If a raw string was used in the `env!` invocation, then it should also
be shown in the diagnostic messages as a raw string.
Signed-off-by: David Wood <david@davidtw.co>
fix(resolve): skip panic when resolution is dummy
Fixes#113953
Skip the panic when the binding refers to a dummy node during the finalization.
r? `@petrochenkov`
Add `x86_64-unikraft-linux-musl` target
This introduces `x86_64-unikraft-linux-musl` as the first Rust target for the [Unikraft] Unikernel Development Kit.
[Unikraft]: https://unikraft.org/
Unikraft imitates Linux and uses musl as libc.
It is extremely configurable, and does not even provide a `poll` implementation or a network stack, unless enabled by the end user who compiles the application.
Our approach for integrating the build process with `rustc` is to hide the build process as well as the actual final linking step behind a linker-shim (`kraftld`, see https://github.com/unikraft/kraftkit/issues/612).
## Tier 3 target policy
> - A tier 3 target must have a designated developer or developers (the "target
> maintainers") on record to be CCed when issues arise regarding the target.
> (The mechanism to track and CC such developers may evolve over time.)
I will be the target maintainer.
> - Targets must use naming consistent with any existing targets; for instance, a
> target for the same CPU or OS as an existing Rust target should use the same
> name for that CPU or OS. Targets should normally use the same names and
> naming conventions as used elsewhere in the broader ecosystem beyond Rust
> (such as in other toolchains), unless they have a very good reason to
> diverge. Changing the name of a target can be highly disruptive, especially
> once the target reaches a higher tier, so getting the name right is important
> even for a tier 3 target.
> - Target names should not introduce undue confusion or ambiguity unless
> absolutely necessary to maintain ecosystem compatibility. For example, if
> the name of the target makes people extremely likely to form incorrect
> beliefs about what it targets, the name should be changed or augmented to
> disambiguate it.
> - If possible, use only letters, numbers, dashes and underscores for the name.
> Periods (`.`) are known to cause issues in Cargo.
The target name `x86_64-unikraft-linux-musl` was derived from `x86_64-unknown-linux-musl`, setting Unikraft as vendor.
Unikraft exactly imitates Linux + musl.
> - Tier 3 targets may have unusual requirements to build or use, but must not
> create legal issues or impose onerous legal terms for the Rust project or for
> Rust developers or users.
> - The target must not introduce license incompatibilities.
> - Anything added to the Rust repository must be under the standard Rust
> license (`MIT OR Apache-2.0`).
> - The target must not cause the Rust tools or libraries built for any other
> host (even when supporting cross-compilation to the target) to depend
> on any new dependency less permissive than the Rust licensing policy. This
> applies whether the dependency is a Rust crate that would require adding
> new license exceptions (as specified by the `tidy` tool in the
> rust-lang/rust repository), or whether the dependency is a native library
> or binary. In other words, the introduction of the target must not cause a
> user installing or running a version of Rust or the Rust tools to be
> subject to any new license requirements.
> - Compiling, linking, and emitting functional binaries, libraries, or other
> code for the target (whether hosted on the target itself or cross-compiling
> from another target) must not depend on proprietary (non-FOSS) libraries.
> Host tools built for the target itself may depend on the ordinary runtime
> libraries supplied by the platform and commonly used by other applications
> built for the target, but those libraries must not be required for code
> generation for the target; cross-compilation to the target must not require
> such libraries at all. For instance, `rustc` built for the target may
> depend on a common proprietary C runtime library or console output library,
> but must not depend on a proprietary code generation library or code
> optimization library. Rust's license permits such combinations, but the
> Rust project has no interest in maintaining such combinations within the
> scope of Rust itself, even at tier 3.
> - "onerous" here is an intentionally subjective term. At a minimum, "onerous"
> legal/licensing terms include but are *not* limited to: non-disclosure
> requirements, non-compete requirements, contributor license agreements
> (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms,
> requirements conditional on the employer or employment of any particular
> Rust developers, revocable terms, any requirements that create liability
> for the Rust project or its developers or users, or any requirements that
> adversely affect the livelihood or prospects of the Rust project or its
> developers or users.
No dependencies were added to Rust.
Requirements for linking are [Unikraft] and [KraftKit] (both BSD-3-Clause), but none of these are added to Rust.
