By splitting the `FnSig` within `TyKind::FnPtr` into `FnSigTys` and
`FnHeader`, which can be packed more efficiently. This reduces the size
of the hot `TyKind` type from 32 bytes to 24 bytes on 64-bit platforms.
This reduces peak memory usage by a few percent on some benchmarks. It
also reduces cache misses and page faults similarly, though this doesn't
translate to clear cycles or wall-time improvements on CI.
Pass the right `ParamEnv` to `might_permit_raw_init_strict`
Fixes#119620
`might_permit_raw_init_strict` currently passes an empty `ParamEnv` to the `InterpCx`, instead of the actual `ParamEnv` that was passed in to `check_validity_requirement` at callsite.
This leads to ICEs such as the linked issue where for `UnsafeCell<*mut T>` we initially get the layout with the right `ParamEnv` (which suceeds because it can prove that `T: Sized` and therefore `UnsafeCell<*mut T>` has a known layout) but then do the rest with an empty `ParamEnv` where `T: Sized` is not known to hold so getting the layout for `*mut T` later fails.
This runs into an assertion in other layout code where it's making the (valid) assumption that, when we already have a layout for a struct (`UnsafeCell<*mut T>`), getting the layout of one of its fields (`*mut T`) should also succeed, which wasn't the case here due to using the wrong `ParamEnv`.
So, this PR changes it to just use the same `ParamEnv` all the way throughout.
MIR required_consts, mentioned_items: ensure we do not forget to fill these lists
Bodies initially get created with empty required_consts and mentioned_items, but at some point those should be filled. Make sure we notice when that is forgotten.
raw_eq: using it on bytes with provenance is not UB (outside const-eval)
The current behavior of raw_eq violates provenance monotonicity. See https://github.com/rust-lang/rust/pull/124921 for an explanation of provenance monotonicity. It is violated in raw_eq because comparing bytes without provenance is well-defined, but adding provenance makes the operation UB.
So remove the no-provenance requirement from raw_eq. However, the requirement stays in-place for compile-time invocations of raw_eq, that indeed cannot deal with provenance.
Cc `@rust-lang/opsem`
miri: fix offset_from behavior on wildcard pointers
offset_from wouldn't behave correctly when the "end" pointer was a wildcard pointer (result of an int2ptr cast) just at the end of the allocation. Fix that by expressing the "same allocation" check in terms of two `check_ptr_access_signed` instead of something specific to offset_from, which is both more canonical and works better with wildcard pointers.
The second commit just improves diagnostics: I wanted the "pointer is dangling (has no provenance)" message to say how many bytes of memory it expected to see (since if it were 0 bytes, this would actually be legal, so it's good to tell the user that it's not 0 bytes). And then I was annoying that the error looks so different for when you deref a dangling pointer vs an out-of-bounds pointer so I made them more similar.
Fixes https://github.com/rust-lang/miri/issues/3767
Use `#[rustfmt::skip]` on some `use` groups to prevent reordering.
`use` declarations will be reformatted in #125443. Very rarely, there is a desire to force a group of `use` declarations together in a way that auto-formatting will break up. E.g. when you want a single comment to apply to a group. #126776 dealt with all of these in the codebase, ensuring that no comments intended for multiple `use` declarations would end up in the wrong place. But some people were unhappy with it.
This commit uses `#[rustfmt::skip]` to create these custom `use` groups in an idiomatic way for a few of the cases changed in #126776. This works because rustfmt treats any `use` item annotated with `#[rustfmt::skip]` as a barrier and won't reorder other `use` items around it.
r? `@cuviper`
interpret: add sanity check in dyn upcast to double-check what codegen does
For dyn receiver calls, we already have two codepaths: look up the function to call by indexing into the vtable, or alternatively resolve the DefId given the dynamic type of the receiver. With debug assertions enabled, the interpreter does both and compares the results. (Without debug assertions we always use the vtable as it is simpler.)
This PR does the same for dyn trait upcasts. However, for casts *not* using the vtable is the easier thing to do, so now the vtable path is the debug-assertion-only path. In particular, there are cases where the vtable does not contain a pointer for upcasts but instead reuses the old pointer: when the supertrait vtable is a prefix of the larger vtable. We don't want to expose this optimization and detect UB if people do a transmute assuming this optimization, so we cannot in general use the vtable indexing path.
r? ``@oli-obk``
`use` declarations will be reformatted in #125443. Very rarely, there is
a desire to force a group of `use` declarations together in a way that
auto-formatting will break up. E.g. when you want a single comment to
apply to a group. #126776 dealt with all of these in the codebase,
ensuring that no comments intended for multiple `use` declarations would
end up in the wrong place. But some people were unhappy with it.
