Change `bindings_with_variant_name` to deny-by-default
Changed the `bindings_with_variant_name` lint to deny-by-default and fixed up the affected tests.
Addresses #103442.
[drop tracking] Visit break expressions
This fixes https://github.com/rust-lang/rust/issues/102383 by remembering to visit the expression in `break expr` when building the drop tracking CFG. Missing this step was causing an off-by-one error which meant after a number of awaits we'd be
looking for dropped values at the wrong point in the code.
Additionally, this changes the order of traversal for assignment expressions to visit the rhs and then the lhs. This matches what is done elsewhere.
Finally, this improves some of the debugging output (for example, the CFG visualizer) to make it easier to figure out these sorts of issues.
Added const-generic ui test case for issue #106419
This PR adds a test case for #106419 which has been fixed in master by #105292
I also ran the test on f769d34291 (the commit before #105292 was merged)
and it did fail there with the following output.
```
--- stderr -------------------------------
error[E0308]: mismatched types
--> /home/patrikk/src/rust/src/test/ui/const-generics/issue-106419-struct-with-multiple-const-params.rs:5:10
|
LL | #[derive(Clone)]
| ^^^^^
| |
| expected `A`, found `B`
| expected `Bar<A, B>` because of return type
|
= note: expected struct `Bar<A, _>`
found struct `Bar<B, _>`
= note: this error originates in the derive macro `Clone` (in Nightly builds, run with -Z macro-backtrace for more info)
error: aborting due to previous error
For more information about this error, try `rustc --explain E0308`.
------------------------------------------
```
Recognise double-equals homoglyph
Recognise `⩵` as a homoglyph for `==`.
The first commit switches `char` to `&str`, as all previous homoglyphs corresponded to a single ASCII character, while the second implements the fix.
`@rustbot` label +A-diagnostics +A-parser
Don't treat closures from other crates as local
fixes#104817
r? `@lcnr`
Specialization can prefer an impl for an opaque type over a blanket impls that also matches. If the blanket impl only applies if an auto-trait applies, we look at the hidden type of the opaque type to see if that implements the auto trait. The hidden type can be a closure or generator, and thus we will end up seeing these types in coherence and have to handle them properly.
Don't wf-check non-local RPITs
We were using `ty::is_impl_trait_defn(..).is_none()` to check if we need to add WF obligations for an opaque type.
This is *supposed* to be checking if the type is a TAIT, since RPITs' wfness is implied by wf checking its parent item, but since `is_impl_trait_defn` returns `None` for non-local RPIT and async futures, we unnecessarily consider wf predicates for an RPIT if it is coming from a foreign crate.
Fixes#107036
r? `@oli-obk` but feel free to reassign
even more unify Projection/Opaque handling in region outlives code
edit: This continues ate the same pace as #106829. New changes are described in https://github.com/rust-lang/rust/pull/106910#issuecomment-1383251254.
~This touches `OutlivesBound`, `Component`, `GenericKind` enums.~
r? `@oli-obk` (because of overlap with #95474)
document + UI test `E0208` and make its output more user-friendly
Cleans up `E0208`'s output a lot. It could actually be useful for someone learning about variance now. I also added a UI test for it in `tests/ui/error-codes/` and wrote some docs for it.
r? `@GuillaumeGomez` another error code, can't be bothered to find the issue :P. Obviously there's some compiler stuff, so you'll have to hand it off.
Part of https://github.com/rust-lang/rust/issues/61137.
make `CastError::NeedsDeref` create a `MachineApplicable` suggestion
Fixes#106903
Simple impl for the linked issue. I also made some other small changes:
- `CastError::ErrorGuaranteed` now owns an actual `ErrorGuaranteed`. This better enforces the static guarantees of `ErrorGuaranteed`.
- `CastError::NeedDeref` code simplified a bit, we now just suggest the `*`, instead of the whole expression as well.
Rollup of 8 pull requests
Successful merges:
- #105796 (rustdoc: simplify JS search routine by not messing with lev distance)
- #106753 (Make sure that RPITITs are not considered suggestable)
- #106917 (Encode const mir for closures if they're const)
- #107004 (Implement some candidates for the new solver (redux))
- #107023 (Stop using `BREAK` & `CONTINUE` in compiler)
- #107030 (Correct typo)
- #107042 (rustdoc: fix corner cases with "?" JS keyboard command)
- #107045 (rustdoc: remove redundant CSS rule `#settings .setting-line`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Revert "Improve heuristics whether `format_args` string is a source literal"
This reverts commit e6c02aad93 (from #106195).
