Add `rustc_fluent_macro` to decouple fluent from `rustc_macros`
Fluent, with all the icu4x it brings in, takes quite some time to compile. `fluent_messages!` is only needed in further downstream rustc crates, but is blocking more upstream crates like `rustc_index`. By splitting it out, we allow `rustc_macros` to be compiled earlier, which speeds up `x check compiler` by about 5 seconds (and even more after the needless dependency on `serde_json` is removed from `rustc_data_structures`).
Encode hashes as bytes, not varint
In a few places, we store hashes as `u64` or `u128` and then apply `derive(Decodable, Encodable)` to the enclosing struct/enum. It is more efficient to encode hashes directly than try to apply some varint encoding. This PR adds two new types `Hash64` and `Hash128` which are produced by `StableHasher` and replace every use of storing a `u64` or `u128` that represents a hash.
Distribution of the byte lengths of leb128 encodings, from `x build --stage 2` with `incremental = true`
Before:
```
( 1) 373418203 (53.7%, 53.7%): 1
( 2) 196240113 (28.2%, 81.9%): 3
( 3) 108157958 (15.6%, 97.5%): 2
( 4) 17213120 ( 2.5%, 99.9%): 4
( 5) 223614 ( 0.0%,100.0%): 9
( 6) 216262 ( 0.0%,100.0%): 10
( 7) 15447 ( 0.0%,100.0%): 5
( 8) 3633 ( 0.0%,100.0%): 19
( 9) 3030 ( 0.0%,100.0%): 8
( 10) 1167 ( 0.0%,100.0%): 18
( 11) 1032 ( 0.0%,100.0%): 7
( 12) 1003 ( 0.0%,100.0%): 6
( 13) 10 ( 0.0%,100.0%): 16
( 14) 10 ( 0.0%,100.0%): 17
( 15) 5 ( 0.0%,100.0%): 12
( 16) 4 ( 0.0%,100.0%): 14
```
After:
```
( 1) 372939136 (53.7%, 53.7%): 1
( 2) 196240140 (28.3%, 82.0%): 3
( 3) 108014969 (15.6%, 97.5%): 2
( 4) 17192375 ( 2.5%,100.0%): 4
( 5) 435 ( 0.0%,100.0%): 5
( 6) 83 ( 0.0%,100.0%): 18
( 7) 79 ( 0.0%,100.0%): 10
( 8) 50 ( 0.0%,100.0%): 9
( 9) 6 ( 0.0%,100.0%): 19
```
The remaining 9 or 10 and 18 or 19 are `u64` and `u128` respectively that have the high bits set. As far as I can tell these are coming primarily from `SwitchTargets`.
Fluent, with all the icu4x it brings in, takes quite some time to
compile. `fluent_messages!` is only needed in further downstream rustc
crates, but is blocking more upstream crates like `rustc_index`. By
splitting it out, we allow `rustc_macros` to be compiled earlier, which
speeds up `x check compiler` by about 5 seconds (and even more after the
needless dependency on `serde_json` is removed from
`rustc_data_structures`).
Various minor Idx-related tweaks
Nothing particularly exciting here, but a couple of things I noticed as I was looking for more index conversions to simplify.
cc https://github.com/rust-lang/compiler-team/issues/606
r? `@WaffleLapkin`
incr.comp.: Make sure dependencies are recorded when feeding queries during eval-always queries.
This PR makes sure we don't drop dependency edges when feeding queries during an eval-always query.
Background: During eval-always queries, no dependencies are recorded because the system knows to unconditionally re-evaluate them regardless of any actual dependencies. This works fine for these queries themselves but leads to a problem when feeding other queries: When queries are fed, we set up their dependency edges by copying the current set of dependencies of the feeding query. But because this set is empty for eval-always queries, we record no edges at all -- which has the effect that the fed query instances always look "green" to the system, although they should always be "red".
The fix is to explicitly add a dependency on the artificial "always red" dep-node when feeding during eval-always queries.