[KraftKit]: https://github.com/unikraft/kraftkit
> - Neither this policy nor any decisions made regarding targets shall create any
> binding agreement or estoppel by any party. If any member of an approving
> Rust team serves as one of the maintainers of a target, or has any legal or
> employment requirement (explicit or implicit) that might affect their
> decisions regarding a target, they must recuse themselves from any approval
> decisions regarding the target's tier status, though they may otherwise
> participate in discussions.
> - This requirement does not prevent part or all of this policy from being
> cited in an explicit contract or work agreement (e.g. to implement or
> maintain support for a target). This requirement exists to ensure that a
> developer or team responsible for reviewing and approving a target does not
> face any legal threats or obligations that would prevent them from freely
> exercising their judgment in such approval, even if such judgment involves
> subjective matters or goes beyond the letter of these requirements.
Understood.
I am not a member of a Rust team.
> - Tier 3 targets should attempt to implement as much of the standard libraries
> as possible and appropriate (`core` for most targets, `alloc` for targets
> that can support dynamic memory allocation, `std` for targets with an
> operating system or equivalent layer of system-provided functionality), but
> may leave some code unimplemented (either unavailable or stubbed out as
> appropriate), whether because the target makes it impossible to implement or
> challenging to implement. The authors of pull requests are not obligated to
> avoid calling any portions of the standard library on the basis of a tier 3
> target not implementing those portions.
Understood.
`std` is supported.
> - The target must provide documentation for the Rust community explaining how
> to build for the target, using cross-compilation if possible. If the target
> supports running binaries, or running tests (even if they do not pass), the
> documentation must explain how to run such binaries or tests for the target,
> using emulation if possible or dedicated hardware if necessary.
Building is described in the platform support doc.
It will be updated once proper `kraftld` support has landed.
> - Tier 3 targets must not impose burden on the authors of pull requests, or
> other developers in the community, to maintain the target. In particular,
> do not post comments (automated or manual) on a PR that derail or suggest a
> block on the PR based on a tier 3 target. Do not send automated messages or
> notifications (via any medium, including via ``@`)` to a PR author or others
> involved with a PR regarding a tier 3 target, unless they have opted into
> such messages.
> - Backlinks such as those generated by the issue/PR tracker when linking to
> an issue or PR are not considered a violation of this policy, within
> reason. However, such messages (even on a separate repository) must not
> generate notifications to anyone involved with a PR who has not requested
> such notifications.
Understood.
> - Patches adding or updating tier 3 targets must not break any existing tier 2
> or tier 1 target, and must not knowingly break another tier 3 target without
> approval of either the compiler team or the maintainers of the other tier 3
> target.
> - In particular, this may come up when working on closely related targets,
> such as variations of the same architecture with different features. Avoid
> introducing unconditional uses of features that another variation of the
> target may not have; use conditional compilation or runtime detection, as
> appropriate, to let each target run code supported by that target.
I don't think this PR breaks anything.
r? compiler-team
fix intra-doc links on nested `use` and `extern crate` items
This PR fixes two rustdoc ICEs that happen if there are any intra-doc links on nested `use` or `extern crate` items, for example:
```rust
/// Re-export [`fmt`] and [`io`].
pub use std::{fmt, io}; // "nested" use = use with braces
/// Re-export [`std`].
pub extern crate std;
```
Nested use items were incorrectly considered private and therefore didn't have their intra-doc links resolved. I fixed this by always resolving intra-doc links for nested `use` items that are declared `pub`.
<details>
During AST->HIR lowering, nested `use` items are desugared like this:
```rust
pub use std::{}; // "list stem"
pub use std::fmt;
pub use std::io;
```
Each of these HIR nodes has it's own effective visibility and the list stem is always considered private.
To check the effective visibility of an AST node, the AST node is mapped to a HIR node with `Resolver::local_def_id`, which returns the (private) list stem for nested use items.
</details>
For `extern crate`, there was a hack in rustdoc that stored the `DefId` of the crate itself in the cleaned item, instead of the `DefId` of the `extern crate` item. This made rustdoc look at the resolved links of the extern crate's crate root instead of the `extern crate` item. I've removed this hack and instead translate the `DefId` in the appropriate places.
As as side effect of fixing `extern crate`, i've turned
```rust
#[doc(masked)]
extern crate self as _;
```
into a no-op instead of hiding all trait impls. Proper verification for `doc(masked)` is included as a bonus.
fixes https://github.com/rust-lang/rust/issues/113896
lint/ctypes: only try normalize
Fixes#113900.
Now that this lint runs on any external-ABI fn-ptr, normalization won't always succeed, so use `try_normalize_erasing_regions` instead.
