Rollup of 6 pull requests
Successful merges:
- #95395 (Better error message for `_` in function signature in `impl Trait for Ty`)
- #96090 (Implement MIR opt unit tests)
- #96107 ([test] Add test cases for untested functions for VecDeque)
- #96212 (Use revisions instead of nll compare mode for `/regions/` ui tests)
- #96215 (Drop support for legacy PM with LLVM 15)
- #96366 (bootstrap: Remove dead code in rustdoc shim)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Drop support for legacy PM with LLVM 15
LLVM 15 already removes some of the legacy PM APIs we're using. This patch forces use of NewPM with LLVM 15 (with `-Z new-llvm-pass-manager=no` throwing a warning) and stubs out various FFI methods with a report_fatal_error on LLVM 15.
For LLVMPassManagerBuilderPopulateLTOPassManager() I went with adding our own wrapper, as the alternative would be to muck about with weak symbols, which seems to be non-trivial as far as cross-platform support is concerned (std has `weak!` for this purpose, but only as an internal utility.)
Fixes#96072.
Fixes#96362.
[test] Add test cases for untested functions for VecDeque
Added test cases of the following functions
- get
- get_mut
- swap
- reserve_exact
- try_reserve_exact
- try_reserve
- contains
- rotate_left
- rotate_right
- binary_search
- binary_search_by
- binary_search_by_key
Implement MIR opt unit tests
This implements rust-lang/compiler-team#502 .
There's not much to say here, this implementation does everything as proposed. I also added the flag to a bunch of existing tests (mostly those to which I could add it without causing huge diffs due to changes in line numbers). Summarizing the changes to test outputs:
- Every time an `MirPatch` is created, it adds a cleanup block to the body if it did not exist already. If this block is unused (as is usually the case), it usually gets removed soon after by some pass calling `SimplifyCFG` for unrelated reasons (in many cases this cycle happens quite a few times for a single body). We now run `SimplifyCFG` less often, so those blocks end up in some of our outputs. I looked at changing `MirPatch` to not do this, but that seemed too complicated for this PR. I may still do that in a follow-up.
- The `InstCombine` test had set `-C opt-level=0` in its flags and so there were no storage markers. I don't really see a good motivation for doing this, so bringing it back in line with what everything else does seems correct.
- One of the `EarlyOtherwiseBranch` tests had `UnreachableProp` running on it. Preventing that kind of thing is the goal of this feature, so this seems fine.
For the remaining tests for which this feature might be useful, we can gradually migrate them as opportunities present themselves.
In terms of documentation, I plan on submitting a PR to the rustc dev guide in the near future documenting this and other recent changes to MIR. If there's any other places to update, do let me know
r? `@nagisa`
Better error message for `_` in function signature in `impl Trait for Ty`
Provides a replacement suggestion for when `_` is present in the function signature for `impl Trait for Ty`, using the substitutions from the trait to compute the exact type.
Fixes#95097
Improve span for `consider adding an explicit lifetime bound` suggestions under NLL
Because NLL borrowck is run after typeck, `in_progress_typeck_results` was always `None` which was preventing the retrieval of the span to which the suggestion is suppose to add the lifetime bound.
We now manually pass the `LocalDefId` owner to `construct_generic_bound_failure` so that under NLL, we give the owner id of the current body.
This helps with #96332
Improve bootstrap tests
- Don't checkout submodules in bootstrap tests
This doesn't cause any tests to fail, and can greatly speed them up.
- Add a test for --exclude test::XXX
I didn't know that the `test::` syntax was valid before, and it doesn't seem to be documented anywhere. Add a test so it doesn't regress accidentally, and as executable documentation.
This also moves the `exclude` tests out of `dist`, to avoid assertion errors when the `cmd` passed to configure didn't match the `subcommand` used.
- Use run_build helper consistently across most bootstrap tests
This is not super important to do, but the consistency is nice.
I didn't change any tests that call `configure("dist")` and then override the subcommand - doing
that at all is pretty sketchy, but I don't want to mess with it while already doing a refactor.
Found while working on the "one call to Step for all paths" change mentioned in https://github.com/rust-lang/rust/pull/95503#issuecomment-1105914384, but independent of that work.
cc `@pietroalbini` for the `--exclude` test, git blame says you added support for it originally.
Add `x {check,build,doc} {compiler,library}` aliases.
While working on https://github.com/rust-lang/rust/pull/95503, I realized that it will interfere with existing command lines:
Currently people run `x build library/std` expecting it to "add all library crates to the sysroot",
but after that change, it will *only* build `libstd` and its dependencies (and add them to the sysroot), not libtest or libproc_macro.
That will work for local testing in most cases, but could be confusing. Even if not, though, I think `x build library` is more clear about what actually happens than the current `x build library/std`.
