Shallowly match opaque key in storage
Using a full eq on the key *and* the hidden type means that in cases where we first ambiguously register a `?t` hidden type then constrain that `?t` to be a type that doesn't actually satisfy its bounds, we end up with bogus entries in the opaque type storage. We should commit to the type in the storage if it's registered.
r? lcnr
Check ABI target compatibility for function pointers
Tracking issue: https://github.com/rust-lang/rust/issues/130260
Related tracking issue: #87678
Compatibility of an ABI for a target was previously only performed on function definitions and `extern` blocks. This PR adds it also to function pointers to be consistent.
This might have broken some of the `tests/ui/` depending on the platform, so a try run seems like a good idea.
Also this might break existing code, because we now emit extra errors. Does this require a crater run?
# Example
```rust
// build with: --target=x86_64-unknown-linux-gnu
// These raise E0570
extern "thiscall" fn foo() {}
extern "thiscall" { fn bar() }
// This did not raise any error
fn baz(f: extern "thiscall" fn()) { f() }
```
# Open Questions
* [x] Should this report a future incompatibility warning like #87678 ?
* [ ] Is this the best place to perform the check?
Add suggestion for removing invalid path sep `::` in fn def
Add suggestion for removing invalid path separator `::` in function definition.
for example: `fn invalid_path_separator::<T>() {}`
fixes#130791
Remove deprecation note in the `non_local_definitions` lint
This PR removes the edition deprecation note emitted by the `non_local_definitions` lint.
Specifically this part:
```
= note: this lint may become deny-by-default in the edition 2024 and higher, see the tracking issue <https://github.com/rust-lang/rust/issues/120363>
```
because it [didn't make the cut](https://github.com/rust-lang/rust/issues/120363#issuecomment-2407833300) for the 2024 edition.
`@rustbot` label +L-non_local_definitions
Make unused_parens's suggestion considering expr's attributes.
For the expr with attributes,
like `let _ = (#[inline] || println!("Hello!"));`,
the suggestion's span should contains the attributes, or the suggestion will remove them.
fixes#129833
Support clobber_abi in MSP430 inline assembly
This supports `clobber_abi` which is one of the requirements of stabilization mentioned in #93335.
Refs: Section 3.2 "Register Conventions" in [MSP430 Embedded Application Binary Interface](https://www.ti.com/lit/an/slaa534a/slaa534a.pdf)
cc ``@cr1901``
r? ``@Amanieu``
``@rustbot`` label +O-msp430
intrinsics fmuladdf{32,64}: expose llvm.fmuladd.* semantics
Add intrinsics `fmuladd{f32,f64}`. This computes `(a * b) + c`, to be fused if the code generator determines that (i) the target instruction set has support for a fused operation, and (ii) that the fused operation is more efficient than the equivalent, separate pair of `mul` and `add` instructions.
https://llvm.org/docs/LangRef.html#llvm-fmuladd-intrinsic
The codegen_cranelift uses the `fma` function from libc, which is a correct implementation, but without the desired performance semantic. I think this requires an update to cranelift to expose a suitable instruction in its IR.
I have not tested with codegen_gcc, but it should behave the same way (using `fma` from libc).
---
This topic has been discussed a few times on Zulip and was suggested, for example, by `@workingjubilee` in [Effect of fma disabled](https://rust-lang.zulipchat.com/#narrow/stream/122651-general/topic/Effect.20of.20fma.20disabled/near/274179331).
For the expr with attributes, like `let _ = (#[inline] || println!("Hello!"));`, the suggestion's span should contains the attributes, or the suggestion will remove them.
fixes#129833
RustWrapper: adapt for rename of Intrinsic::getDeclaration
llvm/llvm-project@fa789dffb1 renamed getDeclaration to getOrInsertDeclaration.
`@rustbot` label: +llvm-main
Add intrinsics `fmuladd{f16,f32,f64,f128}`. This computes `(a * b) +
c`, to be fused if the code generator determines that (i) the target
instruction set has support for a fused operation, and (ii) that the
fused operation is more efficient than the equivalent, separate pair
of `mul` and `add` instructions.
https://llvm.org/docs/LangRef.html#llvm-fmuladd-intrinsic
MIRI support is included for f32 and f64.
The codegen_cranelift uses the `fma` function from libc, which is a
correct implementation, but without the desired performance semantic. I
think this requires an update to cranelift to expose a suitable
instruction in its IR.
I have not tested with codegen_gcc, but it should behave the same
way (using `fma` from libc).
Rollup of 6 pull requests
Successful merges:
- #129079 (Create `_imp__` symbols also when doing ThinLTO)
- #131208 (ABI: Pass aggregates by value on AIX)
- #131394 (fix(rustdoc): add space between struct fields and their descriptions)
- #131519 (Use Default visibility for rustc-generated C symbol declarations)
- #131541 (compiletest: Extract auxiliary-crate properties to their own module/struct)
- #131542 (next-solver: remove outdated FIXMEs)
r? `@ghost`
`@rustbot` modify labels: rollup
Use Default visibility for rustc-generated C symbol declarations
Non-default visibilities should only be used for definitions, not declarations, otherwise linking can fail.