This commit uses `#[rustfmt::skip]` to create these custom `use` groups
in an idiomatic way for a few of the cases changed in #126776. This
works because rustfmt treats any `use` item annotated with
`#[rustfmt::skip]` as a barrier and won't reorder other `use` items
around it.
Clean up more comments near use declarations
#125443 will reformat all use declarations in the repository. There are a few edge cases involving comments on use declarations that require care. This PR fixes them up so #125443 can go ahead with a simple `x fmt --all`. A follow-up to #126717.
r? ``@cuviper``
There are some comments describing multiple subsequent `use` items. When
the big `use` reformatting happens some of these `use` items will be
reordered, possibly moving them away from the comment. With this
additional level of formatting it's not really feasible to have comments
of this type. This commit removes them in various ways:
- merging separate `use` items when appropriate;
- inserting blank lines between the comment and the first `use` item;
- outright deletion (for comments that are relatively low-value);
- adding a separate "top-level" comment.
We also entirely skip formatting for four library files that contain
nothing but `pub use` re-exports, where reordering would be painful.
offset_from: always allow pointers to point to the same address
This PR implements the last remaining part of the t-opsem consensus in https://github.com/rust-lang/unsafe-code-guidelines/issues/472: always permits offset_from when both pointers have the same address, no matter how they are computed. This is required to achieve *provenance monotonicity*.
Tracking issue: https://github.com/rust-lang/rust/issues/117945
### What is provenance monotonicity and why does it matter?
Provenance monotonicity is the property that adding arbitrary provenance to any no-provenance pointer must never make the program UB. More specifically, in the program state, data in memory is stored as a sequence of [abstract bytes](https://rust-lang.github.io/unsafe-code-guidelines/glossary.html#abstract-byte), where each byte can optionally carry provenance. When a pointer is stored in memory, all of the bytes it is stored in carry that provenance. Provenance monotonicity means: if we take some byte that does not have provenance, and give it some arbitrary provenance, then that cannot change program behavior or introduce UB into a UB-free program.
We care about provenance monotonicity because we want to allow the optimizer to remove provenance-stripping operations. Removing a provenance-stripping operation effectively means the program after the optimization has provenance where the program before the optimization did not -- since the provenance removal does not happen in the optimized program. IOW, the compiler transformation added provenance to previously provenance-free bytes. This is exactly what provenance monotonicity lets us do.
We care about removing provenance-stripping operations because `*ptr = *ptr` is, in general, (likely) a provenance-stripping operation. Specifically, consider `ptr: *mut usize` (or any integer type), and imagine the data at `*ptr` is actually a pointer (i.e., we are type-punning between pointers and integers). Then `*ptr` on the right-hand side evaluates to the data in memory *without* any provenance (because [integers do not have provenance](https://rust-lang.github.io/rfcs/3559-rust-has-provenance.html#integers-do-not-have-provenance)). Storing that back to `*ptr` means that the abstract bytes `ptr` points to are the same as before, except their provenance is now gone. This makes `*ptr = *ptr` a provenance-stripping operation (Here we assume `*ptr` is fully initialized. If it is not initialized, evaluating `*ptr` to a value is UB, so removing `*ptr = *ptr` is trivially correct.)
### What does `offset_from` have to do with provenance monotonicity?
With `ptr = without_provenance(N)`, `ptr.offset_from(ptr)` is always well-defined and returns 0. By provenance monotonicity, I can now add provenance to the two arguments of `offset_from` and it must still be well-defined. Crucially, I can add *different* provenance to the two arguments, and it must still be well-defined. In other words, this must always be allowed: `ptr1.with_addr(N).offset_from(ptr2.with_addr(N))` (and it returns 0). But the current spec for `offset_from` says that the two pointers must either both be derived from an integer or both be derived from the same allocation, which is not in general true for arbitrary `ptr1`, `ptr2`.
To obtain provenance monotonicity, this PR hence changes the spec for offset_from to say that if both pointers have the same address, the function is always well-defined.
### What further consequences does this have?
It means the compiler can no longer transform `end2 = begin.offset(end.offset_from(begin))` into `end2 = end`. However, it can still be transformed into `end2 = begin.with_addr(end.addr())`, which later parts of the backend (when provenance has been erased) can trivially turn into `end2 = end`.
