Enforce coroutine-closure layouts are identical
Enforce that for an async closure, the by-ref and by-move coroutine layouts are identical. This is just a sanity check to make sure that optimizations aren't doing anything fishy.
r? oli-obk
Make sure `tcx.create_def` also depends on the forever red node, instead of just `tcx.at(span).create_def`
oversight from https://github.com/rust-lang/rust/pull/119136
Not actually an issue, because all uses of `tcx.create_def` were in the resolver, which is `eval_always`, but still good to harden against future uses of `create_def`
cc `@petrochenkov` `@WaffleLapkin`
Make sure `tcx.create_def` also depends on the forever red node, instead of just `tcx.at(span).create_def`
oversight from https://github.com/rust-lang/rust/pull/119136
Not actually an issue, because all uses of `tcx.create_def` were in the resolver, which is `eval_always`, but still good to harden against future uses of `create_def`
cc `@petrochenkov` `@WaffleLapkin`
Extend documentation for `Ty::to_opt_closure_kind` method
This API was... surprising to use. With a little extra documentation, the weirdness can be reduced quite a lot. :)
r? `@compiler-errors`
Uplift `TypeVisitableExt` into `rustc_type_ir`
This uplifts `TypeVisitableExt` into `rustc_type_ir` so it can be used in an interner-agnostic way. It also moves some `TypeSuperVisitable` bounds onto `Interner` since we don't expect to support libraries that have types which aren't foldable by default.
This restores a couple of asserts in the canonicalizer code we uplifted, and also makes it so that we can use type-flags-based helpers in the solver code, which I'm interested in uplifting.
r? lcnr
Fully stop using the HIR in trait impl checks
At least I hope I found all happy path usages. I'll need to check if I can figure out a way to make queries declare that they don't access the HIR except in error paths
Properly handle `async` block and `async fn` in `if` exprs without `else`
When encountering a tail expression in the then arm of an `if` expression without an `else` arm, account for `async fn` and `async` blocks to suggest `return`ing the value and pointing at the return type of the `async fn`.
We now also account for AFIT when looking for the return type to point at.
Fix#115405.
Merge `impl_polarity` and `impl_trait_ref` queries
Hopefully this is perf neutral. I want to finish https://github.com/rust-lang/rust/pull/120835 and stop using the HIR in `coherent_trait`, which should then give us a perf improvement.
It's only has a single remaining purpose: to ensure that a diagnostic is
printed when `trimmed_def_paths` is used. It's an annoying mechanism:
weak, with odd semantics, badly named, and gets in the way of other
changes.
This commit replaces it with a simpler `must_produce_diag` mechanism,
getting rid of a diagnostic `Level` along the way.
Dejargonize `subst`
In favor of #110793, replace almost every occurence of `subst` and `substitution` from rustc codes, but they still remains in subtrees under `src/tools/` like clippy and test codes (I'd like to replace them after this)
Fix async closures in CTFE
First commit renames `is_coroutine_or_closure` into `is_closure_like`, because `is_coroutine_or_closure_or_coroutine_closure` seems confusing and long.
Second commit fixes some forgotten cases where we want to handle `TyKind::CoroutineClosure` the same as closures and coroutines.
The test exercises the change to `ValidityVisitor::aggregate_field_path_elem` which is the source of #120946, but not the change to `UsedParamsNeedSubstVisitor`, though I feel like it's not that big of a deal. Let me know if you'd like for me to look into constructing a test for the latter, though I have no idea what it'd look like (we can't assert against `TooGeneric` anywhere?).
Fixes#120946
r? oli-obk cc ``@RalfJung``
When encountering a tail expression in the then arm of an `if` expression
without an `else` arm, account for `async fn` and `async` blocks to
suggest `return`ing the value and pointing at the return type of the
`async fn`.
We now also account for AFIT when looking for the return type to point at.
Fix#115405.
Rollup of 11 pull requests
Successful merges:
- #120765 (Reorder diagnostics API)
- #120833 (More internal emit diagnostics cleanups)
- #120899 (Gracefully handle non-WF alias in `assemble_alias_bound_candidates_recur`)
- #120917 (Remove a bunch of dead parameters in functions)
- #120928 (Add test for recently fixed issue)
- #120933 (check_consts: fix duplicate errors, make importance consistent)
- #120936 (improve `btree_cursors` functions documentation)
- #120944 (Check that the ABI of the instance we are inlining is correct)
- #120956 (Clean inlined type alias with correct param-env)
- #120962 (Add myself to library/std review)
- #120972 (fix ICE for deref coercions with type errors)
r? `@ghost`
`@rustbot` modify labels: rollup
Assert that params with the same *index* have the same *name*
Found this bug when trying to build libcore with the new solver, since it will canonicalize two params with the same index into *different* placeholders if those params differ by name.
Print kind of coroutine closure
Make sure that we print "async closure" when we have an async closure, rather than calling it generically a ["coroutine-closure"](https://github.com/rust-lang/rust/pull/120361).
Fixes#120886
r? oli-obk
Remove the FIXME and keep `CRATE_HIR_ID` being its own parent.
This scheme turned out to be more practical than having an `Option` on closer inspection.
Also make `hir_owner_parent` more readable.
improve normalization of `Pointee::Metadata`
This PR makes it so that `<Wrapper<Tail> as Pointee>::Metadata` is normalized to `<Tail as Pointee>::Metadata` if we don't know `Wrapper<Tail>: Sized`. With that, the trait solver can prove projection predicates like `<Wrapper<Tail> as Pointee>::Metadata == <Tail as Pointee>::Metadata`, which makes it possible to use the metadata APIs to cast between the tail and the wrapper:
```rust
#![feature(ptr_metadata)]
use std::ptr::{self, Pointee};
fn cast_same_meta<T: ?Sized, U: ?Sized>(ptr: *const T) -> *const U
where
T: Pointee<Metadata = <U as Pointee>::Metadata>,
{
let (thin, meta) = ptr.to_raw_parts();
ptr::from_raw_parts(thin, meta)
}
struct Wrapper<T: ?Sized>(T);
fn cast_to_wrapper<T: ?Sized>(ptr: *const T) -> *const Wrapper<T> {
cast_same_meta(ptr)
}
```
Previously, this failed to compile:
```
error[E0271]: type mismatch resolving `<Wrapper<T> as Pointee>::Metadata == <T as Pointee>::Metadata`
--> src/lib.rs:16:5
|
15 | fn cast_to_wrapper<T: ?Sized>(ptr: *const T) -> *const Wrapper<T> {
| - found this type parameter
16 | cast_same_meta(ptr)
| ^^^^^^^^^^^^^^ expected `Wrapper<T>`, found type parameter `T`
|
= note: expected associated type `<Wrapper<T> as Pointee>::Metadata`
found associated type `<T as Pointee>::Metadata`
= note: an associated type was expected, but a different one was found
```
(Yes, you can already do this with `as` casts. But using functions is so much ✨ *safer* ✨, because you can't change the metadata on accident.)
---
This PR essentially changes the built-in impls of `Pointee` from this:
```rust
// before
impl Pointee for u8 {
type Metadata = ();
}
impl Pointee for [u8] {
type Metadata = usize;
}
// ...
impl Pointee for Wrapper<u8> {
type Metadata = ();
}
impl Pointee for Wrapper<[u8]> {
type Metadata = usize;
}
// ...
// This impl is only selected if `T` is a type parameter or unnormalizable projection or opaque type.
fallback impl<T: ?Sized> Pointee for Wrapper<T>
where
Wrapper<T>: Sized
{
type Metadata = ();
}
// This impl is only selected if `T` is a type parameter or unnormalizable projection or opaque type.
fallback impl<T /*: Sized */> Pointee for T {
type Metadata = ();
}
```
to this:
```rust
// after
impl Pointee for u8 {
type Metadata = ();
}
impl Pointee for [u8] {
type Metadata = usize;
}
// ...
impl<T: ?Sized> Pointee for Wrapper<T> {
// in the old solver this will instead project to the "deep" tail directly,
// e.g. `Wrapper<Wrapper<T>>::Metadata = T::Metadata`
type Metadata = <T as Pointee>::Metadata;
}
// ...
// This impl is only selected if `T` is a type parameter or unnormalizable projection or opaque type.
fallback impl<T /*: Sized */> Pointee for T {
type Metadata = ();
}
```
Invert diagnostic lints.
That is, change `diagnostic_outside_of_impl` and `untranslatable_diagnostic` from `allow` to `deny`, because more than half of the compiler has been converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow` attributes, which proves that this change is warranted.
r? ````@davidtwco````
Toggle assert_unsafe_precondition in codegen instead of expansion
The goal of this PR is to make some of the unsafe precondition checks in the standard library available in debug builds. Some UI tests are included to verify that it does that.
The diff is large, but most of it is blessing mir-opt tests and I've also split up this PR so it can be reviewed commit-by-commit.
This PR:
1. Adds a new intrinsic, `debug_assertions` which is lowered to a new MIR NullOp, and only to a constant after monomorphization
2. Rewrites `assume_unsafe_precondition` to check the new intrinsic, and be monomorphic.
3. Skips codegen of the `assume` intrinsic in unoptimized builds, because that was silly before but with these checks it's *very* silly
4. The checks with the most overhead are `ptr::read`/`ptr::write` and `NonNull::new_unchecked`. I've simply added `#[cfg(debug_assertions)]` to the checks for `ptr::read`/`ptr::write` because I was unable to come up with any (good) ideas for decreasing their impact. But for `NonNull::new_unchecked` I found that the majority of callers can use a different function, often a safe one.
Yes, this PR slows down the compile time of some programs. But in our benchmark suite it's never more than 1% icount, and the average icount change in debug-full programs is 0.22%. I think that is acceptable for such an improvement in developer experience.
https://github.com/rust-lang/rust/issues/120539#issuecomment-1922687101
Remove unused args from functions
`#[instrument]` suppresses the unused arguments from a function, *and* suppresses unused methods too! This PR removes things which are only used via `#[instrument]` calls, and fixes some other errors (privacy?) that I will comment inline.
It's possible that some of these arguments were being passed in for the purposes of being instrumented, but I am unconvinced by most of them.
