Dnsmasq

Dnsmasq is an integrated DNS, DHCP and TFTP server for small networks.

Configuration

An authoritative DHCP and DNS server on a home network

On a home network, you can use Dnsmasq as a DHCP and DNS server. New devices on your network will be configured by Dnsmasq, and instructed to use it as the DNS server by default. This allows you to rely on your own server to perform DNS queries and caching, with DNSSEC enabled.

The following example assumes that

you have disabled your router's integrated DHCP server, if it has one
your router's address is set in
your system's Ethernet interface is eth0
you have configured the address(es) to forward DNS queries in

{
  services.dnsmasq = {
    enable = true;
    settings = {
      interface = "eth0";
      bind-interfaces = true; # Only bind to the specified interface
      dhcp-authoritative = true; # Should be set when dnsmasq is definitely the only DHCP server on a network

      server = config.networking.nameservers; # Upstream dns servers to which requests should be forwarded

      dhcp-host = [
        # Give the current system a fixed address of 192.168.0.254
        "dc:a6:32:0b:ea:b9,192.168.0.254,${config.networking.hostName},infinite"
      ];

      dhcp-option = [
        # Address of the gateway, i.e. your router
        "option:router,${config.networking.defaultGateway.address}"
      ];

      dhcp-range = [
        # Range of IPv4 addresses to give out
        # <range start>,<range end>,<lease time>
        "192.168.0.10,192.168.0.253,24h"
        # Enable stateless IPv6 allocation
        "::f,::ff,constructor:eth0,ra-stateless"
      ];

      dhcp-rapid-commit = true; # Faster DHCP negotiation for IPv6
      local-service = true; # Accept DNS queries only from hosts whose address is on a local subnet
      log-queries = true; # Log results of all DNS queries
      bogus-priv = true; # Don't forward requests for the local address ranges (192.168.x.x etc) to upstream nameservers
      domain-needed = true; # Don't forward requests without dots or domain parts to upstream nameservers

      dnssec = true; # Enable DNSSEC
      # DNSSEC trust anchor. Source: https://data.iana.org/root-anchors/root-anchors.xml
      trust-anchor = ".,20326,8,2,E06D44B80B8F1D39A95C0B0D7C65D08458E880409BBC683457104237C7F8EC8D";
    };
  };
}

References

Upstream website: https://dnsmasq.org
Manpage: https://dnsmasq.org/docs/dnsmasq-man.html
FAQ: https://dnsmasq.org/docs/FAQ

2.7 KiB Raw Blame History

Dnsmasq

Configuration

An authoritative DHCP and DNS server on a home network

References

2.7 KiB

Raw Blame History