Fixes https://github.com/rust-lang/rust/issues/108481
Maybe also fixes issue https://github.com/rust-lang/rust/issues/88488.
cc `@jyn514`
r? `@cjgillot` or `@oli-obk`
Use Rayon's TLV directly
This accesses Rayon's `TLV` thread local directly avoiding wrapper functions. This makes rustc work with https://github.com/rust-lang/rustc-rayon/pull/10.
r? `@cuviper`
Refactor `try_execute_query`
This merges `JobOwner::try_start` into `try_execute_query`, removing `TryGetJob` in the processes. 3 new functions are extracted from `try_execute_query`: `execute_job`, `cycle_error` and `wait_for_query`. This makes the control flow a bit clearer and improves performance.
Based on https://github.com/rust-lang/rust/pull/109046.
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check</td><td align="right">1.7134s</td><td align="right">1.7061s</td><td align="right"> -0.43%</td></tr><tr><td>🟣 <b>hyper</b>:check</td><td align="right">0.2519s</td><td align="right">0.2510s</td><td align="right"> -0.35%</td></tr><tr><td>🟣 <b>regex</b>:check</td><td align="right">0.9517s</td><td align="right">0.9481s</td><td align="right"> -0.38%</td></tr><tr><td>🟣 <b>syn</b>:check</td><td align="right">1.5389s</td><td align="right">1.5338s</td><td align="right"> -0.33%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check</td><td align="right">5.9488s</td><td align="right">5.9258s</td><td align="right"> -0.39%</td></tr><tr><td>Total</td><td align="right">10.4048s</td><td align="right">10.3647s</td><td align="right"> -0.38%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">0.9962s</td><td align="right"> -0.38%</td></tr></table>
r? `@cjgillot`
Split `execute_job` into `execute_job_incr` and `execute_job_non_incr`
`execute_job` was a bit large, so this splits it in 2. Performance was neutral locally, but this may affect bootstrap times.
Optimize dep node backtrace and ignore fatal errors
This attempts to optimize https://github.com/rust-lang/rust/pull/91742 while also passing through fatal errors.
r? `@cjgillot`
Check that a query has not completed and is not executing before starting it
This fixes a race in the query system where we only checked if the query was currently executing, but not if it was already completed, causing queries to re-execute.
r? `@cjgillot`
Ensure value is on the on-disk cache before returning from `ensure()`.
The current logic for `ensure()` a query just checks that the node is green in the dependency graph.
However, a lot of places use `ensure()` to prevent the query from being called later. This is the case before stealing a query result.
If the query is actually green but the value is not available in the on-disk cache, `ensure` would return, but a subsequent call to the full query would run the code, and attempt to read from a stolen value.
This PR conforms the query system to the usage by checking whether the queried value is loadable from disk before returning.
Sadly, I can't manage to craft a proper test...
Should fix all instances of "attempted to read from stolen value".
Simplify message paths
This makes it easier to open the messages file. Right now I have to first click on the `locales` dir to open it, and then on the `en-US.ftl` file. `Cargo.toml` and `build.rs` files are also in the top level, and I think there should not be more than one file, so a directory isn't really needed. The [chosen strategy for pontoon adoption](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/pontoon.20and.20next.20steps) is out of tree. Even if this descision is changed in the future, the `messages.ftl` approach is also compatible with non-english translations living in-tree, as long as the non-english translations don't live in the `compiler/rustc_foo/` directories but in different ones. That would also be helpful for grepability purposes.
The commit was the result of automated changes:
```
for p in compiler/rustc_*; do mv $p/locales/en-US.ftl $p/messages.ftl; rmdir $p/locales; done
for p in compiler/rustc_*; do sed -i "s#\.\./locales/en-US.ftl#../messages.ftl#" $p/src/lib.rs; done
```
r? `@davidtwco`
This makes it easier to open the messages file while developing on features.
The commit was the result of automatted changes:
for p in compiler/rustc_*; do mv $p/locales/en-US.ftl $p/messages.ftl; rmdir $p/locales; done
for p in compiler/rustc_*; do sed -i "s#\.\./locales/en-US.ftl#../messages.ftl#" $p/src/lib.rs; done
Make `rustc_query_system` take `QueryConfig` by instance.
This allows for easy switching between virtual tables and specialized instances for queries. It also has the benefit of less turbofish. `QueryStorage` has also been merged with `QueryCache`.