Introduce `enter_forall` to supercede `instantiate_binder_with_placeholders`
r? `@lcnr`
Long term we'd like to experiment with decrementing the universe count after "exiting" binders so that we do not end up creating infer vars in non-root universes even when they logically reside in the root universe. The fact that we dont do this currently results in a number of issues in the new trait solver where we consider goals to be ambiguous because otherwise it would require lowering the universe of an infer var. i.e. the goal `?x.0 eq <T as Trait<?y.1>>::Assoc` where the alias is rigid would not be able to instantiate `?x` with the alias as there would be a universe error.
This PR is the first-ish sort of step towards being able to implement this as eventually we would want to decrement the universe in `enter_forall`. Unfortunately its Difficult to actually implement decrementing universes nicely so this is a separate step which moves us closer to the long term goal ✨
improve pretty printing for associated items in trait objects
* Don't print a binder in front of associated items, because it's not valid syntax.
* e.g. print `dyn for<'a> Trait<'a, Assoc = &'a u8>` instead of `dyn for<'a> Trait<'a, for<'a> Assoc = &'a u8>`.
* Don't print associated items that are implied by a supertrait bound.
* e.g. if we have `trait Sub: Super<Assoc = u8> {}`, then just print `dyn Sub` instead of `dyn Sub<Assoc = u8>`.
I've added the test in the first commit, so you can see the diff of the compiler output in the second commit.
Reconstify `Add`
r? project-const-traits
I'm not happy with the ui test changes (or failures because I did not bless them and include the diffs in this PR). There is at least some bugs I need to look and try fix:
1. A third duplicated diagnostic when a consumer crate that does not have `effects` enabled has a trait selection error for an upstream const_trait trait. See tests/ui/ufcs/ufcs-qpath-self-mismatch.rs.
2. For some reason, making `Add` a const trait would stop us from suggesting `T: Add` when we try to add two `T`s without that bound. See tests/ui/suggestions/issue-97677.rs
Record coroutine kind in coroutine generics
Oops, added a new substitution (the "kind" ty) to coroutines but forgot to record it in the `generics_of`. I'm surprised I left this out of the coroutine-closure PR -- I thought I made this change; I possibly rebased it out by accident.
Fixes#120732
r? oli-obk
MirPass: make name more const
Continues #120161, this time applied to `MirPass` instead of `MirLint`, locally shaves few (very few) instructions off.
r? ``@cjgillot``
Don't expect early-bound region to be local when reporting errors in RPITIT well-formedness
The implicit lifetime in the example code gets replaced with `ReError`, which fails a `sub_regions` check in the lexical region solver. Error reporting ends up calling `is_suitable_region` on an early bound region in the *trait* definition. This causes an ICE because we `expect_local()`.
This is kind of a bad explanation, but this code just makes diagnostics reporting a bit more gracefully fallible. If the reviewer wants a thorough investigation of exactly where we get this region outlives obligation, I can write one up. Doesn't really seem worth it, though, imo.
Fixes#120638Fixes#120648
update indirect structural match lints to match RFC and to show up for dependencies
This is a large step towards implementing https://github.com/rust-lang/rfcs/pull/3535.
We currently have five lints related to "the structural match situation":
- nontrivial_structural_match
- indirect_structural_match
- pointer_structural_match
- const_patterns_without_partial_eq
- illegal_floating_point_literal_pattern
This PR concerns the first 3 of them. (The 4th already is set up to show for dependencies, and the 5th is removed by https://github.com/rust-lang/rust/pull/116284.) nontrivial_structural_match is being removed as per the RFC; the other two are enabled to show up in dependencies.
Fixes https://github.com/rust-lang/rust/issues/73448 by removing the affected analysis.
That is, change `diagnostic_outside_of_impl` and
`untranslatable_diagnostic` from `allow` to `deny`, because more than
half of the compiler has be converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow`
attributes, which proves that this change is warranted.
make matching on NaN a hard error, and remove the rest of illegal_floating_point_literal_pattern
These arms would never be hit anyway, so the pattern makes little sense. We have had a future-compat lint against float matches in general for a *long* time, so I hope we can get away with immediately making this a hard error.
This is part of implementing https://github.com/rust-lang/rfcs/pull/3535.
Closes https://github.com/rust-lang/rust/issues/41620 by removing the lint.
https://github.com/rust-lang/reference/pull/1456 updates the reference to match.
Move predicate, region, and const stuff into their own modules in middle
This PR mostly moves things around, and in a few cases adds some `ty::` to the beginning of names to avoid one-off imports.
I don't mean this to be the most *thorough* move/refactor. I just generally wanted to begin to split up `ty/mod.rs` and `ty/sty.rs` which are huge and hard to distinguish, and have a lot of non-ty stuff in them.
r? lcnr
it works when a non-const context that does not enable effects
calls into a const effects-enabled trait. We'd simply suggest the
non-const trait bound in this case consistent to its fallback.
hir: Remove the generic type parameter from `MaybeOwned`
It's only ever used with a reference to `OwnerInfo` as an argument.
Follow up to https://github.com/rust-lang/rust/pull/120346.
Deduplicate more sized errors on call exprs
Change the implicit `Sized` `Obligation` `Span` for call expressions to include the whole expression. This aids the existing deduplication machinery to reduce the number of errors caused by a single unsized expression.
The query accept arbitrary DefIds, not just owner DefIds.
The return can be an `Option` because if there are no nodes, then it doesn't matter whether it's due to NonOwner or Phantom.
Also rename the query to `opt_hir_owner_nodes`.
Because it's almost always static.
This makes `impl IntoDiagnosticArg for DiagnosticArgValue` trivial,
which is nice.
There are a few diagnostics constructed in
`compiler/rustc_mir_build/src/check_unsafety.rs` and
`compiler/rustc_mir_transform/src/errors.rs` that now need symbols
converted to `String` with `to_string` instead of `&str` with `as_str`,
but that' no big deal, and worth it for the simplifications elsewhere.
Error codes are integers, but `String` is used everywhere to represent
them. Gross!
This commit introduces `ErrCode`, an integral newtype for error codes,
replacing `String`. It also introduces a constant for every error code,
e.g. `E0123`, and removes the `error_code!` macro. The constants are
imported wherever used with `use rustc_errors::codes::*`.
With the old code, we have three different ways to specify an error code
at a use point:
```
error_code!(E0123) // macro call
struct_span_code_err!(dcx, span, E0123, "msg"); // bare ident arg to macro call
\#[diag(name, code = "E0123")] // string
struct Diag;
```
With the new code, they all use the `E0123` constant.
```
E0123 // constant
struct_span_code_err!(dcx, span, E0123, "msg"); // constant
\#[diag(name, code = E0123)] // constant
struct Diag;
```
The commit also changes the structure of the error code definitions:
- `rustc_error_codes` now just defines a higher-order macro listing the
used error codes and nothing else.
- Because that's now the only thing in the `rustc_error_codes` crate, I
moved it into the `lib.rs` file and removed the `error_codes.rs` file.
- `rustc_errors` uses that macro to define everything, e.g. the error
code constants and the `DIAGNOSTIC_TABLES`. This is in its new
`codes.rs` file.
ScopeTree: remove destruction_scopes as unused
last usages removed by https://github.com/rust-lang/rust/pull/116170
Unused, but still presented in memory at `t-gmax` (in DHAT termonology)
Remove unused/unnecessary features
~~The bulk of the actual code changes here is replacing try blocks with equivalent closures. I'm not entirely sure that's a good idea since it may have perf impact, happy to revert if that's the case/the change is unwanted.~~
I also removed a lot of `recursion_limit = "256"` since everything seems to build fine without that and most don't have any comment justifying it.
remove StructuralEq trait
The documentation given for the trait is outdated: *all* function pointers implement `PartialEq` and `Eq` these days. So the `StructuralEq` trait doesn't really seem to have any reason to exist any more.
One side-effect of this PR is that we allow matching on some consts that do not implement `Eq`. However, we already allowed matching on floats and consts containing floats, so this is not new, it is just allowed in more cases now. IMO it makes no sense at all to allow float matching but also sometimes require an `Eq` instance. If we want to require `Eq` we should adjust https://github.com/rust-lang/rust/pull/115893 to check for `Eq`, and rule out float matching for good.
Fixes https://github.com/rust-lang/rust/issues/115881
Remove coroutine info when building coroutine drop body
Coroutine drop shims are not themselves coroutines, so erase the "`coroutine`" field from the body so that helper fns like `yield_ty` and `coroutine_kind` properly return `None` for the drop shim.
Rollup of 10 pull requests
Successful merges:
- #119305 (Add `AsyncFn` family of traits)
- #119389 (Provide more context on recursive `impl` evaluation overflow)
- #119895 (Remove `track_errors` entirely)
- #120230 (Assert that a single scope is passed to `for_scope`)
- #120278 (Remove --fatal-warnings on wasm targets)
- #120292 (coverage: Dismantle `Instrumentor` and flatten span refinement)
- #120315 (On E0308 involving `dyn Trait`, mention trait objects)
- #120317 (pattern_analysis: Let `ctor_sub_tys` return any Iterator they want)
- #120318 (pattern_analysis: Reuse most of the `DeconstructedPat` `Debug` impl)
- #120325 (rustc_data_structures: use either instead of itertools)
r? `@ghost`
`@rustbot` modify labels: rollup
Remove `track_errors` entirely
follow up to https://github.com/rust-lang/rust/pull/119869
r? `@matthewjasper`
There are some diagnostic changes adding new diagnostics or not emitting some anymore. We can improve upon that in follow-up work imo.
Modify GenericArg and Term structs to use strict provenance rules
This is the first PR to solve issue #119217 . In this PR, I have modified the GenericArg struct to use the `NonNull` struct as the pointer instead of `NonZeroUsize`. The change were tested by running `./x test compiler/rustc_middle`.
Resolves https://github.com/rust-lang/rust/issues/119217
r? `@WaffleLapkin`
Remove all ConstPropNonsense
We track all locals and projections on them ourselves within the const propagator and only use the InterpCx to actually do some low level operations or read from constants (via `OpTy` we get for said constants).