This is based on https://github.com/rust-lang/rust/pull/123994.
Issue https://github.com/rust-lang/rust/issues/123427
When I changed `default-hidden-visibility` to `default-visibility` in https://github.com/rust-lang/rust/pull/130005, I updated all places in the code that used `default-hidden-visibility`, replicating the hidden-visibility bug to also happen for protected visibility.
Without this change, trying to build rustc with `-Z default-visibility=protected` fails with a link error.
ABI: Pass aggregates by value on AIX
On AIX we pass aggregates byval. Adds new ABI for AIX for powerpc64.
313ad85dfa/clang/lib/CodeGen/Targets/PPC.cpp (L216)
Fixes the following 2 testcases on AIX:
```
tests/ui/abi/extern/extern-pass-TwoU16s.rs
tests/ui/abi/extern/extern-pass-TwoU8s.rs
```
Create `_imp__` symbols also when doing ThinLTO
When generating a rlib crate on Windows we create `dllimport` / `_imp__` symbols for each global. This effectively makes the rlib contain an import library for itself and allows them to both be dynamically and statically linked. However when doing ThinLTO we do not generate these and thus we end up with missing symbols. Microsoft's `link` can fix these up (and emits warnings), but `lld` seems to currently be unable to.
This PR also does this generation for ThinLTO avoiding those issues with `lld` and also avoids the warnings on `link`.
This is an workaround for https://github.com/rust-lang/rust/issues/81408.
cc `@lqd`
Retire the `unnamed_fields` feature for now
`#![feature(unnamed_fields)]` was implemented in part in #115131 and #115367, however work on that feature has (afaict) stalled and in the mean time there have been some concerns raised (e.g.[^1][^2]) about whether `unnamed_fields` is worthwhile to have in the language, especially in its current desugaring. Because it represents a compiler implementation burden including a new kind of anonymous ADT and additional complication to field selection, and is quite prone to bugs today, I'm choosing to remove the feature.
However, since I'm not one to really write a bunch of words, I'm specifically *not* going to de-RFC this feature. This PR essentially *rolls back* the state of this feature to "RFC accepted but not yet implemented"; however if anyone wants to formally unapprove the RFC from the t-lang side, then please be my guest. I'm just not totally willing to summarize the various language-facing reasons for why this feature is or is not worthwhile, since I'm coming from the compiler side mostly.
Fixes#117942Fixes#121161Fixes#121263Fixes#121299Fixes#121722Fixes#121799Fixes#126969Fixes#131041
Tracking:
* https://github.com/rust-lang/rust/issues/49804
[^1]: https://rust-lang.zulipchat.com/#narrow/stream/213817-t-lang/topic/Unnamed.20struct.2Funion.20fields
[^2]: https://github.com/rust-lang/rust/issues/49804#issuecomment-1972619108
Consider outermost const-anon in `non_local_def` lint
This PR change the logic for finding the parent of the `impl` definition in the `non_local_definitions` lint to consider multiple level of const-anon items, instead of only one currently.
I also took the opportunity to cleanup the related code.
cc ``@traviscross``
Fixes https://github.com/rust-lang/rust/issues/131474
stabilize `ci_rustc_if_unchanged_logic` test
Makes `ci_rustc_if_unchanged_logic` test more stable and re-enables it. Previously, it was expecting CI-rustc to be used all the time when there were no changes, which wasn’t always the case. Purpose of this test is making sure we don't use CI-rustc while there are changes in compiler and/or library, but we don't really need to cover cases where CI-rustc is not enabled.
Second commit was pushed for making a change in the compiler tree, so `ci_rustc_if_unchanged_logic` can be tested properly in merge CI.
Non-default visibilities should only be used for definitions, not
declarations, otherwise linking can fail.
Co-authored-by: Collin Baker <collinbaker@chromium.org>
Avoid redundant sysroot additions to `PATH` when linking
Currently, `rustc` prepends `$HOME/.rustup/toolchains/stable-aarch64-apple-darwin/lib/rustlib/aarch64-apple-darwin/bin` to the `PATH` three times before invoking the linker, which is unnecessary, once should be enough.
Spotted this while trying to get `-Clinker-flavor=gcc` and `-Clinker-flavor=ld` closer together, not really important.
`````@rustbot````` A-linkage
Compiler & its UI tests: Rename remaining occurrences of "object safe" to "dyn compatible"
Follow-up to #130826.
Part of #130852.
1. 1st commit: Fix stupid oversights. Should've been part of #130826.