The only alternative I am aware of is a fundamentally different handling of zero-sized accesses, where a "no provenance" pointer is not allowed to do zero-sized accesses and instead we have a special provenance that indicates "may be used for zero-sized accesses (and nothing else)". `offset` and `offset_from` would then always be UB on a "no provenance" pointer, and permit zero-sized offsets on a "zero-sized provenance" pointer. This achieves provenance monotonicity. That is, however, a breaking change as it contradicts what we landed in https://github.com/rust-lang/rust/pull/117329. It's also a whole bunch of extra UB, which doesn't seem worth it just to achieve that transformation.
### What about the backend?
LLVM currently doesn't have an intrinsic for pointer difference, so we anyway cast to integer and subtract there. That's never UB so it is compatible with any relaxation we may want to apply.
If LLVM gets a `ptrsub` in the future, then plausibly it will be consistent with `ptradd` and [consider two equal pointers to be inbounds](https://github.com/rust-lang/rust/pull/124921#issuecomment-2205795829).
Support tail calls in mir via `TerminatorKind::TailCall`
This is one of the interesting bits in tail call implementation — MIR support.
This adds a new `TerminatorKind` which represents a tail call:
```rust
TailCall {
func: Operand<'tcx>,
args: Vec<Operand<'tcx>>,
fn_span: Span,
},
```
*Structurally* this is very similar to a normal `Call` but is missing a few fields:
- `destination` — tail calls don't write to destination, instead they pass caller's destination to the callee (such that eventual `return` will write to the caller of the function that used tail call)
- `target` — similarly to `destination` tail calls pass the caller's return address to the callee, so there is nothing to do
- `unwind` — I _think_ this is applicable too, although it's a bit confusing
- `call_source` — `become` forbids operators and is not created as a lowering of something else; tail calls always come from HIR (at least for now)
It might be helpful to read the interpreter implementation to understand what `TailCall` means exactly, although I've tried documenting it too.
-----
There are a few `FIXME`-questions still left, ideally we'd be able to answer them during review ':)
-----
r? `@oli-obk`
cc `@scottmcm` `@DrMeepster` `@JakobDegen`
offset_from, offset: clearly separate safety requirements the user needs to prove from corollaries that automatically follow
By landing https://github.com/rust-lang/rust/pull/116675 we decided that objects larger than `isize::MAX` cannot exist in the address space of a Rust program, which lets us simplify these rules.
For `offset_from`, we can even state that the *absolute* distance fits into an `isize`, and therefore exclude `isize::MIN`. This PR also changes Miri to treat an `isize::MIN` difference like the other isize-overflowing cases.
Miri function identity hack: account for possible inlining
Having a non-lifetime generic is not the only reason a function can be duplicated. Another possibility is that the function may be eligible for cross-crate inlining. So also take into account the inlining attribute in this Miri hack for function pointer identity.
That said, `cross_crate_inlinable` will still sometimes return true even for `inline(never)` functions:
- when they are `DefKind::Ctor(..) | DefKind::Closure` -- I assume those cannot be `InlineAttr::Never` anyway?
- when `cross_crate_inline_threshold == InliningThreshold::Always`
so maybe this is still not quite the right criterion to use for function pointer identity.
Re-implement a type-size based limit
r? lcnr
This PR reintroduces the type length limit added in #37789, which was accidentally made practically useless by the caching changes to `Ty::walk` in #72412, which caused the `walk` function to no longer walk over identical elements.
Hitting this length limit is not fatal unless we are in codegen -- so it shouldn't affect passes like the mir inliner which creates potentially very large types (which we observed, for example, when the new trait solver compiles `itertools` in `--release` mode).
This also increases the type length limit from `1048576 == 2 ** 20` to `2 ** 24`, which covers all of the code that can be reached with craterbot-check. Individual crates can increase the length limit further if desired.
Perf regression is mild and I think we should accept it -- reinstating this limit is important for the new trait solver and to make sure we don't accidentally hit more type-size related regressions in the future.
Fixes#125460
Implement new effects desugaring
cc `@rust-lang/project-const-traits.` Will write down notes once I have finished.
* [x] See if we want `T: Tr` to desugar into `T: Tr, T::Effects: Compat<true>`
* [x] Fix ICEs on `type Assoc: ~const Tr` and `type Assoc<T: ~const Tr>`
* [ ] add types and traits to minicore test
* [ ] update rustc-dev-guide
Fixes#119717Fixes#123664Fixes#124857Fixes#126148
Add a tidy rule to check that fluent messages and attrs don't end in `.`
This adds a new dependency on `fluent-parse` to `tidy` -- we already rely on it in rustc so I feel like it's not that big of a deal.
This PR also adjusts many error messages that currently end in `.`; not all of them since I added an `ALLOWLIST`, excluded `rustc_codegen_*` ftl files, and `.teach_note` attributes.
r? ``@estebank`` ``@oli-obk``
`PtrMetadata` doesn't care about `*const`/`*mut`/`&`/`&mut`, so GVN away those casts in its argument.
