CFI: Enable KCFI testing of run-pass tests
This enables KCFI-based testing for all the CFI run-pass tests in the suite today. We can add the test header on top of in-flight CFI tests once they land. This is becoming more important as we get closer to leveraging CFI's multiple type attachment feature, as that is where the implementations will have a divergence.
It also enables KCFI as a sanitizer for x86_64 and aarch64 Linux to make this possible. The sanitizer should likely be available for all aarch64, x86_64, and riscv targets, but that isn't critical for initial testing.
Make `TyCtxt::coroutine_layout` take coroutine's kind parameter
For coroutines that come from coroutine-closures (i.e. async closures), we may have two kinds of bodies stored in the coroutine; one that takes the closure's captures by reference, and one that takes the captures by move.
These currently have identical layouts, but if we do any optimization for these layouts that are related to the upvars, then they will diverge -- e.g. https://github.com/rust-lang/rust/pull/120168#discussion_r1536943728.
This PR relaxes the assertion I added in #121122, and instead make the `TyCtxt::coroutine_layout` method take the `coroutine_kind_ty` argument from the coroutine, which will allow us to differentiate these by-move and by-ref bodies.
coverage: Re-enable `UnreachablePropagation` for coverage builds
This is a sequence of 3 related changes:
- Clean up the existing code that scans for unused functions
- Detect functions that were instrumented for coverage, but have had all their coverage statements removed by later MIR transforms (e.g. `UnreachablePropagation`)
- Re-enable `UnreachablePropagation` in coverage builds
Because we now detect functions that have lost their coverage statements, and treat them as unused, we don't need to worry about `UnreachablePropagation` removing all of those statements. This is demonstrated by `tests/coverage/unreachable.rs`.
Fixes#116171.
match lowering: build the `Place` instead of keeping a `PlaceBuilder` around
Outside of `MatchPair::new` we don't construct new places, so we don't need to keep a `PlaceBuilder` around.
A bit annoyingly we have to store an `Option<Place>` even though it's never `None` after simplification, but the alternative would be to re-entangle `MatchPair` construction and simplification and I'd rather not do that.
Rename `Inherited` -> `TypeckRootCtxt`
`Inherited` is a confusing name. Rename it to `TypeckRootCtxt`.
I don't think this needs a type MCP or anything since it's not nearly as pervasive as `FnCtxt` , for example.
r? `@lcnr` `@oli-obk`
In `ConstructCoroutineInClosureShim`, pass receiver by mut ref, not mut pointer
The receivers were compatible at codegen time, but did not necessarily have the same layouts due to niches, which was caught by miri.
Fixesrust-lang/miri#3400
r? oli-obk
Suggest associated type bounds on problematic associated equality bounds
Fixes#105056. TL;DR: Suggest `Trait<Ty: Bound>` on `Trait<Ty = Bound>` in Rust >=2021.
~~Blocked on #122055 (stabilization of `associated_type_bounds`), I'd say.~~ (merged)
Delegation: fix ICE on wrong `self` resolution
fixes https://github.com/rust-lang/rust/issues/122874
Delegation item should be wrapped in a `rib` to behave like a regular function during name resolution.
r? `@petrochenkov`
match lowering: consistently merge simple or-patterns
There are two places where we expand or-patterns in match lowering: the main one is `test_candidates_with_or`, and there's one in `match_candidates` that's an optimization for the simple case where the whole pattern is just one or-pattern.
To reduce duplication, we merge or-pattern alternatives into a single block when possible, but we only to that in `test_candidates_with_or`. This PR fixes this oversight and merges them in `match_candidates` too.
This is a part of splitting up https://github.com/rust-lang/rust/pull/122046 into smaller bits.
CFI: (actually) check that methods are object-safe before projecting their receivers to `dyn Trait` in CFI
`trait_object_ty` assumed that associated types would be fully determined by the trait. This is *almost* true - const parameters and type parameters are no longer allowed, but lifetime parameters are. Since we erase all lifetime parameters anyways, instantiate it with as many erased regions as it needs.
Fixes: #123053
r? `@compiler-errors`
Avoid some unnecessary query invocations.
Specifically this inlines `const_eval_poly` and avoids computing the generic params, the param env, normalizing the param env and erasing lifetimes on everything.
should fix the perf regression from https://github.com/rust-lang/rust/pull/121087
This enables KCFI-based testing for all the CFI run-pass tests in the
suite today. We can add the test header on top of in-flight CFI tests
once they land.
It also enables KCFI as a sanitizer for x86_64 and aarch64 Linux to make
this possible. The sanitizer should likely be available for all aarch64,
x86_64, and riscv targets, but that isn't critical for initial testing.
Rollup of 10 pull requests
Successful merges:
- #122707 (Fix a typo in the alloc::string::String docs)
- #122769 (extend comments for reachability set computation)
- #122892 (fix(bootstrap/dist): use versioned dirs when vendoring)
- #122896 (Update stdarch submodule)
- #122923 (In `pretty_print_type()`, print `async fn` futures' paths instead of spans.)
- #122950 (Add regression tests for #101903)
- #123039 (Update books)
- #123042 (Import the 2021 prelude in the core crate)
- #123044 (`Instance` is `Copy`)
- #123051 (did I mention that tests are super cool? )
r? `@ghost`
`@rustbot` modify labels: rollup
If a function was instrumented for coverage, but all of its coverage statements
have been removed by later MIR transforms, it should be treated as "unused"
even if the compiler generates an unreachable stub for it.
Print a backtrace in const eval if interrupted
Demo:
```rust
#![feature(const_eval_limit)]
#![const_eval_limit = "0"]
const OW: u64 = {
let mut res: u64 = 0;
let mut i = 0;
while i < u64::MAX {
res = res.wrapping_add(i);
i += 1;
}
res
};
fn main() {
println!("{}", OW);
}
```
```
╭ ➜ ben@archlinux:~/rust
╰ ➤ rustc +stage1 spin.rs
^Cerror[E0080]: evaluation of constant value failed
--> spin.rs:8:33
|
8 | res = res.wrapping_add(i);
| ^ Compilation was interrupted
note: erroneous constant used
--> spin.rs:15:20
|
15 | println!("{}", OW);
| ^^
note: erroneous constant used
--> spin.rs:15:20
|
15 | println!("{}", OW);
| ^^
|
= note: this note originates in the macro `$crate::format_args_nl` which comes from the expansion of the macro `println` (in Nightly builds, run with -Z macro-backtrace for more info)
error: aborting due to previous error
For more information about this error, try `rustc --explain E0080`.