Split out from https://github.com/rust-lang/rust/pull/107937.
r? `@cjgillot`
errors: generate typed identifiers in each crate
Instead of loading the Fluent resources for every crate in `rustc_error_messages`, each crate generates typed identifiers for its own diagnostics and creates a static which are pulled together in the `rustc_driver` crate and provided to the diagnostic emitter.
There are advantages and disadvantages to this change..
#### Advantages
- Changing a diagnostic now only recompiles the crate for that diagnostic and those crates that depend on it, rather than `rustc_error_messages` and all crates thereafter.
- This approach can be used to support first-party crates that want to supply translatable diagnostics (e.g. `rust-lang/thorin` in https://github.com/rust-lang/rust/pull/102612#discussion_r985372582, cc `@JhonnyBillM)`
- We can extend this a little so that tools built using rustc internals (like clippy or rustdoc) can add their own diagnostic resources (much more easily than those resources needing to be available to `rustc_error_messages`)
#### Disadvantages
- Crates can only refer to the diagnostic messages defined in the current crate (or those from dependencies), rather than all diagnostic messages.
- `rustc_driver` (or some other crate we create for this purpose) has to directly depend on *everything* that has error messages.
- It already transitively depended on all these crates.
#### Pending work
- [x] I don't know how to make `rustc_codegen_gcc`'s translated diagnostics work with this approach - because `rustc_driver` can't depend on that crate and so can't get its resources to provide to the diagnostic emission. I don't really know how the alternative codegen backends are actually wired up to the compiler at all.
- [x] Update `triagebot.toml` to track the moved FTL files.
r? `@compiler-errors`
cc #100717
Instead of loading the Fluent resources for every crate in
`rustc_error_messages`, each crate generates typed identifiers for its
own diagnostics and creates a static which are pulled together in the
`rustc_driver` crate and provided to the diagnostic emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
Use a lock-free datastructure for source_span
follow up to the perf regression in https://github.com/rust-lang/rust/pull/105462
The main regression is likely the CStore, but let's evaluate the perf impact of this on its own
Don't call `with_reveal_all_normalized` in const-eval when `param_env` has inference vars in it
**what:** This slightly shifts the order of operations from an existing hack:
5b6ed253c4/compiler/rustc_middle/src/ty/consts/kind.rs (L225-L230)
in order to avoid calling a tcx query (`TyCtxt::reveal_opaque_types_in_bounds`, via `ParamEnv::with_reveal_all_normalized`) when a param-env has inference variables in it.
**why:** This allows us to enable fingerprinting of query keys/values outside of incr-comp in deubg mode, to make sure we catch other places where we're passing infer vars and other bad things into query keys. Currently that (bbf33836b9) crashes because we introduce inference vars into a param-env in the blanket-impl finder in rustdoc 😓5b6ed253c4/src/librustdoc/clean/blanket_impl.rs (L43)
See the CI failure here: https://github.com/rust-lang/rust/actions/runs/4058194838/jobs/6984834619
Factor query arena allocation out from query caches
This moves the logic for arena allocation out from the query caches into conditional code in the query system. The specialized arena caches are removed. A new `QuerySystem` type is added in `rustc_middle` which contains the arenas, providers and query caches.