This helps moving the const prop lint out from the normal pipeline and running it just based on borrowck information. This in turn allows us to make progress on https://github.com/rust-lang/rust/pull/108730#issuecomment-1875557745
there are various follow up cleanups that can be done after this PR (e.g. not matching on Rvalue twice and doing binop checks twice), but lets try landing this one first.
r? `@RalfJung`
Change the implicit `Sized` `Obligation` `Span` for call expressions to
include the whole expression. This aids the existing deduplication
machinery to reduce the number of errors caused by a single unsized
expression.
Rollup of 9 pull requests
Successful merges:
- #112806 (Small code improvements in `collect_intra_doc_links.rs`)
- #119766 (Split tait and impl trait in assoc items logic)
- #120139 (Do not normalize closure signature when building `FnOnce` shim)
- #120160 (Manually implement derived `NonZero` traits.)
- #120171 (Fix assume and assert in jump threading)
- #120183 (Add `#[coverage(off)]` to closures introduced by `#[test]` and `#[bench]`)
- #120195 (add several resolution test cases)
- #120259 (Split Diagnostics for Uncommon Codepoints: Add List to Display Characters Involved)
- #120261 (Provide structured suggestion to use trait objects in some cases of `if` arm type divergence)
r? `@ghost`
`@rustbot` modify labels: rollup
Do not normalize closure signature when building `FnOnce` shim
It is not necessary to normalize the closure signature when building an `FnOnce` shim for an `Fn`/`FnMut` closure. That closure shim is just calling `FnMut::call_mut(&mut self)` anyways.
It's also somewhat sketchy that we were ever doing this to begin with, since we're normalizing with a `ParamEnv::reveal_all()` param-env, which is definitely not right with possibly polymorphic substs.
This cuts out a tiny bit of unnecessary work in `Instance::resolve` and simplifies the signature because now we can unconditionally return an `Instance`.
A bunch of random modifications
r? oli-obk
Kitchen sink of changes that I didn't know where to put elsewhere. Documentation tweaks mostly, but also removing some unreachable code and simplifying the pretty printing for closures/coroutines.
const-eval interning: get rid of type-driven traversal
This entirely replaces our const-eval interner, i.e. the code that takes the final result of a constant evaluation from the local memory of the const-eval machine to the global `tcx` memory. The main goal of this change is to ensure that we can detect mutable references that sneak into this final value -- this is something we want to reject for `static` and `const`, and while const-checking performs some static analysis to ensure this, I would be much more comfortable stabilizing const_mut_refs if we had a dynamic check that sanitizes the final value. (This is generally the approach we have been using on const-eval: do a static check to give nice errors upfront, and then do a dynamic check to be really sure that the properties we need for soundness, actually hold.)
We can do this now that https://github.com/rust-lang/rust/pull/118324 landed and each pointer comes with a bit (completely independent of its type) storing whether mutation is permitted through this pointer or not.
The new interner is a lot simpler than the old one: previously we did a complete type-driven traversal to determine the mutability of all memory we see, and then a second pass to intern any leftover raw pointers. The new interner simply recursively traverses the allocation holding the final result, and all allocations reachable from it (which can be determined from the raw bytes of the result, without knowing anything about types), and ensures they all get interned. The initial allocation is interned as immutable for `const` and pomoted and non-interior-mutable `static`; all other allocations are interned as immutable for `static`, `const`, and promoted. The main subtlety is justifying that those inner allocations may indeed be interned immutably, i.e., that mutating them later would anyway already be UB:
- for promoteds, we rely on the analysis that does promotion to ensure that this is sound.
- for `const` and `static`, we check that all pointers in the final result that point to things that are new (i.e., part of this const evaluation) are immutable, i.e., were created via `&<expr>` at a non-interior-mutable type. Mutation through immutable pointers is UB so we are free to intern that memory as immutable.
Interning raises an error if it encounters a dangling pointer or a mutable pointer that violates the above rules.
I also extended our type-driven const validity checks to ensure that `&mut T` in the final value of a const points to mutable memory, at least if `T` is not zero-sized. This catches cases of people turning `&i32` into `&mut i32` (which would still be considered a read-only pointer). Similarly, when these checks encounter an `UnsafeCell`, they are checking that it lives in mutable memory. (Both of these only traverse the newly created values; if those point to other consts/promoteds, the check stops there. But that's okay, we don't have to catch all the UB.) I co-developed this with the stricter interner changes but I can split it out into a separate PR if you prefer.
This PR does have the immediate effect of allowing some new code on stable, for instance:
```rust
const CONST_RAW: *const Vec<i32> = &Vec::new() as *const _;
```
Previously that code got rejected since the type-based interner didn't know what to do with that pointer. It's a raw pointer, we cannot trust its type. The new interner does not care about types so it sees no issue with this code; there's an immutable pointer pointing to some read-only memory (storing a `Vec<i32>`), all is good. Accepting this code pretty much commits us to non-type-based interning, but I think that's the better strategy anyway.
This PR also leads to slightly worse error messages when the final value of a const contains a dangling reference. Previously we would complete interning and then the type-based validation would detect this dangling reference and show a nice error saying where in the value (i.e., in which field) the dangling reference is located. However, the new interner cannot distinguish dangling references from dangling raw pointers, so it must throw an error when it encounters either of them. It doesn't have an understanding of the value structure so all it can say is "somewhere in this constant there's a dangling pointer". (Later parts of the compiler don't like dangling pointers/references so we have to reject them either during interning or during validation.) This could potentially be improved by doing validation before interning, but that's a larger change that I have not attempted yet. (It's also subtle since we do want validation to use the final mutability bits of all involved allocations, and currently it is interning that marks a bunch of allocations as immutable -- that would have to still happen before validation.)
`@rust-lang/wg-const-eval` I hope you are okay with this plan. :)
`@rust-lang/lang` paging you in since this accepts new code on stable as explained above. Please let me know if you think FCP is necessary.
Revert stabilization of trait_upcasting feature
Reverts #118133
This reverts commit 6d2b84b3ed, reversing changes made to 73bc12199e.
The feature has a soundness bug:
* #120222
It is unclear to me whether we'll actually want to destabilize, but I thought it was still prudent to open the PR for easy destabilization once we get there.
Fix a `trimmed_def_paths` assertion failure.
`RegionHighlightMode::force_print_trimmed_def_path` can call `trimmed_def_paths` even when `tcx.sess.opts.trimmed_def_paths` is false. Based on the `force` in the method name, it seems this is deliberate, so I have removed the assertion.
Fixes#120035.
r? `@compiler-errors`
Consolidate logic around resolving built-in coroutine trait impls
Deduplicates a lot of code. Requires defining a new lang item for `Coroutine::resume` for consistency, but it seems not harmful at worst, and potentially later useful at best.
r? oli-obk
Pack u128 in the compiler to mitigate new alignment
This is based on #116672, adding a new `#[repr(packed(8))]` wrapper on `u128` to avoid changing any of the compiler's size assertions. This is needed in two places:
* `SwitchTargets`, otherwise its `SmallVec<[u128; 1]>` gets padded up to 32 bytes.
* `LitKind::Int`, so that entire `enum` can stay 24 bytes.
* This change definitely has far-reaching effects though, since it's public.
Rollup of 9 pull requests
Successful merges:
- #118714 ( Explanation that fields are being used when deriving `(Partial)Ord` on enums)
- #119710 (Improve `let_underscore_lock`)
- #119726 (Tweak Library Integer Division Docs)
- #119746 (rustdoc: hide modals when resizing the sidebar)
- #119986 (Fix error counting)
- #120194 (Shorten `#[must_use]` Diagnostic Message for `Option::is_none`)
- #120200 (Correct the anchor of an URL in an error message)
- #120203 (Replace `#!/bin/bash` with `#!/usr/bin/env bash` in rust-installer tests)
- #120212 (Give nnethercote more reviews)
r? `@ghost`
`@rustbot` modify labels: rollup
`RegionHighlightMode::force_print_trimmed_def_path` can call
`trimmed_def_paths` even when `tcx.sess.opts.trimmed_def_paths` is
false. Based on the `force` in the method name, it seems this is
deliberate, so I have removed the assertion.
Fixes#120035.
We have several methods indicating the presence of errors, lint errors,
and delayed bugs. I find it frustrating that it's very unclear which one
you should use in any particular spot. This commit attempts to instill a
basic principle of "use the least general one possible", because that
reflects reality in practice -- `has_errors` is the least general one
and has by far the most uses (esp. via `abort_if_errors`).
Specifics:
- Add some comments giving some usage guidelines.
- Prefer `has_errors` to comparing `err_count` to zero.
- Remove `has_errors_or_span_delayed_bugs` because it's a weird one: in
the cases where we need to count delayed bugs, we should really be
counting lint errors as well.
- Rename `is_compilation_going_to_fail` as
`has_errors_or_lint_errors_or_span_delayed_bugs`, for consistency with
`has_errors` and `has_errors_or_lint_errors`.
- Change a few other `has_errors_or_lint_errors` calls to `has_errors`,
as per the "least general" principle.
This didn't turn out to be as neat as I hoped when I started, but I
think it's still an improvement.
Make stable_mir::with_tables sound
See the first commit for the actual soundness fix. The rest is just fallout from that and is entirely safe code. Includes most of #120120
The major difference to #120120 is that we don't need an unsafe trait, as we can now rely on the type system (the only unsafe part, and the actual source of the unsoundness was in `with_tables`)
r? `@celinval`
LLVM 18 x86 data layout update
With https://reviews.llvm.org/D86310 LLVM now has i128 aligned to 16-bytes on x86 based platforms. This will be in LLVM-18. This patch updates all our spec targets to be 16-byte aligned, and removes the alignment when speaking to older LLVM.
This results in Rust overaligning things relative to LLVM on older LLVMs.
This implements MCP https://github.com/rust-lang/compiler-team/issues/683.
See #54341
With https://reviews.llvm.org/D86310 LLVM now has i128 aligned to
16-bytes on x86 based platforms. This will be in LLVM-18. This patch
updates all our spec targets to be 16-byte aligned, and removes the
alignment when speaking to older LLVM.
This results in Rust overaligning things relative to LLVM on older LLVMs.
This alignment change was discussed in rust-lang/compiler-team#683
See #54341 for additional information about why this is happening and
where this will be useful in the future.