Optimize format usage
Per #112156, using `&` in `format!` may cause a small perf delay, so I tried to clean up one module at a time format usage. This PR includes a few removals of the ref in format (they do compile locally without the ref), as well as a few format inlining for consistency.
Optimize format usage
Per #112156, using `&` in `format!` may cause a small perf delay, so I tried to clean up one module at a time format usage. This PR includes a few removals of the ref in format (they do compile locally without the ref), as well as a few format inlining for consistency.
arm-none fixups
- Remove "-unknown" from `llvm_target` for arm\*v7r-none-eabi\* targets.
- Remove redundant `c_enum_min_bits` option from the thumbv4t-none-eabi target.
- Fix comments about GCC/Clang's enum width for arm-none targets.
Previously part of #110482, which is a larger change to add a new target.
These nits were found along the way.
rustdoc: handle cross-crate RPITITs correctly
Filter out the internal associated types synthesized during the desugaring of RPITITs, they really shouldn't show up in the docs.
This also fixes#113929 since we're no longer invoking `is_impossible_associated_item` (renamed from `is_impossible_method`) which cannot handle them (leading to an ICE). I don't think it makes sense to try to make `is_impossible_associated_item` handle this exotic kind of associated type (CC original author `@compiler-errors).`
@ T-rustdoc reviewers, currently I'm throwing out ITIT assoc tys before cleaning assoc tys at each usage-site. I'm thinking about making `clean_middle_assoc_item` return an `Option<_>` instead and doing the check inside of it to prevent any call sites from forgetting the check for ITITs. Since I wasn't sure if you would like that approach, I didn't go through with it. Let me know what you think.
<details><summary>Explanation on why <code>is_impossible_associated_item(itit_assoc_ty)</code> leads to an ICE</summary>
Given the following code:
```rs
pub trait Trait { fn def<T>() -> impl Default {} }
impl Trait for () {}
```
The generated associated type looks something like (simplified):
```rs
type {opaque#0}<T>: Default = impl Default; // the name is actually `kw::Empty` but this is the `def_path_str` repr
```
The query `is_impossible_associated_item` goes through all predicates of the associated item – in this case `<T as Sized>` – to check if they contain any generic parameters from the (generic) associated type itself. For predicates that don't contain any *own* generics, it does further processing, part of which is instantiating the predicate with the generic arguments of the impl block (which is only correct if they truly don't contain any own generics since they wouldn't get instantiated this way leading to an ICE).
It checks if `parent_def_id(T) == assoc_ty_def_id` to get to know if `T` is owned by the assoc ty. Unfortunately this doesn't work for ITIT assoc tys. In this case, the parent of `T` is `Trait::def` (!) which is the associated function (I'm pretty sure this is very intentional) which is of course not equal to the assoc ty `Trait::{opaque#0}`.
</details>
`@rustbot` label A-cross-crate-reexports
During borrowck, the `MultiSpan` from a buffered diagnostic is cloned and
used to emit a delayed bug indicating a diagnostic was buffered - when
the buffered diagnostic is translated, then the cloned `MultiSpan` may
contain labels which can only render with the diagnostic's arguments, but
the delayed bug being emitted won't have those arguments. Adds a function
which clones `MultiSpan` without also cloning the contained labels, and
use this function when creating the buffered diagnostic delayed bug.
Signed-off-by: David Wood <david@davidtw.co>
Add `riscv64gc-unknown-hermit` target
This PR adds the new `riscv64gc-unknown-hermit` target, initially created by `@simonschoening,` a 64-bit RISC-V target for the [Hermit] unikernel project.
Furthermore, this cleans up the existing Hermit targets and adds a platform support documentation page for _all_ Hermit targets and goes through the new tier 3 target policy process:
[Hermit]: https://github.com/hermitcore
## Tier 3 target policy
> - A tier 3 target must have a designated developer or developers (the "target
> maintainers") on record to be CCed when issues arise regarding the target.
> (The mechanism to track and CC such developers may evolve over time.)
`@stlankes` as the Hermit project lead and I will be the target maintainers.
> - Targets must use naming consistent with any existing targets; for instance, a
> target for the same CPU or OS as an existing Rust target should use the same
> name for that CPU or OS. Targets should normally use the same names and
> naming conventions as used elsewhere in the broader ecosystem beyond Rust
> (such as in other toolchains), unless they have a very good reason to
> diverge. Changing the name of a target can be highly disruptive, especially
> once the target reaches a higher tier, so getting the name right is important
> even for a tier 3 target.