2. 2nd commit: Rename the unstable feature `object_safe_for_dispatch` to `dyn_compatible_for_dispatch`. Might not be worth the churn, you decide.
3. 3rd commit: Apply the renaming to all UI tests (contents and paths).
Precise capturing in traits
This PR begins to implement `feature(precise_capturing_in_traits)`, which enables using the `impl Trait + use<..>` syntax for RPITITs. It implements this by giving the desugared GATs variance, and representing the uncaptured lifetimes as bivariant, like how opaque captures work.
Right now, I've left out implementing a necessary extension to the `refining_impl_trait` lint, and also I've made it so that all RPITITs always capture the parameters that come from the trait, because I'm not totally yet convinced that it's sound to not capture these args. It's certainly required to capture the type and const parameters from the trait (e.g. Self), or else users could bivariantly relate two RPITIT args that come from different impls, but region parameters don't affect trait selection in the same way, so it *may* be possible to relax this in the future. Let's stay conservative for now, though.
I'm not totally sure what tests could be added on top of the ones I already added, since we really don't need to exercise the `precise_capturing` feature but simply what makes it special for RPITITs.
r? types
Tracking issue:
* #130044
rustc_target: Add sme-b16b16 as an explicit aarch64 target feature
LLVM 20 split out what used to be called b16b16 and correspond to aarch64
FEAT_SVE_B16B16 into sve-b16b16 and sme-b16b16.
Add sme-b16b16 as an explicit feature and update the codegen accordingly.
Resolves https://github.com/rust-lang/rust/pull/129894.
codegen_ssa: consolidate tied target checks
Fixes#105110.
Fixes#105111.
`rustc_codegen_llvm` and `rustc_codegen_gcc` duplicated logic for checking if tied target features were partially enabled. This PR consolidates these checks into `rustc_codegen_ssa` in the `codegen_fn_attrs` query, which also is run pre-monomorphisation for each function, which ensures that this check is run for unused functions, as would be expected.
Also adds a test confirming that enabling one tied feature doesn't imply another - the appropriate error for this was already being emitted. I did a bisect and narrowed it down to two patches it was likely to be - something in #128796, probably #128221 or #128679.
Introduce SolverRelating type relation to the new solver
Redux of #128744.
Splits out relate for the new solver so that implementors don't need to implement it themselves.
r? lcnr
LLVM and Cranelift disagree about how to return values that don't fit
in the registers designated for return values. LLVM will force the
entire return value to be passed by return area pointer, while
Cranelift will look at each IR level return value independently and
decide to pass it in a register or not, which would result in the
return value being passed partially in registers and partially through
a return area pointer.
While Cranelift may need to be fixed as the LLVM behavior is generally
more correct with respect to the surface language, forcing this
behavior in rustc itself makes it easier for other backends to conform
to the Rust ABI and for the C ABI rustc already handles this behavior
anyway.
In addition LLVM's decision to pass the return value in registers or
using a return area pointer depends on how exactly the return type is
lowered to an LLVM IR type. For example `Option<u128>` can be lowered
as `{ i128, i128 }` in which case the x86_64 backend would use a return
area pointer, or it could be passed as `{ i32, i128 }` in which case
the x86_64 backend would pass it in registers by taking advantage of an
LLVM ABI extension that allows using 3 registers for the x86_64 sysv
call conv rather than the officially specified 2 registers.
This adjustment is only necessary for the Rust ABI as for other ABI's
the calling convention implementations in rustc_target already ensure
any return value which doesn't fit in the available amount of return
registers is passed in the right way for the current target.
Apple: Avoid redundant `-Wl,-dylib` flag when linking
Seems to have been introduced all the way back in e338a4154b, but should be redundant, `-dynamiclib` should already make `cc` set `-dylib` when linking.
Spotted this while trying to get `-Clinker-flavor=gcc` and `-Clinker-flavor=ld` closer together, not that important to fix.
`@rustbot` label O-apple
fix/update teach_note from 'escaping mutable ref/ptr' const-check
The old note was quite confusing since it talked about statics, but the message is also shown for consts. So let's reword to something that is true for both of them.
Fix a few relative paths in rustc doc
## Changes
- Don't inline the doc for re-exporting some structs that have relative paths in doc.
## Context
See #124028.
- Most of the relative links in rustdoc are there because of circular import (so syntax like `[MyType]: rustc_foo::bar` is difficult to achieve when we cannot import `rustc_xxx` due to circular import)
- Here, I disable new links for re-exports. I think it's fine for re-exported items in `hir::*`.
- There is a few more relative links in other `rustc` crates, however they are not addressed in this PR, as they are not re-exported and/so the relative paths are working.
Closes#124028.
r? `@fmease`
Let me know if I miss anything or there's any other way to address this issue.
LLVM 20 split out what used to be called b16b16 and correspond to aarch64
FEAT_SVE_B16B16 into sve-b16b16 and sme-b16b16.