This *does not* stabilize `i128`/`u128` for FFI.
Get rid of the hir_owner query.
This query was meant as a firewall between `hir_owner_nodes` which is supposed to change often, and the queries that only depend on the item signature. That firewall was inefficient, leaking the contents of the HIR body through `HirId`s.
`hir_owner` incurs a significant cost, as we need to hash HIR twice in multiple modes. This PR proposes to remove it, and simplify the hashing scheme.
For the future, `def_kind`, `def_span`... are much more efficient for incremental decoupling, and should be preferred.
change `.unwrap()` to `?` on write where `fmt::Result` is returned
Fixes#120090 which points out that some of the `.unwrap()`s in `rustc_middle/src/mir/pretty.rs` are likely meant to be `?`s
Improved collapse_debuginfo attribute, added command-line flag
Improved attribute collapse_debuginfo with variants: `#[collapse_debuginfo=(no|external|yes)]`.
Added command-line flag for default behaviour.
Work-in-progress: will add more tests.
cc https://github.com/rust-lang/rust/issues/100758
Rollup of 8 pull requests
Successful merges:
- #119172 (Detect `NulInCStr` error earlier.)
- #119833 (Make tcx optional from StableMIR run macro and extend it to accept closures)
- #119967 (Add `PatKind::Err` to AST/HIR)
- #119978 (Move async closure parameters into the resultant closure's future eagerly)
- #120021 (don't store const var origins for known vars)
- #120038 (Don't create a separate "basename" when naming and opening a MIR dump file)
- #120057 (Don't ICE when deducing future output if other errors already occurred)
- #120073 (Remove spastorino from users_on_vacation)
r? `@ghost`
`@rustbot` modify labels: rollup
error on incorrect implied bounds in wfcheck except for Bevy dependents
Rebase of #109763
Additionally, special cases Bevy `ParamSet` types to not trigger the lint. This is tracked in #119956.
Fixes#109628
Don't create a separate "basename" when naming and opening a MIR dump file
These functions were split up by #77080, in order to support passing the dump file's “basename” (filename without extension) to the implementation of `-Zdump-mir-spanview`, so that it could be used as a page title.
That flag has since been removed (#119566), so now there's no particular reason for this code to handle the basename separately from the filename or full path.
This PR therefore restores things to (roughly) how they were before #77080.
Rework how diagnostic lints are stored.
`Diagnostic::code` has the type `DiagnosticId`, which has `Error` and
`Lint` variants. Plus `Diagnostic::is_lint` is a bool, which should be
redundant w.r.t. `Diagnostic::code`.
Seems simple. Except it's possible for a lint to have an error code, in
which case its `code` field is recorded as `Error`, and `is_lint` is
required to indicate that it's a lint. This is what happens with
`derive(LintDiagnostic)` lints. Which means those lints don't have a
lint name or a `has_future_breakage` field because those are stored in
the `DiagnosticId::Lint`.
It's all a bit messy and confused and seems unintentional.
This commit:
- removes `DiagnosticId`;
- changes `Diagnostic::code` to `Option<String>`, which means both
errors and lints can straightforwardly have an error code;
- changes `Diagnostic::is_lint` to `Option<IsLint>`, where `IsLint` is a
new type containing a lint name and a `has_future_breakage` bool, so
all lints can have those, error code or not.
r? `@oli-obk`
Cache local DefId-keyed queries without hashing
This caches local DefId-keyed queries using just an IndexVec. This costs ~5% extra max-rss at most but brings significant runtime improvement, up to 13% cycle counts (mean: 4%) on primary benchmarks. It's possible that further tweaks could reduce the memory overhead further but this win seems worth landing despite the increased memory, particularly with regards to eliminating the present set in non-incr or storing it inline (skip list?) with the main data.
We tried applying this scheme to all keys in the [first perf run] but found that it carried a significant memory hit (50%). instructions/cycle counts were also much more mixed, though that may have been due to the lack of the present set optimization (needed for fast iter() calls in incremental scenarios).
Closes https://github.com/rust-lang/rust/issues/45275
[first perf run]: https://perf.rust-lang.org/compare.html?start=30dfb9e046aeb878db04332c74de76e52fb7db10&end=6235575300d8e6e2cc6f449cb9048722ef43f9c7&stat=instructions:u
Simplify `closure_env_ty` and `closure_env_param`
Random cleanup that I found when working on async closures. This makes it easier to separate the latter into a new tykind.
Foreign maps are used to cache external DefIds, typically backed by
metadata decoding. In the future we might skip caching `V` there (since
loading from metadata usually is already cheap enough), but for now this
cuts down on the impact to memory usage and time to None-init a bunch of
memory. Foreign data is usually much sparser, since we're not usually
loading *all* entries from the foreign crate(s).
`OutputTypeParameterMismatch` -> `SignatureMismatch`
I'm probably missing something that made this rename more complicated. What did you end up getting stuck on when renaming this selection error, `@lcnr?`
**also** I renamed the `FulfillmentErrorCode` variants. This is just churn but I wanted to do it forever. I can move it out of this PR if desired.
r? lcnr
Inverting the condition lets us merge the two `Ok(false)` paths. I also
find the inverted condition easier to read: "all the things that must be
true for trimming to occur", instead of "any of the things that must be
true for trimming to not occur".
`Diagnostic::code` has the type `DiagnosticId`, which has `Error` and
`Lint` variants. Plus `Diagnostic::is_lint` is a bool, which should be
redundant w.r.t. `Diagnostic::code`.
Seems simple. Except it's possible for a lint to have an error code, in
which case its `code` field is recorded as `Error`, and `is_lint` is
required to indicate that it's a lint. This is what happens with
`derive(LintDiagnostic)` lints. Which means those lints don't have a
lint name or a `has_future_breakage` field because those are stored in
the `DiagnosticId::Lint`.
It's all a bit messy and confused and seems unintentional.
This commit:
- removes `DiagnosticId`;
- changes `Diagnostic::code` to `Option<String>`, which means both
errors and lints can straightforwardly have an error code;
- changes `Diagnostic::is_lint` to `Option<IsLint>`, where `IsLint` is a
new type containing a lint name and a `has_future_breakage` bool, so
all lints can have those, error code or not.
Suggest Upgrading Compiler for Gated Features
This PR addresses #117318
I have a few questions:
1. Do we want to specify the current version and release date of the compiler? I have added this in via environment variables, which I found in the code for the rustc cli where it handles the `--version` flag
a. How can I handle the changing message in the tests?
3. Do we want to only show this message when the compiler is old?
a. How can we determine when the compiler is old?
I'll wait until we figure out the message to bless the tests
Register even erroneous impls
Otherwise the specialization graph fails to pick it up, even though other code assumes that all impl blocks have an entry in the specialization graph.
also includes an unrelated cleanup of the specialization graph query
fixes #119827
next solver: provisional cache
this adds the cache removed in #115843. However, it should now correctly track whether a provisional result depends on an inductive or coinductive stack.
While working on this, I was using the following doc: https://hackmd.io/VsQPjW3wSTGUSlmgwrDKOA. I don't think it's too helpful to understanding this, but am somewhat hopeful that the inline comments are more useful.
There are quite a few future perf improvements here. Given that this is already very involved I don't believe it is worth it (for now). While working on this PR one of my few attempts to significantly improve perf ended up being unsound again because I was not careful enough ✨
r? `@compiler-errors`
Cleanup things in and around `Diagnostic`
These changes all arose when I was looking closely at how to simplify `DiagCtxtInner::emit_diagnostic`.
r? `@compiler-errors`
`is_force_warn` is only possible for diagnostics with `Level::Warning`,
but it is currently stored in `Diagnostic::code`, which every diagnostic
has.
This commit:
- removes the boolean `DiagnosticId::Lint::is_force_warn` field;
- adds a `ForceWarning` variant to `Level`.
Benefits:
- The common `Level::Warning` case now has no arguments, replacing
lots of `Warning(None)` occurrences.
- `rustc_session::lint::Level` and `rustc_errors::Level` are more
similar, both having `ForceWarning` and `Warning`.
In #119606 I added them and used a `_mv` suffix, but that wasn't great.
A `with_` prefix has three different existing uses.
- Constructors, e.g. `Vec::with_capacity`.
- Wrappers that provide an environment to execute some code, e.g.
`with_session_globals`.
- Consuming chaining methods, e.g. `Span::with_{lo,hi,ctxt}`.
The third case is exactly what we want, so this commit changes
`DiagnosticBuilder::foo_mv` to `DiagnosticBuilder::with_foo`.
Thanks to @compiler-errors for the suggestion.
We have `span_delayed_bug` and often pass it a `DUMMY_SP`. This commit
adds `delayed_bug`, which matches pairs like `err`/`span_err` and
`warn`/`span_warn`.
Because it takes an error code after the span. This avoids the confusing
overlap with the `DiagCtxt::struct_span_err` method, which doesn't take
an error code.
Merge dead bb pruning and unreachable bb deduplication.
Both routines share the same basic structure: iterate on all bbs to identify work, and then renumber bbs.
We can do both at once.
Support async recursive calls (as long as they have indirection)
Before #101692, we stored coroutine witness types directly inside of the coroutine. That means that a coroutine could not contain itself (as a witness field) without creating a cycle in the type representation of the coroutine, which we detected with the `OpaqueTypeExpander`, which is used to detect cycles when expanding opaque types after that are inferred to contain themselves.
After `-Zdrop-tracking-mir` was stabilized, we no longer store these generator witness fields directly, but instead behind a def-id based query. That means there is no technical obstacle in the compiler preventing coroutines from containing themselves per se, other than the fact that for a coroutine to have a non-infinite layout, it must contain itself wrapped in a layer of allocation indirection (like a `Box`).
This means that it should be valid for this code to work:
```
async fn async_fibonacci(i: u32) -> u32 {
if i == 0 || i == 1 {
i
} else {
Box::pin(async_fibonacci(i - 1)).await
+ Box::pin(async_fibonacci(i - 2)).await
}
}
```
Whereas previously, you'd need to coerce the future to `Pin<Box<dyn Future<Output = ...>>` before `await`ing it, to prevent the async's desugared coroutine from containing itself across as await point.
