Always use the `Fn(T) -> R` format when printing closure traits instead of `Fn<(T,), Output = R>`.
Fix#67100:
```
error[E0277]: expected a `Fn()` closure, found `F`
--> file.rs:6:13
|
6 | call_fn(f)
| ------- ^ expected an `Fn()` closure, found `F`
| |
| required by a bound introduced by this call
|
= note: wrap the `F` in a closure with no arguments: `|| { /* code */ }`
note: required by a bound in `call_fn`
--> file.rs:1:15
|
1 | fn call_fn<F: Fn() -> ()>(f: &F) {
| ^^^^^^^^^^ required by this bound in `call_fn`
help: consider further restricting this bound
|
5 | fn call_any<F: std::any::Any + Fn()>(f: &F) {
| ++++++
```
Turn remaining non-structural-const-in-pattern lints into hard errors
This completes the implementation of https://github.com/rust-lang/rust/issues/120362 by turning our remaining future-compat lints into hard errors: indirect_structural_match and pointer_structural_match.
They have been future-compat lints for a while (indirect_structural_match for many years, pointer_structural_match since Rust 1.75 (released Dec 28, 2023)), and have shown up in dependency breakage reports since Rust 1.78 (just released on May 2, 2024). I don't expect a lot of code will still depend on them, but we will of course do a crater run.
A lot of cleanup is now possible in const_to_pat, but that is deferred to a later PR.
Fixes https://github.com/rust-lang/rust/issues/70861
There are a few tests that depend on some target features **not** being
enabled by default, and usually they are correct with the default x86-64
target CPU. However, in downstream builds we have modified the default
to fit our distros -- `x86-64-v2` in RHEL 9 and `x86-64-v3` in RHEL 10
-- and the latter especially trips tests that expect not to have AVX.
These cases are few enough that we can just set them back explicitly.
```
error[E0507]: cannot move out of `*x` which is behind a shared reference
--> $DIR/borrowck-fn-in-const-a.rs:6:16
|
LL | return *x
| ^^ move occurs because `*x` has type `String`, which does not implement the `Copy` trait
|
help: consider cloning the value if the performance cost is acceptable
|
LL - return *x
LL + return x.clone()
|
```
This commit does three things:
1. replaces (the last remaining) never true cfgs by the FALSE cfg
2. fix derive-helper-configured.rs (typo in directive)
3. and comment some current unused #[cfg_attr] (missing revisions)
Stabilize associated type bounds (RFC 2289)
This PR stabilizes associated type bounds, which were laid out in [RFC 2289]. This gives us a shorthand to express nested type bounds that would otherwise need to be expressed with nested `impl Trait` or broken into several `where` clauses.
### What are we stabilizing?
We're stabilizing the associated item bounds syntax, which allows us to put bounds in associated type position within other bounds, i.e. `T: Trait<Assoc: Bounds...>`. See [RFC 2289] for motivation.
In all position, the associated type bound syntax expands into a set of two (or more) bounds, and never anything else (see "How does this differ[...]" section for more info).
Associated type bounds are stabilized in four positions:
* **`where` clauses (and APIT)** - This is equivalent to breaking up the bound into two (or more) `where` clauses. For example, `where T: Trait<Assoc: Bound>` is equivalent to `where T: Trait, <T as Trait>::Assoc: Bound`.
* **Supertraits** - Similar to above, `trait CopyIterator: Iterator<Item: Copy> {}`. This is almost equivalent to breaking up the bound into two (or more) `where` clauses; however, the bound on the associated item is implied whenever the trait is used. See #112573/#112629.
* **Associated type item bounds** - This allows constraining the *nested* rigid projections that are associated with a trait's associated types. e.g. `trait Trait { type Assoc: Trait2<Assoc2: Copy>; }`.
* **opaque item bounds (RPIT, TAIT)** - This allows constraining associated types that are associated with the opaque without having to *name* the opaque. For example, `impl Iterator<Item: Copy>` defines an iterator whose item is `Copy` without having to actually name that item bound.
