The `std::os::unix` module is stubbed out when building docs for these
target platforms. The introduction of Linux-specific extension traits
caused `std::os::net` to depend on sub-modules of `std::os::unix`,
which broke rustdoc for the `wasm32-unknown-unknown` target.
Adding an additional `#[cfg]` guard solves that rustdoc failure by
not declaring `linux_ext` on targets with a stubbed `std::os::unix`.
Update `rand` in the stdlib tests, and remove the `getrandom` feature from it.
The main goal is actually removing `getrandom`, so that eventually we can allow running the stdlib test suite on tier3 targets which don't have `getrandom` support. Currently those targets can only run the subset of stdlib tests that exist in uitests, and (generally speaking), we prefer not to test libstd functionality in uitests, which came up recently in https://github.com/rust-lang/rust/pull/104095 and https://github.com/rust-lang/rust/pull/104185. Additionally, the fact that we can't update `rand`/`getrandom` means we're stuck with the old set of tier3 targets, so can't test new ones.
~~Anyway, I haven't checked that this actually does allow use on tier3 targets (I think it does not, as some work is needed in stdlib submodules) but it moves us slightly closer to this, and seems to allow at least finally updating our `rand` dep, which definitely improves the status quo.~~ Checked and works now.
For the most part, our tests and benchmarks are fine using hard-coded seeds. A couple tests seem to fail with this (stuff manipulating the environment expecting no collisions, for example), or become pointless (all inputs to a function become equivalent). In these cases I've done a (gross) dance (ab)using `RandomState` and `Location::caller()` for some extra "entropy".
Trying to share that code seems *way* more painful than it's worth given that the duplication is a 7-line function, even if the lines are quite gross. (Keeping in mind that sharing it would require adding `rand` as a non-dev dep to std, and exposing a type from it publicly, all of which sounds truly awful, even if done behind a perma-unstable feature).
See also some previous attempts:
- https://github.com/rust-lang/rust/pull/86963 (in particular https://github.com/rust-lang/rust/pull/86963#issuecomment-885438936 which explains why this is non-trivial)
- https://github.com/rust-lang/rust/pull/89131
- https://github.com/rust-lang/rust/pull/96626#issuecomment-1114562857 (I tried in that PR at the same time, but settled for just removing the usage of `thread_rng()` from the benchmarks, since that was the main goal).
- https://github.com/rust-lang/rust/pull/104185
- Probably more. It's very tempting of a thing to "just update".
r? `@Mark-Simulacrum`
default OOM handler: use non-unwinding panic, to match std handler
The OOM handler in std will by default abort. This adjusts the default in liballoc to do the same, using the `can_unwind` flag on the panic info to indicate a non-unwinding panic.
In practice this probably makes little difference since the liballoc default will only come into play in no-std situations where people write a custom panic handler, which most likely will not implement unwinding. But still, this seems more consistent.
Cc `@rust-lang/wg-allocators,` https://github.com/rust-lang/rust/issues/66741
Add notes and examples about non-intuitive `PathBuf::set_extension` behavior
Basically, passing the empty string will actually remove the extension instead of setting it to the empty string. This might change what is considered to be an extension. Additionally, passing an extension that contains dots will make the path only consider the last part of it to be the new extension.
Unify id-based thread parking implementations
Multiple platforms currently use thread-id-based parking implementations (NetBSD and SGX[^1]). Even though the strategy does not differ, these are duplicated for each platform, as the id is encoded into an atomic thread variable in different ways for each platform.
Since `park` is only called by one thread, it is possible to move the thread id into a separate field. By ensuring that the field is only written to once, before any other threads access it, these accesses can be unsynchronized, removing any restrictions on the size and niches of the thread id.
This PR also renames the internal `thread_parker` modules to `thread_parking`, as that name now better reflects their contents. I hope this does not add too much reviewing noise.
r? `@m-ou-se`
`@rustbot` label +T-libs
[^1]: SOLID supports this as well, I will switch it over in a follow-up PR.
Basically, passing the empty string will actually remove the extension
instead of setting it to the empty string. This might change what is
considered to be an extension. Additionally, passing an extension that
contains dots will make the path only consider the last part of it to be
the new extension.
Add #[inline] markers to once_cell methods
Added inline markers to all simple methods under the `once_cell` feature. Relates to #74465 and #105587
This should not block #105587
`IN6ADDR_ANY_INIT` and `IN6ADDR_LOOPBACK_INIT` documentation.
Added documentation for IPv6 Addresses `IN6ADDR_ANY_INIT` also known as `in6addr_any` and `IN6ADDR_LOOPBACK_INIT` also known as `in6addr_loopback` similar to `INADDR_ANY` for IPv4 Addresses.
Catch panics/unwinding in destruction of TLS values
`destroy_value` is/can be called from C code (libc). Unwinding from Rust to C code is undefined behavior, which is why unwinding is caught here.
This problem caused an infinite loop inside the unwinding code when running `src/test/ui/threads-sendsync/issue-24313.rs` on a tier 3 target (QNX/Neutrino) on aarch64.
See also https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/Infinite.20unwinding.20bug.
kmc-solid: Fix memory ordering in thread operations
Fixes two memory ordering issues in the thread state machine (`ThreadInner::lifecycle`) of the [`*-kmc-solid_*`](https://doc.rust-lang.org/nightly/rustc/platform-support/kmc-solid.html) Tier 3 targets.
1. When detaching a thread that is still running (i.e., the owner updates `lifecycle` first, and the child updates it next), the first update did not synchronize-with the second update, resulting in a data race between the first update and the deallocation of `ThreadInner` by the child thread.
2. When joining on a thread, the joiner has to pass its own task ID to the joinee in order to be woken up later, but in doing so, it did not synchronize-with the read operation, creating possible sequences of execution where the joinee wakes up an incorrect or non-existent task.
Both issue are theoretical and most likely have never manifested in practice because of the stronger guarantees provided by the Arm memory model (particularly due to its barrier-based definition). Compiler optimizations could have subverted this, but the inspection of compiled code did not reveal such optimizations taking place.
Bump master bootstrap compiler
This PR bumps the bootstrap compiler to the beta created earlier this week, cherry-picks the stabilization version number updates, and updates the `cfg(bootstrap)`s.
r? `@Mark-Simulacrum`
adjust message on non-unwinding panic
"thread panicked while panicking" is just plain wrong in case this is a non-unwinding panic, such as
- a panic out of a `nounwind` function
- the sanity checks we have in `mem::uninitialized` and `mem::zeroed`
- the optional debug assertion in various unsafe std library functions
Clarify `catch_unwind` docs about panic hooks
Makes it clear from `catch_unwind` docs that the panic hook will be called before the panic is caught.