Add sme-b16b16 as an explicit feature and update the codegen accordingly.
Fix needless_lifetimes in rustc_serialize
Hi,
This PR fixes the following clipy warnings:
```
warning: the following explicit lifetimes could be elided: 'a
--> compiler/rustc_serialize/src/serialize.rs:328:6
|
328 | impl<'a, S: Encoder, T: Encodable<S>> Encodable<S> for Cow<'a, [T]>
| ^^ ^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes
= note: `#[warn(clippy::needless_lifetimes)]` on by default
help: elide the lifetimes
|
328 - impl<'a, S: Encoder, T: Encodable<S>> Encodable<S> for Cow<'a, [T]>
328 + impl<S: Encoder, T: Encodable<S>> Encodable<S> for Cow<'_, [T]>
|
warning: the following explicit lifetimes could be elided: 'a
--> compiler/rustc_serialize/src/serialize.rs:348:6
|
348 | impl<'a, S: Encoder> Encodable<S> for Cow<'a, str> {
| ^^ ^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes
help: elide the lifetimes
|
348 - impl<'a, S: Encoder> Encodable<S> for Cow<'a, str> {
348 + impl<S: Encoder> Encodable<S> for Cow<'_, str> {
|
warning: the following explicit lifetimes could be elided: 'a
--> compiler/rustc_serialize/src/serialize.rs:355:6
|
355 | impl<'a, D: Decoder> Decodable<D> for Cow<'a, str> {
| ^^ ^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes
help: elide the lifetimes
|
355 - impl<'a, D: Decoder> Decodable<D> for Cow<'a, str> {
355 + impl<D: Decoder> Decodable<D> for Cow<'_, str> {
```
Best regards,
Michal
compiler: Stop reexporting enum-globs from `rustc_target::abi`
Three enums had **all** their variants glob-exported into a distressingly large amount of the tree. Cease to do that, and also cease to glob import the contents of the module that contained them. Redirect relevant imports to their actual source, the `rustc_abi` crate.
No functional changes.
Dont ICE when encountering post-mono layout cycle error
It's possible to encounter post-mono layout cycle errors in `fn_abi_of_instance`. Don't ICE in those cases.
This was originally discovered in an async fn, but that's not the only way to encounter such an error (which the other test I added should demonstrate).
Error messsages suck, but this fix is purely about suppressing the ICE.
Fixes#131409
[Coverage][MCDC] Adapt mcdc to llvm 19
Related issue: #126672
Also finish task 4 at #124144
[llvm #82448](https://github.com/llvm/llvm-project/pull/82448) has introduced some break changes into mcdc, causing incompatibility between llvm 18 and 19. This draft adapts to that change and gives up supporting for llvm-18.
`Deref`/`DerefMut` can be useful, but they can also obfuscate. I don't
think they're worth it for `RegionConstraintCollector`. They're also not
present on the similar types `OpaqueTypeTable` and `TypeVariableTable`.
`LeakCheck` can own `mini_graph` and `rcc` instead of holding references
to them. This requires inlining `assign_scc_value` to avoid a borrowck
error, but that's fine because it has a single call site.
It's a weird method, and used weirdly:
- It's on `RegionConstraintCollector` but operates on
`RegionConstraintStorage`. So at both call sites we create a temporary
`RegionConstraintCollector`, using `with_log`, to call it.
- It `take`s just two of the six fields in `RegionConstraintStorage`.
At one of the two call sites we unnecessarily clone the entire
`RegionConstraintStorage` just to take those two fields.
This commit just inlines and removes it. We no longer need to `take` the
two fields, we can just use them directly.
`OutlivesEnvironment::new` can call `OutlivesEnvironment::with_bounds`
with an empty `extra_bounds`. And once that's done,
`OutlivesEnvironmentBuilder` has a single use and can be inlined and
removed into `OutlivesEnvironment::with_bounds`.
Fix `target_vendor` in non-IDF Xtensa ESP32 targets
`rustc`'s Xtensa ESP32 targets are the following:
- `xtensa-esp32-none-elf`
- `xtensa-esp32-espidf`
- `xtensa-esp32s2-none-elf`
- `xtensa-esp32s2-espidf`
- `xtensa-esp32s3-none-elf`
- `xtensa-esp32s3-espidf`
The ESP-IDF targets already set `target_vendor="espressif"`, however, the ESP32 is, from my understanding, produced by Espressif regardless of whether using the IDF or not, so we should set the target vendor there as well?
Add missing module flags for `-Zfunction-return=thunk-extern`
This fixes a bug in the `-Zfunction-return=thunk-extern` flag. The flag needs to be passed onto LLVM to ensure that functions such as `asan.module_ctor` and `asan.module_dtor` that are created internally in LLVM have the mitigation applied to them.
