Make decoding non-optional `LazyArray` panic if not set
Tables may be [defined](9649706ead/compiler/rustc_metadata/src/rmeta/mod.rs (L377)) as `optional:` or `defaulted:`. If optional, if we try to read a value from a key that was never encoded, we should panic. This has high value in ensuring correctness over a defaulted table, so the tradeoff is worth considering, since it signals the compiler has a buggy encode impl, rather than just defaulting to a value.
HOWEVER, `optional:` arrays were side-stepping this. So this PR fixes that, and makes `optional:` tables of `LazyArray` act like `LazyValue`, and panic if it's not assigned a value during encoding.
During this PR, I found that `deduced_param_attrs` has buggy (?? i think??) implementation where it will refuse to encode cross-crate `deduced_param_attrs` unless we're codegening, we're optimizing the library, and incremental is disabled. This seems incredibly wrong, but I don't want to fix it in this PR.
9649706ead/compiler/rustc_metadata/src/rmeta/encoder.rs (L1733-L1747)
This shrinks `compiler/rustc_codegen_gcc/Cargo.lock` quite a bit. The
only remaining dependencies in `compiler/rustc_codegen_gcc/Cargo.lock`
are `gccjit`, `lang_tester`, and `boml`, all of which aren't used in any
other compiler crates.
The commit also reorders and adds comments to the `extern crate` items
so they match those in miri.
Replace walk with visit so we dont skip outermost expr kind in def collector
This affects async closures with macros as their body expr. Fixes#129855.
r? ``@cjgillot`` or anyone else
Fix LLVM ABI NAME for riscv64imac-unknown-nuttx-elf
This patch fix https://github.com/rust-lang/rust/issues/129825
For the riscv64imac target, the LLVM ABI NAME should be "lp64", which is the default ABI if not specified for the riscv64imac target.
Deny imports of `rustc_type_ir::inherent` outside of type ir + new trait solver
We shouldn't encourage using `rustc_type_ir::inherent` outside of the new solver[^1], though this can happen by accident due to rust-analyzer, for example. See https://github.com/rust-lang/rust/pull/127537#discussion_r1733813842 for an example in practice.
r? fmease
[^1]: Unless we go the fully radical approach of always using these inherent methods everywhere in favor of inherent methods, which would be a major overhaul of the compiler, IMO. I don't really want to consider that possibility right now, tho.
Rewrite lint_expectations in a single pass.
This PR aims at reducing the perf regression from https://github.com/rust-lang/rust/pull/120924#issuecomment-2202486203 with drive-by simplifications.
Basically, instead of using the lint level builder, which is slow, this PR splits `lint_expectations` logic in 2:
- listing the `LintExpectations` is done in `shallow_lint_levels_on`, on a per-owner basis;
- building the unstable->stable expectation id map is done by iterating on attributes.
r? ghost for perf
add `aarch64_unknown_nto_qnx700` target - QNX 7.0 support for aarch64le
This backports the QNX 7.1 aarch64 implementation to 7.0.
* [x] required `-lregex` disabled, see https://github.com/rust-lang/libc/pull/3775 (released in libc 0.2.156)
* [x] uses `libgcc.a` instead of `libgcc_s.so` (7.0 used ancient GCC 5.4 which didn't have gcc_s)
* [x] a fix in `backtrace` crate to support stack traces https://github.com/rust-lang/backtrace-rs/pull/648
This PR bumps libc dependency to 0.2.158
CC: to the folks who did the [initial implementation](https://doc.rust-lang.org/rustc/platform-support/nto-qnx.html): `@flba-eb,` `@gh-tr,` `@jonathanpallant,` `@japaric`
# Compile target
```bash
# Configure qcc build environment
source _path_/_to_/qnx7.0/qnxsdp-env.sh
# Tell rust to use qcc when building QNX 7.0 targets
export build_env='
CC_aarch64-unknown-nto-qnx700=qcc
CFLAGS_aarch64-unknown-nto-qnx700=-Vgcc_ntoaarch64le_cxx
CXX_aarch64-unknown-nto-qnx700=qcc
AR_aarch64_unknown_nto_qnx700=ntoaarch64-ar'
# Build rust compiler, libs, and the remote test server
env $build_env ./x.py build \
--target x86_64-unknown-linux-gnu,aarch64-unknown-nto-qnx700 \
rustc library/core library/alloc library/std src/tools/remote-test-server
rustup toolchain link stage1 build/host/stage1
```
# Compile "hello world"
```bash
source _path_/_to_/qnx7.0/qnxsdp-env.sh
cargo new hello_world
cd hello_world
cargo +stage1 build --release --target aarch64-unknown-nto-qnx700
```
# Configure a remote for testing
Do this from a new shell - we will need to run more commands in the previous one. I ran into these two issues, and found some workarounds.
* Temporary dir might not work properly
* Default `remote-test-server` has issues binding to an address
```
# ./remote-test-server
starting test server
thread 'main' panicked at src/tools/remote-test-server/src/main.rs:175:29:
called `Result::unwrap()` on an `Err` value: Os { code: 249, kind: AddrNotAvailable, message: "Can't assign requested address" }
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
Specifying `--bind` param actually fixes that, and so does setting `TMPDIR` properly.
```bash
# Copy remote-test-server to remote device. You may need to use sftp instead.
# ATTENTION: Note that the path is different from the one in the remote testing documentation for some reason
scp ./build/x86_64-unknown-linux-gnu/stage1-tools-bin/remote-test-server qnxdevice:/path/
# Run ssh with port forwarding - so that rust tester can connect to the local port instead
ssh -L 12345:127.0.0.1:12345 qnxdevice
# on the device, run
rm -rf tmp && mkdir -p tmp && TMPDIR=$PWD/tmp ./remote-test-server --bind 0.0.0.0:12345
```
# Run test suit
Assume all previous environment variables are still set, or re-init them
```bash
export TEST_DEVICE_ADDR="localhost:12345"
# tidy needs to be skipped due to using un-published libc dependency
export exclude_tests='
--exclude src/bootstrap
--exclude src/tools/error_index_generator
--exclude src/tools/linkchecker
--exclude src/tools/tidy
--exclude tests/ui-fulldeps
--exclude rustc
--exclude rustdoc
--exclude tests/run-make-fulldeps'
env $build_env ./x.py test $exclude_tests --stage 1 --target aarch64-unknown-nto-qnx700
```
try-job: dist-x86_64-msvc
This patch fix https://github.com/rust-lang/rust/issues/129825
For the riscv64imac target, the LLVM ABI NAME should be "lp64",
which is the default ABI if not specified for the riscv64imac target.
Update stacker to 0.1.17
The main new feature is support for detecting the current stack size on illumos. (See [my blog post] for the context which led to this.)
[my blog post]: https://sunshowers.io/posts/rustc-segfault-illumos/
try-job: x86_64-mingw
Rollup of 11 pull requests
Successful merges:
- #128523 (Add release notes for 1.81.0)
- #129605 (Add missing `needs-llvm-components` directives for run-make tests that need target-specific codegen)
- #129650 (Clean up `library/profiler_builtins/build.rs`)
- #129651 (skip stage 0 target check if `BOOTSTRAP_SKIP_TARGET_SANITY` is set)
- #129684 (Enable Miri to pass pointers through FFI)
- #129762 (Update the `wasm-component-ld` binary dependency)
- #129782 (couple more crash tests)
- #129816 (tidy: say which feature gate has a stability issue mismatch)
- #129818 (make the const-unstable-in-stable error more clear)
- #129824 (Fix code examples buttons not appearing on click on mobile)
- #129826 (library: Fix typo in `core::mem`)
r? `@ghost`
`@rustbot` modify labels: rollup
make the const-unstable-in-stable error more clear
The default should be to add `rustc_const_unstable`, not `rustc_allow_const_fn_unstable`.
Also I discovered our check for missing const stability attributes on stable functions -- but strangely that check only kicks in for "reachable" functions. `check_missing_stability` checks for reachability since all reachable functions must have a stability attribute, but I would say if a function has `#[stable]` it should also have const-stability attributes regardless of reachability.
Update the `wasm-component-ld` binary dependency
This keeps it up-to-date by moving from 0.5.6 to 0.5.7. While here I've additionally updated some other wasm-related dependencies in the workspace to keep them up-to-date and try to avoid duplicate versions as well.
Enable Miri to pass pointers through FFI
Following https://github.com/rust-lang/rust/pull/126787, the purpose of this PR is to now enable Miri to execute native calls that make use of pointers.
> <details>
>
> <summary> Simple example </summary>
>
> ```rust
> extern "C" {
> fn ptr_printer(ptr: *mut i32);
> }
>
> fn main() {
> let ptr = &mut 42 as *mut i32;
> unsafe {
> ptr_printer(ptr);
> }
> }
> ```
> ```c
> void ptr_printer(int *ptr) {
> printf("printing pointer dereference from C: %d\n", *ptr);
> }
> ```
> should now show `printing pointer dereference from C: 42`.
>
> </details>
Note that this PR does not yet implement any logic involved in updating Miri's "analysis" state (byte initialization, provenance) upon such a native call.
r? ``@RalfJung``
Remove `#[macro_use] extern crate tracing`, round 4
Because explicit importing of macros via use items is nicer (more standard and readable) than implicit importing via #[macro_use]. Continuing the work from #124511, #124914, and #125434. After this PR no `rustc_*` crates use `#[macro_use] extern crate tracing` except for `rustc_codegen_gcc` which is a special case and I will do separately.
r? ```@jieyouxu```
llvm-wrapper: adapt for LLVM API changes
No functional changes intended.
Updates the wrapper for 21eddfac3d.
````@rustbot```` label: +llvm-main
r? ````@nikic````
Expand NLL MIR dumps
This PR is a first step to clean up and expand NLL MIR dumps:
- by restoring the "mir-include-spans" comments which are useful for `-Zdump-mir=nll`
- by adding the list of borrows to NLL MIR dumps, where they are introduced in the CFG and in which region
Comments in MIR dumps were turned off in #112346, but as shown in #114652 they were still useful for us working with NLL MIR dumps. So this PR pulls `-Z mir-include-spans` into its own options struct, so that passes dumping MIR can override them if need be. The rest of the compiler is not affected, only the "nll" pass dumps have these comments enabled again. The CLI still has priority when specifying the flag, so that we can explicitly turn them off in the `mir-opt` tests to keep blessed dumps easier to work with (which was one of the points of #112346).
Then, as part of a couple steps to improve NLL/polonius MIR dumps and `.dot` visualizations, I've also added the list of borrows and where they're introduced. I'm doing all this to help debug some polonius scope issues in my prototype location-sensitive analysis :3. I'll probably add member constraints soon.
const fn stability checking: also check declared language features
Fixes https://github.com/rust-lang/rust/issues/129656
`@oli-obk` I assume it is just an oversight that this didn't use `features().declared()`? Or is there a deep reason that this must only check `declared_lib_features`?
interpret/visitor: make memory order iteration slightly more efficient
Finally I know enough about RPIT to write this iterator signature correctly. :D
This means memory-order iteration now needs an allocation, but it avoids quadratic complexity (where it has to do a linear scan n times to find the n-th field in memory order), so that seems like a win overall. The changed code only affects Miri; the rustc changes are NOPs.
Stop using `ty::GenericPredicates` for non-predicates_of queries
`GenericPredicates` is a struct of several parts: A list of of an item's own predicates, and a parent def id (and some effects related stuff, but ignore that since it's kinda irrelevant). When instantiating these generic predicates, it calls `predicates_of` on the parent and instantiates its predicates, and appends the item's own instantiated predicates too:
acb4e8b625/compiler/rustc_middle/src/ty/generics.rs (L407-L413)
Notice how this should result in a recursive set of calls to `predicates_of`... However, `GenericPredicates` is *also* misused by a bunch of *other* queries as a convenient way of passing around a list of predicates. For these queries, we don't ever set the parent def id of the `GenericPredicates`, but if we did, then this would be very easy to mistakenly call `predicates_of` instead of some other intended parent query.
Given that footgun, and the fact that we don't ever even *use* the parent def id in the `GenericPredicates` returned from queries like `explicit_super_predicates_of`, It really has no benefit over just returning `&'tcx [(Clause<'tcx>, Span)]`.
This PR additionally opts to wrap the results of `EarlyBinder`, as we've tended to use that in the return type of these kinds of queries to properly convey that the user has params to deal with, and it also gives a convenient way of iterating over a slice of things after instantiating.
Remove `Option<!>` return types.
Several compiler functions have `Option<!>` for their return type. That's odd. The only valid return value is `None`, so why is this type used?
Because it lets you write certain patterns slightly more concisely. E.g. if you have these common patterns:
```
let Some(a) = f() else { return };
let Ok(b) = g() else { return };
```
you can shorten them to these:
```
let a = f()?;
let b = g().ok()?;
```
Huh.
An `Option` return type typically designates success/failure. How should I interpret the type signature of a function that always returns (i.e. doesn't panic), does useful work (modifying `&mut` arguments), and yet only ever fails? This idiom subverts the type system for a cute syntactic trick.
Furthermore, returning `Option<!>` from a function F makes things syntactically more convenient within F, but makes things worse at F's callsites. The callsites can themselves use `?` with F but should not, because they will get an unconditional early return, which is almost certainly not desirable. Instead the return value should be ignored. (Note that some of callsites of `process_operand`, `process_immedate`, `process_assign` actually do use `?`, though the early return doesn't matter in these cases because nothing of significance comes after those calls. Ugh.)
When I first saw this pattern I had no idea how to interpret it, and it took me several minutes of close reading to understand everything I've written above. I even started a Zulip thread about it to make sure I understood it properly. "Save a few characters by introducing types so weird that compiler devs have to discuss it on Zulip" feels like a bad trade-off to me. This commit replaces all the `Option<!>` return values and uses `else`/`return` (or something similar) to replace the relevant `?` uses. The result is slightly more verbose but much easier to understand.
r? ``````@cjgillot``````
Simplify some extern providers
Simplifies some extern crate providers:
1. Generalize the `ProcessQueryValue` identity impl to work on non-`Option` types.
2. Allow `ProcessQueryValue` to wrap its output in an `EarlyBinder`, to simplify `explicit_item_bounds`/`explicit_item_super_predicates`.
3. Use `{ table }` and friends more when possible.
Deny `wasm_c_abi` lint to nudge the last 25%
This shouldn't affect projects indirectly depending on wasm-bindgen because cargo passes `--cap-lints=allow` when building dependencies.
The motivation is that the ecosystem has mostly taken up the versions of wasm-bindgen that are compatible in general, but ~25% or so of recent downloads remain on lower versions. However, this change might still be unnecessarily disruptive. I mostly propose it as a discussion point.
linker: Synchronize native library search in rustc and linker
Also search for static libraries with alternative naming (`libname.a`) on MSVC when producing executables or dynamic libraries, and not just rlibs.
