Merge CrateDisambiguator into StableCrateId
This simplifies the code and potentially improves performance by reducing the amount of hashed data.
Fixes https://github.com/rust-lang/rust/issues/85795
Error code checker improvement
Just realized that some error codes shouldn't be ignored anymore. So I updated the script to ensure that if an error code is tested and ignored, it will trigger an error.
Revert "Auto merge of #83770 - the8472:tra-extend, r=Mark-Simulacrum"
Due to a performance regression that didn't show up in the original perf run
this reverts commit 9111b8ae97 (#83770), reversing
changes made to 9a700d2947.
Since since is expected to have the inverse impact it should probably be rollup=never.
r? `@Mark-Simulacrum`
Make `Step` trait safe to implement
This PR makes a few modifications to the `Step` trait that I believe better position it for stabilization in the short term. In particular,
1. `unsafe trait TrustedStep` is introduced, indicating that the implementation of `Step` for a given type upholds all stated invariants (which have remained unchanged). This is gated behind a new `trusted_step` feature, as stabilization is realistically blocked on min_specialization.
2. The `Step` trait is internally specialized on the `TrustedStep` trait, which avoids a serious performance regression.
3. `TrustedLen` is implemented for `T: TrustedStep` as the latter's invariants subsume the former's.
4. The `Step` trait is no longer `unsafe`, as the invariants must not be relied upon by unsafe code (unless the type implements `TrustedStep`).
5. `TrustedStep` is implemented for all types that implement `Step` in the standard library and compiler.
6. The `step_trait_ext` feature is merged into the `step_trait` feature. I was unable to find any reasoning for the features being split; the `_unchecked` methods need not necessarily be stabilized at the same time, but I think it is useful to have them under the same feature flag.
All existing implementations of `Step` will be broken, as it is not possible to `unsafe impl` a safe trait. Given this trait only exists on nightly, I feel this breakage is acceptable. The blanket `impl<T: Step> TrustedLen for T` will likely cause some minor breakage, but this should be covered by the equivalent impl for `TrustedStep`.
Hopefully these changes are sufficient to place `Step` in decent position for stabilization, which would allow user-defined types to be used with `a..b` syntax.
Optimize proc macro bridge
This optimizes the proc macro bridge code for a win of 0.7% instruction counts on the diesel-check benchmark (non-incr, full). These wins are small, but hopefully not limited to just the diesel benchmark; the code is also not seriously impacted by the changes here.
Don't panic when failing to initialize incremental directory.
This removes a panic when rustc fails to initialize the incremental directory. This can commonly happen on various filesystems that don't support locking (often various network filesystems). Panics can be confusing and scary, and there are already plenty of issues reporting this.
This has been panicking since 1.22 due to I think #44502 which was a major rework of how things work. Previously, things were simpler and the [`load_dep_graph`](https://github.com/rust-lang/rust/blob/1.21.0/src/librustc_incremental/persist/load.rs#L43-L65) function would emit an error and then continue on without panicking. With 1.22, [`load_dep_graph`](https://github.com/rust-lang/rust/blob/1.22.0/src/librustc_incremental/persist/load.rs#L44) was changed so that it assumes it can load the data without errors. Today, the problem is that it calls [`prepare_session_directory`](fbf1b1a719/compiler/rustc_interface/src/passes.rs (L175-L179)) and then immediately calls `garbage_collect_session_directories` which will panic since the session is `IncrCompSession::NotInitialized`.
The solution here is to have `prepare_session_directory` return an error that must be handled so that compilation stops if it fails.
Some other options:
* Ignore directory lock failures.
* Print a warning on directory lock failure, but otherwise continue with incremental enabled.
* Print a warning on directory lock failure, and disable incremental.
* Provide a different locking mechanism.
Cargo ignores lock errors if locking is not supported, so that would be a precedent for the first option. These options would require quite a bit more changes, but I'm happy to entertain any of them, as I think they all have valid justifications.
There is more discussion on the many issues where this is reported: #49773, #59224, #66513, #76251. I'm not sure if this can be considered closing any of those, though, since I think there is some value in discussing if there is a way to avoid the error altogether. But I think it would make sense to at least close all but one to consolidate them.
copy_from_slice generally falls back to memcpy/memmove, which is much more expensive
than we need to write a single element in.
This saves 0.26% instructions on the diesel benchmark.
A bit more polish on const eval errors
This PR adds a bit more polish to the const eval errors:
- a slight improvement to the PME messages from #85633: I mentioned there that the erroneous item's paths were dependent on the environment, and could be displayed fully qualified or not. This can obscure the items when they come from a dependency. This PR uses the pretty-printing code ensuring the items' paths are not trimmed.
- whenever there are generics involved in an item where const evaluation errors out, the error message now displays the instance and its const arguments, so that we can see which instantiated item and compile-time values lead to the error.
So we get this slight improvement for our beloved `stdarch` example, on nightly:
```
error[E0080]: evaluation of constant value failed
--> ./stdarch/crates/core_arch/src/macros.rs:8:9
|
8 | assert!(IMM >= MIN && IMM <= MAX, "IMM value not in expected range");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the evaluated program panicked at 'IMM value not in expected range', /rustc/9111b8ae9793f18179a1336417618fc07a9cac85/library/core/src/../../stdarch/crates/core_arch/src/macros.rs:8:9
|
```
to this PR's:
```
error[E0080]: evaluation of `core::core_arch::macros::ValidateConstImm::<51_i32, 0_i32, 15_i32>::VALID` failed
--> ./stdarch/crates/core_arch/src/macros.rs:8:9
|
8 | assert!(IMM >= MIN && IMM <= MAX, "IMM value not in expected range");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the evaluated program panicked at 'IMM value not in expected range', ./stdarch/crates/core_arch/src/macros.rs:8:9
|
```
with this PR.