Fixes#105432
Make sentinel value configurable in `library/std/src/sys_common/thread_local_key.rs`
This is an excerpt of a changeset for the QNX/Neutrino OS. To make the patch for QNX smaller and easier to review, I've extracted this change (which is OS independent). I would be surprised if no other OS is also affected.
All this patch does is to define a `const` for a sentinel value instead of using it directly at several places.
There are OSs that always return the lowest free value. The algorithm in `lazy_init` always avoids keys with the sentinel value.
In affected OSs, this means that each call to `lazy_init` will always request two keys from the OS and returns/frees the first one (with sentinel value) immediately afterwards.
By making the sentinel value configurable, affected OSs can use a different value than zero to prevent this performance issue.
On QNX/Neutrino, it is planned to use a different sentinel value:
```rust
// Define a sentinel value that is unlikely to be returned
// as a TLS key (but it may be returned).
#[cfg(not(target_os = "nto"))]
const KEY_SENTVAL: usize = 0;
// On QNX/Neutrino, 0 is always returned when currently not in use.
// Using 0 would mean to always create two keys and remote the first
// one (with value of 0) immediately afterwards.
#[cfg(target_os = "nto")]
const KEY_SENTVAL: usize = libc::PTHREAD_KEYS_MAX + 1;
```
It seems like no other OS defines `PTHREAD_KEYS_MAX` in Rusts libc, but `limits.h` on unix systems does.
available_parallelism: Gracefully handle zero value cfs_period_us
There seem to be some scenarios where the cgroup cpu quota field `cpu.cfs_period_us` can contain `0`. This field is used to determine the "amount" of parallelism suggested by the function `std:🧵:available_parallelism`
A zero value of this field cause a panic when `available_parallelism()` is invoked. This issue was detected by the call from binaries built by `cargo test`. I really don't feel like `0` is a good value for `cpu.cfs_period_us`, but I also don't think applications should panic if this value is seen.
This panic started happening with rust 1.64.0.
This case is gracefully handled by other projects which read this information: [num_cpus](e437b9d908/src/linux.rs (L207-L210)), [ninja](https://github.com/ninja-build/ninja/pull/2174/files), [dotnet](c4341d45ac/src/coreclr/pal/src/misc/cgroup.cpp (L481-L483))
Before this change, running `cargo test` in environments configured as described above would trigger this panic:
```
$ RUST_BACKTRACE=1 cargo test
Finished test [unoptimized + debuginfo] target(s) in 3.55s
Running unittests src/main.rs (target/debug/deps/x-9a42e145aca2934d)
thread 'main' panicked at 'attempt to divide by zero', library/std/src/sys/unix/thread.rs:546:70
stack backtrace:
0: rust_begin_unwind
1: core::panicking::panic_fmt
2: core::panicking::panic
3: std::sys::unix:🧵:cgroups::quota
4: std::sys::unix:🧵:available_parallelism
5: std:🧵:available_parallelism
6: test::helpers::concurrency::get_concurrency
7: test::console::run_tests_console
8: test::test_main
9: test::test_main_static
10: x::main
at ./src/main.rs:1:1
11: core::ops::function::FnOnce::call_once
at /tmp/rust-1.64-1.64.0-1/library/core/src/ops/function.rs:248:5
note: Some details are omitted, run with `RUST_BACKTRACE=full` for a verbose backtrace.
error: test failed, to rerun pass '--bin x'
```
I've tested this change in an environment which has the bad (questionable?) setup and rebuilding the test executable against a fixed std library fixes the panic.
Move `ReentrantMutex` to `std::sync`
If I understand #84187 correctly, `sys_common` should not contain platform-independent code, even if it is private.
Fix backoff doc to match implementation
The commit 8dddb22943 in the crossbeam-channel PR (#93563) changed the backoff strategy to be quadratic instead of exponential. This updates the doc to prevent confusion.
Use correct clock in `park_timeout` on Horizon
Horizon does not support using `CLOCK_MONOTONIC` with condition variables, so use the system time instead.
More inference-friendly API for lazy
The signature for new was
```
fn new<F>(f: F) -> Lazy<T, F>
```
Notably, with `F` unconstrained, `T` can be literally anything, and just `let _ = Lazy::new(|| 92)` would not typecheck.
This historiacally was a necessity -- `new` is a `const` function, it couldn't have any bounds. Today though, we can move `new` under the `F: FnOnce() -> T` bound, which gives the compiler enough data to infer the type of T from closure.
Some C commandline parsers (e.g. GLib and Qt) are replacing already
handled arguments in `argv` with `NULL` and move them to the end. That
means that `argc` might be bigger than the actual number of non-`NULL`
pointers in `argv` at this point.
To handle this we simply stop iterating at the first `NULL` argument.
`argv` is also guaranteed to be `NULL`-terminated so any non-`NULL`
arguments after the first `NULL` can safely be ignored.
Fixes https://github.com/rust-lang/rust/issues/105999
Realistic `Path::as_mut_os_str` doctest
With "Implement DerefMut for PathBuf" (#105018) now merged, it's
possible to exercise `Path::as_mut_os_str` (#105002) without going
through `into_boxed_path`.
Use a more efficient `Once` on platforms without threads
The current implementation uses an atomic queue and spins rather than panicking when calling `call_once` recursively. Since concurrency is not supported on platforms like WASM, `Once` can be implemented much more efficiently using just a single non-atomic state variable.
fs: Fix#50619 (again) and add a regression test
Bug #50619 was fixed by adding an end_of_stream flag in #50630.
Unfortunately, that fix only applied to the readdir_r() path. When I
switched Linux to use readdir() in #92778, I inadvertently reintroduced
the bug on that platform. Other platforms that had always used
readdir() were presumably never fixed.
This patch enables end_of_stream for all platforms, and adds a
Linux-specific regression test that should hopefully prevent the bug
from being reintroduced again.
Allow blocking `Command::output`
### Problem
Currently, `Command::output` is internally implemented using `Command::spawn`. This is problematic because some targets (like UEFI) do not actually support multitasking and thus block while the program is executing. This coupling does not make much sense as `Command::output` is supposed to block until the execution is complete anyway and thus does not need to rely on a non-blocking `Child` or any other intermediate.
### Solution
This PR moves the implementation of `Command::output` to `std::sys`. This means targets can choose to implement only `Command::output` without having to implement `Command::spawn`.
### Additional Information
This was originally conceived when working on https://github.com/rust-lang/rust/pull/100316. Currently, the only target I know about that will benefit from this change is UEFI.