This PR does two things:
1. Only report an error if an opaque expansion cycle is detected *not* through coroutine witness fields.
* Instead, if we find an opaque cycle through coroutine witness fields, we compute the layout of the coroutine. If that results in a cycle error, we report it as a recursive async fn.
4. Reworks the way we report layout errors having to do with coroutines, to make up for the diagnostic regressions introduced by (1.). We actually do even better now, pointing out the call sites of the recursion!
Add helper for when we want to know if an item has a host param
r? ````@fmease```` since you're a good reviewer and no good deed goes unpunished
This helper will see far more usages as built-in traits get constified.
Improved support of collapse_debuginfo attribute for macros.
Added walk_chain_collapsed function to consider collapse_debuginfo attribute in parent macros in call chain.
Fixed collapse_debuginfo attribute processing for cranelift (there was if/else branches error swap).
cc https://github.com/rust-lang/rust/issues/100758
This works for most of its call sites. This is nice, because `emit` very
much makes sense as a consuming operation -- indeed,
`DiagnosticBuilderState` exists to ensure no diagnostic is emitted
twice, but it uses runtime checks.
For the small number of call sites where a consuming emit doesn't work,
the commit adds `DiagnosticBuilder::emit_without_consuming`. (This will
be removed in subsequent commits.)
Likewise, `emit_unless` becomes consuming. And `delay_as_bug` becomes
consuming, while `delay_as_bug_without_consuming` is added (which will
also be removed in subsequent commits.)
All this requires significant changes to `DiagnosticBuilder`'s chaining
methods. Currently `DiagnosticBuilder` method chaining uses a
non-consuming `&mut self -> &mut Self` style, which allows chaining to
be used when the chain ends in `emit()`, like so:
```
struct_err(msg).span(span).emit();
```
But it doesn't work when producing a `DiagnosticBuilder` value,
requiring this:
```
let mut err = self.struct_err(msg);
err.span(span);
err
```
This style of chaining won't work with consuming `emit` though. For
that, we need to use to a `self -> Self` style. That also would allow
`DiagnosticBuilder` production to be chained, e.g.:
```
self.struct_err(msg).span(span)
```
However, removing the `&mut self -> &mut Self` style would require that
individual modifications of a `DiagnosticBuilder` go from this:
```
err.span(span);
```
to this:
```
err = err.span(span);
```
There are *many* such places. I have a high tolerance for tedious
refactorings, but even I gave up after a long time trying to convert
them all.
Instead, this commit has it both ways: the existing `&mut self -> Self`
chaining methods are kept, and new `self -> Self` chaining methods are
added, all of which have a `_mv` suffix (short for "move"). Changes to
the existing `forward!` macro lets this happen with very little
additional boilerplate code. I chose to add the suffix to the new
chaining methods rather than the existing ones, because the number of
changes required is much smaller that way.
This doubled chainging is a bit clumsy, but I think it is worthwhile
because it allows a *lot* of good things to subsequently happen. In this
commit, there are many `mut` qualifiers removed in places where
diagnostics are emitted without being modified. In subsequent commits:
- chaining can be used more, making the code more concise;
- more use of chaining also permits the removal of redundant diagnostic
APIs like `struct_err_with_code`, which can be replaced easily with
`struct_err` + `code_mv`;
- `emit_without_diagnostic` can be removed, which simplifies a lot of
machinery, removing the need for `DiagnosticBuilderState`.
Avoid specialization in the metadata serialization code
With the exception of a perf-only specialization for byte slices and byte vectors.
This uses the same trick of introducing a new trait and having the Encodable and Decodable derives add a bound to it as used for TyEncoder/TyDecoder. The new code is clearer about which encoder/decoder uses which impl and it reduces the dependency of rustc on specialization, making it easier to remove support for specialization entirely or turn it into a construct that is only allowed for perf optimizations if we decide to do this.
Rollup of 9 pull requests
Successful merges:
- #119208 (coverage: Hoist some complex code out of the main span refinement loop)
- #119216 (Use diagnostic namespace in stdlib)
- #119414 (bootstrap: Move -Clto= setting from Rustc::run to rustc_cargo)
- #119420 (Handle ForeignItem as TAIT scope.)
- #119468 (rustdoc-search: tighter encoding for f index)
- #119628 (remove duplicate test)
- #119638 (fix cyle error when suggesting to use associated function instead of constructor)
- #119640 (library: Fix warnings in rtstartup)
- #119642 (library: Fix a symlink test failing on Windows)
r? `@ghost`
`@rustbot` modify labels: rollup
fix cyle error when suggesting to use associated function instead of constructor
Fixes https://github.com/rust-lang/rust/issues/119625.
The first commit fixes the infinite recursion and makes the cycle error actually show up. We do this by making the `Display` for `ty::Instance` impl respect `with_no_queries` so that it can be used in query descriptions.
The second commit fixes the cycle error `resolver_for_lowering` -> `normalize` -> `resolve_instance` (for evaluating const) -> `lang_items` (for `drop_in_place`) -> `resolver_for_lowering` (for collecting lang items). We do this by simply skipping the suggestion when encountering an unnormalized type.
Rollup of 8 pull requests
Successful merges:
- #119151 (Hide foreign `#[doc(hidden)]` paths in import suggestions)
- #119350 (Imply outlives-bounds on lazy type aliases)
- #119354 (Make `negative_bounds` internal & fix some of its issues)
- #119506 (Use `resolutions(()).effective_visiblities` to avoid cycle errors in `report_object_error`)
- #119554 (Fix scoping for let chains in match guards)
- #119563 (Check yield terminator's resume type in borrowck)
- #119589 (cstore: Remove unnecessary locking from `CrateMetadata`)
- #119622 (never patterns: Document behavior of never patterns with macros-by-example)
r? `@ghost`
`@rustbot` modify labels: rollup
Check yield terminator's resume type in borrowck
In borrowck, we didn't check that the lifetimes of the `TerminatorKind::Yield`'s `resume_place` were actually compatible with the coroutine's signature. That means that the lifetimes were totally going unchecked. Whoops!
This PR implements this checking.
Fixes#119564
r? types
Fix scoping for let chains in match guards
If let guards were previously represented as a different type of guard in HIR and THIR. This meant that let chains in match guards were not handled correctly because they were treated exactly like normal guards.
- Remove `hir::Guard` and `thir::Guard`.
- Make the scoping different between normal guards and if let guards also check for let chains.
closes#118593
Hide foreign `#[doc(hidden)]` paths in import suggestions
Stops the compiler from suggesting to import foreign `#[doc(hidden)]` paths.
```@rustbot``` label A-suggestion-diagnostics
Replace a number of FxHashMaps/Sets with stable-iteration-order alternatives
This PR replaces almost all of the remaining `FxHashMap`s in query results with either `FxIndexMap` or `UnordMap`. The only case that is missing is the `EffectiveVisibilities` struct which turned out to not be straightforward to transform. Once that is done too, we can remove the `HashStable` implementation from `HashMap`.
The first commit adds the `StableCompare` trait which is a companion trait to `StableOrd`. Some types like `Symbol` can be compared in a cross-session stable way, but their `Ord` implementation is not stable. In such cases, a `StableCompare` implementation can be provided to offer a lightweight way for stable sorting. The more heavyweight option is to sort via `ToStableHashKey`, but then sorting needs to have access to a stable hashing context and `ToStableHashKey` can also be expensive as in the case of `Symbol` where it has to allocate a `String`.
The rest of the commits are rather mechanical and don't overlap, so they are best reviewed individually.
Part of [MCP 533](https://github.com/rust-lang/compiler-team/issues/533).
Remove `-Zdump-mir-spanview`
The `-Zdump-mir-spanview` flag was added back in #76074, as a development/debugging aid for the initial work on what would eventually become `-Cinstrument-coverage`. It causes the compiler to emit an HTML file containing a function's source code, with various spans highlighted based on the contents of MIR.
When the suggestion was made to [triage and remove unnecessary `-Z` flags (Zulip)](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/.60-Z.60.20option.20triage), I noted that this flag could potentially be worth removing, but I wanted to keep it around to see whether I found it useful for my own coverage work.
But when I actually tried to use it, I ran into various issues (e.g. it crashes on `tests/coverage/closure.rs`). If I can't trust it to work properly without a full overhaul, then instead of diving down a rabbit hole of trying to fix arcane span-handling bugs, it seems better to just remove this obscure old code entirely.
---
````@rustbot```` label +A-code-coverage
Tweak suggestions for bare trait used as a type
```
error[E0782]: trait objects must include the `dyn` keyword
--> $DIR/not-on-bare-trait-2021.rs:11:11
|
LL | fn bar(x: Foo) -> Foo {
| ^^^
|
help: use a generic type parameter, constrained by the trait `Foo`
|
LL | fn bar<T: Foo>(x: T) -> Foo {
| ++++++++ ~
help: you can also use `impl Foo`, but users won't be able to specify the type paramer when calling the `fn`, having to rely exclusively on type inference
|
LL | fn bar(x: impl Foo) -> Foo {
| ++++
help: alternatively, use a trait object to accept any type that implements `Foo`, accessing its methods at runtime using dynamic dispatch
|
LL | fn bar(x: &dyn Foo) -> Foo {
| ++++
error[E0782]: trait objects must include the `dyn` keyword
--> $DIR/not-on-bare-trait-2021.rs:11:19
|
LL | fn bar(x: Foo) -> Foo {
| ^^^
|
help: use `impl Foo` to return an opaque type, as long as you return a single underlying type
|
LL | fn bar(x: Foo) -> impl Foo {
| ++++
help: alternatively, you can return an owned trait object
|
LL | fn bar(x: Foo) -> Box<dyn Foo> {
| +++++++ +
```
Fix#119525:
```
error[E0038]: the trait `Ord` cannot be made into an object
--> $DIR/bare-trait-dont-suggest-dyn.rs:3:33
|
LL | fn ord_prefer_dot(s: String) -> Ord {
| ^^^ `Ord` cannot be made into an object
|
note: for a trait to be "object safe" it needs to allow building a vtable to allow the call to be resolvable dynamically; for more information visit <https://doc.rust-lang.org/reference/items/traits.html#object-safety>
--> $SRC_DIR/core/src/cmp.rs:LL:COL
|
= note: the trait cannot be made into an object because it uses `Self` as a type parameter
::: $SRC_DIR/core/src/cmp.rs:LL:COL
|
= note: the trait cannot be made into an object because it uses `Self` as a type parameter
help: consider using an opaque type instead
|
LL | fn ord_prefer_dot(s: String) -> impl Ord {
| ++++
```
Reorder check_item_type diagnostics so they occur next to the corresponding `check_well_formed` diagnostics
The first commit is just a cleanup.