> - Target names should not introduce undue confusion or ambiguity unless
> absolutely necessary to maintain ecosystem compatibility. For example, if
> the name of the target makes people extremely likely to form incorrect
> beliefs about what it targets, the name should be changed or augmented to
> disambiguate it.
> - If possible, use only letters, numbers, dashes and underscores for the name.
> Periods (`.`) are known to cause issues in Cargo.
The target name `riscv64gc-unknown-hermit` was derived from the existing `x86_64-unknown-hermit` and `aarch64-unknown-hermit` targets.
> - Tier 3 targets may have unusual requirements to build or use, but must not
> create legal issues or impose onerous legal terms for the Rust project or for
> Rust developers or users.
> - The target must not introduce license incompatibilities.
> - Anything added to the Rust repository must be under the standard Rust
> license (`MIT OR Apache-2.0`).
> - The target must not cause the Rust tools or libraries built for any other
> host (even when supporting cross-compilation to the target) to depend
> on any new dependency less permissive than the Rust licensing policy. This
> applies whether the dependency is a Rust crate that would require adding
> new license exceptions (as specified by the `tidy` tool in the
> rust-lang/rust repository), or whether the dependency is a native library
> or binary. In other words, the introduction of the target must not cause a
> user installing or running a version of Rust or the Rust tools to be
> subject to any new license requirements.
> - Compiling, linking, and emitting functional binaries, libraries, or other
> code for the target (whether hosted on the target itself or cross-compiling
> from another target) must not depend on proprietary (non-FOSS) libraries.
> Host tools built for the target itself may depend on the ordinary runtime
> libraries supplied by the platform and commonly used by other applications
> built for the target, but those libraries must not be required for code
> generation for the target; cross-compilation to the target must not require
> such libraries at all. For instance, `rustc` built for the target may
> depend on a common proprietary C runtime library or console output library,
> but must not depend on a proprietary code generation library or code
> optimization library. Rust's license permits such combinations, but the
> Rust project has no interest in maintaining such combinations within the
> scope of Rust itself, even at tier 3.
> - "onerous" here is an intentionally subjective term. At a minimum, "onerous"
> legal/licensing terms include but are *not* limited to: non-disclosure
> requirements, non-compete requirements, contributor license agreements
> (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms,
> requirements conditional on the employer or employment of any particular
> Rust developers, revocable terms, any requirements that create liability
> for the Rust project or its developers or users, or any requirements that
> adversely affect the livelihood or prospects of the Rust project or its
> developers or users.
No dependencies were added to Rust.
> - Neither this policy nor any decisions made regarding targets shall create any
> binding agreement or estoppel by any party. If any member of an approving
> Rust team serves as one of the maintainers of a target, or has any legal or
> employment requirement (explicit or implicit) that might affect their
> decisions regarding a target, they must recuse themselves from any approval
> decisions regarding the target's tier status, though they may otherwise
> participate in discussions.
> - This requirement does not prevent part or all of this policy from being
> cited in an explicit contract or work agreement (e.g. to implement or
> maintain support for a target). This requirement exists to ensure that a
> developer or team responsible for reviewing and approving a target does not
> face any legal threats or obligations that would prevent them from freely
> exercising their judgment in such approval, even if such judgment involves
> subjective matters or goes beyond the letter of these requirements.
Understood.
I am not a member of a Rust team.
> - Tier 3 targets should attempt to implement as much of the standard libraries
> as possible and appropriate (`core` for most targets, `alloc` for targets
> that can support dynamic memory allocation, `std` for targets with an
> operating system or equivalent layer of system-provided functionality), but
> may leave some code unimplemented (either unavailable or stubbed out as
> appropriate), whether because the target makes it impossible to implement or
> challenging to implement. The authors of pull requests are not obligated to
> avoid calling any portions of the standard library on the basis of a tier 3
> target not implementing those portions.
Understood.
`std` is supported.
> - The target must provide documentation for the Rust community explaining how
> to build for the target, using cross-compilation if possible. If the target
> supports running binaries, or running tests (even if they do not pass), the
> documentation must explain how to run such binaries or tests for the target,
> using emulation if possible or dedicated hardware if necessary.
Building is described in the platform support doc.
> - Tier 3 targets must not impose burden on the authors of pull requests, or
> other developers in the community, to maintain the target. In particular,
> do not post comments (automated or manual) on a PR that derail or suggest a
> block on the PR based on a tier 3 target. Do not send automated messages or
> notifications (via any medium, including via ``@`)` to a PR author or others
> involved with a PR regarding a tier 3 target, unless they have opted into
> such messages.