The intended end goal is something like:
- For check/build/doc, we have library + compiler aliases, which correspond to basically "most possible" for that piece. This is the intended path of entry (rather than library/test or similar as today) for when you just want the thing to work -- for example, getting a compiler that is "crates.io-compatible" would be roughly `x.py build library`). #95504
- Specific crate invocations build up to that crate, which means that if you don't care about tests you probably want x.py build library/proc_macro or library/std for faster build times. #95503
Note that this is already implemented today for the `doc` command and seems to work pretty well in practice.
I plan to change the dev-guide and various instructions in the README to `build library` once this is merged.
`@rustbot` label +A-rustbuild
make `classify_drop_access_kind` iterate
This PR:
1. fixes the FIXME of `classify_drop_access_kind` func in the borrowck part. The process of obtaining `StorageDeadOrDrop` has been changed from recursive to iterative.
2. gets `place_ty` in each iteration, avoid repeatedly getting the `ty` of the same place (O(n^2) => O(n))
Because NLL borrowck is run after typeck, `in_progress_typeck_results`
was always `None` which was preventing the retrieval of the span to which
the suggestion is suppose to add the lifetime bound.
We now manually pass the `LocalDefId` owner to `construct_generic_bound_failure`
so that under NLL, we give the owner id of the current body.
Add support for `nounused` --extern flag
This adds `nounused` to the set of extern flags:
`--extern nounused:core=/path/to/core/libcore.rlib`.
The effect of this flag is to suppress `unused-crate-dependencies`
warnings relating to the crate.
This adds `nounused` to the set of extern flags:
`--extern nounused:core=/path/to/core/libcore.rlib`.
The effect of this flag is to suppress `unused-crate-dependencies`
warnings relating to the crate.
Optimize `const_prop` mir-opt by accessing `local_decls` through `ecx`
From the FIXME in the impl of `ConstPropagator`. Accessing `local_decls` and `scource_scopes` from `ecx` can reduce `clone` calls and save compile time.
Besides, according to #96213 , the FIXME about writing `layouts` to `ecx` in advance can also be removed.
Remove visibility information from HIR
The resolver exports all the necessary visibility information through the `tcx.visibility` query.
This PR stops having a dedicated visibility field in HIR, in order to use this query.
We keep a `vis_span` field for diagnostic purposes.
Unstably constify `impl<I: Iterator> IntoIterator for I`
This constifies the default `IntoIterator` implementation under the `const_intoiterator_identity` feature.
Tracking Issue: #90603
No "weird" floats in const fn {from,to}_bits
I suspect this code is subtly incorrect and that we don't even e.g. use x87-style floats in CTFE, so I don't have to guard against that case. A future PR will be hopefully removing them from concern entirely, anyways. But at the moment I wanted to get this rolling because small questions like that one seem best answered by review.
r? `@oli-obk`
cc `@eddyb` `@thomcc`
Sync rustc_codegen_cranelift
Mostly fixing bugs this time, but also a Cranelift update.
r? `@ghost`
`@rustbot` label +A-codegen +A-cranelift +T-compiler
debuginfo: Emit ZST struct debuginfo for unit type when CPP-like debuginfo is enabled
As already discovered in 24a728a8eb, PDB does not play well with custom basic types. This PR extends to the fix to `()`: Instead of a custom basic type, we treat it like an empty tuple (i.e. it is described as a struct which happens to have no fields).
Before this change anything with a `()` in it would cause trouble, which is especially bad for `*const ()` and `*mut ()` which are often used for opaque pointers. E.g. the test case added in this PR would look like:
```
0:000> dx _ref
Error: Unable to bind name '_ref'
0:000> dx _ptr
Error: Unable to bind name '_ptr'
0:000> dx _local
Error: Unable to bind name '_local'
0:000> dx _field,d
_field,d [Type: unit_type::_TypeContainingUnitField]
[+0x008] _a : 123 [Type: unsigned int]
[+0x000] _unit : Unexpected failure to dereference object
[+0x000] _b : 456 [Type: unsigned __int64]
0:000> dx ((__int64 *)_ptr),x
Error: Unable to bind name '_ptr'
```
With the PR it produces the expected output:
```
0:000> dx _ref
_ref : 0x7ff6f2012230 : () [Type: tuple$<> *]
0:000> dx _ptr
_ptr : 0x7e8ddffc20 : () [Type: tuple$<> *]
0:000> dx _local
_local : () [Type: tuple$<>]
0:000> dx _field,d
_field,d [Type: unit_type::_TypeContainingUnitField]
[+0x008] _a : 123 [Type: unsigned int]
[+0x000] _unit : () [Type: tuple$<>]
[+0x000] _b : 456 [Type: unsigned __int64]
0:000> dx ((__int64 *)_ptr),x
((__int64 *)_ptr),x : 0x7e8ddffc20 : 0x1122334455667788 [Type: __int64 *]
```
r? `@wesleywiser`
Reduce allocations for path conversions on Windows
Previously, UTF-8 to UTF-16 Path conversions on Windows unnecessarily allocate twice, as described in #96297. This commit fixes that issue.
Improve Windows path prefix parsing
This PR fixes improves parsing of Windows path prefixes. `parse_prefix` now supports both types of separators on Windows (`/` and `\`).
