platform.uname.processor seems to be what we want in many more cases
than what we were using before — it does the right thing for aarch64,
x86_64, riscv32, riscv64, mips, mips64, powerpc, and powerpc64 (the
latter three of which were broken before).
This fixes cross-compilation of systemd for PowerPC/POWER platforms.
Derivations listed as disallowedReferences or disallowedRequisites,
currently end up as build-time dependencies.
This is problematic since the disallowed derivations will be built by nix as
build-time dependencies, while those derivations might take a very long time
to build, or might not even build successfully on the platform used.
However, in order to scan for disallowed references in the final output,
knowing the out path is sufficient, and the out path can be calculated from
the derivation without needing to build it, saving time and resources.
While the problem is less severe for allowedReferences and allowedRequisites,
since we want the derivation to be built eventually, we would still like to
get the error early and without having to wait while nix builds a derivation
that might not be used (e.g. if we listed the wrong one).
Some other packages, for example ruby gems via buildRubyGem, use a
variable called "type" internally, which is overwritten here and
causes failures like:
failure: $gempkg path unspecified
Fix for changes in 11c3127e38.
this is intentional to support both structuredAttrs and non
In pkgs/stdenv/generic/setup.sh line 614:
for pkg in ${depsBuildBuild[@]} ${depsBuildBuildPropagated[@]}; do
^------------------^ SC2068 (error): Double quote array expansions to avoid re-splitting elements.
In pkgs/stdenv/generic/setup.sh line 521:
local varRef="$varVar[$((targetOffset - hostOffset))]"
^-- SC1087 (error): Use braces when expanding arrays, e.g. ${array[idx]} (or ${var}[.. to quiet).
exit -1 == exit 255 but we don't have a reason to use 255
In pkgs/stdenv/generic/setup.sh line 518:
(( hostOffset <= targetOffset )) || exit -1
^-- SC2242 (error): Can only exit with status 0-255. Other data should be wri
tten to stdout/stderr.
we use [*] to support structuredAttrs and non
In pkgs/stdenv/generic/setup.sh line 1542:
for curPhase in ${phases[*]}; do
^----------^ SC2048 (warning): Use "${array[@]}" (with quotes) to prevent whitespace problems.
In pkgs/stdenv/generic/setup.sh line 101:
source "$hookName"
^---------^ SC1090 (warning): ShellCheck can't follow non-constant source. Use a directive to specify location.
In pkgs/stdenv/generic/setup.sh line 166:
mkdir -p "$out/nix-support"
^--^ SC2154 (warning): out is referenced but not assigned.
In pkgs/stdenv/generic/setup.sh line 407:
PATH=
^--^ SC2123 (warning): PATH is the shell search path. Use another name.
In pkgs/stdenv/generic/setup.sh line 452:
declare -a pkgBuildAccumVars=(pkgsBuildBuild pkgsBuildHost pkgsBuildTarget)
^---------------^ SC2034 (warning): pkgBuildAccumVars appears unused. Verify use (or export if used e
xternally).
because pkgBuildAccumVars is used
In pkgs/stdenv/generic/setup.sh line 235:
nameref="$* ${nameref-}"
^-----^ SC2178 (warning): Variable was used as an array but is now assigned a string.
because we theres a useArray conditional
In pkgs/stdenv/generic/setup.sh line 36:
: ${outputs:=out}
^-------------^ SC2223 (info): This default assignment may cause DoS due to globbing. Quote it.
`hasUnsupportedPlatform` was not updated with #37395, so it does not
understand attrsets in `meta.[bad]platforms`. In particular,
attrsets in `meta.badPlatforms` will "fail open" and be ignored.
Let's use `lib.meta.availableOn` instead of duplicating its logic.
Thanks to @alyssais for [noticing][1].
[1][https://github.com/NixOS/nixpkgs/pull/194148#discussion_r990817610]
Co-authored-by: sternenseemann <sternenseemann@systemli.org>
otherwise the build just fails with 'make: *** No rule to make target 'install'. Stop.'
and update buildPhase message
i don't know if the 'makefile may have been created in buildPhase' is
true but i guess it might be possible
The documentation for `meta.sourceProvenance` in
`doc/stdenv/meta.chapter.md` says: "the `meta.sourceProvenance`
attribute should be a list containing one or more value..."
Let's update check-meta.nix to require that `meta.sourceProvenance` is
a list, as the documentation says, rather than a single element.