Keeps the code improvements from the PR and the test (as a known-bug).
Works around #106408 while a proper fix is discussed more thoroughly in #106505, as proposed by `@tmandry.`
Reopens#106191
r? compiler-errors
Do not filter substs in `remap_generic_params_to_declaration_params`.
The relevant filtering should have been performed by borrowck.
Fixes https://github.com/rust-lang/rust/issues/105826
r? types
dont randomly use `_` to print out const generic arguments
const generics seem to get printed out as `_` for no reason a lot of the time, as someone who spends a lot of time with const generics this has gotten ✨ very annoying ✨. Latest example would be #106423 where the ICE messaged formatted a `ty::Const` containing no infer vars, as `_`.
For some reason printing of the const argument on arrays was custom instead of using the existing logic for printing `ty::Const`. Additionally the existing logic for printing `ty::Const` would print out `_` for anon consts that are in a separate crate leading to weird diagnostics (see second commit). There ought to be less cases of consts randomly getting printed as `_` hiding valuable info now.
Add 'static lifetime suggestion when GAT implied 'static requirement from HRTB
Fix for issue #105507
The problem:
When generic associated types (GATs) are from higher-ranked trait bounds (HRTB), they are implied 'static requirement (see
[Implied 'static requirement from higher-ranked trait bounds](https://blog.rust-lang.org/2022/10/28/gats-stabilization.html#implied-static-requirement-from-higher-ranked-trait-bounds) for more details). If the user did not explicitly specify the `'static` lifetime when using the GAT, the current error message will only point out the type `does not live long enough` where the type is used, but not where the GAT is specified and how to fix the problem.
The solution:
Add notes at the span where the problematic GATs are specified and suggestions of how to fix the problem by adding `'static` lifetime at the right spans.
Constify `TypeId` ordering impls
Tracking issue: #101871
Adding const ordering to `TypeId` allows rtti crates to optimize some casting scenarios (without transmuting to `u64`). This would also prevent these crates from breaking if the underlying type is changed from `u64` to something different.
Feature gate: `#![feature(const_cmp_type_id)]`
fix: don't emit `E0711` if `staged_api` not enabled
Fixes#106589
Simple fix, added UI test.
As an aside, it seems a lot of features are susceptible to this, `E0711` stands out to me because it's perma-unstable and we are effectively exposing an implementation detail.
make error emitted on `impl &Trait` nicer
Fixes#106694
Turned out to be simpler than I thought, also added UI test.
Before: ([playground](https://play.rust-lang.org/?version=stable&mode=debug&edition=2021&gist=9bda53271ef3a8886793cf427b8cea91))
```text
error: expected one of `:`, ``@`,` or `|`, found `)`
--> src/main.rs:2:22
|
2 | fn foo(_: impl &Trait) {}
| ^ expected one of `:`, ``@`,` or `|`
|
= note: anonymous parameters are removed in the 2018 edition (see RFC 1685)
help: if this is a parameter name, give it a type
|
2 | fn foo(_: impl Trait: &TypeName) {}
| ~~~~~~~~~~~~~~~~
help: if this is a type, explicitly ignore the parameter name
|
2 | fn foo(_: impl _: &Trait) {}
| ++
error: expected one of `!`, `(`, `)`, `,`, `?`, `for`, `~`, lifetime, or path, found `&`
--> src/main.rs:2:16
|
2 | fn foo(_: impl &Trait) {}
| -^ expected one of 9 possible tokens
| |
| help: missing `,`
error: expected one of `!`, `(`, `,`, `=`, `>`, `?`, `for`, `~`, lifetime, or path, found `&`
--> src/main.rs:3:11
|
3 | fn bar<T: &Trait>(_: T) {}
| ^ expected one of 10 possible tokens
```
After:
```text
error: expected a trait, found type
--> <anon>:2:16
|
2 | fn foo(_: impl &Trait) {}
| -^^^^^
| |
| help: consider removing the indirection
error: expected a trait, found type
--> <anon>:3:11
|
3 | fn bar<T: &Trait>(_: T) {}
| -^^^^^
| |
| help: consider removing the indirection
```
suggestion for attempted integer identifier in patterns
Fixes#106552
Implemented a suggestion on `E0005` that occurs when no bindings are present and the pattern is a literal integer.
Heuristically undo path prefix mappings.
Because the compiler produces better diagnostics if it can find the source of (potentially remapped) dependencies.
The new test fails without the other changes in this PR. Let me know if you have better suggestions for the test directory. I moved the existing remapping test to be in the same location as the new one.
