Fix bad span for explicit lifetime suggestions
Fixes#121267
Current explicit lifetime suggestions are not showing correct spans for some lifetimes - e.g. elided lifetime generic parameters;
This should be done correctly regarding elided lifetime kind like the following code
43fdd4916d/compiler/rustc_resolve/src/late/diagnostics.rs (L3015-L3044)
Delegation: fix ICE on duplicated associative items
Currently, functions delegation is only supported for delegation items with early resolved paths e.g. free functions and trait methods. During name resolution, information about function signatures is collected, including the number of parameters and whether there are self arguments. This information is then used when lowering from a delegation item into a regular function(`rustc_ast_lowering/src/delegation.rs`). The signature is usually inherited from path resolution id(`path_id`). However, in the case of trait impls `path_id` and `item_id` may be different:
```rust
trait Trait {
fn foo(&self) -> u32 { 0 }
}
struct S;
mod to_reuse {
use crate::S;
pub fn foo(_: &S) -> u32 { 0 }
}
impl Trait for S {
reuse to_reuse::foo { self }
//~^ The signature should be inherited from item id instead of resolution id
}
```
Let's now consider an example from [issue](https://github.com/rust-lang/rust/issues/119920). Due to duplicated associative elements partial resolution for one of them will not be recorded:
9023f908cf/compiler/rustc_resolve/src/late.rs (L3153-L3162)
Which leads to an incorrect `is_in_trait_impl`
9023f908cf/compiler/rustc_ast_lowering/src/item.rs (L981-L986)
Which leads to an incorrect id for signature inheritance
9023f908cf/compiler/rustc_ast_lowering/src/delegation.rs (L99-L105)
Which lead to an ICE from original issue.
This patch fixes wrong `is_in_trait_impl` calculation.
fixes https://github.com/rust-lang/rust/issues/119920
Use `ControlFlow` in visitors.
Follow up to #121256
This does have a few small behaviour changes in some diagnostic output where the visitor will now find the first match rather than the last match. The change in `find_anon_types.rs` has the only affected test. I don't see this being an issue as the last occurrence isn't any better of a choice than the first.
Make TAITs and ATPITs capture late-bound lifetimes in scope
This generalizes the behavior that RPITs have, where they duplicate their in-scope lifetimes so that they will always *reify* late-bound lifetimes that they capture. This allows TAITs and ATPITs to properly error when they capture in-scope late-bound lifetimes.
r? `@oli-obk` cc `@aliemjay`
Fixes#122093 and therefore https://github.com/rust-lang/rust/pull/120700#issuecomment-1981213868
Add asm goto support to `asm!`
Tracking issue: #119364
This PR implements asm-goto support, using the syntax described in "future possibilities" section of [RFC2873](https://rust-lang.github.io/rfcs/2873-inline-asm.html#asm-goto).
Currently I have only implemented the `label` part, not the `fallthrough` part (i.e. fallthrough is implicit). This doesn't reduce the expressive though, since you can use label-break to get arbitrary control flow or simply set a value and rely on jump threading optimisation to get the desired control flow. I can add that later if deemed necessary.
r? ``@Amanieu``
cc ``@ojeda``
Remove `feed_local_def_id`
best reviewed commit by commit
Basically I returned `TyCtxtFeed` from `create_def` and then preserved that in the local caches
based on https://github.com/rust-lang/rust/pull/121084
r? ````@petrochenkov````
Rework `untranslatable_diagnostic` lint
Currently it only checks calls to functions marked with `#[rustc_lint_diagnostics]`. This PR changes it to check calls to any function with an `impl Into<{D,Subd}iagnosticMessage>` parameter. This greatly improves its coverage and doesn't rely on people remembering to add `#[rustc_lint_diagnostics]`. It also lets us add `#[rustc_lint_diagnostics]` to a number of functions that don't have an `impl Into<{D,Subd}iagnosticMessage>`, such as `Diag::span`.
r? ``@davidtwco``
Currently it only checks calls to functions marked with
`#[rustc_lint_diagnostics]`. This commit changes it to check calls to
any function with an `impl Into<{D,Subd}iagMessage>` parameter. This
greatly improves its coverage and doesn't rely on people remembering to
add `#[rustc_lint_diagnostics]`.
The commit also adds `#[allow(rustc::untranslatable_diagnostic)`]
attributes to places that need it that are caught by the improved lint.
These places that might be easy to convert to translatable diagnostics.