This unblocks https://github.com/rust-lang/rust/pull/123436.
try-job: x86_64-msvc
Don't make statement nonterminals match pattern nonterminals
Right now, the heuristic we use to check if a token may begin a pattern nonterminal falls back to `may_be_ident`:
ef71f1047e/compiler/rustc_parse/src/parser/nonterminal.rs (L21-L37)
This has the unfortunate side effect that a `stmt` nonterminal eagerly matches against a `pat` nonterminal, leading to a parse error:
```rust
macro_rules! m {
($pat:pat) => {};
($stmt:stmt) => {};
}
macro_rules! m2 {
($stmt:stmt) => {
m! { $stmt }
};
}
m2! { let x = 1 }
```
This PR fixes it by more accurately reflecting the set of nonterminals that may begin a pattern nonterminal.
As a side-effect, I modified `Token::can_begin_pattern` to work correctly and used that in `Parser::nonterminal_may_begin_with`.
We want to allow setting this on the CLI, override it only in MIR
passes, and disable it altogether in mir-opt tests.
The default value is "only for NLL MIR dumps", which is considered off
for all intents and purposes, except for `rustc_borrowck` when an NLL
MIR dump is requested.
Several compiler functions have `Option<!>` for their return type.
That's odd. The only valid return value is `None`, so why is this type
used?
Because it lets you write certain patterns slightly more concisely. E.g.
if you have these common patterns:
```
let Some(a) = f() else { return };
let Ok(b) = g() else { return };
```
you can shorten them to these:
```
let a = f()?;
let b = g().ok()?;
```
Huh.
An `Option` return type typically designates success/failure. How should
I interpret the type signature of a function that always returns (i.e.
doesn't panic), does useful work (modifying `&mut` arguments), and yet
only ever fails? This idiom subverts the type system for a cute
syntactic trick.
Furthermore, returning `Option<!>` from a function F makes things
syntactically more convenient within F, but makes things worse at F's
callsites. The callsites can themselves use `?` with F but should not,
because they will get an unconditional early return, which is almost
certainly not desirable. Instead the return value should be ignored.
(Note that some of callsites of `process_operand`, `process_immedate`,
`process_assign` actually do use `?`, though the early return doesn't
matter in these cases because nothing of significance comes after those
calls. Ugh.)
When I first saw this pattern I had no idea how to interpret it, and it
took me several minutes of close reading to understand everything I've
written above. I even started a Zulip thread about it to make sure I
understood it properly. "Save a few characters by introducing types so
weird that compiler devs have to discuss it on Zulip" feels like a bad
trade-off to me. This commit replaces all the `Option<!>` return values
and uses `else`/`return` (or something similar) to replace the relevant
`?` uses. The result is slightly more verbose but much easier to
understand.
This keeps it up-to-date by moving from 0.5.6 to 0.5.7. While here I've
additionally updated some other wasm-related dependencies in the
workspace to keep them up-to-date and try to avoid duplicate versions as
well.
Use a reduced recursion limit in the MIR inliner's cycle breaker
This probably papers over https://github.com/rust-lang/rust/issues/128887, but primarily I'm opening this PR because multiple compiler people have thought about making this change which probably means it's a good idea.
r? compiler-errors
debug-fmt-detail option
I'd like to propose a new option that makes `#[derive(Debug)]` generate no-op implementations that don't print anything, and makes `{:?}` in format strings a no-op.
There are a couple of motivations for this:
1. A more thorough stripping of debug symbols. Binaries stripped of debug symbols still retain some of them through `Debug` implementations. It's hard to avoid that without compiler's help, because debug formatting can be used in many places, including dependencies, and their loggers, asserts, panics, etc.
* In my testing it gives about 2% binary size reduction on top of all other binary-minimizing best practices (including `panic_immediate_abort`). There are targets like Web WASM or embedded where users pay attention to binary sizes.
* Users distributing closed-source binaries may not want to "leak" any symbol names as a matter of principle.
2. Adds ability to test whether code depends on specifics of the `Debug` format implementation in unwise ways (e.g. trying to get data unavailable via public interface, or using it as a serialization format). Because current Rust's debug implementation doesn't change, there's a risk of it becoming a fragile de-facto API that [won't be possible to change in the future](https://www.hyrumslaw.com/). An option that "breaks" it can act as a [grease](https://www.rfc-editor.org/rfc/rfc8701.html).
This implementation is a `-Z fmt-debug=opt` flag that takes:
* `full` — the default, current state.
* `none` — makes derived `Debug` and `{:?}` no-ops. Explicit `impl Debug for T` implementations are left unharmed, but `{:?}` format won't use them, so they may get dead-code eliminated if they aren't invoked directly.
* `shallow` — makes derived `Debug` print only the type's name, without recursing into fields. Fieldless enums print their variant names. `{:?}` works.
The `shallow` option is a compromise between minimizing the `Debug` code, and compatibility. There are popular proc-macro crates that use `Debug::fmt` as a way to convert enum values into their Rust source code.
There's a corresponding `cfg` flag: `#[cfg(fmt_debug = "none")]` that can be used in user code to react to this setting to minimize custom `Debug` implementations or remove unnecessary formatting helper functions.
By making it own the index maps, instead of holding references to them.
This requires moving the free function `find_candidate` into
`Candidate::reset_and_find`. It lets the `'alloc` lifetime be removed
everywhere that still has it.
Correct trusty targets to be tier 3
The Trusty targets were added in https://github.com/rust-lang/rust/pull/129490, but in that PR I accidentally marked them as tier 2. This PR corrects the target metadata to mark them as tier 3.
Move `'tcx` lifetime off of impl and onto methods for `CrateMetadataRef`
Unconstrained type and const variables are not allowed, but unconstrained lifetimes are. This is not very good style, though, and it leads to unnecessary captures of a lifetime in edition 2024 (not that it matters, but it does trigger the edition migration lint).
derive(SmartPointer): assume pointee from the single generic and better error messages
Fix#129465
Actually RFC says that `#[pointee]` can be inferred when there is no ambiguity, or there is only one generic type parameter so to say.
cc ```@Darksonn```
r? ```@compiler-errors```
Emit specific message for time<=0.3.35
```
error[E0282]: type annotations needed for `Box<_>`
--> /home/gh-estebank/.cargo/registry/src/index.crates.io-6f17d22bba15001f/time-0.3.34/src/format_description/parse/mod.rs:83:9
|
83 | let items = format_items
| ^^^^^
...
86 | Ok(items.into())
| ---- type must be known at this point
|
= note: this is an inference error on `time` caused by a change in Rust 1.80.0; update `time` to version `>=0.3.36`
```
Partially mitigate the fallout from https://github.com/rust-lang/rust/issues/127343. Although the biggest benefit of this would have been if we had had this in 1.80 before it became stable, the long-tail of that change will be felt for a *long* time, so better late than never.
We can also emit an even more targeted error instead of this inference failure.
Add an ability to convert between `Span` and `visit::Location`
AFAIK, there is no way to create a `Location` from a `Span` because its only field is private. This makes it impossible to use visitor methods like `visit_statement` or `visit_terminator`.
This PR adds an implementation for`From<Span>` for `Location` to fix this.
r? ```@celinval```
rustc_target: Add various aarch64 features
Add various aarch64 features already supported by LLVM and Linux.
Additionally include some comment fixes to ensure consistency of feature names with the Arm ARM.
Compiler support for features added to stdarch by https://github.com/rust-lang/stdarch/pull/1614.
Tracking issue for unstable aarch64 features is https://github.com/rust-lang/rust/issues/127764.
List of added features:
- FEAT_CSSC
- FEAT_ECV
- FEAT_FAMINMAX
- FEAT_FLAGM2
- FEAT_FP8
- FEAT_FP8DOT2
- FEAT_FP8DOT4
- FEAT_FP8FMA
- FEAT_HBC
- FEAT_LSE128
- FEAT_LSE2
- FEAT_LUT
- FEAT_MOPS
- FEAT_LRCPC3
- FEAT_SVE_B16B16
- FEAT_SVE2p1
- FEAT_WFxT
- FEAT_SME
- FEAT_SME_F16F16
- FEAT_SME_F64F64
- FEAT_SME_F8F16
- FEAT_SME_F8F32
- FEAT_SME_FA64
- FEAT_SME_I16I64
- FEAT_SME_LUTv2
- FEAT_SME2
- FEAT_SME2p1
- FEAT_SSVE_FP8DOT2
- FEAT_SSVE_FP8DOT4
- FEAT_SSVE_FP8FMA
FEAT_FPMR is added in the first commit and then removed in a separate one to highlight it being removed from upstream LLVM 19. The intention is for it to be detectable at runtime through stdarch but not have a corresponding Rust compile-time feature.
Implement a first version of RFC 3525: struct target features
This PR is an attempt at implementing https://github.com/rust-lang/rfcs/pull/3525, behind a feature gate `struct_target_features`.
There's obviously a few tasks that ought to be done before this is merged; in no particular order:
- add proper error messages
- add tests
- create a tracking issue for the RFC
- properly serialize/deserialize the new target_features field in `rmeta` (assuming I even understood that correctly :-))
That said, as I am definitely not a `rustc` expert, I'd like to get some early feedback on the overall approach before fixing those things (and perhaps some pointers for `rmeta`...), hence this early PR :-)
Here's an example piece of code that I have been using for testing - with the new code, the calls to intrinsics get correctly inlined:
```rust
#![feature(struct_target_features)]
use std::arch::x86_64::*;
/*
// fails to compile
#[target_feature(enable = "avx")]
struct Invalid(u32);
*/
#[target_feature(enable = "avx")]
struct Avx {}
#[target_feature(enable = "sse")]
struct Sse();
/*
// fails to compile
extern "C" fn bad_fun(_: Avx) {}
*/
/*
// fails to compile
#[inline(always)]
fn inline_fun(_: Avx) {}
*/
trait Simd {
fn do_something(&self);
}
impl Simd for Avx {
fn do_something(&self) {
unsafe {
println!("{:?}", _mm256_setzero_ps());
}
}
}
impl Simd for Sse {
fn do_something(&self) {
unsafe {
println!("{:?}", _mm_setzero_ps());
}
}
}
struct WithAvx {
#[allow(dead_code)]
avx: Avx,
}
impl Simd for WithAvx {
fn do_something(&self) {
unsafe {
println!("{:?}", _mm256_setzero_ps());
}
}
}
#[inline(never)]
fn dosomething<S: Simd>(simd: &S) {
simd.do_something();
}
fn main() {
/*
// fails to compile
Avx {};
*/
if is_x86_feature_detected!("avx") {
let avx = unsafe { Avx {} };
dosomething(&avx);
dosomething(&WithAvx { avx });
}
if is_x86_feature_detected!("sse") {
dosomething(&unsafe { Sse {} })
}
}
```
Tracking:
- https://github.com/rust-lang/rust/issues/129107
```
error[E0282]: type annotations needed for `Box<_>`
--> ~/.cargo/registry/src/index.crates.io-6f17d22bba15001f/time-0.3.34/src/format_description/parse/mod.rs:83:9
|
83 | let items = format_items
| ^^^^^
...
86 | Ok(items.into())
| ---- type must be known at this point
|
= note: this is an inference error on crate `time` caused by a change in Rust 1.80.0; update `time` to version `>=0.3.35`
```
Partially address #127343.
coverage: Rename `CodeRegion` to `SourceRegion`
LLVM uses the word "code" to refer to a particular kind of coverage mapping. This unrelated usage of the word is confusing, and makes it harder to introduce types whose names correspond to the LLVM classification of coverage kinds.
No functional changes.
Rename `BikeshedIntrinsicFrom` to `TransmuteFrom`
As our implementation of MCP411 nears completion and we begin to solicit testing, it's no longer reasonable to expect testers to type or remember `BikeshedIntrinsicFrom`. The name degrades the ease-of-reading of documentation, and the overall experience of using compiler safe transmute.
Tentatively, we'll instead adopt `TransmuteFrom`.
This name seems to be the one most likely to be stabilized, after discussion on Zulip [1]. We may want to revisit the ordering of `Src` and `Dst` before stabilization, at which point we'd likely consider `TransmuteInto` or `Transmute`.
[1] https://rust-lang.zulipchat.com/#narrow/stream/216762-project-safe-transmute/topic/What.20should.20.60BikeshedIntrinsicFrom.60.20be.20named.3F
Tracking Issue: https://github.com/rust-lang/rust/issues/99571
r? `@compiler-errors`
interpret: do not make const-eval query result depend on tcx.sess
The check against calling functions with missing target features uses `tcx.sess` to determine which target features are available. However, this can differ between different crates in a crate graph, so the same const-eval query can come to different conclusions about whether a constant evaluates successfully or not -- which is bad, we should consistently get the same result everywhere.
const-eval: do not make UbChecks behavior depend on current crate's flags
Fixes https://github.com/rust-lang/rust/issues/129552
Let's see if we can get away with just always enabling these checks.
add repr to the allowlist for naked functions
Fixes#129412 (combining unstable features #90957 (`#![feature(naked_functions)]`) and #82232 (`#![feature(fn_align)]`)
LLVM uses the word "code" to refer to a particular kind of coverage mapping.
This unrelated usage of the word is confusing, and makes it harder to introduce
types whose names correspond to the LLVM classification of coverage kinds.
Get rid of `predicates_defined_on`
This is the uncontroversial part of #129532. This simply inlines the `predicates_defined_on` into into `predicates_of`. Nothing should change here logically.
Stop storing a special inner body for the coroutine by-move body for async closures
...and instead, just synthesize an item which is treated mostly normally by the MIR pipeline.
This PR does a few things:
* We synthesize a new `DefId` for the by-move body of a closure, which has its `mir_built` fed with the output of the `ByMoveBody` MIR transformation, and some other relevant queries.
* This has the `DefKind::ByMoveBody`, which we use to distinguish it from "real" bodies (that come from HIR) which need to be borrowck'd. Introduce `TyCtxt::is_synthetic_mir` to skip over `mir_borrowck` which is called by `mir_promoted`; borrowck isn't really possible to make work ATM since it heavily relies being called on a body generated from HIR, and is redundant by the construction of the by-move-body.
* Remove the special `PassManager` hacks for handling the inner `by_move_body` stored within the coroutine's mir body. Instead, this body is fed like a regular MIR body, so it's goes through all of the `tcx.*_mir` stages normally (build -> promoted -> ...etc... -> optimized) ✨.
* Remove the `InstanceKind::ByMoveBody` shim, since now we have a "regular" def id, we can just use `InstanceKind::Item`. This also allows us to remove the corresponding hacks from codegen, such as in `fn_sig_for_fn_abi` ✨.
Notable remarks:
* ~~I know it's kind of weird to be using `DefKind::Closure` here, since it's not a distinct closure but just a new MIR body. I don't believe it really matters, but I could also use a different `DefKind`... maybe one that we could use for synthetic MIR bodies in general?~~ edit: We're doing this now.