```
`trait_object_ty` assumed that associated types would be fully
determined by the trait. This is *almost* true - const parameters and
type parameters are no longer allowed, but lifetime parameters are.
Since we erase all lifetime parameters anyways, instantiate it with as
many erased regions as it needs.
Fixes: #123053
`Instance` is `Copy`
No reason to take it by value; it was confusing ``@rcvalle`` to see it being mutated when it's also being passed by ref in some places.
In `pretty_print_type()`, print `async fn` futures' paths instead of spans.
This makes `-Zprint-type-sizes`'s output easier to read, because the name of an `async fn` is more immediately recognizable than its span. This change will also synergize with my other `-Zprint-type-sizes` PR #122922 which prints the type of child futures being awaited.
I also deleted the comment "FIXME(eddyb) should use `def_span`." because it appears to have already been fixed by commit 67727aa7c3.
Rename `{enter,exit}_lint_attrs` to `check_attributes{,_post}`
Several places in Clippy want to check all the attributes of a node, we end up using `hir().attrs()` from several different `check_` functions (e.g. [in our doc lints](95c62ffae9/clippy_lints/src/doc/mod.rs (L396))) but this is error prone, we recently found that doc lints weren't triggering on struct fields for example
I went to add a `check_attributes` function but realised `enter_lint_attrs` is already this, the rename is to encourage their use
Also removes `LateContextAndPass::visit_attribute` since it's unused - `visit_attribute` for HIR visitors is only called by `hir().walk_attributes()` which lint passes do not use
Validate that we're only matching on unit struct for path pattern
Resolution doesn't validate that we only really take `CtorKind::Unit` in path patterns, since all it sees is `Res::SelfCtor(def_id)`. Check this instead during pattern typeck.
r? petrochenkov
Fixes#122809
Delegation: fix ICE on `bound_vars` divergence
Fixes https://github.com/rust-lang/rust/issues/122550.
Bug was caused by divergence between lowered type and corresponding `bound_vars` in `late_bound_vars_map`. In this patch `bound_vars` calculation for delegation item is moved from `lower_fn_ty` to `resolve_bound_vars` query.
r? `@petrochenkov`
Don't emit an error about failing to produce a file with a specific name if user never gave an explicit name
Fixes#122509
You can ask `rustc` to produce some intermediate results with `--emit foo`, this operation comes in two flavors: `--emit asm` and `--emit asm=foo.s`. First one produces one or more `.s` files without any name guarantees, second one renames it into `foo.s`. Second version only works when compiler produces a single file - for asm files this means using a single compilation unit for example.
In case compilation produced more than a single file `rustc` runs following check to emit some warnings:
```rust
if crate_output.outputs.contains_key(&output_type) {
// 2) Multiple codegen units, with `--emit foo=some_name`. We have
// no good solution for this case, so warn the user.
sess.dcx().emit_warn(errors::IgnoringEmitPath { extension });
} else if crate_output.single_output_file.is_some() {
// 3) Multiple codegen units, with `-o some_name`. We have
// no good solution for this case, so warn the user.
sess.dcx().emit_warn(errors::IgnoringOutput { extension });
} else {
// 4) Multiple codegen units, but no explicit name. We
// just leave the `foo.0.x` files in place.
// (We don't have to do any work in this case.)
}
```
Comment in the final `else` branch implies that if user didn't ask for a specific name - there's no need to emit warnings. However because of the internal representation of `crate_output.outputs` - this doesn't work as expected: if user asked to produce an asm file without giving it an implicit name it will contain `Some(None)`.
To fix the problem new code actually checks if user gave an explicit name. I think this was an original intentional behavior, at least comments imply that.
This makes `-Zprint-type-sizes`'s output easier to read, because the
name of an `async fn` is more immediately recognizable than its span.
I also deleted the comment "FIXME(eddyb) should use `def_span`." because
it appears to have already been fixed by commit 67727aa7c3.
CFI: Support complex receivers
Right now, we only support rewriting `&self` and `&mut self` into `&dyn MyTrait` and `&mut dyn MyTrait`. This expands it to handle the full gamut of receivers by calculating the receiver based on *substitution* rather than based on a rewrite. This means that, for example, `Arc<Self>` will become `Arc<dyn MyTrait>` appropriately with this change.
This approach also allows us to support associated type constraints as well, so we will correctly rewrite `&self` into `&dyn MyTrait<T=i32>`, for example.
r? ```@workingjubilee```
CFI: Handle dyn with no principal
In user-facing Rust, `dyn` always has at least one predicate following it. Unfortunately, because we filter out marker traits from receivers at callsites and `dyn Sync` is, for example, legal, this results in us having `dyn` types with no predicates on occasion in our alias set encoding. This patch handles cases where there are no predicates in a `dyn` type which are relevant to its alias set.
Fixes#122998
r? workingjubilee
For the `MiddleDot` case, current behaviour:
- For a case like `1.2`, `sym1` is `1` and `sym2` is `2`, and `self.token`
holds `1.2`.
- It creates a new ident token from `sym1` that it puts into `self.token`.
- Then it does `bump_with` with a new dot token, which moves the `sym1`
token into `prev_token`.
- Then it does `bump_with` with a new ident token from `sym2`, which moves the
`dot` token into `prev_token` and discards the `sym1` token.
- Then it does `bump`, which puts whatever is next into `self.token`,
moves the `sym2` token into `prev_token`, and discards the `dot` token
altogether.
New behaviour:
- Skips creating and inserting the `sym1` and dot tokens, because they are
unnecessary.
- This also demonstrates that the comment about `Spacing::Alone` is
wrong -- that value is never used. That comment was added in #77250,
and AFAICT it has always been incorrect.
The commit also expands comments. I found this code hard to read
previously, the examples in comments make it easier.
Pass in the span for the field rather than using `prev_token`.
Also rename it `mk_expr_tuple_field_access`, because it doesn't do any
actual parsing, it just creates an expression with what it's given.
Not much of a clarity win by itself, but unlocks additional subsequent
simplifications.
Replace `mir_built` query with a hook and use mir_const everywhere instead
A small perf improvement due to less dep graph handling.