> - Backlinks such as those generated by the issue/PR tracker when linking to
> an issue or PR are not considered a violation of this policy, within
> reason. However, such messages (even on a separate repository) must not
> generate notifications to anyone involved with a PR who has not requested
> such notifications.
Understood.
> - Patches adding or updating tier 3 targets must not break any existing tier 2
> or tier 1 target, and must not knowingly break another tier 3 target without
> approval of either the compiler team or the maintainers of the other tier 3
> target.
> - In particular, this may come up when working on closely related targets,
> such as variations of the same architecture with different features. Avoid
> introducing unconditional uses of features that another variation of the
> target may not have; use conditional compilation or runtime detection, as
> appropriate, to let each target run code supported by that target.
I don't think this PR breaks anything.
r? compiler-team
This section name is always constant for a given target, but obtaining it from
LLVM requires a few intermediate allocations. There's no need to do so
repeatedly from inside a per-function loop.
Reuse `codegen_ssa` monomorphization errors in `codegen_gcc`
Removes monomorphization errors duplication by reusing the ones defined in `codegen_ssa`.
Also updates `expected_simd` errors usage in `codegen_gcc` by assuming we want to treat those parameters as translatable. See 7a888fb56e
This option guards the logic of writing long type names in files and
instead using short forms in error messages in rustc_middle/ty/error
behind a flag. The main motivation for this change is to disable this
behaviour when running ui tests.
This logic can be triggered by running tests in a directory that has a
long enough path, e.g. /my/very-long-path/where/rust-codebase/exists/
This means ui tests can fail depending on how long the path to their
file is.
Some ui tests actually rely on this behaviour for their assertions,
so for those we enable the flag manually.
These pre-link args are remains from Hermit's old C version.
We don't need them and we have no reason to override the defaults here.
See ld [1] for details.
[1]: https://sourceware.org/binutils/docs/ld/Options.html
Signed-off-by: Martin Kröning <martin.kroening@eonerc.rwth-aachen.de>
Per #112156, using `&` in `format!` may cause a small perf delay, so I tried to clean up one module at a time format usage. This PR includes a few removals of the ref in format (they do compile locally without the ref), as well as a few format inlining for consistency.
Per #112156, using `&` in `format!` may cause a small perf delay, so I tried to clean up one module at a time format usage. This PR includes a few removals of the ref in format (they do compile locally without the ref), as well as a few format inlining for consistency.
GCC uses the `-fshort-enums` ABI for arm-none and the `int`-sized enum
ABI for arm-linux.
Clang uses the `int`-sized enum ABI for all arm targets.
Both options are permitted by AAPCS.
Rust is matching GCC's behavior for these targets, as interop with code
code compiled by GCC is desirable in the bare-metal context. See #87917.
Fix #[inline(always)] on closures with target feature 1.1
Fixes#108655. I think this is the most obvious solution that isn't overly complicated. The comment includes more justification, but I think this is likely better than demoting the `#[inline(always)]` to `#[inline]`, since existing code is unaffected.
Support interpolated block for `try` and `async`
I'm putting this up for T-lang discussion, to decide whether or not they feel like this should be supported. This was raised in #112952, which surprised me. There doesn't seem to be a *technical* reason why we don't support this.
### Precedent:
This is supported:
```rust
macro_rules! always {
($block:block) => {
if true $block
}
}
fn main() {
always!({});
}
```
### Counterpoint:
However, for context, this is *not* supported:
```rust
macro_rules! unsafe_block {
($block:block) => {
unsafe $block
}
}
fn main() {
unsafe_block!({});
}
```
If this support for `async` and `try` with interpolated blocks is *not* desirable, then I can convert them to instead the same diagnostic as `unsafe $block` and make this situation a lot less ambiguous.
----
I'll try to write up more before T-lang triage on Tuesday. I couldn't find anything other than #69760 for why something like `unsafe $block` is not supported, and even that PR doesn't have much information.
Fixes#112952
Remove Scope::Elision from bound-vars resolution.
This scope is a remnant of HIR-based lifetime resolution.
It's only role was to ensure that object lifetime resolution falled back to `'static`. This can be done using `ObjectLifetimeDefault` scope.
Get rid of subst-relate incompleteness in new solver
We shouldn't need subst-relate if we have bidirectional-normalizes-to in the new solver.