The main `arbitrary_self_types` feature gate will shortly be reused for
a new version of arbitrary self types which we are amending per [this
RFC](https://github.com/rust-lang/rfcs/blob/master/text/3519-arbitrary-self-types-v2.md).
The main amendments are:
* _do_ support `self` types which can't safely implement `Deref`
* do _not_ support generic `self` types
* do _not_ support raw pointers as `self` types.
This PR relates to the last of those bullet points: this strips pointer
support from the current `arbitrary_self_types` feature.
We expect this to cause some amount of breakage for crates using this
unstable feature to allow raw pointer self types. If that's the case, we
want to know about it, and we want crate authors to know of the upcoming
changes.
For now, this can be resolved by adding the new
`arbitrary_self_types_pointers` feature to such crates. If we determine
that use of raw pointers as self types is common, then we may maintain
that as an unstable feature even if we come to stabilize the rest of the
`arbitrary_self_types` support in future. If we don't hear that this PR
is causing breakage, then perhaps we don't need it at all, even behind
an unstable feature gate.
[Tracking issue](https://github.com/rust-lang/rust/issues/44874)
This is [step 4 of the plan outlined here](https://github.com/rust-lang/rust/issues/44874#issuecomment-2122179688)
make it possible to enable const_precise_live_drops per-function
This makes const_precise_live_drops work with rustc_allow_const_fn_unstable so that we can stabilize individual functions that rely on const_precise_live_drops.
The goal is that we can use that to stabilize some of https://github.com/rust-lang/rust/issues/67441 without having to stabilize const_precise_live_drops.
As our implementation of MCP411 nears completion and we begin to
solicit testing, it's no longer reasonable to expect testers to
type or remember `BikeshedIntrinsicFrom`. The name degrades the
ease-of-reading of documentation, and the overall experience of
using compiler safe transmute.
Tentatively, we'll instead adopt `TransmuteFrom`.
This name seems to be the one most likely to be stabilized, after
discussion on Zulip [1]. We may want to revisit the ordering of
`Src` and `Dst` before stabilization, at which point we'd likely
consider `TransmuteInto` or `Transmute`.
[1] https://rust-lang.zulipchat.com/#narrow/stream/216762-project-safe-transmute/topic/What.20should.20.60BikeshedIntrinsicFrom.60.20be.20named.3F
Convert to_llvm_features to return Option<LLVMFeature> so that it can
return None if the requested feature is not available for the current
LLVM version.
Add match rules to filter out aarch64 features not available in LLVM 17.
FEAT_FPMR has been removed from upstream LLVM as of LLVM 19.
Remove the feature from the target features list and temporarily hack
the LLVM codegen to always enable it until the minimum LLVM version is
bumped to 19.
Add SME aarch64 features already supported by LLVM and Linux.
This commit adds compiler support for the following features:
- FEAT_SME
- FEAT_SME_F16F16
- FEAT_SME_F64F64
- FEAT_SME_F8F16
- FEAT_SME_F8F32
- FEAT_SME_FA64
- FEAT_SME_I16I64
- FEAT_SME_LUTv2
- FEAT_SME2
- FEAT_SME2p1
- FEAT_SSVE_FP8DOT2
- FEAT_SSVE_FP8DOT4
- FEAT_SSVE_FP8FMA
Add various aarch64 features already supported by LLVM and Linux.
The features are marked as unstable using a newly added symbol, i.e.
aarch64_unstable_target_feature.
Additionally include some comment fixes to ensure consistency of
feature names with the Arm ARM and support for architecture version
target features up to v9.5a.
This commit adds compiler support for the following features:
- FEAT_CSSC
- FEAT_ECV
- FEAT_FAMINMAX
- FEAT_FLAGM2
- FEAT_FP8
- FEAT_FP8DOT2
- FEAT_FP8DOT4
- FEAT_FP8FMA
- FEAT_FPMR
- FEAT_HBC
- FEAT_LSE128
- FEAT_LSE2
- FEAT_LUT
- FEAT_MOPS
- FEAT_LRCPC3
- FEAT_SVE_B16B16
- FEAT_SVE2p1
- FEAT_WFxT
Add `f16` and `f128` inline ASM support for `aarch64`
Adds `f16` and `f128` inline ASM support for `aarch64`. SIMD vector types are taken from [the ARM intrinsics list](https://developer.arm.com/architectures/instruction-sets/intrinsics/#f:`@navigationhierarchiesreturnbasetype=[float]&f:@navigationhierarchieselementbitsize=[16]&f:@navigationhierarchiesarchitectures=[A64]).` Based on the work of `@lengrongfu` in #127043.
Relevant issue: #125398
Tracking issue: #116909
`@rustbot` label +F-f16_and_f128
try-job: aarch64-gnu
try-job: aarch64-apple
Add Trusty OS as tier 3 target
This PR adds support for the [Trusty secure operating system](https://source.android.com/docs/security/features/trusty) as a Tier 3 supported target. This upstreams [the patch that we have been using](https://cs.android.com/android/platform/superproject/+/master:external/rust/crates/libc/patches/trusty.patch;l=1;drc=122e586e93a534160230dc10ae3474cf31dd8f7f) internally. This also revives https://github.com/rust-lang/rust/pull/103895 which was closed due to inactivity, and is being resumed now that time allows.
And MCP has already been done for adding this platform: rust-lang/compiler-team/issues/568
# Target Tier Policy Acknowledgements
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
- Nicole LeGare (``@randomPoison)``
- Stephen Crane (``@rinon)``
- As a fallback trusty-dev-team@google.com can be contacted
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
The two new Trusty targets, `aarch64-unknown-trusty` and `armv7-unknown-trusty` both follow the existing naming convention for similar targets.
> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
👍
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
There are no known legal issues or license incompatibilities.
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
👍
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This PR only adds the targets for the platform. `std` support will be added once platform support is added to the libc crate, which depends on the language targets being added to rustc.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
👍
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via ``@)`` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
👍
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
👍
> Tier 3 targets must be able to produce assembly using at least one of rustc's supported backends from any host target. (Having support in a fork of the backend is not sufficient, it must be upstream.)
👍
rustc: Simplify getting sysroot library directory
It was very non-obvious that `sess.target_tlib_path`, `make_target_lib_path(...)`, and `sess.target_filesearch(...).search_paths()` result in the same sysroot library directory paths.
They are however, indeed the same, because `sess.target_tlib_path` is initialized to `make_target_lib_path(...)` on `Session` creation, and they are used interchangeably.
There are still some redundant calls to `make_target_lib_path` and other inconsistent ways to obtain sysroot directories, but fixing that requires some behavior changes, while this PR is a pure refactoring.
Some places in the compiler even disagree on the number of sysroots - 1 (explicit `--sysroot` *or* default sysroot), 2 (explicit `--sysroot` *and* default sysroot), or an unclear number of `sysroot_candidates` every of which is considered.
The logic currently using `sess.target_tlib_path` or equivalents assumes one sysroot.
miri weak memory emulation: put previous value into initial store buffer
Fixes https://github.com/rust-lang/miri/issues/2164 by doing a read before each atomic write so that we can initialize the store buffer. The read suppresses memory access hooks and UB exceptions, to avoid otherwise influencing the program behavior. If the read fails, we store that as `None` in the store buffer, so that when an atomic read races with the first atomic write to some memory and previously the memory was uninitialized, we can report UB due to reading uninit memory.
``@cbeuw`` this changes a bit the way we initialize the store buffers. Not sure if you still remember all this code, but if you could have a look to make sure this still makes sense, that would be great. :)
r? ``@saethlin``
simd_shuffle intrinsic: allow argument to be passed as vector
See https://github.com/rust-lang/rust/issues/128738 for context.
I'd like to get rid of [this hack](6c0b89dfac/compiler/rustc_codegen_ssa/src/mir/block.rs (L922-L935)). https://github.com/rust-lang/rust/pull/128537 almost lets us do that since constant SIMD vectors will then be passed as immediate arguments. However, simd_shuffle for some reason actually takes an *array* as argument, not a vector, so the hack is still required to ensure that the array becomes an immediate (which then later stages of codegen convert into a vector, as that's what LLVM needs).
This PR prepares simd_shuffle to also support a vector as the `idx` argument. Once this lands, stdarch can hopefully be updated to pass `idx` as a vector, and then support for arrays can be removed, which finally lets us get rid of that hack.
Remove `ParamMode::ExplicitNamed`
This was introduced as a hack to improve a diagnostics suggestion in #61679. It was subsequently broken, but also it was an incomplete hack that I don't believe we need to support, so let's just remove it.
Remove Duplicate E0381 Label
Aims to resolve https://github.com/rust-lang/rust/issues/129274, and adds a test for the case.
Essentially, we are duplicating this span for some reason. For now, I'm just using a set to collect the spans rather than the vec. I imagine there's probably no real reason to inspect duplicates in this area, but if I'm wrong I can adjust to collect "seen spans" in just the point where this label is applied.
I'm not sure why it's producing duplicate spans. Looks like this has been this way for a while? I think it gives the duplicate label on 1.75.0 for example.
Do not ICE on non-ADT rcvr type when looking for crate version collision
When looking for multiple versions of the same crate, do not blindly construct the receiver type.
Follow up to #128786.
Fixes#129205Fixes#129216
Document & implement the transmutation modeled by `BikeshedIntrinsicFrom`
Documents that `BikeshedIntrinsicFrom` models transmute-via-union, which is slightly more expressive than the transmute-via-cast implemented by `transmute_copy`. Additionally, we provide an implementation of transmute-via-union as a method on the `BikeshedIntrinsicFrom` trait with additional documentation on the boundary between trait invariants and caller obligations.
Whether or not transmute-via-union is the right kind of transmute to model remains up for discussion [1]. Regardless, it seems wise to document the present behavior.
[1] https://rust-lang.zulipchat.com/#narrow/stream/216762-project-safe-transmute/topic/What.20'kind'.20of.20transmute.20to.20model.3F/near/426331967
Tracking Issue: https://github.com/rust-lang/rust/issues/99571
r? `@compiler-errors`
cc `@scottmcm,` `@Lokathor`
Add `#[warn(unreachable_pub)]` to a bunch of compiler crates
By default `unreachable_pub` identifies things that need not be `pub` and tells you to make them `pub(crate)`. But sometimes those things don't need any kind of visibility. So they way I did these was to remove the visibility entirely for each thing the lint identifies, and then add `pub(crate)` back in everywhere the compiler said it was necessary. (Or occasionally `pub(super)` when context suggested that was appropriate.) Tedious, but results in more `pub` removal.
There are plenty more crates to do but this seems like enough for a first PR.
r? `@compiler-errors`
Tie `impl_trait_overcaptures` lint to Rust 2024
The `impl_trait_overcaptures` lint is part of the migration to Rust 2024 and the Lifetime Capture Rules 2024. Now that we've stabilized precise capturing (RFC 3617), let's tie this lint to the `rust_2024_compatibility` lint group.
Tracking:
- https://github.com/rust-lang/rust/issues/117587
r? `@compiler-errors`
mv `build_reduced_graph_for_external_crate_res` into Resolver
`build_reduced_graph_for_external_crate_res` is only related to `Resolver`, so move it there.
r? `@petrochenkov`
const checking: properly compute the set of transient locals
For const-checking the MIR of a const/static initializer, we have to know the set of "transient" locals. The reason for this is that creating a mutable (or interior mutable) reference to a transient local is "safe" in the sense that this reference cannot possibly end up in the final value of the const -- even if it is turned into a raw pointer and stored in a union, we will see that pointer during interning and reliably reject it as dangling.
So far, we determined the set of transient locals as "locals that have a `StorageDead` somewhere". But that's not quite right -- if we had MIR like
```rust
StorageLive(_5);
StorageDead(_5);
StorageLive(_5);
// no further storage annotations for _5
```
Then we'd consider `_5` to be "transient", but it is not actually transient.
We do not currently generate such MIR, but I feel uneasy relying on subtle invariants like this. So this PR implements a proper analysis for computing the set of "transient" locals: a local is "transient" if it is guaranteed dead at all `Return` terminators.
Cc `@cjgillot`
The `impl_trait_overcaptures` lint is part of the migration to Rust
2024 and the Lifetime Capture Rules 2024. Now that we've stabilized
precise capturing (RFC 3617), let's tie this lint to the
`rust_2024_compatibility` lint group.
add back test for stable-const-can-only-call-stable-const
This got accidentally removed in https://github.com/rust-lang/rust/pull/128596 (file `tests/ui/internal/internal-unstable-const.rs`). The test has little to do with "allow internal unstable" though, so add it in a file that already tests various const stability things.
Also tweak the help that suggests to add `rustc_allow_const_fn_unstable` to make it clear that this needs team approval, since it is a fairly big gun.
Use `FxHasher` on new solver unconditionally
r? lqd
This should actually fix the inference problem in ad855fe6db, since `HashSet::default` was not inferring the hasher when `HashSet` was coming from the stdlib due to the way that defaulted types/inference vars work. You could cherry-pick this on top of your PR alternatively.
rustdoc: clean up tuple <-> primitive conversion docs
This adds a minor missing feature to `fake_variadic`, so that it can render `impl From<(T,)> for [T; 1]` correctly.
Remove redundant flags from `lower_ty_common` that can be inferred from the HIR
...and then get rid of `lower_ty_common`.
r? ``@fmease`` or re-roll if you're busy!
Use subtyping for `UnsafeFnPointer` coercion, too
I overlooked this in #129059, which changed MIR typechecking to use subtyping for other fn pointer coercions.
Fixes#129285
Make `rustc_type_ir` build on stable
This PR fixes a handful of issues that appear in `rustc_type_ir` when trying to build the new solver on stable.
r? ```@compiler-errors```
```@bors``` rollup
library: Move unstable API of new_uninit to new features
- `new_zeroed` variants move to `new_zeroed_alloc`
- the `write` fn moves to `box_uninit_write`
The remainder will be stabilized in upcoming patches, as it was decided to only stabilize `uninit*` and `assume_init`.
Print the generic parameter along with the variance in dumps.
This allows to make sure we are testing what we think we are testing.
While the tests are correct, I discovered that opaque duplicated args are in the reverse declaration order.
Add a special case for `CStr`/`CString` in the `improper_ctypes` lint
Revives #120176. Just needed to bless a test and fix an argument, but seemed reasonable to me otherwise.
Instead of saying to "consider adding a `#[repr(C)]` or `#[repr(transparent)]` attribute to this struct", we now tell users to "Use `*const ffi::c_char` instead, and pass the value from `CStr::as_ptr()`" when the type involved is a `CStr` or a `CString`.
