Use `reachable_as_bitset` to reuse a bitset from the traversal rather
than allocating it seprately. Additionally check if there are any
unreachable blocks before proceeding.
Fixes#76267
When there is a single applicable method candidate, but its trait bounds
are not satisfied, we avoid saying that the method is "not found".
Insted, we update the error message to directly mention which bounds are
not satisfied, rather than mentioning them in a note.
Make weak item traversal deterministic
Fix#81296.
(No test added. The relevant test *is* ui/panic-handler/weak-lang-item.rs, and this change should make it less flaky.)
Refine "remove semicolon" suggestion in trait selection
Don't suggest it if the last statement doesn't have a semicolon
Fixes#81098
See also #54771 for why this suggestion was added
rustc_codegen_ssa: use wall time for codegen_to_LLVM_IR time-passes entry
Use elapsed wall time spent on codegen_to_LLVM_IR for all CGUs as a
whole, rather than the sum for each CGU (the distinction matters for
parallel builds, where some CGUs are processed in parallel).
Enforce that query results implement Debug
Currently, we require that query keys implement `Debug`, but we do not do the same for query values. This can make incremental compilation bugs difficult to debug - there isn't a good place to print out the result loaded from disk.
This PR adds `Debug` bounds to several query-related functions, allowing us to debug-print the query value when an 'unstable fingerprint' error occurs. This required adding `#[derive(Debug)]` to a fairly large number of types - hopefully, this doesn't have much of an impact on compiler bootstrapping times.
Prevent query cycles in the MIR inliner
r? `@eddyb` `@wesleywiser`
cc `@rust-lang/wg-mir-opt`
The general design is that we have a new query that is run on the `validated_mir` instead of on the `optimized_mir`. That query is forced before going into the optimization pipeline, so as to not try to read from a stolen MIR.
The query should not be cached cross crate, as you should never call it for items from other crates. By its very design calls into other crates can never cause query cycles.
This is a pessimistic approach to inlining, since we strictly have more calls in the `validated_mir` than we have in `optimized_mir`, but that's not a problem imo.
Add expected error
Add comment
Tweak comment wording
Fix after rebase to updated master
Fix after rebase to updated master
Distinguish mutation in normal and move closures
Tweak error message
Fix error message for nested closures
Refactor code showing mutated upvar in closure
Remove debug assert
B
Use elapsed wall time spent on codegen_to_LLVM_IR for all CGUs as a
whole, rather than the sum for each CGU (the distinction matters for
parallel builds, where some CGUs are processed in parallel).
Rollup of 14 pull requests
Successful merges:
- #75180 (Implement Error for &(impl Error))
- #78578 (Permit mutable references in all const contexts)
- #79174 (Make std::future a re-export of core::future)
- #79884 (Replace magic numbers with existing constants)
- #80855 (Expand assert!(expr, args..) to include $crate for hygiene on 2021.)
- #80933 (Fix sysroot option not being honored across rustc)
- #81259 (Replace version_check dependency with own version parsing code)
- #81264 (Add unstable option to control doctest run directory)
- #81279 (Small refactor in typeck)
- #81297 (Don't provide backend_optimization_level query for extern crates)
- #81302 (Fix rendering of stabilization version for trait implementors)
- #81310 (Do not mark unit variants as used when in path pattern)
- #81320 (Make bad shlex parsing a pretty error)
- #81338 (Clean up `dominators_given_rpo`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Do not mark unit variants as used when in path pattern
Record that we are processing a pattern so that code responsible for
handling path resolution can correctly decide whether to mark it as
used or not.
Closes#76788.
Small refactor in typeck
- `check_impl_items_against_trait` only queries and walks through associated items once
- extracted function that reports errors
- don't check specialization validity when trait item does not match
- small additional cleanups
Replace version_check dependency with own version parsing code
This gives compiler maintainers a better degree of control
over how the version gets parsed and is a good way to ensure
that there are no changes of behaviour in the future.
Also, issue a warning if the version is invalid instead of erroring
so that we stay forwards compatible with possible future changes
of the versioning scheme.
Last, this improves the present test a little.
Fixes#79436
r? `@petrochenkov`
Fix sysroot option not being honored across rustc
Change link_sanitizer_runtime() to check if the sanitizer library exists in the specified/session sysroot, and if it doesn't exist, use the default sysroot. (See #79253.)
Expand assert!(expr, args..) to include $crate for hygiene on 2021.
This makes `assert!(expr, args..)` properly hygienic in Rust 2021.
This is part of rust-lang/rfcs#3007, see #80162.
Before edition 2021, this was a breaking change, as `std::panic` and `core::panic` are different. In edition 2021 they will be identical, making it possible to apply proper hygiene here.
Target stack-probe support configurable finely
This adds capability to configure the target's stack probe support in a
more precise manner than just on/off. In particular now we allow
choosing between always inline-asm, always call or either one of those
depending on the LLVM version.
Note that this removes the ability to turn off the generation of the
stack-probe attribute. This is valid to replace it with inline-asm for all targets because
`probe-stack="inline-asm"` will not generate any machine code on targets
that do not currently support stack probes. This makes support for stack
probes on targets that don't have any right now automatic with LLVM
upgrades in the future.
(This is valid to do based on the fact that clang unconditionally sets
this attribute when `-fstack-clash-protection` is used, AFAICT)
cc #77885
r? `@cuviper`
Various ABI refactorings
This includes changes to the rust abi and various refactorings that will hopefully make it easier to use the abi handling infrastructure of rustc in cg_clif. There are several refactorings that I haven't done. I am opening this draft PR to check that I haven't broken any non x86_64 architectures.
r? `@ghost`
This gives compiler maintainers a better degree of control
over how the version gets parsed and is a good way to ensure
that there are no changes of behaviour in the future.