This PR can also be used to implement more efficient `Command::output` since the intermediate `Process` is not actually needed anymore, but that is outside the scope of this PR.
Since this is not a public API change, I'm not sure if an RFC is needed or not.
Implement DerefMut for PathBuf
Without this, there's no way to get a `&mut Path` from `PathBuf` without
going through `into_boxed_path`. This is relevant now that #105002 adds
`PathBuf::as_mut_os_string` and `Path::as_mut_os_str`.
Use more LFS functions.
On Linux, use mmap64, open64, openat64, and sendfile64 in place of their non-LFS counterparts.
This is relevant to #94173.
With these changes (together with rust-lang/backtrace-rs#501), the simple binaries I produce with rustc seem to have no non-LFS functions, so maybe #94173 is fixed. But I can't be sure if I've missed something and maybe some non-LFS functions could sneak in somehow.
Bug #50619 was fixed by adding an end_of_stream flag in #50630.
Unfortunately, that fix only applied to the readdir_r() path. When I
switched Linux to use readdir() in #92778, I inadvertently reintroduced
the bug on that platform. Other platforms that had always used
readdir() were presumably never fixed.
This patch enables end_of_stream for all platforms, and adds a
Linux-specific regression test that should hopefully prevent the bug
from being reintroduced again.
Better documentation for env::home_dir()'s broken behaviour
This improves the documentation to say *why* it was deprecated. The reason was because it reads `HOME` on Windows which is meaningless there. Note that the PR that deprecated it stated that returning an empty string if `HOME` is set to an empty string was a problem, however I can find no evidence that this is the case. `cd` handles it fine whereas if `HOME` is unset it gives an explicit `HOME not set` error.
* Original deprecation reason: https://internals.rust-lang.org/t/deprecate-or-break-fix-std-env-home-dir/7315
* Original deprecation PR: https://github.com/rust-lang/rust/pull/51656
See #71684
Use rint intrinsic instead of roundeven to impement `round_ties_even`. They do the same thing when rounding mode is default, which Rust assumes.
And `rint` has better platform support.
Keeps `roundeven` around in `core::intrinsics`, it's doing no harm there.
This allows decoupling `Command::spawn` and `Command::output`. This is
useful for targets which do support launching programs in blocking mode
but do not support multitasking (Eg: UEFI).
This was originally conceived when working on https://github.com/rust-lang/rust/pull/100316
Signed-off-by: Ayush Singh <ayushsingh1325@gmail.com>
Avoid heap allocation when truncating thread names
Ensure that heap allocation does not occur in a thread until `std::thread` is ready. This fixes issues with custom allocators that call `std:🧵:current()`, since doing so prematurely initializes `THREAD_INFO` and causes the following `thread_info::set()` to fail.
Reimplement std's thread parker on top of events on SGX
Mutex and Condvar are being replaced by more efficient implementations, which need thread parking themselves (see #93740). Therefore, the generic `Parker` needs to be replaced on all platforms where the new lock implementation will be used.
SGX enclaves have a per-thread event state, which allows waiting for and setting specific bits. This is already used by the current mutex implementation. The thread parker can however be much more efficient, as it only needs to store the `TCS` address of one thread. This address is stored in a state variable, which can also be set to indicate the thread was already notified.
`park_timeout` does not guard against spurious wakeups like the current condition variable does. This is allowed by the API of `Parker`, and I think it is better to let users handle these wakeups themselves as the guarding is quite expensive and might not be necessary.
`@jethrogb` as you wrote the initial SGX support for `std`, I assume you are the target maintainer? Could you help me test this, please? Lacking a x86_64 chip, I can't run SGX.
Add `read_to_end` method for `sys::{target}::pipe::AnonPipe`. This allows
having a more optimized version of `read_to_end` for ChildStdout.
Signed-off-by: Ayush Singh <ayushsingh1325@gmail.com>
kmc-solid: `std::sys` code maintenance
Includes a set of changes to fix the [`*-kmc-solid_*`](https://doc.rust-lang.org/nightly/rustc/platform-support/kmc-solid.html) Tier 3 targets and make some other improvements.
- Address `fuzzy_provenance_casts` by using `expose_addr` and `from_exposed_addr` for pointer-integer casts
- Add a stub implementation of `is_terminal` (#98070)
- Address `unused_imports` and `unused_unsafe`
- Stop doing `Box::from_raw(&*(x: Box<T>) as *const T as *mut T)`
Ensure that heap allocation does not occur in a thread until std::thread
is ready. This fixes issues with custom allocators that call
std:🧵:current(), since doing so prematurely initializes
THREAD_INFO and causes the following thread_info::set() to fail.
On Linux, use mmap64, open64, openat64, and sendfile64 in place of their
non-LFS counterparts.
This is relevant to #94173.
With these changes (together with rust-lang/backtrace-rs#501), the
simple binaries I produce with rustc seem to have no non-LFS functions,
so maybe #94173 is fixed. But I can't be sure if I've missed something
and maybe some non-LFS functions could sneak in somehow.
Pass on null handle values to child process
Fixes#101645
In Windows, stdio handles are (semantically speaking) `Option<Handle>` where `Handle` is a non-zero value. When spawning a process with `Stdio::Inherit`, Rust currently turns zero values into `-1` values. This has the unfortunate effect of breaking console subprocesses (which typically need stdio) that are spawned from gui applications (that lack stdio by default) because the console process won't be assigned handles from the newly created console (as they usually would in that situation). Worse, `-1` is actually [a valid handle](https://doc.rust-lang.org/std/os/windows/io/struct.OwnedHandle.html) which means "the current process". So if a console process, for example, waits on stdin and it has a `-1` value then the process will end up waiting on itself.
This PR fixes it by propagating the nulls instead of converting them to `-1`.
While I think the current behaviour is a mistake, changing it (however justified) is an API change so I think this PR should at least have some input from t-libs-api. So choosing at random...
r? `@joshtriplett`
remove no-op 'let _ = '
Also see the discussion at https://github.com/rust-lang/rust/pull/93563#discussion_r1034057555.
I don't know why these `Drop` implementations exist to begin with, given that their body does literally nothing, but did not want to change that. (It might affect dropck.)
Cc `````@ibraheemdev````` `````@Amanieu`````
Commit 77005950f0 implemented masking of
FileType to fix an issue[^1] in the semantic of FileType comparison.
This commit introduces masking to Hash to maintain the invariant that
x == y => hash(x) == hash(y).
[^1]: https://github.com/rust-lang/rust/issues/104900
There are OSs that always return the lowest free value.
The algorithm in `lazy_init` always avoids keys with the
sentinel value.