The suggestion is not made for `&mut CString` or `*mut CString`.
r? ``````@cjgillot`````` (since you were the reviewer of the original PR #120176, but feel free to reroll)
Detect `*` operator on `!Sized` expression
The suggestion is new:
```
error[E0277]: the size for values of type `str` cannot be known at compilation time
--> $DIR/unsized-str-in-return-expr-arg-and-local.rs:15:9
|
LL | let x = *"";
| ^ doesn't have a size known at compile-time
|
= help: the trait `Sized` is not implemented for `str`
= note: all local variables must have a statically known size
= help: unsized locals are gated as an unstable feature
help: references to `!Sized` types like `&str` are `Sized`; consider not dereferencing the expression
|
LL - let x = *"";
LL + let x = "";
|
```
Fix#128199.
Retroactively feature gate `ConstArgKind::Path`
This puts the lowering introduced by #125915 under a feature gate until we fix the regressions introduced by it. Alternative to whole sale reverting the PR since it didn't seem like a very clean revert and I think this is generally a step in the right direction and don't want to get stuck landing and reverting the PR over and over :)
cc #129137 ``@camelid,`` tests taken from there. beta is branching soon so I think it makes sense to not try and rush that fix through since it wont have much time to bake and if it has issues we can't simply revert it on beta.
Fixes#128016
make writes_through_immutable_pointer a hard error
This turns the lint added in https://github.com/rust-lang/rust/pull/118324 into a hard error. This has been reported in cargo's future-compat reports since Rust 1.76 (released in February). Given that const_mut_refs is still unstable, it should be impossible to even hit this error on stable: we did accidentally stabilize some functions that can cause this error, but that got reverted in https://github.com/rust-lang/rust/pull/117905. Still, let's do a crater run just to be sure.
Given that this should only affect unstable code, I don't think it needs an FCP, but let's Cc ``@rust-lang/lang`` anyway -- any objection to making this unambiguous UB into a hard error during const-eval? This can be viewed as part of https://github.com/rust-lang/rust/pull/129195 which is already nominated for discussion.
- `new_zeroed` variants move to `new_zeroed_alloc`
- the `write` fn moves to `box_uninit_write`
The remainder will be stabilized in upcoming patches, as
it was decided to only stabilize `uninit*` and `assume_init`.
By keeping track of attributes that have been previously processed.
This fixes the `macro-rules-derive-cfg.stdout` test, and is necessary
for #124141 which removes nonterminals.
Also shrink the `SmallVec` inline size used in `IntervalSet`. 2 gives
slightly better perf than 4 now that there's an `IntervalSet` in
`Parser`, which is cloned reasonably often.
Documents that `BikeshedIntrinsicFrom` models transmute-via-union,
which is slightly more expressive than the transmute-via-cast
implemented by `transmute_copy`. Additionally, we provide an
implementation of transmute-via-union as a method on the
`BikeshedIntrinsicFrom` trait with additional documentation on
the boundary between trait invariants and caller obligations.
Whether or not transmute-via-union is the right kind of transmute
to model remains up for discussion [1]. Regardless, it seems wise
to document the present behavior.
[1] https://rust-lang.zulipchat.com/#narrow/stream/216762-project-safe-transmute/topic/What.20'kind'.20of.20transmute.20to.20model.3F/near/426331967
Rollup of 9 pull requests
Successful merges:
- #128511 (Document WebAssembly target feature expectations)
- #129243 (do not build `cargo-miri` by default on stable channel)
- #129263 (Add a missing compatibility note in the 1.80.0 release notes)
- #129276 (Stabilize feature `char_indices_offset`)
- #129350 (adapt integer comparison tests for LLVM 20 IR changes)
- #129408 (Fix handling of macro arguments within the `dropping_copy_types` lint)
- #129426 (rustdoc-search: use tighter json for names and parents)
- #129437 (Fix typo in a help diagnostic)
- #129457 (kobzol vacation)
r? `@ghost`
`@rustbot` modify labels: rollup
Fix handling of macro arguments within the `dropping_copy_types` lint
This PR fixes the handling of spans with different context (aka macro arguments) than the primary expression within the different `{drop,forget}ing_copy_types` and `{drop,forget}ing_references` lints.
<details>
<summary>Before</summary>
```
warning: calls to `std::mem::drop` with a value that implements `Copy` does nothing
--> drop_writeln.rs:5:5
|
5 | drop(writeln!(&mut msg, "test"));
| ^^^^^--------------------------^
| |
| argument has type `Result<(), std::fmt::Error>`
|
= note: `#[warn(dropping_copy_types)]` on by default
help: use `let _ = ...` to ignore the expression or result
--> /home/[..]/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/library/core/src/macros/mod.rs:688:9
|
68| let _ =
| ~~~~~~~
```
</details>
<details>
<summary>With this PR</summary>
```
warning: calls to `std::mem::drop` with a value that implements `Copy` does nothing
--> drop_writeln.rs:5:5
|
5 | drop(writeln!(&mut msg, "test"));
| ^^^^^--------------------------^
| |
| argument has type `Result<(), std::fmt::Error>`
|
= note: `#[warn(dropping_copy_types)]` on by default
help: use `let _ = ...` to ignore the expression or result
|
5 - drop(writeln!(&mut msg, "test"));
5 + let _ = writeln!(&mut msg, "test");
|
```
</details>
``````@rustbot`````` label +L-dropping_copy_types
In a case like this:
```
mod a {
mod b {
#[cfg_attr(unix, inline)]
fn f() {
#[cfg_attr(linux, inline)]
fn g1() {}
#[cfg_attr(linux, inline)]
fn g2() {}
}
}
}
```
We currently end up with the following replacement ranges.
- The lazy tokens for `f` has replacement ranges for `g1` and `g2`.
- The lazy tokens for `a` has replacement ranges for `f`, `g1`, and
`g2`.
I.e. the replacement ranges for `g1` and `g2` are duplicated. In
general, replacement ranges for inner AST nodes are duplicated up the
chain for each nested `collect_tokens` call. And the code that processes
the replacements is careful about the ordering in which the replacements
are applied, to ensure that inner replacements are applied before outer
replacements.
But all of this is unnecessary. If you apply an inner replacement and
then an outer replacement, the outer replacement completely overwrites
the inner replacement.
This commit avoids the duplication by removing replacements from
`self.capture_state.parser_replacements` when they are used. (The effect
on the example above is that the lazy tokesn for `a` no longer include
replacement ranges for `g1` and `g2`.) This eliminates the possibility
of nested replacements on individual AST nodes, which avoids the need
for careful ordering of replacements.
This example triggers an assertion failure:
```
fn f() -> u32 {
#[cfg_eval] #[cfg(not(FALSE))] 0
}
```
The sequence of events:
- `configure_annotatable` calls `parse_expr_force_collect`, which calls
`collect_tokens`.
- Within that, we end up in `parse_expr_dot_or_call`, which again calls
`collect_tokens`.
- The return value of the `f` call is the expression `0`.
- This inner call collects tokens for `0` (parser range 10..11) and
creates a replacement covering `#[cfg(not(FALSE))] 0` (parser range
0..11).
- We return to the outer `collect_tokens` call. The return value of the
`f` call is *again* the expression `0`, again with the range 10..11,
but the replacement from earlier covers the range 0..11. The code
mistakenly assumes that any attributes from an inner `collect_tokens`
call fit entirely within the body of the result of an outer
`collect_tokens` call. So it adjusts the replacement parser range
0..11 to a node range by subtracting 10, resulting in -10..1. This is
an invalid range and triggers an assertion failure.
It's tricky to follow, but basically things get complicated when an AST
node is returned from an inner `collect_tokens` call and then returned
again from an outer `collect_token` node without being wrapped in any
kind of additional layer.
This commit changes `collect_tokens` to return early in some extra cases,
avoiding the construction of lazy tokens. In the example above, the
outer `collect_tokens` returns earlier because the `0` token already has
tokens and `self.capture_state.capturing` is `Capturing::No`. This early
return avoids the creation of the invalid range and the assertion
failure.
Fixes#129166. Note: these invalid ranges have been happening for a long
time. #128725 looks like it's at fault only because it introduced the
assertion that catches the invalid ranges.
Allow rust staticlib to work with MSVC's /WHOLEARCHIVE
This fixes#129020 by renaming the `__NULL_IMPORT_DESCRIPTOR` to prevent conflicts.
try-job: dist-i686-msvc
Rollup of 8 pull requests
Successful merges:
- #128432 (WASI: forbid `unsafe_op_in_unsafe_fn` for `std::{os, sys}`)
- #129373 (Add missing module flags for CFI and KCFI sanitizers)
- #129374 (Use `assert_unsafe_precondition!` in `AsciiChar::digit_unchecked`)
- #129376 (Change `assert_unsafe_precondition` docs to refer to `check_language_ub`)
- #129382 (Add `const_cell_into_inner` to `OnceCell`)
- #129387 (Advise against removing the remaining Python scripts from `tests/run-make`)
- #129388 (Do not rely on names to find lifetimes.)
- #129395 (Pretty-print own args of existential projections (dyn-Trait w/ GAT constraints))
r? `@ghost`
`@rustbot` modify labels: rollup
Pretty-print own args of existential projections (dyn-Trait w/ GAT constraints)
Previously we would just drop them. This bug isn't that significant as it can only be triggered by user code that constrains GATs inside trait object types which is currently gated under the interim feature `generic_associated_types_extended` (whose future is questionable) or on stable if the GATs are 'disabled' in dyn-Trait via `where Self: Sized` (in which case the assoc type bindings get ignored anyway (and trigger the warn-by-default lint `unused_associated_type_bounds`)), so yeah.
Affects diagnostic output and output of `std::any::type_name{_of_val}`.
Do not rely on names to find lifetimes.
For some reason, we were trying to find the lifetime parameter from its name, instead of using the def_id we have.
This PR uses it instead. This changes some ui tests, I think to be more sensible.
Add missing module flags for CFI and KCFI sanitizers
Set the cfi-normalize-integers and kcfi-offset module flags when Control-Flow Integrity sanitizers are used, so functions generated by the LLVM backend use the same CFI/KCFI options as rustc.
cfi-normalize-integers tells LLVM to also use integer normalization for generated functions when -Zsanitizer-cfi-normalize-integers is used.
kcfi-offset specifies the number of prefix nops between the KCFI type hash and the function entry when -Z patchable-function-entry is used. Note that LLVM assumes all indirectly callable functions use the same number of prefix NOPs with -Zsanitizer=kcfi.
Set the cfi-normalize-integers and kcfi-offset module flags when
Control-Flow Integrity sanitizers are used, so functions generated by
the LLVM backend use the same CFI/KCFI options as rustc.
cfi-normalize-integers tells LLVM to also use integer normalization
for generated functions when -Zsanitizer-cfi-normalize-integers is
used.
kcfi-offset specifies the number of prefix nops between the KCFI
type hash and the function entry when -Z patchable-function-entry is
used. Note that LLVM assumes all indirectly callable functions use the
same number of prefix NOPs with -Zsanitizer=kcfi.
llvm-wrapper: adapt for LLVM 20 API changes
No functional changes intended.
Adapts llvm-wrapper for the LLVM commits 0f22d47a7a and d6d8243dcd.
`@rustbot` label: +llvm-main
r? `@nikic`
bump conflicting_repr_hints lint to be shown in dependencies
This has been a future compatibility lint for years, let's bump it up to be shown in dependencies (so that hopefully we can then make it a hard error fairly soon).
Cc https://github.com/rust-lang/rust/issues/68585
Point at explicit `'static` obligations on a trait
Given `trait Any: 'static` and a `struct` with a `Box<dyn Any + 'a>` field, point at the `'static` bound in `Any` to explain why `'a: 'static`.
```
error[E0478]: lifetime bound not satisfied
--> f202.rs:2:12
|
2 | value: Box<dyn std::any::Any + 'a>,
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: lifetime parameter instantiated with the lifetime `'a` as defined here
--> f202.rs:1:14
|
1 | struct Hello<'a> {
| ^^
note: but lifetime parameter must outlive the static lifetime
--> /home/gh-estebank/rust/library/core/src/any.rs:113:16
|
113 | pub trait Any: 'static {
| ^^^^^^^
```
Partially address #33652.
Improve diagnostic-related lints: `untranslatable_diagnostic` & `diagnostic_outside_of_impl`
Summary:
- Made `untranslatable_diagnostic` point to problematic arguments instead of the function call
(I found this misleading while working on some `A-translation` PRs: my first impression was that
the methods themselves were not translation-aware and needed to be changed,
while in reality the problem was with the hardcoded strings passed as arguments).
- Made the shared pass of `untranslatable_diagnostic` & `diagnostic_outside_of_impl` more efficient.
`@rustbot` label D-imprecise-spans A-translation
use old ctx if has same expand environment during decode span
Fixes#112680
The root reason why #112680 failed with incremental compilation on the second attempt is the difference in `opaque` between the span of the field [`ident`](https://github.com/rust-lang/rust/blob/master/compiler/rustc_hir_typeck/src/expr.rs#L2348) and the span in the incremental cache at `tcx.def_ident_span(field.did)`.
- Let's call the span of `ident` as `span_a`, which is generated by [`apply_mark_internal`](https://github.com/rust-lang/rust/blob/master/compiler/rustc_span/src/hygiene.rs#L553-L554). Its content is similar to:
```rs
span_a_ctx -> SyntaxContextData {
opaque: span_a_ctx,
opaque_and_semitransparent: span_a_ctx,
// ....
}
```
- And call the span of `tcx.def_ident_span` as `span_b`, which is generated by [`decode_syntax_context`](https://github.com/rust-lang/rust/blob/master/compiler/rustc_span/src/hygiene.rs#L1390). Its content is:
```rs
span_b_ctx -> SyntaxContextData {
opaque: span_b_ctx,
// note `span_b_ctx` is not same as `span_a_ctx`
opaque_and_semitransparent: span_b_ctx,
// ....
}
```
Although they have the same `parent` (both refer to the root) and `outer_expn`, I cannot find the specific connection between them. Therefore, I chose a solution that may not be the best: give up the incremental compile cache to ensure we can use `span_a` in this case.
r? `@petrochenkov` Do you have any advice on this? Or perhaps this solution is acceptable?
Given `trait Any: 'static` and a `struct` with a `Box<dyn Any + 'a>` field, point at the `'static` bound in `Any` to explain why `'a: 'static`.
```
error[E0478]: lifetime bound not satisfied
--> f202.rs:2:12
|
2 | value: Box<dyn std::any::Any + 'a>,
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: lifetime parameter instantiated with the lifetime `'a` as defined here
--> f202.rs:1:14
|
1 | struct Hello<'a> {
| ^^
note: but lifetime parameter must outlive the static lifetime
--> /home/gh-estebank/rust/library/core/src/any.rs:113:16
|
113 | pub trait Any: 'static {
| ^^^^^^^
```
Partially address #33652.
Use shorthand field initialization syntax more aggressively in the compiler
Caught these when cleaning up #129344 and decided to run clippy to find the rest
Use `bool` in favor of `Option<()>` for diagnostics
We originally only supported `Option<()>` for optional notes/labels, but we now support `bool`. Let's use that, since it usually leads to more readable code.