The latter three are not expressible in surface Rust (though for associated type item bounds, this will change in #120752, which I don't believe should block this PR), so this does represent a slight expansion of what can be expressed in trait bounds.
### How does this differ from the RFC?
Compared to the RFC, the current implementation *always* desugars associated type bounds to sets of `ty::Clause`s internally. Specifically, it does *not* introduce a position-dependent desugaring as laid out in [RFC 2289], and in particular:
* It does *not* desugar to anonymous associated items in associated type item bounds.
* It does *not* desugar to nested RPITs in RPIT bounds, nor nested TAITs in TAIT bounds.
This position-dependent desugaring laid out in the RFC existed simply to side-step limitations of the trait solver, which have mostly been fixed in #120584. The desugaring laid out in the RFC also added unnecessary complication to the design of the feature, and introduces its own limitations to, for example:
* Conditionally lowering to nested `impl Trait` in certain positions such as RPIT and TAIT means that we inherit the limitations of RPIT/TAIT, namely lack of support for higher-ranked opaque inference. See this code example: https://github.com/rust-lang/rust/pull/120752#issuecomment-1979412531.
* Introducing anonymous associated types makes traits no longer object safe, since anonymous associated types are not nameable, and all associated types must be named in `dyn` types.
This last point motivates why this PR is *not* stabilizing support for associated type bounds in `dyn` types, e.g, `dyn Assoc<Item: Bound>`. Why? Because `dyn` types need to have *concrete* types for all associated items, this would necessitate a distinct lowering for associated type bounds, which seems both complicated and unnecessary compared to just requiring the user to write `impl Trait` themselves. See #120719.
### Implementation history:
Limited to the significant behavioral changes and fixes and relevant PRs, ping me if I left something out--
* #57428
* #108063
* #110512
* #112629
* #120719
* #120584Closes#52662
[RFC 2289]: https://rust-lang.github.io/rfcs/2289-associated-type-bounds.html
Provide structured suggestion for `#![feature(foo)]`
```
error: `S2<'_>` is forbidden as the type of a const generic parameter
--> $DIR/lifetime-in-const-param.rs:5:23
|
LL | struct S<'a, const N: S2>(&'a ());
| ^^
|
= note: the only supported types are integers, `bool` and `char`
help: add `#![feature(adt_const_params)]` to the crate attributes to enable more complex and user defined types
|
LL + #![feature(adt_const_params)]
|
```
Fix#55941.
never patterns: suggest `!` patterns on non-exhaustive matches
When a match is non-exhaustive we now suggest never patterns whenever it makes sense.
r? ``@compiler-errors``
```
error: `S2<'_>` is forbidden as the type of a const generic parameter
--> $DIR/lifetime-in-const-param.rs:5:23
|
LL | struct S<'a, const N: S2>(&'a ());
| ^^
|
= note: the only supported types are integers, `bool` and `char`
help: add `#![feature(adt_const_params)]` to the crate attributes to enable more complex and user defined types
|
LL + #![feature(adt_const_params)]
|
```
Fix#55941.
Test wasm32-wasip1 in CI, not wasm32-unknown-unknown
This commit changes CI to no longer test the `wasm32-unknown-unknown` target and instead test the `wasm32-wasip1` target. There was some discussion of this in a [Zulip thread], and the motivations for this PR are:
* Runtime failures on `wasm32-unknown-unknown` print nothing, meaning all you get is "something failed". In contrast `wasm32-wasip1` can print to stdout/stderr.
* The unknown-unknown target is missing lots of pieces of libstd, and while `wasm32-wasip1` is also missing some pieces (e.g. threads) it's missing fewer pieces. This means that many more tests can be run.
Overall my hope is to improve the debuggability of wasm failures on CI and ideally be a bit less of a maintenance burden.
This commit specifically removes the testing of `wasm32-unknown-unknown` and replaces it with testing of `wasm32-wasip1`. Along the way there were a number of other archiectural changes made as well, including:
* A new `target.*.runtool` option can now be specified in `config.toml` which is passed as `--runtool` to `compiletest`. This is used to reimplement execution of WebAssembly in a less-wasm-specific fashion.