In affected OSs, this means that each call to `lazy_init`
will always request two keys from the OS and returns/frees
the first one (with sentinel value) immediately afterwards.
By making the sentinel value configurable, affected OSs can
use a different value than zero to prevent this performance
issue.
Adjust inlining attributes around panic_immediate_abort
The goal of `panic_immediate_abort` is to permit the panic runtime and formatting code paths to be optimized away. But while poking through some disassembly of a small program compiled with that option, I found that was not the case. Enabling LTO did address that specific issue, but enabling LTO is a steep price to pay for this feature doing its job.
This PR fixes that, by tweaking two things:
* All the slice indexing functions that we `const_eval_select` on get `#[inline]`. `objdump -dC` told me that originally some `_ct` functions could end up in an executable. I won't pretend to understand what's going on there.
* Normalize attributes across all `panic!` wrappers: use `inline(never) + cold` normally, and `inline` when `panic_immediate_abort` is enabled.
But also, with LTO and `panic_immediate_abort` enabled, this patch knocks ~709 kB out of the `.text` segment of `librustc_driver.so`. That is slightly surprising to me, my best theory is that this shifts some inlining earlier in compilation, enabling some subsequent optimizations. The size improvement of `librustc_driver.so` with `panic_immediate_abort` due to this patch is greater with LTO than without LTO, which I suppose backs up this theory.
I do not know how to test this. I would quite like to, because I think what this is solving was an accidental regression. This only works with `-Zbuild-std` which is a cargo flag, and thus can't be used in a rustc codegen test.
r? `@thomcc`
---
I do not seriously think anyone is going to use a compiler built with `panic_immediate_abort`, but I wanted a big complicated Rust program to try this out on, and the compiler is such.
When spawning Commands, the path we use can end up being queried using `env::current_exe` (or the equivalent in other languages). Not all applications handle these paths properly therefore we should have a stronger preference for non-verbatim paths when spawning processes.
Add `type_ascribe!` macro as placeholder syntax for type ascription
This makes it still possible to test the internal semantics of type ascription even once the `:`-syntax is removed from the parser. The macro now gets used in a bunch of UI tests that test the semantics and not syntax of type ascription.
I might have forgotten a few tests but this should hopefully be most of them. The remaining ones will certainly be found once type ascription is removed from the parser altogether.
Part of #101728
Pointer-integer casts are required for conversion between `EXINF` (ITRON
task entry point parameter) and `*const ThreadInner`. Addresses the
deny-level lint `fuzzy_provenance_casts`.
Extract WStrUnits to sys_common::wstr
This commit extracts WStrUnits from sys::windows::args to sys_common::wstr. This allows using the same structure for other targets which use wtf8 (example UEFI).
This was originally a part of https://github.com/rust-lang/rust/pull/100316
Signed-off-by: Ayush Singh <ayushsingh1325@gmail.com>
This commit extracts WStrUnits from sys::windows::args to sys_common::wstr. This
allows using the same structure for other targets which use wtf8 (example UEFI).
This was originally a part of https://github.com/rust-lang/rust/pull/100316
Signed-off-by: Ayush Singh <ayushsingh1325@gmail.com>
Forbid inlining `thread_local!`'s `__getit` function on Windows
Sadly, this will make things slower to avoid UB in an edge case, but it seems hard to avoid... and really whenever I look at this code I can't help but think we're asking for trouble.
It's pretty dodgy for us to leave this as a normal function rather than `#[inline(never)]`, given that if it *does* get inlined into a dynamically linked component, it's extremely unsafe (you get some other thread local, or if you're lucky, crash). Given that it's pretty rare for people to use dylibs on Windows, the fact that we haven't gotten bug reports about it isn't really that convincing. Ideally we'd come up with some kind of compiler solution (that avoids paying for this cost when static linking, or *at least* for use within the same crate...), but it's not clear what that looks like.
Oh, and because all this is only needed when we're implementing `thread_local!` with `#[thread_local]`, this patch adjusts the `cfg_attr` to be `all(windows, target_thread_local)` as well.
r? ``@ChrisDenton``
See also #84933, which is about improving the situation.
Add slice methods for indexing via an array of indices.
Disclaimer: It's been a while since I contributed to the main Rust repo, apologies in advance if this is large enough already that it should've been an RFC.
---
# Update:
- Based on feedback, removed the `&[T]` variant of this API, and removed the requirements for the indices to be sorted.
# Description
This adds the following slice methods to `core`:
```rust
impl<T> [T] {
pub unsafe fn get_many_unchecked_mut<const N: usize>(&mut self, indices: [usize; N]) -> [&mut T; N];
pub fn get_many_mut<const N: usize>(&mut self, indices: [usize; N]) -> Option<[&mut T; N]>;
}
```
This allows creating multiple mutable references to disjunct positions in a slice, which previously required writing some awkward code with `split_at_mut()` or `iter_mut()`. For the bound-checked variant, the indices are checked against each other and against the bounds of the slice, which requires `N * (N + 1) / 2` comparison operations.
This has a proof-of-concept standalone implementation here: https://crates.io/crates/index_many
Care has been taken that the implementation passes miri borrow checks, and generates straight-forward assembly (though this was only checked on x86_64).
# Example
```rust
let v = &mut [1, 2, 3, 4];
let [a, b] = v.get_many_mut([0, 2]).unwrap();
std::mem::swap(a, b);
*v += 100;
assert_eq!(v, &[3, 2, 101, 4]);
```
# Codegen Examples
<details>
<summary>Click to expand!</summary>
Disclaimer: Taken from local tests with the standalone implementation.