I'm not removing the support from the derive macro, though I guess we could error on it... 🤔
Make `ArgAbi::make_indirect_force` more specific
As the method is only needed for making ignored ZSTs indirect on some ABIs, rename and add a doc-comment and `self.mode` check to make it harder to accidentally misuse. Addresses review feedback from https://github.com/rust-lang/rust/pull/125854#discussion_r1721047899.
r? ``@RalfJung``
Avoid extra `cast()`s after `CStr::as_ptr()`
These used to be `&str` literals that did need a pointer cast, but that
became a no-op after switching to `c""` literals in #118566.
CFI: Erase regions when projecting ADT to its transparent non-1zst field
The output from `FieldDef::ty` (or `TyCtxt::type_of`) may have free regions (well, `'static`) -- erase it.
Fixes#129169Fixes#123685
Minor Refactor: Remove a Redundant Conditional Check
The existing code checks `where_bounds.is_empty()` twice when
it can be combined into one. Now, after combining, the refactored code reads
better and feels straightforward.
The diff doesn't make it clear. So, the current code looks like this:
``` rust
if !where_bounds.is_empty() {
err.help(format!(
"consider introducing a new type parameter `T` and adding `where` constraints:\
\n where\n T: {qself_str},\n{}",
where_bounds.join(",\n"),
));
}
let reported = err.emit();
if !where_bounds.is_empty() {
return Err(reported);
}
```
The proposed changes:
``` rust
if !where_bounds.is_empty() {
err.help(format!(
"consider introducing a new type parameter `T` and adding `where` constraints:\
\n where\n T: {qself_str},\n{}",
where_bounds.join(",\n"),
));
let reported = err.emit();
return Err(reported);
}
err.emit();
```
Special case DUMMY_SP to emit line 0/column 0 locations on DWARF platforms.
Line 0 has a special meaning in DWARF. From the version 5 spec:
The compiler may emit the value 0 in cases
where an instruction cannot be attributed to any
source line.
DUMMY_SP spans cannot be attributed to any line. However, because rustc internally stores line numbers starting at zero, lookup_debug_loc() adjusts every line number by one. Special casing DUMMY_SP to actually emit line 0 ensures rustc communicates to the debugger that there's no meaningful source code for this instruction, rather than telling the debugger to jump to line 1 randomly.
fix a broken link in `mir/mod.rs`
I discovered that the internal link in mir/mod.rs is broken, so I will fix it. The AddCallGuards is now located under rustc_mir_transform.
The PR at that time is as follows.
c5fc2609f0
ctfe: make CompileTimeInterpCx type alias public
`CompileTimeMachine` is already public so there is no good reason to not also make this public.
Also add comment explaining why `CompileTimeMachine` is public.
Don't consider locals to shadow inner items' generics
We don't want to consider the bindings from a `RibKind::Module` itself, because for an inner item that module will contain the local bindings from the function body or wherever else the inner item is being defined.
Fixes#129265
r? petrochenkov
skip updating when external binding is existed
Fixes#128813
For following code:
```rs
extern crate core;
fn f() {
use ::core;
}
macro_rules! m {
() => {
extern crate std as core;
};
}
m!();
fn main() {}
```
- In the first loop, we define `extern crate core` and `use ::core` will be referred to `core` (yes, it does not consider if there are some macros that are not expanded. Ideally, this should be delayed if there are some unexpanded macros in the root, but I didn't change it like that because it seems like a huge change).
- Then `m` is expanded, which makes `extern_prelude('core')` return `std` rather than `core`, causing the inconsistency.
r? `@petrochenkov`
Don't generate functions with the `rustc_intrinsic_must_be_overridden` attribute
Functions with the attribute `rustc_intrinsic_must_be_overridden` never be called.
r? compiler
Stabilize opaque type precise capturing (RFC 3617)
This PR partially stabilizes opaque type *precise capturing*, which was specified in [RFC 3617](https://github.com/rust-lang/rfcs/pull/3617), and whose syntax was amended by FCP in [#125836](https://github.com/rust-lang/rust/issues/125836).
This feature, as stabilized here, gives us a way to explicitly specify the generic lifetime parameters that an RPIT-like opaque type captures. This solves the problem of overcapturing, for lifetime parameters in these opaque types, and will allow the Lifetime Capture Rules 2024 ([RFC 3498](https://github.com/rust-lang/rfcs/pull/3498)) to be fully stabilized for RPIT in Rust 2024.
### What are we stabilizing?
This PR stabilizes the use of a `use<'a, T>` bound in return-position impl Trait opaque types. Such a bound fully specifies the set of generic parameters captured by the RPIT opaque type, entirely overriding the implicit default behavior. E.g.:
```rust
fn does_not_capture<'a, 'b>() -> impl Sized + use<'a> {}
// ~~~~~~~~~~~~~~~~~~~~
// This RPIT opaque type does not capture `'b`.
```
The way we would suggest thinking of `impl Trait` types *without* an explicit `use<..>` bound is that the `use<..>` bound has been *elided*, and that the bound is filled in automatically by the compiler according to the edition-specific capture rules.
All non-`'static` lifetime parameters, named (i.e. non-APIT) type parameters, and const parameters in scope are valid to name, including an elided lifetime if such a lifetime would also be valid in an outlives bound, e.g.:
```rust
fn elided(x: &u8) -> impl Sized + use<'_> { x }
```
Lifetimes must be listed before type and const parameters, but otherwise the ordering is not relevant to the `use<..>` bound. Captured parameters may not be duplicated. For now, only one `use<..>` bound may appear in a bounds list. It may appear anywhere within the bounds list.
### How does this differ from the RFC?
This stabilization differs from the RFC in one respect: the RFC originally specified `use<'a, T>` as syntactically part of the RPIT type itself, e.g.:
```rust
fn capture<'a>() -> impl use<'a> Sized {}
```
However, settling on the final syntax was left as an open question. T-lang later decided via FCP in [#125836](https://github.com/rust-lang/rust/issues/125836) to treat `use<..>` as a syntactic bound instead, e.g.:
```rust
fn capture<'a>() -> impl Sized + use<'a> {}
```
### What aren't we stabilizing?
The key goal of this PR is to stabilize the parts of *precise capturing* that are needed to enable the migration to Rust 2024.
There are some capabilities of *precise capturing* that the RFC specifies but that we're not stabilizing here, as these require further work on the type system. We hope to lift these limitations later.
The limitations that are part of this PR were specified in the [RFC's stabilization strategy](https://rust-lang.github.io/rfcs/3617-precise-capturing.html#stabilization-strategy).
#### Not capturing type or const parameters
The RFC addresses the overcapturing of type and const parameters; that is, it allows for them to not be captured in opaque types. We're not stabilizing that in this PR. Since all in scope generic type and const parameters are implicitly captured in all editions, this is not needed for the migration to Rust 2024.
For now, when using `use<..>`, all in scope type and const parameters must be nameable (i.e., APIT cannot be used) and included as arguments. For example, this is an error because `T` is in scope and not included as an argument:
```rust
fn test<T>() -> impl Sized + use<> {}
//~^ ERROR `impl Trait` must mention all type parameters in scope in `use<...>`
```
This is due to certain current limitations in the type system related to how generic parameters are represented as captured (i.e. bivariance) and how inference operates.
We hope to relax this in the future, and this stabilization is forward compatible with doing so.
#### Precise capturing for return-position impl Trait **in trait** (RPITIT)
The RFC specifies precise capturing for RPITIT. We're not stabilizing that in this PR. Since RPITIT already adheres to the Lifetime Capture Rules 2024, this isn't needed for the migration to Rust 2024.
The effect of this is that the anonymous associated types created by RPITITs must continue to capture all of the lifetime parameters in scope, e.g.:
```rust
trait Foo<'a> {
fn test() -> impl Sized + use<Self>;
//~^ ERROR `use<...>` precise capturing syntax is currently not allowed in return-position `impl Trait` in traits
}
```
To allow this involves a meaningful amount of type system work related to adding variance to GATs or reworking how generics are represented in RPITITs. We plan to do this work separately from the stabilization. See:
- https://github.com/rust-lang/rust/pull/124029
Supporting precise capturing for RPITIT will also require us to implement a new algorithm for detecting refining capture behavior. This may involve looking through type parameters to detect cases where the impl Trait type in an implementation captures fewer lifetimes than the corresponding RPITIT in the trait definition, e.g.:
```rust
trait Foo {
fn rpit() -> impl Sized + use<Self>;
}
impl<'a> Foo for &'a () {
// This is "refining" due to not capturing `'a` which
// is implied by the trait's `use<Self>`.
fn rpit() -> impl Sized + use<>;
// This is not "refining".
fn rpit() -> impl Sized + use<'a>;
}
```
This stabilization is forward compatible with adding support for this later.
### The technical details
This bound is purely syntactical and does not lower to a [`Clause`](https://doc.rust-lang.org/1.79.0/nightly-rustc/rustc_middle/ty/type.ClauseKind.html) in the type system. For the purposes of the type system (and for the types team's curiosity regarding this stabilization), we have no current need to represent this as a `ClauseKind`.
Since opaques already capture a variable set of lifetimes depending on edition and their syntactical position (e.g. RPIT vs RPITIT), a `use<..>` bound is just a way to explicitly rather than implicitly specify that set of lifetimes, and this only affects opaque type lowering from AST to HIR.
### FCP plan
While there's much discussion of the type system here, the feature in this PR is implemented internally as a transformation that happens before lowering to the type system layer. We already support impl Trait types partially capturing the in scope lifetimes; we just currently only expose that implicitly.
So, in my (errs's) view as a types team member, there's nothing for types to weigh in on here with respect to the implementation being stabilized, and I'd suggest a lang-only proposed FCP (though we'll of course CC the team below).
### Authorship and acknowledgments
This stabilization report was coauthored by compiler-errors and TC.
TC would like to acknowledge the outstanding and speedy work that compiler-errors has done to make this feature happen.
compiler-errors thanks TC for authoring the RFC, for all of his involvement in this feature's development, and pushing the Rust 2024 edition forward.
### Open items
We're doing some things in parallel here. In signaling the intention to stabilize, we want to uncover any latent issues so we can be sure they get addressed. We want to give the maximum time for discussion here to happen by starting it while other remaining miscellaneous work proceeds. That work includes:
- [x] Look into `syn` support.
- https://github.com/dtolnay/syn/issues/1677
- https://github.com/dtolnay/syn/pull/1707
- [x] Look into `rustfmt` support.
- https://github.com/rust-lang/rust/pull/126754
- [x] Look into `rust-analyzer` support.
- https://github.com/rust-lang/rust-analyzer/issues/17598
- https://github.com/rust-lang/rust-analyzer/pull/17676
- [x] Look into `rustdoc` support.
- https://github.com/rust-lang/rust/issues/127228
- https://github.com/rust-lang/rust/pull/127632
- https://github.com/rust-lang/rust/pull/127658
- [x] Suggest this feature to RfL (a known nightly user).
- [x] Add a chapter to the edition guide.
- https://github.com/rust-lang/edition-guide/pull/316
- [x] Update the Reference.
- https://github.com/rust-lang/reference/pull/1577
### (Selected) implementation history
* https://github.com/rust-lang/rfcs/pull/3498
* https://github.com/rust-lang/rfcs/pull/3617
* https://github.com/rust-lang/rust/pull/123468
* https://github.com/rust-lang/rust/issues/125836
* https://github.com/rust-lang/rust/pull/126049
* https://github.com/rust-lang/rust/pull/126753Closes#123432.
cc `@rust-lang/lang` `@rust-lang/types`
`@rustbot` labels +T-lang +I-lang-nominated +A-impl-trait +F-precise_capturing
Tracking:
- https://github.com/rust-lang/rust/issues/123432
----
For the compiler reviewer, I'll leave some inline comments about diagnostics fallout :^)
r? compiler
Added "copy" to Debug fmt for copy operands
In MIR's debug mode (--emit mir) the printing for Operands is slightly inconsistent.
The RValues - values on the right side of an Assign - are usually printed with their Operand when they are Places.
Example:
_2 = move _3
But for arguments, the operand is omitted.
_2 = _1
I propose a change be made, to display the place with the operand.
_2 = copy _1
Move and copy have different semantics, meaning this difference is important and helpful to the user. It also adds consistency to the pretty printing.
-- EDIT --
Consider this example Rust program and its MIR output with the **updated pretty printer.**
This was generated with the arguments --emit mir --crate-type lib -Zmir-opt-level=0 (Otherwise, it's optimised away since it's a junk program).
```rust
fn main(foo: i32) {
let v = 10;
if v == 20 {
foo;
}
else {
v;
}
}
```
```MIR
// WARNING: This output format is intended for human consumers only
// and is subject to change without notice. Knock yourself out.
fn main(_1: i32) -> () {
debug foo => _1;
let mut _0: ();
let _2: i32;
let mut _3: bool;
let mut _4: i32;
let _5: i32;
let _6: i32;
scope 1 {
debug v => _2;
}
bb0: {
StorageLive(_2);
_2 = const 10_i32;
StorageLive(_3);
StorageLive(_4);
_4 = copy _2;
_3 = Eq(move _4, const 20_i32);
switchInt(move _3) -> [0: bb2, otherwise: bb1];
}
bb1: {
StorageDead(_4);
StorageLive(_5);
_5 = copy _1;
StorageDead(_5);
_0 = const ();
goto -> bb3;
}
bb2: {
StorageDead(_4);
StorageLive(_6);
_6 = copy _2;
StorageDead(_6);
_0 = const ();
goto -> bb3;
}
bb3: {
StorageDead(_3);
StorageDead(_2);
return;
}
}
```
In this example program, we can see that when we move a place, it is preceded by "move". e.g. ``` _3 = Eq(move _4, const 20_i32);```. However, when we copy a place such as ```_5 = _1;```, it is not preceded by the operand in the original printout. I propose to change the print to include the copy ```_5 = copy _1``` as in this example.
Regarding the arguments part. When I originally submitted this PR, I was under the impression this only affected the print for arguments to a function, but actually, it affects anything that uses a copy. This is preferable anyway with regard to consistency. The PR is about making ```copy``` explicit.
Prevent double panic in query system, improve diagnostics
I stumbled upon a double-panic in the query system while working on something else (#129102), which hid the real error cause for what I was debugging. This PR remedies that, so unwinding should be able to present more errors. It shouldn't really be relevant for code that doesn't ICE.
safe transmute: check lifetimes
Modifies `BikeshedIntrinsicFrom` to forbid lifetime extensions on references. This static check can be opted out of with the `Assume::lifetimes` flag.