* The default value for `runtool` is an ambiently located WebAssembly runtime found on the system, if any. I've implemented logic for Wasmtime.
* Existing testing support for `wasm32-unknown-unknown` and Emscripten has been removed. I'm not aware of Emscripten testing being run any time recently and otherwise `wasm32-wasip1` is in theory the focus now.
* I've added a new `//@ needs-threads` directive for `compiletest` and classified a bunch of wasm-ignored tests as needing threads. In theory these tests can run on `wasm32-wasi-preview1-threads`, for example.
* I've tried to audit all existing tests that are either `ignore-emscripten` or `ignore-wasm*`. Many now run on `wasm32-wasip1` due to being able to emit error messages, for example. Many are updated with comments as to why they can't run as well.
* The `compiletest` output matching for `wasm32-wasip1` automatically uses "match a subset" mode implemented in `compiletest`. This is because WebAssembly runtimes often add extra information on failure, such as the `unreachable` instruction in `panic!`, which isn't able to be matched against the golden output from native platforms.
* I've ported most existing `run-make` tests that use custom Node.js wrapper scripts to the new run-make-based-in-Rust infrastructure. To do this I added `wasmparser` as a dependency of `run-make-support` for the various wasm tests to use that parse wasm files. The one test that executed WebAssembly now uses `wasmtime`-the-CLI to execute the test instead. I have not ported over an exception-handling test as Wasmtime doesn't implement this yet.
* I've updated the `test` crate to print out timing information for WASI targets as it can do that (gets a previously ignored test now passing).
* The `test-various` image now builds a WASI sysroot for the WASI target and additionally downloads a fixed release of Wasmtime, currently the latest one at 18.0.2, and uses that for testing.
[Zulip thread]: https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Have.20wasm.20tests.20ever.20caused.20problems.20on.20CI.3F/near/424317944
* The WASI targets deal with the `main` symbol a bit differently than
native so some `codegen` and `assembly` tests have been ignored.
* All `ignore-emscripten` directives have been updated to
`ignore-wasm32` to be more clear that all wasm targets are ignored and
it's not just Emscripten.
* Most `ignore-wasm32-bare` directives are now gone.
* Some ignore directives for wasm were switched to `needs-unwind`
instead.
* Many `ignore-wasm32*` directives are removed as the tests work with
WASI as opposed to `wasm32-unknown-unknown`.
const_eval_select: make it safe but be careful with what we expose on stable for now
As this is all still nightly-only I think `````@rust-lang/wg-const-eval````` can do that without involving t-lang.
r? `````@oli-obk`````
Cc `````@Nilstrieb````` -- the updated version of your RFC would basically say that we can remove these comments about not making behavior differences visible in stable `const fn`
When encountering trait bound errors that satisfy some heuristics that
tell us that the relevant trait for the user comes from the root
obligation and not the current obligation, we use the root predicate for
the main message.
This allows to talk about "X doesn't implement Pattern<'_>" over the
most specific case that just happened to fail, like "char doesn't
implement Fn(&mut char)" in
`tests/ui/traits/suggest-dereferences/root-obligation.rs`
The heuristics are:
- the type of the leaf predicate is (roughly) the same as the type
from the root predicate, as a proxy for "we care about the root"
- the leaf trait and the root trait are different, so as to avoid
talking about `&mut T: Trait` and instead remain talking about
`T: Trait` instead
- the root trait is not `Unsize`, as to avoid talking about it in
`tests/ui/coercion/coerce-issue-49593-box-never.rs`.
```
error[E0277]: the trait bound `&char: Pattern<'_>` is not satisfied
--> $DIR/root-obligation.rs:6:38
|
LL | .filter(|c| "aeiou".contains(c))
| -------- ^ the trait `Fn<(char,)>` is not implemented for `&char`, which is required by `&char: Pattern<'_>`
| |
| required by a bound introduced by this call
|
= note: required for `&char` to implement `FnOnce<(char,)>`
= note: required for `&char` to implement `Pattern<'_>`
note: required by a bound in `core::str::<impl str>::contains`
--> $SRC_DIR/core/src/str/mod.rs:LL:COL
help: consider dereferencing here
|
LL | .filter(|c| "aeiou".contains(*c))
| +
```
Fix#79359, fix#119983, fix#118779, cc #118415 (the suggestion needs
to change).