This was originally discovered [in the Linux kernel](https://lore.kernel.org/all/CANiq72myZL4_poCMuNFevtpYYc0V0embjSuKb7y=C+m3vVA_8g@mail.gmail.com/).
Original flag PR: #116892
PR for similar issue: #129373
Tracking issue: #116853
cc ``@ojeda``
r? ``@wesleywiser``
Remove `CombineFields`
This conflicts with #131263, but if this one lands first then perhaps #131263 could then go ahead and remove all the branching on solver in `TypeRelating`. We could perhaps then rename `TypeRelating` to `OldSolverRelating` or something, idk.
r? lcnr
Fix used_underscore_binding in rustc_serialize
Hi,
This PR fixes the following clippy warnings in rustc_serialize
```
warning: used underscore-prefixed binding
--> compiler/rustc_serialize/src/opaque.rs:443:27
|
443 | debug_assert_eq!((_end_pos - _start_pos), IntEncodedWithFixedSize::ENCODED_SIZE);
| ^^^^^^^^
|
note: binding is defined here
--> compiler/rustc_serialize/src/opaque.rs:442:13
|
442 | let _end_pos = e.position();
| ^^^^^^^^
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#used_underscore_binding
= note: requested on the command line with `-W clippy::used-underscore-binding`
warning: used underscore-prefixed binding
--> compiler/rustc_serialize/src/opaque.rs:443:38
|
443 | debug_assert_eq!((_end_pos - _start_pos), IntEncodedWithFixedSize::ENCODED_SIZE);
| ^^^^^^^^^^
|
note: binding is defined here
--> compiler/rustc_serialize/src/opaque.rs:440:13
|
440 | let _start_pos = e.position();
| ^^^^^^^^^^
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#used_underscore_binding
```
Best regards,
Michal
Couple of changes to make it easier to compile rustc for wasm
This is a subset of the patches I have on my rust fork to compile rustc for wasm32-wasip1.
Don't allow the `#[pointee]` attribute where it doesn't belong
Error if the `#[pointee]` attribute is applied to anything but generic type parameters.
Closes#128485
Related to #123430
coverage: Multiple small tweaks to counter creation
I've been experimenting with some larger changes to how coverage counters are assigned to parts of the control-flow graph, and while none of that is ready yet, along the way I've repeatedly found myself wanting these smaller tweaks as a base.
There are no changes to compiler output.
Don't use Immediate::offset to transmute pointers to integers
This applies the relatively new `assert_matches_abi` check in the `offset` operation on immediates, which makes sure that if offsets are used to alter the layout (which is possible because the field layout is arbitrarily picked by the caller), this is not done in a way that breaks the invariant of the `Immediate` type.
This leads to ICEs in a GVN mir-opt test, so the second commit fixes GVN.
Fixes https://github.com/rust-lang/rust/issues/131064.
`FixupError` is isomorphic with `TyOrConstInferVar`, so this commit
changes it to just be a wrapper around `TyOrConstInferVar`.
Also, move the `Display` impl for `FixupError` next to `FixupError`.
Three of the modules don't need to be `pub`, and then
`warn(unreachable_pub)` identifies a bunch more things that also
shouldn't be `pub`, plus a couple of things that are unused.
add `naked_asm!` macro for use in `#[naked]` functions
tracking issue: https://github.com/rust-lang/rust/issues/90957
Adds the `core::arch::naked_asm` macro, to be used in `#[naked]` functions, but providing better error messages and a place to explain the restrictions on assembly in naked functions.
This PR does not yet require that the `naked_asm!` macro is used inside of `#[naked]` functions:
- the `asm!` macro can still be used in `#[naked]` functions currently, with the same restrictions and error messages as before.
- the `naked_asm!` macro can be used outside of `#[naked]` functions. It has not yet been decided whether that should be allowed long-term.
In this PR, the parsing code of `naked_asm!` now enforces the restrictions on assembly in naked functions, with the exception of checking that the `noreturn` option is specified. It also has not currently been decided if `noreturn` should be implicit or not.
This PR looks large because it touches a bunch of tests. The code changes are mostly straightforward I think: we now have 3 flavors of assembly macro, and that information must be propagated through the parsing code and error messages.
cc `@Lokathor`
r? `@Amanieu`
- fix for divergence
- fix error message
- fix another cranelift test
- fix some cranelift things
- don't set the NORETURN option for naked asm
- fix use of naked_asm! in doc comment
- fix use of naked_asm! in run-make test
- use `span_bug` in unreachable branch
Make deprecated_cfg_attr_crate_type_name a hard error
Turns the forward compatibility lint added by #83744 into a hard error, so now, while the `#![crate_name]` and `#![crate_type]` attributes are still allowed in raw form, they are now forbidden to be nested inside a `#![cfg_attr()]` attribute.