Mostly just a cleanup to get rid of one of our many mir queries
Previously, we only rewrote `&self` and `&mut self` receivers. By
instantiating the method from the trait definition, we can make this
work work with arbitrary legal receivers instead.
In user-facing Rust, `dyn` always has at least one predicate following
it. Unfortunately, because we filter out marker traits from receivers at
callsites and `dyn Sync` is, for example, legal, this results in us
having `dyn` types with no predicates on occasion in our alias set
encoding. This patch handles cases where there are no predicates in a
`dyn` type which are relevant to its alias set.
Fixes#122998
Unbox and unwrap the contents of `StatementKind::Coverage`
The payload of coverage statements was historically a structure with several fields, so it was boxed to avoid bloating `StatementKind`.
Now that the payload is a single relatively-small enum, we can replace `Box<Coverage>` with just `CoverageKind`.
This patch also adds a size assertion for `StatementKind`, to avoid accidentally bloating it in the future.
``@rustbot`` label +A-code-coverage
Fixed the `private-dependency` bug
Fixed the private-dependency bug: If the directly dependent crate is loaded last and is not configured with `--extern`, it may be incorrectly set to `private-dependency`
Fixes#122756
conditionally ignore fatal diagnostic in the SilentEmitter
This change is primarily meant to allow rustfmt to ignore all diagnostics when using the `SilentEmitter`. Back in #121301 the `SilentEmitter` was shared between rustc and rustfmt. This changed rustfmt's behavior from ignoring all diagnostic to emitting fatal diagnostics, which lead to https://github.com/rust-lang/rustfmt/issues/6109.
These changes allow rustfmt to maintain its previous behaviour when using the `SilentEmitter`, while allowing rustc code to still emit fatal diagnostics.
Encode implied predicates for traits
In #112629, we decided to make associated type bounds in the "supertrait" AST position *implied* even though they're not supertraits themselves.
This means that the `super_predicates` and `implied_predicates` queries now differ for regular traits. The assumption that they didn't differ was hard-coded in #107614, so in cross-crate positions this means that we forget the implied predicates from associated type bounds.
This isn't unsound, just kind of annoying. This should be backported since associated type bounds are slated to stabilize for 1.78 -- either that, or associated type bounds can be reverted on beta and re-shipped in 1.79 with this patch.
Fixes#122859
CFI: Strip auto traits off Virtual calls
We already use `Instance` at declaration sites when available to glean additional information about possible abstractions of the type in use. This does the same when possible at callsites as well.
The primary purpose of this change is to allow CFI to alter how it generates type information for indirect calls through `Virtual` instances.
This is needed for the "separate machinery" version of my approach to the vtable issues (#122573), because we need to respond differently to a `Virtual` call to the same type as a non-virtual call, specifically [stripping auto traits off the receiver's `Self`](54b15b0c36) because there isn't a separate vtable for `Foo` vs `Foo + Send`.
This would also make a more general underlying mechanism that could be used by rcvalle's [proposed drop detection / encoding](edcd1e20a1) if we end up using his approach, as we could condition out on the `def_id` in the CFI code rather than requiring the generating code to explicitly note whether it was calling drop.
CFI: Support self_cell-like recursion
Current `transform_ty` attempts to avoid cycles when normalizing `#[repr(transparent)]` types to their interior, but runs afoul of this pattern used in `self_cell`:
```
struct X<T> {
x: u8,
p: PhantomData<T>,
}
#[repr(transparent)]
struct Y(X<Y>);
```
When attempting to normalize Y, it will still cycle indefinitely. By using a types-visited list, this will instead get expanded exactly one layer deep to X<Y>, and then stop, not attempting to normalize `Y` any further.
This PR was split off from #121962 as part of fixing the larger vtable compatibility issues.
r? ``````@workingjubilee``````
Mention Register Size in `#[warn(asm_sub_register)]`
Fixes#121593
Displays the register size information obtained from `suggest_modifier()` and `default_modifier()`.
Handle str literals written with `'` lexed as lifetime
Given `'hello world'` and `'1 str', provide a structured suggestion for a valid string literal:
```
error[E0762]: unterminated character literal
--> $DIR/lex-bad-str-literal-as-char-3.rs:2:26
|
LL | println!('hello world');
| ^^^^
|
help: if you meant to write a `str` literal, use double quotes
|
LL | println!("hello world");
| ~ ~
```
```
error[E0762]: unterminated character literal
--> $DIR/lex-bad-str-literal-as-char-1.rs:2:20
|
LL | println!('1 + 1');
| ^^^^
|
help: if you meant to write a `str` literal, use double quotes
|
LL | println!("1 + 1");
| ~ ~
```
Fix#119685.
Fix validation on substituted callee bodies in MIR inliner
When inlining a coroutine, we will substitute the MIR body with the args of the call. There is code in the MIR validator that attempts to prevent query cycles, and will use the coroutine body directly when it detects that's the body that's being validated. That means that when inlining a coroutine body that has been substituted, it may no longer be parameterized over the original args of the coroutine, which will lead to substitution ICEs.
Fixes#119064
refactor check_{lang,library}_ub: use a single intrinsic
This enacts the plan I laid out [here](https://github.com/rust-lang/rust/pull/122282#issuecomment-1996917998): use a single intrinsic, called `ub_checks` (in aniticpation of https://github.com/rust-lang/compiler-team/issues/725), that just exposes the value of `debug_assertions` (consistently implemented in both codegen and the interpreter). Put the language vs library UB logic into the library.
This makes it easier to do something like https://github.com/rust-lang/rust/pull/122282 in the future: that just slightly alters the semantics of `ub_checks` (making it more approximating when crates built with different flags are mixed), but it no longer affects whether these checks can happen in Miri or compile-time.
The first commit just moves things around; I don't think these macros and functions belong into `intrinsics.rs` as they are not intrinsics.
r? `@saethlin`
Additional trait bounds beyond the principal trait and its implications
are not possible in the vtable. This means that if a receiver is
`&dyn Foo + Send`, the function will only be expecting `&dyn Foo`.
This strips those auto traits off before CFI encoding.
We already use `Instance` at declaration sites when available to glean
additional information about possible abstractions of the type in use.
This does the same when possible at callsites as well.
The primary purpose of this change is to allow CFI to alter how it
generates type information for indirect calls through `Virtual`
instances.