## Unchecked Indexing:
```rust
pub unsafe fn example_unchecked(slice: &mut [usize], indices: [usize; 3]) -> [&mut usize; 3] {
slice.get_many_unchecked_mut(indices)
}
```
```nasm
example_unchecked:
mov rcx, qword, ptr, [r9]
mov r8, qword, ptr, [r9, +, 8]
mov r9, qword, ptr, [r9, +, 16]
lea rcx, [rdx, +, 8*rcx]
lea r8, [rdx, +, 8*r8]
lea rdx, [rdx, +, 8*r9]
mov qword, ptr, [rax], rcx
mov qword, ptr, [rax, +, 8], r8
mov qword, ptr, [rax, +, 16], rdx
ret
```
## Checked Indexing (Option):
```rust
pub unsafe fn example_option(slice: &mut [usize], indices: [usize; 3]) -> Option<[&mut usize; 3]> {
slice.get_many_mut(indices)
}
```
```nasm
mov r10, qword, ptr, [r9, +, 8]
mov rcx, qword, ptr, [r9, +, 16]
cmp rcx, r10
je .LBB0_7
mov r9, qword, ptr, [r9]
cmp rcx, r9
je .LBB0_7
cmp rcx, r8
jae .LBB0_7
cmp r10, r9
je .LBB0_7
cmp r9, r8
jae .LBB0_7
cmp r10, r8
jae .LBB0_7
lea r8, [rdx, +, 8*r9]
lea r9, [rdx, +, 8*r10]
lea rcx, [rdx, +, 8*rcx]
mov qword, ptr, [rax], r8
mov qword, ptr, [rax, +, 8], r9
mov qword, ptr, [rax, +, 16], rcx
ret
.LBB0_7:
mov qword, ptr, [rax], 0
ret
```
## Checked Indexing (Panic):
```rust
pub fn example_panic(slice: &mut [usize], indices: [usize; 3]) -> [&mut usize; 3] {
let len = slice.len();
match slice.get_many_mut(indices) {
Some(s) => s,
None => {
let tmp = indices;
index_many::sorted_bound_check_failed(&tmp, len)
}
}
}
```
```nasm
example_panic:
sub rsp, 56
mov rax, qword, ptr, [r9]
mov r10, qword, ptr, [r9, +, 8]
mov r9, qword, ptr, [r9, +, 16]
cmp r9, r10
je .LBB0_6
cmp r9, rax
je .LBB0_6
cmp r9, r8
jae .LBB0_6
cmp r10, rax
je .LBB0_6
cmp rax, r8
jae .LBB0_6
cmp r10, r8
jae .LBB0_6
lea rax, [rdx, +, 8*rax]
lea r8, [rdx, +, 8*r10]
lea rdx, [rdx, +, 8*r9]
mov qword, ptr, [rcx], rax
mov qword, ptr, [rcx, +, 8], r8
mov qword, ptr, [rcx, +, 16], rdx
mov rax, rcx
add rsp, 56
ret
.LBB0_6:
mov qword, ptr, [rsp, +, 32], rax
mov qword, ptr, [rsp, +, 40], r10
mov qword, ptr, [rsp, +, 48], r9
lea rcx, [rsp, +, 32]
mov edx, 3
call index_many::bound_check_failed
ud2
```
</details>
# Extensions
There are multiple optional extensions to this.
## Indexing With Ranges
This could easily be expanded to allow indexing with `[I; N]` where `I: SliceIndex<Self>`. I wanted to keep the initial implementation simple, so I didn't include it yet.
## Panicking Variant
We could also add this method:
```rust
impl<T> [T] {
fn index_many_mut<const N: usize>(&mut self, indices: [usize; N]) -> [&mut T; N];
}
```
This would work similar to the regular index operator and panic with out-of-bound indices. The advantage would be that we could more easily ensure good codegen with a useful panic message, which is non-trivial with the `Option` variant.
This is implemented in the standalone implementation, and used as basis for the codegen examples here and there.
Improve accuracy of asinh and acosh
This PR addresses the inaccuracy of `asinh` and `acosh` identified by the [Herbie](http://herbie.uwplse.org/) tool, `@pavpanchekha,` `@finnbear` in #104548. It also adds a couple tests that failed in the existing implementations and now pass.
Closes#104548
r? rust-lang/libs
Fix non-associativity of `Instant` math on `aarch64-apple-darwin` targets
This is a duplicate of #94100 (since the original author is unresponsive), which resolves#91417.
On `aarch64-apple-darwin` targets, the internal resolution of `Instant` is lower than that of `Duration`, so math between them becomes non-associative with small-enough durations.
This PR makes this target use the standard Unix implementation (where `Instant` has 1ns resolution), but with `CLOCK_UPTIME_RAW` so it still returns the same values as `mach_absolute_time`[^1].
(Edit: I need someone to confirm that this still works, I do not have access to an M1 device.)
[^1]: https://www.manpagez.com/man/3/clock_gettime/
There seem to be some scenarios where `cpu.cfs_period_us` can contain `0`
This causes a panic when calling `std:🧵:available_parallelism()` as is done so
from binaries built by `cargo test`, which was how the issue was
discovered. I don't feel like `0` is a good value for `cpu.cfs_period_us`, but I
also don't think applications should panic if this value is seen.
This case is handled by other projects which read this information:
- num_cpus: e437b9d908/src/linux.rs (L207-L210)
- ninja: https://github.com/ninja-build/ninja/pull/2174/files
- dotnet: c4341d45ac/src/coreclr/pal/src/misc/cgroup.cpp (L481-L483)
Before this change, this panic could be seen in environments setup as described
above:
```
$ RUST_BACKTRACE=1 cargo test
Finished test [unoptimized + debuginfo] target(s) in 3.55s
Running unittests src/main.rs (target/debug/deps/x-9a42e145aca2934d)
thread 'main' panicked at 'attempt to divide by zero', library/std/src/sys/unix/thread.rs:546:70
stack backtrace:
0: rust_begin_unwind
1: core::panicking::panic_fmt
2: core::panicking::panic
3: std::sys::unix:🧵:cgroups::quota
4: std::sys::unix:🧵:available_parallelism
5: std:🧵:available_parallelism
6: test::helpers::concurrency::get_concurrency
7: test::console::run_tests_console
8: test::test_main
9: test::test_main_static
10: x::main
at ./src/main.rs:1:1
11: core::ops::function::FnOnce::call_once
at /tmp/rust-1.64-1.64.0-1/library/core/src/ops/function.rs:248:5
note: Some details are omitted, run with `RUST_BACKTRACE=full` for a verbose backtrace.
error: test failed, to rerun pass '--bin local-rabmq-amqpprox'
```
I've tested this change in an environment which has the bad setup and
rebuilding the test executable against a fixed std library fixes the
panic.
Remove unused symbols and diagnostic items
As the title suggests, this removes unused symbols from `sym::` and `#[rustc_diagnostic_item]` annotations that weren't mentioned anywhere.
Originally I tried to use grep, to find symbols and item names that are never mentioned via `sym::name`, however this produced a lot of false positives (?), for example clippy matching on `Symbol::as_str` or macros "implicitly" adding `sym::`. I ended up fixing all these false positives (?) by hand, but tbh I'm not sure if it was worth it...
Update compiler-builtins
This was originally a part of https://github.com/rust-lang/rust/pull/100316. However, extracting it to a seperate PR should help with any extra testing that might be needed.
Signed-off-by: Ayush Singh <ayushsingh1325@gmail.com>
Move `unix_socket_abstract` feature API to `SocketAddrExt`.
