Add target support for RTEMS Arm
# `armv7-rtems-eabihf`
This PR adds a new target for the RTEMS RTOS. To get things started it focuses on Xilinx/AMD Zynq-based targets, but in theory it should also support other armv7-based board support packages in the future.
Given that RTEMS has support for many POSIX functions it is mostly enabling corresponding unix features for the new target.
I also previously started a PR in libc (https://github.com/rust-lang/libc/pull/3561) to add the needed OS specific C-bindings and was told that a PR in this repo is needed first. I will update the PR to the newest version after approval here.
I will probably also need to change one line in the backtrace repo.
Current status is that I could compile rustc for the new target locally (with the updated libc and backtrace) and could compile binaries, link, and execute a simple "Hello World" RTEMS application for the target hardware.
> A proposed target or target-specific patch that substantially changes code shared with other targets (not just target-specific code) must be reviewed and approved by the appropriate team for that shared code before acceptance.
There should be no breaking changes for existing targets. Main changes are adding corresponding `cfg` switches for the RTEMS OS and adding the C binding in libc.
# Tier 3 target policy
> - A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
I will do the maintenance (for now) further members of the RTEMS community will most likely join once the first steps have been done.
> - Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
> - Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
> - If possible, use only letters, numbers, dashes and underscores for the name. Periods (`.`) are known to cause issues in Cargo.
The proposed triple is `armv7-rtems-eabihf`
> - Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
> - The target must not introduce license incompatibilities.
> - Anything added to the Rust repository must be under the standard Rust license (`MIT OR Apache-2.0`).
> - The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the `tidy` tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
> - Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, `rustc` built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
> - "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are _not_ limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
The tools consists of the cross-compiler toolchain (gcc-based). The RTEMS kernel (BSD license) and parts of the driver stack of FreeBSD (BSD license). All tools are FOSS and publicly available here: https://gitlab.rtems.org/rtems
There are also no new features or dependencies introduced to the Rust code.
> - Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
N/A to me. I am not a reviewer nor Rust team member.
> - Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (`core` for most targets, `alloc` for targets that can support dynamic memory allocation, `std` for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
`core` and `std` compile. Some advanced features of the `std` lib might not work yet. However, the goal of this tier 3 target it to make it easier for other people to build and run test applications to better identify the unsupported features and work towards enabling them.
> - The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
Building is described in platform support doc. Running simple unit tests works. Running the test suite of the stdlib is currently not that easy. Trying to work towards that after the this target has been added to the nightly.
> - Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via ````@`)``` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
Understood.
> - Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
Ok
> - Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> - In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
I think, I didn't add any breaking changes for any existing targets (see the comment regarding features above).
> - Tier 3 targets must be able to produce assembly using at least one of rustc's supported backends from any host target.
Can produce assembly code via the llvm backend (tested on Linux).
>
> If a tier 3 target stops meeting these requirements, or the target maintainers no longer have interest or time, or the target shows no signs of activity and has not built for some time, or removing the target would improve the quality of the Rust codebase, we may post a PR to remove it; any such PR will be CCed to the target maintainers (and potentially other people who have previously worked on the target), to check potential interest in improving the situation.GIAt this tier, the Rust project provides no official support for a target, so we place minimal requirements on the introduction of targets.
Understood.
r? compiler-team
enable -Zrandomize-layout in debug CI builds
This builds rustc/libs/tools with `-Zrandomize-layout` on *-debug CI runners.
Only a handful of tests and asserts break with that enabled, which is promising. One test was fixable, the rest is dealt with by disabling them through new cargo features or compiletest directives.
The config.toml flag `rust.randomize-layout` defaults to false, so it has to be explicitly enabled for now.