Some more context: I'm exploring running UI tests with remapped paths by default in https://github.com/rust-lang/rust/pull/105924 and this was one of the issues discovered.
This may also be useful in the context of https://github.com/rust-lang/rfcs/pull/3127 ("New rustc and Cargo options to allow path sanitisation by default").
Emit only one nbsp error per file
Fixes#106101.
See https://github.com/rust-lang/rust/issues/106098 for an explanation of how someone would end up with a large number of these nbsp characters in their source code, which is why I think rustc needs to handle this specific case in a friendlier way.
suggest `is_empty` for collections when casting to `bool`
Fixes#106883
Matches on slices, `String` and `str`. It would be nice to do this with something like `Deref<Target=str>` as well, but AFAIK it's not possible in this part of the compiler.
Consolidate two almost duplicated fn info extraction routines
Moves `extract_callable_info` up to trait selection, because it was being (almost) duplicated fully there for similar diagnostic purposes. This also generalizes the diagnostics we can give slightly (see UI test).
Suggestion for type mismatch when we need a u8 but the programmer wrote a char literal
Today Rust just points out that we have a char and we need a u8, but if I wrote 'A' then I could fix this by just writing b'A' instead. This code should detect the case where we're about to report a type mismatch of this kind, and the programmer wrote a char literal, and the char they wrote is ASCII, so therefore just prefixing b to make a byte literal will do what they meant.
I have definitely written this mistake more than once, it's not difficult to figure out what to do, but the compiler might as well tell us anyway.
I provided a test with two simple examples where the suggestion is appropriate, and one where it is not because the char literal is not ASCII, showing that the suggestion is only triggered in the former cases.
I have contributed only a small typo doc fix before, so this is my first substantive rustc change.
Emit a hint for bad call return types due to generic arguments
When the return type of a function call depends on the type of an argument, e.g.
```
fn foo<T>(x: T) -> T {
x
}
```
and the expected type is set due to either an explicitly typed binding, or because the call to the function is in a tail position without semicolon, the current error implies that the argument in the call has the wrong type.
This new hint highlights that the expected type doesn't match the returned type, which matches the argument type, and that that's why we're flagging the argument type.
Fixes#43608.
Add note when `FnPtr` vs. `FnDef` impl trait
I encountered an instance where an `FnPtr` implemented a trait, but I was passing an `FnDef`. I was confused for an hour and to examine the source code of the trait's crate's tests in order to understand how to cast it properly (it didn't help that it was behind a reference). To the end user, it might not be immediately obvious that they are different and how to convert from an `FnDef` to an `FnPtr`, but it is necessary to cast to the generic function in order to compile. It is thus useful to suggest `as` in the help note, (even if the `Fn` output implements the trait).
Emit a single error for contiguous sequences of unknown tokens
Closes#106101
On encountering a sequence of identical source characters which are unknown tokens, note the amount of subsequent characters and advance past them silently. The old behavior was to emit an error and 'help' note for every single one.
`@rustbot` label +A-diagnostics +A-parser
I encountered an instance where an `FnPtr` implemented a trait, but I was passing an `FnDef`. To
the end user, there is really no way to differentiate each of them, but it is necessary to cast
to the generic function in order to compile. It is thus useful to suggest `as` in the help note,
(even if the Fn output implements the trait).
Update `rental` hack to work with remapped paths.
This PR simply switches to an already-existing helper instead of hard-coding a specific enum variant. The new revision of the test fails without the other changes in this PR.
Context: I'm exploring running UI tests with remapped paths by default in #105924 and the rental test was one of the ones that failed.
This may also be useful in the context of https://github.com/rust-lang/rfcs/pull/3127 ("New rustc and Cargo options to allow path sanitisation by default").
Normalize test output more thoroughly
This prevents differences in local environments, which may (for example) end up with a longer backtrace with more digits in the backtrace prefix, as happened to me. While we're at it, clean more of the output up, including the exact location of the error in the compiler.
cc https://github.com/rust-lang/rust/pull/106521 which introduced this test
Warn when using panic-strategy abort for proc-macro crates
See https://github.com/rust-lang/rust/issues/82320, this simply warns for now as that seems like the best step that can be immediately taken (opposed to straight up rejecting or ignoring)
Bump `IMPLIED_BOUNDS_ENTAILMENT` to Deny + ReportNow
https://github.com/rust-lang/rust/pull/105575#issuecomment-1357201969
> and then later in the same cycle increase the lint to `deny` and change it to `FutureCompatReportNow` in this nightly cycle.
r? ```@lcnr``` when they're back from holiday 😄
Add log-backtrace option to show backtraces along with logging
according to #90698, I added a compiler option, `-Zlog-backtrace=filter`, where `filter` is a module name, to show backtraces for logging without rebuilding.
resolve#90698
Render missing generics suggestion verbosely
It's a bit easier to read like this, especially ones that are appending new generics onto an existing list, like ": `, T`" which render somewhat poorly inline.