The second commit moves most checks from `check_mod_item_types` into `check_well_formed`, invoking the checks in lockstep per-item instead of iterating over all items twice.
StableCompare is a companion trait to `StableOrd`. Some types like `Symbol` can be compared in a cross-session stable way, but their `Ord` implementation is not stable. In such cases, a `StableOrd` implementation can be provided to offer a lightweight way for stable sorting. (The more heavyweight option is to sort via `ToStableHashKey`, but then sorting needs to have access to a stable hashing context and `ToStableHashKey` can also be expensive as in the case of `Symbol` where it has to allocate a `String`.)
Because it's redundant w.r.t. `Diagnostic::is_lint`, which is present
for every diagnostic level.
`struct_lint_level_impl` was the only place that set the `Error` field
to `true`, and it's also the only place that calls
`Diagnostic::is_lint()` to set the `is_lint` field.
`Diagnostic` has 40 methods that return `&mut Self` and could be
considered setters. Four of them have a `set_` prefix. This doesn't seem
necessary for a type that implements the builder pattern. This commit
removes the `set_` prefixes on those four methods.
Fix `<BoundConstness as Display>`
There was infinite recursion, which is not very good. I'm not sure what the best way to implement this is, I just did something that felt right.
r? `@fmease`
This involves lots of breaking changes. There are two big changes that
force changes. The first is that the bitflag types now don't
automatically implement normal derive traits, so we need to derive them
manually.
Additionally, bitflags now have a hidden inner type by default, which
breaks our custom derives. The bitflags docs recommend using the impl
form in these cases, which I did.
Introduce `const Trait` (always-const trait bounds)
Feature `const_trait_impl` currently lacks a way to express “always const” trait bounds. This makes it impossible to define generic items like fns or structs which contain types that depend on const method calls (\*). While the final design and esp. the syntax of effects / keyword generics isn't set in stone, some version of “always const” trait bounds will very likely form a part of it. Further, their implementation is trivial thanks to the `effects` backbone.
Not sure if this needs t-lang sign-off though.
(\*):
```rs
#![feature(const_trait_impl, effects, generic_const_exprs)]
fn compute<T: const Trait>() -> Type<{ T::generate() }> { /*…*/ }
struct Store<T: const Trait>
where
Type<{ T::generate() }>:,
{
field: Type<{ T::generate() }>,
}
```
Lastly, “always const” trait bounds are a perfect fit for `generic_const_items`.
```rs
#![feature(const_trait_impl, effects, generic_const_items)]
const DEFAULT<T: const Default>: T = T::default();
```
Previously, we (oli, fee1-dead and I) wanted to reinterpret `~const Trait` as `const Trait` in generic const items which would've been quite surprising and not very generalizable.
Supersedes #117530.
---
cc `@oli-obk`
As discussed
r? fee1-dead (or compiler)
Clean up some lifetimes in `rustc_pattern_analysis`
This PR removes some redundant lifetimes. I figured out that we were shortening the lifetime of an arena-allocated `&'p DeconstructedPat<'p>` to `'a DeconstructedPat<'p>`, which forced us to carry both lifetimes when we could otherwise carry just one.
This PR also removes and elides some unnecessary lifetimes.
I also cherry-picked 0292eb9bb9b897f5c0926c6a8530877f67e7cc9b, and then simplified more lifetimes in `MatchVisitor`, which should make #119233 a very simple PR!
r? Nadrieril
rework `-Zverbose`
implements the changes described in https://github.com/rust-lang/compiler-team/issues/706
the first commit is only a name change from `-Zverbose` to `-Zverbose-internals` and does not change behavior. the second commit changes diagnostics.
possible follow up work:
- `ty::pretty` could print more info with `--verbose` than it does currently. `-Z verbose-internals` shows too much info in a way that's not helpful to users. michael had ideas about this i didn't fully understand: https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/uplift.20some.20-Zverbose.20calls.20and.20rename.20to.E2.80.A6.20compiler-team.23706/near/408984200
- `--verbose` should imply `-Z write-long-types-to-disk=no`. the code in `ty_string_with_limit` should take `--verbose` into account (apparently this affects `Ty::sort_string`, i'm not familiar with this code). writing a file to disk should suggest passing `--verbose`.
r? `@compiler-errors` cc `@estebank`
Make closures carry their own ClosureKind
Right now, we use the "`movability`" field of `hir::Closure` to distinguish a closure and a coroutine. This is paired together with the `CoroutineKind`, which is located not in the `hir::Closure`, but the `hir::Body`. This is strange and redundant.
This PR introduces `ClosureKind` with two variants -- `Closure` and `Coroutine`, which is put into `hir::Closure`. The `CoroutineKind` is thus removed from `hir::Body`, and `Option<Movability>` no longer needs to be a stand-in for "is this a closure or a coroutine".
r? eholk
Remove `DiagCtxt` API duplication
`DiagCtxt` defines the internal API for creating and emitting diagnostics: methods like `struct_err`, `struct_span_warn`, `note`, `create_fatal`, `emit_bug`. There are over 50 methods.
Some of these methods are then duplicated across several other types: `Session`, `ParseSess`, `Parser`, `ExtCtxt`, and `MirBorrowckCtxt`. `Session` duplicates the most, though half the ones it does are unused. Each duplicated method just calls forward to the corresponding method in `DiagCtxt`. So this duplication exists to (in the best case) shorten chains like `ecx.tcx.sess.parse_sess.dcx.emit_err()` to `ecx.emit_err()`.
This API duplication is ugly and has been bugging me for a while. And it's inconsistent: there's no real logic about which methods are duplicated, and the use of `#[rustc_lint_diagnostic]` and `#[track_caller]` attributes vary across the duplicates.
This PR removes the duplicated API methods and makes all diagnostic creation and emission go through `DiagCtxt`. It also adds `dcx` getter methods to several types to shorten chains. This approach scales *much* better than API duplication; indeed, the PR adds `dcx()` to numerous types that didn't have API duplication: `TyCtxt`, `LoweringCtxt`, `ConstCx`, `FnCtxt`, `TypeErrCtxt`, `InferCtxt`, `CrateLoader`, `CheckAttrVisitor`, and `Resolver`. These result in a lot of changes from `foo.tcx.sess.emit_err()` to `foo.dcx().emit_err()`. (You could do this with more types, but it gets into diminishing returns territory for types that don't emit many diagnostics.)
After all these changes, some call sites are more verbose, some are less verbose, and many are the same. The total number of lines is reduced, mostly because of the removed API duplication. And consistency is increased, because calls to `emit_err` and friends are always preceded with `.dcx()` or `.dcx`.
r? `@compiler-errors`
Unify SourceFile::name_hash and StableSourceFileId
This PR adapts the existing `StableSourceFileId` type so that it can be used instead of the `name_hash` field of `SourceFile`. This simplifies a few things that were kind of duplicated before.
The PR should also fix issues https://github.com/rust-lang/rust/issues/112700 and https://github.com/rust-lang/rust/issues/115835, but I was not able to reproduce these issues in a regression test. As far as I can tell, the root cause of these issues is that the id of the originating crate is not hashed in the `HashStable` impl of `Span` and thus cache entries that should have been considered invalidated were loaded. After this PR, the `stable_id` field of `SourceFile` includes information about the originating crate, so that ICE should not occur anymore.
Split coroutine desugaring kind from source
What a coroutine is desugared from (gen/async gen/async) should be separate from where it comes (fn/block/closure).
`IntoDiagnostic` defaults to `ErrorGuaranteed`, because errors are the
most common diagnostic level. It makes sense to do likewise for the
closely-related (and much more widely used) `DiagnosticBuilder` type,
letting us write `DiagnosticBuilder<'a, ErrorGuaranteed>` as just
`DiagnosticBuilder<'a>`. This cuts over 200 lines of code due to many
multi-line things becoming single line things.
We can just get the error level in the `match` and then use
`DiagnosticBuilder::new`. This then means a number of `DiagCtxt`
functions are no longer needed, because this was the one place that used
them.
Note: the commit changes the treatment of spans for `Expect`, which was
different to all the other cases, but this has no apparent effect.
-Znext-solver: adapt overflow rules to avoid breakage
Do not erase overflow constraints if they are from equating the impl header when normalizing[^1].
This should be the minimal change to not break crates depending on the old project behavior of "apply impl constraints while only lazily evaluating any nested goals".
Fixes https://github.com/rust-lang/trait-system-refactor-initiative/issues/70, see https://hackmd.io/ATf4hN0NRY-w2LIVgeFsVg for the reasoning behind this.
Only keeping constraints on overflow for `normalize-to` goals as that's the only thing needed for backcompat. It also allows us to not track the origin of root obligations. The issue with root goals would be something like the following:
```rust
trait Foo {}
trait Bar {}
trait FooBar {}
impl<T: Foo + Bar> FooBar for T {}
// These two should behave the same, rn we can drop constraints for both,
// but if we don't drop `Misc` goals we would only drop the constraints for
// `FooBar` unless we track origins of root obligations.
fn func1<T: Foo + Bar>() {}
fn func2<T: FooBaz>() {}
```
[^1]: mostly, the actual rules are slightly different
r? ``@compiler-errors``
Replace some instances of FxHashMap/FxHashSet with stable alternatives (mostly in rustc_hir and rustc_ast_lowering)
Part of https://github.com/rust-lang/compiler-team/issues/533. We should be getting close to being able to remove the HashStable impl of HashMap.
And make all hand-written `IntoDiagnostic` impls generic, by using
`DiagnosticBuilder::new(dcx, level, ...)` instead of e.g.
`dcx.struct_err(...)`.
This means the `create_*` functions are the source of the error level.
This change will let us remove `struct_diagnostic`.