This includes updating MIR to allow calling PtrMetadata on references too, not just raw pointers. That means that `[T]::len` can be just `_0 = PtrMetadata(_1)`, for example.
# Conflicts:
# tests/mir-opt/pre-codegen/slice_index.slice_get_unchecked_mut_range.PreCodegen.after.panic-abort.mir
# tests/mir-opt/pre-codegen/slice_index.slice_get_unchecked_mut_range.PreCodegen.after.panic-unwind.mir
safe transmute: support non-ZST, variantful, uninhabited enums
Previously, `Tree::from_enum`'s implementation branched into three disjoint cases:
1. enums that uninhabited
2. enums for which all but one variant is uninhabited
3. enums with multiple variants
This branching (incorrectly) did not differentiate between variantful and variantless uninhabited enums. In both cases, we assumed (and asserted) that uninhabited enums are zero-sized types. This assumption is false for enums like:
enum Uninhabited { A(!, u128) }
...which, currently, has the same size as `u128`. This faulty assumption manifested as the ICE reported in #126460.
In this PR, we revise the first case of `Tree::from_enum` to consider only the narrow category of "enums that are uninhabited ZSTs". These enums, whose layouts are described with `Variants::Single { index }`, are special in their layouts otherwise resemble the `!` type and cannot be descended into like typical enums. This first case captures uninhabited enums like:
enum Uninhabited { A(!, !), B(!) }
The second case is revised to consider the broader category of "enums that defer their layout to one of their variants"; i.e., enums whose layouts are described with `Variants::Single { index }` and that do have a variant at `index`. This second case captures uninhabited enums that are not ZSTs, like:
enum Uninhabited { A(!, u128) }
...which represent their variants with `Variants::Single`.
Finally, the third case is revised to cover the broader category of "enums with multiple variants", which captures uninhabited enums like:
enum Uninhabited { A(u8, !), B(!, u32) }
...which represent their variants with `Variants::Multiple`.
This PR also adds a comment requested by ````@RalfJung```` in his review of #126358 to `compiler/rustc_const_eval/src/interpret/discriminant.rs`.
Fixes#126460
r? ````@compiler-errors````
Rename `InstanceDef` -> `InstanceKind`
Renames `InstanceDef` to `InstanceKind`. The `Def` here is confusing, and makes it hard to distinguish `Instance` and `InstanceDef`. `InstanceKind` makes this more obvious, since it's really just describing what *kind* of instance we have.
Not sure if this is large enough to warrant a types team MCP -- it's only 53 files. I don't personally think it does, but happy to write one if anyone disagrees. cc ``@rust-lang/types``
r? types
Rollup of 9 pull requests
Successful merges:
- #125829 (rustc_span: Add conveniences for working with span formats)
- #126361 (Unify intrinsics body handling in StableMIR)
- #126417 (Add `f16` and `f128` inline ASM support for `x86` and `x86-64`)
- #126424 ( Also sort `crt-static` in `--print target-features` output)
- #126428 (Polish `std::path::absolute` documentation.)
- #126429 (Add `f16` and `f128` const eval for binary and unary operationations)
- #126448 (End support for Python 3.8 in tidy)
- #126488 (Use `std::path::absolute` in bootstrap)
- #126511 (.mailmap: Associate both my work and my private email with me)
r? `@ghost`
`@rustbot` modify labels: rollup
Add `f16` and `f128` const eval for binary and unary operationations
Add const evaluation and Miri support for f16 and f128, including unary and binary operations. Casts are not yet included.
Fixes https://github.com/rust-lang/rust/issues/124583
r? ``@RalfJung``
Previously, `Tree::from_enum`'s implementation branched into three disjoint
cases:
1. enums that uninhabited
2. enums for which all but one variant is uninhabited
3. enums with multiple inhabited variants
This branching (incorrectly) did not differentiate between variantful and
variantless uninhabited enums. In both cases, we assumed (and asserted) that
uninhabited enums are zero-sized types. This assumption is false for enums like:
enum Uninhabited { A(!, u128) }
...which, currently, has the same size as `u128`. This faulty assumption
manifested as the ICE reported in #126460.
In this PR, we revise the first case of `Tree::from_enum` to consider only the
narrow category of "enums that are uninhabited ZSTs". These enums, whose layouts
are described with `Variants::Single { index }`, are special in their layouts
otherwise resemble the `!` type and cannot be descended into like typical enums.