Performance seems to be slightly regressed:
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check</td><td align="right">1.8053s</td><td align="right">1.8109s</td><td align="right"> 0.31%</td></tr><tr><td>🟣 <b>hyper</b>:check</td><td align="right">0.2600s</td><td align="right">0.2597s</td><td align="right"> -0.10%</td></tr><tr><td>🟣 <b>regex</b>:check</td><td align="right">0.9973s</td><td align="right">1.0006s</td><td align="right"> 0.34%</td></tr><tr><td>🟣 <b>syn</b>:check</td><td align="right">1.6048s</td><td align="right">1.6051s</td><td align="right"> 0.02%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check</td><td align="right">6.2992s</td><td align="right">6.3159s</td><td align="right"> 0.26%</td></tr><tr><td>Total</td><td align="right">10.9664s</td><td align="right">10.9922s</td><td align="right"> 0.23%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">1.0017s</td><td align="right"> 0.17%</td></tr></table>
Incremental performance is a bit worse:
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check:initial</td><td align="right">2.2103s</td><td align="right">2.2247s</td><td align="right"> 0.65%</td></tr><tr><td>🟣 <b>hyper</b>:check:initial</td><td align="right">0.3335s</td><td align="right">0.3349s</td><td align="right"> 0.41%</td></tr><tr><td>🟣 <b>regex</b>:check:initial</td><td align="right">1.2597s</td><td align="right">1.2650s</td><td align="right"> 0.42%</td></tr><tr><td>🟣 <b>syn</b>:check:initial</td><td align="right">2.0521s</td><td align="right">2.0613s</td><td align="right"> 0.45%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check:initial</td><td align="right">7.8275s</td><td align="right">7.8583s</td><td align="right"> 0.39%</td></tr><tr><td>Total</td><td align="right">13.6832s</td><td align="right">13.7442s</td><td align="right"> 0.45%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">1.0046s</td><td align="right"> 0.46%</td></tr></table>
It does seem like LLVM optimizers struggle a bit with the current state of the query system.
Based on top of https://github.com/rust-lang/rust/pull/107782 and https://github.com/rust-lang/rust/pull/107802.
r? `@cjgillot`
Convert all the crates that have had their diagnostic migration
completed (except save_analysis because that will be deleted soon and
apfloat because of the licensing problem).
Abolish `QueryVTable` in favour of more assoc items on `QueryConfig`
This may introduce additional mono _but_ may help const fold things better and especially may help not constructing a `QueryVTable` anymore which is cheap but not free.
This may introduce additional mono _but_ may help const fold things
better and especially may help not constructing a `QueryVTable` anymore
which is cheap but not free.
Remove the `..` from the body, only a few invocations used it and it's
inconsistent with rust syntax.
Use `;` instead of `,` between consts. As the Rust syntax gods inteded.
This makes sure that ICEing because of def ids created outside of ast lowering will be able to produce a query backtrace and not cause a double panic because of trying to call the `def_span` query
make `error_reported` check for delayed bugs
Fixes#104768
`error_reported()` was only checking if there were errors emitted, not for `delay_bug`s which can also be a source of `ErrorGuaranteed`. I assume the same is true of `lint_err_count` but i dont know
`AddToDiagnostic::add_to_diagnostic_with` is similar to the previous
`AddToDiagnostic::add_to_diagnostic` but takes a function that can be
used by the caller to modify diagnostic messages originating from the
subdiagnostic (such as performing translation eagerly).
`add_to_diagnostic` now just calls `add_to_diagnostic_with` with an
empty closure.
Signed-off-by: David Wood <david.wood@huawei.com>
fix a ui test
use `into`
fix clippy ui test
fix a run-make-fulldeps test
implement `IntoQueryParam<DefId>` for `OwnerId`
use `OwnerId` for more queries
change the type of `ParentOwnerIterator::Item` to `(OwnerId, OwnerNode)`
FIX - ambiguous Diagnostic link in docs
UPDATE - rename diagnostic_items to IntoDiagnostic and AddToDiagnostic
[Gardening] FIX - formatting via `x fmt`
FIX - rebase conflicts. NOTE: Confirm wheather or not we want to handle TargetDataLayoutErrorsWrapper this way
DELETE - unneeded allow attributes in Handler method
FIX - broken test
FIX - Rebase conflict
UPDATE - rename residual _SessionDiagnostic and fix LintDiag link
add note for `layout_of` when query depth overflows
Fixes#101747
Added `try_find_layout_root` function to add a note for `layout_of` when query depth overflows. This would make the error in #101747 look like this:
```
error: queries overflow the depth limit!
|
note: Query depth increased by 66 when computing layout of `core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<core::option::Option<alloc::boxed::Box<alloc::string::String>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>`!
--> D:\rust-backup\parallel_rust\query_depth.rs:40:1
|
40 | fn main() {
| ^^^^^^^^^
error: aborting due to previous error
```
cc ``@semicoleon``
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
Use HashStable_Generic in rustc_type_ir
A lot of the types in this crate implemented HashStable directly to avoid circular dependencies. One way around that is to use HashStable_Generic. We adopt that here to avoid a lot of boilerplate.