Note: `#[rustc_lint_diagnostics]` is added to `DiagnosticBuilder::new`,
it's necessary to pass diagnostics tests now that it's used in
`into_diagnostic` functions.
Don't pass lint back out of lint decorator
Change the decorator function in the signature of the `emit_lint`/`span_lint`/etc family of methods from `impl for<'a, 'b> FnOnce(&'b mut DiagnosticBuilder<'a, ()>) -> &'b mut DiagnosticBuilder<'a, ()>` to `impl for<'a, 'b> FnOnce(&'b mut DiagnosticBuilder<'a, ()>)`. I consider it easier to read this way, especially when there's control flow involved.
r? nnethercote though feel free to reassign
Uplift `TypeAndMut` and `ClosureKind` to `rustc_type_ir`
Uplifts `TypeAndMut` and `ClosureKind`
I know I said I was just going to get rid of `TypeAndMut` (https://github.com/rust-lang/types-team/issues/124) but I think this is much simpler, lol
r? `@jackh726` or `@lcnr`
cache param env canonicalization
Canonicalize ParamEnv only once and store it. Then whenever we try to canonicalize `ParamEnvAnd<'tcx, T>` we only have to canonicalize `T` and then merge the results.
Prelimiary results show ~3-4% savings in diesel and serde benchmarks.
Best to review commits individually. Some commits have a short description.
Initial implementation had a soundness bug (https://github.com/rust-lang/rust/pull/117749#issuecomment-1840453387) due to cache invalidation:
- When canonicalizing `Ty<'?0>` we first try to resolve region variables in the current InferCtxt which may have a constraint `?0 == 'static`. This means that we register `Ty<'?0> => Canonical<Ty<'static>>` in the cache, which is obviously incorrect in another inference context.
- This is fixed by not doing region resolution when canonicalizing the query *input* (vs. response), which is the only place where ParamEnv is used, and then in a later commit we *statically* guard against any form of inference variable resolution of the cached canonical ParamEnv's.
r? `@ghost`
This doesn't change behavior.
It should prevent unintentional resolution of inference variables
during canonicalization, which previously caused a soundness bug.
See PR description for more.
ParamEnv is canonicalized in *queries input* rather than query response.
In such case we don't "preserve universes" of canonical variable.
This means that `universe_map` always has the default value, which is
wasteful to store in the cache.
Renamings:
- find -> opt_hir_node
- get -> hir_node
- find_by_def_id -> opt_hir_node_by_def_id
- get_by_def_id -> hir_node_by_def_id
Fix rebase changes using removed methods
Use `tcx.hir_node_by_def_id()` whenever possible in compiler
Fix clippy errors
Fix compiler
Apply suggestions from code review
Co-authored-by: Vadim Petrochenkov <vadim.petrochenkov@gmail.com>
Add FIXME for `tcx.hir()` returned type about its removal
Simplify with with `tcx.hir_node_by_def_id`
Make most `rustc_type_ir` kinds `Copy` by default
1. There's no reason why `TyKind` and `ConstKind`/`ConstData` can't be `Copy`. This allows us to avoid needing a typed arena for the two types.
2. Simplify some impls into derives.
remove redundant imports
detects redundant imports that can be eliminated.
for #117772 :
In order to facilitate review and modification, split the checking code and removing redundant imports code into two PR.
r? `@petrochenkov`
Don't print host effect param in pretty `path_generic_args`
Make `own_args_no_defaults` pass back the `GenericParamDef`, so that we can pass both the args *and* param definitions into `path_generic_args`. That allows us to use the `GenericParamDef` to filter out effect params.
This allows us to filter out the host param regardless of whether it's `sym::host` or `true`/`false`.
This also renames a couple of `const_effect_param` -> `host_effect_param`, and restores `~const` pretty printing to `TraitPredPrintModifiersAndPath`.
cc #118785
r? `@fee1-dead` cc `@oli-obk`
detects redundant imports that can be eliminated.
for #117772 :
In order to facilitate review and modification, split the checking code and
removing redundant imports code into two PR.
Don't warn an empty pattern unreachable if we're not sure the data is valid
Exhaustiveness checking used to be naive about the possibility of a place containing invalid data. This could cause it to emit an "unreachable pattern" lint on an arm that was in fact reachable, as in https://github.com/rust-lang/rust/issues/117119.
This PR fixes that. We now track whether a place that is matched on may hold invalid data. This also forced me to be extra precise about how exhaustiveness manages empty types.
Note that this now errs in the opposite direction: the following arm is truly unreachable (because the binding causes a read of the value) but not linted as such. I'd rather not recommend writing a `match ... {}` that has the implicit side-effect of loading the value. [Never patterns](https://github.com/rust-lang/rust/issues/118155) will solve this cleanly.
```rust
match union.value {
_x => unreachable!(),
}
```
I recommend reviewing commit by commit. I went all-in on the test suite because this went through a lot of iterations and I kept everything. The bit I'm least confident in is `is_known_valid_scrutinee` in `check_match.rs`.
Fixes https://github.com/rust-lang/rust/issues/117119.
coverage: Use `SpanMarker` to improve coverage spans for `if !` expressions
Coverage instrumentation works by extracting source code spans from MIR. However, some kinds of syntax are effectively erased during MIR building, so their spans don't necessarily exist anywhere in MIR, making them invisible to the coverage instrumentor (unless we resort to various heuristics and hacks to recover them).
This PR introduces `CoverageKind::SpanMarker`, which is a new variant of `StatementKind::Coverage`. Its sole purpose is to represent spans that would otherwise not appear in MIR, so that the coverage instrumentor can extract them.
When coverage is enabled, the MIR builder can insert these dummy statements as needed, to improve the accuracy of spans used by coverage mappings.
Fixes#115468.
---
```@rustbot``` label +A-code-coverage
Rollup of 6 pull requests
Successful merges:
- #117586 (Uplift the (new solver) canonicalizer into `rustc_next_trait_solver`)
- #118502 (fix: correct the arg for 'suggest to use associated function syntax' diagnostic)
- #118694 (Add instance evaluation and methods to read an allocation in StableMIR)
- #118715 (privacy: visit trait def id of projections)
- #118730 (recurse into refs when comparing tys for diagnostics)
- #118736 (temporarily revert "ice on ambguity in mir typeck")
r? `@ghost`
`@rustbot` modify labels: rollup
This is for post-monomorphization cycles. These are only caught later
(in drop elaboration for the example that I saw), so we need to handle
them here.
This issue wasn't noticed before because exhaustiveness only checked
inhabitedness when `exhaustive_patterns` was on. The preceding commit
now check inhabitedness always, which revealed the problem.
Uplift the (new solver) canonicalizer into `rustc_next_trait_solver`
Uplifts the new trait solver's canonicalizer into a new crate called `rustc_next_trait_solver`.
The crate name is literally a bikeshed-avoidance name, so let's not block this PR on that -- renames are welcome later.
There are a host of other changes that were required to make this possible:
* Expose a `ConstTy` trait to get the `Interner::Ty` from a `Interner::Const`.
* Expose some constructor methods to construct `Bound` variants. These are currently methods defined on the interner themselves, but they could be pulled into traits later.
* Expose a `IntoKind` trait to turn a `Ty`/`Const`/`Region` into their corresponding `*Kind`s.
* Some minor tweaks to other APIs in `rustc_type_ir`.
The canonicalizer code itself is best reviewed **with whitespace ignored.**
r? ``@lcnr``
Explicitly implement `DynSync` and `DynSend` for `TyCtxt`
This is an attempt to short circuit trait resolution. It should get a perf run for bootstrap impact.
There are cases where coverage instrumentation wants to show a span for some
syntax element, but there is no MIR node that naturally carries that span, so
the instrumentor can't see it.
MIR building can now use this new kind of coverage statement to deliberately
include those spans in MIR, attached to a dummy statement that has no other
effect.
Avoid adding builtin functions to `symbols.o`
We found performance regressions in #113923. The problem seems to be that `--gc-sections` does not remove these symbols. I tested that lld removes these symbols, but ld and gold do not.
I found that `used` adds symbols to `symbols.o` at 3e202ead60/compiler/rustc_codegen_ssa/src/back/linker.rs (L1786-L1791).
The PR removes builtin functions.
Note that under LTO, ld still preserves these symbols. (lld will still remove them.)
The first commit also fixes#118559. But I think the second commit also makes sense.
compile-time evaluation: detect writes through immutable pointers
This has two motivations:
- it unblocks https://github.com/rust-lang/rust/pull/116745 (and therefore takes a big step towards `const_mut_refs` stabilization), because we can now detect if the memory that we find in `const` can be interned as "immutable"
- it would detect the UB that was uncovered in https://github.com/rust-lang/rust/pull/117905, which was caused by accidental stabilization of `copy` functions in `const` that can only be called with UB
When UB is detected, we emit a future-compat warn-by-default lint. This is not a breaking change, so completely in line with [the const-UB RFC](https://rust-lang.github.io/rfcs/3016-const-ub.html), meaning we don't need t-lang FCP here. I made the lint immediately show up for dependencies since it is nearly impossible to even trigger this lint without `const_mut_refs` -- the accidentally stabilized `copy` functions are the only way this can happen, so the crates that popped up in #117905 are the only causes of such UB (in the code that crater covers), and the three cases of UB that we know about have all been fixed in their respective crates already.
The way this is implemented is by making use of the fact that our interpreter is already generic over the notion of provenance. For CTFE we now use the new `CtfeProvenance` type which is conceptually an `AllocId` plus a boolean `immutable` flag (but packed for a more efficient representation). This means we can mark a pointer as immutable when it is created as a shared reference. The flag will be propagated to all pointers derived from this one. We can then check the immutable flag on each write to reject writes through immutable pointers.
I just hope perf works out.
`EvaluatedToUnknown` -> `EvaluatedToAmbigStackDependent`, `EvaluatedToRecur` -> `EvaluatedToErrStackDependent`
Less confusing names, since the only difference between them and their parallel `EvalutedTo..` is that they are stack dependent.
r? lcnr
Remove `PolyGenSig` since it's always a dummy binder
Coroutines are never polymorphic in their signature. This cleans up a FIXME in the code:
```
/// Returns the "coroutine signature", which consists of its yield
/// and return types.