Adding two extra keystrokes `[` and `]` when filling out this field is
an insignificant burden for package authors, and being able to assume
that the `meta.sourceProvenance` field is always a list greatly
simplifies any code that acts on the value of this field.
Since `meta.sourceProvenance` was just merged a few hours ago now is
the easiest time to fix this: nobody is using the feature yet.
Without the change we don't propagate `enableParallelBuilding = true`
and leave most builds sequential.
Noticed on `mythtv` package which did not specify parallelism and
`config.enableParallelBuildingByDefault = true` had no effect.
Derivations not using `__structuredAttrs` should not attempt to set
environment variables from `env`.
Derivations using `__structuredAttrs` should fail if `env` is not
exportable.
Co-authored-by: Robin Gloster <mail@glob.in>
stdenv: print message if structuredAttrs is enabled
stdenv: add _append
reduces the chance of a user doing it wrong
fix nix develop issue
output hooks don't work yet in nix develop though
making $outputs be the same on non-structuredAttrs and structuredAttrs
is too much trouble.
lets instead make a function that gets the output names
reading environment file '/nix/store/2x7m69a2sm2kh0r6v0q5s9z1dh41m4xf-xz-5.2.5-env-bin'
nix: src/nix/develop.cc:299: std::string Common::makeRcScript(nix::ref<nix::Store>, const BuildEnvironment&, const Path&): Assertion `outputs != buildEnvironment.vars.end()' failed.
use a function to get all output names instead of using $outputs
copy env functionality from https://github.com/NixOS/nixpkgs/pull/76732/commits
In specific cases, combining the `checkMeta` and `checkMetaRecursively`
config options would result in `error: infinite recursion encountered`
fixes#193296
This is needed in order to mark a certain derivation containing a Nix
expression tarball to Hydra so that it is recognised as a channel.
When I first got an evaluation error due to using this meta attribute, I
was under the impression that nobody outside of Vuizvui[1] is using this
feature and that we don't have any occurrence of isHydraChannel in
Nixpkgs.
However, when working around[2] the issue I assumed that it's not
something that should be included in Nixpkgs because we're not using it
there.
It turned out that my assumption was wrong and we *do* use the attribute
in Nixpkgs, namely via releaseTools.channel, which is similar to what
we're doing in Vuizvui.
Since we already include a bunch of undocumented attributes in
metaTypes, it only makes sense to add isHydraChannel as well since it's
actually documented in the Hydra documentation[3].
[1]: https://github.com/openlab-aux/vuizvui
[2]: https://github.com/openlab-aux/vuizvui/commit/e0685e81b3fdc43a272f0
[3]: 53335323ae/doc/manual/src/jobs.md (meta-fields)
Signed-off-by: aszlig <aszlig@nix.build>
Passing `-l$NIX_BUILD_CORES` improperly limits the overall system load.
For a build machine which is configured to run `$B` builds where each
build gets `total cores / B` cores (`$C`), passing `-l $C` to make will
improperly limit the load to `$C` instead of `$B * $C`.
This effect becomes quite pronounced on machines with 80 cores, with
40 simultaneous builds and a cores limit of 2. On a machine with this
configuration, Nix will run 40 builds and make will limit the overall
system load to approximately 2. A build machine with this many cores
can happily run with a load approaching 80.
A non-solution is to oversubscribe the machine, by picking a larger
`$C`. However, there is no way to divide the number of cores in a way
which fairly subdivides the available cores when `$B` is greater than
1.
There has been exploration of passing a jobserver in to the sandbox,
or sharing a jobserver between all the builds. This is one option, but
relatively complicated and only supports make. Lots of other software
uses its own implementation of `-j` and doesn't support either `-l` or
the Make jobserver.
For the case of an interactive user machine, the user should limit
overall system load using `$B`, `$C`, and optionally systemd's
cpu/network/io limiting features.
Making this change should significantly improve the utilization of our
build farm, and improve the throughput of Hydra.
inherit_errexit wasn’t available in bash 3. We have a check to show a
nice error message, but that check is after we set inherit_errexit in
setup.sh. So we can just move this to below the BASH_VERSINFO check.
the motivation for this is to simplify stdenv and ease the job of
reviewers due to them needing to tell contributors about the defacto
rule that mesonFlags should be a list of strings
the motivation for this is to simplify stdenv and ease the job of
reviewers due to them needing to tell contributors about the defacto
rule that cmakeFlags should be a list of strings
Closes#178625
The `busybox` version of `mktemp` requires exactly six `X` characters
in the argument to `mktemp`, unlike the `coreutils` version of `mktemp`.