Also, issue a warning if the version is invalid instead of erroring
so that we stay forwards compatible with possible future changes
of the versioning scheme.
Last, this improves the present test a little.
Due to macro expansion, its possible to end up with two distinct
`ExpnId`s that have the same `ExpnData` contents. This violates the
contract of `HashStable`, since two unequal `ExpnId`s will end up with
equal `Fingerprint`s.
This commit adds a `disambiguator` field to `ExpnData`, which is used to
force two otherwise-equivalent `ExpnData`s to be distinct.
Fix <unknown> queries and add more timing info to render_html
Closes https://github.com/rust-lang/rust/issues/81251.
## Fix `<unknown>` queries
This happened because `alloc_query_strings` was never called.
## Add more timing info to render_html
This still has some issues I'm not sure how to work out:
- `create_renderer` and `renderer_after_krate` aren't shown by default.
I want something like `verbose_generic_activity_with_arg`, but it doesn't exist.
I'm also not sure how to show activities that aren't on by default - I
tried `-Z self-profile -Z self-profile-args=all`, but it didn't show up.
r? `@wesleywiser`
- Add the module name to `pre_AST_expansion_passes` and don't make it a
verbose event (since it normally doesn't take very long, and it's
emitted many times)
- Don't make the following rustdoc events verbose; they're emitted many times.
+ build_extern_trait_impl
+ build_local_trait_impl
+ build_primitive_trait_impl
+ get_auto_trait_impls
+ get_blanket_trait_impls
- Remove `get_auto_trait_and_blanket_synthetic_impls`; it's wholly
covered by get_{auto,blanket}_trait_impls and not very useful.
This avoids each tool having to separately find and call
`self_profile_alloc_strings`.
- Don't compute the global context if it hasn't yet been computed
This avoids giving extraneous errors about unresolved names if an error
occurs during parsing.
avoid promoting division, modulo and indexing operations that could fail
For division, `x / y` will still be promoted if `y` is a non-zero integer literal; however, `1/(1+1)` will not be promoted any more.
While at it, also see if we can reject promoting floating-point arithmetic (which are [complicated](https://github.com/rust-lang/unsafe-code-guidelines/issues/237) so maybe we should not promote them).
This will need a crater run to see if there's code out there that relies on these things being promoted.
If we can land this, promoteds in `fn`/`const fn` cannot fail to evaluate any more, which should let us do some simplifications in codegen/Miri!
Cc https://github.com/rust-lang/rfcs/pull/3027
Fixes https://github.com/rust-lang/rust/issues/61821
r? `@oli-obk`
Abi::ScalarPair is only ever used for types that don't have a stable
layout anyway so this doesn't break any FFI. It does however reduce the
amount of special casing on the abi outside of the code responsible for
abi specific adjustments to the pass mode.
Improve diagnostics when parsing angle args
https://github.com/rust-lang/rust/pull/79266 introduced parsing of generic arguments in associated type constraints, this however resulted in possibly very confusing error messages in cases in which closing angle brackets were missing such as in `Vec<(u32, _, _) = vec![]`, which outputs an incorrectly parsed equality constraint error, as noted by `@cynecx.`
This PR tries to provide better error messages in such cases.
r? `@petrochenkov`
Refactor token collection to capture trailing token immediately
Split out from https://github.com/rust-lang/rust/pull/80689 - when we start capturing more information about attribute targets, we'll need to know in advance if we're capturing a trailing token or not.
r? `@ghost`
Following traits are now diagnostic items:
- `From` (unchanged)
- `Into`
- `TryFrom`
- `TryInto`
This also adds symbols for those items:
- `into_trait`
- `try_from_trait`
- `try_into_trait`
Gracefully handle loop labels missing leading `'` in different positions
Fix#81192.
* Account for labels when suggesting `loop` instead of `while true`
* Suggest `'a` when given `a` only when appropriate
* Add loop head span to hir
* Tweak error for invalid `break expr`
* Add more misspelled label tests
* Avoid emitting redundant "unused label" lint
* Parse loop labels missing a leading `'`
Each commit can be reviewed in isolation.
Fix formatting for removed lints
- Don't add backticks for the reason a lint was removed. This is almost
never a code block, and when it is the backticks should be in the reason
itself.
- Don't assume clippy is the only tool that needs to be checked for
backwards compatibility
I split this out of https://github.com/rust-lang/rust/pull/80527/ because it kept causing tests to fail, and it's a good change to have anyway.
r? `@flip1995`
When encountering a name `a` that isn't resolved, but a label `'a` is
found in the current ribs, only suggest `'a` if this name is the value
expression of a `break` statement.
Solve FIXME.
Force token collection to run when parsing nonterminals
Fixes#81007
Previously, we would fail to collect tokens in the proper place when
only builtin attributes were present. As a result, we would end up with
attribute tokens in the collected `TokenStream`, leading to duplication
when we attempted to prepend the attributes from the AST node.
We now explicitly track when token collection must be performed due to
nomterminal parsing.
Remove --export-dynamic from the link arguments on the wasm32-wasi
target, as it emits spurious exports and increases code size.
Leave it in place for wasm32-unknown-unknown and
wasm32-unknown-emscripten. Even though it isn't a great solution
there, users are likely depending on its behavior there.
Fix ICE in mir when evaluating SizeOf on unsized type
Not quite ready yet. This tries to fix#80742 as discussed on [Zulip topic][1],
by using `delay_span_bug`.