Finally, it also:
- Expands and corrects some comments.
- Does some minor formatting improvements.
- Adds missing `DecorateLint` cases to
`tests/ui-fulldeps/internal-lints/diagnostics.rs`.
Adjust error `yield`/`await` lowering
Adjust the lowering of `yield`/`await` outside of their correct scopes so that we no longer make orpan HIR exprs.
Previously, `yield EXPR` would be lowered directly to `hir::TyKind::Error` (which I'll call `<error>`) which means that `EXPR` was not present in the HIR, but now we lower it to `{ EXPR; <error> }` so that `EXPR` is not orphaned.
Fixes#121096
Existing names for values of this type are `sess`, `parse_sess`,
`parse_session`, and `ps`. `sess` is particularly annoying because
that's also used for `Session` values, which are often co-located, and
it can be difficult to know which type a value named `sess` refers to.
(That annoyance is the main motivation for this change.) `psess` is nice
and short, which is good for a name used this much.
The commit also renames some `parse_sess_created` values as
`psess_created`.
I have a suspicion that quite a few delayed bug paths are impossible to
reach, so I did an experiment.
I converted every `delayed_bug` to a `bug`, ran the full test suite,
then converted back every `bug` that was hit. A surprising number were
never hit.
The next commit will convert some more back, based on human judgment.
Currently many diagnostic modifier methods are available on both
`Diagnostic` and `DiagnosticBuilder`. This commit removes most of them
from `Diagnostic`. To minimize the diff size, it keeps them within
`diagnostic.rs` but changes the surrounding `impl Diagnostic` block to
`impl DiagnosticBuilder`. (I intend to move things around later, to give
a more sensible code layout.)
`Diagnostic` keeps a few methods that it still needs, like `sub`,
`arg`, and `replace_args`.
The `forward!` macro, which defined two additional methods per call
(e.g. `note` and `with_note`), is replaced by the `with_fn!` macro,
which defines one additional method per call (e.g. `with_note`). It's
now also only used when necessary -- not all modifier methods currently
need a `with_*` form. (New ones can be easily added as necessary.)
All this also requires changing `trait AddToDiagnostic` so its methods
take `DiagnosticBuilder` instead of `Diagnostic`, which leads to many
mechanical changes. `SubdiagnosticMessageOp` gains a type parameter `G`.
There are three subdiagnostics -- `DelayedAtWithoutNewline`,
`DelayedAtWithNewline`, and `InvalidFlushedDelayedDiagnosticLevel` --
that are created within the diagnostics machinery and appended to
external diagnostics. These are handled at the `Diagnostic` level, which
means it's now hard to construct them via `derive(Diagnostic)`, so
instead we construct them by hand. This has no effect on what they look
like when printed.
There are lots of new `allow` markers for `untranslatable_diagnostics`
and `diagnostics_outside_of_impl`. This is because
`#[rustc_lint_diagnostics]` annotations were present on the `Diagnostic`
modifier methods, but missing from the `DiagnosticBuilder` modifier
methods. They're now present.
Add an ErrorGuaranteed to ast::TyKind::Err (attempt 2)
This makes it more like `hir::TyKind::Err`, and avoids a `has_errors` assertion in `LoweringContext::lower_ty_direct`.
r? ```@oli-obk```
Add `ErrorGuaranteed` to `ast::LitKind::Err`, `token::LitKind::Err`.
Similar to recent work doing the same for `ExprKind::Err` (#120586) and `TyKind::Err` (#121109).
r? `@oli-obk`
This mostly works well, and eliminates a couple of delayed bugs.
One annoying thing is that we should really also add an
`ErrorGuaranteed` to `proc_macro::bridge::LitKind::Err`. But that's
difficult because `proc_macro` doesn't have access to `ErrorGuaranteed`,
so we have to fake it.
This makes it more like `hir::TyKind::Err`, and avoids a
`span_delayed_bug` call in `LoweringContext::lower_ty_direct`.
It also requires adding `ast::TyKind::Dummy`, now that
`ast::TyKind::Err` can't be used for that purpose in the absence of an
error emission.
There are a couple of cases that aren't as neat as I would have liked,
marked with `FIXME` comments.
For some cases where it's clear that an error has already occurred,
e.g.:
- there's a comment stating exactly that, or
- things like HIR lowering, where we are lowering an error kind
The commit also tweaks some comments around delayed bug sites.