This first case captures uninhabited enums like:
enum Uninhabited { A(!, !), B(!) }
The second case is revised to consider the broader category of "enums that defer
their layout to one of their variants"; i.e., enums whose layouts are described
with `Variants::Single { index }` and that do have a variant at `index`. This
second case captures uninhabited enums that are not ZSTs, like:
enum Uninhabited { A(!, u128) }
...which represent their variants with `Variants::Single`.
Finally, the third case is revised to cover the broader category of "enums with
multiple variants", which captures uninhabited, non-ZST enums like:
enum Uninhabited { A(u8, !), B(!, u32) }
...which represent their variants with `Variants::Multiple`.
This PR also adds a comment requested by RalfJung in his review of #126358 to
`compiler/rustc_const_eval/src/interpret/discriminant.rs`.
Fixes#126460
const validation: fix ICE on dangling ZST reference
Fixes https://github.com/rust-lang/rust/issues/126393
I'm not super happy with this fix but I can't think of a better one.
r? `@oli-obk`
safe transmute: support `Single` enums
Previously, the implementation of `Tree::from_enum` incorrectly treated enums with `Variants::Single` and `Variants::Multiple` identically. This is incorrect for `Variants::Single` enums, which delegate their layout to that of a variant with a particular index (or no variant at all if the enum is empty).
This flaw manifested first as an ICE. `Tree::from_enum` attempted to compute the tag of variants other than the one at `Variants::Single`'s `index`, and fell afoul of a sanity-checking assertion in `compiler/rustc_const_eval/src/interpret/discriminant.rs`. This assertion is non-load-bearing, and can be removed; the routine its in is well-behaved even without it.
With the assertion removed, the proximate issue becomes apparent: calling `Tree::from_variant` on a variant that does not exist is ill-defined. A sanity check the given variant has `FieldShapes::Arbitrary` fails, and the analysis is (correctly) aborted with `Err::NotYetSupported`.
This commit corrects this chain of failures by ensuring that `Tree::from_variant` is not called on variants that are, as far as layout is concerned, nonexistent. Specifically, the implementation of `Tree::from_enum` is now partitioned into three cases:
1. enums that are uninhabited
2. enums for which all but one variant is uninhabited
3. enums with multiple inhabited variants
`Tree::from_variant` is now only invoked in the third case. In the first case, `Tree::uninhabited()` is produced. In the second case, the layout is delegated to `Variants::Single`'s index.
Fixes#125811
Previously, the implementation of `Tree::from_enum` incorrectly
treated enums with `Variants::Single` and `Variants::Multiple`
identically. This is incorrect for `Variants::Single` enums,
which delegate their layout to that of a variant with a particular
index (or no variant at all if the enum is empty).
This flaw manifested first as an ICE. `Tree::from_enum` attempted
to compute the tag of variants other than the one at
`Variants::Single`'s `index`, and fell afoul of a sanity-checking
assertion in `compiler/rustc_const_eval/src/interpret/discriminant.rs`.
This assertion is non-load-bearing, and can be removed; the routine
its in is well-behaved even without it.
With the assertion removed, the proximate issue becomes apparent:
calling `Tree::from_variant` on a variant that does not exist is
ill-defined. A sanity check the given variant has
`FieldShapes::Arbitrary` fails, and the analysis is (correctly)
aborted with `Err::NotYetSupported`.
This commit corrects this chain of failures by ensuring that
`Tree::from_variant` is not called on variants that are, as far as
layout is concerned, nonexistent. Specifically, the implementation
of `Tree::from_enum` is now partitioned into three cases:
1. enums that are uninhabited
2. enums for which all but one variant is uninhabited
3. enums with multiple inhabited variants
`Tree::from_variant` is now only invoked in the third case. In the
first case, `Tree::uninhabited()` is produced. In the second case,
the layout is delegated to `Variants::Single`'s index.
Fixes#125811
interpret: dyn trait metadata check: equate traits in a proper way
Hopefully fixes https://github.com/rust-lang/miri/issues/3541... unfortunately we don't have a testcase.
The first commit is just a refactor without functional change.
r? `@oli-obk`
We already do this for a number of crates, e.g. `rustc_middle`,
`rustc_span`, `rustc_metadata`, `rustc_span`, `rustc_errors`.
For the ones we don't, in many cases the attributes are a mess.
- There is no consistency about order of attribute kinds (e.g.
`allow`/`deny`/`feature`).
- Within attribute kind groups (e.g. the `feature` attributes),
sometimes the order is alphabetical, and sometimes there is no
particular order.
- Sometimes the attributes of a particular kind aren't even grouped
all together, e.g. there might be a `feature`, then an `allow`, then
another `feature`.