The only potential issue may happen if we have an unconstrained projection like `<Wrapper<?0> as Trait>::Assoc == <Wrapper<T> as Trait>::Assoc` where they both normalize to something that doesn't mention any substs, which would possibly prefer `?0 = T` if we fall back to subst-relate. But I'd prefer if we remove incompleteness until we can determine some case where we need them, and the bidirectional-normalizes-to seems better to have in general.
I can update https://github.com/rust-lang/trait-system-refactor-initiative/issues/26 and https://github.com/rust-lang/trait-system-refactor-initiative/issues/25 once this lands.
r? `@lcnr`
Tweak spans for self arg, fix borrow suggestion for signature mismatch
1. Adjust a suggestion message that was annoying me
2. Fix#112503 by recording the right spans for the `self` part of the `&self` 0th argument
3. Remove the suggestion for adjusting a trait signature on type mismatch, bc that's gonna probably break all the other impls of the trait even if it fixes its one usage 😅
Reuse the MIR validator for MIR inlining
Instead of having the inliner home-cook its own validation, we just check that the substituted MIR body passes the regular validation.
The MIR validation is first split in two: control flow validation (MIR syntax and CFG invariants) and type validation (subtyping relationship in assignments and projections). Only the latter can be affected by instantiating type parameters.
[RFC] Support `.comment` section like GCC/Clang (`!llvm.ident`)
Both GCC and Clang write by default a `.comment` section with compiler information:
```txt
$ gcc -c -xc /dev/null && readelf -p '.comment' null.o
String dump of section '.comment':
[ 1] GCC: (GNU) 11.2.0
$ clang -c -xc /dev/null && readelf -p '.comment' null.o
String dump of section '.comment':
[ 1] clang version 14.0.1 (https://github.com/llvm/llvm-project.git c62053979489ccb002efe411c3af059addcb5d7d)
```
They also implement the `-Qn` flag to avoid doing so:
```txt
$ gcc -Qn -c -xc /dev/null && readelf -p '.comment' null.o
readelf: Warning: Section '.comment' was not dumped because it does not exist!
$ clang -Qn -c -xc /dev/null && readelf -p '.comment' null.o
readelf: Warning: Section '.comment' was not dumped because it does not exist!
```
So far, `rustc` only does it for WebAssembly targets and only when debug info is enabled:
```txt
$ echo 'fn main(){}' | rustc --target=wasm32-unknown-unknown --emit=llvm-ir -Cdebuginfo=2 - && grep llvm.ident rust_out.ll
!llvm.ident = !{!27}
```
The RFC part of this PR is about which behavior should `rustc` follow:
- Always add it.
- Add it by default, i.e. have an opt-out flag (GCC, Clang).
- Have an opt-in flag.
- Never add it (current).
There is also the question of whether debug info being enabled matters for that decision, given the current behavior of WebAssembly targets.
For instance, adding it by default gets us closer to other popular compilers, but that may surprise some users with an information leak. The most conservative option is to only do so opt-in, even if debug info is enabled (some users may be stripping debug info and not expecting something else to be leaked elsewhere).
Implementation-wise, this covers both `ModuleLlvm::new()` and `ModuleLlvm::new_metadata()` cases by moving the addition to `context::create_module` and adds a few test cases.
ThinLTO also sees the `llvm.ident` named metadata duplicated (in temporary outputs), so this deduplicates it like it is done for `wasm.custom_sections`. The tests also check this duplication does not take place.
Both GCC and Clang write by default a `.comment` section with compiler
information:
```txt
$ gcc -c -xc /dev/null && readelf -p '.comment' null.o
String dump of section '.comment':
[ 1] GCC: (GNU) 11.2.0
$ clang -c -xc /dev/null && readelf -p '.comment' null.o
String dump of section '.comment':
[ 1] clang version 14.0.1 (https://github.com/llvm/llvm-project.git c62053979489ccb002efe411c3af059addcb5d7d)
```
They also implement the `-Qn` flag to avoid doing so:
```txt
$ gcc -Qn -c -xc /dev/null && readelf -p '.comment' null.o
readelf: Warning: Section '.comment' was not dumped because it does not exist!
$ clang -Qn -c -xc /dev/null && readelf -p '.comment' null.o
readelf: Warning: Section '.comment' was not dumped because it does not exist!
```
So far, `rustc` only does it for WebAssembly targets and only
when debug info is enabled:
```txt
$ echo 'fn main(){}' | rustc --target=wasm32-unknown-unknown --emit=llvm-ir -Cdebuginfo=2 - && grep llvm.ident rust_out.ll
!llvm.ident = !{!27}
```
In the RFC part of this PR it was decided to always add
the information, which gets us closer to other popular compilers.