Rollup of 11 pull requests
Successful merges:
- #120577 (Stabilize slice_split_at_unchecked)
- #122698 (Cancel `cargo update` job if there's no updates)
- #122780 (Rename `hir::Local` into `hir::LetStmt`)
- #122915 (Delay a bug if no RPITITs were found)
- #122916 (docs(sync): normalize dot in fn summaries)
- #122921 (Enable more mir-opt tests in debug builds)
- #122922 (-Zprint-type-sizes: print the types of awaitees and unnamed coroutine locals.)
- #122927 (Change an ICE regression test to use the original reproducer)
- #122930 (add panic location to 'panicked while processing panic')
- #122931 (Fix some typos in the pin.rs)
- #122933 (tag_for_variant follow-ups)
r? `@ghost`
`@rustbot` modify labels: rollup
-Zprint-type-sizes: print the types of awaitees and unnamed coroutine locals.
This should assist comprehending the size of coroutines. In particular, whenever a future is suspended while awaiting another future, the latter is given the special name `__awaitee`, and now the type of the awaited future will be printed, allowing identifying caller/callee — er, I mean, poller/pollee — relationships.
It would be possible to include the type name in more cases, but I thought that that might be overly verbose (`print-type-sizes` is already a lot of text) and ordinary named fields or variables are easier for readers to discover the types of.
This change will also synergize with my other PR #122923 which changes type printing to print the path of the `async fn` instead of the span.
Implementation note: I'm not sure if `Symbol::intern` is appropriate for this application, but it was the obvious way to not have to remove the `Copy` implementation from `FieldInfo`, or add a `'tcx` lifetime, while avoiding keeping a lot of possibly redundant strings in memory. I don't know what the proper tradeoff to make here is (though presumably it is not too important for a `-Z` debugging option).
Rename `hir::Local` into `hir::LetStmt`
Follow-up of #122776.
As discussed on [zulip](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Improve.20naming.20of.20.60ExprKind.3A.3ALet.60.3F).
I made this change into a separate PR because I'm less sure about this change as is. For example, we have `visit_local` and `LocalSource` items. Is it fine to keep these two as is (I supposed it is but I prefer to ask) or not? Having `Node::Local(LetStmt)` makes things more explicit but is it going too far?
r? ```@oli-obk```
Let codegen decide when to `mem::swap` with immediates
Making `libcore` decide this is silly; the backend has so much better information about when it's a good idea.
Thus this PR introduces a new `typed_swap` intrinsic with a fallback body, and replaces that fallback implementation when swapping immediates or scalar pairs.
r? oli-obk
Replaces #111744, and means we'll never need more libs PRs like #111803 or #107140
The payload of coverage statements was historically a structure with several
fields, so it was boxed to avoid bloating `StatementKind`.
Now that the payload is a single relatively-small enum, we can replace
`Box<Coverage>` with just `CoverageKind`.
This patch also adds a size assertion for `StatementKind`, to avoid
accidentally bloating it in the future.
This should assist comprehending the size of coroutines.
In particular, whenever a future is suspended while awaiting another
future, the latter is given the special name `__awaitee`, and now the
type of the awaited future will be printed, allowing identifying
caller/callee — er, I mean, poller/pollee — relationships.
It would be possible to include the type name in more cases, but I
thought that that might be overly verbose (`print-type-sizes` is already
a lot of text) and ordinary named fields or variables are easier for
readers to discover the types of.
Current `transform_ty` attempts to avoid cycles when normalizing
`#[repr(transparent)]` types to their interior, but runs afoul of this
pattern used in `self_cell`:
```
struct X<T> {
x: u8,
p: PhantomData<T>,
}
#[repr(transparent)]
struct Y(X<Y>);
```
When attempting to normalize Y, it will still cycle indefinitely. By
using a types-visited list, this will instead get expanded exactly
one layer deep to X<Y>, and then stop, not attempting to normalize `Y`
any further.
Rollup of 8 pull requests
Successful merges:
- #114009 (compiler: allow transmute of ZST arrays with generics)
- #122195 (Note that the caller chooses a type for type param)
- #122651 (Suggest `_` for missing generic arguments in turbofish)
- #122784 (Add `tag_for_variant` query)
- #122839 (Split out `PredicatePolarity` from `ImplPolarity`)
- #122873 (Merge my contributor emails into one using mailmap)
- #122885 (Adjust better spastorino membership to triagebot's adhoc_groups)
- #122888 (add a couple more tests)
r? `@ghost`
`@rustbot` modify labels: rollup
Remove `TypeAndMut` from `ty::RawPtr` variant, make it take `Ty` and `Mutability`
Pretty much mechanically converting `ty::RawPtr(ty::TypeAndMut { ty, mutbl })` to `ty::RawPtr(ty, mutbl)` and its fallout.
r? lcnr
cc rust-lang/types-team#124
Split out `PredicatePolarity` from `ImplPolarity`
Because having to deal with a third `Reservation` level in all the trait solver code is kind of weird.
r? `@lcnr` or `@oli-obk`
Add `tag_for_variant` query
This query allows for sharing code between `rustc_const_eval` and `rustc_transmutability`. It's a precursor to a PR I'm working on to entirely replace the bespoke layout computations in `rustc_transmutability`.
r? `@compiler-errors`
Suggest `_` for missing generic arguments in turbofish
The compiler may suggest unusable generic type names for missing generic arguments in an expression context:
```rust
fn main() {
(0..1).collect::<Vec>()
}
```
> help: add missing generic argument
>
> (0..1).collect::<Vec<T>>()
but `T` is not a valid name in this context, and this suggestion won't compile.
I've changed it to use `_` inside method calls (turbofish), so it will suggest `(0..1).collect::<Vec<_>>()` which _may_ compile.
It's possible that the suggested `_` will be ambiguous, but there is very extensive E0283 that will help resolve that, which is more helpful than a basic "cannot find type `T` in this scope" users would get otherwise.
Out of caution to limit scope of the change I've limited it to just turbofish, but I suspect `_` could be the better choice in more cases. Perhaps in all expressions?
Note that the caller chooses a type for type param
```
error[E0308]: mismatched types
--> $DIR/return-impl-trait.rs:23:5
|
LL | fn other_bounds<T>() -> T
| - -
| | |
| | expected `T` because of return type
| | help: consider using an impl return type: `impl Trait`
| expected this type parameter
...