The following will now be an error:
```Rust
#![cfg_attr(foo, crate_name = "foobar")]
#![cfg_attr(foo, crate_type = "bin")]
```
This code will continue working and is not deprecated:
```Rust
#![crate_name = "foobar"]
#![crate_type = "lib"]
```
The reasoning for this is explained in #83744: it allows us to not have to cfg-expand in order to determine the crate's type and name.
As of filing the PR, exactly two years have passed since #99784 has been merged, which has turned the lint's default warning level into an error, so there has been ample time to move off the now-forbidden syntax.
cc #91632 - tracking issue for the lint
This makes it possible for other parts of counter-assignment to check whether a
node is guaranteed to end up with some kind of counter.
Switching from `impl Fn` to a concrete `&BitSet` just avoids the hassle of
trying to store a closure in a struct field, and currently there's no
foreseeable need for this information to not be a bitset.
On function and method calls in patterns, link to the book
```
error: expected a pattern, found an expression
--> f889.rs:3:13
|
3 | let (x, y.drop()) = (1, 2);
| ^^^^^^^^ not a pattern
|
= note: arbitrary expressions are not allowed in patterns: <https://doc.rust-lang.org/book/ch18-00-patterns.html>
error[E0532]: expected a pattern, found a function call
--> f889.rs:2:13
|
2 | let (x, drop(y)) = (1, 2);
| ^^^^ not a tuple struct or tuple variant
|
= note: function calls are not allowed in patterns: <https://doc.rust-lang.org/book/ch18-00-patterns.html>
```
Fix#97200.
Do not consider match/let/ref of place that evaluates to `!` to diverge, disallow coercions from them too
Fixes#117288.
This PR implements a heuristic which disables two things that are currently being performed on the HIR when we have **expressions that involve place-like expressions that point to `!`**. Specifically, it will (in certain cases explained below):
### (1.) Disable the `NeverToAny` coercion we implicitly insert for `!`.
Which fixes this inadvertent, sneaky unsoundness:
```
unsafe {
let x: *const ! = &0 as *const u8 as *const !;
let _: () = *x;
}
```
which is UB because currently rust emits an *implicit* NeverToAny coercion even though we really shouldn't be, since there's no read of the value pointed by `x`.
### (2.) Disable the logic which considers expression which evaluate to `!` to diverge, which affects the type returned by the containing block.
Which fixes this unsoundness:
```
fn make_up_a_value<T>() -> T {
unsafe {
let x: *const ! = &0 as *const u8 as *const !;
let _ = *x;
}
}
```
We disable these two operations **if** the expression is a place-like expression (locals, statics, field projections, index operations, and deref operations), and if the parent expression is either:
(1.) the LHS of an assignment
(2.) AddrOf
(3.) A match or let **unless** all of the *patterns consitute a read*, which is explained below:
And finally, a pattern currently is considered to constitute a read **unless** it is a wildcard, or an OR pattern. An OR pattern is considered to constitute a read if all of its subpatterns constitute a read, to remain as conservative as possible in cases like `_ | subpat` or `subpat | _`.
All other patterns are considered currently to constitute a read. Specifically, because `NeverToAny` is a coercion performed on a *value* and not a *place*, `Struct { .. }` on a `!` type must be a coercion currently, and we currently rely on this behavior to allow us to perform coercions like `let _: i32 = x;` where `x: !`.
This is already considered UB by [miri](https://play.rust-lang.org/?version=nightly&mode=debug&edition=2021&gist=daf3a2246433fe43fdc07d1389c276c9), but also means it does not affect the preexisting UB in this case:
```
let Struct { .. } = *never_ptr;
```
Even though it's likely up for debate since we're not actually reading any data out of the struct, it almost certainly causes inference changes which I do *NOT* want to fix in this PR.
```
error: expected a pattern, found an expression
--> f889.rs:3:13
|
3 | let (x, y.drop()) = (1, 2); //~ ERROR
| ^^^^^^^^ not a pattern
|
= note: arbitrary expressions are not allowed in patterns: <https://doc.rust-lang.org/book/ch18-00-patterns.html>
error[E0532]: expected a pattern, found a function call
--> f889.rs:2:13
|
2 | let (x, drop(y)) = (1, 2); //~ ERROR
| ^^^^ not a tuple struct or tuple variant
|
= note: function calls are not allowed in patterns: <https://doc.rust-lang.org/book/ch18-00-patterns.html>
```
Fix#97200.
Handle `rustc_interface` cases of `rustc::potential_query_instability` lint
This PR removes `#![allow(rustc::potential_query_instability)]` occurrences from [`compiler/rustc_interface/`](https://github.com/rust-lang/rust/blob/master/compiler/rustc_interface/) <s>and converts `FxHash{Map,Set}` types into `FxIndex{Map,Set}` to suppress lint errors</s> (was not necessary for this PR).
A somewhat tracking issue: https://github.com/rust-lang/rust/issues/84447
r? `@compiler-errors`
Make opaque types regular HIR nodes
Having opaque types as HIR owner introduces all sorts of complications. This PR proposes to make them regular HIR nodes instead.