The pre-stabilized API for abstract socket addresses exposes methods on `SocketAddr` that are only enabled for `cfg(any(target_os = "android", target_os = "linux"))`. Per discussion in <https://github.com/rust-lang/rust/issues/85410>, moving these methods to an OS-specific extension trait is required before stabilization can be considered.
This PR makes four changes:
1. The internal module `std::os::net` contains logic for the unstable feature `tcp_quickack` (https://github.com/rust-lang/rust/issues/96256). I moved that code into `linux_ext/tcp.rs` and tried to adjust the module tree so it could accommodate a second unstable feature there.
2. Moves the public API out of `impl SocketAddr`, into `impl SocketAddrExt for SocketAddr` (the headline change).
3. The existing function names and docs for `unix_socket_abstract` refer to addresses as being created from abstract namespaces, but a more accurate description is that they create sockets in *the* abstract namespace. I adjusted the function signatures correspondingly and tried to update the docs to be clearer.
4. I also tweaked `from_abstract_name` so it takes an `AsRef<[u8]>` instead of `&[u8]`, allowing `b""` literals to be passed directly.
Issues:
1. The public module `std::os::linux::net` is marked as part of `tcp_quickack`. I couldn't figure out how to mark a module as being part of two unstable features, so I just left the existing attributes in place. My hope is that this will be fixed as a side-effect of stabilizing either feature.
Rollup of 9 pull requests
Successful merges:
- #103709 (ci: Upgrade dist-x86_64-netbsd to NetBSD 9.0)
- #103744 (Upgrade cc for working is_flag_supported on cross-compiles)
- #104105 (llvm: dwo only emitted when object code emitted)
- #104158 (Return .efi extension for EFI executable)
- #104181 (Add a few known-bug tests)
- #104266 (Regression test for coercion of mut-ref to dyn-star)
- #104300 (Document `Path::parent` behavior around relative paths)
- #104304 (Enable profiler in dist-s390x-linux)
- #104362 (Add `delay_span_bug` to `AttrWrapper::take_for_recovery`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Document `Path::parent` behavior around relative paths
A relative path with just one component will return `Some("")` as its parent, which wasn't clear to me from the documentation.
The parent of `""` is `None`, which was missing from the documentation as well.
Change the way libunwind is linked for *-windows-gnullvm targets
I have no idea why previous way works for `x86_64-fortanix-unknown-sgx` (assuming it actually works...) but not for `gnullvm`. It fails when linking libtest during Rust build (unless somebody adds `RUSTFLAGS='-Clinkarg=-lunwind'`).
Also fixes exception handling on AArch64.
This was originally a part of https://github.com/rust-lang/rust/pull/100316.
However, extracting it to a seperate PR should help with any extra
testing that might be needed.
Signed-off-by: Ayush Singh <ayushsingh1325@gmail.com>
Merge crossbeam-channel into `std::sync::mpsc`
This PR imports the [`crossbeam-channel`](https://github.com/crossbeam-rs/crossbeam/tree/master/crossbeam-channel#crossbeam-channel) crate into the standard library as a private module, `sync::mpmc`. `sync::mpsc` is now implemented as a thin wrapper around `sync::mpmc`. The primary purpose of this PR is to resolve https://github.com/rust-lang/rust/issues/39364. The public API intentionally remains the same.
The reason https://github.com/rust-lang/rust/issues/39364 has not been fixed in over 5 years is that the current channel is *incredibly* complex. It was written many years ago and has sat mostly untouched since. `crossbeam-channel` has become the most popular alternative on crates.io, amassing over 30 million downloads. While crossbeam's channel is also complex, like all fast concurrent data structures, it avoids some of the major issues with the current implementation around dynamic flavor upgrades. The new implementation decides on the datastructure to be used when the channel is created, and the channel retains that structure until it is dropped.
Replacing `sync::mpsc` with a simpler, less performant implementation has been discussed as an alternative. However, Rust touts itself as enabling *fearless concurrency*, and having the standard library feature a subpar implementation of a core concurrency primitive doesn't feel right. The argument is that slower is better than broken, but this PR shows that we can do better.
As mentioned before, the primary purpose of this PR is to fix https://github.com/rust-lang/rust/issues/39364, and so the public API intentionally remains the same. *After* that problem is fixed, the fact that `sync::mpmc` now exists makes it easier to fix the primary limitation of `mpsc`, the fact that it only supports a single consumer. spmc and mpmc are two other common concurrency patterns, and this change enables a path to deprecating `mpsc` and exposing a general `sync::channel` module that supports multiple consumers. It also implements other useful methods such as `send_timeout`. That said, exposing MPMC and other new functionality is mostly out of scope for this PR, and it would be helpful if discussion stays on topic :)
For what it's worth, the new implementation has also been shown to be more performant in [some basic benchmarks](https://github.com/crossbeam-rs/crossbeam/tree/master/crossbeam-channel/benchmarks#results).
cc `@taiki-e`
r? rust-lang/libs
Add the `#[derive_const]` attribute
Closes#102371. This is a minimal patchset for the attribute to work. There are no restrictions on what traits this attribute applies to.
r? `````@oli-obk`````
Remove lock wrappers in `sys_common`
This moves the lazy allocation to `sys` (SGX and UNIX). While this leads to a bit more verbosity, it will simplify future improvements by making room in `sys_common` for platform-independent implementations.
This also removes the condvar check on SGX as it is not necessary for soundness and will be removed anyway once mutex has been made movable.
For simplicity's sake, `libunwind` also uses lazy allocation now on SGX. This will require an update to the C definitions before merging this (CC `@raoulstrackx).`
r? `@m-ou-se`
A relative path with just one component will return `Some("")` as its
parent, which wasn't clear to me from the documentation.
The parent of `""` is `None`, which was missing from the documentation
as well.
Make `Hash`, `Hasher` and `BuildHasher` `#[const_trait]` and make `Sip` const `Hasher`
This PR enables using Hashes in const context.
r? ``@fee1-dead``
Added documentation for IPv6 Addresses `IN6ADDR_ANY_INIT` also known as
`in6addr_any` and `IN6ADDR_LOOPBACK_INIT` also known as
`in6addr_loopback` similar to `INADDR_ANY` for IPv4 Addresses.
The new implementation doesn't use weak lang items and instead changes
`#[alloc_error_handler]` to an attribute macro just like
`#[global_allocator]`.
The attribute will generate the `__rg_oom` function which is called by
the compiler-generated `__rust_alloc_error_handler`. If no `__rg_oom`
function is defined in any crate then the compiler shim will call
`__rdl_oom` in the alloc crate which will simply panic.