Let's accomodate packages, like `epson-escpr2`, which fool `setup.sh`
into using the `busybox` version instead of the `stdenv` version.
it may be what the license handling code does, but it's confusing and not very useful
Co-authored-by: Adam Joseph <54836058+a-m-joseph@users.noreply.github.com>
libtool's libtool.m4 script assumes that `file` is available, and can
be found at `/usr/bin/file` (this path is hardwired). Furthermore,
the script with this assumption is vendored into the ./configure
scripts of an enormous number of packages. Without this commit, you
will frequently see errors like this during the configurePhase with
the sandbox enabled:
./configure: line 9595: /usr/bin/file: command not found
Due mostly to luck, this error does not affect native compiles on
nixpkgs' two most popular platforms, x86_64-linux and aarch64-linux.
However it will cause incorrect linker flag detection and a failure to
generate shared libraries for sandboxed cross-builds to a x86_64-linux
host as well as any sandboxed build (cross or native) for the following
hosts: x86_64-freebsd, *-hpux, *-irix, mips64*-linux, powerpc*-linux,
s390x-linux, s390x-tpf, sparc-linux, and *-solaris.
This commit fixes the problem by adding an extra line to fixLibtool()
in pkgs/stdenv/generic/setup.sh. This extra line will scan the
unpacked source code for executable files named "configure" which
contain the following text:
'GNU Libtool is free software; you can redistribute it and/or modify'
This text is taken to be an indicator of a vendored libtool.m4. When
it is found, the configure script containing it is subjected to `sed
-i s_/usr/bin/file_file_` which replaces all occurrences of
`/usr/bin/file` with `file`.
Additionally, the `file` package is now considered to be part of
`stdenv`. It has been added to `common-path.nix` so that the `file`
binary will be found in the `$PATH` of every build, except for the
bootstrap-tools and the first few stages of stdenv boostrapping.
Verified no regressions under:
nix-build --arg pkgs 'import ./. {}' ./lib/tests/release.nix
This commit allows the following commands to complete, which should
enable Hydra to produce bootstrap-files for mips64el:
nix-build \
--option sandbox true \
--option sandbox-fallback false \
pkgs/top-level/release-cross.nix \
-A bootstrapTools.mips64el-linux-gnuabi64.build
nix-build \
--option sandbox true \
--option sandbox-fallback false \
. \
-A pkgsCross.mips64el-linux-gnuabi64.nix_2_4
Instead of requiring the platforms be equal, use `isCompatible` to
determine if we can execute tests. The upside of this is that we now
can execute tests for natively cross compiled package sets like
pkgsStatic, pkgsLLVM and pkgsCross.musl64 etc.
the motivation for this is to simplify stdenv and ease the job of
reviewers due to them needing to tell contributors about the defacto
rule that configureFlags should be a list of strings
This warning logs when a package has no maintainers. It will stay silent
if `meta.maintainers` is not set at all, only complaining when it is an
empty list. In the future a separate warning could be added to allow for
that stricter behavior. Or this warning could be changed.
This will allow for adding more validity types in the future, such as a
warning type. (which is in the next commit in this series)
This is NOT a breaking change because validity.valid is never exposed
outside of `stdenv.mkDerivation`.
This isn't really desirable in general, but given that Nix itself
currently relies on this behaviour and that we don't want to break
backwards compatibility we should support it for now, maybe
deprecating it in the future.
This change is prompted by the following, admittedly cursed tarball:
```
> curl https://registry.npmjs.org/char-regex/-/char-regex-1.0.2.tgz 2>/dev/null \
| tar -ztv
drw-rw-rw- 0/0 0 2020-02-18 10:50 package
-rw-rw-rw- 0/0 297 2020-02-18 10:50 package/index.d.ts
-rw-rw-rw- 0/0 1920 2020-02-18 10:50 package/index.js
-rw-rw-rw- 0/0 1092 2020-01-31 11:31 package/LICENSE
-rw-rw-rw- 0/0 937 2020-02-18 10:51 package/package.json
-rw-rw-rw- 0/0 713 2020-02-18 10:50 package/README.md
```
The minimal reproducer for the issue is the following derivation trying
to work around the uid 0 issue with `dontMakeSourcesWritable = true`:
```nix
{ stdenv, fetchurl }:
stdenv.mkDerivation {
name = "test";
src = fetchurl {
sha1 = "d744358226217f981ed58f479b1d6bcc29545dcf";
url = "https://registry.npmjs.org/char-regex/-/char-regex-1.0.2.tgz";
};
dontMakeSourcesWritable = true;
installPhase = ''
cp -R . $out
'';
}
```
This currently fails in the following way:
```
these derivations will be built:
/nix/store/pc3jbydl0xcc8nrndf5xkf7hdhpgpb41-test.drv
building '/nix/store/pc3jbydl0xcc8nrndf5xkf7hdhpgpb41-test.drv'...