I haven't gone through all the test changes yet, so there may be a few surprises.
Many thanks to `@camelid` for the first draft.
Fixes https://github.com/rust-lang/rust/issues/129023Fixes#129099Fixes#125843Fixes#119716Fixes#121422
Account for `impl Trait {` when `impl Trait for Type {` was intended
On editions where bare traits are never allowed, detect if the user has written `impl Trait` with no type, silence any dyn-compatibility errors, and provide a structured suggestion for the potentially missing type:
```
error[E0782]: trait objects must include the `dyn` keyword
--> $DIR/missing-for-type-in-impl.rs:8:6
|
LL | impl Foo<i64> {
| ^^^^^^^^
|
help: add `dyn` keyword before this trait
|
LL | impl dyn Foo<i64> {
| +++
help: you might have intended to implement this trait for a given type
|
LL | impl Foo<i64> for /* Type */ {
| ++++++++++++++
```
CC #131051.
Fix needless_lifetimes in stable_mir
Hi,
This PR fixes the following clippy warning in stable_mir
```
warning: the following explicit lifetimes could be elided: 'a
--> compiler/stable_mir/src/mir/visit.rs:79:30
|
79 | fn visit_projection_elem<'a>(
| ^^
80 | &mut self,
81 | place_ref: PlaceRef<'a>,
| ^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes
= note: `#[warn(clippy::needless_lifetimes)]` on by default
help: elide the lifetimes
|
79 ~ fn visit_projection_elem(
80 | &mut self,
81 ~ place_ref: PlaceRef<'_>,
|
```
Best regards,
Michal
Add support for reborrowing pinned method receivers
This builds on #130526 to add pinned reborrowing for method receivers. This enables the folllowing examples to work:
```rust
#![feature(pin_ergonomics)]
#![allow(incomplete_features)]
use std::pin::Pin;
pub struct Foo;
impl Foo {
fn foo(self: Pin<&mut Self>) {
}
fn baz(self: Pin<&Self>) {
}
}
pub fn bar(x: Pin<&mut Foo>) {
x.foo();
x.foo();
x.baz(); // Pin<&mut Foo> is downgraded to Pin<&Foo>
}
pub fn baaz(x: Pin<&Foo>) {
x.baz();
x.baz();
}
```
This PR includes the original one, which is currently in the commit queue, but the only code changes are in the latest commit (d3c53aaa5c6fcb1018c58d229bc5d92202fa6880).
#130494
r? `@compiler-errors`
Check elaborated projections from dyn don't mention unconstrained late bound lifetimes
Check that the projections that are *not* explicitly written but which we deduce from elaborating the principal of a `dyn` *also* do not reference unconstrained late-bound lifetimes, just like the ones that the user writes by hand.
That is to say, given:
```
trait Foo<T>: Bar<Assoc = T> {}
trait Bar {
type Assoc;
}
```
The type `dyn for<'a> Foo<&'a T>` (basically) elaborates to `dyn for<'a> Foo<&'a T> + for<'a> Bar<Assoc = &'a T>`[^1]. However, the `Bar` projection predicate is not well-formed, since `'a` must show up in the trait's arguments to be referenced in the term of a projection. We must error in this situation[^well], or else `dyn for<'a> Foo<&'a T>` is unsound.
We already detect this for user-written projections during HIR->rustc_middle conversion, so this largely replicates that logic using the helper functions that were already conveniently defined.
---
I'm cratering this first to see the fallout; if it's minimal or zero, then let's land it as-is. If not, the way that this is implemented is very conducive to an FCW.
---
Fixes#130347
[^1]: We don't actually elaborate it like that in rustc; we only keep the principal trait ref `Foo<&'a T>` and the projection part of `Bar<Assoc = ...>`, but it's useful to be a bit verbose here for the purpose of explaining the issue.
[^well]: Well, we could also make `dyn for<'a> Foo<&'a T>` *not* implement `for<'a> Bar<Assoc = &'a T>`, but this is inconsistent with the case where the user writes `Assoc = ...` in the type itself, and it overly complicates the implementation of trait objects' built-in impls.
On editions where bare traits are never allowed, detect if the user has
written `impl Trait` with no type, silence any dyn-compatibility errors,
and provide a structured suggestion for the potentially missing type:
```
error[E0782]: trait objects must include the `dyn` keyword
--> $DIR/missing-for-type-in-impl.rs:8:6
|
LL | impl Foo<i64> {
| ^^^^^^^^
|
help: add `dyn` keyword before this trait
|
LL | impl dyn Foo<i64> {
| +++
help: you might have intended to implement this trait for a given type
|
LL | impl Foo<i64> for /* Type */ {
| ++++++++++++++
```
Fix `target_abi` in `sparc-unknown-none-elf`
This was previously set to `target_abi = "elf"`, but `elf` is not used elsewhere as a target ABI (even though there's many targets that have it in their name), so I've removed it.