I don't understand what `delay_span_bug` does. It seems like my error message
is never used. With this patch, in this program:
```rust
#![allow(incomplete_features)]
#![feature(const_evaluatable_checked)]
#![feature(const_generics)]
use std::fmt::Debug;
use std::marker::PhantomData;
use std::mem::size_of;
struct Inline<T>
where
[u8; size_of::<T>() + 1]: ,
{
_phantom: PhantomData<T>,
buf: [u8; size_of::<T>() + 1],
}
impl<T> Inline<T>
where
[u8; size_of::<T>() + 1]: ,
{
pub fn new(val: T) -> Inline<T> {
todo!()
}
}
fn main() {
let dst = Inline::<dyn Debug>::new(0); // line 27
}
```
these errors are printed, both for line 27 (annotated line above):
- "no function or associated item named `new` found for struct `Inline<dyn
Debug>` in the current scope"
- "the size for values of type `dyn Debug` cannot be known at compilation time"
Second error makes sense, but I'm not sure about the first one and why it's
even printed.
Finally, I'm not sure about the span passing in `const_eval`.
[1]: https://rust-lang.zulipchat.com/#narrow/stream/269128-miri/topic/Help.20fixing.20.2380742
Fixes#81007
Previously, we would fail to collect tokens in the proper place when
only builtin attributes were present. As a result, we would end up with
attribute tokens in the collected `TokenStream`, leading to duplication
when we attempted to prepend the attributes from the AST node.
We now explicitly track when token collection must be performed due to
nomterminal parsing.
Change link_sanitizer_runtime() to check if the sanitizer library exists
in the specified/session sysroot, and if it doesn't exist, use the
default sysroot.
Serialize dependency graph directly from DepGraph
Reduce memory usage by serializing dep graph directly from `DepGraph`,
rather than copying it into `SerializedDepGraph` and serializing that.
Fix `unused_unsafe` label with `unsafe_block_in_unsafe_fn
Previously, the following code:
```rust
#![feature(unsafe_block_in_unsafe_fn)]
unsafe fn foo() {
unsafe { unsf() }
}
unsafe fn unsf() {}
```
Would give the following warning:
```
warning: unnecessary `unsafe` block
--> src/lib.rs:4:5
|
4 | unsafe { unsf() }
| ^^^^^^ unnecessary `unsafe` block
|
= note: `#[warn(unused_unsafe)]` on by default
```
which doesn't point out that the block is in an `unsafe fn`.
Tracking issue: #71668
cc #79208
don't suggest erroneous trailing comma after `..`
In #76612, suggestions were added for missing fields in patterns. However, the suggestions are being inserted just at the end
of the last field in the pattern—before any trailing comma after the last field. This resulted in the "if you don't care about missing fields" suggestion to recommend code with a trailing comma after the field ellipsis (`..,`), which is actually not legal ("`..` must be at the end and cannot have a trailing comma")!
Incidentally, the doc-comment on `error_unmentioned_fields` was using `you_cant_use_this_field` as an example field name (presumably copy-paste inherited from the description of Issue #76077), but the present author found this confusing, because unmentioned fields aren't necessarily unusable.
The suggested code in the diff this commit introduces to `destructuring-assignment/struct_destructure_fail.stderr` doesn't work, but it didn't work beforehand, either (because of the "found reserved identifier `_`" thing), so you can't really call it a regression; it could be fixed in a separate PR.
Resolves#78511.
r? `@davidtwco` or `@estebank`
Stability oddity with const intrinsics
cc `@RalfJung`
In https://github.com/rust-lang/rust/pull/80699#discussion_r551495670 `@usbalbin` realized we accepted some intrinsics as `const` without a `#[rustc_const_(un)stable]` attribute. I did some digging, and that example works because intrinsics inherit their stability from their parents... including `#[rustc_const_(un)stable]` attributes. While we may want to fix that (not sure, wasn't there just a MCPed PR that caused this on purpose?), we definitely want tests for it, thus this PR adding tests and some fun tracing statements.
Prevents LateContext::maybe_typeck_results() from returning data in a
nested item without a body. Consequently, LateContext::qpath_res is less
likely to ICE when called in a nested item. Would have prevented
rust-lang/rust-clippy#4545, presumably.
Add track_caller to .steal()
Before:
```
thread 'rustc' panicked at 'attempt to read from stolen value', /home/joshua/rustc/compiler/rustc_data_structures/src/steal.rs:43:15
```
After:
```
thread 'rustc' panicked at 'attempt to steal from stolen value', compiler/rustc_mir/src/transform/mod.rs:423:25
```
r? `@lcnr`
Initialize a few variables directly
Currently they are declared as `mut`, get initialized to a default value, and
then possibly overwritten.
By initializing to the final value directly, they don't need to be `mut` and
it's clear that they don't get mutated elsewhere later on.
Use PlaceRef projection abstractions more consistently in rustc_mir
PlaceRef contains abstractions for dealing with the `projections` array. This PR uses these abstractions more consistently within the `rustc_mir` crate.
See associated issue: rust-lang/rust#80647.
r? `@RalfJung`
- Don't add backticks for the reason a lint was removed. This is almost
never a code block, and when it is the backticks should be in the reason
itself.
- Don't assume clippy is the only tool that needs to be checked for
backwards compatibility
Don't make tools responsible for checking unknown and renamed lints
Previously, clippy (and any other tool emitting lints) had to have their
own separate UNKNOWN_LINTS pass, because the compiler assumed any tool
lint could be valid. Now, as long as any lint starting with the tool
prefix exists, the compiler will warn when an unknown lint is present.
This may interact with the unstable `tool_lint` feature, which I don't entirely understand, but it will take the burden off those external tools to add their own lint pass, which seems like a step in the right direction to me.
- Don't mark `ineffective_unstable_trait_impl` as an internal lint
- Use clippy's more advanced lint suggestions
- Deprecate the `UNKNOWN_CLIPPY_LINTS` pass (and make it a no-op)
- Say 'unknown lint `clippy::x`' instead of 'unknown lint x'
This is tested by existing clippy tests. When https://github.com/rust-lang/rust/pull/80527 merges, it will also be tested in rustdoc tests. AFAIK there is no way to test this with rustc directly.