LL | ()
| ^^ expected type parameter `T`, found `()`
|
= note: expected type parameter `T`
found unit type `()`
= note: the caller chooses the type of T which can be different from ()
```
Tried to see if "expected this type parameter" can be replaced, but that goes all the way to `rustc_infer` so seems not worth the effort and can affect other diagnostics.
Revives #112088 and #104755.
compiler: allow transmute of ZST arrays with generics
Extend the `SizeSkeleton` evaluator to shortcut zero-sized arrays, thus considering `[T; 0]` to have a compile-time fixed-size of 0.
The existing evaluator already deals with generic arrays under the feature-guard `transmute_const_generics`. However, it merely allows comparing fixed-size types with fixed-size types, and generic types with generic types. For generic types, it merely compares whether their arguments match (ordering them first). Even if their exact sizes are not known at compile time, it can ensure that they will eventually be the same.
This patch extends this by shortcutting the size-evaluation of zero sized arrays and thus allowing size comparisons of `()` with `[T; 0]`, where one contains generics and the other does not.
This code is guarded by `transmute_const_generics` (#109929), even though it is unclear whether it should be. However, this assumes that a separate stabilization PR is required to move this out of the feature guard.
Initially reported in #98104.
With associated type bounds enabled, the implied_predicates and super_predicates
queries may differ for traits, since associated type bounds are also
implied but are not counted as super predicates.
"Handle" calls to upstream monomorphizations in compiler_builtins
This is pretty cooked, but I think it works.
compiler-builtins has a long-standing problem that at link time, its rlib cannot contain any calls to `core`. And yet, in codegen we _love_ inserting calls to symbols in `core`, generally from various panic entrypoints.
I intend this PR to attack that problem as completely as possible. When we generate a function call, we now check if we are generating a function call from `compiler_builtins` and whether the callee is a function which was not lowered in the current crate, meaning we will have to link to it.
If those conditions are met, actually generating the call is asking for a linker error. So we don't. If the callee diverges, we lower to an abort with the same behavior as `core::intrinsics::abort`. If the callee does not diverge, we produce an error. This means that compiler-builtins can contain panics, but they'll SIGILL instead of panicking. I made non-diverging calls a compile error because I'm guessing that they'd mostly get into compiler-builtins by someone making a mistake while working on the crate, and compile errors are better than linker errors. We could turn such calls into aborts as well if that's preferred.
This skips emitting extra arguments at every callsite (of which there
can be many). For a librustc_driver build with overflow checks enabled,
this cuts 0.7MB from the resulting binary.
Suggest `RUST_MIN_STACK` workaround on overflow
For some Rust crates, like p384, we can't do a whole lot about it even if the stack overflow is reported like in rust-lang/rust#122357 because the problem may be inside LLVM or another codegen backend. We can, however, suggest people set a new `RUST_MIN_STACK` value while handling the SIGSEGV, as that stack-setting will carry forward into the dylib.
As a bonus, this also leads to cleaning up the stack-setting code a bit.
coverage: Clean up marker statements that aren't needed later
Some of the marker statements used by coverage are added during MIR building for use by the InstrumentCoverage pass (during analysis), and are not needed afterwards.
```@rustbot``` label +A-code-coverage
interpret/allocation: fix aliasing issue in interpreter and refactor getters a bit
That new raw getter will be needed to let Miri pass pointers to natively executed FFI code ("extern-so" mode).
While doing that I realized our get_bytes_mut are named less scary than get_bytes_unchecked so I rectified that. Also I realized `mem_copy_repeatedly` would break if we called it for multiple overlapping copies so I made sure this does not happen.
And I realized that we are actually [violating Stacked Borrows in the interpreter](https://rust-lang.zulipchat.com/#narrow/stream/136281-t-opsem/topic/I.20think.20Miri.20violates.20Stacked.20Borrows.20.F0.9F.99.88).^^ That was introduced in https://github.com/rust-lang/rust/pull/87777.
r? ```@oli-obk```
Gracefully handle `AnonConst` in `diagnostic_hir_wf_check()`
Instead of running the WF check on the `AnonConst` itself we run it on the `ty` of the generic param of which the `AnonConst` is the default value.
Fixes#122199
Experimental feature postfix match
This has a basic experimental implementation for the RFC postfix match (rust-lang/rfcs#3295, #121618). [Liaison is](https://rust-lang.zulipchat.com/#narrow/stream/213817-t-lang/topic/Postfix.20Match.20Liaison/near/423301844) ```@scottmcm``` with the lang team's [experimental feature gate process](https://github.com/rust-lang/lang-team/blob/master/src/how_to/experiment.md).
This feature has had an RFC for a while, and there has been discussion on it for a while. It would probably be valuable to see it out in the field rather than continue discussing it. This feature also allows to see how popular postfix expressions like this are for the postfix macros RFC, as those will take more time to implement.
It is entirely implemented in the parser, so it should be relatively easy to remove if needed.
This PR is split in to 5 commits to ease review.
1. The implementation of the feature & gating.
2. Add a MatchKind field, fix uses, fix pretty.
3. Basic rustfmt impl, as rustfmt crashes upon seeing this syntax without a fix.
4. Add new MatchSource to HIR for Clippy & other HIR consumers
Some of the marker statements used by coverage are added during MIR building
for use by the InstrumentCoverage pass (during analysis), and are not needed
afterwards.
CFI: Skip non-passed arguments
Rust will occasionally rely on fn((), X) -> Y being compatible with fn(X) -> Y, since () is a non-passed argument. Relax CFI by choosing not to encode non-passed arguments.
This PR was split off from #121962 as part of fixing the larger vtable compatibility issues.
r? `@workingjubilee`
This makes it easier to read the trait definition for newcomers:
Sorted from least “complex” to most “complex” followed by trivial “plumbing”
and grouped by area.
* Move `allow_infer` above all `*_infer` methods
* It's the least complex method of those
* Allows the `*_infer` to be placed right next to each other
* Move `probe_ty_param_bounds` further down right next to `lower_assoc_ty` and `probe_adt`
* It's more complex than the `infer` methods, it should come “later”
* Now all required lowering functions are grouped together
* Move the “plumbing” function `set_tainted_by_errors` further down
below any actual lowering methods.