Rollup of 9 pull requests
Successful merges:
- #127692 (Suggest `impl Trait` for References to Bare Trait in Function Header)
- #128701 (Don't Suggest Labeling `const` and `unsafe` Blocks )
- #128934 (Non-exhaustive structs may be empty)
- #129630 (Document the broken C ABI of `wasm32-unknown-unknown`)
- #129863 (update comment regarding TargetOptions.features)
- #129896 (do not attempt to prove unknowable goals)
- #129926 (Move `SanityCheck` and `MirPass`)
- #129928 (rustc_driver_impl: remove some old dead logic)
- #129930 (include 1.80.1 release notes on master)
r? `@ghost`
`@rustbot` modify labels: rollup
rustc_driver_impl: remove some old dead logic
This got added in 5013952e4a, before `cfg(target_feature)` was stable. It should not be needed any more ever since `cfg(target_feature)` is stable.
Move `SanityCheck` and `MirPass`
They are currently in `rustc_middle`. This PR moves them to `rustc_mir_transform`, which makes more sense.
r? ``@cjgillot``
do not attempt to prove unknowable goals
In case a goal is unknowable, we previously still checked all other possible ways to prove this goal, even though its final result is already guaranteed to be ambiguous. By ignoring all other candidates in that case we can avoid a lot of unnecessary work, fixing the performance regression in typenum found in #121848.
This is already the behavior in the old solver. This could in theory cause future-compatability issues as considering fewer goals unknowable may end up causing performance regressions/hangs. I am quite confident that this will not be an issue.
r? ``@compiler-errors``
update comment regarding TargetOptions.features
The claim that `-Ctarget-features` cannot disable these features set in the target spec is definitely wrong -- I tried it for `x86_64-pc-windows-gnu`, which enables SSE3 that way. Building with `-Ctarget-feature=-sse3` works fine, and `cfg!(target_feature = "sse3")` is `false` in that build.
There are also some indications that these are actually intended to be overwritten:
3b14526cea/compiler/rustc_target/src/spec/targets/i686_unknown_uefi.rs (L22-L23)84ac80f192/compiler/rustc_target/src/spec/targets/x86_64h_apple_darwin.rs (L18-L23)
So... let's update the comment to match reality, I guess?
The claim that they overwrite `-Ctarget-cpu` is based on
- for `native`, the comment in the apple target spec quoted above
- for other CPU strings, the assumption that `LLVMRustCreateTargetMachine` will apply these features after doing whatever the base CPU model does. I am not sure how to check that, I hope some LLVM backend people can chime in. :)
Document the broken C ABI of `wasm32-unknown-unknown`
Inspired by discussion on
https://github.com/rust-lang/rust/issues/129486 this is intended to at least document the current state of the world in a more public location than throughout a series of issues.
Non-exhaustive structs may be empty
This is a follow-up to a discrepancy noticed in https://github.com/rust-lang/rust/pull/122792: today, the following struct is considered inhabited (non-empty) outside its defining crate:
```rust
#[non_exhaustive]
pub struct UninhabitedStruct {
pub never: !,
// other fields
}
```
`#[non_exhaustive]` on a struct should mean that adding fields to it isn't a breaking change. There is no way that adding fields to this struct could make it non-empty since the `never` field must stay and is inconstructible. I suspect this was implemented this way due to confusion with `#[non_exhaustive]` enums, which indeed should be considered non-empty outside their defining crate.
I propose that we consider such a struct uninhabited (empty), just like it would be without the `#[non_exhaustive]` annotation.
Code that doesn't pass today and will pass after this:
```rust
// In a different crate
fn empty_match_on_empty_struct<T>(x: UninhabitedStruct) -> T {
match x {}
}
```
This is not a breaking change.
r? ``@compiler-errors``
Don't Suggest Labeling `const` and `unsafe` Blocks
Fixes#128604
Previously, both anonymous constant blocks (E.g. The labeled block
inside `['_'; 'block: { break 'block 1 + 2; }]`) and inline const
blocks (E.g. `const { ... }`) were considered to be the same
kind of blocks. This caused the compiler to incorrectly suggest
labeling both the blocks when only anonymous constant blocks can be
labeled.
This PR adds an other enum variant to `Context` so that both the
blocks can be handled appropriately.
Also, adds some doc comments and removes unnecessary `&mut` in a
couple of places.
Suggest `impl Trait` for References to Bare Trait in Function Header
Fixes#125139
This PR suggests `impl Trait` when `&Trait` is found as a function parameter type or return type. This makes use of existing diagnostics by adding `peel_refs()` when checking for type equality.