Before:
```
thread 'rustc' panicked at 'attempt to read from stolen value', /home/joshua/rustc/compiler/rustc_data_structures/src/steal.rs:43:15
```
After:
```
thread 'rustc' panicked at 'attempt to steal from stolen value', compiler/rustc_mir/src/transform/mod.rs:423:25
```
Use Option::unwrap_or instead of open-coding it
r? ```@oli-obk``` Noticed this while we were talking about the other PR just now 😆
```@rustbot``` modify labels +C-cleanup +T-compiler
Force vec![] to expression position only
r? `@oli-obk`
I went with the lazy way of only changing what broke. I moved the test to ui/macros because the diagnostics no longer give suggestions.
Closes#61933
resolve: Simplify collection of traits in scope
"Traits in scope" for a given location are collected by walking all scopes in type namespace, collecting traits in them and pruning traits that don't have an associated item with the given name and namespace.
Previously we tried to prune traits using some kind of hygienic resolution for associated items, but that was complex and likely incorrect, e.g. in #80762 correction to visibilites of trait items caused some traits to not be in scope anymore.
I previously had some comments and concerns about this in https://github.com/rust-lang/rust/pull/65351.
In this PR we are doing some much simpler pruning based on `Symbol` and `Namespace` comparisons, it should be enough to throw away 99.9% of unnecessary traits.
It is not necessary for pruning to be precise because for trait aliases, for example, we don't do any pruning at all, and precise hygienic resolution for associated items needs to be done in typeck anyway.
The somewhat unexpected effect is that trait imports introduced by macros 2.0 now bring traits into scope due to the removed hygienic check on associated item names.
I'm not sure whether it is desirable or not, but I think it's acceptable for now.
The old check was certainly incorrect because macros 2.0 did bring trait aliases into scope.
If doing this is not desirable, then we should come up with some other way to avoid bringing traits from macros 2.0 into scope, that would accommodate for trait aliases as well.
---
The PR also contains a couple of pure refactorings
- Scope walk is done by using `visit_scopes` instead of a hand-rolled version.
- Code is restructured to accomodate for rustdoc that also wants to query traits in scope, but doesn't want to filter them by associated items at all.
r? ```@matthewjasper```
Improve diagnostics when closure doesn't meet trait bound
Improves the diagnostics when closure doesn't meet trait bound by modifying `TypeckResuts::closure_kind_origins` such that `hir::Place` is used instead of `Symbol`. Using `hir::Place` to describe which capture influenced the decision of selecting a trait a closure satisfies to (Fn/FnMut/FnOnce, Copy) allows us to show precise path in the diagnostics when `capture_disjoint_field` feature is enabled.
Closes rust-lang/project-rfc-2229/issues/21
r? ```@nikomatsakis```
resolve: Reject ambiguity built-in attr vs different built-in attr
Fixes https://github.com/rust-lang/rust/issues/79798.
Resolution ensures that inert attributes cannot be used through imports like this, but built-in attributes don't go through initial resolution (only through resolution validation), so we have to keep some extra data (the built-in attribute name) to prevent it from happening.
correctly deal with late-bound lifetimes in anon consts
adds support for using late bound lifetimes of the parent context in anon consts.
```rust
#![feature(const_generics)]
const fn inner<'a>() -> usize where &'a (): Sized { 3 }
fn test<'a>() {
let _: [u8; inner::<'a>()];
}
```
The lifetime `'a` is late bound in `test` so it's not included in its generics but is instead dealt with separately in borrowck.
This didn't previously work for anon consts as they have to use the late bound lifetimes of their parent which has
to be explicitly handled.
r? ```@matthewjasper``` cc ```@varkor``` ```@eddyb```
Currently they are declared as `mut`, get initialized to a default value, and
then possibly overwritten.
By initializing to the final value directly, they don't need to be `mut` and
it's clear that they don't get mutated elsewhere later on.
In #76612, suggestions were added for missing fields in
patterns. However, the suggestions are being inserted just at the end
of the last field in the pattern—before any trailing comma after the
last field. This resulted in the "if you don't care about missing
fields" suggestion to recommend code with a trailing comma after the
field ellipsis (`..,`), which is actually not legal ("`..` must be at
the end and cannot have a trailing comma")!
Incidentally, the doc-comment on `error_unmentioned_fields` was using
`you_cant_use_this_field` as an example field name (presumably
copy-paste inherited from the description of Issue #76077), but
the present author found this confusing, because unmentioned fields
aren't necessarily unusable.
The suggested code in the diff this commit introduces to
`destructuring-assignment/struct_destructure_fail.stderr` doesn't
work, but it didn't work beforehand, either (because of the "found
reserved identifier `_`" thing), so you can't really call it a
regression; it could be fixed in a separate PR.
Resolves#78511.
Rollup of 17 pull requests
Successful merges:
- #78455 (Introduce {Ref, RefMut}::try_map for optional projections in RefCell)
- #80144 (Remove giant badge in README)
- #80614 (Explain why borrows can't be held across yield point in async blocks)
- #80670 (TrustedRandomAaccess specialization composes incorrectly for nested iter::Zips)
- #80681 (Clarify what the effects of a 'logic error' are)
- #80764 (Re-stabilize Weak::as_ptr and friends for unsized T)
- #80901 (Make `x.py --color always` apply to logging too)
- #80902 (Add a regression test for #76281)
- #80941 (Do not suggest invalid code in pattern with loop)
- #80968 (Stabilize the poll_map feature)
- #80971 (Put all feature gate tests under `feature-gates/`)
- #81021 (Remove doctree::Import)
- #81040 (doctest: Reset errors before dropping the parse session)
- #81060 (Add a regression test for #50041)
- #81065 (codegen_cranelift: Fix redundant semicolon warn)
- #81069 (Add sample code for Rc::new_cyclic)
- #81081 (Add test for #34792)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
This copies the unknown_lints code clippy uses for its
unknown_clippy_lints lint to rustc. The unknown_clippy_lints code is
more advanced, because it doesn't suggest renamed or removed lints and
correctly suggest lower casing lints.
implement ptr::write without dedicated intrinsic
This makes `ptr::write` more consistent with `ptr::write_unaligned`, `ptr::read`, `ptr::read_unaligned`, all of which are implemented in terms of `copy_nonoverlapping`.