* Provided method should come last
Most of the tracing calls didn't fully leverage the power of `tracing`.
For example, several of them used to hard-code method names / tracing spans
as well as variable names. Use `#[instrument]` and `?var` / `%var` (etc.) instead.
In my opinion, this is the proper way to migrate them from the old
AstConv nomenclature to the new HIR ty lowering one.
Several (doc) comments were super outdated or didn't provide enough context.
Some doc comments shoved everything in a single paragraph without respecting
the fact that the first paragraph should be a single sentence because rustdoc
treats these as item descriptions / synopses on module pages.
Remove SpecOptionPartialEq
With the recent LLVM bump, the specialization for Option::partial_eq on types with niches is no longer necessary. I kept the manual implementation as it still gives us better codegen than the derive (will look at this seperately).
Also implemented PartialOrd/Ord by hand as it _somewhat_ improves codegen for #49892: https://godbolt.org/z/vx5Y6oW4Y
Add a never type option to make diverging blocks `()`
More experiments for ~~the blood god~~ T-lang!
Usage example:
```rust
#![allow(internal_features)]
#![feature(never_type, rustc_attrs)]
#![rustc_never_type_options(diverging_block_default = "unit")]
fn main() {
let _: u8 = { //~ error: expected `u8`, found `()`
return;
};
}
```
r? compiler-errors
I'm not sure how I feel about parsing the attribute every time we create `FnCtxt`. There must be a better way to do this, right?
Rust will occasionally rely on fn((), X) -> Y being compatible with
fn(X) -> Y, since () is a non-passed argument. Relax CFI by choosing not
to encode non-passed arguments.
Remove `target_override`
Because the "target can override the backend" and "backend can override the target" situation is a mess. Details in the individual commits.
r? `@WaffleLapkin`
Implement macro-based deref!() syntax for deref patterns
Stop using `box PAT` syntax for deref patterns, and instead use a perma-unstable macro.
Blocked on #122222
r? `@Nadrieril`
Interpolated cleanups
Various cleanups I made while working on attempts to remove `Interpolated`, that are worth merging now. Best reviewed one commit at a time.
r? `@petrochenkov`
Strip placeholders from hidden types before remapping generic parameter
When remapping generic parameters in the hidden type to the generic parameters of the definition of the opaque, we assume that placeholders cannot exist. Instead of just patching that site, I decided to handle it earlier, directly in `infer_opaque_types`, where we are already doing all the careful lifetime handling.
fixes#122694
the reason that ICE now occurred was that we stopped treating `operation` as being in the defining scope, so the TAIT became part of the hidden type of the `async fn`'s opaque type instead of just bailing out as ambiguos
I think
```rust
use std::future::Future;
mod foo {
type FutNothing<'a> = impl 'a + Future<Output = ()>;
//~^ ERROR: unconstrained opaque type
}
async fn operation(_: &mut ()) -> () {
//~^ ERROR: concrete type differs from previous
call(operation).await
//~^ ERROR: concrete type differs from previous
}
async fn call<F>(_f: F)
where
for<'any> F: FnMut(&'any mut ()) -> foo::FutNothing<'any>,
{
//~^ ERROR: expected generic lifetime parameter, found `'any`
}
```
would have already had the same ICE before https://github.com/rust-lang/rust/pull/121796
pattern analysis: add a custom test harness
There are two features of the pattern analysis code that are hard to test: the newly-added pattern complexity limit, and the computation of arm intersections. This PR adds some crate-specific tests for that, including an unmaintainable but pretty macro to help construct patterns.
r? `````@compiler-errors`````
Make `#[diagnostic::on_unimplemented]` format string parsing more robust
This commit fixes several issues with the format string parsing of the `#[diagnostic::on_unimplemented]` attribute that were pointed out by `@ehuss.`
In detail it fixes:
* Appearing format specifiers (display, etc). For these we generate a warning that the specifier is unsupported. Otherwise we ignore them
* Positional arguments. For these we generate a warning that positional arguments are unsupported in that location and replace them with the format string equivalent (so `{}` or `{n}` where n is the index of the positional argument)
* Broken format strings with enclosed }. For these we generate a warning about the broken format string and set the emitted message literally to the provided unformatted string
* Unknown format specifiers. For these we generate an additional warning about the unknown specifier. Otherwise we emit the literal string as message.
This essentially makes those strings behave like `format!` with the minor difference that we do not generate hard errors but only warnings. After that we continue trying to do something unsuprising (mostly either ignoring the broken parts or falling back to just giving back the literal string as provided).
Fix#122391
r? `@compiler-errors`
Use MSVC-style escaping when passing a response/@ file to lld on windows
LLD parses @ files like the command arguments on the platform it's on, so on windows it needs to follow the MSVC style to work correctly. Otherwise builds can fail if the linker command gets too long and the build path contains spaces.
Make `type_ascribe!` not a built-in
The only weird thing is the macro expansion note. I wonder if we should suppress these 🤔
r? ````@fmease```` since you told me about builtin# lol
Fix misc printing issues in emit=stable_mir
Trying to continue the work that ````@ouz-a```` started here: https://github.com/rust-lang/rust/pull/118364
Few modifications beyond fixes:
1. I made the `pretty_*` functions private.
2. I added a function to print the instance body
3. Changed a bunch of signatures to write to the writer directly.
4. Added a function to translate the place to its internal representation, so we could use the internal debug implementation.
5. Also removed `pretty_ty`, replaced by Display implementation of Ty which uses the internal display.
Add bare metal riscv32 target.
I asked in the embedded Rust matrix if it would be OK to clone a PR to add another riscv32 configuration. The riscv32ima in this case. ``````@MabezDev`````` was open to this suggestion as a maintainer for the Riscv targets.
I now took https://github.com/rust-lang/rust/pull/117958/ for inspiration and added/edited the appropriate files.
# [Tier 3 target policy](https://doc.rust-lang.org/nightly/rustc/target-tier-policy.html#tier-3-target-policy)
> At this tier, the Rust project provides no official support for a target, so we place minimal requirements on the introduction of targets.
>
> A proposed new tier 3 target must be reviewed and approved by a member of the compiler team based on these requirements. The reviewer may choose to gauge broader compiler team consensus via a [Major Change Proposal (MCP)](https://forge.rust-lang.org/compiler/mcp.html).