This also fixes link errors with `-C link-dead-code` with
`default_alloc_error_handler`: `__rg_oom` was previously defined in the
alloc crate and would attempt to reference the `oom` lang item, even if
it didn't exist. This worked as long as `__rg_oom` was excluded from
linking since it was not called.
This is a prerequisite for the stabilization of
`default_alloc_error_handler` (#102318).
The signature for new was
```
fn new<F>(f: F) -> Lazy<T, F>
```
Notably, with `F` unconstrained, `T` can be literally anything, and just
`let _ = Lazy::new(|| 92)` would not typecheck.
This historiacally was a necessity -- `new` is a `const` function, it
couldn't have any bounds. Today though, we can move `new` under the `F:
FnOnce() -> T` bound, which gives the compiler enough data to infer the
type of T from closure.
Truncate thread names on Linux and Apple targets
These targets have system limits on the thread names, 16 and 64 bytes
respectively, and `pthread_setname_np` returns an error if the name is
longer. However, we're not in a context that can propagate errors when
we call this, and we used to implicitly truncate on Linux with `prctl`,
so now we manually truncate these names ahead of time.
r? ``````@thomcc``````
Fix grammar in docs for std::io::Read
Two independent clauses were incorrectly joined by a bare comma. The simplest fix would be to switch to a semicolon, but I think it's slightly better to keep the comma and use the coordinating conjunction "so".
Update libstd's libc to 0.2.135 (to make `libstd` no longer pull in `libiconv.dylib` on Darwin)
This is to pull in https://github.com/rust-lang/libc/pull/2944.
It's related to https://github.com/rust-lang/rust/pull/102766, in that they both remove unused dylibs from libstd on Darwin platforms. As a result, I'm marking this as relnotes since everybody agreed it was good to add it to the other as well. (The note should be about no longer linking against libiconv -- the libc update is irrelevant).
Might as well have the same reviewer too.
r? `@Mark-Simulacrum`
Don't link to `libresolv` in libstd on Darwin
Currently we link `libresolv` into every Rust program on apple targets despite never using it (as of https://github.com/rust-lang/rust/pull/44965). I had thought we needed this for `getaddrinfo` or something, but we do not / cannot safely use it.
I'd like to fix this for `libiconv` too (the other library we pull in. that's harder since it's coming in through `libc`, which is https://github.com/rust-lang/libc/pull/2944)).
---
This may warrant release notes. I'm not sure but I've added the flag regardless -- It's a change to the list of dylibs every Rust program pulls in, so it's worth mentioning.
It's pretty unlikely anybody was relying on this being pulled in, and `std` does not guarantee that it will link (and thus transitively provide access to) any particular system library -- anybody relying on that behavior would already be broken when dynamically linking std. That is, there's an outside chance something will fail to link on macOS and iOS because it was accidentally relying on our unnecessary dependency.
(If that *does* happen, that project could be easily fixed by linking libresolv explicitly on those platforms, probably via `#[link(name = "resolv")] extern {}`,` -Crustc-link-lib=resolv`, `println!("cargo:rustc-link-lib=resolv")`, or one of several places in `.config/cargo.toml`)
---
I'm also going to preemptively add the nomination for discussing this in the libs meeting. Basically: Do we care about programs that assume we will bring libraries in that we do not use. `libresolv` and `libiconv` on macOS/iOS are in this camp (`libresolv` because we used to use it, and `libiconv` because the `libc` crate was unintentionally(?) pulling it in to every Rust program).
I'd like to remove them both, but this may cause link issues programs that are relying on `std` to depend on them transitively. (Relying on std for this does not work in all build configurations, so this seems very fragile, and like a use case we should not support).
More generally, IMO we should not guarantee the specific set of system-provided libraries we use (beyond what is implied by an OS version requirement), which means we'd be free to remove this cruft.
Stabilize `duration_checked_float`
## Stabilization Report
This stabilization report is for a stabilization of `duration_checked_float`, tracking issue: https://github.com/rust-lang/rust/issues/83400.
### Implementation History
- https://github.com/rust-lang/rust/pull/82179
- https://github.com/rust-lang/rust/pull/90247
- https://github.com/rust-lang/rust/pull/96051
- Changed error type to `FromFloatSecsError` in https://github.com/rust-lang/rust/pull/90247
- https://github.com/rust-lang/rust/pull/96051 changes the rounding mode to round-to-nearest instead of truncate.
## API Summary
This stabilization report proposes the following API to be stabilized in `core`, along with their re-exports in `std`:
```rust
// core::time
impl Duration {
pub const fn try_from_secs_f32(secs: f32) -> Result<Duration, TryFromFloatSecsError>;
pub const fn try_from_secs_f64(secs: f64) -> Result<Duration, TryFromFloatSecsError>;
}
#[derive(Debug, Clone, PartialEq, Eq)]
pub struct TryFromFloatSecsError { ... }
impl core::fmt::Display for TryFromFloatSecsError { ... }
impl core::error::Error for TryFromFloatSecsError { ... }
```
These functions are made const unstable under `duration_consts_float`, tracking issue #72440.
There is an open question in the tracking issue around what the error type should be called which I was hoping to resolve in the context of an FCP.
In this stabilization PR, I have altered the name of the error type to `TryFromFloatSecsError`. In my opinion, the error type shares the name of the method (adjusted to accommodate both types of floats), which is consistent with other error types in `core`, `alloc` and `std` like `TryReserveError` and `TryFromIntError`.
## Experience Report
Code such as this is ready to be converted to a checked API to ensure it is panic free:
```rust
impl Time {
pub fn checked_add_f64(&self, seconds: f64) -> Result<Self, TimeError> {
// Fail safely during `f64` conversion to duration
if seconds.is_nan() || seconds.is_infinite() {
return Err(TzOutOfRangeError::new().into());
}
if seconds.is_sign_positive() {
self.checked_add(Duration::from_secs_f64(seconds))
} else {
self.checked_sub(Duration::from_secs_f64(-seconds))
}
}
}
```
See: https://github.com/artichoke/artichoke/issues/2194.
`@rustbot` label +T-libs-api -T-libs
cc `@mbartlett21`
kmc-solid: Handle errors returned by `SOLID_FS_ReadDir`
Fixes the issue where the `std::fs::ReadDir` implementaton of the [`*-kmc-solid_*`](https://doc.rust-lang.org/nightly/rustc/platform-support/kmc-solid.html) Tier 3 targets silently suppressed errors returned by the underlying `SOLID_FS_ReadDir` system function. The new implementation correctly handles all cases:
- `SOLID_ERR_NOTFOUND` indicates the end of directory stream.