An opt-out flag like GCC and Clang may be added later on if deemed
necessary.
Implementation-wise, this covers both `ModuleLlvm::new()` and
`ModuleLlvm::new_metadata()` cases by moving the addition to
`context::create_module` and adds a few test cases.
ThinLTO also sees the `llvm.ident` named metadata duplicated (in
temporary outputs), so this deduplicates it like it is done for
`wasm.custom_sections`. The tests also check this duplication does
not take place.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
clarify MIR uninit vs LLVM undef/poison
In [this LLVM discussion](https://discourse.llvm.org/t/rfc-load-instruction-uninitialized-memory-semantics/67481) I learned that mapping our uninitialized memory in MIR to poison in LLVM would be quite problematic due to the lack of a byte type. I am not sure where to write down this insight but this seems like a reasonable start.
Rollup of 4 pull requests
Successful merges:
- #113887 (new solver: add a separate cache for coherence)
- #113910 (Add FnPtr ty to SMIR)
- #113913 (error/E0691: include alignment in error message)
- #113914 (rustc_target: drop duplicate code)
r? `@ghost`
`@rustbot` modify labels: rollup
rustc_target: drop duplicate code
Drop duplicate helper methods on `Layout`, which are already implemented on `LayoutS`. Note that `Layout` has a `Deref` implementation to `LayoutS`, so all accessors are automatically redirected.
The methods are identical and have been copied to `rustc_abi` in:
commit 390a637e29
Author: hamidreza kalbasi <hamidrezakalbasi@protonmail.com>
Date: Mon Nov 7 00:36:11 2022 +0330
move things from rustc_target::abi to rustc_abi
This commit left behind the original implementation. Drop it now.
(originally moved by ``@HKalbasi)``
error/E0691: include alignment in error message
Include the computed alignment of the violating field when rejecting transparent types with non-trivially aligned ZSTs.
ZST member fields in transparent types must have an alignment of 1 (to ensure it does not raise the layout requirements of the transparent field). The current error message looks like this:
```text
LL | struct Foobar(u32, [u32; 0]);
| ^^^^^^^^ has alignment larger than 1
```
This patch changes the report to include the alignment of the violating field:
```text
LL | struct Foobar(u32, [u32; 0]);
| ^^^^^^^^ has alignment of 4, which is larger than 1
```
In case of unknown alignments, it will yield:
```text
LL | struct Foobar(u32, [u32; 0]);
| ^^^^^^^^ may have alignment larger than 1
```
This allows developers to get a better grasp why a specific field is rejected. Knowing the alignment of the violating field makes it easier to judge where that alignment-requirement originates, and thus hopefully provide better hints on how to mitigate the problem.
This idea was proposed in 2022 in #98071 as part of a bigger change. This commit simply extracts this error-message change, to decouple it from the other diagnostic improvements.
(Originally proposed by `@compiler-errors` in #98071)
Prototype: Add unstable `-Z reference-niches` option
MCP: rust-lang/compiler-team#641
Relevant RFC: rust-lang/rfcs#3204
This prototype adds a new `-Z reference-niches` option, controlling the range of valid bit-patterns for reference types (`&T` and `&mut T`), thereby enabling new enum niching opportunities. Like `-Z randomize-layout`, this setting is crate-local; as such, references to built-in types (primitives, tuples, ...) are not affected.
The possible settings are (here, `MAX` denotes the all-1 bit-pattern):
| `-Z reference-niches=` | Valid range |
|:---:|:---:|
| `null` (the default) | `1..=MAX` |
| `size` | `1..=(MAX- size)` |
| `align` | `align..=MAX.align_down_to(align)` |
| `size,align` | `align..=(MAX-size).align_down_to(align)` |
------
This is very WIP, and I'm not sure the approach I've taken here is the best one, but stage 1 tests pass locally; I believe this is in a good enough state to unleash this upon unsuspecting 3rd-party code, and see what breaks.
Now that this lint runs on any external-ABI fn-ptr, normalization won't
always succeed, so use `try_normalize_erasing_regions` instead.
Signed-off-by: David Wood <david@davidtw.co>
Still more complexity, but this allows computing exact `NaiveLayout`s
for null-optimized enums, and thus allows calls like
`transmute::<Option<&T>, &U>()` to work in generic contexts.
avoid clone path prefix when lowering to hir
Found this while trying to parallelize `lower_to_hir`.
