Instead of writing each `char` of an escape sequence one by one,
this delegates to `Display`, which uses `write_str` internally
in order to write the whole escape sequence at once.
checked_ilog: improve performance
Addresses #115874.
(This PR replicates the original #115875, which I accidentally closed by deleting my forked repository...)
Implement iterator specialization traits on more adapters
This adds
* `TrustedLen` to `Skip` and `StepBy`
* `TrustedRandomAccess` to `Skip`
* `InPlaceIterable` and `SourceIter` to `Copied` and `Cloned`
The first two might improve performance in the compiler itself since `skip` is used in several places. Constellations that would exercise the last point are probably rare since it would require an owning iterator that has references as Items somewhere in its iterator pipeline.
Improvements for `Skip`:
```
# old
test iter::bench_skip_trusted_random_access ... bench: 8,335 ns/iter (+/- 90)
# new
test iter::bench_skip_trusted_random_access ... bench: 2,753 ns/iter (+/- 27)
```
detects redundant imports that can be eliminated.
for #117772 :
In order to facilitate review and modification, split the checking code and
removing redundant imports code into two PR.
For ranges < usize we determine the number of items
StepBy would yield and then store that in the range.end
instead of the actual end. This significantly
simplifies calculation of the loop induction variable
especially in cases where StepBy::step (an usize)
could overflow the Range's item type
Check requested digit length and the fractional or integral parts of the number. Falls back earlier without trying the Grisu algorithm if the specific condition meets.
Fix#110129
Use `partial_cmp` to implement tuple `lt`/`le`/`ge`/`gt`
In today's implementation, `(A, B)::gt` contains calls to *both* `A::eq` *and* `A::gt`.
That's fine for primitives, but for things like `String`s it's kinda weird -- `(String, usize)::gt` has a call to both `bcmp` and `memcmp` (<https://rust.godbolt.org/z/7jbbPMesf>) because when `bcmp` says the `String`s aren't equal, it turns around and calls `memcmp` to find out which one's bigger.
This PR changes the implementation to instead implement `(A, …, C, Z)::gt` using `A::partial_cmp`, `…::partial_cmp`, `C::partial_cmp`, and `Z::gt`. (And analogously for `lt`, `le`, and `ge`.) That way expensive comparisons don't need to be repeated.
Technically this is an observable change on stable, so I've marked it `needs-fcp` + `T-libs-api` and will
r? rust-lang/libs-api
I'm hoping that this will be non-controversial, however, since it's very similar to the observable changes that were made to the derives (#81384#98655) -- like those, this only changes behaviour if a type overrode behaviour in a way inconsistent with the rules for the various traits involved.
(The first commit here is #108156, adding the codegen test, which I used to make sure this doesn't regress behaviour for primitives.)
Zulip conversation about this change: <https://rust-lang.zulipchat.com/#narrow/stream/219381-t-libs/topic/.60.3E.60.20on.20Tuples/near/328392927>.
Before, it would enter the full expensive check even for normal ascii
characters. Now, it skips the check for the ascii characters in
`32..127`. This range was checked manually from the current behavior.
Avoid using `rand::thread_rng` in the stdlib benchmarks.
This is kind of an anti-pattern because it introduces extra nondeterminism for no real reason. In thread_rng's case this comes both from the random seed and also from the reseeding operations it does, which occasionally does syscalls (which adds additional nondeterminism). The impact of this would be pretty small in most cases, but it's a good practice to avoid (particularly because avoiding it was not hard).
Anyway, several of our benchmarks already did the right thing here anyway, so the change was pretty easy and mostly just applying it more universally. That said, the stdlib benchmarks aren't particularly stable (nor is our benchmark framework particularly great), so arguably this doesn't matter that much in practice.
~~Anyway, this also bumps the `rand` dev-dependency to 0.8, since it had fallen somewhat out of date.~~ Nevermind, too much of a headache.
Some masks where defined as
```rust
const NONASCII_MASK: usize = 0x80808080_80808080u64 as usize;
```
where it was assumed that `usize` is never wider than 64, which is currently true.
To make those constants valid in a hypothetical 128-bit target, these constants have been redefined in an `usize`-width-agnostic way
```rust
const NONASCII_MASK: usize = usize::from_ne_bytes([0x80; size_of::<usize>()]);
```
There are already some cases where Rust anticipates the possibility of supporting 128-bit targets, such as not implementing `From<usize>` for `u64`.