This doesn't update all the types, because some would require `I: Interner + HashStable`.
r? `@cjgillot`
A lot of the types in this crate implemented HashStable directly to
avoid circular dependencies. One way around that is to use
HashStable_Generic. We adopt that here to avoid a lot of boilerplate.
This doesn't update all the types, because some would require
`I: Interner + HashStable`.
- Add a `HandleCycleError` enum to rustc_query_system, along with a `handle_cycle_error` function
- Move `Value` to rustc_query_system, so `handle_cycle_error` can use it
- Move the `Value` impls from rustc_query_impl to rustc_middle. This is necessary due to orphan rules.
Suggested by the team in this Zulip Topic https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20SessionDiagnostic.20on.20Handler
Handler already has almost all the capabilities of ParseSess when it comes to diagnostic emission, in this migration we only needed to add the ability to access source_map from the emitter in order to get a Snippet and the start_point. Not sure if this is the best way to address this gap
- Parameterize DepKindStruct over `'tcx`
This allows passing in an invariant function pointer in `query_callback`,
rather than having to try and make it work for any lifetime.
- Add a new `execute_query` function to `QueryDescription` so we can call `tcx.$name` without needing to be in a macro context
Replace `rustc_data_structures::thin_vec::ThinVec` with `thin_vec::ThinVec`
`rustc_data_structures::thin_vec::ThinVec` looks like this:
```
pub struct ThinVec<T>(Option<Box<Vec<T>>>);
```
It's just a zero word if the vector is empty, but requires two
allocations if it is non-empty. So it's only usable in cases where the
vector is empty most of the time.
This commit removes it in favour of `thin_vec::ThinVec`, which is also
word-sized, but stores the length and capacity in the same allocation as
the elements. It's good in a wider variety of situation, e.g. in enum
variants where the vector is usually/always non-empty.
The commit also:
- Sorts some `Cargo.toml` dependency lists, to make additions easier.
- Sorts some `use` item lists, to make additions easier.
- Changes `clean_trait_ref_with_bindings` to take a
`ThinVec<TypeBinding>` rather than a `&[TypeBinding]`, because this
avoid some unnecessary allocations.
r? `@spastorino`
`rustc_data_structures::thin_vec::ThinVec` looks like this:
```
pub struct ThinVec<T>(Option<Box<Vec<T>>>);
```
It's just a zero word if the vector is empty, but requires two
allocations if it is non-empty. So it's only usable in cases where the
vector is empty most of the time.
This commit removes it in favour of `thin_vec::ThinVec`, which is also
word-sized, but stores the length and capacity in the same allocation as
the elements. It's good in a wider variety of situation, e.g. in enum
variants where the vector is usually/always non-empty.
The commit also:
- Sorts some `Cargo.toml` dependency lists, to make additions easier.
- Sorts some `use` item lists, to make additions easier.
- Changes `clean_trait_ref_with_bindings` to take a
`ThinVec<TypeBinding>` rather than a `&[TypeBinding]`, because this
avoid some unnecessary allocations.
Miscellaneous inlining improvements
Add `#[inline]` to a few trivial non-generic methods from a perf report
that otherwise wouldn't be candidates for inlining.
Make lowering a query
Split from https://github.com/rust-lang/rust/pull/88186.
This PR refactors the relationship between lowering and the resolver outputs in order to make lowering itself a query.
In a first part, lowering is changed to avoid modifying resolver outputs, by maintaining its own data structures for creating new `NodeId`s and so.
Then, the `TyCtxt` is modified to allow creating new `LocalDefId`s from inside it. This is done by:
- enclosing `Definitions` in a lock, so as to allow modification;
- creating a query `register_def` whose purpose is to declare a `LocalDefId` to the query system.
See `TyCtxt::create_def` and `TyCtxt::iter_local_def_id` for more detailed explanations of the design.
Cache DWARF objects alongside object files in work products when those
exist so that DWARF object files are available for thorin in packed mode
in incremental scenarios.