>
> A proposed target or target-specific patch that substantially changes code shared with other targets (not just target-specific code) must be reviewed and approved by the appropriate team for that shared code before acceptance.
> * A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
The target being added is using riscv32 as a basis, with added extensions. The riscv32 targets already have a maintainer and are named in the description file.
> * Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
> * Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
> * If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known to cause issues in Cargo.
Name is derived from the extensions used in the target.
> * Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
> * The target must not introduce license incompatibilities.
Same conditions apply compared to other riscv32 targets.
> * Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Same conditions apply compared to other riscv32 targets.
> * The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
Same conditions apply compared to other riscv32 targets.
> * Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
Same conditions apply compared to other riscv32 targets.
> * "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
Same conditions apply compared to other riscv32 targets.
> * Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
> * This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
Same conditions apply compared to other riscv32 targets.
> * Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This target is build on top of existing riscv32 targets and inherits these implementations.
> * The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
The documentation of this target is shared along with targets that target riscv32 with a different configuration of extensions.
> * Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via ``````@)`````` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
I now understand, apologies for the mention before.
> * Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
I now understand, apologies for the link to a similar PR before.
> * Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> * In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
This should not cause issues, as the target has similarities to other configurations of the riscv32 targets.
> * Tier 3 targets must be able to produce assembly using at least one of rustc's supported backends from any host target.
This should not cause issues, as the target has similarities to other configurations of the riscv32 targets.
Don't ICE when encountering bound regions in generator interior type
I'm pretty sure this meant to say "`has_free_regions`", probably just a typo in 4a4fc3bb5b. We can have bound regions (because we only convert non-bound regions into existential regions in generator interiors), but we can't have (non-ReErased) free regions.
r? lcnr
deref patterns: bare-bones feature gate and typechecking
I am restarting the deref patterns experimentation. This introduces a feature gate under the lang-team [experimental feature](https://github.com/rust-lang/lang-team/blob/master/src/how_to/experiment.md) process, with [````@cramertj```` as lang-team liaison](https://github.com/rust-lang/lang-team/issues/88) (it's been a while though, you still ok with this ````@cramertj?).```` Tracking issue: https://github.com/rust-lang/rust/issues/87121.
This is the barest-bones implementation I could think of:
- explicit syntax, reusing `box <pat>` because that saves me a ton of work;
- use `Deref` as a marker trait (instead of a yet-to-design `DerefPure`);
- no support for mutable patterns with `DerefMut` for now;
- MIR lowering will come in the next PR. It's the trickiest part.
My goal is to let us figure out the MIR lowering part, which might take some work. And hopefully get something working for std types soon.
This is in large part salvaged from ````@fee1-dead's```` https://github.com/rust-lang/rust/pull/119467.
r? ````@compiler-errors````
Inline a bunch of trivial conditions in parser
It is often the case that these small, conditional functions, when inlined, reveal notable optimization opportunities to LLVM. While saethlin has done a lot of good work on making these kinds of small functions not need `#[inline]` tags as much, being clearer about what we want inlined will get both the MIR opts and LLVM to pursue it more aggressively.
On local perf runs, this seems fruitful. Let's see what rust-timer says.
r? `@ghost`
recursively evaluate the constants in everything that is 'mentioned'
This is another attempt at fixing https://github.com/rust-lang/rust/issues/107503. The previous attempt at https://github.com/rust-lang/rust/pull/112879 seems stuck in figuring out where the [perf regression](https://perf.rust-lang.org/compare.html?start=c55d1ee8d4e3162187214692229a63c2cc5e0f31&end=ec8de1ebe0d698b109beeaaac83e60f4ef8bb7d1&stat=instructions:u) comes from. In https://github.com/rust-lang/rust/pull/122258 I learned some things, which informed the approach this PR is taking.
Quoting from the new collector docs, which explain the high-level idea:
```rust
//! One important role of collection is to evaluate all constants that are used by all the items
//! which are being collected. Codegen can then rely on only encountering constants that evaluate
//! successfully, and if a constant fails to evaluate, the collector has much better context to be
//! able to show where this constant comes up.
//!
//! However, the exact set of "used" items (collected as described above), and therefore the exact
//! set of used constants, can depend on optimizations. Optimizing away dead code may optimize away
//! a function call that uses a failing constant, so an unoptimized build may fail where an
//! optimized build succeeds. This is undesirable.
//!
//! To fix this, the collector has the concept of "mentioned" items. Some time during the MIR
//! pipeline, before any optimization-level-dependent optimizations, we compute a list of all items
//! that syntactically appear in the code. These are considered "mentioned", and even if they are in
//! dead code and get optimized away (which makes them no longer "used"), they are still
//! "mentioned". For every used item, the collector ensures that all mentioned items, recursively,
//! do not use a failing constant. This is reflected via the [`CollectionMode`], which determines
//! whether we are visiting a used item or merely a mentioned item.
//!
//! The collector and "mentioned items" gathering (which lives in `rustc_mir_transform::mentioned_items`)
//! need to stay in sync in the following sense:
//!
//! - For every item that the collector gather that could eventually lead to build failure (most
//! likely due to containing a constant that fails to evaluate), a corresponding mentioned item
//! must be added. This should use the exact same strategy as the ecollector to make sure they are
//! in sync. However, while the collector works on monomorphized types, mentioned items are
//! collected on generic MIR -- so any time the collector checks for a particular type (such as
//! `ty::FnDef`), we have to just onconditionally add this as a mentioned item.
//! - In `visit_mentioned_item`, we then do with that mentioned item exactly what the collector
//! would have done during regular MIR visiting. Basically you can think of the collector having
//! two stages, a pre-monomorphization stage and a post-monomorphization stage (usually quite
//! literally separated by a call to `self.monomorphize`); the pre-monomorphizationn stage is
//! duplicated in mentioned items gathering and the post-monomorphization stage is duplicated in
//! `visit_mentioned_item`.
//! - Finally, as a performance optimization, the collector should fill `used_mentioned_item` during
//! its MIR traversal with exactly what mentioned item gathering would have added in the same
//! situation. This detects mentioned items that have *not* been optimized away and hence don't
//! need a dedicated traversal.
enum CollectionMode {
/// Collect items that are used, i.e., actually needed for codegen.
///
/// Which items are used can depend on optimization levels, as MIR optimizations can remove
/// uses.