Fixes#129097
Tracking Issue: https://github.com/rust-lang/rust/issues/99571
r? `@compiler-errors`
Switch to using the v2 resolver in most workspaces
Pinning the resolver to v1 was done in 5abff3753a ("Explicit set workspace.resolver ...") in order to suppress warnings. Since there is no specific reason not to use the new resolver and since it fixes issues, change to `resolver = "2"` everywhere except library.
Fix order of normalization and recursion in const folding.
Fixes#126831.
Without this patch, type normalization is not always idempotent, which leads to all sorts of bugs in places that assume that normalizing a normalized type does nothing.
Tracking issue: https://github.com/rust-lang/rust/issues/95174
r? BoxyUwU
When deduplicating unreachable blocks, erase the source information.
After deduplication the block conceptually belongs to multiple locations in the source. Although these blocks are unreachable, in #123341 we did come across a real side effect, an unreachable block that survives into the compiled code can cause a debugger to set a breakpoint on the wrong instruction. Erasing the source information ensures that a debugger will never be misled into thinking that the unreachable block is worth setting a breakpoint on, especially after #128627.
Technically we don't need to erase the source information if all the deduplicated blocks have identical source information, but tracking that seems like more effort than it's worth.
I'll let njn redirect this one too. r? `@nnethercote`
Suggest adding Result return type for associated method in E0277.
Recommit #126515 because I messed up during rebase,
Suggest adding Result return type for associated method in E0277.
For following:
```rust
struct A;
impl A {
fn test4(&self) {
let mut _file = File::create("foo.txt")?;
//~^ ERROR the `?` operator can only be used in a method
}
```
Suggest:
```rust
impl A {
fn test4(&self) -> Result<(), Box<dyn std::error::Error>> {
let mut _file = File::create("foo.txt")?;
//~^ ERROR the `?` operator can only be used in a method
Ok(())
}
}
```
For #125997
r? `@cjgillot`
Stabilize `raw_ref_op` (RFC 2582)
This stabilizes the syntax `&raw const $expr` and `&raw mut $expr`. It has existed unstably for ~4 years now, and has been exposed on stable via the `addr_of` and `addr_of_mut` macros since Rust 1.51 (released more than 3 years ago). I think it has become clear that these operations are here to stay. So it is about time we give them proper primitive syntax. This has two advantages over the macro:
- Being macros, `addr_of`/`addr_of_mut` could in theory do arbitrary magic with the expression on which they work. The only "magic" they actually do is using the argument as a place expression rather than as a value expression. Place expressions are already a subtle topic and poorly understood by many programmers; having this hidden behind a macro using unstable language features makes this even worse. Conversely, people do have an idea of what happens below `&`/`&mut`, so we can make the subtle topic a lot more approachable by connecting to existing intuition.
- The name `addr_of` is quite unfortunate from today's perspective, given that we have accepted provenance as a reality, which means that a pointer is *not* just an address. Strict provenance has a method, `addr`, which extracts the address of a pointer; using the term `addr` in two different ways is quite unfortunate. That's why this PR soft-deprecates `addr_of` -- we will wait a long time before actually showing any warning here, but we should start telling people that the "addr" part of this name is somewhat misleading, and `&raw` avoids that potential confusion.
In summary, this syntax improves developers' ability to conceptualize the operational semantics of Rust, while making a fundamental operation frequently used in unsafe code feel properly built in.
Possible questions to consider, based on the RFC and [this](https://github.com/rust-lang/rust/issues/64490#issuecomment-1163802912) great summary by `@CAD97:`
- Some questions are entirely about the semantics. The semantics are the same as with the macros so I don't think this should have any impact on this syntax PR. Still, for completeness' sake:
- Should `&raw const *mut_ref` give a read-only pointer?
- Tracked at: https://github.com/rust-lang/unsafe-code-guidelines/issues/257
- I think ideally the answer is "no". Stacked Borrows says that pointer is read-only, but Tree Borrows says it is mutable.
- What exactly does `&raw const (*ptr).field` require? Answered in [the reference](https://doc.rust-lang.org/nightly/reference/behavior-considered-undefined.html): the arithmetic to compute the field offset follows the rules of `ptr::offset`, making it UB if it goes out-of-bounds. Making this a safe operation (using `wrapping_offset` rules) is considered too much of a loss for alias analysis.
- Choose a different syntax? I don't want to re-litigate the RFC. The only credible alternative that has been proposed is `&raw $place` instead of `&raw const $place`, which (IIUC) could be achieved by making `raw` a contextual keyword in a new edition. The type is named `*const T`, so the explicit `const` is consistent in that regard. `&raw expr` lacks the explicit indication of immutability. However, `&raw const expr` is quite a but longer than `addr_of!(expr)`.
- Shouldn't we have a completely new, better raw pointer type instead? Yes we all want to see that happen -- but I don't think we should block stabilization on that, given that such a nicer type is not on the horizon currently and given the issues with `addr_of!` mentioned above. (If we keep the `&raw $place` syntax free for this, we could use it in the future for that new type.)
- What about the lint the RFC talked about? It hasn't been implemented yet. Given that the problematic code is UB with or without this stabilization, I don't think the lack of the lint should block stabilization.
- I created an issue to track adding it: https://github.com/rust-lang/rust/issues/127724
- Other points from the "future possibilites of the RFC
- "Syntactic sugar" extension: this has not been implemented. I'd argue this is too confusing, we should stick to what the RFC suggested and if we want to do anything about such expressions, add the lint.
- Encouraging / requiring `&raw` in situations where references are often/definitely incorrect: this has been / is being implemented. On packed fields this already is a hard error, and for `static mut` a lint suggesting raw pointers is being rolled out.
- Lowering of casts: this has been implemented. (It's also an invisible implementation detail.)
- `offsetof` woes: we now have native `offset_of` so this is not relevant any more.
To be done before landing:
- [x] Suppress `unused_parens` lint around `&raw {const|mut}` expressions
- See bottom of https://github.com/rust-lang/rust/pull/127679#issuecomment-2264073752 for rationale
- Implementation: https://github.com/rust-lang/rust/pull/128782
- [ ] Update the Reference.
- https://github.com/rust-lang/reference/pull/1567
Fixes https://github.com/rust-lang/rust/issues/64490
cc `@rust-lang/lang` `@rust-lang/opsem`
try-job: x86_64-msvc
try-job: test-various
try-job: dist-various-1
try-job: armhf-gnu
try-job: aarch64-apple
Move ZST ABI handling to `rustc_target`
Currently, target specific handling of ZST function call ABI (specifically passing them indirectly instead of ignoring them) is handled in `rustc_ty_utils`, whereas all other target specific function call ABI handling is located in `rustc_target`. This PR moves the ZST handling to `rustc_target` so that all the target-specific function call ABI handling is in one place. In the process of doing so, this PR fixes#125850 by ensuring that ZST arguments are always correctly ignored in the x86-64 `"sysv64"` ABI; any code which would be affected by this fix would have ICEd before this PR. Tests are also added using `#[rustc_abi(debug)]` to ensure this behaviour does not regress.
Fixes#125850
With the new resolver, a few dependencies get brought in twice with
different licenses. For example, all dependencies from `wasm-tools`
gained Apache-2.0 and MIT options, and with the v2 resolver we were
using one version from before and one version from after this change.
This made tidy's license check difficult.
Update some minimum versions to remove duplicate dependencies and smooth
out license checking.
Modifies `BikeshedIntrinsicFrom` to forbid lifetime extensions on
references. This static check can be opted out of with the
`Assume::lifetimes` flag.
Fixes#129097
Promote Mac Catalyst targets to Tier 2, and ship with rustup
Promote the Mac Catalyst targets `x86_64-apple-ios-macabi` and `aarch64-apple-ios-macabi` to Tier 2, as per [the MCP](https://github.com/rust-lang/compiler-team/issues/761) (see that for motivation and details).
These targets are now also distributed with rustup, although without the sanitizer runtime, as that currently has trouble building, see https://github.com/rust-lang/rust/issues/129069.
Use cnum for extern crate data key
Noticed this when fixing #129184. I still have yet to put up a fix for that (mostly because I'm too lazy to minimize a test, that will come soon though).
Fix `is_val_statically_known` for floats
The LLVM intrinsic name for floats differs from the LLVM type name, so handle them explicitly. Also adds support for `f16` and `f128`.
`f16`/`f128` tracking issue: #116909
Use `ar_archive_writer` for writing COFF import libs on all backends
This is mostly the same as the llvm backend but with the cranelift version copy/pasted in place of the LLVM library.
try-job: x86_64-msvc
try-job: i686-msvc
try-job: i686-mingw
try-job: aarch64-gnu
try-job: aarch64-apple
try-job: test-various
try-job: armhf-gnu
Stabilize `unsafe_attributes`
# Stabilization report
## Summary
This is a tracking issue for the RFC 3325: unsafe attributes
We are stabilizing `#![feature(unsafe_attributes)]`, which makes certain attributes considered 'unsafe', meaning that they must be surrounded by an `unsafe(...)`, as in `#[unsafe(no_mangle)]`.
RFC: rust-lang/rfcs#3325
Tracking issue: #123757
## What is stabilized
### Summary of stabilization
Certain attributes will now be designated as unsafe attributes, namely, `no_mangle`, `export_name`, and `link_section` (stable only), and these attributes will need to be called by surrounding them in `unsafe(...)` syntax. On editions prior to 2024, this is simply an edition lint, but it will become a hard error in 2024. This also works in `cfg_attr`, but `unsafe` is not allowed for any other attributes, including proc-macros ones.
```rust
#[unsafe(no_mangle)]
fn a() {}
#[cfg_attr(any(), unsafe(export_name = "c"))]
fn b() {}
```
For a table showing the attributes that were considered to be included in the list to require unsafe, and subsequent reasoning about why each such attribute was or was not included, see [this comment here](https://github.com/rust-lang/rust/pull/124214#issuecomment-2124753464)
## Tests
The relevant tests are in `tests/ui/rust-2024/unsafe-attributes` and `tests/ui/attributes/unsafe`.
Fixes#126831.
Without this patch, type normalization is not always idempotent, which
leads to all sorts of bugs in places that assume that normalizing a
normalized type does nothing.
Use `FnSig` instead of raw `FnDecl` for `ForeignItemKind::Fn`, fix ICE for `Fn` trait error on safe foreign fn
Let's use `hir::FnSig` instead of `hir::FnDecl + hir::Safety` for `ForeignItemKind::Fn`. This consolidates some handling code between normal fns and foreign fns.
Separetly, fix an ICE where we weren't handling `Fn` trait errors for safe foreign fns.
If perf is bad for the first commit, I can rework the ICE fix to not rely on it. But if perf is good, I prefer we fix and clean up things all at once 👍
r? spastorino
Fixes#128764
Rollup of 6 pull requests
Successful merges:
- #128989 (Emit an error for invalid use of the linkage attribute)
- #129167 (mir/pretty: use `Option` instead of `Either<Once, Empty>`)
- #129168 (Return correct HirId when finding body owner in diagnostics)
- #129191 (rustdoc-json: Clean up serialization and printing.)
- #129192 (Remove useless attributes in merged doctest generated code)
- #129196 (Remove a useless ref/id/ref round-trip from `pattern_from_hir`)
r? `@ghost`
`@rustbot` modify labels: rollup
Remove a useless ref/id/ref round-trip from `pattern_from_hir`
This re-lookup of `&hir::Pat` by its ID appears to be an artifact of earlier complexity that has since been removed from the compiler.
Merely deleting the let/match results in borrow errors, but sprinkling `'tcx` in the signature allows it to work again, so I suspect that this code's current function is simply to compensate for overly loose lifetimes in the signature. Perhaps it made more sense at a time when HIR lifetimes were not tied to `'tcx`.
I spotted this while working on some more experimental changes, which is why I've extracted it into its own PR.
Return correct HirId when finding body owner in diagnostics
Fixes#129145Fixes#128810
r? ```@compiler-errors```
```rust
fn generic<const N: u32>() {}
trait Collate<const A: u32> {
type Pass;
fn collate(self) -> Self::Pass;
}
impl<const B: u32> Collate<B> for i32 {
type Pass = ();
fn collate(self) -> Self::Pass {
generic::<{ true }>()
//~^ ERROR: mismatched types
}
}
```
When type checking the `{ true }` anon const we would error with a type mismatch. This then results in diagnostics code attempting to check whether its due to a type mismatch with the return type. That logic was implemented by walking up the hir until we reached the body owner, except instead of using the `enclosing_body_owner` function it special cased various hir nodes incorrectly resulting in us walking out of the anon const and stopping at `fn collate` instead.
This then resulted in diagnostics logic inside of the anon consts `ParamEnv` attempting to do trait solving involving the `<i32 as Collate<B>>::Pass` type which ICEs because it is in the wrong environment.
I have rewritten this function to just walk up until it hits the `enclosing_body_owner` and made some other changes since I found this pretty hard to read/understand. Hopefully it's easier to understand now, it also makes it more obvious that this is not implemented in a very principled way and is definitely missing cases :)
mir/pretty: use `Option` instead of `Either<Once, Empty>`
`Either` is wasteful for a one-or-none iterator, especially since `Once`
is already an `option::IntoIter` internally. We don't really need any of
the iterator mechanisms in this case, just a single conditional insert.
Emit an error for invalid use of the linkage attribute
fixes#128486
Currently, the use of the linkage attribute for Mod, Impl,... is incorrectly permitted. This PR will correct this issue by generating errors, and I've also added some UI test cases for it.
Related: #128552.
Detect multiple crate versions on method not found
When a type comes indirectly from one crate version but the imported trait comes from a separate crate version, the called method won't be found. We now show additional context:
```
error[E0599]: no method named `foo` found for struct `dep_2_reexport::Type` in the current scope
--> multiple-dep-versions.rs:8:10
|
8 | Type.foo();
| ^^^ method not found in `Type`
|
note: there are multiple different versions of crate `dependency` in the dependency graph
--> multiple-dep-versions.rs:4:32
|
4 | use dependency::{do_something, Trait};
| ^^^^^ `dependency` imported here doesn't correspond to the right crate version
|
::: ~/rust/build/x86_64-unknown-linux-gnu/test/run-make/crate-loading/rmake_out/multiple-dep-versions-1.rs:4:1
|
4 | pub trait Trait {
| --------------- this is the trait that was imported
|
::: ~/rust/build/x86_64-unknown-linux-gnu/test/run-make/crate-loading/rmake_out/multiple-dep-versions-2.rs:4:1
|
4 | pub trait Trait {
| --------------- this is the trait that is needed
5 | fn foo(&self);
| --- the method is available for `dep_2_reexport::Type` here
```
Fix#128569, fix#110926, fix#109161, fix#81659, fix#51458, fix#32611. Follow up to #124944.
`Either` is wasteful for a one-or-none iterator, especially since `Once`
is already an `option::IntoIter` internally. We don't really need any of
the iterator mechanisms in this case, just a single conditional insert.