Of course this is an idea from Oli, so maybe r? `@oli-obk` if they have the time.
const-eval: disallow unwinding across functions that `!fn_can_unwind()`
Following https://github.com/rust-lang/miri/pull/1776#discussion_r633074343, so r? `@RalfJung`
This PR turns `unwind` in `StackPopCleanup::Goto` into a new enum `StackPopUnwind`, with a `NotAllowed` variant to indicate that unwinding is not allowed. This variant is chosen based on `rustc_middle::ty::layout::fn_can_unwind()` in `eval_fn_call()` when pushing the frame. A check is added in `unwind_to_block()` to report UB if unwinding happens across a `StackPopUnwind::NotAllowed` frame.
Tested with Miri `HEAD` with [minor changes](https://github.com/rust-lang/miri/compare/HEAD..9cf3c7f0d86325a586fbcbf2acdc9232b861f1d8) and the rust-lang/miri#1776 branch with [these changes](d866c1c52f..626638fbfe).
Add #[track_caller] to panic_any
Report the panic location from the user code.
```rust
use std::panic;
use std::panic::panic_any;
fn main() {
panic::set_hook(Box::new(|panic_info| {
if let Some(location) = panic_info.location() {
println!(
"panic occurred in file '{}' at line {}",
location.file(),
location.line(),
);
} else {
println!("panic occurred but can't get location information...");
}
}));
panic_any(42);
}
````
Before:
`panic occurred in file '/rustc/ff2c947c00f867b9f012e28ba88cecfbe556f904/library/std/src/panic.rs' at line 59`
After:
`panic occurred in file 'src/main.rs' at line 17`
Fix incorrect suggestions for E0605
Fixes#84598. Here is a simplified version of the problem presented in issue #84598:
```Rust
#![allow(unused_variables)]
#![allow(dead_code)]
trait T { fn t(&self) -> i32; }
unsafe fn foo(t: *mut dyn T) {
(t as &dyn T).t();
}
fn main() {}
```
The current output is:
```
error[E0605]: non-primitive cast: `*mut (dyn T + 'static)` as `&dyn T`
--> src/main.rs:7:5
|
7 | (t as &dyn T).t();
| ^^^^^^^^^^^^^ invalid cast
|
help: borrow the value for the cast to be valid
|
7 | (&t as &dyn T).t();
| ^
```
This is incorrect, though: The cast will _not_ be valid when writing `&t` instead of `t`:
```
error[E0277]: the trait bound `*mut (dyn T + 'static): T` is not satisfied
--> t4.rs:7:6
|
7 | (&t as &dyn T).t();
| ^^ the trait `T` is not implemented for `*mut (dyn T + 'static)`
|
= note: required for the cast to the object type `dyn T`
```
The correct suggestion is `&*t`, which I have implemented in this pull request. Of course, this suggestion will always require an unsafe block, but arguably, that's what the user really wants if they're trying to cast a pointer to a reference.
In any case, claiming that the cast will be valid after implementing the suggestion is overly optimistic, as the coercion logic doesn't seem to resolve all nested obligations, i.e. the cast may still be invalid after implementing the suggestion. I have therefore rephrased the suggestion slightly ("consider borrowing the value" instead of "borrow the value for the cast to be valid").
Additionally, I have fixed another incorrect suggestion not mentioned in #84598, which relates to casting immutable references to mutable ones:
```rust
fn main() {
let mut x = 0;
let m = &x as &mut i32;
}
```
currently leads to
```
error[E0605]: non-primitive cast: `&i32` as `&mut i32`
--> t5.rs:3:13
|
3 | let m = &x as &mut i32;
| ^^^^^^^^^^^^^^ invalid cast
|
help: borrow the value for the cast to be valid
|
3 | let m = &mut &x as &mut i32;
| ^^^^
```
which is obviously incorrect:
```
error[E0596]: cannot borrow data in a `&` reference as mutable
--> t5.rs:3:13
|
3 | let m = &mut &x as &mut i32;
| ^^^^^^^ cannot borrow as mutable
```
I've changed the suggestion to a note explaining the problem:
```
error[E0605]: non-primitive cast: `&i32` as `&mut i32`
--> t5.rs:3:13
|
3 | let m = &x as &mut i32;
| ^^^^^^^^^^^^^^ invalid cast
|
note: this reference is immutable
--> t5.rs:3:13
|
3 | let m = &x as &mut i32;
| ^^
note: trying to cast to a mutable reference type
--> t5.rs:3:19
|
3 | let m = &x as &mut i32;
| ^^^^^^^^
```
In this example, it would have been even nicer to suggest replacing `&x` with `&mut x`, but this would be much more complex because we would have to take apart the expression to be cast (currently, we only look at its type), and `&x` could be stored in a variable, where such a suggestion would not even be directly applicable:
```rust
fn main() {
let mut x = 0;
let r = &x;
let m = r as &mut i32;
}
```
My solution covers this case, too.
Sync rustc_codegen_cranelift
The main highlight this sync is the removal of several dependencies, making compilation of cg_clif itself faster. There have also been a couple of new features like `#[link_section]` now supporting different segments for Mach-O binaries (thanks `@eggyal!)` and the `imported_main` feature, which is currently unstable.
r? `@ghost`
`@rustbot` label +A-codegen +A-cranelift +T-compiler