UsedItems,
/// Collect items that are mentioned. The goal of this mode is that it is independent of
/// optimizations: the set of "mentioned" items is computed before optimizations are run.
///
/// The exact contents of this set are *not* a stable guarantee. (For instance, it is currently
/// computed after drop-elaboration. If we ever do some optimizations even in debug builds, we
/// might decide to run them before computing mentioned items.) The key property of this set is
/// that it is optimization-independent.
MentionedItems,
}
```
And the `mentioned_items` MIR body field docs:
```rust
/// Further items that were mentioned in this function and hence *may* become monomorphized,
/// depending on optimizations. We use this to avoid optimization-dependent compile errors: the
/// collector recursively traverses all "mentioned" items and evaluates all their
/// `required_consts`.
///
/// This is *not* soundness-critical and the contents of this list are *not* a stable guarantee.
/// All that's relevant is that this set is optimization-level-independent, and that it includes
/// everything that the collector would consider "used". (For example, we currently compute this
/// set after drop elaboration, so some drop calls that can never be reached are not considered
/// "mentioned".) See the documentation of `CollectionMode` in
/// `compiler/rustc_monomorphize/src/collector.rs` for more context.
pub mentioned_items: Vec<Spanned<MentionedItem<'tcx>>>,
```
Fixes#107503
This commit fixes several issues with the format string parsing of the
`#[diagnostic::on_unimplemented]` attribute that were pointed out by
@ehuss.
In detail it fixes:
* Appearing format specifiers (display, etc). For these we generate a
warning that the specifier is unsupported. Otherwise we ignore them
* Positional arguments. For these we generate a warning that positional
arguments are unsupported in that location and replace them with the
format string equivalent (so `{}` or `{n}` where n is the index of the
positional argument)
* Broken format strings with enclosed }. For these we generate a warning
about the broken format string and set the emitted message literally to
the provided unformatted string
* Unknown format specifiers. For these we generate an additional warning
about the unknown specifier. Otherwise we emit the literal string as
message.
This essentially makes those strings behave like `format!` with the
minor difference that we do not generate hard errors but only warnings.
After that we continue trying to do something unsuprising (mostly either
ignoring the broken parts or falling back to just giving back the
literal string as provided).
Fix#122391
Split an item bounds and an item's super predicates
This is the moral equivalent of #107614, but instead for predicates this applies to **item bounds**. This PR splits out the item bounds (i.e. *all* predicates that are assumed to hold for the alias) from the item *super predicates*, which are the subset of item bounds which share the same self type as the alias.
## Why?
Much like #107614, there are places in the compiler where we *only* care about super-predicates, and considering predicates that possibly don't have anything to do with the alias is problematic. This includes things like closure signature inference (which is at its core searching for `Self: Fn(..)` style bounds), but also lints like `#[must_use]`, error reporting for aliases, computing type outlives predicates.
Even in cases where considering all of the `item_bounds` doesn't lead to bugs, unnecessarily considering irrelevant bounds does lead to a regression (#121121) due to doing extra work in the solver.
## Example 1 - Trait Aliases
This is best explored via an example:
```
type TAIT<T> = impl TraitAlias<T>;
trait TraitAlias<T> = A + B where T: C;
```
The item bounds list for `Tait<T>` will include:
* `Tait<T>: A`
* `Tait<T>: B`
* `T: C`
While `item_super_predicates` query will include just the first two predicates.
Side-note: You may wonder why `T: C` is included in the item bounds for `TAIT`? This is because when we elaborate `TraitAlias<T>`, we will also elaborate all the predicates on the trait.
## Example 2 - Associated Type Bounds
```
type TAIT<T> = impl Iterator<Item: A>;
```
The `item_bounds` list for `TAIT<T>` will include:
* `Tait<T>: Iterator`
* `<Tait<T> as Iterator>::Item: A`
But the `item_super_predicates` will just include the first bound, since that's the only bound that is relevant to the *alias* itself.
## So what
This leads to some diagnostics duplication just like #107614, but none of it will be user-facing. We only see it in the UI test suite because we explicitly disable diagnostic deduplication.
Regarding naming, I went with `super_predicates` kind of arbitrarily; this can easily be changed, but I'd consider better names as long as we don't block this PR in perpetuity.
Fix bad span for explicit lifetime suggestions
Fixes#121267
Current explicit lifetime suggestions are not showing correct spans for some lifetimes - e.g. elided lifetime generic parameters;
This should be done correctly regarding elided lifetime kind like the following code
43fdd4916d/compiler/rustc_resolve/src/late/diagnostics.rs (L3015-L3044)
Backend and target selection is a mess: the target can override the
backend (via `Target::default_codegen_backend`), *and* the backend can
override the target (via `CodegenBackend::target_override`).
The code that handles this is ugly. It calls `build_target_config`
twice, once before getting the backend and once again afterward. It also
must check that both overrides aren't triggering at the same time.
This commit removes the latter override. It's used in rust-gpu but
@eddyb said via Zulip that removing it would be ok. This simplifies the
code greatly, and will allow some nice follow-up refactorings.
coverage: Remove incorrect assertions from counter allocation
These assertions detect situations where a BCB node (in the coverage graph) would have both a physical counter and one or more in-edge counters/expressions.
For most BCBs that situation would indicate an implementation bug. However, it's perfectly fine in the case of a BCB having an edge that loops back to itself.
Given the complexity and risk involved in fixing the assertions, and the fact that nothing relies on them actually being true, this patch just removes them instead.
Fixes#122738.
`````@rustbot````` label +A-code-coverage
Ignore paths from expansion in `unused_qualifications`
If any of the path segments are from an expansion the lint is skipped currently, but a path from an expansion where all of the segments are passed in would not be. Doesn't seem that likely to occur but it could happen
LLD parses @ files like the command arguments on the platform it's on,
so on windows it needs to follow the MSVC style to work correctly.
Otherwise builds can fail if the linker command gets too long and the
build path contains spaces.
It uses very old language that is more confusing today than helpful,
including references to `SubstNt` that no longer exists. The comment
above `TokenStream` is better, and suffices for a basic understanding of
these types.
This commit combines `MatchedTokenTree` and `MatchedNonterminal`, which
are often considered together, into a single `MatchedSingle`. It shares
a representation with the newly-parameterized `ParseNtResult`.
This will also make things much simpler if/when variants from
`Interpolated` start being moved to `ParseNtResult`.