This updates the standard library's documentation to use the new syntax. The
documentation is worthwhile to update as it should be more idiomatic
(particularly for features like this, which are nice for users to get acquainted
with). The general codebase is likely more hassle than benefit to update: it'll
hurt git blame, and generally updates can be done by folks updating the code if
(and when) that makes things more readable with the new format.
A few places in the compiler and library code are updated (mostly just due to
already having been done when this commit was first authored).
Like I previously did for `reverse`, this leaves it to LLVM to pick how to vectorize it, since it can know better the chunk size to use, compared to the "32 bytes always" approach we currently have.
It does still need logic to type-erase where appropriate, though, as while LLVM is now smart enough to vectorize over slices of things like `[u8; 4]`, it fails to do so over slices of `[u8; 3]`.
As a bonus, this also means one no longer gets the spurious `memcpy`(s?) at the end up swapping a slice of `__m256`s: <https://rust.godbolt.org/z/joofr4v8Y>
Speedup int log10 branchless
This is achieved with a branchless bit-twiddling implementation of the case x < 100_000, and using this as building block.
Benchmark on an Intel i7-8700K (Coffee Lake):
```
name old ns/iter new ns/iter diff ns/iter diff % speedup
num::int_log::u8_log10_predictable 165 169 4 2.42% x 0.98
num::int_log::u8_log10_random 438 423 -15 -3.42% x 1.04
num::int_log::u8_log10_random_small 438 423 -15 -3.42% x 1.04
num::int_log::u16_log10_predictable 633 417 -216 -34.12% x 1.52
num::int_log::u16_log10_random 908 471 -437 -48.13% x 1.93
num::int_log::u16_log10_random_small 945 471 -474 -50.16% x 2.01
num::int_log::u32_log10_predictable 1,496 1,340 -156 -10.43% x 1.12
num::int_log::u32_log10_random 1,076 873 -203 -18.87% x 1.23
num::int_log::u32_log10_random_small 1,145 874 -271 -23.67% x 1.31
num::int_log::u64_log10_predictable 4,005 3,171 -834 -20.82% x 1.26
num::int_log::u64_log10_random 1,247 1,021 -226 -18.12% x 1.22
num::int_log::u64_log10_random_small 1,265 921 -344 -27.19% x 1.37
num::int_log::u128_log10_predictable 39,667 39,579 -88 -0.22% x 1.00
num::int_log::u128_log10_random 6,456 6,696 240 3.72% x 0.96
num::int_log::u128_log10_random_small 4,108 3,903 -205 -4.99% x 1.05
```
Benchmark on an M1 Mac Mini:
```
name old ns/iter new ns/iter diff ns/iter diff % speedup
num::int_log::u8_log10_predictable 143 130 -13 -9.09% x 1.10
num::int_log::u8_log10_random 375 325 -50 -13.33% x 1.15
num::int_log::u8_log10_random_small 376 325 -51 -13.56% x 1.16
num::int_log::u16_log10_predictable 500 322 -178 -35.60% x 1.55
num::int_log::u16_log10_random 794 405 -389 -48.99% x 1.96
num::int_log::u16_log10_random_small 1,035 405 -630 -60.87% x 2.56
num::int_log::u32_log10_predictable 1,144 894 -250 -21.85% x 1.28
num::int_log::u32_log10_random 832 786 -46 -5.53% x 1.06
num::int_log::u32_log10_random_small 832 787 -45 -5.41% x 1.06
num::int_log::u64_log10_predictable 2,681 2,057 -624 -23.27% x 1.30
num::int_log::u64_log10_random 1,015 806 -209 -20.59% x 1.26
num::int_log::u64_log10_random_small 1,004 795 -209 -20.82% x 1.26
num::int_log::u128_log10_predictable 56,825 56,526 -299 -0.53% x 1.01
num::int_log::u128_log10_random 9,056 8,861 -195 -2.15% x 1.02
num::int_log::u128_log10_random_small 1,528 1,527 -1 -0.07% x 1.00
```
The 128 bit case remains ridiculously slow because llvm fails to optimize division by a constant 128-bit value to multiplications. This could be worked around but it seems preferable to fix this in llvm.
From u32 up, table lookup (like suggested [here](https://github.com/rust-lang/rust/issues/70887#issuecomment-881099813)) is still faster, but requires a hardware `leading_zeros` to be viable, and might clog up the cache.