This commit extends the existing sorting to all compiler crates,
increasing consistency. If any new attribute line is added there is now
only one place it can go -- no need for arbitrary decisions.
Exceptions:
- `rustc_log`, `rustc_next_trait_solver` and `rustc_type_ir_macros`,
because they have no crate attributes.
- `rustc_codegen_gcc`, because it's quasi-external to rustc (e.g. it's
ignored in `rustfmt.toml`).
Remove the `ty` field from type system `Const`s
Fixes#125556Fixes#122908
Part of the work on `adt_const_params`/`generic_const_param_types`/`min_generic_const_exprs`/generally making the compiler nicer. cc rust-lang/project-const-generics#44
Please review commit-by-commit otherwise I wasted a lot of time not just squashing this into a giant mess (and also it'll be SO much nicer because theres a lot of fluff changes mixed in with other more careful changes if looking via File Changes
---
Why do this?
- The `ty` field keeps causing ICEs and weird behaviour due to it either being treated as "part of the const" or it being forgotten about leading to ICEs.
- As we move forward with `adt_const_params` and a potential `min_generic_const_exprs` it's going to become more complex to actually lower the correct `Ty<'tcx>`
- It muddles the idea behind how we check `Const` arguments have the correct type. By having the `ty` field it may seem like we ought to be relating it when we relate two types, or that its generally important information about the `Const`.
- Brings the compiler more in line with `a-mir-formality` as that also tracks the type of type system `Const`s via `ConstArgHasType` bounds in the env instead of on the `Const` itself.
- A lot of stuff is a lot nicer when you dont have to pass around the type of a const lol. Everywhere we construct `Const` is now significantly nicer 😅
See #125671's description for some more information about the `ty` field
---
General summary of changes in this PR:
- Add `Ty` to `ConstKind::Value` as otherwise there is no way to implement `ConstArgHasType` to ensure that const arguments are correctly typed for the parameter when we stop creating anon consts for all const args. It's also just incredibly difficult/annoying to thread the correct `Ty` around to a bunch of ctfe functions otherwise.
- Fully implement `ConstArgHasType` in both the old and new solver. Since it now has no reliance on the `ty` field it serves its originally intended purpose of being able to act as a double check that trait vs impls have correctly typed const parameters. It also will now be able to be responsible for checking types of const arguments to parameters under `min_generic_const_exprs`.
- Add `Ty` to `mir::Const::Ty`. I dont have a great understanding of why mir constants are setup like this to be honest. Regardless they need to be able to determine the type of the const and the easiest way to make this happen was to simply store the `Ty` along side the `ty::Const`. Maybe we can do better here in the future but I'd have to spend way more time looking at everywhere we use `mir::Const`.
- rustdoc has its own `Const` which also has a `ty` field. It was relatively easy to remove this.
---
r? `@lcnr` `@compiler-errors`
Use parenthetical notation for `Fn` traits
Always use the `Fn(T) -> R` format when printing closure traits instead of `Fn<(T,), Output = R>`.
Address #67100:
```
error[E0277]: expected a `Fn()` closure, found `F`
--> file.rs:6:13
|
6 | call_fn(f)
| ------- ^ expected an `Fn()` closure, found `F`
| |
| required by a bound introduced by this call
|
= note: wrap the `F` in a closure with no arguments: `|| { /* code */ }`
note: required by a bound in `call_fn`
--> file.rs:1:15
|
1 | fn call_fn<F: Fn() -> ()>(f: &F) {
| ^^^^^^^^^^ required by this bound in `call_fn`
help: consider further restricting this bound
|
5 | fn call_any<F: std::any::Any + Fn()>(f: &F) {
| ++++++
```
Always use the `Fn(T) -> R` format when printing closure traits instead of `Fn<(T,), Output = R>`.
Fix#67100:
```
error[E0277]: expected a `Fn()` closure, found `F`
--> file.rs:6:13
|
6 | call_fn(f)
| ------- ^ expected an `Fn()` closure, found `F`
| |
| required by a bound introduced by this call
|
= note: wrap the `F` in a closure with no arguments: `|| { /* code */ }`
note: required by a bound in `call_fn`
--> file.rs:1:15
|
1 | fn call_fn<F: Fn() -> ()>(f: &F) {
| ^^^^^^^^^^ required by this bound in `call_fn`
help: consider further restricting this bound
|
5 | fn call_any<F: std::any::Any + Fn()>(f: &F) {
| ++++++
```
The guarded call will ICE on its own.