CC target maintainer ``@jonathanpallant,`` what do you think about this?
``@rustbot`` label O-SPARC
Fix `target_env` in `avr-unknown-gnu-atmega328`
The target name itself contains GNU, we should probably reflect that as `target_env = "gnu"` as well? Or from my reading of https://github.com/rust-lang/rust/pull/74941#issuecomment-712219034, perhaps not, but then that should probably be documented somewhere?
There's no listed target maintainer, but the target was introduced in https://github.com/rust-lang/rust/pull/74941, so I'll ping the author of that: `@dylanmckay`
Relatedly, I wonder _why_ the recommendation is to [create separate target triples for each AVR](https://github.com/Rahix/avr-hal/tree/main/avr-specs), when `-Ctarget-cpu=...` would suffice, perhaps you could also elaborate on that? Was it just because `-Ctarget-cpu=...` didn't exist back then? If so, now that it does, should we now change the target back to e.g. `avr-unknown-none-gnu`, and require the user to set `-Ctarget-cpu=...` instead?
Increase Stack Size for AIX
On AIX, there are limited support for tail call optimizations, so we need to set a larger stack size value.
Fixes the following tests on AIX:
```
[ui] tests/ui/associated-consts/issue-93775.rs
[ui] tests/ui/closures/deeply-nested_closures.rs
[ui] tests/ui/issues/issue-74564-if-expr-stack-overflow.rs
[ui] tests/ui/parser/survive-peano-lesson-queue.rs
```
Stabilize the `map`/`value` methods on `ControlFlow`
And fix the stability attribute on the `pub use` in `core::ops`.
libs-api in https://github.com/rust-lang/rust/issues/75744#issuecomment-2231214910 seemed reasonably happy with naming for these, so let's try for an FCP.
Summary:
```rust
impl<B, C> ControlFlow<B, C> {
pub fn break_value(self) -> Option<B>;
pub fn map_break<T>(self, f: impl FnOnce(B) -> T) -> ControlFlow<T, C>;
pub fn continue_value(self) -> Option<C>;
pub fn map_continue<T>(self, f: impl FnOnce(C) -> T) -> ControlFlow<B, T>;
}
```
Resolves#75744
``@rustbot`` label +needs-fcp +t-libs-api -t-libs
---
Aside, in case it keeps someone else from going down the same dead end: I looked at the `{break,continue}_value` methods and tried to make them `const` as part of this, but that's disallowed because of not having `const Drop`, so put it back to not even unstably-const.
Add x86_64-unknown-trusty as tier 3 target
This PR adds a third target for the Trusty platform, `x86_64-unknown-trusty`.
Please let me know if an MCP is required. https://github.com/rust-lang/compiler-team/issues/582 was made when adding the first two targets, I can make another one for the new target as well if needed.
# Target Tier Policy Acknowledgements
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
- Nicole LeGare (```@randomPoison)```
- Andrei Homescu (```@ahomescu)```
- Chris Wailes (chriswailes@google.com)
- As a fallback trusty-dev-team@google.com can be contacted
Note that this does not reflect the maintainers currently listed in [`trusty.md`](c52c23b6f4/src/doc/rustc/src/platform-support/trusty.md). #130452 is currently open to update the list of maintainers in the documentation.
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
The new target `x86_64-unknown-trusty` follows the existing naming convention for similar targets.
> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
👍
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
There are no known legal issues or license incompatibilities.
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
👍
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This PR only adds the target. `std` support is being worked on and will be added in a future PR.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
👍
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via ```@)``` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
👍
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
👍
> Tier 3 targets must be able to produce assembly using at least one of rustc's supported backends from any host target. (Having support in a fork of the backend is not sufficient, it must be upstream.)
👍
This was previously set to `target_abi = "elf"`, but `elf` is not used
elsewhere as a target ABI (even though there's many targets that have it
in their name).
Implement RFC3695 Allow boolean literals as cfg predicates
This PR implements https://github.com/rust-lang/rfcs/pull/3695: allow boolean literals as cfg predicates, i.e. `cfg(true)` and `cfg(false)`.
r? `@nnethercote` *(or anyone with parser knowledge)*
cc `@clubby789`
The `regioncx` and `borrow_set` fields can be references instead of
`Rc`. They use the existing `'a` lifetime. This avoids some heap
allocations and is a bit simpler.
Disable jump threading `UnOp::Not` for non-bool
Fix#131195, where jumpthreading was optimizing `!a == b` into `a != b` for non-bool, where this is definitely not true.
Most of the code in these two modules is duplicated in the other module.
This commit eliminates the duplication by replacing them with a new
module `lattice_op`. The new `LatticeOpKind` enum is used to distinguish
between glb and lub in the few places where the behaviour differs.