Fix wrong source location for some incorrect macro definitions
Fixes#95463
Currently the code will consume the next token tree after `var` when trying to parse `$var:some_type` even when it's not a `:` (e.g. a `$` when input is `($foo $bar:tt) => {}`). Additionally it will return the wrong span when it's not a `:`.
This PR fixes these problems.
Special-case alias ty during the delayed bug emission in `try_from_lit`
This PR tries to fix#116308.
A delayed bug in `try_from_lit` will not be emitted so that the compiler will not ICE when it sees the pair `(ast::LitKind::Int, ty::TyKind::Alias)` in `lit_to_const` (called from `try_from_lit`).
This PR is related to an unstable feature `adt_const_params` (#95174).
r? ``@BoxyUwU``
Rollup of 9 pull requests
Successful merges:
- #128064 (Improve docs for Waker::noop and LocalWaker::noop)
- #128922 (rust-analyzer: use in-tree `pattern_analysis` crate)
- #128965 (Remove `print::Pat` from the printing of `WitnessPat`)
- #129018 (Migrate `rlib-format-packed-bundled-libs` and `native-link-modifier-bundle` `run-make` tests to rmake)
- #129037 (Port `run-make/libtest-json` and `run-make/libtest-junit` to rmake)
- #129078 (`ParamEnvAnd::fully_perform`: we have an `ocx`, use it)
- #129110 (Add a comment explaining the return type of `Ty::kind`.)
- #129111 (Port the `sysroot-crates-are-unstable` Python script to rmake)
- #129135 (crashes: more tests)
r? `@ghost`
`@rustbot` modify labels: rollup
Remove `print::Pat` from the printing of `WitnessPat`
After the preliminary work done in #128536, we can now get rid of `print::Pat` entirely.
- First, we introduce a variant `PatKind::Print(String)`.
- Then we incrementally remove each other variant of `PatKind`, by having the relevant code produce `PatKind::Print` instead.
- Once `PatKind::Print` is the only remaining variant, it becomes easy to remove `print::Pat` and replace it with `String`.
There is more cleanup that I have in mind, but this seemed like a natural stopping point for one PR.
r? ```@Nadrieril```
This commit does the following.
- Renames `collect_tokens_trailing_token` as `collect_tokens`, because
(a) it's annoying long, and (b) the `_trailing_token` bit is less
accurate now that its types have changed.
- In `collect_tokens`, adds a `Option<CollectPos>` argument and a
`UsePreAttrPos` in the return type of `f`. These are used in
`parse_expr_force_collect` (for vanilla expressions) and in
`parse_stmt_without_recovery` (for two different cases of expression
statements). Together these ensure are enough to fix all the problems
with token collection and assoc expressions. The changes to the
`stringify.rs` test demonstrate some of these.
- Adds a new test. The code in this test was causing an assertion
failure prior to this commit, due to an invalid `NodeRange`.
The extra complexity is annoying, but necessary to fix the existing
problems.
This pre-existing type is suitable for use with the return value of the
`f` parameter in `collect_tokens_trailing_token`. The more descriptive
name will be useful because the next commit will add another boolean
value to the return value of `f`.
Fix projections when parent capture is by-ref but child capture is by-value in the `ByMoveBody` pass
This fixes a somewhat strange bug where we build the incorrect MIR in #129074. This one is weird, but I don't expect it to actually matter in practice since it almost certainly results in a move error in borrowck. However, let's not ICE.
Given the code:
```
#![feature(async_closure)]
// NOT copy.
struct Ty;
fn hello(x: &Ty) {
let c = async || {
*x;
//~^ ERROR cannot move out of `*x` which is behind a shared reference
};
}
fn main() {}
```
The parent coroutine-closure captures `x: &Ty` by-ref, resulting in an upvar of `&&Ty`. The child coroutine captures `x` by-value, resulting in an upvar of `&Ty`. When constructing the by-move body for the coroutine-closure, we weren't applying an additional deref projection to convert the parent capture into the child capture, resulting in an type error in assignment, which is a validation ICE.
As I said above, this only occurs (AFAICT) in code that eventually results in an error, because it is only triggered by HIR that attempts to move a non-copy value out of a ref. This doesn't occur if `Ty` is `Copy`, since we'd instead capture `x` by-ref in the child coroutine.
Fixes#129074
Infer async closure args from `Fn` bound even if there is no corresponding `Future` bound on return
In #127482, I implemented the functionality to infer an async closure signature when passed into a function that has `Fn` + `Future` where clauses that look like:
```
fn whatever(callback: F)
where
F: Fn(Arg) -> Fut,
Fut: Future<Output = Out>,
```
However, #127781 demonstrates that this is still incomplete to address the cases users care about. So let's not bail when we fail to find a `Future` bound, and try our best to just use the args from the `Fn` bound if we find it. This is *fine* since most users of closures only really care about the *argument* types for inference guidance, since we require the receiver of a `.` method call to be known in order to probe methods.
When I experimented with programmatically rewriting `|| async {}` to `async || {}` in #127827, this also seems to have fixed ~5000 regressions (probably all coming from usages `TryFuture`/`TryStream` from futures-rs): the [before](https://github.com/rust-lang/rust/pull/127827#issuecomment-2254061733) and [after](https://github.com/rust-lang/rust/pull/127827#issuecomment-2255470176) crater runs.
Fixes#127781.
Use `impl PartialEq<TokenKind> for Token` more.
This lets us compare a `Token` with a `TokenKind`. It's used a lot, but can be used even more, avoiding the need for some `.kind` uses.
r? `@spastorino`
Unconditionally allow shadow call-stack sanitizer for AArch64
It is possible to do so whenever `-Z fixed-x18` is applied.
cc ``@Darksonn`` for context
The reasoning is that, as soon as reservation on `x18` is forced through the flag `fixed-x18`, on AArch64 the option to instrument with [Shadow Call Stack sanitizer](https://clang.llvm.org/docs/ShadowCallStack.html) is then applicable regardless of the target configuration.
At the every least, we would like to relax the restriction on specifically `aarch64-unknonw-none`. For this option, we can include a documentation change saying that users of compiled objects need to ensure that they are linked to runtime with Shadow Call Stack instrumentation support.
Related: #121972
Rework MIR inlining debuginfo so function parameters show up in debuggers.
Line numbers of multiply-inlined functions were fixed in #114643 by using a single DISubprogram. That, however, triggered assertions because parameters weren't deduplicated. The "solution" to that in #115417 was to insert a DILexicalScope below the DISubprogram and parent all of the parameters to that scope. That fixed the assertion, but debuggers (including gdb and lldb) don't recognize variables that are not parented to the subprogram itself as parameters, even if they are emitted with DW_TAG_formal_parameter.
Consider the program:
```rust
use std::env;
#[inline(always)]
fn square(n: i32) -> i32 {
n * n
}
#[inline(never)]
fn square_no_inline(n: i32) -> i32 {
n * n
}
fn main() {
let x = square(env::vars().count() as i32);
let y = square_no_inline(env::vars().count() as i32);
println!("{x} == {y}");
}
```
When making a release build with debug=2 and rustc 1.82.0-nightly (8b3870784 2024-08-07)
```
(gdb) r
Starting program: /ephemeral/tmp/target/release/tmp [Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Breakpoint 1, tmp::square () at src/main.rs:5
5 n * n
(gdb) info args
No arguments.
(gdb) info locals
n = 31
(gdb) c
Continuing.
Breakpoint 2, tmp::square_no_inline (n=31) at src/main.rs:10
10 n * n
(gdb) info args
n = 31
(gdb) info locals
No locals.
```
This issue is particularly annoying because it removes arguments from stack traces.
The DWARF for the inlined function looks like this:
```
< 2><0x00002132 GOFF=0x00002132> DW_TAG_subprogram
DW_AT_linkage_name _ZN3tmp6square17hc507052ff3d2a488E
DW_AT_name square
DW_AT_decl_file 0x0000000f /ephemeral/tmp/src/main.rs
DW_AT_decl_line 0x00000004
DW_AT_type 0x00001a56<.debug_info+0x00001a56>
DW_AT_inline DW_INL_inlined
< 3><0x00002142 GOFF=0x00002142> DW_TAG_lexical_block
< 4><0x00002143 GOFF=0x00002143> DW_TAG_formal_parameter
DW_AT_name n
DW_AT_decl_file 0x0000000f /ephemeral/tmp/src/main.rs
DW_AT_decl_line 0x00000004
DW_AT_type 0x00001a56<.debug_info+0x00001a56>
< 4><0x0000214e GOFF=0x0000214e> DW_TAG_null
< 3><0x0000214f GOFF=0x0000214f> DW_TAG_null
```
That DW_TAG_lexical_block inhibits every debugger I've tested from recognizing 'n' as a parameter.
This patch removes the additional lexical scope. Parameters can be easily deduplicated by a tuple of their scope and the argument index, at the trivial cost of taking a Hash + Eq bound on DIScope.
Use the `enum2$` Natvis visualiser for repr128 C-style enums
Use the preexisting `enum2$` Natvis visualiser to allow PDB debuggers to display fieldless `#[repr(u128)]]`/`#[repr(i128)]]` enums correctly.
Tracking issue: #56071
try-job: x86_64-msvc
Use `append` instead of `extend(drain(..))`
The first commit adds `IndexVec::append` that forwards to `Vec::append`, and uses it in a couple places.
The second commit updates `indexmap` for its new `IndexMap::append`, and also uses that in a couple places.
These changes are similar to what [`clippy::extend_with_drain`](https://rust-lang.github.io/rust-clippy/master/index.html#/extend_with_drain) would suggest, just for other collection types.
derive(SmartPointer): register helper attributes
Fix#128888
This PR enables built-in macros to register helper attributes, if any, to support correct name resolution in the correct lexical scope under the macros.
Also, `#[pointee]` is moved into the scope under `derive(SmartPointer)`.
cc `@Darksonn` `@davidtwco`
Add powerpc-unknown-linux-muslspe compile target
This is almost identical to already existing targets:
- powerpc_unknown_linux_musl.rs
- powerpc_unknown_linux_gnuspe.rs
It has support for PowerPC SPE (muslspe), which
can be used with GCC version up to 8. It is useful for Freescale or IBM cores like e500.
This was verified to be working with OpenWrt build system for CZ.NIC's Turris 1.x routers, which are using Freescale P2020, e500v2, so add it as a Tier 3 target.
Follow-up of https://github.com/rust-lang/rust/pull/100860
Make the rendered html doc for rustc better
This PR adds `|` to make the html doc of [`rustc_error::Level`](https://doc.rust-lang.org/1.80.0/nightly-rustc/rustc_errors/enum.Level.html) rendered better. Previsouly it looks good in the source code, but not rendered correctly in the html doc.
r? `@GuillaumeGomez`
Record the correct target type when coercing fn items/closures to pointers
Self-explanatory. We were previously not recording the *target* type of a coercion as the output of an adjustment. This should remedy that.
We must also modify the function pointer casts in MIR typeck to use subtyping, since those broke since #118247.
r? lcnr
`-Znext-solver` caching
This PR has two major changes while also fixing multiple issues found via fuzzing.
The main optimization is the ability to not discard provisional cache entries when popping the highest cycle head the entry depends on. This fixes the hang in Fuchsia with `-Znext-solver=coherence`.
It also bails if the result of a fixpoint iteration is ambiguous, even without reaching a fixpoint. This is necessary to avoid exponential blowup if a coinductive cycle results in ambiguity, e.g. due to unknowable candidates in coherence.
Updating stack entries pretty much exclusively happens lazily now, so `fn check_invariants` ended up being mostly useless and I've removed it. See https://gist.github.com/lcnr/8de338fdb2685581e17727bbfab0622a for the invariants we would be able to assert with it.
For a general overview, see the in-process update of the relevant rustc-dev-guide chapter: https://hackmd.io/1ALkSjKlSCyQG-dVb_PUHw
r? ```@compiler-errors```
Rollup of 7 pull requests
Successful merges:
- #122884 (Optimize integer `pow` by removing the exit branch)
- #127857 (Allow to customize `// TODO:` comment for deprecated safe autofix)
- #129034 (Add `#[must_use]` attribute to `Coroutine` trait)
- #129049 (compiletest: Don't panic on unknown JSON-like output lines)
- #129050 (Emit a warning instead of an error if `--generate-link-to-definition` is used with other output formats than HTML)
- #129056 (Fix one usage of target triple in bootstrap)
- #129058 (Add mw back to review rotation)
r? `@ghost`
`@rustbot` modify labels: rollup
Remove a no-longer-true assert
Fixes https://github.com/rust-lang/rust/issues/129009
The assert was simply no longer true. I thought my test suite was thorough but I had not noticed these `let`-specific diagnostics codepaths.
r? `@compiler-errors`
Shrink `TyKind::FnPtr`.
By splitting the `FnSig` within `TyKind::FnPtr` into `FnSigTys` and `FnHeader`, which can be packed more efficiently. This reduces the size of the hot `TyKind` type from 32 bytes to 24 bytes on 64-bit platforms. This reduces peak memory usage by a few percent on some benchmarks. It also reduces cache misses and page faults similarly, though this doesn't translate to clear cycles or wall-time improvements on CI.
r? `@compiler-errors`
Allow to customize `// TODO:` comment for deprecated safe autofix
Relevant for the deprecation of `CommandExt::before_exit` in #125970.
Tracking:
- #124866
bootstrap: don't use rustflags for `--rustc-args`
r? `@onur-ozkan`
This is going to require a bit of context.
https://github.com/rust-lang/rust/pull/47558 has added `--rustc-args` to `./x test` to allow passing flags when building `compiletest` tests. It was made specifically because using `RUSTFLAGS` would rebuild the compiler/stdlib, which would in turn require the flag you want to build tests with to successfully bootstrap.
#113178 made the request that it also works for other tests and doctests. This is not trivial to support across the board for `library`/`compiler` unit-tests/doctests and across stages. This issue was closed in #113948 by using `RUSTFLAGS`, seemingly incorrectly since https://github.com/rust-lang/rust/pull/123489 fixed that part to make it work.
Unfortunately #123489/#113948 have regressed the goals of `--rustc-args`:
- now we can't use rustc args that don't bootstrap, to run the UI tests: we can't test incomplete features. The new trait solver doesn't bootstrap, in-progress borrowck/polonius changes don't bootstrap, some other features are similarly incomplete, etc.
- using the flag now rebuilds everything from scratch: stage0 stdlib, stage1 compiler, stage1 stdlib. You don't need to re-do all this to compile UI tests, you only need the latter to run stdlib tests with a new flag, etc. This happens for contributors, but also on CI today. (Not to mention that in doing that it will rebuild things with flags that are not meant to be used, e.g. stdlib cfgs that don't exist in the compiler; or you could also imagine that this silently enables flags that were not meant to be enabled in this way).
Since then, bd71c71ea0 has started using it to test a stdlib feature, relying on the fact that it now rebuilds everything. So #125011 also regressed CI times more than necessary because it rebuilds everything instead of just stage 1 stdlib.