When lowering to hir, `Nested` paths in `ast` will be split and the prefix segments will be cloned. This could be omited, since the only consequence is that the prefix segments in `Path`s in hir will have the same `HirId`s, and it seems harmless.
This simplifies the process of lowering to hir and avoids re-modification of `ResolverAstLowering`.
r? `@Aaron1011`
cc #99292
Substitute types before checking inlining compatibility.
Addresses https://github.com/rust-lang/rust/issues/112332 and https://github.com/rust-lang/rust/issues/113781
I don't have a minimal test, but I this seems to remove the ICE locally.
This whole pre-inlining validation mirrors the "real" MIR validation pass to verify that inlined MIR will still pass validation.
The debuginfo loop is added because MIR validation check projections in debuginfo.
Likewise, MIR validation only checks `is_subtype`, so there is no reason for a stronger check.
The types were not being substituted in `check_equal`, so we were not bailing out of inlining if the substituted MIR callee body would not pass validation.
Include the computed alignment of the violating field when rejecting
transparent types with non-trivially aligned ZSTs.
ZST member fields in transparent types must have an alignment of 1 (to
ensure it does not raise the layout requirements of the transparent
field). The current error message looks like this:
LL | struct Foobar(u32, [u32; 0]);
| ^^^^^^^^ has alignment larger than 1
This patch changes the report to include the alignment of the violating
field:
LL | struct Foobar(u32, [u32; 0]);
| ^^^^^^^^ has alignment of 4, which is larger than 1
In case of unknown alignments, it will yield:
LL | struct Foobar<T>(u32, [T; 0]);
| ^^^^^^ may have alignment larger than 1
This allows developers to get a better grasp why a specific field is
rejected. Knowing the alignment of the violating field makes it easier
to judge where that alignment-requirement originates, and thus hopefully
provide better hints on how to mitigate the problem.
This idea was proposed in 2022 in #98071 as part of a bigger change.
This commit simply extracts this error-message change, to decouple it
from the other diagnostic improvements.
Drop duplicate helper methods on `Layout`, which are already implemented
on `LayoutS`. Note that `Layout` has a `Deref` implementation to
`LayoutS`, so all accessors are automatically redirected.
The methods are identical and have been copied to `rustc_abi` in:
commit 390a637e29
Author: hamidreza kalbasi <hamidrezakalbasi@protonmail.com>
Date: Mon Nov 7 00:36:11 2022 +0330
move things from rustc_target::abi to rustc_abi
This commit left behind the original implementation. Drop it now.
Signed-off-by: David Rheinsberg <david@readahead.eu>
Use SHA256 source file checksums by default when targeting MSVC
Currently, when targeting Windows (more specifically, the MSVC toolchain), Rust will use SHA1 source file checksums by default. SHA1 has been superseded by SHA256, and Microsoft recommends migrating to SHA256.
As of Visual Studio 2022, MSVC defaults to SHA256. This change aligns Rust and MSVC.
LLVM can already use SHA256 checksums, so this does not require any change to LLVM.
MSVC docs on source file checksums: https://learn.microsoft.com/en-us/cpp/build/reference/zh?view=msvc-170
Support `--print KIND=PATH` command line syntax
As is already done for `--emit KIND=PATH` and `-L KIND=PATH`.
In the discussion of #110785, it was pointed out that `--print KIND=PATH` is nicer than trying to apply the single global `-o` path to `--print`'s output, because in general there can be multiple print requests within a single rustc invocation, and anyway `-o` would already be used for a different meaning in the case of `link-args` and `native-static-libs`.
I am interested in using `--print cfg=PATH` in Buck2. Currently Buck2 works around the lack of support for `--print KIND=PATH` by [indirecting through a Python wrapper script](d43cf3a51a/prelude/rust/tools/get_rustc_cfg.py) to redirect rustc's stdout into the location dictated by the build system.
From skimming Cargo's usages of `--print`, it definitely seems like it would benefit from `--print KIND=PATH` too. Currently it is working around the lack of this by inserting `--crate-name=___ --print=crate-name` so that it can look for a line containing `___` as a delimiter between the 2 other `--print` informations it actually cares about. This is commented as a "HACK" and "abuse". 31eda6f7c3/src/cargo/core/compiler/build_context/target_info.rs (L242) (FYI `@weihanglo` as you dealt with this recently in https://github.com/rust-lang/cargo/pull/11633.)
Mentioning reviewers active in #110785: `@fee1-dead` `@jyn514` `@bjorn3`