Also don't suggest `dyn` as a type parameter to add, even if technically that's valid in edition 2015.
When the return type of a function call depends on the type of an
argument, e.g.
```
fn foo<T>(x: T) -> T {
x
}
```
and the expected type is set due to either an explicitly typed
binding, or because the call to the function is in a tail position
without semicolon, the current error implies that the argument in the
call has the wrong type.
This new hint highlights that the expected type doesn't match the
returned type, which matches the argument type, and that that's why
we're flagging the argument type.
Fixes#43608.
This prevents differences in local environments, which may (for example)
end up with a longer backtrace with more digits in the backtrace prefix,
as happened to me. While we're at it, clean more of the output up,
including the exact location of the error in the compiler.
Revert "Make nested RPITIT inherit the parent opaque's generics."
This reverts commit e2d41f4c97, and adjusts the `tests/ui/async-await/in-trait/nested-rpit.rs` test.
r? `@cjgillot`
fixes#106332, manually verified because it had no minimization :/
reopens#105197
cc #106729
Mark ZST as FFI-safe if all its fields are PhantomData
This presents one possible solution to issue: #106629.
This is my first (tentative) contribution to the compiler itself.
I'm looking forward for comments and feedback
Closes: #106629
Handle inference variables in `CollectAllMismatches` correctly
1. Fix#106240
2. Treat int/float type variables correctly (see `src/test/ui/iterators/invalid-iterator-chain-with-int-infer.rs`), so we can point out things like "`Iterator::Item` changed to `{integer}` here"
Migrate mir_build diagnostics 2 of 3
The first three commits are fairly boring, however I've made some changes to the output of the match checking diagnostics.
Stabilize `::{core,std}::pin::pin!`
As discussed [over here](https://github.com/rust-lang/rust/issues/93178#issuecomment-1295843548), it looks like a decent time to stabilize the `pin!` macro.
### Public API
```rust
// in module `core::pin`
/// API: `fn pin<T>($value: T) -> Pin<&'local mut T>`
pub macro pin($value:expr $(,)?) {
…
}
```
- Tracking issue: #93178
(now all this needs is an FCP by the proper team?)
Allow codegen to unsize `dyn*` to `dyn`
`dyn* Trait` is just another type that implements `Trait`, so we should be able to unsize `&dyn* Trait` into `&dyn Trait` perfectly fine, same for `Box` and other unsizeable types.
Fixes#106488
Prefer non-`[type error]` candidates during selection
Fixes#102130Fixes#106351
r? types
note: Alternatively we could filter out error where-clauses during param-env construction? But we still need to filter out impls with errors during `match_impl`, I think.
Fix invalid syntax and incomplete suggestion in impl Trait parameter type suggestions for E0311
Fixes#105544
The problems: The suggestion given for E0311 has invalid syntax when the synthetic type parameter is used for Trait type in function declaration:
```rust
fn foo(d: impl Sized) -> impl Sized
```
instead of explicitly specified like the following:
```rust
fn foo<T: Sized>(d: T) -> impl Sized
```
In addition to the syntax error, the suggestions given for E0311 are not complete when multiple elided lifetimes are involved in lifetime bounds, not all involved parameters are given the named lifetime in the suggestions. For the following test case:
```
fn foo(d: impl Sized, p: &mut ()) -> impl Sized + '_ {
(d, p)
}
```
a good suggestion should add the lifetime 'a to both d and p, instead of d only:
```
fn foo<'a>(d: impl Sized + 'a, p: &'a mut ()) -> impl Sized + '_ {
(d, p)
}
```
The Solution: Fix the syntax problem in the suggestions when synthetic type parameter is used, and also add lifetimes for all involved parameters.
Recover from where clauses placed before tuple struct bodies
Open to any suggestions regarding the phrasing of the diagnostic.
Fixes#100790.
`@rustbot` label A-diagnostics
r? diagnostics
Note predicate span on `ImplDerivedObligation`
Seems obvious to point out the where-clause that introduces the `ImplDerivedObligation` :)
r? `@estebank`