Signed-off-by: David Wood <david.wood@huawei.com>
get rid of `tcx` in deadlock handler when parallel compilation
This is a very obscure and hard-to-trace problem that affects thread scheduling. If we copy `tcx` to the deadlock handler thread, it will perform unpredictable behavior and cause very weird problems when executing `try_collect_active_jobs`(For example, the deadlock handler thread suddenly preempts the content of the blocked worker thread and executes the unknown judgment branch, like #94654).
Fortunately we can avoid this behavior by precomputing `query_map`. This change fixes the following ui tests failure on my environment when set `parallel-compiler = true`:
```
[ui] src/test\ui\async-await\no-const-async.rs
[ui] src/test\ui\infinite\infinite-struct.rs
[ui] src/test\ui\infinite\infinite-tag-type-recursion.rs
[ui] src/test\ui\issues\issue-3008-1.rs
[ui] src/test\ui\issues\issue-3008-2.rs
[ui] src/test\ui\issues\issue-32326.rs
[ui] src/test\ui\issues\issue-57271.rs
[ui] src/test\ui\issues\issue-72554.rs
[ui] src/test\ui\parser\fn-header-semantic-fail.rs
[ui] src/test\ui\union\union-nonrepresentable.rs
```
Updates #75760Fixes#94654
This simplifies things, but requires making `CacheEncoder` non-generic.
(This was previously merged as commit 4 in #94732 and then was reverted
in #97905 because it caused a perf regression.)
Remove thread-local `IGNORED_ATTRIBUTES`.
It's just a copy of the read-only global `ich::IGNORED_ATTRIBUTES`, and
can be removed without any effect.
r? `@michaelwoerister`
Rename rustc_serialize::opaque::Encoder as MemEncoder.
This avoids the name clash with `rustc_serialize::Encoder` (a trait),
and allows lots qualifiers to be removed and imports to be simplified
(e.g. fewer `as` imports).
(This was previously merged as commit 5 in #94732 and then was reverted
in #97905 because of a perf regression caused by commit 4 in #94732.)
r? ```@bjorn3```
This avoids the name clash with `rustc_serialize::Encoder` (a trait),
and allows lots qualifiers to be removed and imports to be simplified
(e.g. fewer `as` imports).
(This was previously merged as commit 5 in #94732 and then was reverted
in #97905 because of a perf regression caused by commit 4 in #94732.)
This avoids the name clash with `rustc_serialize::Encoder` (a trait),
and allows lots qualifiers to be removed and imports to be simplified
(e.g. fewer `as` imports).
There are two impls of the `Encoder` trait: `opaque::Encoder` and
`opaque::FileEncoder`. The former encodes into memory and is infallible, the
latter writes to file and is fallible.
Currently, standard `Result`/`?`/`unwrap` error handling is used, but this is a
bit verbose and has non-trivial cost, which is annoying given how rare failures
are (especially in the infallible `opaque::Encoder` case).
This commit changes how `Encoder` fallibility is handled. All the `emit_*`
methods are now infallible. `opaque::Encoder` requires no great changes for
this. `opaque::FileEncoder` now implements a delayed error handling strategy.
If a failure occurs, it records this via the `res` field, and all subsequent
encoding operations are skipped if `res` indicates an error has occurred. Once
encoding is complete, the new `finish` method is called, which returns a
`Result`. In other words, there is now a single `Result`-producing method
instead of many of them.
This has very little effect on how any file errors are reported if
`opaque::FileEncoder` has any failures.
Much of this commit is boring mechanical changes, removing `Result` return
values and `?` or `unwrap` from expressions. The more interesting parts are as
follows.
- serialize.rs: The `Encoder` trait gains an `Ok` associated type. The
`into_inner` method is changed into `finish`, which returns
`Result<Vec<u8>, !>`.
- opaque.rs: The `FileEncoder` adopts the delayed error handling
strategy. Its `Ok` type is a `usize`, returning the number of bytes
written, replacing previous uses of `FileEncoder::position`.
- Various methods that take an encoder now consume it, rather than being
passed a mutable reference, e.g. `serialize_query_result_cache`.