mark `min_exhaustive_patterns` as complete
This is step 1 and 2 of my [proposal](https://github.com/rust-lang/rust/issues/119612#issuecomment-1918097361) to move `min_exhaustive_patterns` forward. The vast majority of in-tree use cases of `exhaustive_patterns` are covered by `min_exhaustive_patterns`. There are a few cases that still require `exhaustive_patterns` in tests and they're all behind references.
r? ``@ghost``
Cleanup: Fix up some diagnostics
Several diagnostics contained their error code inside their primary message which is no bueno.
This PR moves them out of the message and turns them into structured error codes.
Also fixes another occurrence of `->` after a selector in a Fluent message which is not correct. I've fixed two other instances of this issue in #104345 (2022) but didn't update all instances as I've noted here: https://github.com/rust-lang/rust/pull/104345#issuecomment-1312705977 (“the future is now!”).
This change tweaks the error message generation to actually use the
`#[do_not_recommend]` attribute if present by just skipping the marked
trait impl in favour of the parent impl. It also adds a compile test for
this behaviour. Without this change the test would output the following
error:
```
error[E0277]: the trait bound `&str: Expression` is not satisfied
--> /home/weiznich/Documents/rust/rust/tests/ui/diagnostic_namespace/do_not_recommend.rs:53:15
|
LL | SelectInt.check("bar");
| ^^^^^ the trait `Expression` is not implemented for `&str`, which is required by `&str: AsExpression<Integer>`
|
= help: the following other types implement trait `Expression`:
Bound<T>
SelectInt
note: required for `&str` to implement `AsExpression<Integer>`
--> /home/weiznich/Documents/rust/rust/tests/ui/diagnostic_namespace/do_not_recommend.rs:26:13
|
LL | impl<T, ST> AsExpression<ST> for T
| ^^^^^^^^^^^^^^^^ ^
LL | where
LL | T: Expression<SqlType = ST>,
| ------------------------ unsatisfied trait bound introduced here
```
Note how that mentions `&str: Expression` before and now mentions `&str:
AsExpression<Integer>` instead which is much more helpful for users.
Open points for further changes before stabilization:
* We likely want to move the attribute to the `#[diagnostic]` namespace
to relax the guarantees given?
* How does it interact with the new trait solver?
never patterns: lower never patterns to `Unreachable` in MIR
This lowers a `!` pattern to "goto Unreachable". Ideally I'd like to read from the place to make it clear that the UB is coming from an invalid value, but that's tricky so I'm leaving it for later.
r? `@compiler-errors` how do you feel about a lil bit of MIR lowering
Make `min_exhaustive_patterns` match `exhaustive_patterns` better
Split off from https://github.com/rust-lang/rust/pull/120742.
There remained two edge cases where `min_exhaustive_patterns` wasn't behaving like `exhaustive_patterns`. This fixes them, and tests the feature in a bunch more cases. I essentially went through all uses of `exhaustive_patterns` to see which ones would be interesting to compare between the two features.
r? `@compiler-errors`
make matching on NaN a hard error, and remove the rest of illegal_floating_point_literal_pattern
These arms would never be hit anyway, so the pattern makes little sense. We have had a future-compat lint against float matches in general for a *long* time, so I hope we can get away with immediately making this a hard error.
This is part of implementing https://github.com/rust-lang/rfcs/pull/3535.
Closes https://github.com/rust-lang/rust/issues/41620 by removing the lint.
https://github.com/rust-lang/reference/pull/1456 updates the reference to match.