This means we can also remove `move_val_init` implementations in codegen and Miri, and its special handling in the borrow checker.
Also see [this Zulip discussion](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/ptr.3A.3Aread.20vs.20ptr.3A.3Awrite).
This adds capability to configure the target's stack probe support in a
more precise manner than just on/off. In particular now we allow
choosing between always inline-asm, always call or either one of those
depending on the LLVM version on a per-target basis.
It's not an internal lint:
- It's not in the rustc::internal lint group
- It's on unconditionally, because it actually lints `staged_api`, not
the compiler
This fixes a bug where `#[deny(rustc::internal)]` would warn that
`rustc::internal` was an unknown lint.
Remove DepKind::CrateMetadata and pre-allocation of DepNodes
Remove much of the special-case handling around crate metadata
dependency tracking by replacing `DepKind::CrateMetadata` and the
pre-allocation of corresponding `DepNodes` with on-demand invocation
of the `crate_hash` query.
Previously, clippy (and any other tool emitting lints) had to have their
own separate UNKNOWN_LINTS pass, because the compiler assumed any tool
lint could be valid. Now, as long as any lint starting with the tool
prefix exists, the compiler will warn when an unknown lint is present.
Don't try to add nested predicate to Rustdoc auto-trait `ParamEnv`
Fixes#80233
We already have logic in `evaluate_predicates` that tries to add
unimplemented predicates to our `ParamEnv`. Trying to add a predicate
that already holds can lead to errors later on, since projection
will prefer trait candidates from the `ParamEnv` to predicates from an
impl.
Set tokens on AST node in `collect_tokens`
A new `HasTokens` trait is introduced, which is used to move logic from
the callers of `collect_tokens` into the body of `collect_tokens`.
In addition to reducing duplication, this paves the way for PR #80689,
which needs to perform additional logic during token collection.
Use better ICE message when no MIR is available
The ICE message is somewhat confusing and overly specific - the issue is
that there's no MIR available.
This should make debugging these ICEs easier since the error tells you
what's actually wrong, not what it was trying to do when it failed.
cc https://github.com/rust-lang/rust/pull/80952#issuecomment-759198841
cc `````@jyn514`````
Update tests of "unused_lifetimes" lint for async functions and corresponding source code
Before this PR the following code would cause an error:
```
#![deny(unused_lifetimes)]
async fn f<'a>(_: &'a i32) {}
fn main() {}
```
It was happening because of the desugaring of return type in async functions. As a result of the desugaring, the return type contains all lifetimes involved in the function signature. And these lifetimes were interpreted separately from the same in the function scope => so they are unused.
Now, all lifetimes from the return type are interpreted as used. It is also not perfect, but at least this lint doesn't cause wrong errors now.
This PR connected to issues #78522, #77217
A new `HasTokens` trait is introduced, which is used to move logic from
the callers of `collect_tokens` into the body of `collect_tokens`.
In addition to reducing duplication, this paves the way for PR #80689,
which needs to perform additional logic during token collection.
Properly handle `SyntaxContext` of dummy spans in incr comp
Fixes#80336
Due to macro expansion, we may end up with spans with an invalid
location and non-root `SyntaxContext`. This commits preserves the
`SyntaxContext` of such spans in the incremental cache, and ensures
that we always hash the `SyntaxContext` when computing the `Fingerprint`
of a `Span`
Previously, we would discard the `SyntaxContext` during serialization to
the incremental cache, causing the span's `Fingerprint` to change across
compilation sessions.
Rework diagnostics for wrong number of generic args (fixes#66228 and #71924)
This PR reworks the `wrong number of {} arguments` message, so that it provides more details and contextual hints.
Fixes#80336
Due to macro expansion, we may end up with spans with an invalid
location and non-root `SyntaxContext`. This commits preserves the
`SyntaxContext` of such spans in the incremental cache, and ensures
that we always hash the `SyntaxContext` when computing the `Fingerprint`
of a `Span`
Previously, we would discard the `SyntaxContext` during serialization to
the incremental cache, causing the span's `Fingerprint` to change across
compilation sessions.
Consistently avoid constructing optimized MIR when not doing codegen
The optimized MIR for closures is being encoded unconditionally, while
being unnecessary for cargo check. This turns out to be especially
costly with MIR inlining enabled, since it triggers computation of
optimized MIR for all callees that are being examined for inlining
purposes https://github.com/rust-lang/rust/pull/77307#issuecomment-751915450.
Skip encoding of optimized MIR for closures, enum constructors, struct
constructors, and trait fns when not doing codegen, like it is already
done for other items since 49433.
The ICE message is somewhat confusing and overly specific - the issue is
that there's no MIR available.
This should make debugging these ICEs easier since the error tells you
what's actually wrong, not what it was trying to do when it failed.
cc https://github.com/rust-lang/rust/pull/80952#issuecomment-759198841
For example, this code:
struct S(i32, f32);
let S(x) = S(0, 1.0);
will make the compiler suggest either:
let S(x, _) = S(0, 1.0);
or:
let S(x, ..) = S(0, 1.0);
Fix --pretty=expanded with --remap-path-prefix
Per https://github.com/rust-lang/rust/issues/80832, using
--pretty=expanded and --remap-path-prefix results in an ICE.