unpacking sources
unpacking source archive /nix/store/v9p98kqplf4kflmy91p0687xlvr6klb1-char-regex-1.0.2.tgz
source root is package
find: 'package/index.d.ts': Permission denied
find: 'package/index.js': Permission denied
find: 'package/LICENSE': Permission denied
find: 'package/package.json': Permission denied
find: 'package/README.md': Permission denied
/nix/store/6c47azxacncswc1pllzj28zfzqw40d7c-stdenv-linux/setup: line 1311: cd: package: Permission denied
builder for '/nix/store/pc3jbydl0xcc8nrndf5xkf7hdhpgpb41-test.drv' failed with exit code 1
error: build of '/nix/store/pc3jbydl0xcc8nrndf5xkf7hdhpgpb41-test.drv' failed
```
As you can see, the issue is that `$sourceRoot` isn't executable,
prohibiting the call to `cd`. This can be fixed by running
`chmod +x "${sourceRoot}"` before `cd` regardless of
`dontMakeSourcesWritable` in `unpackPhase` since if `chmod` fails, `cd`
would fail as well and we are out of options.
Verified that the workaround works locally.
Another thing to investigate is investigating if we should use
`--no-same-owner` for `tar` and if it helps in this case as well.
See also <https://github.com/Profpatsch/yarn2nix/issues/56>.
Flake users that use a command like `nix build nixpkgs#hello` on a
broken/insecure package will not be able to use an environment variable
to override that behavior, unless they pass `--impure` to the command.
Co-authored-by: pkharvey <kayharvey@protonmail.com>
Add `shellDryRun` to the generic stdenv and substitute it for uses of
`${stdenv.shell} -n`. The point of this layer of abstraction is to add
the flag `-O extglob`, which resolves#126344 in a more direct way.
Packages that use libtool run it as a wrapper around the linker.
Before calling the linker, libtool will determine what libraries would
be linked, and check if there's a corresponding libtool
archive (libfoo.la) file in the same directory . This file
contains extra information about the library. This is especially
important for static linking, because static archives don't contain
dependency information, so we need libtool to use the .la files to
figure out which libraries actually need to be linked against.
But in Nixpkgs, this has never worked. libtool isn't able to find any
libraries, because only the compiler wrapper knows how to find them,
and the compiler wrapper is opaque to libtool. This is why
pkgsStatic.util-linuxMinimal doesn't build prior to this patch — it
depends on libpam, which depends on libaudit, and if libtool can't
find the .la file, nothing will tell the linker to also link against
libaudit when linking libpam. (It was previously possible to build a
static util-linux, because linux-pam only recently had the audit
dependency added.)
There are a couple of ways we could fix this, so that libtool knows
where to look for .la files.
* Set LD_LIBRARY_PATH/DYLD_LIBRARY_PATH/whatever, which libtool will
examine. This would have major side effects though, because the
dynamic linker looks at it too.
* Inject libtool scripts with the appropriate information. That's
what I've done here. It was the obvious choice because we're
already finding and modifying the libtool scripts, to remove paths
outside the Nix store that libtool might check in unsandboxed
builds. Instead of emptying out the system paths, we can
repopulate it with our own library paths.
(We can't use a wrapper like we do for other tools in Nixpkgs, because
libtool scripts are often distributed in source tarballs, so we can't
just add a wrapped version of libtool as a dependency. That's why
there's already the fixLibtool function in stdenv.)
With this change, libtool is able to discover .la files, and
pkgsStatic.util-linuxMinimal can build again, linking correctly
against libpam and libaudit.
This reverts commit 488395c0f8.
Currently, `nix print-dev-env` fails to execute if this function is present, because of its use of hex literals.
Until this issue (https://github.com/NixOS/nix/issues/5262) is solved, we should revert this to prevent breakage.
somehow `read -N 0` behavior changed in bash 5. `read -d ''` has identical behavior
the purpose of the function is to read stdin and exit 1 on a null byte (i.e. if stdin is the content of a binary)
(cherry picked from commit 5d0acf20f8)