Additionaly, it makes a few other improvements:
1. Checks if functions inside impl blocks have bare trait in their headers.
2. Introduces a trait `NextLifetimeParamName` similar to the existing `NextTypeParamName` for suggesting a lifetime name. Also, abstracts out the common logic between the two trait impls.
### Related Issues
I ran into a bunch of related diagnostic issues but couldn't fix them within the scope of this PR. So, I have created the following issues:
1. [Misleading Suggestion when Returning a Reference to a Bare Trait from a Function](https://github.com/rust-lang/rust/issues/127689)
2. [Verbose Error When a Function Takes a Bare Trait as Parameter](https://github.com/rust-lang/rust/issues/127690)
3. [Incorrect Suggestion when Returning a Bare Trait from a Function](https://github.com/rust-lang/rust/issues/127691)
r? ```@estebank``` since you implemented #119148
Because that's now the only crate that uses it.
Moving stuff out of `rustc_middle` is always welcome.
I chose to use `impl crate::MirPass`/`impl crate::MirLint` (with
explicit `crate::`) everywhere because that's the only mention of
`MirPass`/`MirLint` used in all of these files. (Prior to this change,
`MirPass` was mostly imported via `use rustc_middle::mir::*` items.)
Rollup of 8 pull requests
Successful merges:
- #129152 (custom/external clippy support for bootstrapping)
- #129311 (don't copy `.rustc-dev-contents` from CI rustc)
- #129800 (Move the Windows remove_dir_all impl into a module and make it more race resistant)
- #129860 (update `object` dependency to remove duplicate `wasmparser`)
- #129885 (chore: remove repetitive words)
- #129913 (Add missing read_buf stub for x86_64-unknown-l4re-uclibc)
- #129916 (process.rs: remove "Basic usage" text where not useful)
- #129917 (Fix parsing of beta version in dry-run mode)
r? `@ghost`
`@rustbot` modify labels: rollup
The actual implementation remains in `rustc_mir_dataflow`, but this
commit moves the `MirPass` impl to `rustc_mir_transform` and changes it
to a `MirLint` (fixing a `FIXME` comment).
(I originally tried moving the full implementation from
`rustc_mir_dataflow` but I had some trait problems with `HasMoveData`
and `RustcPeekAt` and `MaybeLiveLocals`. This commit was much smaller
and simpler, but still will allow some follow-up cleanups.)
Add missing read_buf stub for x86_64-unknown-l4re-uclibc
Before this PR, `x check library/std --target x86_64-unknown-l4re-uclibc` will fail with
```
error[E0599]: no method named `read_buf` found for struct `Socket` in the current scope
--> std/src/os/unix/net/stream.rs:598:16
|
598 | self.0.read_buf(buf)
| ^^^^^^^^
|
::: std/src/sys/pal/unix/l4re.rs:23:5
|
23 | pub struct Socket(FileDesc);
| ----------------- method `read_buf` not found for this struct
|
= help: items from traits can only be used if the trait is implemented and in scope
```
This target doesn't have a maintainer to cc.
update `object` dependency to remove duplicate `wasmparser`
``@alexcrichton`` in #129762 you bumped a few wasm-related dependencies and tried to avoid duplicates.
If I understand correctly, `object` 0.36.4 wasn't yet released at the time, and therefore #129762 ended up duplicating `wasmparser`. Now that the release happened, we can remove the duplicate.
r? ``@alexcrichton``
Move the Windows remove_dir_all impl into a module and make it more race resistant
This attempts to make the Windows implementation of `remove_dir_all` easier to understand and work with by separating out different concerns into their own functions. The code is mostly the same as before just moved around. There are some changes to make it more robust against races (e.g. two calls to `remove_dir_all` running concurrently). The module level comment explains the issue.
try-job: x86_64-msvc
try-job: i686-msvc
custom/external clippy support for bootstrapping
Similar to cargo, rustc, and rustfmt, this adds the support of using custom clippy on bootstrap. It’s designed for those who want to test their own clippy builds or avoid downloading the stage0 clippy.
Closes#121518