This is becasue the session source files table is stored in remapped
form, whereas --pretty-expanded looks up unremapped files. This remaps
the path prefixes before lookup.
~~There don't appear to be any existing tests for --pretty=expanded; I'll look into
adding some.~~ Never mind, found the pretty tests.
Fixes#80832
Added support for i386-unknown-linux-gnu and i486-unknown-linux-gnu
Support for both can be useful when creating new firmware, boot loaders,
or embedded operating systems.
Separate out a `hir::Impl` struct
This makes it possible to pass the `Impl` directly to functions, instead
of having to pass each of the many fields one at a time. It also
simplifies matches in many cases.
See `rustc_save_analysis::dump_visitor::process_impl` or `rustdoc::clean::clean_impl` for a good example of how this makes `impl`s easier to work with.
r? `@petrochenkov` maybe?
This makes it possible to pass the `Impl` directly to functions, instead
of having to pass each of the many fields one at a time. It also
simplifies matches in many cases.
The optimized MIR for closures is being encoded unconditionally, while
being unnecessary for cargo check. This turns out to be especially
costly with MIR inlining enabled, since it triggers computation of
optimized MIR for all callees that are being examined for inlining
purposes.
Skip encoding of optimized MIR for closures, enum constructors, struct
constructors, and trait fns when not doing codegen, like it is already
done for other items since 49433.
Turn type inhabitedness into a query to fix `exhaustive_patterns` perf
We measured in https://github.com/rust-lang/rust/pull/79394 that enabling the [`exhaustive_patterns` feature](https://github.com/rust-lang/rust/issues/51085) causes significant perf degradation. It was conjectured that the culprit is type inhabitedness checking, and [I hypothesized](https://github.com/rust-lang/rust/pull/79394#issuecomment-733861149) that turning this computation into a query would solve most of the problem.
This PR turns `tcx.is_ty_uninhabited_from` into a query, and I measured a 25% perf gain on the benchmark that stress-tests `exhaustiveness_patterns`. This more than compensates for the 30% perf hit I measured [when creating it](https://github.com/rust-lang/rustc-perf/pull/801). We'll have to measure enabling the feature again, but I suspect this fixes the perf regression entirely.
I'd like a perf run on this PR obviously.
I made small atomic commits to help reviewing. The first one is just me discovering the "revisions" feature of the testing framework.
I believe there's a push to move things out of `rustc_middle` because it's huge. I guess `inhabitedness/mod.rs` could be moved out, but it's quite small. `DefIdForest` might be movable somewhere too. I don't know what the policy is for that.
Ping `@camelid` since you were interested in following along
`@rustbot` modify labels: +A-exhaustiveness-checking
Since `DefIdForest` contains 0 or 1 elements the large majority of the
time, by allocating only in the >1 case we avoid almost all allocations,
compared to `Arc<SmallVec<[DefId;1]>>`. This shaves off 0.2% on the
benchmark that stresses uninhabitedness checking.
Remove much of the special-case handling around crate metadata
dependency tracking by replacing `DepKind::CrateMetadata` and the
pre-allocation of corresponding `DepNodes` with on-demand invocation
of the `crate_hash` query.
Make CTFE able to check for UB...
... by not doing any optimizations on the `const fn` MIR used in CTFE. This means we duplicate all `const fn`'s MIR now, once for CTFE, once for runtime. This PR is for checking the perf effect, so we have some data when talking about https://github.com/rust-lang/const-eval/blob/master/rfcs/0000-const-ub.md
To do this, we now have two queries for obtaining mir: `optimized_mir` and `mir_for_ctfe`. It is now illegal to invoke `optimized_mir` to obtain the MIR of a const/static item's initializer, an array length, an inline const expression or an enum discriminant initializer. For `const fn`, both `optimized_mir` and `mir_for_ctfe` work, the former returning the MIR that LLVM should use if the function is called at runtime. Similarly it is illegal to invoke `mir_for_ctfe` on regular functions.
This is all checked via appropriate assertions and I don't think it is easy to get wrong, as there should be no `mir_for_ctfe` calls outside the const evaluator or metadata encoding. Almost all rustc devs should keep using `optimized_mir` (or `instance_mir` for that matter).
Enhance type inference errors involving the `?` operator
This patch adds a special-cased note on type inference errors when the error span points to a `?` return. It also makes the primary label for such errors "cannot infer type of `?` error" in cases where before we would have only said "cannot infer type".
One beneficiary of this change is async blocks, where we can't explicitly annotate the return type and so may not generate any other help (#77880); this lets us at least print the error type we're converting from and anything we know about the type we can't fully infer. More generally, it signposts that an implicit conversion is happening that may have impeded type inference the user was expecting. We already do something similar for [mismatched type errors](2987785df3/src/test/ui/try-block/try-block-bad-type.stderr (L7)).
The check for a relevant `?` operator is built into the existing HIR traversal which looks for places that could be annotated to resolve the error. That means we could identify `?` uses anywhere in the function that output the type we can't infer, but this patch just sticks to adding the note if the primary span given for the error has the operator; if there are other expressions where the type occurs and one of them is selected for the error instead, it's more likely that the `?` operator's implicit conversion isn't the sole cause of the inference failure and that adding an additional diagnostic would just be noise. I added a ui test for one such case.
The data about the `?` conversion is passed around in a `UseDiagnostic` enum that in theory could be used to add more of this kind of note in the future. It was also just easier to pass around than something with a more specific name. There are some follow-up refactoring commits for the code that generates the error label, which was already pretty involved and made a bit more complicated by this change.