While this improved diagnostics in the presence of bugs somewhat, it is also a blocker to query feeding of constants. If this case is hit again, we should instead improve diagnostics of the root ICE
compiler: validate.rs belongs next to what it validates
It's hard to find code that is deeply nested and far away from its callsites, so let's move `rustc_const_eval::transform::validate` into `rustc_mir_transform`, where all of its callers are. As `rustc_mir_transform` already depends on `rustc_const_eval`, the added visible dependency edge doesn't mean the dependency tree got any worse.
This also lets us unnest the `check_consts` module.
I did look into moving everything inside `rustc_const_eval::transform` into `rustc_mir_transform`. It turned out to be a much more complex operation, with more concerns and real edges into the `const_eval` crate, whereas this was both faster and more obvious.
Run rustfmt on files that need it.
Somehow these files aren't properly formatted. By default `x fmt` and `x tidy` only check files that have changed against master, so if an ill-formatted file somehow slips in it can stay that way as long as it doesn't get modified(?)
I found these when I ran `x fmt` explicitly on every `.rs` file in the repo, while working on
https://github.com/rust-lang/compiler-team/issues/750.
Validate the special layout restriction on `DynMetadata`
If you look at <https://stdrs.dev/nightly/x86_64-unknown-linux-gnu/std/ptr/struct.DynMetadata.html>, you'd think that `DynMetadata` is a struct with fields.
But it's actually not, because the lang item is special-cased in rustc_middle layout:
7601adcc76/compiler/rustc_middle/src/ty/layout.rs (L861-L864)
That explains the very confusing codegen ICEs I was getting in https://github.com/rust-lang/rust/pull/124251#issuecomment-2128543265
> Tried to extract_field 0 from primitive OperandRef(Immediate((ptr: %5 = load ptr, ptr %4, align 8, !nonnull !3, !align !5, !noundef !3)) @ TyAndLayout { ty: DynMetadata<dyn Callsite>, layout: Layout { size: Size(8 bytes), align: AbiAndPrefAlign { abi: Align(8 bytes), pref: Align(8 bytes) }, abi: Scalar(Initialized { value: Pointer(AddressSpace(0)), valid_range: 1..=18446744073709551615 }), fields: Primitive, largest_niche: Some(Niche { offset: Size(0 bytes), value: Pointer(AddressSpace(0)), valid_range: 1..=18446744073709551615 }), variants: Single { index: 0 }, max_repr_align: None, unadjusted_abi_align: Align(8 bytes) } })
because there was a `Field` projection despite the layout clearly saying it's [`Primitive`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_target/abi/enum.FieldsShape.html#variant.Primitive).
Thus this PR updates the MIR validator to check for such a projection, and changes `libcore` to not ever emit any projections into `DynMetadata`, just to transmute the whole thing when it wants a pointer.
Somehow these files aren't properly formatted. By default `x fmt` and `x
tidy` only check files that have changed against master, so if an
ill-formatted file somehow slips in it can stay that way as long as it
doesn't get modified(?)
I found these when I ran `x fmt` explicitly on every `.rs` file in the
repo, while working on
https://github.com/rust-lang/compiler-team/issues/750.
Remove more `#[macro_use] extern crate tracing`
Because explicit importing of macros via use items is nicer (more standard and readable) than implicit importing via `#[macro_use]`. Continuing the work from #124511 and #124914.
r? `@jackh726`
offset: allow zero-byte offset on arbitrary pointers
As per prior `@rust-lang/opsem` [discussion](https://github.com/rust-lang/opsem-team/issues/10) and [FCP](https://github.com/rust-lang/unsafe-code-guidelines/issues/472#issuecomment-1793409130):
- Zero-sized reads and writes are allowed on all sufficiently aligned pointers, including the null pointer
- Inbounds-offset-by-zero is allowed on all pointers, including the null pointer
- `offset_from` on two pointers derived from the same allocation is always allowed when they have the same address
This removes surprising UB (in particular, even C++ allows "nullptr + 0", which we currently disallow), and it brings us one step closer to an important theoretical property for our semantics ("provenance monotonicity": if operations are valid on bytes without provenance, then adding provenance can't make them invalid).
The minimum LLVM we require (v17) includes https://reviews.llvm.org/D154051, so we can finally implement this.
The `offset_from` change is needed to maintain the equivalence with `offset`: if `let ptr2 = ptr1.offset(N)` is well-defined, then `ptr2.offset_from(ptr1)` should be well-defined and return N. Now consider the case where N is 0 and `ptr1` dangles: we want to still allow offset_from here.
I think we should change offset_from further, but that's a separate discussion.
