`core`/`alloc` functions, structs and traits used in Clippy. The actual refactorings in Clippy to use these items will be done in a different PR in Clippy after the next sync.
This PR doesn't include all paths Clippy uses, I've only gone through the first 85 lines of Clippy's [`paths.rs`](ecf85f4bdc/clippy_utils/src/paths.rs) (after rust-lang/rust-clippy#7466) to get some feedback early on. I've also decided against adding diagnostic items to methods, as it would be nicer and more scalable to access them in a nicer fashion, like adding a `is_diagnostic_assoc_item(did, sym::Iterator, sym::map)` function or something similar (Suggested by `@camsteffen` [on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/147480-t-compiler.2Fwg-diagnostics/topic/Diagnostic.20Item.20Naming.20Convention.3F/near/225024603))
There seems to be some different naming conventions when it comes to diagnostic items, some use UpperCamelCase (`BinaryHeap`) and some snake_case (`hashmap_type`). This PR uses UpperCamelCase for structs and traits and snake_case with the module name as a prefix for functions. Any feedback on is this welcome.
cc: rust-lang/rust-clippy#5393
r? `@Manishearth`
Update BTreeSet::drain_filter documentation
This commit makes the documentation of `BTreeSet::drain_filter` more
consistent with that of `BTreeMap::drain_filter` after the changes in
f0b8166870.
In particular, this explicitly documents the iteration order.
BTree: consistently avoid unwrap_unchecked in iterators
Some iterator support functions named `_unchecked` internally use `unwrap`, some use `unwrap_unchecked`. This PR tries settling on `unwrap`. #86195 went up the same road but travelled way further and doesn't seem successful.
r? `@Mark-Simulacrum`
Remove some doc aliases
As per the new doc alias policy in https://github.com/rust-lang/std-dev-guide/pull/25, this removes some controversial doc aliases:
- `malloc`, `alloc`, `realloc`, etc.
- `length` (alias for `len`)
- `delete` (alias for `remove` in collections and also file/directory deletion)
r? `@joshtriplett`
alloc: `no_global_oom_handling`: disable `new()`s, `pin()`s, etc.
They are infallible, and could not be actually used because
they will trigger an error when monomorphized, but it is better
to just remove them.
Link: https://github.com/Rust-for-Linux/linux/pull/402
Suggested-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
They are infallible, and could not be actually used because
they will trigger an error when monomorphized, but it is better
to just remove them.
Link: https://github.com/Rust-for-Linux/linux/pull/402
Suggested-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add linked list cursor end methods
I add several methods to `LinkedList::CursorMut` and `LinkedList::Cursor`. These methods allow you to access/manipulate the ends of a list via the cursor. This is especially helpful when scanning through a list and reordering. For example:
```rust
let mut c = ll.back_cursor_mut();
let mut moves = 10;
while c.current().map(|x| x > 5).unwrap_or(false) {
let n = c.remove_current();
c.push_front(n);
if moves > 0 { break; } else { moves -= 1; }
}
```
I encountered this problem working on my bachelors thesis doing graph index manipulation.
While this problem can be avoided by splicing, it is awkward. I asked about the problem [here](https://internals.rust-lang.org/t/linked-list-cursurmut-missing-methods/14921/4) and it was suggested I write a PR.
All methods added consist of
```rust
Cursor::front(&self) -> Option<&T>;
Cursor::back(&self) -> Option<&T>;
CursorMut::front(&self) -> Option<&T>;
CursorMut::back(&self) -> Option<&T>;
CursorMut::front_mut(&mut self) -> Option<&mut T>;
CursorMut::back_mut(&mut self) -> Option<&mut T>;
CursorMut::push_front(&mut self, elt: T);
CursorMut::push_back(&mut self, elt: T);
CursorMut::pop_front(&mut self) -> Option<T>;
CursorMut::pop_back(&mut self) -> Option<T>;
```
#### Design decisions:
I tried to remain as consistent as possible with what was already present for linked lists.
The methods `front`, `front_mut`, `back` and `back_mut` are identical to their `LinkedList` equivalents.
I tried to make the `pop_front` and `pop_back` methods work the same way (vis a vis the "ghost" node) as `remove_current`. I thought this was the closest analog.
`push_front` and `push_back` do not change the "current" node, even if it is the "ghost" node. I thought it was most intuitive to say that if you add to the list, current will never change.
Any feedback would be welcome 😄
For `HashSet` and `HashMap`, this simply copies the comment from
`BinaryHeap::retain`.
For `BTreeSet` and `BTreeMap`, this adds an additional guarantee that
wasn't previously documented. I think that because these data structures
are inherently ordered and other functions guarantee ordered iteration,
it makes sense to provide this guarantee for `retain` as well.
This commit makes the documentation of `BTreeSet::drain_filter` more
consistent with that of `BTreeMap::drain_filter` after the changes in
f0b8166870.
In particular, this explicitly documents the iteration order.