- `SOLID_ERR_OK` + non-empty `d_name` indicates success.
- Some old filesystem drivers may return `SOLID_ERR_OK` + empty `d_name` to indicate the end of directory stream.
- Any other negative values (per ITRON convention) represent an error.
Document surprising and dangerous fs::Permissions behaviour on Unix
This documents the very surprising behaviour that `set_readonly(false)` will make a file *world writable* on Unix. I would go so far as to say that this function should be deprecated on Unix, or maybe even entirely. But documenting the bad behaviour is a good first step.
Fixes#74895
Eliminate 280-byte memset from ReadDir iterator
This guy:
1536ab1b38/library/std/src/sys/unix/fs.rs (L589)
It turns out `libc::dirent64` is quite big—https://docs.rs/libc/0.2.135/libc/struct.dirent64.html. In #103135 this memset accounted for 0.9% of the runtime of iterating a big directory.
Almost none of the big zeroed value is ever used. We memcpy a tiny prefix (19 bytes) into it, and then read just 9 bytes (`d_ino` and `d_type`) back out. We can read exactly those 9 bytes we need directly from the original entry_ptr instead.
## History
This code got added in #93459 and tweaked in #94272 and #94750.
Prior to #93459, there was no memset but a full 280 bytes were being copied from the entry_ptr.
<table><tr><td>copy 280 bytes</td></tr></table>
This was not legal because not all of those bytes might be initialized, or even allocated, depending on the length of the directory entry's name, leading to a segfault. That PR fixed the segfault by creating a new zeroed dirent64 and copying just the guaranteed initialized prefix into it.
<table><tr><td>memset 280 bytes</td><td>copy 19 bytes</td></tr></table>
However this was still buggy because it used `addr_of!((*entry_ptr).d_name)`, which is considered UB by Miri in the case that the full extent of entry_ptr is not in bounds of the same allocation. (Arguably this shouldn't be a requirement, but here we are.)
The UB got fixed by #94272 by replacing `addr_of` with some pointer manipulation based on `offset_from`, but still fundamentally the same operation.
<table><tr><td>memset 280 bytes</td><td>copy 19 bytes</td></tr></table>
Then #94750 noticed that only 9 of those 19 bytes were even being used, so we could pick out only those 9 to put in the ReadDir value.
<table><tr><td>memset 280 bytes</td><td>copy 19 bytes</td><td>copy 9 bytes</td></tr></table>
After my PR we just grab the 9 needed bytes directly from entry_ptr.
<table><tr><td>copy 9 bytes</td></tr></table>
The resulting code is more complex but I believe still worthwhile to land for the following reason. This is an extremely straightforward thing to accomplish in C and clearly libc assumes that; literally just `entry_ptr->d_name`. The extra work in comparison to accomplish it in Rust is not an example of any actual safety being provided by Rust. I believe it's useful to have uncovered that and think about what could be done in the standard library or language to support this obvious operation better.
## References
- https://man7.org/linux/man-pages/man3/readdir.3.html
Reduce false positives in msys2 detection
Currently msys2 will be detected by getting the file path and looking to see if it contains the substrings "msys-" and "-ptr" (or "cygwin-" and "-pty"). This risks false positives, especially with filesystem files and if `GetFileInformationByHandleEx` returns a [full path](https://learn.microsoft.com/en-us/windows-hardware/drivers/ddi/ntifs/nf-ntifs-ntqueryinformationfile#remarks).
This PR adds a check to see if the handle is a pipe before doing the substring search. Additionally, for "msys2-" or "cygwin-" it only checks if the file name starts with the substring rather than looking at the whole path.
These targets have system limits on the thread names, 16 and 64 bytes
respectively, and `pthread_setname_np` returns an error if the name is
longer. However, we're not in a context that can propagate errors when
we call this, and we used to implicitly truncate on Linux with `prctl`,
so now we manually truncate these names ahead of time.
Change process spawning to inherit the parent's signal mask by default
Previously, the signal mask was always reset when a child process is
started. This breaks tools like `nohup` which expect `SIGHUP` to be
blocked for all transitive processes.
With this change, the default behavior changes to inherit the signal mask.
This also changes the signal disposition for `SIGPIPE` to only be changed if the `#[unix_sigpipe]` attribute isn't set.
Mark `std::os::wasi::io::AsFd` etc. as stable.
io_safety was stabilized in Rust 1.63, so mark the io_safety exports in `std::os::wasi::io` as stable.
Fixes#103306.
Previously, the signal mask is always reset when a child process is
started. This breaks tools like `nohup` which expect `SIGHUP` to be
blocked.
With this change, the default behavior changes to inherit the signal mask.
This also changes the signal disposition for `SIGPIPE` to only be
changed if the `#[unix_sigpipe]` attribute isn't set.
std: use `sync::Mutex` for internal statics
Since `sync::Mutex` is now `const`-constructible, it can be used for internal statics, removing the need for `sys_common::StaticMutex`. This adds some extra allocations on platforms which need to box their mutexes (currently SGX and some UNIX), but these will become unnecessary with the lock improvements tracked in #93740.
I changed the program argument implementation on Hermit, it does not need `Mutex` but can use atomics like some UNIX systems (ping `@mkroening` `@stlankes).`
Use semaphores for thread parking on Apple platforms
Currently we use a mutex-condvar pair for thread parking on Apple systems. Unfortunately, `pthread_cond_timedwait` uses the real-time clock for measuring time, which causes problems when the system time changes. The parking implementation in this PR uses a semaphore instead, which measures monotonic time by default, avoiding these issues. As a further benefit, this has the potential to improve performance a bit, since `unpark` does not need to wait for a lock to be released.
Since the Mach semaphores are poorly documented (I could not find availability or stability guarantees for instance), this uses a [dispatch semaphore](https://developer.apple.com/documentation/dispatch/dispatch_semaphore?language=objc) instead. While it adds a layer of indirection (it uses Mach semaphores internally), the overhead is probably negligible.
Tested on macOS 12.5.
r? ``````@thomcc``````
Add `IsTerminal` trait to determine if a descriptor or handle is a terminal
The UNIX implementation uses `isatty`. The Windows implementation uses
the same logic the `atty` crate uses, including the hack needed to
detect msys terminals.
Implement this trait for `Stdin`/`Stdout`/`Stderr`/`File` on all
platforms. On Unix, implement it for `BorrowedFd`/`OwnedFd`. On Windows,
implement it for `BorrowedHandle`/`OwnedHandle`.
Based on https://github.com/rust-lang/rust/pull/91121
Co-authored-by: Matt Wilkinson <mattwilki17@gmail.com>