Improve the diagnostics for unused generic parameters
* Don't emit two errors (namely E0091 *and* E0392) for unused type parameters on *lazy* type aliases
* Fix the diagnostic help message of E0392 for *lazy* type aliases: Don't talk about the “fields” of lazy type aliases (use the term “body” instead) and don't suggest `PhantomData` for them, it doesn't make much sense
* Consolidate the diagnostics for E0091 (unused type parameters in type aliases) and E0392 (unused generic parameters due to bivariance) and make it translatable
* Still keep the error codes distinct (for now)
* Naturally leads to better diagnostics for E0091
r? ```@oli-obk``` (to ballast your review load :P) or compiler
Expand the primary span of E0277 when the immediate unmet bound is not what the user wrote:
```
error[E0277]: the trait bound `i32: Bar` is not satisfied
--> f100.rs:6:6
|
6 | <i32 as Foo>::foo();
| ^^^ the trait `Bar` is not implemented for `i32`, which is required by `i32: Foo`
|
help: this trait has no implementations, consider adding one
--> f100.rs:2:1
|
2 | trait Bar {}
| ^^^^^^^^^
note: required for `i32` to implement `Foo`
--> f100.rs:3:14
|
3 | impl<T: Bar> Foo for T {}
| --- ^^^ ^
| |
| unsatisfied trait bound introduced here
```
Fix#40120.
remove StructuralEq trait
The documentation given for the trait is outdated: *all* function pointers implement `PartialEq` and `Eq` these days. So the `StructuralEq` trait doesn't really seem to have any reason to exist any more.
One side-effect of this PR is that we allow matching on some consts that do not implement `Eq`. However, we already allowed matching on floats and consts containing floats, so this is not new, it is just allowed in more cases now. IMO it makes no sense at all to allow float matching but also sometimes require an `Eq` instance. If we want to require `Eq` we should adjust https://github.com/rust-lang/rust/pull/115893 to check for `Eq`, and rule out float matching for good.
Fixes https://github.com/rust-lang/rust/issues/115881
never_patterns: Count `!` bindings as diverging
A binding that is a never pattern is not reachable, hence counts as diverging code. This allows in particular `fn foo(!: Void) -> SomeType {}` to typecheck.
r? ``@compiler-errors``
Rollup of 10 pull requests
Successful merges:
- #117910 (Refactor uses of `objc_msgSend` to no longer have clashing definitions)
- #118639 (Undeprecate lint `unstable_features` and make use of it in the compiler)
- #119801 (Fix deallocation with wrong allocator in (A)Rc::from_box_in)
- #120058 (bootstrap: improvements for compiler builds)
- #120059 (Make generic const type mismatches not hide trait impls from the trait solver)
- #120097 (Report unreachable subpatterns consistently)
- #120137 (Validate AggregateKind types in MIR)
- #120164 (`maybe_lint_impl_trait`: separate `is_downgradable` from `is_object_safe`)
- #120181 (Allow any `const` expression blocks in `thread_local!`)
- #120218 (rustfmt: Check that a token can begin a nonterminal kind before parsing it as a macro arg)
r? `@ghost`
`@rustbot` modify labels: rollup
Report unreachable subpatterns consistently
We weren't reporting unreachable subpatterns in function arguments and `let` expressions. This wasn't very important, but never patterns make it more relevant: a user might write `let (Ok(x) | Err(!)) = ...` in a case where `let Ok(x) = ...` is accepted, so we should report the `Err(!)` as redundant.
r? ```@compiler-errors```
never_patterns: typecheck never patterns
This checks that a `!` pattern is only used on an uninhabited type (modulo match ergonomics, i.e. `!` is allowed on `&Void`).
r? `@compiler-errors`
Detect `NulInCStr` error earlier.
By making it an `EscapeError` instead of a `LitError`. This makes it like the other errors produced when checking string literals contents, e.g. for invalid escape sequences or bare CR chars.
NOTE: this means these errors are issued earlier, before expansion, which changes behaviour. It will be possible to move the check back to the later point if desired. If that happens, it's likely that all the string literal contents checks will be delayed together.
One nice thing about this: the old approach had some code in `report_lit_error` to calculate the span of the nul char from a range. This code used a hardwired `+2` to account for the `c"` at the start of a C string literal, but this should have changed to a `+3` for raw C string literals to account for the `cr"`, which meant that the caret in `cr"` nul error messages was one short of where it should have been. The new approach doesn't need any of this and avoids the off-by-one error.
r? ```@fee1-dead```