It's not easy for me to know how to properly fix#113178 in bootstrap, but #113948/#123489 are not it since they regress the initial intent. I'd think bootstrap would have to know from the list of test targets that are passed that the `library` or `compiler` paths that are passed could require rebuilding these crates with different rustflags, probably also depending on stages. Therefore I would not be able to fix it, and will just try in this PR to unregress the situation to unblock the initial use-case.
It seems miri now also uses `./x miri --rustc-args` in this incorrect meaning to rebuild the `library` paths they support to run with the new args. I've not made any bootstrap changes related to `./x miri` in this PR, so `--rustc-args` wouldn't work there anymore. I'd assume this would need to use rustflags again but I don't know how to make that work properly in bootstrap, hence opening as draft, so you can tell me how to do that. I assume we don't want to break their use-case again now that it exists, even though there are ways to use `./x test` to do exactly that.
`RUSTFLAGS_NOT_BOOTSTRAP=flag ./x test library/std` is a way to run unit tests with a new flag without rebuilding everything, while with #123489 there is no way anymore to run tests with a flag that doesn't bootstrap.
---
edit: after review, this PR:
- renames `./x test --rustc-args` to `./x test --compiletest-rustc-args` as it only applies there, and cannot use rustflags for this purpose.
- fixes the regression that using these args rebuilt everything from scratch
- speeds up some CI jobs via the above point
- removes `./x miri --rustc-args` as only library tests are supported, needs to rebuild libstd, and `./x miri --compiletest-rustc-args` wouldn't work since compiletests are not supported.
Refactor `powerpc64` call ABI handling
As the [specification](https://openpowerfoundation.org/specifications/64bitelfabi/) for the ELFv2 ABI states that returned aggregates are returned like arguments as long as they are at most two doublewords, I've merged the `classify_arg` and `classify_ret` functions to reduce code duplication. The only functional change is to fix#128579: the `classify_ret` function was incorrectly handling aggregates where `bits > 64 && bits < 128`. I've used the aggregate handling implementation from `classify_arg` which doesn't have this issue.
`@awilfox` could you test this on `powerpc64-unknown-linux-musl`? I'm only able to cross-test on `powerpc64-unknown-linux-gnu` and `powerpc64le-unknown-linux-gnu` locally at the moment, and as a tier 3 target `powerpc64-unknown-linux-musl` has zero CI coverage.
Fixes: #128579
miri: make vtable addresses not globally unique
Miri currently gives vtables a unique global address. That's not actually matching reality though. So this PR enables Miri to generate different addresses for the same type-trait pair.
To avoid generating an unbounded number of `AllocId` (and consuming unbounded amounts of memory), we use the "salt" technique that we also already use for giving constants non-unique addresses: the cache is keyed on a "salt" value n top of the actually relevant key, and Miri picks a random salt (currently in the range `0..16`) each time it needs to choose an `AllocId` for one of these globals -- that means we'll get up to 16 different addresses for each vtable. The salt scheme is integrated into the global allocation deduplication logic in `tcx`, and also used for functions and string literals. (So this also fixes the problem that casting the same function to a fn ptr over and over will consume unbounded memory.)
r? `@saethlin`
Fixes https://github.com/rust-lang/miri/issues/3737
Line numbers of multiply-inlined functions were fixed in #114643 by using a
single DISubprogram. That, however, triggered assertions because parameters
weren't deduplicated. The "solution" to that in #115417 was to insert a
DILexicalScope below the DISubprogram and parent all of the parameters to that
scope. That fixed the assertion, but debuggers (including gdb and lldb) don't
recognize variables that are not parented to the subprogram itself as parameters,
even if they are emitted with DW_TAG_formal_parameter.
Consider the program:
use std::env;
fn square(n: i32) -> i32 {
n * n
}
fn square_no_inline(n: i32) -> i32 {
n * n
}
fn main() {
let x = square(env::vars().count() as i32);
let y = square_no_inline(env::vars().count() as i32);
println!("{x} == {y}");
}
When making a release build with debug=2 and rustc 1.82.0-nightly (8b3870784 2024-08-07)
(gdb) r
Starting program: /ephemeral/tmp/target/release/tmp
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Breakpoint 1, tmp::square () at src/main.rs:5
5 n * n
(gdb) info args
No arguments.
(gdb) info locals
n = 31
(gdb) c
Continuing.
Breakpoint 2, tmp::square_no_inline (n=31) at src/main.rs:10
10 n * n
(gdb) info args
n = 31
(gdb) info locals
No locals.
This issue is particularly annoying because it removes arguments from stack traces.
The DWARF for the inlined function looks like this:
< 2><0x00002132 GOFF=0x00002132> DW_TAG_subprogram
DW_AT_linkage_name _ZN3tmp6square17hc507052ff3d2a488E
DW_AT_name square
DW_AT_decl_file 0x0000000f /ephemeral/tmp/src/main.rs
DW_AT_decl_line 0x00000004
DW_AT_type 0x00001a56<.debug_info+0x00001a56>
DW_AT_inline DW_INL_inlined
< 3><0x00002142 GOFF=0x00002142> DW_TAG_lexical_block
< 4><0x00002143 GOFF=0x00002143> DW_TAG_formal_parameter
DW_AT_name n
DW_AT_decl_file 0x0000000f /ephemeral/tmp/src/main.rs
DW_AT_decl_line 0x00000004
DW_AT_type 0x00001a56<.debug_info+0x00001a56>
< 4><0x0000214e GOFF=0x0000214e> DW_TAG_null
< 3><0x0000214f GOFF=0x0000214f> DW_TAG_null
That DW_TAG_lexical_block inhibits every debugger I've tested from recognizing
'n' as a parameter.
This patch removes the additional lexical scope. Parameters can be easily
deduplicated by a tuple of their scope and the argument index, at the trivial
cost of taking a Hash + Eq bound on DIScope.
Store `do_not_recommend`-ness in impl header
Alternative to #128674
It's less flexible, but also less invasive. Hopefully it's also performant. I'd recommend we think separately about the design for how to gate arbitrary diagnostic attributes moving forward.
Normalize struct tail properly for `dyn` ptr-to-ptr casting in new solver
Realized that the new solver didn't handle ptr-to-ptr casting correctly.
r? lcnr
Built on #128694
When encountering the following, mention the precense of conflicting crates:
```
error[E0599]: no function or associated item named `get_decoded` found for struct `HpkeConfig` in the current scope
--> src/main.rs:7:17
|
7 | HpkeConfig::get_decoded(&foo);
| ^^^^^^^^^^^ function or associated item not found in `HpkeConfig`
|
note: if you're trying to build a new `HpkeConfig`, consider using `HpkeConfig::new` which returns `HpkeConfig`
--> ~/.cargo/registry/src/index.crates.io-6f17d22bba15001f/janus_messages-0.3.1/src/lib.rs:908:5
|
908 | / pub fn new(
909 | | id: HpkeConfigId,
910 | | kem_id: HpkeKemId,
911 | | kdf_id: HpkeKdfId,
912 | | aead_id: HpkeAeadId,
913 | | public_key: HpkePublicKey,
914 | | ) -> HpkeConfig {
| |___________________^
note: there are multiple different versions of crate `prio` in the dependency graph
--> src/main.rs:1:5
|
1 | use prio::codec::Decode;
| ^^^^^^^^^^^^^^^^^^^ `prio` imported here doesn't correspond to the right crate version
|
::: ~/.cargo/registry/src/index.crates.io-6f17d22bba15001f/prio-0.9.1/src/codec.rs:35:1
|
35 | pub trait Decode: Sized {
| ----------------------- this is the trait that was imported
|
::: ~/.cargo/registry/src/index.crates.io-6f17d22bba15001f/prio-0.10.3/src/codec.rs:35:1
|
35 | pub trait Decode: Sized {
| ----------------------- this is the trait that is needed
...
43 | fn get_decoded(bytes: &[u8]) -> Result<Self, CodecError> {
| -------------------------------------------------------- the method is available for `HpkeConfig` here
help: there is an associated function `decode` with a similar name
|
7 | HpkeConfig::decode(&foo);
| ~~~~~~
```
When a type comes indirectly from one crate version but the imported trait comes from a separate crate version, the called method won't be found. We now show additional context:
```
error[E0599]: no method named `foo` found for struct `dep_2_reexport::Type` in the current scope
--> multiple-dep-versions.rs:8:10
|
8 | Type.foo();
| ^^^ method not found in `Type`
|
note: you have multiple different versions of crate `dependency` in your dependency graph
--> multiple-dep-versions.rs:4:32
|
4 | use dependency::{do_something, Trait};
| ^^^^^ `dependency` imported here doesn't correspond to the right crate version
|
::: ~/rust/build/x86_64-unknown-linux-gnu/test/run-make/crate-loading/rmake_out/multiple-dep-versions-1.rs:4:1
|
4 | pub trait Trait {
| --------------- this is the trait that was imported
|
::: ~/rust/build/x86_64-unknown-linux-gnu/test/run-make/crate-loading/rmake_out/multiple-dep-versions-2.rs:4:1
|
4 | pub trait Trait {
| --------------- this is the trait that is needed
5 | fn foo(&self);
| --- the method is available for `dep_2_reexport::Type` here
```
Fix bug in `Parser::look_ahead`.
The special case was failing to handle invisible delimiters on one path.
Fixes (but doesn't close until beta backported) #128895.
r? `@davidtwco`
const vector passed through to codegen
This allows constant vectors using a repr(simd) type to be propagated
through to the backend by reusing the functionality used to do a similar
thing for the simd_shuffle intrinsic
#118209
r? RalfJung
nontemporal_store: make sure that the intrinsic is truly just a hint
The `!nontemporal` flag for stores in LLVM *sounds* like it is just a hint, but actually, it is not -- at least on x86, non-temporal stores need very special treatment by the programmer or else the Rust memory model breaks down. LLVM still treats these stores as-if they were normal stores for optimizations, which is [highly dubious](https://github.com/llvm/llvm-project/issues/64521). Let's avoid all that dubiousness by making our own non-temporal stores be truly just a hint, which is possible on some targets (e.g. ARM). On all other targets, non-temporal stores become regular stores.
~~Blocked on https://github.com/rust-lang/stdarch/pull/1541 propagating to the rustc repo, to make sure the `_mm_stream` intrinsics are unaffected by this change.~~
Fixes https://github.com/rust-lang/rust/issues/114582
Cc `@Amanieu` `@workingjubilee`
this makes it easier to maintain and modify going forward.
There may be a small performance cost as we now need to
access the provisional cache *and* walk through the stack
to detect cycles. However, the provisional cache should be
mostly empty and the stack should only have a few elements
so the performance impact is likely minimal.
Given the complexity of the search graph maintainability
trumps linear performance improvements.
doing so requires overwriting global cache entries and
generally adds significant complexity to the solver. This is
also only ever done for root goals, so it feels easier to wrap
the `evaluate_canonical_goal` in an ordinary query if
necessary.
Link `std` statically in `rustc_driver`
This makes `rustc_driver` statically link to `std`. This is done by not passing `-C prefer-dynamic` when building `rustc_driver`. However building `rustc-main` won't work currently as it tries to dynamically link to both `rustc_driver` and `std` resulting in a crate graph with `std` duplicated. To fix that new command line option `-Z prefer_deps_of_dynamic` is added which prevents linking to a dylib if there's a static variant of it already statically linked into another dylib dependency.
The main motivation for this change is to enable `#[global_allocator]` to be used in `rustc_driver` allowing overriding the allocator used in rustc on all platforms.
---
Instead of adding `-Z prefer_deps_of_dynamic`, this PR is changed to crate opt-in to the linking change via the `rustc_private` feature instead, as that would be typically needed to link to `rustc_driver` anyway.
---
try-job: aarch64-apple
try-job: x86_64-msvc
try-job: i686-mingw
try-job: dist-x86_64-msvc
try-job: aarch64-gnu
rm `import.used`
By the way, `import_used_map` will only be used during `build_reduced_graph` and `finalize`, so it can be split from `Resolver` in the future.
r? ``@petrochenkov``
Use more slice patterns inside the compiler
Nothing super noteworthy. Just replacing the common 'fragile' pattern of "length check followed by indexing or unwrap" with slice patterns for legibility and 'robustness'.
r? ghost
Promote aarch64-apple-darwin to Tier 1
This promotes aarch64-apple-darwin to Tier 1 status as per rust-lang/rfcs#3671 and tracking issue #73908. Not sure what else is necessary for this to impement the aforementioned RFC, however I figured I'd try. I did read in previous issues and PRs that the necessary infrastructure was already in place for the aarch64-apple-darwin target, and the RFC mentions the same. So this should be all thats necessary in order for the target to be promoted.
This is a recreation of my previous PR because I accidentally did an incorrect git rebase which caused unnecessary changes to various commit SHAs. So this PR is a recreation of my previous PR without said stumble. My bad.
Preliminary cleanup of `WitnessPat` hoisting/printing
Follow-up to #128430.
The eventual goal is to remove `print::Pat` entirely, but in the course of working towards that I made so many small improvements that it seems wise to let those be reviewed/merged on their own first.
Best reviewed commit-by-commit, most of which should be pretty simple and straightforward.
r? ``@Nadrieril``
Fix `ElaborateBoxDerefs` on debug varinfo
Slightly simplifies the `ElaborateBoxDerefs` pass to fix cases where it was applying the wrong projections to debug var infos containing places that deref boxes.
From what I can tell[^1], we don't actually have any tests (or code anywhere, really) that exercise `debug x => *(...: Box<T>)`, and it's very difficult to trigger this in surface Rust, so I wrote a custom MIR test.
What happens is that the pass was turning `*(SOME_PLACE: Box<T>)` into `*(*((((SOME_PLACE).0: Unique<T>).0: NonNull<T>).0: *const T))` in debug var infos. In particular, notice the *double deref*, which was wrong.
This is the root cause of #128554, so this PR fixes#128554 as well. The reason that async closures was affected is because of the way that we compute the [`ByMove` body](https://github.com/rust-lang/rust/blob/master/compiler/rustc_mir_transform/src/coroutine/by_move_body.rs), which resulted in `*(...: Box<T>)` in debug var info. But this really has nothing to do with async closures.
[^1]: Validated by literally replacing the `if elem == PlaceElem::Deref && base_ty.is_box() { ... }` innards with a `panic!()`, which compiled all of stage2 without panicking.
1. Decouple them.
2. Make logic around `diagnostic_outside_of_impl`'s early exits simpler.
3. Make `untranslatable_diagnostic` run one loop instead of two
and not allocate an intermediate vec.
4. Overall, reduce the amount of code executed
when the lints do not end up firing.
Differentiate between methods and associated functions in diagnostics
Accurately refer to assoc fn without receiver as assoc fn instead of methods. Add `AssocItem::descr` method to centralize where we call methods and associated functions.