Fixes https://github.com/rust-lang/rust/issues/65108
[Tracking issue](https://github.com/rust-lang/rust/issues/117945) | [T-lang summary](https://github.com/rust-lang/rust/pull/117329#issuecomment-1951981106)
Cc `@nikic`
Rename some `FulfillmentErrorCode`/`ObligationCauseCode` variants to be less redundant
1. Rename some `FulfillmentErrorCode` variants.
2. Always use `ObligationCauseCode::` to prefix a code, rather than using a glob import and naming them through `traits::`.
3. Rename some `ObligationCauseCode` variants -- I wasn't particularly thorough with thinking of a new names for these, so could workshop them if necessary.
4. Misc stuff from renaming.
r? lcnr
Rollup of 3 pull requests
Successful merges:
- #124003 (Dellvmize some intrinsics (use `u32` instead of `Self` in some integer intrinsics))
- #124169 (Don't fatal when calling `expect_one_of` when recovering arg in `parse_seq`)
- #124286 (Subtree sync for rustc_codegen_cranelift)
r? `@ghost`
`@rustbot` modify labels: rollup
Dellvmize some intrinsics (use `u32` instead of `Self` in some integer intrinsics)
This implements https://github.com/rust-lang/compiler-team/issues/693 minus what was implemented in #123226.
Note: I decided to _not_ change `shl`/... builder methods, as it just doesn't seem worth it.
r? ``@scottmcm``
deref patterns: lower deref patterns to MIR
This lowers deref patterns to MIR. This is a bit tricky because this is the first kind of pattern that requires storing a value in a temporary. Thanks to https://github.com/rust-lang/rust/pull/123324 false edges are no longer a problem.
The thing I'm not confident about is the handling of fake borrows. This PR ignores any fake borrows inside a deref pattern. We are guaranteed to at least fake borrow the place of the first pointer value, which could be enough, but I'm not certain.
Add simple async drop glue generation
This is a prototype of the async drop glue generation for some simple types. Async drop glue is intended to behave very similar to the regular drop glue except for being asynchronous. Currently it does not execute synchronous drops but only calls user implementations of `AsyncDrop::async_drop` associative function and awaits the returned future. It is not complete as it only recurses into arrays, slices, tuples, and structs and does not have same sensible restrictions as the old `Drop` trait implementation like having the same bounds as the type definition, while code assumes their existence (requires a future work).
This current design uses a workaround as it does not create any custom async destructor state machine types for ADTs, but instead uses types defined in the std library called future combinators (deferred_async_drop, chain, ready_unit).
Also I recommend reading my [explainer](https://zetanumbers.github.io/book/async-drop-design.html).
This is a part of the [MCP: Low level components for async drop](https://github.com/rust-lang/compiler-team/issues/727) work.
Feature completeness:
- [x] `AsyncDrop` trait
- [ ] `async_drop_in_place_raw`/async drop glue generation support for
- [x] Trivially destructible types (integers, bools, floats, string slices, pointers, references, etc.)
- [x] Arrays and slices (array pointer is unsized into slice pointer)
- [x] ADTs (enums, structs, unions)
- [x] tuple-like types (tuples, closures)
- [ ] Dynamic types (`dyn Trait`, see explainer's [proposed design](https://github.com/zetanumbers/posts/blob/main/async-drop-design.md#async-drop-glue-for-dyn-trait))
- [ ] coroutines (https://github.com/rust-lang/rust/pull/123948)
- [x] Async drop glue includes sync drop glue code
- [x] Cleanup branch generation for `async_drop_in_place_raw`
- [ ] Union rejects non-trivially async destructible fields
- [ ] `AsyncDrop` implementation requires same bounds as type definition
- [ ] Skip trivially destructible fields (optimization)
- [ ] New [`TyKind::AdtAsyncDestructor`](https://github.com/zetanumbers/posts/blob/main/async-drop-design.md#adt-async-destructor-types) and get rid of combinators
- [ ] [Synchronously undroppable types](https://github.com/zetanumbers/posts/blob/main/async-drop-design.md#exclusively-async-drop)
- [ ] Automatic async drop at the end of the scope in async context
Delay interning errors to after validation
fixes https://github.com/rust-lang/rust/issues/122398fixes#122548
This improves diagnostics since validation errors are usually more helpful compared with interning errors that just make broad statements about the entire constant
r? `@RalfJung`
interpret: pass MemoryKind to adjust_alloc_base_pointer
Another puzzle piece for https://github.com/rust-lang/miri/pull/3475.
The 2nd commit renames base_pointer -> root_pointer; that's how Tree Borrows already calls them and I think the term is more clear than "base pointer". In particular, this distinguishes it from "base address", since a root pointer can point anywhere into an allocation, not just its base address.
https://github.com/rust-lang/rust/pull/124018 has been rolled up already so I couldn't add it there any more.
r? ```@oli-obk```