Rollup of 8 pull requests
Successful merges:
- #79757 (Replace tabs earlier in diagnostics)
- #80600 (Add `MaybeUninit` method `array_assume_init`)
- #80880 (Move some tests to more reasonable directories)
- #80897 (driver: Use `atty` instead of rolling our own)
- #80898 (Add another test case for #79808)
- #80917 (core/slice: remove doc comment about scoped borrow)
- #80927 (Replace a simple `if let` with the `matches` macro)
- #80930 (fix typo in trait method mutability mismatch help)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
driver: Use `atty` instead of rolling our own
Fixes#80888.
Rationale:
- `atty` is widely used in the Rust ecosystem
- We already use it (in `rustc_errors` and other places)
- We shouldn't be rolling our own TTY detector when there's a
widely-used, well-tested package that we can use
Replace tabs earlier in diagnostics
This replaces tabs earlier in the diagnostics emitting process, which allows various margin calculations to ignore the existence of tabs. It does add a string copy for the source lines that are emitted.
Fixes https://github.com/rust-lang/rust/issues/78438
r? `@estebank`
Serialize incr comp structures to file via fixed-size buffer
Reduce a large memory spike that happens during serialization by writing
the incr comp structures to file by way of a fixed-size buffer, rather
than an unbounded vector.
Effort was made to keep the instruction count close to that of the
previous implementation. However, buffered writing to a file inherently
has more overhead than writing to a vector, because each write may
result in a handleable error. To reduce this overhead, arrangements are
made so that each LEB128-encoded integer can be written to the buffer
with only one capacity and error check. Higher-level optimizations in
which entire composite structures can be written with one capacity and
error check are possible, but would require much more work.
The performance is mostly on par with the previous implementation, with
small to moderate instruction count regressions. The memory reduction is
significant, however, so it seems like a worth-while trade-off.
Rationale:
- `atty` is widely used in the Rust ecosystem
- We already use it (in `rustc_errors` and other places)
- We shouldn't be rolling our own TTY detector when there's a
widely-used, well-tested package that we can use
Suggest async {} for async || {}
Fixes#76011
This adds support for adding help diagnostics to the feature gating checks and
then uses it for the async_closure gate to add the extra bit of help
information as described in the issue.
resolve: Simplify built-in macro table
We don't use full `SyntaxExtension`s from the table, only `SyntaxExtensionKind`s, and `Ident` in `register_builtin_macro` always had dummy span. This PR removes unnecessary data from the table and related function signatures.
Noticed when reviewing #80850.
Explain method-call move errors in loops
PR #73708 added a more detailed explanation of move errors that occur
due to a call to a method that takes `self`. This PR extends that logic
to work when a move error occurs due to a method call in the previous
iteration of a loop.
Split a func into cold/hot parts, reducing binary size
I noticed that the Size::bits function is called in many places,
and is inlined into them. On x86_64-pc-windows-msvc, this function
is inlined 527 times, and compiled separately (non-inlined) 3 times.
Each of those inlined calls contains code that panics. This commit
moves the `panic!` call into a separate function and marks that
function with `#[cold]`.
This reduces binary size by 24 KB. Not much, but it's something.
Changes like this often reduce pressure on instruction-caches,
since it reduces the amount of code that is inlined into hot code
paths. Or more precisely, it removes cold code from hot cache lines.
Use correct ABI for wasm32 by default
Introduces `wasm32-unknown-bindgen` for those wishing to use the bindgen compat abi. `wasm32-*` now uses the correct abi by default.
Fixes https://github.com/rustwasm/team/issues/291
The signed LEB128 decoding function used a hardcoded constant of 64
instead of the number of bits in the type of integer being decoded,
which resulted in incorrect results for some inputs. Fix this, make the
decoding more consistent with the unsigned version, and increase the
LEB128 encoding and decoding test coverage.
Reduce a large memory spike that happens during serialization by writing
the incr comp structures to file by way of a fixed-size buffer, rather
than an unbounded vector.
Effort was made to keep the instruction count close to that of the
previous implementation. However, buffered writing to a file inherently
has more overhead than writing to a vector, because each write may
result in a handleable error. To reduce this overhead, arrangements are
made so that each LEB128-encoded integer can be written to the buffer
with only one capacity and error check. Higher-level optimizations in
which entire composite structures can be written with one capacity and
error check are possible, but would require much more work.
The performance is mostly on par with the previous implementation, with
small to moderate instruction count regressions. The memory reduction is
significant, however, so it seems like a worth-while trade-off.
log-color: Detect TTY based on stderr, not stdout
Fixes#78435 (again).
Logging goes to stderr, not stdout, so we should base our automated
detection on stderr instead of stdout.
Thanks to Ralf Jung for noticing and reporting the bug!
r? `@oli-obk`
cc `@RalfJung`
Add ABI argument to `find_mir_or_eval_fn`
Add ABI argument for called function in `find_mir_or_eval_fn` and
`call_extra_fn`. Useful for comparing with expected ABI in interpreters.
Related to [miri/1631](https://github.com/rust-lang/miri/issues/1631)
r? `@RalfJung`
Use standard formatting for "rust-call" ABI message
Nearly all error messages start with a lowercase letter and don't use
articles - instead they refer to the plural case.
resolve: Scope visiting doesn't need an `Ident`
Resolution scope visitor (`fn visit_scopes`) currently takes an `Ident` parameter, but it doesn't need a full identifier, or even its span, it only needs the `SyntaxContext` part.
The `SyntaxContext` part is necessary because scope visitor has to jump to macro definition sites, so it has to be directed by macro expansion information somehow.
I think it's clearer to pass only the necessary part.