///
/// N.B., some bits of the code prefers to see this wrapped in a
/// binder, but it never contains bound regions. Probably this
/// function should be removed.
```
rustc_arena: add `alloc_str`
Two places called `from_utf8_unchecked` for strings from `alloc_slice`,
and one's SAFETY comment said this was for lack of `alloc_str` -- so
let's just add that instead!
Remove `#[rustc_host]`, use internal desugaring
Also removed a way for users to explicitly specify the host param since that isn't particularly useful. This should eliminate any pain with encoding attributes across crates and etc.
r? `@compiler-errors`
Two places called `from_utf8_unchecked` for strings from `alloc_slice`,
and one's SAFETY comment said this was for lack of `alloc_str` -- so
let's just add that instead!
`DefPathData::(ClosureExpr,ImplTrait)` are renamed to match `DefKind::(Closure,OpaqueTy)`.
`DefPathData::ImplTraitAssocTy` is replaced with `DefPathData::TypeNS(kw::Empty)` because both correspond to `DefKind::AssocTy`.
It's possible that introducing `(DefKind,DefPathData)::AssocOpaqueTy` could be a better solution, but that would be a much more invasive change.
Const generic parameters introduced for effects are moved from `DefPathData::TypeNS` to `DefPathData::ValueNS`, because constants are values.
`DefPathData` is no longer passed to `create_def` functions to avoid redundancy.
Fix `PartialEq` args when `#[const_trait]` is enabled
This is based off of your PR that enforces effects on all methods, so just see the last commits.
r? fee1-dead
Add `never_patterns` feature gate
This PR adds the feature gate and most basic parsing for the experimental `never_patterns` feature. See the tracking issue (https://github.com/rust-lang/rust/issues/118155) for details on the experiment.
`@scottmcm` has agreed to be my lang-team liaison for this experiment.
Call FileEncoder::finish in rmeta encoding
Fixes https://github.com/rust-lang/rust/issues/117254
The bug here was that rmeta encoding never called FileEncoder::finish. Now it does. Most of the changes here are needed to support that, since rmeta encoding wants to finish _then_ access the File in the encoder, so finish can't move out.
I tried adding a `cfg(debug_assertions)` exploding Drop impl to FileEncoder that checked for finish being called before dropping, but fatal errors cause unwinding so this isn't really possible. If we encounter a fatal error with a dirty FileEncoder, the Drop impl ICEs even though the implementation is correct. If we try to paper over that by wrapping FileEncoder in ManuallyDrop then that just erases the fact that Drop automatically checks that we call finish on all paths.
I also changed the name of DepGraph::encode to DepGraph::finish_encoding, because that's what it does and it makes the fact that it is the path to FileEncoder::finish less confusing.
r? `@WaffleLapkin`
Currently we always do this:
```
use rustc_fluent_macro::fluent_messages;
...
fluent_messages! { "./example.ftl" }
```
But there is no need, we can just do this everywhere:
```
rustc_fluent_macro::fluent_messages! { "./example.ftl" }
```
which is shorter.
The `fluent_messages!` macro produces uses of
`crate::{D,Subd}iagnosticMessage`, which means that every crate using
the macro must have this import:
```
use rustc_errors::{DiagnosticMessage, SubdiagnosticMessage};
```
This commit changes the macro to instead use
`rustc_errors::{D,Subd}iagnosticMessage`, which avoids the need for the
imports.
Remove `HirId` from `QPath::LangItem`
Remove `HirId` from `QPath::LangItem`, since there was only *one* use-case (`ObligationCauseCode::AwaitableExpr`), which we can instead recover by walking the HIR tree.
Optimize QueryArena allocation
This shifts the WorkerLocal wrapper to be outside the QueryArena, meaning that instead of having each query allocate distinct arenas per-worker we allocate the full set of arenas per-worker. This is primarily a code size optimization (locally, ~85 kilobytes, [perf is reporting >100 kilobytes](https://perf.rust-lang.org/compare.html?start=1fd418f92ed13db88a21865ba5d909abcf16b6cc&end=884c95a3f1fe8d28630ec3cdb0c8f95b2e539fde&stat=instructions%3Au&tab=artifact-size)), saving a bunch of code in the initialization of the arenas which was previously duplicated lots of times (per arena type).
Additionally this tells LLVM that the thread count can't be zero in this code (I believe this is true?) which shaves some small amount of bytes off as well since we eliminate checks for zero in the vec allocations.
Cache flags for `ty::Const`
Not sure if this has been attempted yet, but worth a shot. It does make the code simpler in `rustc_type_ir`, since we can assume that consts have a `flags` method that is no-cost.
r? `@ghost`
Remove `PredicateKind::ClosureKind`
We don't need the `ClosureKind` predicate kind -- instead, `Fn`-family trait goals are left as ambiguous, and we only need to make progress on `FnOnce` projection goals for inference purposes.
This is similar to how we do confirmation of `Fn`-family trait and projection goals in the new trait solver, which also doesn't use the `ClosureKind` predicate.
Some hacky logic is added in the second commit so that we can keep the error messages the same.
Rollup of 6 pull requests
Successful merges:
- #118012 (Add support for global allocation in smir)
- #118013 (Enable Rust to use the EHCont security feature of Windows)
- #118100 (Enable profiler in dist-powerpc64-linux)
- #118142 (Tighten up link attributes for llvm-wrapper bindings)
- #118147 (Fix some unnecessary casts)
- #118161 (Allow defining opaques in `check_coroutine_obligations`)
r? `@ghost`
`@rustbot` modify labels: rollup
Allow defining opaques in `check_coroutine_obligations`
In the new trait solver, when an obligation stalls on an unresolved coroutine witness, we will stash away the *root* obligation, even if the stalled obligation is only a distant descendent of the root obligation, since the new solver is purely recursive.
This means that we may need to reprocess alias-relate obligations (and others) which may define opaque types in the new solver. Currently, we use the coroutine's def id as the defining anchor in `check_coroutine_obligations`, which will allow defining no opaque types, resulting in errors like:
```
error[E0271]: type mismatch resolving `{coroutine@<source>:6:5: 6:17} <: impl Clone`
--> <source>:6:5
|
6 | / move |_: ()| {
7 | | let () = yield ();
8 | | }
| |_____^ types differ
```
So this PR fixes the defining anchor and does the same trick as `check_opaque_well_formed`, where we manually compare opaques that were defined against their hidden types to make sure they weren't defined differently when processing these stalled coroutine obligations.
r? `@lcnr` cc `@cjgillot`
By default, `newtype_index!` types get a default `Encodable`/`Decodable`
impl. You can opt out of this with `custom_encodable`. Opting out is the
opposite to how Rust normally works with autogenerated (derived) impls.
This commit inverts the behaviour, replacing `custom_encodable` with
`encodable` which opts into the default `Encodable`/`Decodable` impl.
Only 23 of the 59 `newtype_index!` occurrences need `encodable`.
Even better, there were eight crates with a dependency on
`rustc_serialize` just from unused default `Encodable`/`Decodable`
impls. This commit removes that dependency from those eight crates.
Uplift `CanonicalVarInfo` and friends into `rustc_type_ir`
Depends on #117580 and #117578
Uplift `CanonicalVarInfo` and friends into `rustc_type_ir` so they can be consumed by an interner-agnostic `Canonicalizer` implementation for the new trait solver ❤️
r? `@ghost`
Rollup of 5 pull requests
Successful merges:
- #117972 (Add VarDebugInfo to Stable MIR)
- #118109 (rustdoc-search: simplify `checkPath` and `sortResults`)
- #118110 (Document `DefiningAnchor` a bit more)
- #118112 (Don't ICE when ambiguity is found when selecting `Index` implementation in typeck)
- #118135 (Remove quotation from filename in stable_mir)
Failed merges:
- #118012 (Add support for global allocation in smir)
r? `@ghost`
`@rustbot` modify labels: rollup
Expand Miri's BorTag GC to a Provenance GC
As suggested in https://github.com/rust-lang/miri/issues/3080#issuecomment-1732505573
We previously solved memory growth issues associated with the Stacked Borrows and Tree Borrows runtimes with a GC. But of course we also have state accumulation associated with whole allocations elsewhere in the interpreter, and this PR starts tackling those.
To do this, we expand the visitor for the GC so that it can visit a BorTag or an AllocId. Instead of collecting all live AllocIds into a single HashSet, we just collect from the Machine itself then go through an accessor `InterpCx::is_alloc_live` which checks a number of allocation data structures in the core interpreter. This avoids the overhead of all the inserts that collecting their keys would require.
r? ``@RalfJung``
Rollup of 8 pull requests
Successful merges:
- #117327 (Add documentation for some queries)
- #117835 (Note about object lifetime defaults in does not live long enough error)
- #117851 (Uplift `InferConst` to `rustc_type_ir`)
- #117973 (test: Add test for async-move in 2015 Rust proc macro)
- #117992 (Don't require intercrate mode for negative coherence)
- #118010 (Typeck break expr even if break is illegal)
- #118026 (Don't consider regions in `deref_into_dyn_supertrait` lint)
- #118089 (intercrate_ambiguity_causes: handle self ty infer + reservation impls)
r? `@ghost`
`@rustbot` modify labels: rollup
Uplift `InferConst` to `rustc_type_ir`
We need this in `rustc_type_ir` because the canonicalizer must understand the difference between a const vid and an effect vid. In that way, it's not an implementation detail of the representation of an infer const, but just part of the type ir.
If we find out later on that it's better to leave the representation up to the consumer of `rustc_type_ir`, we could abstract `InferConst` (and probably `InferTy` as well) with some traits, but I don't see the benefit of that indirection currently.
Note about object lifetime defaults in does not live long enough error
This is a aspect of Rust that frequently trips up people who are not aware of it yet. This diagnostic attempts to explain what's happening and why the lifetime constraint, that was never mentioned in the source, arose.
The implementation feels a bit questionable, I'm not sure whether there are better ways to do this. There probably are.
fixes#117835
r? types
interpret: simplify handling of shifts by no longer trying to handle signed and unsigned shift amounts in the same branch
While we're at it, also update comments in codegen and MIR building related to shifts, and fix the overflow error printed by Miri on negative shift amounts.