Yes, usually visiting happens as a part of an identifier resolution, but in cases like collecting traits in scope (#80765) or collecting typo suggestions that's not the case.
r? `@matthewjasper`
Logging goes to stderr, not stdout, so we should base our automated
detection on stderr instead of stdout.
Thanks to Ralf Jung for noticing and reporting the bug!
Add ABI argument for called function in `find_mir_or_eval_fn` and
`call_extra_fn`. Useful for comparing with expected ABI in interpreters.
Related to [miri/1631](https://github.com/rust-lang/miri/issues/1631)
Allow #[rustc_builtin_macro = "name"]
This adds the option of specifying the name of a builtin macro in the `#[rustc_builtin_macro]` attribute: `#[rustc_builtin_macro = "name"]`.
This makes it possible to have both `std::panic!` and `core::panic!` as a builtin macro, by using different builtin macro names for each. This is needed to implement the edition-specific behaviour of the panic macros of RFC 3007.
Also removes `SyntaxExtension::is_derive_copy`, as the macro name (e.g. `sym::Copy`) is now tracked and provides that information directly.
r? ``@petrochenkov``
Use correct span for structured suggestion
On structured suggestion for `let` -> `const` and `const` -> `let`, use
a proper `Span` and update tests to check the correct application.
Follow up to #80012.
Improve core::ptr::drop_in_place debuginfo
* Use span of the dropped type as function span when possible.
* Rename symbol from `core::ptr::drop_in_place::$hash` to `{{drop}}::<$TYPE>::$hash`.
Fixes#77465
(I haven't yet updated the tests)
Rustdoc: Fix macros 2.0 and built-in derives being shown at the wrong path
Fixes#74355
- ~~waiting on author + draft PR since my code ought to be cleaned up _w.r.t._ the way I avoid the `.unwrap()`s:~~
- ~~dummy items may avoid the first `?`,~~
- ~~but within the module traversal some tests did fail (hence the second `?`), meaning the crate did not possess the exact path of the containing module (`extern` / `impl` blocks maybe? I'll look into that).~~
r? `@jyn514`
Per https://github.com/rust-lang/rust/issues/80832, using
--pretty=expanded and --remap-path-prefix results in an ICE.
This is becasue the session source files table is stored in remapped
form, whereas --pretty-expanded looks up unremapped files. This remaps
the path prefixes before lookup.
Don't mark `force_query_with_job` as `inline(always)`
It's rather large, and using `inline(always)` forces it to be recompiled
in each calling crate. Hopefully this change will help with #65031. I intentionally only removed inline from `force_query_with_job` because the other functions are tiny and I wanted to measure this change on its own.
This may conflict with https://github.com/rust-lang/rust/issues/78780. I am not sure if it will hurt or help.
cc `@cjgillot`
Before 2021, this was a breaking change, as std::panic and core::panic
are different. In edition 2021 they will be identical, making it
possible again to apply proper hygiene here.
Use an empty `TokenCursorFrame` stack when capturing tokens
We will never need to pop past our starting frame during token
capturing. Using an empty stack allows us to avoid pointless heap
allocations/deallocations.
This makes it possible to have both std::panic and core::panic as a
builtin macro, by using different builtin macro names for each.
Also removes SyntaxExtension::is_derive_copy, as the macro name (e.g.
sym::Copy) is now tracked and provides that information directly.
Make target-cpu=native detect individual features
This PR makes target-cpu=native check for and enable/disable individual features instead of detecting and targeting a CPU by name. This brings the flag's behavior more in line with clang and gcc and ensures that the host actually supports each feature that we are compiling for.
This should resolve issues with miscompilations on e.g. "Haswell" Pentiums and Celerons that lack support for AVX, and also enable support for `aes` on Broadwell processors that support it. It should also resolve issues with failing to detect feature support in newer CPUs that aren't yet known by LLVM (see: #80633).
Fixes#54688Fixes#48464Fixes#38218
We will never need to pop past our starting frame during token
capturing. Using an empty stack allows us to avoid pointless heap
allocations/deallocations.
PR #73708 added a more detailed explanation of move errors that occur
due to a call to a method that takes `self`. This PR extends that logic
to work when a move error occurs due to a method call in the previous
iteration of a loop.
Access query (DepKind) metadata through fields
This refactors the access to query definition metadata (attributes such as eval always, anon, has_params) and loading/forcing functions to generate a number of structs, instead of matching on the DepKind enum. This makes access to the fields cheaper to compile. Using a struct means that finding the metadata for a given query is just an offset away; previously the match may have been compiled to a jump table but likely not completely inlined as we expect here.
A previous attempt explored a similar strategy, but using trait objects in #78314 that proved less effective, likely due to higher overheads due to forcing dynamic calls and poorer cache utilization (all metadata is fairly densely packed with this PR).
Optimize away some `fs::metadata` calls.
This also eliminates a use of a `Path` convenience function, in support
of #80741, refactoring `std::path` to focus on pure data structures and
algorithms.
Make sure rust-call errors occur correctly for traits
Fixes#79669
Adds trait method resolution to the error, and adds UI tests to ensure it doesn't happen again. Opening as draft because I'm getting weird link errors from unrelated code on my machine, and want to see what CI thinks.
On structured suggestion for `let` -> `const` and `const` -> `let`, use
a proper `Span` and update tests to check the correct application.
Follow up to #80012.
rustc_parse: Better spans for synthesized token streams
I think using the nonterminal span for synthesizing its tokens is a better approximation than using `DUMMY_SP` or the attribute span like #79472 did in `expand.rs`.
r? `@Aaron1011`
MIR Inline is incompatible with coverage
Fixes: #80060
Fixed by disabling inlining if `-Zinstrument-coverage` is set.
The PR also adds additional use cases to the coverage test for doctests.
r? `@wesleywiser`
cc: `@tmandry`
